blob: 648ce9201426561ca2049d4c832d89f3e31109f9 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Novatek NT35950 DriverIC panels driver
*
* Copyright (c) 2021 AngeloGioacchino Del Regno
* <angelogioacchino.delregno@somainline.org>
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_graph.h>
#include <linux/regulator/consumer.h>
#include <drm/drm_connector.h>
#include <drm/drm_crtc.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#define MCS_CMD_MAUCCTR 0xf0 /* Manufacturer command enable */
#define MCS_PARAM_SCALER_FUNCTION 0x58 /* Scale-up function */
#define MCS_PARAM_SCALEUP_MODE 0xc9
#define MCS_SCALEUP_SIMPLE 0x0
#define MCS_SCALEUP_BILINEAR BIT(0)
#define MCS_SCALEUP_DUPLICATE (BIT(0) | BIT(4))
/* VESA Display Stream Compression param */
#define MCS_PARAM_VESA_DSC_ON 0x03
/* Data Compression mode */
#define MCS_PARAM_DATA_COMPRESSION 0x90
#define MCS_DATA_COMPRESSION_NONE 0x00
#define MCS_DATA_COMPRESSION_FBC 0x02
#define MCS_DATA_COMPRESSION_DSC 0x03
/* Display Output control */
#define MCS_PARAM_DISP_OUTPUT_CTRL 0xb4
#define MCS_DISP_OUT_SRAM_EN BIT(0)
#define MCS_DISP_OUT_VIDEO_MODE BIT(4)
/* VESA Display Stream Compression setting */
#define MCS_PARAM_VESA_DSC_SETTING 0xc0
/* SubPixel Rendering (SPR) */
#define MCS_PARAM_SPR_EN 0xe3
#define MCS_PARAM_SPR_MODE 0xef
#define MCS_SPR_MODE_YYG_RAINBOW_RGB 0x01
#define NT35950_VREG_MAX 4
struct nt35950 {
struct drm_panel panel;
struct drm_connector *connector;
struct mipi_dsi_device *dsi[2];
struct regulator_bulk_data vregs[NT35950_VREG_MAX];
struct gpio_desc *reset_gpio;
const struct nt35950_panel_desc *desc;
int cur_mode;
u8 last_page;
};
struct nt35950_panel_mode {
const struct drm_display_mode mode;
bool enable_sram;
bool is_video_mode;
u8 scaler_on;
u8 scaler_mode;
u8 compression;
u8 spr_en;
u8 spr_mode;
};
struct nt35950_panel_desc {
const char *model_name;
const struct mipi_dsi_device_info dsi_info;
const struct nt35950_panel_mode *mode_data;
bool is_dual_dsi;
u8 num_lanes;
u8 num_modes;
};
static inline struct nt35950 *to_nt35950(struct drm_panel *panel)
{
return container_of(panel, struct nt35950, panel);
}
static void nt35950_reset(struct nt35950 *nt)
{
gpiod_set_value_cansleep(nt->reset_gpio, 1);
usleep_range(12000, 13000);
gpiod_set_value_cansleep(nt->reset_gpio, 0);
usleep_range(300, 400);
gpiod_set_value_cansleep(nt->reset_gpio, 1);
usleep_range(12000, 13000);
}
/*
* nt35950_set_cmd2_page - Select manufacturer control (CMD2) page
* @nt: Main driver structure
* @page: Page number (0-7)
*
* Return: Number of transferred bytes or negative number on error
*/
static int nt35950_set_cmd2_page(struct nt35950 *nt, u8 page)
{
const u8 mauc_cmd2_page[] = { MCS_CMD_MAUCCTR, 0x55, 0xaa, 0x52,
0x08, page };
int ret;
ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], mauc_cmd2_page,
ARRAY_SIZE(mauc_cmd2_page));
if (ret < 0)
return ret;
nt->last_page = page;
return 0;
}
/*
* nt35950_set_data_compression - Set data compression mode
* @nt: Main driver structure
* @comp_mode: Compression mode
*
* Return: Number of transferred bytes or negative number on error
*/
static int nt35950_set_data_compression(struct nt35950 *nt, u8 comp_mode)
{
u8 cmd_data_compression[] = { MCS_PARAM_DATA_COMPRESSION, comp_mode };
u8 cmd_vesa_dsc_on[] = { MCS_PARAM_VESA_DSC_ON, !!comp_mode };
