blob: 7905eba93dead1b6be92875edf0685838bb64b0e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) ST-Ericsson SA 2012
*
* Battery temperature driver for AB8500
*
* Author:
* Johan Palsson <johan.palsson@stericsson.com>
* Karl Komierowski <karl.komierowski@stericsson.com>
* Arun R Murthy <arun.murthy@stericsson.com>
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/component.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/completion.h>
#include <linux/workqueue.h>
#include <linux/jiffies.h>
#include <linux/of.h>
#include <linux/mfd/core.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/thermal.h>
#include <linux/iio/consumer.h>
#include <linux/fixp-arith.h>
#include "ab8500-bm.h"
#define BTEMP_THERMAL_LOW_LIMIT -10
#define BTEMP_THERMAL_MED_LIMIT 0
#define BTEMP_THERMAL_HIGH_LIMIT_52 52
#define BTEMP_THERMAL_HIGH_LIMIT_57 57
#define BTEMP_THERMAL_HIGH_LIMIT_62 62
#define BTEMP_BATCTRL_CURR_SRC_7UA 7
#define BTEMP_BATCTRL_CURR_SRC_20UA 20
#define BTEMP_BATCTRL_CURR_SRC_16UA 16
#define BTEMP_BATCTRL_CURR_SRC_18UA 18
#define BTEMP_BATCTRL_CURR_SRC_60UA 60
#define BTEMP_BATCTRL_CURR_SRC_120UA 120
/**
* struct ab8500_btemp_interrupts - ab8500 interrupts
* @name: name of the interrupt
* @isr function pointer to the isr
*/
struct ab8500_btemp_interrupts {
char *name;
irqreturn_t (*isr)(int irq, void *data);
};
struct ab8500_btemp_events {
bool batt_rem;
bool btemp_high;
bool btemp_medhigh;
bool btemp_lowmed;
bool btemp_low;
bool ac_conn;
bool usb_conn;
};
struct ab8500_btemp_ranges {
int btemp_high_limit;
int btemp_med_limit;
int btemp_low_limit;
};
/**
* struct ab8500_btemp - ab8500 BTEMP device information
* @dev: Pointer to the structure device
* @node: List of AB8500 BTEMPs, hence prepared for reentrance
* @curr_source: What current source we use, in uA
* @bat_temp: Dispatched battery temperature in degree Celsius
* @prev_bat_temp Last measured battery temperature in degree Celsius
* @parent: Pointer to the struct ab8500
* @tz: Thermal zone for the battery
* @adc_bat_ctrl: ADC channel for the battery control
* @fg: Pointer to the struct fg
* @bm: Platform specific battery management information
* @btemp_psy: Structure for BTEMP specific battery properties
* @events: Structure for information about events triggered
* @btemp_ranges: Battery temperature range structure
* @btemp_wq: Work queue for measuring the temperature periodically
* @btemp_periodic_work: Work for measuring the temperature periodically
* @initialized: True if battery id read.
*/
struct ab8500_btemp {
struct device *dev;
struct list_head node;
int curr_source;
int bat_temp;
int prev_bat_temp;
struct ab8500 *parent;
struct thermal_zone_device *tz;
struct iio_channel *bat_ctrl;
struct ab8500_fg *fg;
struct ab8500_bm_data *bm;
struct power_supply *btemp_psy;
struct ab8500_btemp_events events;
struct ab8500_btemp_ranges btemp_ranges;
struct workqueue_struct *btemp_wq;
struct delayed_work btemp_periodic_work;
bool initialized;
};
/* BTEMP power supply properties */
static enum power_supply_property ab8500_btemp_props[] = {
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_TEMP,
};
static LIST_HEAD(ab8500_btemp_list);
/**
* ab8500_btemp_batctrl_volt_to_res() - convert batctrl voltage to resistance
* @di: pointer to the ab8500_btemp structure
* @v_batctrl: measured batctrl voltage
* @inst_curr: measured instant current
*
* This function returns the battery resistance that is
* derived from the BATCTRL voltage.
* Returns value in Ohms.
