| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/arch/arm/mach-omap1/board-nokia770.c |
| * |
| * Modified from board-generic.c |
| */ |
| #include <linux/clkdev.h> |
| #include <linux/irq.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/gpio/machine.h> |
| #include <linux/gpio/property.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/mutex.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| #include <linux/input.h> |
| #include <linux/omapfb.h> |
| |
| #include <linux/spi/spi.h> |
| #include <linux/workqueue.h> |
| #include <linux/delay.h> |
| |
| #include <linux/platform_data/keypad-omap.h> |
| #include <linux/platform_data/lcd-mipid.h> |
| #include <linux/platform_data/gpio-omap.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| |
| #include "mux.h" |
| #include "hardware.h" |
| #include "usb.h" |
| #include "common.h" |
| #include "clock.h" |
| #include "mmc.h" |
| |
| static const struct software_node nokia770_mpuio_gpiochip_node = { |
| .name = "mpuio", |
| }; |
| |
| static const struct software_node nokia770_gpiochip1_node = { |
| .name = "gpio-0-15", |
| }; |
| |
| static const struct software_node nokia770_gpiochip2_node = { |
| .name = "gpio-16-31", |
| }; |
| |
| static const struct software_node *nokia770_gpiochip_nodes[] = { |
| &nokia770_mpuio_gpiochip_node, |
| &nokia770_gpiochip1_node, |
| &nokia770_gpiochip2_node, |
| NULL |
| }; |
| |
| #define ADS7846_PENDOWN_GPIO 15 |
| |
| static const unsigned int nokia770_keymap[] = { |
| KEY(1, 0, GROUP_0 | KEY_UP), |
| KEY(2, 0, GROUP_1 | KEY_F5), |
| KEY(0, 1, GROUP_0 | KEY_LEFT), |
| KEY(1, 1, GROUP_0 | KEY_ENTER), |
| KEY(2, 1, GROUP_0 | KEY_RIGHT), |
| KEY(0, 2, GROUP_1 | KEY_ESC), |
| KEY(1, 2, GROUP_0 | KEY_DOWN), |
| KEY(2, 2, GROUP_1 | KEY_F4), |
| KEY(0, 3, GROUP_2 | KEY_F7), |
| KEY(1, 3, GROUP_2 | KEY_F8), |
| KEY(2, 3, GROUP_2 | KEY_F6), |
| }; |
| |
| static struct resource nokia770_kp_resources[] = { |
| [0] = { |
| .start = INT_KEYBOARD, |
| .end = INT_KEYBOARD, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static const struct matrix_keymap_data nokia770_keymap_data = { |
| .keymap = nokia770_keymap, |
| .keymap_size = ARRAY_SIZE(nokia770_keymap), |
| }; |
| |
| static struct omap_kp_platform_data nokia770_kp_data = { |
| .rows = 8, |
| .cols = 8, |
| .keymap_data = &nokia770_keymap_data, |
| .delay = 4, |
| }; |
| |
| static struct platform_device nokia770_kp_device = { |
| .name = "omap-keypad", |
| .id = -1, |
| .dev = { |
| .platform_data = &nokia770_kp_data, |
| }, |
| .num_resources = ARRAY_SIZE(nokia770_kp_resources), |
| .resource = nokia770_kp_resources, |
| }; |
| |
| static struct platform_device *nokia770_devices[] __initdata = { |
| &nokia770_kp_device, |
| }; |
| |
| static struct mipid_platform_data nokia770_mipid_platform_data = { }; |
| |
| static const struct omap_lcd_config nokia770_lcd_config __initconst = { |
| .ctrl_name = "hwa742", |
| }; |
| |
| static const struct property_entry nokia770_mipid_props[] = { |
| PROPERTY_ENTRY_GPIO("reset-gpios", &nokia770_gpiochip1_node, |
| 13, GPIO_ACTIVE_LOW), |
| { } |
| }; |
| |
| static const struct software_node nokia770_mipid_swnode = { |
| .name = "lcd_mipid", |
| .properties = nokia770_mipid_props, |
| }; |
| |
| static void __init mipid_dev_init(void) |
| { |
| nokia770_mipid_platform_data.data_lines = 16; |
