blob: 682e417be5a3e49d3a4bc8c63bac963670f09af1 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Microchip Polarfire SoC "Auto Update" FPGA reprogramming.
*
* Documentation of this functionality is available in the "PolarFire® FPGA and
* PolarFire SoC FPGA Programming" User Guide.
*
* Copyright (c) 2022-2023 Microchip Corporation. All rights reserved.
*
* Author: Conor Dooley <conor.dooley@microchip.com>
*/
#include <linux/debugfs.h>
#include <linux/firmware.h>
#include <linux/math.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/platform_device.h>
#include <linux/sizes.h>
#include <soc/microchip/mpfs.h>
#define AUTO_UPDATE_DEFAULT_MBOX_OFFSET 0u
#define AUTO_UPDATE_DEFAULT_RESP_OFFSET 0u
#define AUTO_UPDATE_FEATURE_CMD_OPCODE 0x05u
#define AUTO_UPDATE_FEATURE_CMD_DATA_SIZE 0u
#define AUTO_UPDATE_FEATURE_RESP_SIZE 33u
#define AUTO_UPDATE_FEATURE_CMD_DATA NULL
#define AUTO_UPDATE_FEATURE_ENABLED BIT(5)
#define AUTO_UPDATE_AUTHENTICATE_CMD_OPCODE 0x22u
#define AUTO_UPDATE_AUTHENTICATE_CMD_DATA_SIZE 0u
#define AUTO_UPDATE_AUTHENTICATE_RESP_SIZE 1u
#define AUTO_UPDATE_AUTHENTICATE_CMD_DATA NULL
#define AUTO_UPDATE_PROGRAM_CMD_OPCODE 0x46u
#define AUTO_UPDATE_PROGRAM_CMD_DATA_SIZE 0u
#define AUTO_UPDATE_PROGRAM_RESP_SIZE 1u
#define AUTO_UPDATE_PROGRAM_CMD_DATA NULL
/*
* SPI Flash layout example:
* |------------------------------| 0x0000000
* | 1 KiB |
* | SPI "directories" |
* |------------------------------| 0x0000400
* | 1 MiB |
* | Reserved area |
* | Used for bitstream info |
* |------------------------------| 0x0100400
* | 20 MiB |
* | Golden Image |
* |------------------------------| 0x1500400
* | 20 MiB |
* | Auto Upgrade Image |
* |------------------------------| 0x2900400
* | 20 MiB |
* | Reserved for multi-image IAP |
* | Unused for Auto Upgrade |
* |------------------------------| 0x3D00400
* | ? B |
* | Unused |
* |------------------------------| 0x?
*/
#define AUTO_UPDATE_DIRECTORY_BASE 0u
#define AUTO_UPDATE_DIRECTORY_WIDTH 4u
#define AUTO_UPDATE_GOLDEN_INDEX 0u
#define AUTO_UPDATE_UPGRADE_INDEX 1u
#define AUTO_UPDATE_BLANK_INDEX 2u
#define AUTO_UPDATE_GOLDEN_DIRECTORY (AUTO_UPDATE_DIRECTORY_WIDTH * AUTO_UPDATE_GOLDEN_INDEX)
#define AUTO_UPDATE_UPGRADE_DIRECTORY (AUTO_UPDATE_DIRECTORY_WIDTH * AUTO_UPDATE_UPGRADE_INDEX)
#define AUTO_UPDATE_BLANK_DIRECTORY (AUTO_UPDATE_DIRECTORY_WIDTH * AUTO_UPDATE_BLANK_INDEX)
#define AUTO_UPDATE_DIRECTORY_SIZE SZ_1K
#define AUTO_UPDATE_RESERVED_SIZE SZ_1M
#define AUTO_UPDATE_BITSTREAM_BASE (AUTO_UPDATE_DIRECTORY_SIZE + AUTO_UPDATE_RESERVED_SIZE)
#define AUTO_UPDATE_TIMEOUT_MS 60000
struct mpfs_auto_update_priv {
struct mpfs_sys_controller *sys_controller;
struct device *dev;
struct mtd_info *flash;
struct fw_upload *fw_uploader;
struct completion programming_complete;
size_t size_per_bitstream;
bool cancel_request;
};
static enum fw_upload_err mpfs_auto_update_prepare(struct fw_upload *fw_uploader, const u8 *data,
u32 size)
{
struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
size_t erase_size = AUTO_UPDATE_DIRECTORY_SIZE;
/*
* Verifying the Golden Image is idealistic. It will be evaluated
* against the currently programmed image and thus may fail - due to
* either rollback protection (if its an older version than that in use)
* or if the version is the same as that of the in-use image.