*/
static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
int v_batctrl, int inst_curr)
{
if (is_ab8500_1p1_or_earlier(di->parent)) {
/*
* For ABB cut1.0 and 1.1 BAT_CTRL is internally
* connected to 1.8V through a 450k resistor
*/
return (450000 * (v_batctrl)) / (1800 - v_batctrl);
}
/*
* BAT_CTRL is internally
* connected to 1.8V through a 80k resistor
*/
return (80000 * (v_batctrl)) / (1800 - v_batctrl);
}
/**
* ab8500_btemp_read_batctrl_voltage() - measure batctrl voltage
* @di: pointer to the ab8500_btemp structure
*
* This function returns the voltage on BATCTRL. Returns value in mV.
*/
static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di)
{
int vbtemp, ret;
static int prev;
ret = iio_read_channel_processed(di->bat_ctrl, &vbtemp);
if (ret < 0) {
dev_err(di->dev,
"%s ADC conversion failed, using previous value",
__func__);
return prev;
}
prev = vbtemp;
return vbtemp;
}
/**
* ab8500_btemp_get_batctrl_res() - get battery resistance
* @di: pointer to the ab8500_btemp structure
*
* This function returns the battery pack identification resistance.
* Returns value in Ohms.
*/
static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di)
{
int ret;
int batctrl = 0;
int res;
int inst_curr;
int i;
if (!di->fg)
di->fg = ab8500_fg_get();
if (!di->fg) {
dev_err(di->dev, "No fg found\n");
return -EINVAL;
}
ret = ab8500_fg_inst_curr_start(di->fg);
if (ret) {
dev_err(di->dev, "Failed to start current measurement\n");
return ret;
}
do {
msleep(20);
} while (!ab8500_fg_inst_curr_started(di->fg));
i = 0;
do {
batctrl += ab8500_btemp_read_batctrl_voltage(di);
i++;
msleep(20);
} while (!ab8500_fg_inst_curr_done(di->fg));
batctrl /= i;
ret = ab8500_fg_inst_curr_finalize(di->fg, &inst_curr);
if (ret) {
dev_err(di->dev, "Failed to finalize current measurement\n");
return ret;
}
res = ab8500_btemp_batctrl_volt_to_res(di, batctrl, inst_curr);
dev_dbg(di->dev, "%s batctrl: %d res: %d inst_curr: %d samples: %d\n",
__func__, batctrl, res, inst_curr, i);
return res;
}
/**
* ab8500_btemp_id() - Identify the connected battery
* @di: pointer to the ab8500_btemp structure
*
* This function will try to identify the battery by reading the ID
* resistor. Some brands use a combined ID resistor with a NTC resistor to
* both be able to identify and to read the temperature of it.
*/
static int ab8500_btemp_id(struct ab8500_btemp *di)
{
struct power_supply_battery_info *bi = di->bm->bi;
int res;
di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
res = ab8500_btemp_get_batctrl_res(di);
if (res < 0) {
dev_err(di->dev, "%s get batctrl res failed\n", __func__);
return -ENXIO;
}
if (power_supply_battery_bti_in_range(bi, res)) {
dev_info(di->dev, "Battery detected on BATCTRL (pin C3)"
" resistance %d Ohm = %d Ohm +/- %d%%\n",
res, bi->bti_resistance_ohm,
bi->bti_resistance_tolerance);
} else {
dev_warn(di->dev, "Battery identified as unknown"
", resistance %d Ohm\n", res);
return -ENXIO;
}
return 0;
}
/**
* ab8500_btemp_periodic_work() - Measuring the temperature periodically
* @work: pointer to the work_struct structure
*
* Work function for measuring the temperature periodically
*/
static void ab8500_btemp_periodic_work(struct work_struct *work)
{
int interval;
int bat_temp;
struct ab8500_btemp *di = container_of(work,
struct ab8500_btemp, btemp_periodic_work.work);
/* Assume 25 degrees celsius as start temperature */
static int prev = 25;
int ret;
if (!di->initialized) {
/* Identify the battery */
if (ab8500_btemp_id(di) < 0)
dev_warn(di->dev, "failed to identify the battery\n");
}
/* Failover if a reading is erroneous, use last meausurement */
ret = thermal_zone_get_temp(di->tz, &bat_temp);
if (ret) {
dev_err(di->dev, "error reading temperature\n");
bat_temp = prev;
} else {
/* Convert from millicentigrades to centigrades */
bat_temp /= 1000;
prev = bat_temp;
}
/*
* Filter battery temperature.