u8 cmd_vesa_dsc_setting[] = { MCS_PARAM_VESA_DSC_SETTING, 0x03 };
u8 last_page = nt->last_page;
int ret;
/* Set CMD2 Page 0 if we're not there yet */
if (last_page != 0) {
ret = nt35950_set_cmd2_page(nt, 0);
if (ret < 0)
return ret;
}
ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_data_compression,
ARRAY_SIZE(cmd_data_compression));
if (ret < 0)
return ret;
ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_vesa_dsc_on,
ARRAY_SIZE(cmd_vesa_dsc_on));
if (ret < 0)
return ret;
/* Set the vesa dsc setting on Page 4 */
ret = nt35950_set_cmd2_page(nt, 4);
if (ret < 0)
return ret;
/* Display Stream Compression setting, always 0x03 */
ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_vesa_dsc_setting,
ARRAY_SIZE(cmd_vesa_dsc_setting));
if (ret < 0)
return ret;
/* Get back to the previously set page */
return nt35950_set_cmd2_page(nt, last_page);
}
/*
* nt35950_set_scaler - Enable/disable resolution upscaling
* @nt: Main driver structure
* @scale_up: Scale up function control
*
* Return: Number of transferred bytes or negative number on error
*/
static int nt35950_set_scaler(struct nt35950 *nt, u8 scale_up)
{
u8 cmd_scaler[] = { MCS_PARAM_SCALER_FUNCTION, scale_up };
return mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_scaler,
ARRAY_SIZE(cmd_scaler));
}
/*
* nt35950_set_scale_mode - Resolution upscaling mode
* @nt: Main driver structure
* @mode: Scaler mode (MCS_DATA_COMPRESSION_*)
*
* Return: Number of transferred bytes or negative number on error
*/
static int nt35950_set_scale_mode(struct nt35950 *nt, u8 mode)
{
u8 cmd_scaler[] = { MCS_PARAM_SCALEUP_MODE, mode };
return mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_scaler,
ARRAY_SIZE(cmd_scaler));
}
/*
* nt35950_inject_black_image - Display a completely black image
* @nt: Main driver structure
*
* After IC setup, the attached panel may show random data
* due to driveric behavior changes (resolution, compression,
* scaling, etc). This function, called after parameters setup,
* makes the driver ic to output a completely black image to
* the display.
* It makes sense to push a black image before sending the sleep-out
* and display-on commands.
*
* Return: Number of transferred bytes or negative number on error
*/
static int nt35950_inject_black_image(struct nt35950 *nt)
{
const u8 cmd0_black_img[] = { 0x6f, 0x01 };
const u8 cmd1_black_img[] = { 0xf3, 0x10 };
u8 cmd_test[] = { 0xff, 0xaa, 0x55, 0xa5, 0x80 };
int ret;
/* Enable test command */
ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_test, ARRAY_SIZE(cmd_test));
if (ret < 0)
return ret;
/* Send a black image */
ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd0_black_img,
ARRAY_SIZE(cmd0_black_img));
if (ret < 0)
return ret;
ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd1_black_img,
ARRAY_SIZE(cmd1_black_img));
if (ret < 0)
return ret;
/* Disable test command */
cmd_test[ARRAY_SIZE(cmd_test) - 1] = 0x00;
return mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_test, ARRAY_SIZE(cmd_test));
}
/*
* nt35950_set_dispout - Set Display Output register parameters
* @nt: Main driver structure
*
* Return: Number of transferred bytes or negative number on error
*/
static int nt35950_set_dispout(struct nt35950 *nt)
{
u8 cmd_dispout[] = { MCS_PARAM_DISP_OUTPUT_CTRL, 0x00 };
const struct nt35950_panel_mode *mode_data = nt->desc->mode_data;