* Extracting the information as to why a failure occurred is not
* currently possible due to limitations of the system controller
* driver. If those are fixed, verification of the Golden Image should
* be added here.
*/
priv->flash = mpfs_sys_controller_get_flash(priv->sys_controller);
if (!priv->flash)
return FW_UPLOAD_ERR_HW_ERROR;
erase_size = round_up(erase_size, (u64)priv->flash->erasesize);
/*
* We need to calculate if we have enough space in the flash for the
* new image.
* First, chop off the first 1 KiB as it's reserved for the directory.
* The 1 MiB reserved for design info needs to be ignored also.
* All that remains is carved into 3 & rounded down to the erasesize.
* If this is smaller than the image size, we abort.
* There's also no need to consume more than 20 MiB per image.
*/
priv->size_per_bitstream = priv->flash->size - SZ_1K - SZ_1M;
priv->size_per_bitstream = round_down(priv->size_per_bitstream / 3, erase_size);
if (priv->size_per_bitstream > 20 * SZ_1M)
priv->size_per_bitstream = 20 * SZ_1M;
if (priv->size_per_bitstream < size) {
dev_err(priv->dev,
"flash device has insufficient capacity to store this bitstream\n");
return FW_UPLOAD_ERR_INVALID_SIZE;
}
priv->cancel_request = false;
return FW_UPLOAD_ERR_NONE;
}
static void mpfs_auto_update_cancel(struct fw_upload *fw_uploader)
{
struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
priv->cancel_request = true;
}
static enum fw_upload_err mpfs_auto_update_poll_complete(struct fw_upload *fw_uploader)
{
struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
int ret;
/*
* There is no meaningful way to get the status of the programming while
* it is in progress, so attempting anything other than waiting for it
* to complete would be misplaced.
*/
ret = wait_for_completion_timeout(&priv->programming_complete,
msecs_to_jiffies(AUTO_UPDATE_TIMEOUT_MS));
if (ret)
return FW_UPLOAD_ERR_TIMEOUT;
return FW_UPLOAD_ERR_NONE;
}
static int mpfs_auto_update_verify_image(struct fw_upload *fw_uploader)
{
struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
struct mpfs_mss_response *response;
struct mpfs_mss_msg *message;
u32 *response_msg;
int ret;
response_msg = devm_kzalloc(priv->dev, AUTO_UPDATE_FEATURE_RESP_SIZE * sizeof(*response_msg),
GFP_KERNEL);
if (!response_msg)
return -ENOMEM;
response = devm_kzalloc(priv->dev, sizeof(struct mpfs_mss_response), GFP_KERNEL);
if (!response) {
ret = -ENOMEM;
goto free_response_msg;
}
message = devm_kzalloc(priv->dev, sizeof(struct mpfs_mss_msg), GFP_KERNEL);
if (!message) {
ret = -ENOMEM;
goto free_response;
}
/*
* The system controller can verify that an image in the flash is valid.
* Rather than duplicate the check in this driver, call the relevant
* service from the system controller instead.
* This service has no command data and no response data. It overloads
* mbox_offset with the image index in the flash's SPI directory where
* the bitstream is located.
*/
response->resp_msg = response_msg;
response->resp_size = AUTO_UPDATE_AUTHENTICATE_RESP_SIZE;
message->cmd_opcode = AUTO_UPDATE_AUTHENTICATE_CMD_OPCODE;
message->cmd_data_size = AUTO_UPDATE_AUTHENTICATE_CMD_DATA_SIZE;
message->response = response;
message->cmd_data = AUTO_UPDATE_AUTHENTICATE_CMD_DATA;
message->mbox_offset = AUTO_UPDATE_UPGRADE_INDEX;
message->resp_offset = AUTO_UPDATE_DEFAULT_RESP_OFFSET;
dev_info(priv->dev, "Running verification of Upgrade Image\n");
ret = mpfs_blocking_transaction(priv->sys_controller, message);
if (ret | response->resp_status) {
dev_warn(priv->dev, "Verification of Upgrade Image failed!\n");
ret = ret ? ret : -EBADMSG;
}
dev_info(priv->dev, "Verification of Upgrade Image passed!\n");
devm_kfree(priv->dev, message);
free_response:
devm_kfree(priv->dev, response);
free_response_msg:
devm_kfree(priv->dev, response_msg);
return ret;
}
static int mpfs_auto_update_set_image_address(struct mpfs_auto_update_priv *priv, char *buffer,
u32 image_address, loff_t directory_address)
{
struct erase_info erase;
size_t erase_size = AUTO_UPDATE_DIRECTORY_SIZE;
size_t bytes_written = 0, bytes_read = 0;
int ret;
erase_size = round_up(erase_size, (u64)priv->flash->erasesize);
erase.addr = AUTO_UPDATE_DIRECTORY_BASE;
erase.len = erase_size;
/*
* We need to write the "SPI DIRECTORY" to the first 1 KiB, telling
* the system controller where to find the actual bitstream. Since
* this is spi-nor, we have to read the first eraseblock, erase that
* portion of the flash, modify the data and then write it back.