* Allow direct updates on temperature only if two samples result in
* same temperature. Else only allow 1 degree change from previous
* reported value in the direction of the new measurement.
*/
if ((bat_temp == di->prev_bat_temp) || !di->initialized) {
if ((di->bat_temp != di->prev_bat_temp) || !di->initialized) {
di->initialized = true;
di->bat_temp = bat_temp;
power_supply_changed(di->btemp_psy);
}
} else if (bat_temp < di->prev_bat_temp) {
di->bat_temp--;
power_supply_changed(di->btemp_psy);
} else if (bat_temp > di->prev_bat_temp) {
di->bat_temp++;
power_supply_changed(di->btemp_psy);
}
di->prev_bat_temp = bat_temp;
if (di->events.ac_conn || di->events.usb_conn)
interval = di->bm->temp_interval_chg;
else
interval = di->bm->temp_interval_nochg;
/* Schedule a new measurement */
queue_delayed_work(di->btemp_wq,
&di->btemp_periodic_work,
round_jiffies(interval * HZ));
}
/**
* ab8500_btemp_batctrlindb_handler() - battery removal detected
* @irq: interrupt number
* @_di: void pointer that has to address of ab8500_btemp
*
* Returns IRQ status(IRQ_HANDLED)
*/
static irqreturn_t ab8500_btemp_batctrlindb_handler(int irq, void *_di)
{
struct ab8500_btemp *di = _di;
dev_err(di->dev, "Battery removal detected!\n");
di->events.batt_rem = true;
power_supply_changed(di->btemp_psy);
return IRQ_HANDLED;
}
/**
* ab8500_btemp_templow_handler() - battery temp lower than 10 degrees
* @irq: interrupt number
* @_di: void pointer that has to address of ab8500_btemp
*
* Returns IRQ status(IRQ_HANDLED)
*/
static irqreturn_t ab8500_btemp_templow_handler(int irq, void *_di)
{
struct ab8500_btemp *di = _di;
if (is_ab8500_3p3_or_earlier(di->parent)) {
dev_dbg(di->dev, "Ignore false btemp low irq"
" for ABB cut 1.0, 1.1, 2.0 and 3.3\n");
} else {
dev_crit(di->dev, "Battery temperature lower than -10deg c\n");
di->events.btemp_low = true;
di->events.btemp_high = false;
di->events.btemp_medhigh = false;
di->events.btemp_lowmed = false;
power_supply_changed(di->btemp_psy);
}
return IRQ_HANDLED;
}
/**
* ab8500_btemp_temphigh_handler() - battery temp higher than max temp
* @irq: interrupt number
* @_di: void pointer that has to address of ab8500_btemp
*
* Returns IRQ status(IRQ_HANDLED)
*/
static irqreturn_t ab8500_btemp_temphigh_handler(int irq, void *_di)
{
struct ab8500_btemp *di = _di;
dev_crit(di->dev, "Battery temperature is higher than MAX temp\n");
di->events.btemp_high = true;
di->events.btemp_medhigh = false;
di->events.btemp_lowmed = false;
di->events.btemp_low = false;
power_supply_changed(di->btemp_psy);
return IRQ_HANDLED;
}
/**
* ab8500_btemp_lowmed_handler() - battery temp between low and medium
* @irq: interrupt number
* @_di: void pointer that has to address of ab8500_btemp
*
* Returns IRQ status(IRQ_HANDLED)
*/
static irqreturn_t ab8500_btemp_lowmed_handler(int irq, void *_di)
{
struct ab8500_btemp *di = _di;
dev_dbg(di->dev, "Battery temperature is between low and medium\n");
di->events.btemp_lowmed = true;
di->events.btemp_medhigh = false;
di->events.btemp_high = false;
di->events.btemp_low = false;
power_supply_changed(di->btemp_psy);
return IRQ_HANDLED;
}
/**
* ab8500_btemp_medhigh_handler() - battery temp between medium and high
* @irq: interrupt number
* @_di: void pointer that has to address of ab8500_btemp
*
* Returns IRQ status(IRQ_HANDLED)
*/
static irqreturn_t ab8500_btemp_medhigh_handler(int irq, void *_di)
{
struct ab8500_btemp *di = _di;
dev_dbg(di->dev, "Battery temperature is between medium and high\n");
di->events.btemp_medhigh = true;
di->events.btemp_lowmed = false;
di->events.btemp_high = false;
di->events.btemp_low = false;
power_supply_changed(di->btemp_psy);
return IRQ_HANDLED;
}
/**
* ab8500_btemp_periodic() - Periodic temperature measurements
* @di: pointer to the ab8500_btemp structure
* @enable: enable or disable periodic temperature measurements
*
* Starts of stops periodic temperature measurements. Periodic measurements
* should only be done when a charger is connected.
