| /* |
| * drivers/video/aty/radeon_base.c |
| * |
| * framebuffer driver for ATI Radeon chipset video boards |
| * |
| * Copyright 2003 Ben. Herrenschmidt <benh@kernel.crashing.org> |
| * Copyright 2000 Ani Joshi <ajoshi@kernel.crashing.org> |
| * |
| * i2c bits from Luca Tettamanti <kronos@kronoz.cjb.net> |
| * |
| * Special thanks to ATI DevRel team for their hardware donations. |
| * |
| * ...Insert GPL boilerplate here... |
| * |
| * Significant portions of this driver apdated from XFree86 Radeon |
| * driver which has the following copyright notice: |
| * |
| * Copyright 2000 ATI Technologies Inc., Markham, Ontario, and |
| * VA Linux Systems Inc., Fremont, California. |
| * |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining |
| * a copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation on the rights to use, copy, modify, merge, |
| * publish, distribute, sublicense, and/or sell copies of the Software, |
| * and to permit persons to whom the Software is furnished to do so, |
| * subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial |
| * portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NON-INFRINGEMENT. IN NO EVENT SHALL ATI, VA LINUX SYSTEMS AND/OR |
| * THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| * |
| * XFree86 driver authors: |
| * |
| * Kevin E. Martin <martin@xfree86.org> |
| * Rickard E. Faith <faith@valinux.com> |
| * Alan Hourihane <alanh@fairlite.demon.co.uk> |
| * |
| */ |
| |
| |
| #define RADEON_VERSION "0.2.0" |
| |
| #include "radeonfb.h" |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/ctype.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/time.h> |
| #include <linux/fb.h> |
| #include <linux/ioport.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/vmalloc.h> |
| #include <linux/device.h> |
| |
| #include <asm/io.h> |
| #include <linux/uaccess.h> |
| |
| #ifdef CONFIG_PPC |
| |
| #include "../macmodes.h" |
| |
| #ifdef CONFIG_BOOTX_TEXT |
| #include <asm/btext.h> |
| #endif |
| |
| #endif /* CONFIG_PPC */ |
| |
| #include <video/radeon.h> |
| #include <linux/radeonfb.h> |
| |
| #include "../edid.h" // MOVE THAT TO include/video |
| #include "ati_ids.h" |
| |
| #define MAX_MAPPED_VRAM (2048*2048*4) |
| #define MIN_MAPPED_VRAM (1024*768*1) |
| |
| #define CHIP_DEF(id, family, flags) \ |
| { PCI_VENDOR_ID_ATI, id, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (flags) | (CHIP_FAMILY_##family) } |
| |
| static const struct pci_device_id radeonfb_pci_table[] = { |
| /* Radeon Xpress 200m */ |
| CHIP_DEF(PCI_CHIP_RS480_5955, RS480, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RS482_5975, RS480, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY), |
| /* Mobility M6 */ |
| CHIP_DEF(PCI_CHIP_RADEON_LY, RV100, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RADEON_LZ, RV100, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| /* Radeon VE/7000 */ |
| CHIP_DEF(PCI_CHIP_RV100_QY, RV100, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV100_QZ, RV100, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RN50, RV100, CHIP_HAS_CRTC2), |
| /* Radeon IGP320M (U1) */ |
| CHIP_DEF(PCI_CHIP_RS100_4336, RS100, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY), |
| /* Radeon IGP320 (A3) */ |
| CHIP_DEF(PCI_CHIP_RS100_4136, RS100, CHIP_HAS_CRTC2 | CHIP_IS_IGP), |
| /* IGP330M/340M/350M (U2) */ |
| CHIP_DEF(PCI_CHIP_RS200_4337, RS200, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY), |
| /* IGP330/340/350 (A4) */ |
| CHIP_DEF(PCI_CHIP_RS200_4137, RS200, CHIP_HAS_CRTC2 | CHIP_IS_IGP), |
| /* Mobility 7000 IGP */ |
| CHIP_DEF(PCI_CHIP_RS250_4437, RS200, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY), |
| /* 7000 IGP (A4+) */ |
| CHIP_DEF(PCI_CHIP_RS250_4237, RS200, CHIP_HAS_CRTC2 | CHIP_IS_IGP), |
| /* 8500 AIW */ |
| CHIP_DEF(PCI_CHIP_R200_BB, R200, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R200_BC, R200, CHIP_HAS_CRTC2), |
| /* 8700/8800 */ |
| CHIP_DEF(PCI_CHIP_R200_QH, R200, CHIP_HAS_CRTC2), |
| /* 8500 */ |
| CHIP_DEF(PCI_CHIP_R200_QL, R200, CHIP_HAS_CRTC2), |
| /* 9100 */ |
| CHIP_DEF(PCI_CHIP_R200_QM, R200, CHIP_HAS_CRTC2), |
| /* Mobility M7 */ |
| CHIP_DEF(PCI_CHIP_RADEON_LW, RV200, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RADEON_LX, RV200, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| /* 7500 */ |
| CHIP_DEF(PCI_CHIP_RV200_QW, RV200, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV200_QX, RV200, CHIP_HAS_CRTC2), |
| /* Mobility M9 */ |
| CHIP_DEF(PCI_CHIP_RV250_Ld, RV250, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RV250_Le, RV250, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RV250_Lf, RV250, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RV250_Lg, RV250, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| /* 9000/Pro */ |
| CHIP_DEF(PCI_CHIP_RV250_If, RV250, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV250_Ig, RV250, CHIP_HAS_CRTC2), |
| |
| CHIP_DEF(PCI_CHIP_RC410_5A62, RC410, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY), |
| /* Mobility 9100 IGP (U3) */ |
| CHIP_DEF(PCI_CHIP_RS300_5835, RS300, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RS350_7835, RS300, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY), |
| /* 9100 IGP (A5) */ |
| CHIP_DEF(PCI_CHIP_RS300_5834, RS300, CHIP_HAS_CRTC2 | CHIP_IS_IGP), |
| CHIP_DEF(PCI_CHIP_RS350_7834, RS300, CHIP_HAS_CRTC2 | CHIP_IS_IGP), |
| /* Mobility 9200 (M9+) */ |
| CHIP_DEF(PCI_CHIP_RV280_5C61, RV280, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RV280_5C63, RV280, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| /* 9200 */ |
| CHIP_DEF(PCI_CHIP_RV280_5960, RV280, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV280_5961, RV280, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV280_5962, RV280, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV280_5964, RV280, CHIP_HAS_CRTC2), |
| /* 9500 */ |
| CHIP_DEF(PCI_CHIP_R300_AD, R300, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R300_AE, R300, CHIP_HAS_CRTC2), |
| /* 9600TX / FireGL Z1 */ |
| CHIP_DEF(PCI_CHIP_R300_AF, R300, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R300_AG, R300, CHIP_HAS_CRTC2), |
| /* 9700/9500/Pro/FireGL X1 */ |
| CHIP_DEF(PCI_CHIP_R300_ND, R300, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R300_NE, R300, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R300_NF, R300, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R300_NG, R300, CHIP_HAS_CRTC2), |
| /* Mobility M10/M11 */ |
| CHIP_DEF(PCI_CHIP_RV350_NP, RV350, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RV350_NQ, RV350, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RV350_NR, RV350, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RV350_NS, RV350, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RV350_NT, RV350, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RV350_NV, RV350, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| /* 9600/FireGL T2 */ |
| CHIP_DEF(PCI_CHIP_RV350_AP, RV350, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV350_AQ, RV350, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV360_AR, RV350, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV350_AS, RV350, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV350_AT, RV350, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV350_AV, RV350, CHIP_HAS_CRTC2), |
| /* 9800/Pro/FileGL X2 */ |
| CHIP_DEF(PCI_CHIP_R350_AH, R350, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R350_AI, R350, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R350_AJ, R350, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R350_AK, R350, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R350_NH, R350, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R350_NI, R350, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R360_NJ, R350, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R350_NK, R350, CHIP_HAS_CRTC2), |
| /* Newer stuff */ |
| CHIP_DEF(PCI_CHIP_RV380_3E50, RV380, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV380_3E54, RV380, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV380_3150, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RV380_3154, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RV370_5B60, RV380, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV370_5B62, RV380, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV370_5B63, RV380, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV370_5B64, RV380, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV370_5B65, RV380, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_RV370_5460, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_RV370_5464, RV380, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_R420_JH, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R420_JI, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R420_JJ, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R420_JK, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R420_JL, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R420_JM, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R420_JN, R420, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), |
| CHIP_DEF(PCI_CHIP_R420_JP, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R423_UH, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R423_UI, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R423_UJ, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R423_UK, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R423_UQ, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R423_UR, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R423_UT, R420, CHIP_HAS_CRTC2), |
| CHIP_DEF(PCI_CHIP_R423_5D57, R420, CHIP_HAS_CRTC2), |
| /* Original Radeon/7200 */ |
| CHIP_DEF(PCI_CHIP_RADEON_QD, RADEON, 0), |
| CHIP_DEF(PCI_CHIP_RADEON_QE, RADEON, 0), |
| CHIP_DEF(PCI_CHIP_RADEON_QF, RADEON, 0), |
| CHIP_DEF(PCI_CHIP_RADEON_QG, RADEON, 0), |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, radeonfb_pci_table); |
| |
| |
| typedef struct { |
| u16 reg; |
| u32 val; |
| } reg_val; |
| |
| |
| /* these common regs are cleared before mode setting so they do not |
| * interfere with anything |
| */ |
| static reg_val common_regs[] = { |
| { OVR_CLR, 0 }, |
| { OVR_WID_LEFT_RIGHT, 0 }, |
| { OVR_WID_TOP_BOTTOM, 0 }, |
| { OV0_SCALE_CNTL, 0 }, |
| { SUBPIC_CNTL, 0 }, |
| { VIPH_CONTROL, 0 }, |
| { I2C_CNTL_1, 0 }, |
| { GEN_INT_CNTL, 0 }, |
| { CAP0_TRIG_CNTL, 0 }, |