* There's no need to do this though if things are already the way they
* should be, so check and save the write in that case.
*/
ret = mtd_read(priv->flash, AUTO_UPDATE_DIRECTORY_BASE, erase_size, &bytes_read,
(u_char *)buffer);
if (ret)
return ret;
if (bytes_read != erase_size)
return -EIO;
if ((*(u32 *)(buffer + AUTO_UPDATE_UPGRADE_DIRECTORY) == image_address) &&
!(*(u32 *)(buffer + AUTO_UPDATE_BLANK_DIRECTORY)))
return 0;
ret = mtd_erase(priv->flash, &erase);
if (ret)
return ret;
/*
* Populate the image address and then zero out the next directory so
* that the system controller doesn't complain if in "Single Image"
* mode.
*/
memcpy(buffer + AUTO_UPDATE_UPGRADE_DIRECTORY, &image_address,
AUTO_UPDATE_DIRECTORY_WIDTH);
memset(buffer + AUTO_UPDATE_BLANK_DIRECTORY, 0x0, AUTO_UPDATE_DIRECTORY_WIDTH);
dev_info(priv->dev, "Writing the image address (%x) to the flash directory (%llx)\n",
image_address, directory_address);
ret = mtd_write(priv->flash, 0x0, erase_size, &bytes_written, (u_char *)buffer);
if (ret)
return ret;
if (bytes_written != erase_size)
return ret;
return 0;
}
static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const u8 *data,
u32 offset, u32 size, u32 *written)
{
struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
struct erase_info erase;
char *buffer;
loff_t directory_address = AUTO_UPDATE_UPGRADE_DIRECTORY;
size_t erase_size = AUTO_UPDATE_DIRECTORY_SIZE;
size_t bytes_written = 0;
u32 image_address;
int ret;
erase_size = round_up(erase_size, (u64)priv->flash->erasesize);
image_address = AUTO_UPDATE_BITSTREAM_BASE +
AUTO_UPDATE_UPGRADE_INDEX * priv->size_per_bitstream;
buffer = devm_kzalloc(priv->dev, erase_size, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
ret = mpfs_auto_update_set_image_address(priv, buffer, image_address, directory_address);
if (ret) {
dev_err(priv->dev, "failed to set image address in the SPI directory: %d\n", ret);
goto out;
}
/*
* Now the .spi image itself can be written to the flash. Preservation
* of contents here is not important here, unlike the spi "directory"
* which must be RMWed.
*/
erase.len = round_up(size, (size_t)priv->flash->erasesize);
erase.addr = image_address;
dev_info(priv->dev, "Erasing the flash at address (%x)\n", image_address);
ret = mtd_erase(priv->flash, &erase);
if (ret)
goto out;
/*
* No parsing etc of the bitstream is required. The system controller
* will do all of that itself - including verifying that the bitstream
* is valid.
