| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * linux/arch/arm/plat-omap/sram-fn.S |
| * |
| * Functions that need to be run in internal SRAM |
| */ |
| |
| #include <linux/linkage.h> |
| #include <linux/soc/ti/omap1-io.h> |
| |
| #include <asm/assembler.h> |
| |
| #include "hardware.h" |
| #include "iomap.h" |
| |
| .text |
| |
| /* |
| * Reprograms ULPD and CKCTL. |
| */ |
| .align 3 |
| ENTRY(omap1_sram_reprogram_clock) |
| stmfd sp!, {r0 - r12, lr} @ save registers on stack |
| |
| mov r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0xff000000 |
| orr r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x00ff0000 |
| orr r2, r2, #OMAP1_IO_ADDRESS(DPLL_CTL) & 0x0000ff00 |
| |
| mov r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0xff000000 |
| orr r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x00ff0000 |
| orr r3, r3, #OMAP1_IO_ADDRESS(ARM_CKCTL) & 0x0000ff00 |
| |
| tst r0, #1 << 4 @ want lock mode? |
| beq newck @ nope |
| bic r0, r0, #1 << 4 @ else clear lock bit |
| strh r0, [r2] @ set dpll into bypass mode |
| orr r0, r0, #1 << 4 @ set lock bit again |
| |
| newck: |
| strh r1, [r3] @ write new ckctl value |
| strh r0, [r2] @ write new dpll value |
| |
| mov r4, #0x0700 @ let the clocks settle |
| orr r4, r4, #0x00ff |
| delay: sub r4, r4, #1 |
| cmp r4, #0 |
| bne delay |
| |
| lock: ldrh r4, [r2], #0 @ read back dpll value |
| tst r0, #1 << 4 @ want lock mode? |
| beq out @ nope |
| tst r4, #1 << 0 @ dpll rate locked? |
| beq lock @ try again |
| |
| out: |
| ldmfd sp!, {r0 - r12, pc} @ restore regs and return |
| ENTRY(omap1_sram_reprogram_clock_sz) |
| .word . - omap1_sram_reprogram_clock |