| { CAP1_TRIG_CNTL, 0 }, |
| }; |
| |
| /* |
| * globals |
| */ |
| |
| static char *mode_option; |
| static char *monitor_layout; |
| static bool noaccel = 0; |
| static int default_dynclk = -2; |
| static bool nomodeset = 0; |
| static bool ignore_edid = 0; |
| static bool mirror = 0; |
| static int panel_yres = 0; |
| static bool force_dfp = 0; |
| static bool force_measure_pll = 0; |
| static bool nomtrr = 0; |
| static bool force_sleep; |
| static bool ignore_devlist; |
| #ifdef CONFIG_PMAC_BACKLIGHT |
| static int backlight = 1; |
| #else |
| static int backlight = 0; |
| #endif |
| |
| /* Note about this function: we have some rare cases where we must not schedule, |
| * this typically happen with our special "wake up early" hook which allows us to |
| * wake up the graphic chip (and thus get the console back) before everything else |
| * on some machines that support that mechanism. At this point, interrupts are off |
| * and scheduling is not permitted |
| */ |
| void _radeon_msleep(struct radeonfb_info *rinfo, unsigned long ms) |
| { |
| if (rinfo->no_schedule || oops_in_progress) |
| mdelay(ms); |
| else |
| msleep(ms); |
| } |
| |
| void radeon_pll_errata_after_index_slow(struct radeonfb_info *rinfo) |
| { |
| /* Called if (rinfo->errata & CHIP_ERRATA_PLL_DUMMYREADS) is set */ |
| (void)INREG(CLOCK_CNTL_DATA); |
| (void)INREG(CRTC_GEN_CNTL); |
| } |
| |
| void radeon_pll_errata_after_data_slow(struct radeonfb_info *rinfo) |
| { |
| if (rinfo->errata & CHIP_ERRATA_PLL_DELAY) { |
| /* we can't deal with posted writes here ... */ |
| _radeon_msleep(rinfo, 5); |
| } |
| if (rinfo->errata & CHIP_ERRATA_R300_CG) { |
| u32 save, tmp; |
| save = INREG(CLOCK_CNTL_INDEX); |
| tmp = save & ~(0x3f | PLL_WR_EN); |
| OUTREG(CLOCK_CNTL_INDEX, tmp); |
| tmp = INREG(CLOCK_CNTL_DATA); |
| OUTREG(CLOCK_CNTL_INDEX, save); |
| } |
| } |
| |
| void _OUTREGP(struct radeonfb_info *rinfo, u32 addr, u32 val, u32 mask) |
| { |
| unsigned long flags; |
| unsigned int tmp; |
| |
| spin_lock_irqsave(&rinfo->reg_lock, flags); |
| tmp = INREG(addr); |
| tmp &= (mask); |
| tmp |= (val); |
| OUTREG(addr, tmp); |
| spin_unlock_irqrestore(&rinfo->reg_lock, flags); |
| } |
| |
| u32 __INPLL(struct radeonfb_info *rinfo, u32 addr) |
| { |
| u32 data; |
| |
| OUTREG8(CLOCK_CNTL_INDEX, addr & 0x0000003f); |
| radeon_pll_errata_after_index(rinfo); |
| data = INREG(CLOCK_CNTL_DATA); |
| radeon_pll_errata_after_data(rinfo); |
| return data; |
| } |
| |
| void __OUTPLL(struct radeonfb_info *rinfo, unsigned int index, u32 val) |
| { |
| OUTREG8(CLOCK_CNTL_INDEX, (index & 0x0000003f) | 0x00000080); |
| radeon_pll_errata_after_index(rinfo); |
| OUTREG(CLOCK_CNTL_DATA, val); |
| radeon_pll_errata_after_data(rinfo); |
| } |
| |
| void __OUTPLLP(struct radeonfb_info *rinfo, unsigned int index, |
| u32 val, u32 mask) |
| { |
| unsigned int tmp; |
| |
| tmp = __INPLL(rinfo, index); |
| tmp &= (mask); |
| tmp |= (val); |
| __OUTPLL(rinfo, index, tmp); |
| } |
| |
| void _radeon_fifo_wait(struct radeonfb_info *rinfo, int entries) |
| { |
| int i; |
| |
| for (i=0; i<2000000; i++) { |
| if ((INREG(RBBM_STATUS) & 0x7f) >= entries) |
| return; |
| udelay(1); |
| } |
| printk(KERN_ERR "radeonfb: FIFO Timeout !\n"); |
| } |
| |
| void radeon_engine_flush(struct radeonfb_info *rinfo) |
| { |
| int i; |
| |
| /* Initiate flush */ |
| OUTREGP(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL, |
| ~RB2D_DC_FLUSH_ALL); |
| |
| /* Ensure FIFO is empty, ie, make sure the flush commands |
| * has reached the cache |
| */ |
| _radeon_fifo_wait(rinfo, 64); |
| |
| /* Wait for the flush to complete */ |
| for (i=0; i < 2000000; i++) { |
| if (!(INREG(DSTCACHE_CTLSTAT) & RB2D_DC_BUSY)) |
| return; |
| udelay(1); |
| } |
| printk(KERN_ERR "radeonfb: Flush Timeout !\n"); |
| } |
| |
| void _radeon_engine_idle(struct radeonfb_info *rinfo) |
| { |
| int i; |
| |
| /* ensure FIFO is empty before waiting for idle */ |
| _radeon_fifo_wait(rinfo, 64); |
| |
| for (i=0; i<2000000; i++) { |
| if (((INREG(RBBM_STATUS) & GUI_ACTIVE)) == 0) { |
| radeon_engine_flush(rinfo); |
| return; |
| } |
| udelay(1); |
| } |
| printk(KERN_ERR "radeonfb: Idle Timeout !\n"); |
| } |
| |
| |
| |
| static void radeon_unmap_ROM(struct radeonfb_info *rinfo, struct pci_dev *dev) |
| { |
| if (!rinfo->bios_seg) |
| return; |
| pci_unmap_rom(dev, rinfo->bios_seg); |
| } |
| |
| static int radeon_map_ROM(struct radeonfb_info *rinfo, struct pci_dev *dev) |
| { |
| void __iomem *rom; |
| u16 dptr; |
| u8 rom_type; |
| size_t rom_size; |
| |
| /* If this is a primary card, there is a shadow copy of the |
| * ROM somewhere in the first meg. We will just ignore the copy |
| * and use the ROM directly. |
| */ |
| |
| /* Fix from ATI for problem with Radeon hardware not leaving ROM enabled */ |
| unsigned int temp; |
| temp = INREG(MPP_TB_CONFIG); |
| temp &= 0x00ffffffu; |
| temp |= 0x04 << 24; |
| OUTREG(MPP_TB_CONFIG, temp); |
| temp = INREG(MPP_TB_CONFIG); |
| |
| rom = pci_map_rom(dev, &rom_size); |
| if (!rom) { |
| printk(KERN_ERR "radeonfb (%s): ROM failed to map\n", |
| pci_name(rinfo->pdev)); |
| return -ENOMEM; |
| } |
| |
| rinfo->bios_seg = rom; |
| |
| /* Very simple test to make sure it appeared */ |
| if (BIOS_IN16(0) != 0xaa55) { |
| printk(KERN_DEBUG "radeonfb (%s): Invalid ROM signature %x " |
| "should be 0xaa55\n", |
| pci_name(rinfo->pdev), BIOS_IN16(0)); |
| goto failed; |
| } |
| /* Look for the PCI data to check the ROM type */ |
| dptr = BIOS_IN16(0x18); |
| |
| /* Check the PCI data signature. If it's wrong, we still assume a normal x86 ROM |
| * for now, until I've verified this works everywhere. The goal here is more |
| * to phase out Open Firmware images. |
| * |
| * Currently, we only look at the first PCI data, we could iteratre and deal with |
| * them all, and we should use fb_bios_start relative to start of image and not |
| * relative start of ROM, but so far, I never found a dual-image ATI card |
| * |
| * typedef struct { |
| * u32 signature; + 0x00 |
| * u16 vendor; + 0x04 |
| * u16 device; + 0x06 |
| * u16 reserved_1; + 0x08 |
| * u16 dlen; + 0x0a |
| * u8 drevision; + 0x0c |
| * u8 class_hi; + 0x0d |
| * u16 class_lo; + 0x0e |
| * u16 ilen; + 0x10 |
| * u16 irevision; + 0x12 |
| * u8 type; + 0x14 |
| * u8 indicator; + 0x15 |
| * u16 reserved_2; + 0x16 |
| * } pci_data_t; |
| */ |
| if (BIOS_IN32(dptr) != (('R' << 24) | ('I' << 16) | ('C' << 8) | 'P')) { |
| printk(KERN_WARNING "radeonfb (%s): PCI DATA signature in ROM" |
| "incorrect: %08x\n", pci_name(rinfo->pdev), BIOS_IN32(dptr)); |
| goto anyway; |
| } |
| rom_type = BIOS_IN8(dptr + 0x14); |
| switch(rom_type) { |
| case 0: |
| printk(KERN_INFO "radeonfb: Found Intel x86 BIOS ROM Image\n"); |
| break; |
| case 1: |
| printk(KERN_INFO "radeonfb: Found Open Firmware ROM Image\n"); |
| goto failed; |
| case 2: |
| printk(KERN_INFO "radeonfb: Found HP PA-RISC ROM Image\n"); |
| goto failed; |
| default: |
| printk(KERN_INFO "radeonfb: Found unknown type %d ROM Image\n", rom_type); |
| goto failed; |
| } |
| anyway: |
| /* Locate the flat panel infos, do some sanity checking !!! */ |
| rinfo->fp_bios_start = BIOS_IN16(0x48); |
| return 0; |
| |
| failed: |
| rinfo->bios_seg = NULL; |
| radeon_unmap_ROM(rinfo, dev); |
| return -ENXIO; |
| } |
| |
| #ifdef CONFIG_X86 |
| static int radeon_find_mem_vbios(struct radeonfb_info *rinfo) |
| { |
| /* I simplified this code as we used to miss the signatures in |
| * a lot of case. It's now closer to XFree, we just don't check |
| * for signatures at all... Something better will have to be done |
| * if we end up having conflicts |
| */ |
| u32 segstart; |
| void __iomem *rom_base = NULL; |
| |
| for(segstart=0x000c0000; segstart<0x000f0000; segstart+=0x00001000) { |
| rom_base = ioremap(segstart, 0x10000); |
| if (rom_base == NULL) |
| return -ENOMEM; |
| if (readb(rom_base) == 0x55 && readb(rom_base + 1) == 0xaa) |
| break; |
| iounmap(rom_base); |
| rom_base = NULL; |
| } |
| if (rom_base == NULL) |
| return -ENXIO; |
| |
| /* Locate the flat panel infos, do some sanity checking !!! */ |
| rinfo->bios_seg = rom_base; |
| rinfo->fp_bios_start = BIOS_IN16(0x48); |
| |
| return 0; |
| } |
| #endif |
| |
| #if defined(CONFIG_PPC) || defined(CONFIG_SPARC) |
| /* |
| * Read XTAL (ref clock), SCLK and MCLK from Open Firmware device |
| * tree. Hopefully, ATI OF driver is kind enough to fill these |
| */ |
| static int radeon_read_xtal_OF(struct radeonfb_info *rinfo) |
| { |
| struct device_node *dp = rinfo->of_node; |
| const u32 *val; |
| |
| if (dp == NULL) |
| return -ENODEV; |
| val = of_get_property(dp, "ATY,RefCLK", NULL); |
| if (!val || !*val) { |
| printk(KERN_WARNING "radeonfb: No ATY,RefCLK property !\n"); |
| return -EINVAL; |
| } |
| |
| rinfo->pll.ref_clk = (*val) / 10; |
| |
| val = of_get_property(dp, "ATY,SCLK", NULL); |
| if (val && *val) |
| rinfo->pll.sclk = (*val) / 10; |
| |
| val = of_get_property(dp, "ATY,MCLK", NULL); |
| if (val && *val) |
| rinfo->pll.mclk = (*val) / 10; |
| |
| return 0; |
| } |
| #endif /* CONFIG_PPC || CONFIG_SPARC */ |
| |
| /* |
| * Read PLL infos from chip registers |
| */ |
| static int radeon_probe_pll_params(struct radeonfb_info *rinfo) |
| { |
| unsigned char ppll_div_sel; |
| unsigned Ns, Nm, M; |
| unsigned sclk, mclk, tmp, ref_div; |
| int hTotal, vTotal, num, denom, m, n; |
| unsigned long long hz, vclk; |
| long xtal; |
| struct timeval start_tv, stop_tv; |
| long total_secs, total_usecs; |
| int i; |
| |
| /* Ugh, we cut interrupts, bad bad bad, but we want some precision |
| * here, so... --BenH |
| */ |
| |
| /* Flush PCI buffers ? */ |
| tmp = INREG16(DEVICE_ID); |
| |
| local_irq_disable(); |
| |
| for(i=0; i<1000000; i++) |
| if (((INREG(CRTC_VLINE_CRNT_VLINE) >> 16) & 0x3ff) == 0) |
| break; |
| |
| do_gettimeofday(&start_tv); |
| |
| for(i=0; i<1000000; i++) |
| if (((INREG(CRTC_VLINE_CRNT_VLINE) >> 16) & 0x3ff) != 0) |
| break; |
| |
| for(i=0; i<1000000; i++) |
| if (((INREG(CRTC_VLINE_CRNT_VLINE) >> 16) & 0x3ff) == 0) |
| break; |
| |
| do_gettimeofday(&stop_tv); |
| |
| local_irq_enable(); |
| |
| total_secs = stop_tv.tv_sec - start_tv.tv_sec; |
| if (total_secs > 10) |
| return -1; |
| total_usecs = stop_tv.tv_usec - start_tv.tv_usec; |
| total_usecs += total_secs * 1000000; |
| if (total_usecs < 0) |
| total_usecs = -total_usecs; |
| hz = 1000000/total_usecs; |
| |
