| // SPDX-License-Identifier: GPL-2.0+ |
| |
| /* |
| * Copyright 2018 IBM Corporation. |
| */ |
| |
| #define __SANE_USERSPACE_TYPES__ |
| |
| #include <sys/types.h> |
| #include <stdint.h> |
| #include <malloc.h> |
| #include <unistd.h> |
| #include <signal.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <stdio.h> |
| #include "utils.h" |
| #include "flush_utils.h" |
| |
| int entry_flush_test(void) |
| { |
| char *p; |
| int repetitions = 10; |
| int fd, passes = 0, iter, rc = 0; |
| struct perf_event_read v; |
| __u64 l1d_misses_total = 0; |
| unsigned long iterations = 100000, zero_size = 24 * 1024; |
| unsigned long l1d_misses_expected; |
| int rfi_flush_orig; |
| int entry_flush, entry_flush_orig; |
| |
| SKIP_IF(geteuid() != 0); |
| |
| // The PMU event we use only works on Power7 or later |
| SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06)); |
| |
| if (read_debugfs_int("powerpc/rfi_flush", &rfi_flush_orig) < 0) { |
| perror("Unable to read powerpc/rfi_flush debugfs file"); |
| SKIP_IF(1); |
| } |
| |
| if (read_debugfs_int("powerpc/entry_flush", &entry_flush_orig) < 0) { |
| perror("Unable to read powerpc/entry_flush debugfs file"); |
| SKIP_IF(1); |
| } |
| |
| if (rfi_flush_orig != 0) { |
| if (write_debugfs_int("powerpc/rfi_flush", 0) < 0) { |
| perror("error writing to powerpc/rfi_flush debugfs file"); |
| FAIL_IF(1); |
| } |
| } |
| |
| entry_flush = entry_flush_orig; |
| |
| fd = perf_event_open_counter(PERF_TYPE_HW_CACHE, PERF_L1D_READ_MISS_CONFIG, -1); |
| FAIL_IF(fd < 0); |
| |
| p = (char *)memalign(zero_size, CACHELINE_SIZE); |
| |
| FAIL_IF(perf_event_enable(fd)); |
| |
| // disable L1 prefetching |
| set_dscr(1); |
| |
| iter = repetitions; |
| |
| /* |
| * We expect to see l1d miss for each cacheline access when entry_flush |
| * is set. Allow a small variation on this. |
| */ |
| l1d_misses_expected = iterations * (zero_size / CACHELINE_SIZE - 2); |
| |
| again: |
| FAIL_IF(perf_event_reset(fd)); |
| |
| syscall_loop(p, iterations, zero_size); |
| |
| FAIL_IF(read(fd, &v, sizeof(v)) != sizeof(v)); |
| |
| if (entry_flush && v.l1d_misses >= l1d_misses_expected) |
| passes++; |
| else if (!entry_flush && v.l1d_misses < (l1d_misses_expected / 2)) |
| passes++; |
| |
| l1d_misses_total += v.l1d_misses; |
| |
| while (--iter) |
| goto again; |
| |
| if (passes < repetitions) { |
| printf("FAIL (L1D misses with entry_flush=%d: %llu %c %lu) [%d/%d failures]\n", |
| entry_flush, l1d_misses_total, entry_flush ? '<' : '>', |
| entry_flush ? repetitions * l1d_misses_expected : |
| repetitions * l1d_misses_expected / 2, |
| repetitions - passes, repetitions); |
| rc = 1; |
| } else { |
| printf("PASS (L1D misses with entry_flush=%d: %llu %c %lu) [%d/%d pass]\n", |
| entry_flush, l1d_misses_total, entry_flush ? '>' : '<', |
| entry_flush ? repetitions * l1d_misses_expected : |
| repetitions * l1d_misses_expected / 2, |
| passes, repetitions); |
| } |
| |
| if (entry_flush == entry_flush_orig) { |
| entry_flush = !entry_flush_orig; |
| if (write_debugfs_int("powerpc/entry_flush", entry_flush) < 0) { |
| perror("error writing to powerpc/entry_flush debugfs file"); |
| return 1; |
| } |
| iter = repetitions; |
| l1d_misses_total = 0; |
| passes = 0; |
| goto again; |
| } |
| |
| perf_event_disable(fd); |
| close(fd); |
| |
| set_dscr(0); |
| |
| if (write_debugfs_int("powerpc/rfi_flush", rfi_flush_orig) < 0) { |
| perror("unable to restore original value of powerpc/rfi_flush debugfs file"); |
| return 1; |
| } |
| |
| if (write_debugfs_int("powerpc/entry_flush", entry_flush_orig) < 0) { |
| perror("unable to restore original value of powerpc/entry_flush debugfs file"); |
| return 1; |
| } |
| |
| return rc; |
| } |
| |
| int main(int argc, char *argv[]) |
| { |
| return test_harness(entry_flush_test, "entry_flush_test"); |
| } |