if (mode_data[nt->cur_mode].is_video_mode)
cmd_dispout[1] |= MCS_DISP_OUT_VIDEO_MODE;
if (mode_data[nt->cur_mode].enable_sram)
cmd_dispout[1] |= MCS_DISP_OUT_SRAM_EN;
return mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_dispout,
ARRAY_SIZE(cmd_dispout));
}
static int nt35950_get_current_mode(struct nt35950 *nt)
{
struct drm_connector *connector = nt->connector;
struct drm_crtc_state *crtc_state;
int i;
/* Return the default (first) mode if no info available yet */
if (!connector->state || !connector->state->crtc)
return 0;
crtc_state = connector->state->crtc->state;
for (i = 0; i < nt->desc->num_modes; i++) {
if (drm_mode_match(&crtc_state->mode,
&nt->desc->mode_data[i].mode,
DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_CLOCK))
return i;
}
return 0;
}
static int nt35950_on(struct nt35950 *nt)
{
const struct nt35950_panel_mode *mode_data = nt->desc->mode_data;
struct mipi_dsi_device *dsi = nt->dsi[0];
struct device *dev = &dsi->dev;
int ret;
nt->cur_mode = nt35950_get_current_mode(nt);
nt->dsi[0]->mode_flags |= MIPI_DSI_MODE_LPM;
nt->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;
ret = nt35950_set_cmd2_page(nt, 0);
if (ret < 0)
return ret;
ret = nt35950_set_data_compression(nt, mode_data[nt->cur_mode].compression);
if (ret < 0)
return ret;
ret = nt35950_set_scale_mode(nt, mode_data[nt->cur_mode].scaler_mode);
if (ret < 0)
return ret;
ret = nt35950_set_scaler(nt, mode_data[nt->cur_mode].scaler_on);
if (ret < 0)
return ret;
ret = nt35950_set_dispout(nt);
if (ret < 0)
return ret;
ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
if (ret < 0) {
dev_err(dev, "Failed to set tear on: %d\n", ret);
return ret;
}
ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0);
if (ret < 0) {
dev_err(dev, "Failed to set tear scanline: %d\n", ret);
return ret;
}
/* CMD2 Page 1 */
ret = nt35950_set_cmd2_page(nt, 1);
if (ret < 0)
return ret;
/* Unknown command */
mipi_dsi_dcs_write_seq(dsi, 0xd4, 0x88, 0x88);
/* CMD2 Page 7 */
ret = nt35950_set_cmd2_page(nt, 7);
if (ret < 0)
return ret;
/* Enable SubPixel Rendering */
mipi_dsi_dcs_write_seq(dsi, MCS_PARAM_SPR_EN, 0x01);
/* SPR Mode: YYG Rainbow-RGB */
mipi_dsi_dcs_write_seq(dsi, MCS_PARAM_SPR_MODE, MCS_SPR_MODE_YYG_RAINBOW_RGB);
/* CMD3 */
ret = nt35950_inject_black_image(nt);
if (ret < 0)
return ret;
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0)
return ret;
msleep(120);
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0)
return ret;
msleep(120);
nt->dsi[0]->mode_flags &= ~MIPI_DSI_MODE_LPM;
nt->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM;
return 0;
}
static int nt35950_off(struct nt35950 *nt)
{
struct device *dev = &nt->dsi[0]->dev;
int ret;
ret = mipi_dsi_dcs_set_display_off(nt->dsi[0]);
if (ret < 0) {
dev_err(dev, "Failed to set display off: %d\n", ret);
goto set_lpm;
}
usleep_range(10000, 11000);
ret = mipi_dsi_dcs_enter_sleep_mode(nt->dsi[0]);
if (ret < 0) {
dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
goto set_lpm;
}
msleep(150);
set_lpm:
nt->dsi[0]->mode_flags |= MIPI_DSI_MODE_LPM;
nt->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;
return 0;
}
static int nt35950_sharp_init_vregs(struct nt35950 *nt, struct device *dev)
{
int ret;
nt->vregs[0].supply = "vddio";
nt->vregs[1].supply = "avdd";
nt->vregs[2].supply = "avee";