| hTotal = ((INREG(CRTC_H_TOTAL_DISP) & 0x1ff) + 1) * 8; |
| vTotal = ((INREG(CRTC_V_TOTAL_DISP) & 0x3ff) + 1); |
| vclk = (long long)hTotal * (long long)vTotal * hz; |
| |
| switch((INPLL(PPLL_REF_DIV) & 0x30000) >> 16) { |
| case 0: |
| default: |
| num = 1; |
| denom = 1; |
| break; |
| case 1: |
| n = ((INPLL(M_SPLL_REF_FB_DIV) >> 16) & 0xff); |
| m = (INPLL(M_SPLL_REF_FB_DIV) & 0xff); |
| num = 2*n; |
| denom = 2*m; |
| break; |
| case 2: |
| n = ((INPLL(M_SPLL_REF_FB_DIV) >> 8) & 0xff); |
| m = (INPLL(M_SPLL_REF_FB_DIV) & 0xff); |
| num = 2*n; |
| denom = 2*m; |
| break; |
| } |
| |
| ppll_div_sel = INREG8(CLOCK_CNTL_INDEX + 1) & 0x3; |
| radeon_pll_errata_after_index(rinfo); |
| |
| n = (INPLL(PPLL_DIV_0 + ppll_div_sel) & 0x7ff); |
| m = (INPLL(PPLL_REF_DIV) & 0x3ff); |
| |
| num *= n; |
| denom *= m; |
| |
| switch ((INPLL(PPLL_DIV_0 + ppll_div_sel) >> 16) & 0x7) { |
| case 1: |
| denom *= 2; |
| break; |
| case 2: |
| denom *= 4; |
| break; |
| case 3: |
| denom *= 8; |
| break; |
| case 4: |
| denom *= 3; |
| break; |
| case 6: |
| denom *= 6; |
| break; |
| case 7: |
| denom *= 12; |
| break; |
| } |
| |
| vclk *= denom; |
| do_div(vclk, 1000 * num); |
| xtal = vclk; |
| |
| if ((xtal > 26900) && (xtal < 27100)) |
| xtal = 2700; |
| else if ((xtal > 14200) && (xtal < 14400)) |
| xtal = 1432; |
| else if ((xtal > 29400) && (xtal < 29600)) |
| xtal = 2950; |
| else { |
| printk(KERN_WARNING "xtal calculation failed: %ld\n", xtal); |
| return -1; |
| } |
| |
| tmp = INPLL(M_SPLL_REF_FB_DIV); |
| ref_div = INPLL(PPLL_REF_DIV) & 0x3ff; |
| |
| Ns = (tmp & 0xff0000) >> 16; |
| Nm = (tmp & 0xff00) >> 8; |
| M = (tmp & 0xff); |
| sclk = round_div((2 * Ns * xtal), (2 * M)); |
| mclk = round_div((2 * Nm * xtal), (2 * M)); |
| |
| /* we're done, hopefully these are sane values */ |
| rinfo->pll.ref_clk = xtal; |
| rinfo->pll.ref_div = ref_div; |
| rinfo->pll.sclk = sclk; |
| rinfo->pll.mclk = mclk; |
| |
| return 0; |
| } |
| |
| /* |
| * Retrieve PLL infos by different means (BIOS, Open Firmware, register probing...) |
| */ |
| static void radeon_get_pllinfo(struct radeonfb_info *rinfo) |
| { |
| /* |
| * In the case nothing works, these are defaults; they are mostly |
| * incomplete, however. It does provide ppll_max and _min values |
| * even for most other methods, however. |
| */ |
| switch (rinfo->chipset) { |
| case PCI_DEVICE_ID_ATI_RADEON_QW: |
| case PCI_DEVICE_ID_ATI_RADEON_QX: |
| rinfo->pll.ppll_max = 35000; |
| rinfo->pll.ppll_min = 12000; |
| rinfo->pll.mclk = 23000; |
| rinfo->pll.sclk = 23000; |
| rinfo->pll.ref_clk = 2700; |
| break; |
| case PCI_DEVICE_ID_ATI_RADEON_QL: |
| case PCI_DEVICE_ID_ATI_RADEON_QN: |
| case PCI_DEVICE_ID_ATI_RADEON_QO: |
| case PCI_DEVICE_ID_ATI_RADEON_Ql: |
| case PCI_DEVICE_ID_ATI_RADEON_BB: |
| rinfo->pll.ppll_max = 35000; |
| rinfo->pll.ppll_min = 12000; |
| rinfo->pll.mclk = 27500; |
| rinfo->pll.sclk = 27500; |
| rinfo->pll.ref_clk = 2700; |
| break; |
| case PCI_DEVICE_ID_ATI_RADEON_Id: |
| case PCI_DEVICE_ID_ATI_RADEON_Ie: |
| case PCI_DEVICE_ID_ATI_RADEON_If: |
| case PCI_DEVICE_ID_ATI_RADEON_Ig: |
| rinfo->pll.ppll_max = 35000; |
| rinfo->pll.ppll_min = 12000; |
| rinfo->pll.mclk = 25000; |
| rinfo->pll.sclk = 25000; |
| rinfo->pll.ref_clk = 2700; |
| break; |
| case PCI_DEVICE_ID_ATI_RADEON_ND: |
| case PCI_DEVICE_ID_ATI_RADEON_NE: |
| case PCI_DEVICE_ID_ATI_RADEON_NF: |
| case PCI_DEVICE_ID_ATI_RADEON_NG: |
| rinfo->pll.ppll_max = 40000; |
| rinfo->pll.ppll_min = 20000; |
| rinfo->pll.mclk = 27000; |
| rinfo->pll.sclk = 27000; |
| rinfo->pll.ref_clk = 2700; |
| break; |
| case PCI_DEVICE_ID_ATI_RADEON_QD: |
| case PCI_DEVICE_ID_ATI_RADEON_QE: |
| case PCI_DEVICE_ID_ATI_RADEON_QF: |
| case PCI_DEVICE_ID_ATI_RADEON_QG: |
| default: |
| rinfo->pll.ppll_max = 35000; |
| rinfo->pll.ppll_min = 12000; |
| rinfo->pll.mclk = 16600; |
| rinfo->pll.sclk = 16600; |
| rinfo->pll.ref_clk = 2700; |
| break; |
| } |
| rinfo->pll.ref_div = INPLL(PPLL_REF_DIV) & PPLL_REF_DIV_MASK; |
| |
| |
| #if defined(CONFIG_PPC) || defined(CONFIG_SPARC) |
| /* |
| * Retrieve PLL infos from Open Firmware first |
| */ |
| if (!force_measure_pll && radeon_read_xtal_OF(rinfo) == 0) { |
| printk(KERN_INFO "radeonfb: Retrieved PLL infos from Open Firmware\n"); |
| goto found; |
| } |
| #endif /* CONFIG_PPC || CONFIG_SPARC */ |
| |
| /* |
| * Check out if we have an X86 which gave us some PLL informations |
| * and if yes, retrieve them |
| */ |
| if (!force_measure_pll && rinfo->bios_seg) { |
| u16 pll_info_block = BIOS_IN16(rinfo->fp_bios_start + 0x30); |
| |
| rinfo->pll.sclk = BIOS_IN16(pll_info_block + 0x08); |
| rinfo->pll.mclk = BIOS_IN16(pll_info_block + 0x0a); |
| rinfo->pll.ref_clk = BIOS_IN16(pll_info_block + 0x0e); |
| rinfo->pll.ref_div = BIOS_IN16(pll_info_block + 0x10); |
| rinfo->pll.ppll_min = BIOS_IN32(pll_info_block + 0x12); |
| rinfo->pll.ppll_max = BIOS_IN32(pll_info_block + 0x16); |
| |
| printk(KERN_INFO "radeonfb: Retrieved PLL infos from BIOS\n"); |
| goto found; |
| } |
| |
| /* |
| * We didn't get PLL parameters from either OF or BIOS, we try to |
| * probe them |
| */ |
| if (radeon_probe_pll_params(rinfo) == 0) { |
| printk(KERN_INFO "radeonfb: Retrieved PLL infos from registers\n"); |
| goto found; |
| } |
| |
| /* |
| * Fall back to already-set defaults... |
| */ |
| printk(KERN_INFO "radeonfb: Used default PLL infos\n"); |
| |
| found: |
| /* |
| * Some methods fail to retrieve SCLK and MCLK values, we apply default |
| * settings in this case (200Mhz). If that really happens often, we |
| * could fetch from registers instead... |
| */ |
| if (rinfo->pll.mclk == 0) |
| rinfo->pll.mclk = 20000; |
| if (rinfo->pll.sclk == 0) |
| rinfo->pll.sclk = 20000; |
| |
| printk("radeonfb: Reference=%d.%02d MHz (RefDiv=%d) Memory=%d.%02d Mhz, System=%d.%02d MHz\n", |
| rinfo->pll.ref_clk / 100, rinfo->pll.ref_clk % 100, |
| rinfo->pll.ref_div, |
| rinfo->pll.mclk / 100, rinfo->pll.mclk % 100, |
| rinfo->pll.sclk / 100, rinfo->pll.sclk % 100); |
| printk("radeonfb: PLL min %d max %d\n", rinfo->pll.ppll_min, rinfo->pll.ppll_max); |
| } |
| |
| static int radeonfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| struct radeonfb_info *rinfo = info->par; |
| struct fb_var_screeninfo v; |
| int nom, den; |
| unsigned int pitch; |
| |
| if (radeon_match_mode(rinfo, &v, var)) |
| return -EINVAL; |
| |
| switch (v.bits_per_pixel) { |
| case 0 ... 8: |
| v.bits_per_pixel = 8; |
| break; |
| case 9 ... 16: |
| v.bits_per_pixel = 16; |
| break; |
| case 17 ... 24: |
| #if 0 /* Doesn't seem to work */ |
| v.bits_per_pixel = 24; |
| break; |
| #endif |
| return -EINVAL; |
| case 25 ... 32: |
| v.bits_per_pixel = 32; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (var_to_depth(&v)) { |
| case 8: |
| nom = den = 1; |
| v.red.offset = v.green.offset = v.blue.offset = 0; |
| v.red.length = v.green.length = v.blue.length = 8; |
| v.transp.offset = v.transp.length = 0; |
| break; |
| case 15: |
| nom = 2; |
| den = 1; |
| v.red.offset = 10; |
| v.green.offset = 5; |
| v.blue.offset = 0; |
| v.red.length = v.green.length = v.blue.length = 5; |
| v.transp.offset = v.transp.length = 0; |
| break; |
| case 16: |
| nom = 2; |
| den = 1; |
| v.red.offset = 11; |
| v.green.offset = 5; |
| v.blue.offset = 0; |
| v.red.length = 5; |
| v.green.length = 6; |
| v.blue.length = 5; |
| v.transp.offset = v.transp.length = 0; |
| break; |
| case 24: |
| nom = 4; |
| den = 1; |
| v.red.offset = 16; |
| v.green.offset = 8; |
| v.blue.offset = 0; |
| v.red.length = v.blue.length = v.green.length = 8; |
| v.transp.offset = v.transp.length = 0; |
| break; |
| case 32: |
| nom = 4; |
| den = 1; |
| v.red.offset = 16; |
| v.green.offset = 8; |
| v.blue.offset = 0; |
| v.red.length = v.blue.length = v.green.length = 8; |
| v.transp.offset = 24; |
| v.transp.length = 8; |
| break; |
| default: |
| printk ("radeonfb: mode %dx%dx%d rejected, color depth invalid\n", |
| var->xres, var->yres, var->bits_per_pixel); |
| return -EINVAL; |
| } |
| |
| if (v.yres_virtual < v.yres) |
| v.yres_virtual = v.yres; |
| if (v.xres_virtual < v.xres) |
| v.xres_virtual = v.xres; |
| |
| |
| /* XXX I'm adjusting xres_virtual to the pitch, that may help XFree |
| * with some panels, though I don't quite like this solution |
| */ |
| if (rinfo->info->flags & FBINFO_HWACCEL_DISABLED) { |
| v.xres_virtual = v.xres_virtual & ~7ul; |
| } else { |
| pitch = ((v.xres_virtual * ((v.bits_per_pixel + 1) / 8) + 0x3f) |
| & ~(0x3f)) >> 6; |
| v.xres_virtual = (pitch << 6) / ((v.bits_per_pixel + 1) / 8); |
| } |
| |
| if (((v.xres_virtual * v.yres_virtual * nom) / den) > rinfo->mapped_vram) |
| return -EINVAL; |
| |
| if (v.xres_virtual < v.xres) |
| v.xres = v.xres_virtual; |
| |
| if (v.xoffset > v.xres_virtual - v.xres) |
| v.xoffset = v.xres_virtual - v.xres - 1; |
| |
| if (v.yoffset > v.yres_virtual - v.yres) |
| v.yoffset = v.yres_virtual - v.yres - 1; |
| |
| v.red.msb_right = v.green.msb_right = v.blue.msb_right = |
| v.transp.offset = v.transp.length = |
| v.transp.msb_right = 0; |
| |
| memcpy(var, &v, sizeof(v)); |
| |
| return 0; |
| } |
| |
| |
| static int radeonfb_pan_display (struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| struct radeonfb_info *rinfo = info->par; |
| |
| if ((var->xoffset + info->var.xres > info->var.xres_virtual) |
| || (var->yoffset + info->var.yres > info->var.yres_virtual)) |
| return -EINVAL; |
| |
| if (rinfo->asleep) |
| return 0; |
| |
| radeon_fifo_wait(2); |
| OUTREG(CRTC_OFFSET, (var->yoffset * info->fix.line_length + |
| var->xoffset * info->var.bits_per_pixel / 8) & ~7); |
| return 0; |
| } |
| |
| |
| static int radeonfb_ioctl (struct fb_info *info, unsigned int cmd, |
| unsigned long arg) |
| { |
| struct radeonfb_info *rinfo = info->par; |
| unsigned int tmp; |
| u32 value = 0; |
| int rc; |
| |
| switch (cmd) { |
| /* |
| * TODO: set mirror accordingly for non-Mobility chipsets with 2 CRTC's |
| * and do something better using 2nd CRTC instead of just hackish |
| * routing to second output |
| */ |
| case FBIO_RADEON_SET_MIRROR: |
| if (!rinfo->is_mobility) |
| return -EINVAL; |
| |
| rc = get_user(value, (__u32 __user *)arg); |
| |
| if (rc) |
| return rc; |
| |
| radeon_fifo_wait(2); |
| if (value & 0x01) { |
| tmp = INREG(LVDS_GEN_CNTL); |
| |
| tmp |= (LVDS_ON | LVDS_BLON); |
| } else { |
| tmp = INREG(LVDS_GEN_CNTL); |
| |
| tmp &= ~(LVDS_ON | LVDS_BLON); |