*/
static void ab8500_btemp_periodic(struct ab8500_btemp *di,
bool enable)
{
dev_dbg(di->dev, "Enable periodic temperature measurements: %d\n",
enable);
/*
* Make sure a new measurement is done directly by cancelling
* any pending work
*/
cancel_delayed_work_sync(&di->btemp_periodic_work);
if (enable)
queue_delayed_work(di->btemp_wq, &di->btemp_periodic_work, 0);
}
/**
* ab8500_btemp_get_temp() - get battery temperature
* @di: pointer to the ab8500_btemp structure
*
* Returns battery temperature
*/
static int ab8500_btemp_get_temp(struct ab8500_btemp *di)
{
int temp = 0;
/*
* The BTEMP events are not reliabe on AB8500 cut3.3
* and prior versions
*/
if (is_ab8500_3p3_or_earlier(di->parent)) {
temp = di->bat_temp * 10;
} else {
if (di->events.btemp_low) {
if (temp > di->btemp_ranges.btemp_low_limit)
temp = di->btemp_ranges.btemp_low_limit * 10;
else
temp = di->bat_temp * 10;
} else if (di->events.btemp_high) {
if (temp < di->btemp_ranges.btemp_high_limit)
temp = di->btemp_ranges.btemp_high_limit * 10;
else
temp = di->bat_temp * 10;
} else if (di->events.btemp_lowmed) {
if (temp > di->btemp_ranges.btemp_med_limit)
temp = di->btemp_ranges.btemp_med_limit * 10;
else
temp = di->bat_temp * 10;
} else if (di->events.btemp_medhigh) {
if (temp < di->btemp_ranges.btemp_med_limit)
temp = di->btemp_ranges.btemp_med_limit * 10;
else
temp = di->bat_temp * 10;
} else
temp = di->bat_temp * 10;
}
return temp;
}
/**
* ab8500_btemp_get_property() - get the btemp properties
* @psy: pointer to the power_supply structure
* @psp: pointer to the power_supply_property structure
* @val: pointer to the power_supply_propval union
*
* This function gets called when an application tries to get the btemp
* properties by reading the sysfs files.