nt->vregs[3].supply = "dvdd";
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(nt->vregs),
nt->vregs);
if (ret < 0)
return ret;
ret = regulator_is_supported_voltage(nt->vregs[0].consumer,
1750000, 1950000);
if (!ret)
return -EINVAL;
ret = regulator_is_supported_voltage(nt->vregs[1].consumer,
5200000, 5900000);
if (!ret)
return -EINVAL;
/* AVEE is negative: -5.90V to -5.20V */
ret = regulator_is_supported_voltage(nt->vregs[2].consumer,
5200000, 5900000);
if (!ret)
return -EINVAL;
ret = regulator_is_supported_voltage(nt->vregs[3].consumer,
1300000, 1400000);
if (!ret)
return -EINVAL;
return 0;
}
static int nt35950_prepare(struct drm_panel *panel)
{
struct nt35950 *nt = to_nt35950(panel);
struct device *dev = &nt->dsi[0]->dev;
int ret;
ret = regulator_enable(nt->vregs[0].consumer);
if (ret)
return ret;
usleep_range(2000, 5000);
ret = regulator_enable(nt->vregs[3].consumer);
if (ret)
goto end;
usleep_range(15000, 18000);
ret = regulator_enable(nt->vregs[1].consumer);
if (ret)
goto end;
ret = regulator_enable(nt->vregs[2].consumer);
if (ret)
goto end;
usleep_range(12000, 13000);
nt35950_reset(nt);
ret = nt35950_on(nt);
if (ret < 0) {
dev_err(dev, "Failed to initialize panel: %d\n", ret);
goto end;
}
end:
if (ret < 0) {
regulator_bulk_disable(ARRAY_SIZE(nt->vregs), nt->vregs);
return ret;
}
return 0;
}
static int nt35950_unprepare(struct drm_panel *panel)
{
struct nt35950 *nt = to_nt35950(panel);
struct device *dev = &nt->dsi[0]->dev;
int ret;
ret = nt35950_off(nt);
if (ret < 0)
dev_err(dev, "Failed to deinitialize panel: %d\n", ret);
gpiod_set_value_cansleep(nt->reset_gpio, 0);
regulator_bulk_disable(ARRAY_SIZE(nt->vregs), nt->vregs);
return 0;
}
static int nt35950_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct nt35950 *nt = to_nt35950(panel);
int i;
for (i = 0; i < nt->desc->num_modes; i++) {
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev,
&nt->desc->mode_data[i].mode);
if (!mode)
return -ENOMEM;
drm_mode_set_name(mode);
mode->type |= DRM_MODE_TYPE_DRIVER;
if (nt->desc->num_modes == 1)
mode->type |= DRM_MODE_TYPE_PREFERRED;
drm_mode_probed_add(connector, mode);
}
connector->display_info.bpc = 8;
connector->display_info.height_mm = nt->desc->mode_data[0].mode.height_mm;
connector->display_info.width_mm = nt->desc->mode_data[0].mode.width_mm;
nt->connector = connector;
return nt->desc->num_modes;
}
static const struct drm_panel_funcs nt35950_panel_funcs = {
.prepare = nt35950_prepare,
.unprepare = nt35950_unprepare,
.get_modes = nt35950_get_modes,
};
static int nt35950_probe(struct mipi_dsi_device *dsi)
{
struct device *dev = &dsi->dev;
struct device_node *dsi_r;
struct mipi_dsi_host *dsi_r_host;
struct nt35950 *nt;
const struct mipi_dsi_device_info *info;
int i, num_dsis = 1, ret;
nt = devm_kzalloc(dev, sizeof(*nt), GFP_KERNEL);
if (!nt)
return -ENOMEM;
ret = nt35950_sharp_init_vregs(nt, dev);
if (ret)
return dev_err_probe(dev, ret, "Regulator init failure.\n");
nt->desc = of_device_get_match_data(dev);
if (!nt->desc)
return -ENODEV;
nt->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS);
if (IS_ERR(nt->reset_gpio)) {
return dev_err_probe(dev, PTR_ERR(nt->reset_gpio),
"Failed to get reset gpio\n");
}
/* If the panel is connected on two DSIs then DSI0 left, DSI1 right */
if (nt->desc->is_dual_dsi) {
info = &nt->desc->dsi_info;