| } |
| |
| OUTREG(LVDS_GEN_CNTL, tmp); |
| |
| if (value & 0x02) { |
| tmp = INREG(CRTC_EXT_CNTL); |
| tmp |= CRTC_CRT_ON; |
| |
| mirror = 1; |
| } else { |
| tmp = INREG(CRTC_EXT_CNTL); |
| tmp &= ~CRTC_CRT_ON; |
| |
| mirror = 0; |
| } |
| |
| OUTREG(CRTC_EXT_CNTL, tmp); |
| |
| return 0; |
| case FBIO_RADEON_GET_MIRROR: |
| if (!rinfo->is_mobility) |
| return -EINVAL; |
| |
| tmp = INREG(LVDS_GEN_CNTL); |
| if ((LVDS_ON | LVDS_BLON) & tmp) |
| value |= 0x01; |
| |
| tmp = INREG(CRTC_EXT_CNTL); |
| if (CRTC_CRT_ON & tmp) |
| value |= 0x02; |
| |
| return put_user(value, (__u32 __user *)arg); |
| default: |
| return -EINVAL; |
| } |
| |
| return -EINVAL; |
| } |
| |
| |
| int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch) |
| { |
| u32 val; |
| u32 tmp_pix_clks; |
| int unblank = 0; |
| |
| if (rinfo->lock_blank) |
| return 0; |
| |
| radeon_engine_idle(); |
| |
| val = INREG(CRTC_EXT_CNTL); |
| val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS | |
| CRTC_VSYNC_DIS); |
| switch (blank) { |
| case FB_BLANK_VSYNC_SUSPEND: |
| val |= (CRTC_DISPLAY_DIS | CRTC_VSYNC_DIS); |
| break; |
| case FB_BLANK_HSYNC_SUSPEND: |
| val |= (CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS); |
| break; |
| case FB_BLANK_POWERDOWN: |
| val |= (CRTC_DISPLAY_DIS | CRTC_VSYNC_DIS | |
| CRTC_HSYNC_DIS); |
| break; |
| case FB_BLANK_NORMAL: |
| val |= CRTC_DISPLAY_DIS; |
| break; |
| case FB_BLANK_UNBLANK: |
| default: |
| unblank = 1; |
| } |
| OUTREG(CRTC_EXT_CNTL, val); |
| |
| |
| switch (rinfo->mon1_type) { |
| case MT_DFP: |
| if (unblank) |
| OUTREGP(FP_GEN_CNTL, (FP_FPON | FP_TMDS_EN), |
| ~(FP_FPON | FP_TMDS_EN)); |
| else { |
| if (mode_switch || blank == FB_BLANK_NORMAL) |
| break; |
| OUTREGP(FP_GEN_CNTL, 0, ~(FP_FPON | FP_TMDS_EN)); |
| } |
| break; |
| case MT_LCD: |
| del_timer_sync(&rinfo->lvds_timer); |
| val = INREG(LVDS_GEN_CNTL); |
| if (unblank) { |
| u32 target_val = (val & ~LVDS_DISPLAY_DIS) | LVDS_BLON | LVDS_ON |
| | LVDS_EN | (rinfo->init_state.lvds_gen_cntl |
| & (LVDS_DIGON | LVDS_BL_MOD_EN)); |
| if ((val ^ target_val) == LVDS_DISPLAY_DIS) |
| OUTREG(LVDS_GEN_CNTL, target_val); |
| else if ((val ^ target_val) != 0) { |
| OUTREG(LVDS_GEN_CNTL, target_val |
| & ~(LVDS_ON | LVDS_BL_MOD_EN)); |
| rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK; |
| rinfo->init_state.lvds_gen_cntl |= |
| target_val & LVDS_STATE_MASK; |
| if (mode_switch) { |
| radeon_msleep(rinfo->panel_info.pwr_delay); |
| OUTREG(LVDS_GEN_CNTL, target_val); |
| } |
| else { |
| rinfo->pending_lvds_gen_cntl = target_val; |
| mod_timer(&rinfo->lvds_timer, |
| jiffies + |
| msecs_to_jiffies(rinfo->panel_info.pwr_delay)); |
| } |
| } |
| } else { |
| val |= LVDS_DISPLAY_DIS; |
| OUTREG(LVDS_GEN_CNTL, val); |
| |
| /* We don't do a full switch-off on a simple mode switch */ |
| if (mode_switch || blank == FB_BLANK_NORMAL) |
| break; |
| |
| /* Asic bug, when turning off LVDS_ON, we have to make sure |
| * RADEON_PIXCLK_LVDS_ALWAYS_ON bit is off |
| */ |
| tmp_pix_clks = INPLL(PIXCLKS_CNTL); |
| if (rinfo->is_mobility || rinfo->is_IGP) |
| OUTPLLP(PIXCLKS_CNTL, 0, ~PIXCLK_LVDS_ALWAYS_ONb); |
| val &= ~(LVDS_BL_MOD_EN); |
| OUTREG(LVDS_GEN_CNTL, val); |
| udelay(100); |
| val &= ~(LVDS_ON | LVDS_EN); |
| OUTREG(LVDS_GEN_CNTL, val); |
| val &= ~LVDS_DIGON; |
| rinfo->pending_lvds_gen_cntl = val; |
| mod_timer(&rinfo->lvds_timer, |
| jiffies + |
| msecs_to_jiffies(rinfo->panel_info.pwr_delay)); |
| rinfo->init_state.lvds_gen_cntl &= ~LVDS_STATE_MASK; |
| rinfo->init_state.lvds_gen_cntl |= val & LVDS_STATE_MASK; |
| if (rinfo->is_mobility || rinfo->is_IGP) |
| OUTPLL(PIXCLKS_CNTL, tmp_pix_clks); |
| } |
| break; |
| case MT_CRT: |
| // todo: powerdown DAC |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int radeonfb_blank (int blank, struct fb_info *info) |
| { |
| struct radeonfb_info *rinfo = info->par; |
| |
| if (rinfo->asleep) |
| return 0; |
| |
| return radeon_screen_blank(rinfo, blank, 0); |
| } |
| |
| static int radeon_setcolreg (unsigned regno, unsigned red, unsigned green, |
| unsigned blue, unsigned transp, |
| struct radeonfb_info *rinfo) |
| { |
| u32 pindex; |
| unsigned int i; |
| |
| |
| if (regno > 255) |
| return -EINVAL; |
| |
| red >>= 8; |
| green >>= 8; |
| blue >>= 8; |
| rinfo->palette[regno].red = red; |
| rinfo->palette[regno].green = green; |
| rinfo->palette[regno].blue = blue; |
| |
| /* default */ |
| pindex = regno; |
| |
| if (!rinfo->asleep) { |
| radeon_fifo_wait(9); |
| |
| if (rinfo->bpp == 16) { |
| pindex = regno * 8; |
| |
| if (rinfo->depth == 16 && regno > 63) |
| return -EINVAL; |
| if (rinfo->depth == 15 && regno > 31) |
| return -EINVAL; |
| |
| /* For 565, the green component is mixed one order |
| * below |
| */ |
| if (rinfo->depth == 16) { |
| OUTREG(PALETTE_INDEX, pindex>>1); |
| OUTREG(PALETTE_DATA, |
| (rinfo->palette[regno>>1].red << 16) | |
| (green << 8) | |
| (rinfo->palette[regno>>1].blue)); |
| green = rinfo->palette[regno<<1].green; |
| } |
| } |
| |
| if (rinfo->depth != 16 || regno < 32) { |
| OUTREG(PALETTE_INDEX, pindex); |
| OUTREG(PALETTE_DATA, (red << 16) | |
| (green << 8) | blue); |
| } |
| } |
| if (regno < 16) { |
| u32 *pal = rinfo->info->pseudo_palette; |
| switch (rinfo->depth) { |
| case 15: |
| pal[regno] = (regno << 10) | (regno << 5) | regno; |
| break; |
| case 16: |
| pal[regno] = (regno << 11) | (regno << 5) | regno; |
| break; |
| case 24: |
| pal[regno] = (regno << 16) | (regno << 8) | regno; |
| break; |
| case 32: |
| i = (regno << 8) | regno; |
| pal[regno] = (i << 16) | i; |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| static int radeonfb_setcolreg (unsigned regno, unsigned red, unsigned green, |
| unsigned blue, unsigned transp, |
| struct fb_info *info) |
| { |
| struct radeonfb_info *rinfo = info->par; |
| u32 dac_cntl2, vclk_cntl = 0; |
| int rc; |
| |
| if (!rinfo->asleep) { |
| if (rinfo->is_mobility) { |
| vclk_cntl = INPLL(VCLK_ECP_CNTL); |
| OUTPLL(VCLK_ECP_CNTL, |
| vclk_cntl & ~PIXCLK_DAC_ALWAYS_ONb); |
| } |
| |
| /* Make sure we are on first palette */ |
| if (rinfo->has_CRTC2) { |
| dac_cntl2 = INREG(DAC_CNTL2); |
| dac_cntl2 &= ~DAC2_PALETTE_ACCESS_CNTL; |
| OUTREG(DAC_CNTL2, dac_cntl2); |
| } |
| } |
| |
| rc = radeon_setcolreg (regno, red, green, blue, transp, rinfo); |
| |
| if (!rinfo->asleep && rinfo->is_mobility) |
| OUTPLL(VCLK_ECP_CNTL, vclk_cntl); |
| |
| return rc; |
| } |
| |
| static int radeonfb_setcmap(struct fb_cmap *cmap, struct fb_info *info) |
| { |
| struct radeonfb_info *rinfo = info->par; |
| u16 *red, *green, *blue, *transp; |
| u32 dac_cntl2, vclk_cntl = 0; |
| int i, start, rc = 0; |
| |
| if (!rinfo->asleep) { |
| if (rinfo->is_mobility) { |
| vclk_cntl = INPLL(VCLK_ECP_CNTL); |
| OUTPLL(VCLK_ECP_CNTL, |
| vclk_cntl & ~PIXCLK_DAC_ALWAYS_ONb); |
| } |
| |
| /* Make sure we are on first palette */ |
| if (rinfo->has_CRTC2) { |
| dac_cntl2 = INREG(DAC_CNTL2); |
| dac_cntl2 &= ~DAC2_PALETTE_ACCESS_CNTL; |
| OUTREG(DAC_CNTL2, dac_cntl2); |
| } |
| } |
| |
| red = cmap->red; |
| green = cmap->green; |
| blue = cmap->blue; |
| transp = cmap->transp; |
| start = cmap->start; |
| |
| for (i = 0; i < cmap->len; i++) { |
| u_int hred, hgreen, hblue, htransp = 0xffff; |
| |
| hred = *red++; |
| hgreen = *green++; |
| hblue = *blue++; |
| if (transp) |
| htransp = *transp++; |
| rc = radeon_setcolreg (start++, hred, hgreen, hblue, htransp, |
| rinfo); |
| if (rc) |
| break; |
| } |
| |
| if (!rinfo->asleep && rinfo->is_mobility) |
| OUTPLL(VCLK_ECP_CNTL, vclk_cntl); |
| |
| return rc; |
| } |
| |
| static void radeon_save_state (struct radeonfb_info *rinfo, |
| struct radeon_regs *save) |
| { |
| /* CRTC regs */ |
| save->crtc_gen_cntl = INREG(CRTC_GEN_CNTL); |
| save->crtc_ext_cntl = INREG(CRTC_EXT_CNTL); |
| save->crtc_more_cntl = INREG(CRTC_MORE_CNTL); |
| save->dac_cntl = INREG(DAC_CNTL); |
| save->crtc_h_total_disp = INREG(CRTC_H_TOTAL_DISP); |
| save->crtc_h_sync_strt_wid = INREG(CRTC_H_SYNC_STRT_WID); |
| save->crtc_v_total_disp = INREG(CRTC_V_TOTAL_DISP); |
| save->crtc_v_sync_strt_wid = INREG(CRTC_V_SYNC_STRT_WID); |
| save->crtc_pitch = INREG(CRTC_PITCH); |
| save->surface_cntl = INREG(SURFACE_CNTL); |
| |
| /* FP regs */ |
| save->fp_crtc_h_total_disp = INREG(FP_CRTC_H_TOTAL_DISP); |
| save->fp_crtc_v_total_disp = INREG(FP_CRTC_V_TOTAL_DISP); |
| save->fp_gen_cntl = INREG(FP_GEN_CNTL); |
| save->fp_h_sync_strt_wid = INREG(FP_H_SYNC_STRT_WID); |
| save->fp_horz_stretch = INREG(FP_HORZ_STRETCH); |
| save->fp_v_sync_strt_wid = INREG(FP_V_SYNC_STRT_WID); |
| save->fp_vert_stretch = INREG(FP_VERT_STRETCH); |
| save->lvds_gen_cntl = INREG(LVDS_GEN_CNTL); |
| save->lvds_pll_cntl = INREG(LVDS_PLL_CNTL); |
| save->tmds_crc = INREG(TMDS_CRC); |
| save->tmds_transmitter_cntl = INREG(TMDS_TRANSMITTER_CNTL); |
| save->vclk_ecp_cntl = INPLL(VCLK_ECP_CNTL); |
| |
| /* PLL regs */ |
| save->clk_cntl_index = INREG(CLOCK_CNTL_INDEX) & ~0x3f; |
| radeon_pll_errata_after_index(rinfo); |
| save->ppll_div_3 = INPLL(PPLL_DIV_3); |
| save->ppll_ref_div = INPLL(PPLL_REF_DIV); |
| } |
| |
| |
| static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_regs *mode) |
| { |
| int i; |
| |
| radeon_fifo_wait(20); |
| |
| /* Workaround from XFree */ |
| if (rinfo->is_mobility) { |
| /* A temporal workaround for the occasional blanking on certain laptop |
| * panels. This appears to related to the PLL divider registers |
| * (fail to lock?). It occurs even when all dividers are the same |
| * with their old settings. In this case we really don't need to |
| * fiddle with PLL registers. By doing this we can avoid the blanking |
| * problem with some panels. |
| */ |
| if ((mode->ppll_ref_div == (INPLL(PPLL_REF_DIV) & PPLL_REF_DIV_MASK)) && |
| (mode->ppll_div_3 == (INPLL(PPLL_DIV_3) & |
| (PPLL_POST3_DIV_MASK | PPLL_FB3_DIV_MASK)))) { |
| /* We still have to force a switch to selected PPLL div thanks to |
| * an XFree86 driver bug which will switch it away in some cases |
| * even when using UseFDev */ |
| OUTREGP(CLOCK_CNTL_INDEX, |
| mode->clk_cntl_index & PPLL_DIV_SEL_MASK, |
| ~PPLL_DIV_SEL_MASK); |
| radeon_pll_errata_after_index(rinfo); |
| radeon_pll_errata_after_data(rinfo); |
| return; |
| } |
| } |
| |
| /* Swich VCKL clock input to CPUCLK so it stays fed while PPLL updates*/ |
| OUTPLLP(VCLK_ECP_CNTL, VCLK_SRC_SEL_CPUCLK, ~VCLK_SRC_SEL_MASK); |
| |