* online: presence of the battery
* present: presence of the battery
* technology: battery technology
* temp: battery temperature
* Returns error code in case of failure else 0(on success)
*/
static int ab8500_btemp_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct ab8500_btemp *di = power_supply_get_drvdata(psy);
switch (psp) {
case POWER_SUPPLY_PROP_PRESENT:
case POWER_SUPPLY_PROP_ONLINE:
if (di->events.batt_rem)
val->intval = 0;
else
val->intval = 1;
break;
case POWER_SUPPLY_PROP_TEMP:
val->intval = ab8500_btemp_get_temp(di);
break;
default:
return -EINVAL;
}
return 0;
}
static int ab8500_btemp_get_ext_psy_data(struct device *dev, void *data)
{
struct power_supply *psy;
struct power_supply *ext = dev_get_drvdata(dev);
const char **supplicants = (const char **)ext->supplied_to;
struct ab8500_btemp *di;
union power_supply_propval ret;
int j;
psy = (struct power_supply *)data;
di = power_supply_get_drvdata(psy);
/*
* For all psy where the name of your driver
* appears in any supplied_to
*/
j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
if (j < 0)
return 0;
/* Go through all properties for the psy */
for (j = 0; j < ext->desc->num_properties; j++) {
enum power_supply_property prop;
prop = ext->desc->properties[j];
if (power_supply_get_property(ext, prop, &ret))
continue;
switch (prop) {
case POWER_SUPPLY_PROP_PRESENT:
switch (ext->desc->type) {
case POWER_SUPPLY_TYPE_MAINS:
/* AC disconnected */
if (!ret.intval && di->events.ac_conn) {
di->events.ac_conn = false;
}
/* AC connected */
else if (ret.intval && !di->events.ac_conn) {
di->events.ac_conn = true;
if (!di->events.usb_conn)
ab8500_btemp_periodic(di, true);
}
break;
case POWER_SUPPLY_TYPE_USB:
/* USB disconnected */
if (!ret.intval && di->events.usb_conn) {
di->events.usb_conn = false;
}
/* USB connected */
else if (ret.intval && !di->events.usb_conn) {
di->events.usb_conn = true;
if (!di->events.ac_conn)
ab8500_btemp_periodic(di, true);
}
break;
default:
break;
}
break;
default:
break;
}
}
return 0;
}
/**
* ab8500_btemp_external_power_changed() - callback for power supply changes
* @psy: pointer to the structure power_supply
*
* This function is pointing to the function pointer external_power_changed
* of the structure power_supply.
* This function gets executed when there is a change in the external power
* supply to the btemp.
*/
static void ab8500_btemp_external_power_changed(struct power_supply *psy)
{
class_for_each_device(power_supply_class, NULL, psy,
ab8500_btemp_get_ext_psy_data);
}
/* ab8500 btemp driver interrupts and their respective isr */
static struct ab8500_btemp_interrupts ab8500_btemp_irq[] = {
{"BAT_CTRL_INDB", ab8500_btemp_batctrlindb_handler},
{"BTEMP_LOW", ab8500_btemp_templow_handler},
{"BTEMP_HIGH", ab8500_btemp_temphigh_handler},
{"BTEMP_LOW_MEDIUM", ab8500_btemp_lowmed_handler},
{"BTEMP_MEDIUM_HIGH", ab8500_btemp_medhigh_handler},
};
static int __maybe_unused ab8500_btemp_resume(struct device *dev)
{
struct ab8500_btemp *di = dev_get_drvdata(dev);
ab8500_btemp_periodic(di, true);
return 0;
}
static int __maybe_unused ab8500_btemp_suspend(struct device *dev)
{
struct ab8500_btemp *di = dev_get_drvdata(dev);
ab8500_btemp_periodic(di, false);
return 0;
}
static char *supply_interface[] = {
"ab8500_chargalg",
"ab8500_fg",
};
static const struct power_supply_desc ab8500_btemp_desc = {
.name = "ab8500_btemp",
.type = POWER_SUPPLY_TYPE_UNKNOWN,
.properties = ab8500_btemp_props,
.num_properties = ARRAY_SIZE(ab8500_btemp_props),
.get_property = ab8500_btemp_get_property,
.external_power_changed = ab8500_btemp_external_power_changed,
};
static int ab8500_btemp_bind(struct device *dev, struct device *master,
void *data)
{
struct ab8500_btemp *di = dev_get_drvdata(dev);
/* Create a work queue for the btemp */
di->btemp_wq =
alloc_workqueue("ab8500_btemp_wq", WQ_MEM_RECLAIM, 0);
if (di->btemp_wq == NULL) {
dev_err(dev, "failed to create work queue\n");
return -ENOMEM;
}
/* Kick off periodic temperature measurements */
ab8500_btemp_periodic(di, true);
return 0;
}
static void ab8500_btemp_unbind(struct device *dev, struct device *master,
void *data)
{
struct ab8500_btemp *di = dev_get_drvdata(dev);
/* Delete the work queue */
destroy_workqueue(di->btemp_wq);
}
static const struct component_ops ab8500_btemp_component_ops = {
.bind = ab8500_btemp_bind,
.unbind = ab8500_btemp_unbind,
};
static int ab8500_btemp_probe(struct platform_device *pdev)
{
struct power_supply_config psy_cfg = {};
struct device *dev = &pdev->dev;
struct ab8500_btemp *di;
int irq, i, ret = 0;
u8 val;
di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
if (!di)
return -ENOMEM;
di->bm = &ab8500_bm_data;
/* get parent data */
di->dev = dev;
di->parent = dev_get_drvdata(pdev->dev.parent);
/* Get thermal zone and ADC */
di->tz = thermal_zone_get_zone_by_name("battery-thermal");
if (IS_ERR(di->tz)) {
ret = PTR_ERR(di->tz);
/*
* This usually just means we are probing before the thermal
* zone, so just defer.