dsi_r = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
if (!dsi_r) {
dev_err(dev, "Cannot get secondary DSI node.\n");
return -ENODEV;
}
dsi_r_host = of_find_mipi_dsi_host_by_node(dsi_r);
of_node_put(dsi_r);
if (!dsi_r_host) {
dev_err(dev, "Cannot get secondary DSI host\n");
return -EPROBE_DEFER;
}
nt->dsi[1] = mipi_dsi_device_register_full(dsi_r_host, info);
if (!nt->dsi[1]) {
dev_err(dev, "Cannot get secondary DSI node\n");
return -ENODEV;
}
num_dsis++;
}
nt->dsi[0] = dsi;
mipi_dsi_set_drvdata(dsi, nt);
drm_panel_init(&nt->panel, dev, &nt35950_panel_funcs,
DRM_MODE_CONNECTOR_DSI);
ret = drm_panel_of_backlight(&nt->panel);
if (ret) {
if (num_dsis == 2)
mipi_dsi_device_unregister(nt->dsi[1]);
return dev_err_probe(dev, ret, "Failed to get backlight\n");
}
drm_panel_add(&nt->panel);
for (i = 0; i < num_dsis; i++) {
nt->dsi[i]->lanes = nt->desc->num_lanes;
nt->dsi[i]->format = MIPI_DSI_FMT_RGB888;
nt->dsi[i]->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS |
MIPI_DSI_MODE_LPM;
if (nt->desc->mode_data[0].is_video_mode)
nt->dsi[i]->mode_flags |= MIPI_DSI_MODE_VIDEO;
ret = mipi_dsi_attach(nt->dsi[i]);
if (ret < 0) {
/* If we fail to attach to either host, we're done */
if (num_dsis == 2)
mipi_dsi_device_unregister(nt->dsi[1]);
return dev_err_probe(dev, ret,
"Cannot attach to DSI%d host.\n", i);
}
}
/* Make sure to set RESX LOW before starting the power-on sequence */
gpiod_set_value_cansleep(nt->reset_gpio, 0);
return 0;
}
static void nt35950_remove(struct mipi_dsi_device *dsi)
{
struct nt35950 *nt = mipi_dsi_get_drvdata(dsi);
int ret;
ret = mipi_dsi_detach(nt->dsi[0]);
if (ret < 0)
dev_err(&dsi->dev,
"Failed to detach from DSI0 host: %d\n", ret);
if (nt->dsi[1]) {
ret = mipi_dsi_detach(nt->dsi[1]);
if (ret < 0)
dev_err(&dsi->dev,
"Failed to detach from DSI1 host: %d\n", ret);
mipi_dsi_device_unregister(nt->dsi[1]);
}
drm_panel_remove(&nt->panel);
}
static const struct nt35950_panel_mode sharp_ls055d1sx04_modes[] = {
{
/* 1920x1080 60Hz no compression */
.mode = {
.clock = 214537,
.hdisplay = 1080,
.hsync_start = 1080 + 400,
.hsync_end = 1080 + 400 + 40,
.htotal = 1080 + 400 + 40 + 300,
.vdisplay = 1920,
.vsync_start = 1920 + 12,
.vsync_end = 1920 + 12 + 2,
.vtotal = 1920 + 12 + 2 + 10,
.width_mm = 68,
.height_mm = 121,
},
.compression = MCS_DATA_COMPRESSION_NONE,
.enable_sram = true,
.is_video_mode = false,
.scaler_on = 1,
.scaler_mode = MCS_SCALEUP_DUPLICATE,
},
/* TODO: Add 2160x3840 60Hz when DSC is supported */
};
static const struct nt35950_panel_desc sharp_ls055d1sx04 = {
.model_name = "Sharp LS055D1SX04",
.dsi_info = {
.type = "LS055D1SX04",
.channel = 0,
.node = NULL,
},
.mode_data = sharp_ls055d1sx04_modes,
.num_modes = ARRAY_SIZE(sharp_ls055d1sx04_modes),
.is_dual_dsi = true,
.num_lanes = 4,
};
static const struct of_device_id nt35950_of_match[] = {
{ .compatible = "sharp,ls055d1sx04", .data = &sharp_ls055d1sx04 },
{ }
};
MODULE_DEVICE_TABLE(of, nt35950_of_match);
static struct mipi_dsi_driver nt35950_driver = {
.probe = nt35950_probe,
.remove = nt35950_remove,
.driver = {
.name = "panel-novatek-nt35950",
.of_match_table = nt35950_of_match,
},
};
module_mipi_dsi_driver(nt35950_driver);
MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>");
MODULE_DESCRIPTION("Novatek NT35950 DriverIC panels driver");
MODULE_LICENSE("GPL v2");