| /* Reset PPLL & enable atomic update */ |
| OUTPLLP(PPLL_CNTL, |
| PPLL_RESET | PPLL_ATOMIC_UPDATE_EN | PPLL_VGA_ATOMIC_UPDATE_EN, |
| ~(PPLL_RESET | PPLL_ATOMIC_UPDATE_EN | PPLL_VGA_ATOMIC_UPDATE_EN)); |
| |
| /* Switch to selected PPLL divider */ |
| OUTREGP(CLOCK_CNTL_INDEX, |
| mode->clk_cntl_index & PPLL_DIV_SEL_MASK, |
| ~PPLL_DIV_SEL_MASK); |
| radeon_pll_errata_after_index(rinfo); |
| radeon_pll_errata_after_data(rinfo); |
| |
| /* Set PPLL ref. div */ |
| if (IS_R300_VARIANT(rinfo) || |
| rinfo->family == CHIP_FAMILY_RS300 || |
| rinfo->family == CHIP_FAMILY_RS400 || |
| rinfo->family == CHIP_FAMILY_RS480) { |
| if (mode->ppll_ref_div & R300_PPLL_REF_DIV_ACC_MASK) { |
| /* When restoring console mode, use saved PPLL_REF_DIV |
| * setting. |
| */ |
| OUTPLLP(PPLL_REF_DIV, mode->ppll_ref_div, 0); |
| } else { |
| /* R300 uses ref_div_acc field as real ref divider */ |
| OUTPLLP(PPLL_REF_DIV, |
| (mode->ppll_ref_div << R300_PPLL_REF_DIV_ACC_SHIFT), |
| ~R300_PPLL_REF_DIV_ACC_MASK); |
| } |
| } else |
| OUTPLLP(PPLL_REF_DIV, mode->ppll_ref_div, ~PPLL_REF_DIV_MASK); |
| |
| /* Set PPLL divider 3 & post divider*/ |
| OUTPLLP(PPLL_DIV_3, mode->ppll_div_3, ~PPLL_FB3_DIV_MASK); |
| OUTPLLP(PPLL_DIV_3, mode->ppll_div_3, ~PPLL_POST3_DIV_MASK); |
| |
| /* Write update */ |
| while (INPLL(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R) |
| ; |
| OUTPLLP(PPLL_REF_DIV, PPLL_ATOMIC_UPDATE_W, ~PPLL_ATOMIC_UPDATE_W); |
| |
| /* Wait read update complete */ |
| /* FIXME: Certain revisions of R300 can't recover here. Not sure of |
| the cause yet, but this workaround will mask the problem for now. |
| Other chips usually will pass at the very first test, so the |
| workaround shouldn't have any effect on them. */ |
| for (i = 0; (i < 10000 && INPLL(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R); i++) |
| ; |
| |
| OUTPLL(HTOTAL_CNTL, 0); |
| |
| /* Clear reset & atomic update */ |
| OUTPLLP(PPLL_CNTL, 0, |
| ~(PPLL_RESET | PPLL_SLEEP | PPLL_ATOMIC_UPDATE_EN | PPLL_VGA_ATOMIC_UPDATE_EN)); |
| |
| /* We may want some locking ... oh well */ |
| radeon_msleep(5); |
| |
| /* Switch back VCLK source to PPLL */ |
| OUTPLLP(VCLK_ECP_CNTL, VCLK_SRC_SEL_PPLLCLK, ~VCLK_SRC_SEL_MASK); |
| } |
| |
| /* |
| * Timer function for delayed LVDS panel power up/down |
| */ |
| static void radeon_lvds_timer_func(unsigned long data) |
| { |
| struct radeonfb_info *rinfo = (struct radeonfb_info *)data; |
| |
| radeon_engine_idle(); |
| |
| OUTREG(LVDS_GEN_CNTL, rinfo->pending_lvds_gen_cntl); |
| } |
| |
| /* |
| * Apply a video mode. This will apply the whole register set, including |
| * the PLL registers, to the card |
| */ |
| void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode, |
| int regs_only) |
| { |
| int i; |
| int primary_mon = PRIMARY_MONITOR(rinfo); |
| |
| if (nomodeset) |
| return; |
| |
| if (!regs_only) |
| radeon_screen_blank(rinfo, FB_BLANK_NORMAL, 0); |
| |
| radeon_fifo_wait(31); |
| for (i=0; i<10; i++) |
| OUTREG(common_regs[i].reg, common_regs[i].val); |
| |
| /* Apply surface registers */ |
| for (i=0; i<8; i++) { |
| OUTREG(SURFACE0_LOWER_BOUND + 0x10*i, mode->surf_lower_bound[i]); |
| OUTREG(SURFACE0_UPPER_BOUND + 0x10*i, mode->surf_upper_bound[i]); |
| OUTREG(SURFACE0_INFO + 0x10*i, mode->surf_info[i]); |
| } |
| |
| OUTREG(CRTC_GEN_CNTL, mode->crtc_gen_cntl); |
| OUTREGP(CRTC_EXT_CNTL, mode->crtc_ext_cntl, |
| ~(CRTC_HSYNC_DIS | CRTC_VSYNC_DIS | CRTC_DISPLAY_DIS)); |
| OUTREG(CRTC_MORE_CNTL, mode->crtc_more_cntl); |
| OUTREGP(DAC_CNTL, mode->dac_cntl, DAC_RANGE_CNTL | DAC_BLANKING); |
| OUTREG(CRTC_H_TOTAL_DISP, mode->crtc_h_total_disp); |
| OUTREG(CRTC_H_SYNC_STRT_WID, mode->crtc_h_sync_strt_wid); |
| OUTREG(CRTC_V_TOTAL_DISP, mode->crtc_v_total_disp); |
| OUTREG(CRTC_V_SYNC_STRT_WID, mode->crtc_v_sync_strt_wid); |
| OUTREG(CRTC_OFFSET, 0); |
| OUTREG(CRTC_OFFSET_CNTL, 0); |
| OUTREG(CRTC_PITCH, mode->crtc_pitch); |
| OUTREG(SURFACE_CNTL, mode->surface_cntl); |
| |
| radeon_write_pll_regs(rinfo, mode); |
| |
| if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) { |
| radeon_fifo_wait(10); |
| OUTREG(FP_CRTC_H_TOTAL_DISP, mode->fp_crtc_h_total_disp); |
| OUTREG(FP_CRTC_V_TOTAL_DISP, mode->fp_crtc_v_total_disp); |
| OUTREG(FP_H_SYNC_STRT_WID, mode->fp_h_sync_strt_wid); |
| OUTREG(FP_V_SYNC_STRT_WID, mode->fp_v_sync_strt_wid); |
| OUTREG(FP_HORZ_STRETCH, mode->fp_horz_stretch); |
| OUTREG(FP_VERT_STRETCH, mode->fp_vert_stretch); |
| OUTREG(FP_GEN_CNTL, mode->fp_gen_cntl); |
| OUTREG(TMDS_CRC, mode->tmds_crc); |
| OUTREG(TMDS_TRANSMITTER_CNTL, mode->tmds_transmitter_cntl); |
| } |
| |
| if (!regs_only) |
| radeon_screen_blank(rinfo, FB_BLANK_UNBLANK, 0); |
| |
| radeon_fifo_wait(2); |
| OUTPLL(VCLK_ECP_CNTL, mode->vclk_ecp_cntl); |
| |
| return; |
| } |
| |
| /* |
| * Calculate the PLL values for a given mode |
| */ |
| static void radeon_calc_pll_regs(struct radeonfb_info *rinfo, struct radeon_regs *regs, |
| unsigned long freq) |
| { |
| const struct { |
| int divider; |
| int bitvalue; |
| } *post_div, |
| post_divs[] = { |
| { 1, 0 }, |
| { 2, 1 }, |
| { 4, 2 }, |
| { 8, 3 }, |
| { 3, 4 }, |
| { 16, 5 }, |
| { 6, 6 }, |
| { 12, 7 }, |
| { 0, 0 }, |
| }; |
| int fb_div, pll_output_freq = 0; |
| int uses_dvo = 0; |
| |
| /* Check if the DVO port is enabled and sourced from the primary CRTC. I'm |
| * not sure which model starts having FP2_GEN_CNTL, I assume anything more |
| * recent than an r(v)100... |
| */ |
| #if 1 |
| /* XXX I had reports of flicker happening with the cinema display |
| * on TMDS1 that seem to be fixed if I also forbit odd dividers in |
| * this case. This could just be a bandwidth calculation issue, I |
| * haven't implemented the bandwidth code yet, but in the meantime, |
| * forcing uses_dvo to 1 fixes it and shouln't have bad side effects, |
| * I haven't seen a case were were absolutely needed an odd PLL |
| * divider. I'll find a better fix once I have more infos on the |
| * real cause of the problem. |
| */ |
| while (rinfo->has_CRTC2) { |
| u32 fp2_gen_cntl = INREG(FP2_GEN_CNTL); |
| u32 disp_output_cntl; |
| int source; |
| |
| /* FP2 path not enabled */ |
| if ((fp2_gen_cntl & FP2_ON) == 0) |
| break; |
| /* Not all chip revs have the same format for this register, |
| * extract the source selection |
| */ |
| if (rinfo->family == CHIP_FAMILY_R200 || IS_R300_VARIANT(rinfo)) { |
| source = (fp2_gen_cntl >> 10) & 0x3; |
| /* sourced from transform unit, check for transform unit |
| * own source |
| */ |
| if (source == 3) { |
| disp_output_cntl = INREG(DISP_OUTPUT_CNTL); |
| source = (disp_output_cntl >> 12) & 0x3; |
| } |
| } else |
| source = (fp2_gen_cntl >> 13) & 0x1; |
| /* sourced from CRTC2 -> exit */ |
| if (source == 1) |
| break; |
| |
| /* so we end up on CRTC1, let's set uses_dvo to 1 now */ |
| uses_dvo = 1; |
| break; |
| } |
| #else |
| uses_dvo = 1; |
| #endif |
| if (freq > rinfo->pll.ppll_max) |
| freq = rinfo->pll.ppll_max; |
| if (freq*12 < rinfo->pll.ppll_min) |
| freq = rinfo->pll.ppll_min / 12; |
| pr_debug("freq = %lu, PLL min = %u, PLL max = %u\n", |
| freq, rinfo->pll.ppll_min, rinfo->pll.ppll_max); |
| |
| for (post_div = &post_divs[0]; post_div->divider; ++post_div) { |
| pll_output_freq = post_div->divider * freq; |
| /* If we output to the DVO port (external TMDS), we don't allow an |
| * odd PLL divider as those aren't supported on this path |
| */ |
| if (uses_dvo && (post_div->divider & 1)) |
| continue; |
| if (pll_output_freq >= rinfo->pll.ppll_min && |
| pll_output_freq <= rinfo->pll.ppll_max) |
| break; |
| } |
| |
| /* If we fall through the bottom, try the "default value" |
| given by the terminal post_div->bitvalue */ |
| if ( !post_div->divider ) { |
| post_div = &post_divs[post_div->bitvalue]; |
| pll_output_freq = post_div->divider * freq; |
| } |
| pr_debug("ref_div = %d, ref_clk = %d, output_freq = %d\n", |
| rinfo->pll.ref_div, rinfo->pll.ref_clk, |
| pll_output_freq); |
| |
| /* If we fall through the bottom, try the "default value" |
| given by the terminal post_div->bitvalue */ |
| if ( !post_div->divider ) { |
| post_div = &post_divs[post_div->bitvalue]; |
| pll_output_freq = post_div->divider * freq; |
| } |
| pr_debug("ref_div = %d, ref_clk = %d, output_freq = %d\n", |
| rinfo->pll.ref_div, rinfo->pll.ref_clk, |
| pll_output_freq); |
| |
| fb_div = round_div(rinfo->pll.ref_div*pll_output_freq, |
| rinfo->pll.ref_clk); |
| regs->ppll_ref_div = rinfo->pll.ref_div; |
| regs->ppll_div_3 = fb_div | (post_div->bitvalue << 16); |
| |
| pr_debug("post div = 0x%x\n", post_div->bitvalue); |
| pr_debug("fb_div = 0x%x\n", fb_div); |
| pr_debug("ppll_div_3 = 0x%x\n", regs->ppll_div_3); |
| } |
| |
| static int radeonfb_set_par(struct fb_info *info) |
| { |
| struct radeonfb_info *rinfo = info->par; |
| struct fb_var_screeninfo *mode = &info->var; |
| struct radeon_regs *newmode; |
| int hTotal, vTotal, hSyncStart, hSyncEnd, |
| hSyncPol, vSyncStart, vSyncEnd, vSyncPol, cSync; |
| u8 hsync_adj_tab[] = {0, 0x12, 9, 9, 6, 5}; |
| u8 hsync_fudge_fp[] = {2, 2, 0, 0, 5, 5}; |
| u32 sync, h_sync_pol, v_sync_pol, dotClock, pixClock; |
| int i, freq; |
| int format = 0; |
| int nopllcalc = 0; |
| int hsync_start, hsync_fudge, bytpp, hsync_wid, vsync_wid; |
| int primary_mon = PRIMARY_MONITOR(rinfo); |
| int depth = var_to_depth(mode); |
| int use_rmx = 0; |
| |
| newmode = kmalloc(sizeof(struct radeon_regs), GFP_KERNEL); |
| if (!newmode) |
| return -ENOMEM; |
| |
| /* We always want engine to be idle on a mode switch, even |
| * if we won't actually change the mode |
| */ |
| radeon_engine_idle(); |
| |
| hSyncStart = mode->xres + mode->right_margin; |
| hSyncEnd = hSyncStart + mode->hsync_len; |
| hTotal = hSyncEnd + mode->left_margin; |
| |
| vSyncStart = mode->yres + mode->lower_margin; |
| vSyncEnd = vSyncStart + mode->vsync_len; |
| vTotal = vSyncEnd + mode->upper_margin; |
| pixClock = mode->pixclock; |
| |
| sync = mode->sync; |
| h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1; |
| v_sync_pol = sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1; |
| |
| if (primary_mon == MT_DFP || primary_mon == MT_LCD) { |
| if (rinfo->panel_info.xres < mode->xres) |
| mode->xres = rinfo->panel_info.xres; |
| if (rinfo->panel_info.yres < mode->yres) |
| mode->yres = rinfo->panel_info.yres; |
| |
| hTotal = mode->xres + rinfo->panel_info.hblank; |
| hSyncStart = mode->xres + rinfo->panel_info.hOver_plus; |