*/
dev_info(priv->dev, "Writing the image to the flash at address (%x)\n", image_address);
ret = mtd_write(priv->flash, (loff_t)image_address, size, &bytes_written, data);
if (ret)
goto out;
if (bytes_written != size) {
ret = -EIO;
goto out;
}
*written = bytes_written;
out:
devm_kfree(priv->dev, buffer);
return ret;
}
static enum fw_upload_err mpfs_auto_update_write(struct fw_upload *fw_uploader, const u8 *data,
u32 offset, u32 size, u32 *written)
{
struct mpfs_auto_update_priv *priv = fw_uploader->dd_handle;
enum fw_upload_err err = FW_UPLOAD_ERR_NONE;
int ret;
reinit_completion(&priv->programming_complete);
ret = mpfs_auto_update_write_bitstream(fw_uploader, data, offset, size, written);
if (ret) {
err = FW_UPLOAD_ERR_RW_ERROR;
goto out;
}
if (priv->cancel_request) {
err = FW_UPLOAD_ERR_CANCELED;
goto out;
}
ret = mpfs_auto_update_verify_image(fw_uploader);
if (ret)
err = FW_UPLOAD_ERR_FW_INVALID;
out:
complete(&priv->programming_complete);
return err;
}
static const struct fw_upload_ops mpfs_auto_update_ops = {
.prepare = mpfs_auto_update_prepare,
.write = mpfs_auto_update_write,
.poll_complete = mpfs_auto_update_poll_complete,
.cancel = mpfs_auto_update_cancel,
};
static int mpfs_auto_update_available(struct mpfs_auto_update_priv *priv)
{
struct mpfs_mss_response *response;
struct mpfs_mss_msg *message;
u32 *response_msg;
int ret;
response_msg = devm_kzalloc(priv->dev, AUTO_UPDATE_FEATURE_RESP_SIZE * sizeof(response_msg),
GFP_KERNEL);
if (!response_msg)
return -ENOMEM;
response = devm_kzalloc(priv->dev, sizeof(struct mpfs_mss_response), GFP_KERNEL);
if (!response)
return -ENOMEM;
message = devm_kzalloc(priv->dev, sizeof(struct mpfs_mss_msg), GFP_KERNEL);
if (!message)
return -ENOMEM;
/*
* To verify that Auto Update is possible, the "Query Security Service
* Request" is performed.
* This service has no command data & does not overload mbox_offset.
*/
response->resp_msg = response_msg;
response->resp_size = AUTO_UPDATE_FEATURE_RESP_SIZE;
message->cmd_opcode = AUTO_UPDATE_FEATURE_CMD_OPCODE;
message->cmd_data_size = AUTO_UPDATE_FEATURE_CMD_DATA_SIZE;
message->response = response;
message->cmd_data = AUTO_UPDATE_FEATURE_CMD_DATA;
message->mbox_offset = AUTO_UPDATE_DEFAULT_MBOX_OFFSET;
message->resp_offset = AUTO_UPDATE_DEFAULT_RESP_OFFSET;
ret = mpfs_blocking_transaction(priv->sys_controller, message);
if (ret)
return ret;
/*
* Currently, the system controller's firmware does not generate any
* interrupts for failed services, so mpfs_blocking_transaction() should
* time out & therefore return an error.
* Hitting this check is highly unlikely at present, but if the system
* controller's behaviour changes so that it does generate interrupts
* for failed services, it will be required.
*/
if (response->resp_status)
return -EIO;
/*
* Bit 5 of byte 1 is "UL_Auto Update" & if it is set, Auto Update is
* not possible.
*/
if (response_msg[1] & AUTO_UPDATE_FEATURE_ENABLED)
return -EPERM;
return 0;
}
static int mpfs_auto_update_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mpfs_auto_update_priv *priv;
struct fw_upload *fw_uploader;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->sys_controller = mpfs_sys_controller_get(dev);
if (IS_ERR(priv->sys_controller))
return dev_err_probe(dev, PTR_ERR(priv->sys_controller),
"Could not register as a sub device of the system controller\n");
priv->dev = dev;
platform_set_drvdata(pdev, priv);
ret = mpfs_auto_update_available(priv);
if (ret)
return dev_err_probe(dev, ret,
"The current bitstream does not support auto-update\n");
init_completion(&priv->programming_complete);
fw_uploader = firmware_upload_register(THIS_MODULE, dev, "mpfs-auto-update",
&mpfs_auto_update_ops, priv);
if (IS_ERR(fw_uploader))
return dev_err_probe(dev, PTR_ERR(fw_uploader),
"Failed to register the bitstream uploader\n");
priv->fw_uploader = fw_uploader;
return 0;
}
static void mpfs_auto_update_remove(struct platform_device *pdev)
{
struct mpfs_auto_update_priv *priv = platform_get_drvdata(pdev);
firmware_upload_unregister(priv->fw_uploader);
}
static struct platform_driver mpfs_auto_update_driver = {
.driver = {
.name = "mpfs-auto-update",
},
.probe = mpfs_auto_update_probe,
.remove_new = mpfs_auto_update_remove,
};
module_platform_driver(mpfs_auto_update_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>");
MODULE_DESCRIPTION("PolarFire SoC Auto Update FPGA reprogramming");