*/
if (ret == -ENODEV)
ret = -EPROBE_DEFER;
return dev_err_probe(dev, ret,
"failed to get battery thermal zone\n");
}
di->bat_ctrl = devm_iio_channel_get(dev, "bat_ctrl");
if (IS_ERR(di->bat_ctrl)) {
ret = dev_err_probe(dev, PTR_ERR(di->bat_ctrl),
"failed to get BAT CTRL ADC channel\n");
return ret;
}
di->initialized = false;
psy_cfg.supplied_to = supply_interface;
psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
psy_cfg.drv_data = di;
/* Init work for measuring temperature periodically */
INIT_DEFERRABLE_WORK(&di->btemp_periodic_work,
ab8500_btemp_periodic_work);
/* Set BTEMP thermal limits. Low and Med are fixed */
di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT;
di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT;
ret = abx500_get_register_interruptible(dev, AB8500_CHARGER,
AB8500_BTEMP_HIGH_TH, &val);
if (ret < 0) {
dev_err(dev, "%s ab8500 read failed\n", __func__);
return ret;
}
switch (val) {
case BTEMP_HIGH_TH_57_0:
case BTEMP_HIGH_TH_57_1:
di->btemp_ranges.btemp_high_limit =
BTEMP_THERMAL_HIGH_LIMIT_57;
break;
case BTEMP_HIGH_TH_52:
di->btemp_ranges.btemp_high_limit =
BTEMP_THERMAL_HIGH_LIMIT_52;
break;
case BTEMP_HIGH_TH_62:
di->btemp_ranges.btemp_high_limit =
BTEMP_THERMAL_HIGH_LIMIT_62;
break;
}
/* Register BTEMP power supply class */
di->btemp_psy = devm_power_supply_register(dev, &ab8500_btemp_desc,
&psy_cfg);
if (IS_ERR(di->btemp_psy)) {
dev_err(dev, "failed to register BTEMP psy\n");
return PTR_ERR(di->btemp_psy);
}
/* Register interrupts */
for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
if (irq < 0)
return irq;
ret = devm_request_threaded_irq(dev, irq, NULL,
ab8500_btemp_irq[i].isr,
IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
ab8500_btemp_irq[i].name, di);
if (ret) {
dev_err(dev, "failed to request %s IRQ %d: %d\n"
, ab8500_btemp_irq[i].name, irq, ret);
return ret;
}
dev_dbg(dev, "Requested %s IRQ %d: %d\n",
ab8500_btemp_irq[i].name, irq, ret);
}
platform_set_drvdata(pdev, di);
list_add_tail(&di->node, &ab8500_btemp_list);
return component_add(dev, &ab8500_btemp_component_ops);
}
static void ab8500_btemp_remove(struct platform_device *pdev)
{
component_del(&pdev->dev, &ab8500_btemp_component_ops);
}
static SIMPLE_DEV_PM_OPS(ab8500_btemp_pm_ops, ab8500_btemp_suspend, ab8500_btemp_resume);
static const struct of_device_id ab8500_btemp_match[] = {
{ .compatible = "stericsson,ab8500-btemp", },
{ },
};
MODULE_DEVICE_TABLE(of, ab8500_btemp_match);
struct platform_driver ab8500_btemp_driver = {
.probe = ab8500_btemp_probe,
.remove_new = ab8500_btemp_remove,
.driver = {
.name = "ab8500-btemp",
.of_match_table = ab8500_btemp_match,
.pm = &ab8500_btemp_pm_ops,
},
};
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
MODULE_ALIAS("platform:ab8500-btemp");
MODULE_DESCRIPTION("AB8500 battery temperature driver");