| hSyncEnd = hSyncStart + rinfo->panel_info.hSync_width; |
| |
| vTotal = mode->yres + rinfo->panel_info.vblank; |
| vSyncStart = mode->yres + rinfo->panel_info.vOver_plus; |
| vSyncEnd = vSyncStart + rinfo->panel_info.vSync_width; |
| |
| h_sync_pol = !rinfo->panel_info.hAct_high; |
| v_sync_pol = !rinfo->panel_info.vAct_high; |
| |
| pixClock = 100000000 / rinfo->panel_info.clock; |
| |
| if (rinfo->panel_info.use_bios_dividers) { |
| nopllcalc = 1; |
| newmode->ppll_div_3 = rinfo->panel_info.fbk_divider | |
| (rinfo->panel_info.post_divider << 16); |
| newmode->ppll_ref_div = rinfo->panel_info.ref_divider; |
| } |
| } |
| dotClock = 1000000000 / pixClock; |
| freq = dotClock / 10; /* x100 */ |
| |
| pr_debug("hStart = %d, hEnd = %d, hTotal = %d\n", |
| hSyncStart, hSyncEnd, hTotal); |
| pr_debug("vStart = %d, vEnd = %d, vTotal = %d\n", |
| vSyncStart, vSyncEnd, vTotal); |
| |
| hsync_wid = (hSyncEnd - hSyncStart) / 8; |
| vsync_wid = vSyncEnd - vSyncStart; |
| if (hsync_wid == 0) |
| hsync_wid = 1; |
| else if (hsync_wid > 0x3f) /* max */ |
| hsync_wid = 0x3f; |
| |
| if (vsync_wid == 0) |
| vsync_wid = 1; |
| else if (vsync_wid > 0x1f) /* max */ |
| vsync_wid = 0x1f; |
| |
| hSyncPol = mode->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1; |
| vSyncPol = mode->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1; |
| |
| cSync = mode->sync & FB_SYNC_COMP_HIGH_ACT ? (1 << 4) : 0; |
| |
| format = radeon_get_dstbpp(depth); |
| bytpp = mode->bits_per_pixel >> 3; |
| |
| if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) |
| hsync_fudge = hsync_fudge_fp[format-1]; |
| else |
| hsync_fudge = hsync_adj_tab[format-1]; |
| |
| hsync_start = hSyncStart - 8 + hsync_fudge; |
| |
| newmode->crtc_gen_cntl = CRTC_EXT_DISP_EN | CRTC_EN | |
| (format << 8); |
| |
| /* Clear auto-center etc... */ |
| newmode->crtc_more_cntl = rinfo->init_state.crtc_more_cntl; |
| newmode->crtc_more_cntl &= 0xfffffff0; |
| |
| if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) { |
| newmode->crtc_ext_cntl = VGA_ATI_LINEAR | XCRT_CNT_EN; |
| if (mirror) |
| newmode->crtc_ext_cntl |= CRTC_CRT_ON; |
| |
| newmode->crtc_gen_cntl &= ~(CRTC_DBL_SCAN_EN | |
| CRTC_INTERLACE_EN); |
| } else { |
| newmode->crtc_ext_cntl = VGA_ATI_LINEAR | XCRT_CNT_EN | |
| CRTC_CRT_ON; |
| } |
| |
| newmode->dac_cntl = /* INREG(DAC_CNTL) | */ DAC_MASK_ALL | DAC_VGA_ADR_EN | |
| DAC_8BIT_EN; |
| |
| newmode->crtc_h_total_disp = ((((hTotal / 8) - 1) & 0x3ff) | |
| (((mode->xres / 8) - 1) << 16)); |
| |
| newmode->crtc_h_sync_strt_wid = ((hsync_start & 0x1fff) | |
| (hsync_wid << 16) | (h_sync_pol << 23)); |
| |
| newmode->crtc_v_total_disp = ((vTotal - 1) & 0xffff) | |
| ((mode->yres - 1) << 16); |
| |
| newmode->crtc_v_sync_strt_wid = (((vSyncStart - 1) & 0xfff) | |
| (vsync_wid << 16) | (v_sync_pol << 23)); |
| |
| if (!(info->flags & FBINFO_HWACCEL_DISABLED)) { |
| /* We first calculate the engine pitch */ |
| rinfo->pitch = ((mode->xres_virtual * ((mode->bits_per_pixel + 1) / 8) + 0x3f) |
| & ~(0x3f)) >> 6; |
| |
| /* Then, re-multiply it to get the CRTC pitch */ |
| newmode->crtc_pitch = (rinfo->pitch << 3) / ((mode->bits_per_pixel + 1) / 8); |
| } else |
| newmode->crtc_pitch = (mode->xres_virtual >> 3); |
| |
| newmode->crtc_pitch |= (newmode->crtc_pitch << 16); |
| |
| /* |
| * It looks like recent chips have a problem with SURFACE_CNTL, |
| * setting SURF_TRANSLATION_DIS completely disables the |
| * swapper as well, so we leave it unset now. |
| */ |
| newmode->surface_cntl = 0; |
| |
| #if defined(__BIG_ENDIAN) |
| |
| /* Setup swapping on both apertures, though we currently |
| * only use aperture 0, enabling swapper on aperture 1 |
| * won't harm |
| */ |
| switch (mode->bits_per_pixel) { |
| case 16: |
| newmode->surface_cntl |= NONSURF_AP0_SWP_16BPP; |
| newmode->surface_cntl |= NONSURF_AP1_SWP_16BPP; |
| break; |
| case 24: |
| case 32: |
| newmode->surface_cntl |= NONSURF_AP0_SWP_32BPP; |
| newmode->surface_cntl |= NONSURF_AP1_SWP_32BPP; |
| break; |
| } |
| #endif |
| |
| /* Clear surface registers */ |
| for (i=0; i<8; i++) { |
| newmode->surf_lower_bound[i] = 0; |
| newmode->surf_upper_bound[i] = 0x1f; |
| newmode->surf_info[i] = 0; |
| } |
| |
| pr_debug("h_total_disp = 0x%x\t hsync_strt_wid = 0x%x\n", |
| newmode->crtc_h_total_disp, newmode->crtc_h_sync_strt_wid); |
| pr_debug("v_total_disp = 0x%x\t vsync_strt_wid = 0x%x\n", |
| newmode->crtc_v_total_disp, newmode->crtc_v_sync_strt_wid); |
| |
| rinfo->bpp = mode->bits_per_pixel; |
| rinfo->depth = depth; |
| |
| pr_debug("pixclock = %lu\n", (unsigned long)pixClock); |
| pr_debug("freq = %lu\n", (unsigned long)freq); |
| |
| /* We use PPLL_DIV_3 */ |
| newmode->clk_cntl_index = 0x300; |
| |
| /* Calculate PPLL value if necessary */ |
| if (!nopllcalc) |
| radeon_calc_pll_regs(rinfo, newmode, freq); |
| |
| newmode->vclk_ecp_cntl = rinfo->init_state.vclk_ecp_cntl; |
| |
| if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) { |
| unsigned int hRatio, vRatio; |
| |
| if (mode->xres > rinfo->panel_info.xres) |
| mode->xres = rinfo->panel_info.xres; |
| if (mode->yres > rinfo->panel_info.yres) |
| mode->yres = rinfo->panel_info.yres; |
| |
| newmode->fp_horz_stretch = (((rinfo->panel_info.xres / 8) - 1) |
| << HORZ_PANEL_SHIFT); |
| newmode->fp_vert_stretch = ((rinfo->panel_info.yres - 1) |
| << VERT_PANEL_SHIFT); |
| |
| if (mode->xres != rinfo->panel_info.xres) { |
| hRatio = round_div(mode->xres * HORZ_STRETCH_RATIO_MAX, |
| rinfo->panel_info.xres); |
| newmode->fp_horz_stretch = (((((unsigned long)hRatio) & HORZ_STRETCH_RATIO_MASK)) | |
| (newmode->fp_horz_stretch & |
| (HORZ_PANEL_SIZE | HORZ_FP_LOOP_STRETCH | |
| HORZ_AUTO_RATIO_INC))); |
| newmode->fp_horz_stretch |= (HORZ_STRETCH_BLEND | |
| HORZ_STRETCH_ENABLE); |
| use_rmx = 1; |
| } |
| newmode->fp_horz_stretch &= ~HORZ_AUTO_RATIO; |
| |
| if (mode->yres != rinfo->panel_info.yres) { |
| vRatio = round_div(mode->yres * VERT_STRETCH_RATIO_MAX, |
| rinfo->panel_info.yres); |
| newmode->fp_vert_stretch = (((((unsigned long)vRatio) & VERT_STRETCH_RATIO_MASK)) | |
| (newmode->fp_vert_stretch & |
| (VERT_PANEL_SIZE | VERT_STRETCH_RESERVED))); |
| newmode->fp_vert_stretch |= (VERT_STRETCH_BLEND | |
| VERT_STRETCH_ENABLE); |
| use_rmx = 1; |
| } |
| newmode->fp_vert_stretch &= ~VERT_AUTO_RATIO_EN; |
| |
| newmode->fp_gen_cntl = (rinfo->init_state.fp_gen_cntl & (u32) |
| ~(FP_SEL_CRTC2 | |
| FP_RMX_HVSYNC_CONTROL_EN | |
| FP_DFP_SYNC_SEL | |
| FP_CRT_SYNC_SEL | |
| FP_CRTC_LOCK_8DOT | |
| FP_USE_SHADOW_EN | |
| FP_CRTC_USE_SHADOW_VEND | |
| FP_CRT_SYNC_ALT)); |
| |
| newmode->fp_gen_cntl |= (FP_CRTC_DONT_SHADOW_VPAR | |
| FP_CRTC_DONT_SHADOW_HEND | |
| FP_PANEL_FORMAT); |
| |
| if (IS_R300_VARIANT(rinfo) || |
| (rinfo->family == CHIP_FAMILY_R200)) { |
| newmode->fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK; |
| if (use_rmx) |
| newmode->fp_gen_cntl |= R200_FP_SOURCE_SEL_RMX; |
| else |
| newmode->fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1; |
| } else |
| newmode->fp_gen_cntl |= FP_SEL_CRTC1; |
| |
| newmode->lvds_gen_cntl = rinfo->init_state.lvds_gen_cntl; |
| newmode->lvds_pll_cntl = rinfo->init_state.lvds_pll_cntl; |
| newmode->tmds_crc = rinfo->init_state.tmds_crc; |
| newmode->tmds_transmitter_cntl = rinfo->init_state.tmds_transmitter_cntl; |
| |
| if (primary_mon == MT_LCD) { |
| newmode->lvds_gen_cntl |= (LVDS_ON | LVDS_BLON); |
| newmode->fp_gen_cntl &= ~(FP_FPON | FP_TMDS_EN); |
| } else { |
| /* DFP */ |
| newmode->fp_gen_cntl |= (FP_FPON | FP_TMDS_EN); |
| newmode->tmds_transmitter_cntl &= ~(TMDS_PLLRST); |
| /* TMDS_PLL_EN bit is reversed on RV (and mobility) chips */ |
| if (IS_R300_VARIANT(rinfo) || |
| (rinfo->family == CHIP_FAMILY_R200) || !rinfo->has_CRTC2) |
| newmode->tmds_transmitter_cntl &= ~TMDS_PLL_EN; |
| else |
| newmode->tmds_transmitter_cntl |= TMDS_PLL_EN; |
| newmode->crtc_ext_cntl &= ~CRTC_CRT_ON; |
| } |
| |
| newmode->fp_crtc_h_total_disp = (((rinfo->panel_info.hblank / 8) & 0x3ff) | |
| (((mode->xres / 8) - 1) << 16)); |
| newmode->fp_crtc_v_total_disp = (rinfo->panel_info.vblank & 0xffff) | |
| ((mode->yres - 1) << 16); |
| newmode->fp_h_sync_strt_wid = ((rinfo->panel_info.hOver_plus & 0x1fff) | |
| (hsync_wid << 16) | (h_sync_pol << 23)); |
| newmode->fp_v_sync_strt_wid = ((rinfo->panel_info.vOver_plus & 0xfff) | |
| (vsync_wid << 16) | (v_sync_pol << 23)); |
| } |
| |
| /* do it! */ |
| if (!rinfo->asleep) { |
| memcpy(&rinfo->state, newmode, sizeof(*newmode)); |
| radeon_write_mode (rinfo, newmode, 0); |
| /* (re)initialize the engine */ |
| if (!(info->flags & FBINFO_HWACCEL_DISABLED)) |
| radeonfb_engine_init (rinfo); |
| } |
| /* Update fix */ |
| if (!(info->flags & FBINFO_HWACCEL_DISABLED)) |
| info->fix.line_length = rinfo->pitch*64; |
| else |
| info->fix.line_length = mode->xres_virtual |
| * ((mode->bits_per_pixel + 1) / 8); |
| info->fix.visual = rinfo->depth == 8 ? FB_VISUAL_PSEUDOCOLOR |
| : FB_VISUAL_DIRECTCOLOR; |
| |
| #ifdef CONFIG_BOOTX_TEXT |
| /* Update debug text engine */ |
| btext_update_display(rinfo->fb_base_phys, mode->xres, mode->yres, |
| rinfo->depth, info->fix.line_length); |
| #endif |
| |
| kfree(newmode); |
| return 0; |
| } |
| |
| |
| static struct fb_ops radeonfb_ops = { |
| .owner = THIS_MODULE, |
| .fb_check_var = radeonfb_check_var, |
| .fb_set_par = radeonfb_set_par, |
| .fb_setcolreg = radeonfb_setcolreg, |
| .fb_setcmap = radeonfb_setcmap, |
| .fb_pan_display = radeonfb_pan_display, |
| .fb_blank = radeonfb_blank, |
| .fb_ioctl = radeonfb_ioctl, |
| .fb_sync = radeonfb_sync, |
| .fb_fillrect = radeonfb_fillrect, |
| .fb_copyarea = radeonfb_copyarea, |
| .fb_imageblit = radeonfb_imageblit, |
| }; |
| |
| |
| static int radeon_set_fbinfo(struct radeonfb_info *rinfo) |
| { |
| struct fb_info *info = rinfo->info; |
| |
| info->par = rinfo; |
| info->pseudo_palette = rinfo->pseudo_palette; |
| info->flags = FBINFO_DEFAULT |
| | FBINFO_HWACCEL_COPYAREA |
| | FBINFO_HWACCEL_FILLRECT |
| | FBINFO_HWACCEL_XPAN |
| | FBINFO_HWACCEL_YPAN; |
| info->fbops = &radeonfb_ops; |
| info->screen_base = rinfo->fb_base; |
| info->screen_size = rinfo->mapped_vram; |
| /* Fill fix common fields */ |
| strlcpy(info->fix.id, rinfo->name, sizeof(info->fix.id)); |
| info->fix.smem_start = rinfo->fb_base_phys; |
| info->fix.smem_len = rinfo->video_ram; |
| info->fix.type = FB_TYPE_PACKED_PIXELS; |