| |
| omapfb_set_lcd_config(&nokia770_lcd_config); |
| } |
| |
| static const struct property_entry nokia770_ads7846_props[] = { |
| PROPERTY_ENTRY_STRING("compatible", "ti,ads7846"), |
| PROPERTY_ENTRY_U32("touchscreen-size-x", 4096), |
| PROPERTY_ENTRY_U32("touchscreen-size-y", 4096), |
| PROPERTY_ENTRY_U32("touchscreen-max-pressure", 256), |
| PROPERTY_ENTRY_U32("touchscreen-average-samples", 10), |
| PROPERTY_ENTRY_U16("ti,x-plate-ohms", 180), |
| PROPERTY_ENTRY_U16("ti,debounce-tol", 3), |
| PROPERTY_ENTRY_U16("ti,debounce-rep", 1), |
| PROPERTY_ENTRY_GPIO("pendown-gpios", &nokia770_gpiochip1_node, |
| ADS7846_PENDOWN_GPIO, GPIO_ACTIVE_LOW), |
| { } |
| }; |
| |
| static const struct software_node nokia770_ads7846_swnode = { |
| .name = "ads7846", |
| .properties = nokia770_ads7846_props, |
| }; |
| |
| static struct spi_board_info nokia770_spi_board_info[] __initdata = { |
| [0] = { |
| .modalias = "lcd_mipid", |
| .bus_num = 2, |
| .chip_select = 3, |
| .max_speed_hz = 12000000, |
| .platform_data = &nokia770_mipid_platform_data, |
| .swnode = &nokia770_mipid_swnode, |
| }, |
| [1] = { |
| .modalias = "ads7846", |
| .bus_num = 2, |
| .chip_select = 0, |
| .max_speed_hz = 2500000, |
| .swnode = &nokia770_ads7846_swnode, |
| }, |
| }; |
| |
| static void __init hwa742_dev_init(void) |
| { |
| clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL); |
| } |
| |
| /* assume no Mini-AB port */ |
| |
| static struct omap_usb_config nokia770_usb_config __initdata = { |
| .otg = 1, |
| .register_host = 1, |
| .register_dev = 1, |
| .hmc_mode = 16, |
| .pins[0] = 6, |
| .extcon = "tahvo-usb", |
| }; |
| |
| #if IS_ENABLED(CONFIG_MMC_OMAP) |
| |
| static struct gpiod_lookup_table nokia770_mmc_gpio_table = { |
| .dev_id = "mmci-omap.1", |
| .table = { |
| /* Slot index 0, VSD power, GPIO 41 */ |
| GPIO_LOOKUP_IDX("gpio-32-47", 9, |
| "vsd", 0, GPIO_ACTIVE_HIGH), |
| /* Slot index 0, switch, GPIO 23 */ |
| GPIO_LOOKUP_IDX("gpio-16-31", 7, |
| "cover", 0, GPIO_ACTIVE_HIGH), |
| { } |
| }, |
| }; |
| |
| static struct omap_mmc_platform_data nokia770_mmc2_data = { |
| .nr_slots = 1, |
| .max_freq = 12000000, |
| .slots[0] = { |
| .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| .name = "mmcblk", |
| }, |
| }; |
| |
| static struct omap_mmc_platform_data *nokia770_mmc_data[OMAP16XX_NR_MMC]; |
| |
| static void __init nokia770_mmc_init(void) |
| { |
| gpiod_add_lookup_table(&nokia770_mmc_gpio_table); |
| /* Only the second MMC controller is used */ |
| nokia770_mmc_data[1] = &nokia770_mmc2_data; |
| omap1_init_mmc(nokia770_mmc_data, OMAP16XX_NR_MMC); |
| } |
| |
| #else |
| static inline void nokia770_mmc_init(void) |
| { |
| } |
| #endif |
| |
| #if IS_ENABLED(CONFIG_I2C_CBUS_GPIO) |
| |
| static const struct software_node_ref_args nokia770_cbus_gpio_refs[] = { |
| SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_node, 9, 0), |
| SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_node, 10, 0), |
| SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_node, 11, 0), |
| }; |
| |
| static const struct property_entry nokia770_cbus_props[] = { |
| PROPERTY_ENTRY_REF_ARRAY("gpios", nokia770_cbus_gpio_refs), |
| { } |
| }; |
| |
| static struct platform_device nokia770_cbus_device = { |
| .name = "i2c-cbus-gpio", |
| .id = 2, |
| }; |
| |