| info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| info->fix.xpanstep = 8; |
| info->fix.ypanstep = 1; |
| info->fix.ywrapstep = 0; |
| info->fix.type_aux = 0; |
| info->fix.mmio_start = rinfo->mmio_base_phys; |
| info->fix.mmio_len = RADEON_REGSIZE; |
| info->fix.accel = FB_ACCEL_ATI_RADEON; |
| |
| fb_alloc_cmap(&info->cmap, 256, 0); |
| |
| if (noaccel) |
| info->flags |= FBINFO_HWACCEL_DISABLED; |
| |
| return 0; |
| } |
| |
| /* |
| * This reconfigure the card's internal memory map. In theory, we'd like |
| * to setup the card's memory at the same address as it's PCI bus address, |
| * and the AGP aperture right after that so that system RAM on 32 bits |
| * machines at least, is directly accessible. However, doing so would |
| * conflict with the current XFree drivers... |
| * Ultimately, I hope XFree, GATOS and ATI binary drivers will all agree |
| * on the proper way to set this up and duplicate this here. In the meantime, |
| * I put the card's memory at 0 in card space and AGP at some random high |
| * local (0xe0000000 for now) that will be changed by XFree/DRI anyway |
| */ |
| #ifdef CONFIG_PPC |
| #undef SET_MC_FB_FROM_APERTURE |
| static void fixup_memory_mappings(struct radeonfb_info *rinfo) |
| { |
| u32 save_crtc_gen_cntl, save_crtc2_gen_cntl = 0; |
| u32 save_crtc_ext_cntl; |
| u32 aper_base, aper_size; |
| u32 agp_base; |
| |
| /* First, we disable display to avoid interfering */ |
| if (rinfo->has_CRTC2) { |
| save_crtc2_gen_cntl = INREG(CRTC2_GEN_CNTL); |
| OUTREG(CRTC2_GEN_CNTL, save_crtc2_gen_cntl | CRTC2_DISP_REQ_EN_B); |
| } |
| save_crtc_gen_cntl = INREG(CRTC_GEN_CNTL); |
| save_crtc_ext_cntl = INREG(CRTC_EXT_CNTL); |
| |
| OUTREG(CRTC_EXT_CNTL, save_crtc_ext_cntl | CRTC_DISPLAY_DIS); |
| OUTREG(CRTC_GEN_CNTL, save_crtc_gen_cntl | CRTC_DISP_REQ_EN_B); |
| mdelay(100); |
| |
| aper_base = INREG(CNFG_APER_0_BASE); |
| aper_size = INREG(CNFG_APER_SIZE); |
| |
| #ifdef SET_MC_FB_FROM_APERTURE |
| /* Set framebuffer to be at the same address as set in PCI BAR */ |
| OUTREG(MC_FB_LOCATION, |
| ((aper_base + aper_size - 1) & 0xffff0000) | (aper_base >> 16)); |
| rinfo->fb_local_base = aper_base; |
| #else |
| OUTREG(MC_FB_LOCATION, 0x7fff0000); |
| rinfo->fb_local_base = 0; |
| #endif |
| agp_base = aper_base + aper_size; |
| if (agp_base & 0xf0000000) |
| agp_base = (aper_base | 0x0fffffff) + 1; |
| |
| /* Set AGP to be just after the framebuffer on a 256Mb boundary. This |
| * assumes the FB isn't mapped to 0xf0000000 or above, but this is |
| * always the case on PPCs afaik. |
| */ |
| #ifdef SET_MC_FB_FROM_APERTURE |
| OUTREG(MC_AGP_LOCATION, 0xffff0000 | (agp_base >> 16)); |
| #else |
| OUTREG(MC_AGP_LOCATION, 0xffffe000); |
| #endif |
| |
| /* Fixup the display base addresses & engine offsets while we |
| * are at it as well |
| */ |
| #ifdef SET_MC_FB_FROM_APERTURE |
| OUTREG(DISPLAY_BASE_ADDR, aper_base); |
| if (rinfo->has_CRTC2) |
| OUTREG(CRTC2_DISPLAY_BASE_ADDR, aper_base); |
| OUTREG(OV0_BASE_ADDR, aper_base); |
| #else |
| OUTREG(DISPLAY_BASE_ADDR, 0); |
| if (rinfo->has_CRTC2) |
| OUTREG(CRTC2_DISPLAY_BASE_ADDR, 0); |
| OUTREG(OV0_BASE_ADDR, 0); |
| #endif |
| mdelay(100); |
| |
| /* Restore display settings */ |
| OUTREG(CRTC_GEN_CNTL, save_crtc_gen_cntl); |
| OUTREG(CRTC_EXT_CNTL, save_crtc_ext_cntl); |
| if (rinfo->has_CRTC2) |
| OUTREG(CRTC2_GEN_CNTL, save_crtc2_gen_cntl); |
| |
| pr_debug("aper_base: %08x MC_FB_LOC to: %08x, MC_AGP_LOC to: %08x\n", |
| aper_base, |
| ((aper_base + aper_size - 1) & 0xffff0000) | (aper_base >> 16), |
| 0xffff0000 | (agp_base >> 16)); |
| } |
| #endif /* CONFIG_PPC */ |
| |
| |
| static void radeon_identify_vram(struct radeonfb_info *rinfo) |
| { |
| u32 tmp; |
| |
| /* framebuffer size */ |
| if ((rinfo->family == CHIP_FAMILY_RS100) || |
| (rinfo->family == CHIP_FAMILY_RS200) || |
| (rinfo->family == CHIP_FAMILY_RS300) || |
| (rinfo->family == CHIP_FAMILY_RC410) || |
| (rinfo->family == CHIP_FAMILY_RS400) || |
| (rinfo->family == CHIP_FAMILY_RS480) ) { |
| u32 tom = INREG(NB_TOM); |
| tmp = ((((tom >> 16) - (tom & 0xffff) + 1) << 6) * 1024); |
| |
| radeon_fifo_wait(6); |
| OUTREG(MC_FB_LOCATION, tom); |
| OUTREG(DISPLAY_BASE_ADDR, (tom & 0xffff) << 16); |
| OUTREG(CRTC2_DISPLAY_BASE_ADDR, (tom & 0xffff) << 16); |
| OUTREG(OV0_BASE_ADDR, (tom & 0xffff) << 16); |
| |
| /* This is supposed to fix the crtc2 noise problem. */ |
| OUTREG(GRPH2_BUFFER_CNTL, INREG(GRPH2_BUFFER_CNTL) & ~0x7f0000); |
| |
| if ((rinfo->family == CHIP_FAMILY_RS100) || |
| (rinfo->family == CHIP_FAMILY_RS200)) { |
| /* This is to workaround the asic bug for RMX, some versions |
| of BIOS doesn't have this register initialized correctly. |
| */ |
| OUTREGP(CRTC_MORE_CNTL, CRTC_H_CUTOFF_ACTIVE_EN, |
| ~CRTC_H_CUTOFF_ACTIVE_EN); |
| } |
| } else { |
| tmp = INREG(CNFG_MEMSIZE); |
| } |
| |
| /* mem size is bits [28:0], mask off the rest */ |
| rinfo->video_ram = tmp & CNFG_MEMSIZE_MASK; |
| |
| /* |
| * Hack to get around some busted production M6's |
| * reporting no ram |
| */ |
| if (rinfo->video_ram == 0) { |
| switch (rinfo->pdev->device) { |
| case PCI_CHIP_RADEON_LY: |
| case PCI_CHIP_RADEON_LZ: |
| rinfo->video_ram = 8192 * 1024; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| |
| /* |
| * Now try to identify VRAM type |
| */ |
| if (rinfo->is_IGP || (rinfo->family >= CHIP_FAMILY_R300) || |
| (INREG(MEM_SDRAM_MODE_REG) & (1<<30))) |
| rinfo->vram_ddr = 1; |
| else |
| rinfo->vram_ddr = 0; |
| |
| tmp = INREG(MEM_CNTL); |
| if (IS_R300_VARIANT(rinfo)) { |
| tmp &= R300_MEM_NUM_CHANNELS_MASK; |
| switch (tmp) { |
| case 0: rinfo->vram_width = 64; break; |
| case 1: rinfo->vram_width = 128; break; |
| case 2: rinfo->vram_width = 256; break; |
| default: rinfo->vram_width = 128; break; |
| } |
| } else if ((rinfo->family == CHIP_FAMILY_RV100) || |
| (rinfo->family == CHIP_FAMILY_RS100) || |
| (rinfo->family == CHIP_FAMILY_RS200)){ |
| if (tmp & RV100_MEM_HALF_MODE) |
| rinfo->vram_width = 32; |
| else |
| rinfo->vram_width = 64; |
| } else { |
| if (tmp & MEM_NUM_CHANNELS_MASK) |
| rinfo->vram_width = 128; |
| else |
| rinfo->vram_width = 64; |
| } |
| |
| /* This may not be correct, as some cards can have half of channel disabled |
| * ToDo: identify these cases |
| */ |
| |
| pr_debug("radeonfb (%s): Found %ldk of %s %d bits wide videoram\n", |
| pci_name(rinfo->pdev), |
| rinfo->video_ram / 1024, |
| rinfo->vram_ddr ? "DDR" : "SDRAM", |
| rinfo->vram_width); |
| } |
| |
| /* |
| * Sysfs |
| */ |
| |
| static ssize_t radeon_show_one_edid(char *buf, loff_t off, size_t count, const u8 *edid) |
| { |
| return memory_read_from_buffer(buf, count, &off, edid, EDID_LENGTH); |
| } |
| |
| |
| static ssize_t radeon_show_edid1(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct fb_info *info = pci_get_drvdata(pdev); |
| struct radeonfb_info *rinfo = info->par; |
| |
| return radeon_show_one_edid(buf, off, count, rinfo->mon1_EDID); |
| } |
| |
| |
| static ssize_t radeon_show_edid2(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *bin_attr, |
| char *buf, loff_t off, size_t count) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct fb_info *info = pci_get_drvdata(pdev); |
| struct radeonfb_info *rinfo = info->par; |
| |
| return radeon_show_one_edid(buf, off, count, rinfo->mon2_EDID); |
| } |
| |
| static struct bin_attribute edid1_attr = { |
| .attr = { |
| .name = "edid1", |
| .mode = 0444, |
| }, |
| .size = EDID_LENGTH, |
| .read = radeon_show_edid1, |
| }; |
| |
| static struct bin_attribute edid2_attr = { |
| .attr = { |
| .name = "edid2", |
| .mode = 0444, |
| }, |
| .size = EDID_LENGTH, |
| .read = radeon_show_edid2, |
| }; |
| |
| |
| static int radeonfb_pci_register(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| struct fb_info *info; |
| struct radeonfb_info *rinfo; |
| int ret; |
| unsigned char c1, c2; |
| int err = 0; |
| |
| pr_debug("radeonfb_pci_register BEGIN\n"); |
| |
| /* Enable device in PCI config */ |
| ret = pci_enable_device(pdev); |
| if (ret < 0) { |
| printk(KERN_ERR "radeonfb (%s): Cannot enable PCI device\n", |
| pci_name(pdev)); |
| goto err_out; |
| } |
| |
| info = framebuffer_alloc(sizeof(struct radeonfb_info), &pdev->dev); |
| if (!info) { |
| printk (KERN_ERR "radeonfb (%s): could not allocate memory\n", |
| pci_name(pdev)); |
| ret = -ENOMEM; |
| goto err_disable; |
| } |
| rinfo = info->par; |
| rinfo->info = info; |
| rinfo->pdev = pdev; |
| |
| spin_lock_init(&rinfo->reg_lock); |
| init_timer(&rinfo->lvds_timer); |
| rinfo->lvds_timer.function = radeon_lvds_timer_func; |
| rinfo->lvds_timer.data = (unsigned long)rinfo; |
| |
| c1 = ent->device >> 8; |
| c2 = ent->device & 0xff; |
| if (isprint(c1) && isprint(c2)) |
| snprintf(rinfo->name, sizeof(rinfo->name), |
| "ATI Radeon %x \"%c%c\"", ent->device & 0xffff, c1, c2); |
| else |
| snprintf(rinfo->name, sizeof(rinfo->name), |
| "ATI Radeon %x", ent->device & 0xffff); |
| |
| rinfo->family = ent->driver_data & CHIP_FAMILY_MASK; |
| rinfo->chipset = pdev->device; |
| rinfo->has_CRTC2 = (ent->driver_data & CHIP_HAS_CRTC2) != 0; |
| rinfo->is_mobility = (ent->driver_data & CHIP_IS_MOBILITY) != 0; |
| rinfo->is_IGP = (ent->driver_data & CHIP_IS_IGP) != 0; |
| |
| /* Set base addrs */ |
| rinfo->fb_base_phys = pci_resource_start (pdev, 0); |
| rinfo->mmio_base_phys = pci_resource_start (pdev, 2); |
| |
| /* request the mem regions */ |
| ret = pci_request_region(pdev, 0, "radeonfb framebuffer"); |
| if (ret < 0) { |
| printk( KERN_ERR "radeonfb (%s): cannot request region 0.\n", |
| pci_name(rinfo->pdev)); |
| goto err_release_fb; |
| } |
| |
| ret = pci_request_region(pdev, 2, "radeonfb mmio"); |
| if (ret < 0) { |
| printk( KERN_ERR "radeonfb (%s): cannot request region 2.\n", |
| pci_name(rinfo->pdev)); |
| goto err_release_pci0; |
| } |
| |
| /* map the regions */ |
| rinfo->mmio_base = ioremap(rinfo->mmio_base_phys, RADEON_REGSIZE); |
| if (!rinfo->mmio_base) { |
| printk(KERN_ERR "radeonfb (%s): cannot map MMIO\n", |
| pci_name(rinfo->pdev)); |
| ret = -EIO; |
| goto err_release_pci2; |
| } |
| |
| rinfo->fb_local_base = INREG(MC_FB_LOCATION) << 16; |
| |
| /* |
| * Check for errata |
| */ |
| rinfo->errata = 0; |
| if (rinfo->family == CHIP_FAMILY_R300 && |
| (INREG(CNFG_CNTL) & CFG_ATI_REV_ID_MASK) |
| == CFG_ATI_REV_A11) |
| rinfo->errata |= CHIP_ERRATA_R300_CG; |
| |
| if (rinfo->family == CHIP_FAMILY_RV200 || |
| rinfo->family == CHIP_FAMILY_RS200) |
| rinfo->errata |= CHIP_ERRATA_PLL_DUMMYREADS; |
| |
| if (rinfo->family == CHIP_FAMILY_RV100 || |
| rinfo->family == CHIP_FAMILY_RS100 || |
| rinfo->family == CHIP_FAMILY_RS200) |
| rinfo->errata |= CHIP_ERRATA_PLL_DELAY; |
| |
| #if defined(CONFIG_PPC) || defined(CONFIG_SPARC) |
| /* On PPC, we obtain the OF device-node pointer to the firmware |
| * data for this chip |
| */ |
| rinfo->of_node = pci_device_to_OF_node(pdev); |
| if (rinfo->of_node == NULL) |
| printk(KERN_WARNING "radeonfb (%s): Cannot match card to OF node !\n", |
| pci_name(rinfo->pdev)); |
| |
| #endif /* CONFIG_PPC || CONFIG_SPARC */ |
| #ifdef CONFIG_PPC |
| /* On PPC, the firmware sets up a memory mapping that tends |
| * to cause lockups when enabling the engine. We reconfigure |
| * the card internal memory mappings properly |
| */ |
| fixup_memory_mappings(rinfo); |
| #endif /* CONFIG_PPC */ |
| |
| /* Get VRAM size and type */ |
| radeon_identify_vram(rinfo); |
| |
| rinfo->mapped_vram = min_t(unsigned long, MAX_MAPPED_VRAM, rinfo->video_ram); |
| |
| do { |
| rinfo->fb_base = ioremap_wc(rinfo->fb_base_phys, |
| rinfo->mapped_vram); |
| } while (rinfo->fb_base == NULL && |
| ((rinfo->mapped_vram /= 2) >= MIN_MAPPED_VRAM)); |
| |
| if (rinfo->fb_base == NULL) { |
| printk (KERN_ERR "radeonfb (%s): cannot map FB\n", |
| pci_name(rinfo->pdev)); |
| ret = -EIO; |
| goto err_unmap_rom; |
| } |
| |
| pr_debug("radeonfb (%s): mapped %ldk videoram\n", pci_name(rinfo->pdev), |
| rinfo->mapped_vram/1024); |
| |
| /* |
| * Map the BIOS ROM if any and retrieve PLL parameters from |
| * the BIOS. We skip that on mobility chips as the real panel |
| * values we need aren't in the ROM but in the BIOS image in |
| * memory. This is definitely not the best meacnism though, |
| * we really need the arch code to tell us which is the "primary" |
| * video adapter to use the memory image (or better, the arch |
| * should provide us a copy of the BIOS image to shield us from |
| * archs who would store that elsewhere and/or could initialize |
| * more than one adapter during boot). |
| */ |
| if (!rinfo->is_mobility) |
| radeon_map_ROM(rinfo, pdev); |
| |
| /* |
| * On x86, the primary display on laptop may have it's BIOS |
| * ROM elsewhere, try to locate it at the legacy memory hole. |
| * We probably need to make sure this is the primary display, |
| * but that is difficult without some arch support. |
| */ |
| #ifdef CONFIG_X86 |
| if (rinfo->bios_seg == NULL) |
| radeon_find_mem_vbios(rinfo); |
| #endif |
| |
| /* If both above failed, try the BIOS ROM again for mobility |
| * chips |
| */ |
| if (rinfo->bios_seg == NULL && rinfo->is_mobility) |
| radeon_map_ROM(rinfo, pdev); |
| |
| /* Get informations about the board's PLL */ |
| radeon_get_pllinfo(rinfo); |
| |
| #ifdef CONFIG_FB_RADEON_I2C |
| /* Register I2C bus */ |
| radeon_create_i2c_busses(rinfo); |
| #endif |
| |
| /* set all the vital stuff */ |
| radeon_set_fbinfo (rinfo); |
| |
| /* Probe screen types */ |
| radeon_probe_screens(rinfo, monitor_layout, ignore_edid); |
| |
| /* Build mode list, check out panel native model */ |
| radeon_check_modes(rinfo, mode_option); |
| |
| /* Register some sysfs stuff (should be done better) */ |
| if (rinfo->mon1_EDID) |
| err |= sysfs_create_bin_file(&rinfo->pdev->dev.kobj, |
| &edid1_attr); |
| if (rinfo->mon2_EDID) |
| err |= sysfs_create_bin_file(&rinfo->pdev->dev.kobj, |
| &edid2_attr); |
| if (err) |
| pr_warn("%s() Creating sysfs files failed, continuing\n", |
| __func__); |
| |
| /* save current mode regs before we switch into the new one |
| * so we can restore this upon __exit |
| */ |
| radeon_save_state (rinfo, &rinfo->init_state); |
| memcpy(&rinfo->state, &rinfo->init_state, sizeof(struct radeon_regs)); |
| |
| /* Setup Power Management capabilities */ |
| if (default_dynclk < -1) { |
| /* -2 is special: means ON on mobility chips and do not |
| * change on others |
| */ |
| radeonfb_pm_init(rinfo, rinfo->is_mobility ? 1 : -1, ignore_devlist, force_sleep); |
| } else |
| radeonfb_pm_init(rinfo, default_dynclk, ignore_devlist, force_sleep); |
| |
| pci_set_drvdata(pdev, info); |
| |
| /* Register with fbdev layer */ |
| ret = register_framebuffer(info); |
| if (ret < 0) { |
| printk (KERN_ERR "radeonfb (%s): could not register framebuffer\n", |
| pci_name(rinfo->pdev)); |
| goto err_unmap_fb; |
| } |
| |
| if (!nomtrr) |
| rinfo->wc_cookie = arch_phys_wc_add(rinfo->fb_base_phys, |
| rinfo->video_ram); |
| |
| if (backlight) |
| radeonfb_bl_init(rinfo); |
| |
| printk ("radeonfb (%s): %s\n", pci_name(rinfo->pdev), rinfo->name); |
| |
| if (rinfo->bios_seg) |
| radeon_unmap_ROM(rinfo, pdev); |
| pr_debug("radeonfb_pci_register END\n"); |
| |
| return 0; |
| err_unmap_fb: |
| iounmap(rinfo->fb_base); |
| err_unmap_rom: |
| kfree(rinfo->mon1_EDID); |
| kfree(rinfo->mon2_EDID); |
| if (rinfo->mon1_modedb) |
| fb_destroy_modedb(rinfo->mon1_modedb); |
| fb_dealloc_cmap(&info->cmap); |
| #ifdef CONFIG_FB_RADEON_I2C |
| radeon_delete_i2c_busses(rinfo); |
| #endif |
| if (rinfo->bios_seg) |
| radeon_unmap_ROM(rinfo, pdev); |
| iounmap(rinfo->mmio_base); |
| err_release_pci2: |
| pci_release_region(pdev, 2); |
| err_release_pci0: |
| pci_release_region(pdev, 0); |
| err_release_fb: |
| framebuffer_release(info); |
| err_disable: |
| err_out: |
| return ret; |
| } |
| |
| |
| |
| static void radeonfb_pci_unregister(struct pci_dev *pdev) |
| { |
| struct fb_info *info = pci_get_drvdata(pdev); |
| struct radeonfb_info *rinfo = info->par; |
| |
| if (!rinfo) |
| return; |
| |
| radeonfb_pm_exit(rinfo); |
| |
| if (rinfo->mon1_EDID) |
| sysfs_remove_bin_file(&rinfo->pdev->dev.kobj, &edid1_attr); |
| if (rinfo->mon2_EDID) |
| sysfs_remove_bin_file(&rinfo->pdev->dev.kobj, &edid2_attr); |
| |
| #if 0 |
| /* restore original state |
| * |
| * Doesn't quite work yet, I suspect if we come from a legacy |
| * VGA mode (or worse, text mode), we need to do some VGA black |
| * magic here that I know nothing about. --BenH |
| */ |
| radeon_write_mode (rinfo, &rinfo->init_state, 1); |
| #endif |
| |
| del_timer_sync(&rinfo->lvds_timer); |
| arch_phys_wc_del(rinfo->wc_cookie); |
| unregister_framebuffer(info); |
| |
| radeonfb_bl_exit(rinfo); |
| |
| iounmap(rinfo->mmio_base); |
| iounmap(rinfo->fb_base); |
| |
| pci_release_region(pdev, 2); |
| pci_release_region(pdev, 0); |
| |
| kfree(rinfo->mon1_EDID); |
| kfree(rinfo->mon2_EDID); |
| if (rinfo->mon1_modedb) |
| fb_destroy_modedb(rinfo->mon1_modedb); |
| #ifdef CONFIG_FB_RADEON_I2C |
| radeon_delete_i2c_busses(rinfo); |
| #endif |
| fb_dealloc_cmap(&info->cmap); |
| framebuffer_release(info); |
| } |
| |
| |
| static struct pci_driver radeonfb_driver = { |
| .name = "radeonfb", |
| .id_table = radeonfb_pci_table, |
| .probe = radeonfb_pci_register, |
| .remove = radeonfb_pci_unregister, |
| #ifdef CONFIG_PM |
| .suspend = radeonfb_pci_suspend, |
| .resume = radeonfb_pci_resume, |
| #endif /* CONFIG_PM */ |
| }; |
| |
| #ifndef MODULE |
| static int __init radeonfb_setup (char *options) |
| { |
| char *this_opt; |
| |
| if (!options || !*options) |
| return 0; |
| |
| while ((this_opt = strsep (&options, ",")) != NULL) { |
| if (!*this_opt) |
| continue; |
| |
| if (!strncmp(this_opt, "noaccel", 7)) { |
| noaccel = 1; |
| } else if (!strncmp(this_opt, "mirror", 6)) { |
| mirror = 1; |
| } else if (!strncmp(this_opt, "force_dfp", 9)) { |
| force_dfp = 1; |
| } else if (!strncmp(this_opt, "panel_yres:", 11)) { |
| panel_yres = simple_strtoul((this_opt+11), NULL, 0); |
| } else if (!strncmp(this_opt, "backlight:", 10)) { |
| backlight = simple_strtoul(this_opt+10, NULL, 0); |
| } else if (!strncmp(this_opt, "nomtrr", 6)) { |
| nomtrr = 1; |
| } else if (!strncmp(this_opt, "nomodeset", 9)) { |
| nomodeset = 1; |
| } else if (!strncmp(this_opt, "force_measure_pll", 17)) { |
| force_measure_pll = 1; |
| } else if (!strncmp(this_opt, "ignore_edid", 11)) { |
| ignore_edid = 1; |
| #if defined(CONFIG_PM) && defined(CONFIG_X86) |
| } else if (!strncmp(this_opt, "force_sleep", 11)) { |
| force_sleep = 1; |
| } else if (!strncmp(this_opt, "ignore_devlist", 14)) { |
| ignore_devlist = 1; |
| #endif |
| } else |
| mode_option = this_opt; |
| } |
| return 0; |
| } |
| #endif /* MODULE */ |
| |
| static int __init radeonfb_init (void) |
| { |
| #ifndef MODULE |
| char *option = NULL; |
| |
| if (fb_get_options("radeonfb", &option)) |
| return -ENODEV; |
| radeonfb_setup(option); |
| #endif |
| return pci_register_driver (&radeonfb_driver); |
| } |
| |
| |
| static void __exit radeonfb_exit (void) |
| { |
| pci_unregister_driver (&radeonfb_driver); |
| } |
| |
| module_init(radeonfb_init); |
| module_exit(radeonfb_exit); |
| |
| MODULE_AUTHOR("Ani Joshi"); |
| MODULE_DESCRIPTION("framebuffer driver for ATI Radeon chipset"); |
| MODULE_LICENSE("GPL"); |
| module_param(noaccel, bool, 0); |
| module_param(default_dynclk, int, 0); |
| MODULE_PARM_DESC(default_dynclk, "int: -2=enable on mobility only,-1=do not change,0=off,1=on"); |
| MODULE_PARM_DESC(noaccel, "bool: disable acceleration"); |
| module_param(nomodeset, bool, 0); |
| MODULE_PARM_DESC(nomodeset, "bool: disable actual setting of video mode"); |
| module_param(mirror, bool, 0); |
| MODULE_PARM_DESC(mirror, "bool: mirror the display to both monitors"); |
| module_param(force_dfp, bool, 0); |
| MODULE_PARM_DESC(force_dfp, "bool: force display to dfp"); |
| module_param(ignore_edid, bool, 0); |
| MODULE_PARM_DESC(ignore_edid, "bool: Ignore EDID data when doing DDC probe"); |
| module_param(monitor_layout, charp, 0); |
| MODULE_PARM_DESC(monitor_layout, "Specify monitor mapping (like XFree86)"); |
| module_param(force_measure_pll, bool, 0); |
| MODULE_PARM_DESC(force_measure_pll, "Force measurement of PLL (debug)"); |
| module_param(nomtrr, bool, 0); |
| MODULE_PARM_DESC(nomtrr, "bool: disable use of MTRR registers"); |
| module_param(panel_yres, int, 0); |
| MODULE_PARM_DESC(panel_yres, "int: set panel yres"); |
| module_param(mode_option, charp, 0); |
| MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" "); |
| #if defined(CONFIG_PM) && defined(CONFIG_X86) |
| module_param(force_sleep, bool, 0); |
| MODULE_PARM_DESC(force_sleep, "bool: force D2 sleep mode on all hardware"); |
| module_param(ignore_devlist, bool, 0); |
| MODULE_PARM_DESC(ignore_devlist, "bool: ignore workarounds for bugs in specific laptops"); |
| #endif |