| static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { |
| { |
| I2C_BOARD_INFO("retu", 0x01), |
| }, |
| { |
| I2C_BOARD_INFO("tahvo", 0x02), |
| }, |
| }; |
| |
| static void __init nokia770_cbus_init(void) |
| { |
| struct gpio_desc *d; |
| int irq; |
| |
| d = gpiod_get(NULL, "retu_irq", GPIOD_IN); |
| if (IS_ERR(d)) { |
| pr_err("Unable to get CBUS Retu IRQ GPIO descriptor\n"); |
| } else { |
| irq = gpiod_to_irq(d); |
| irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); |
| nokia770_i2c_board_info_2[0].irq = irq; |
| } |
| d = gpiod_get(NULL, "tahvo_irq", GPIOD_IN); |
| if (IS_ERR(d)) { |
| pr_err("Unable to get CBUS Tahvo IRQ GPIO descriptor\n"); |
| } else { |
| irq = gpiod_to_irq(d); |
| irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); |
| nokia770_i2c_board_info_2[1].irq = irq; |
| } |
| i2c_register_board_info(2, nokia770_i2c_board_info_2, |
| ARRAY_SIZE(nokia770_i2c_board_info_2)); |
| device_create_managed_software_node(&nokia770_cbus_device.dev, |
| nokia770_cbus_props, NULL); |
| platform_device_register(&nokia770_cbus_device); |
| } |
| #else /* CONFIG_I2C_CBUS_GPIO */ |
| static void __init nokia770_cbus_init(void) |
| { |
| } |
| #endif /* CONFIG_I2C_CBUS_GPIO */ |
| |
| static struct gpiod_lookup_table nokia770_irq_gpio_table = { |
| .dev_id = NULL, |
| .table = { |
| /* GPIO used by SPI device 1 */ |
| GPIO_LOOKUP("gpio-0-15", 15, "ads7846_irq", |
| GPIO_ACTIVE_HIGH), |
| /* GPIO used for retu IRQ */ |
| GPIO_LOOKUP("gpio-48-63", 15, "retu_irq", |
| GPIO_ACTIVE_HIGH), |
| /* GPIO used for tahvo IRQ */ |
| GPIO_LOOKUP("gpio-32-47", 8, "tahvo_irq", |
| GPIO_ACTIVE_HIGH), |
| /* GPIOs used by serial wakeup IRQs */ |
| GPIO_LOOKUP_IDX("gpio-32-47", 5, "wakeup", 0, |
| GPIO_ACTIVE_HIGH), |
| GPIO_LOOKUP_IDX("gpio-16-31", 2, "wakeup", 1, |
| GPIO_ACTIVE_HIGH), |
| GPIO_LOOKUP_IDX("gpio-48-63", 1, "wakeup", 2, |
| GPIO_ACTIVE_HIGH), |
| { } |
| }, |
| }; |
| |
| static void __init omap_nokia770_init(void) |
| { |
| struct gpio_desc *d; |
| |
| /* On Nokia 770, the SleepX signal is masked with an |
| * MPUIO line by default. It has to be unmasked for it |
| * to become functional */ |
| |
| /* SleepX mask direction */ |
| omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); |
| /* Unmask SleepX signal */ |
| omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); |
| |
| software_node_register_node_group(nokia770_gpiochip_nodes); |
| platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); |
| |
| gpiod_add_lookup_table(&nokia770_irq_gpio_table); |
| d = gpiod_get(NULL, "ads7846_irq", GPIOD_IN); |
| if (IS_ERR(d)) |
| pr_err("Unable to get ADS7846 IRQ GPIO descriptor\n"); |
| else |
| nokia770_spi_board_info[1].irq = gpiod_to_irq(d); |
| |
| spi_register_board_info(nokia770_spi_board_info, |
| ARRAY_SIZE(nokia770_spi_board_info)); |
| omap_serial_init(); |
| omap_register_i2c_bus(1, 100, NULL, 0); |
| hwa742_dev_init(); |
| mipid_dev_init(); |
| omap1_usb_init(&nokia770_usb_config); |
| nokia770_mmc_init(); |
| nokia770_cbus_init(); |
| } |
| |
| MACHINE_START(NOKIA770, "Nokia 770") |
| .atag_offset = 0x100, |
| .map_io = omap1_map_io, |
| .init_early = omap1_init_early, |
| .init_irq = omap1_init_irq, |
| .init_machine = omap_nokia770_init, |
| .init_late = omap1_init_late, |
| .init_time = omap1_timer_init, |
| .restart = omap1_restart, |
| MACHINE_END |