| // SPDX-License-Identifier: GPL-2.0 |
| #include "juno-clocks.dtsi" |
| #include "juno-motherboard.dtsi" |
| |
| / { |
| /* |
| * Devices shared by all Juno boards |
| */ |
| |
| memtimer: timer@2a810000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x0 0x2a810000 0x0 0x10000>; |
| clock-frequency = <50000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x0 0x2a820000 0x20000>; |
| status = "disabled"; |
| frame@2a830000 { |
| frame-number = <1>; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x10000 0x10000>; |
| }; |
| }; |
| |
| mailbox: mhu@2b1f0000 { |
| compatible = "arm,mhu", "arm,primecell"; |
| reg = <0x0 0x2b1f0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "mhu_lpri_rx", |
| "mhu_hpri_rx"; |
| #mbox-cells = <1>; |
| clocks = <&soc_refclk100mhz>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| smmu_gpu: iommu@2b400000 { |
| compatible = "arm,mmu-400", "arm,smmu-v1"; |
| reg = <0x0 0x2b400000 0x0 0x10000>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| #iommu-cells = <1>; |
| #global-interrupts = <1>; |
| power-domains = <&scpi_devpd 1>; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| smmu_pcie: iommu@2b500000 { |
| compatible = "arm,mmu-401", "arm,smmu-v1"; |
| reg = <0x0 0x2b500000 0x0 0x10000>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| #iommu-cells = <1>; |
| #global-interrupts = <1>; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| smmu_etr: iommu@2b600000 { |
| compatible = "arm,mmu-401", "arm,smmu-v1"; |
| reg = <0x0 0x2b600000 0x0 0x10000>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| #iommu-cells = <1>; |
| #global-interrupts = <1>; |
| dma-coherent; |
| power-domains = <&scpi_devpd 0>; |
| }; |
| |
| gic: interrupt-controller@2c010000 { |
| compatible = "arm,gic-400", "arm,cortex-a15-gic"; |
| reg = <0x0 0x2c010000 0 0x1000>, |
| <0x0 0x2c02f000 0 0x2000>, |
| <0x0 0x2c04f000 0 0x2000>, |
| <0x0 0x2c06f000 0 0x2000>; |
| #address-cells = <1>; |
| #interrupt-cells = <3>; |
| #size-cells = <1>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; |
| ranges = <0 0 0x2c1c0000 0x40000>; |
| |
| v2m_0: v2m@0 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0 0x10000>; |
| }; |
| |
| v2m@10000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x10000 0x10000>; |
| }; |
| |
| v2m@20000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x20000 0x10000>; |
| }; |
| |
| v2m@30000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x30000 0x10000>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| /* |
| * Juno TRMs specify the size for these coresight components as 64K. |
| * The actual size is just 4K though 64K is reserved. Access to the |
| * unmapped reserved region results in a DECERR response. |
| */ |
| etf@20010000 { /* etf0 */ |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0 0x20010000 0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| |
| in-ports { |
| port { |
| etf0_in_port: endpoint { |
| remote-endpoint = <&main_funnel_out_port>; |
| }; |
| }; |
| }; |
| |
| out-ports { |
| port { |
| etf0_out_port: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| tpiu@20030000 { |
| compatible = "arm,coresight-tpiu", "arm,primecell"; |
| reg = <0 0x20030000 0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| in-ports { |
| port { |
| tpiu_in_port: endpoint { |
| remote-endpoint = <&replicator_out_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| /* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/ |
| main_funnel: funnel@20040000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0x20040000 0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| |
| out-ports { |
| port { |
| main_funnel_out_port: endpoint { |
| remote-endpoint = <&etf0_in_port>; |
| }; |
| }; |
| }; |
| |
| main_funnel_in_ports: in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| main_funnel_in_port0: endpoint { |
| remote-endpoint = <&cluster0_funnel_out_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| main_funnel_in_port1: endpoint { |
| remote-endpoint = <&cluster1_funnel_out_port>; |
| }; |
| }; |
| }; |
| }; |
| |
| etr@20070000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0 0x20070000 0 0x1000>; |
| iommus = <&smmu_etr 0>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| arm,scatter-gather; |
| in-ports { |
| port { |
| etr_in_port: endpoint { |
| remote-endpoint = <&replicator_out_port1>; |
| }; |
| }; |
| }; |
| }; |
| |
| stm@20100000 { |
| compatible = "arm,coresight-stm", "arm,primecell"; |
| reg = <0 0x20100000 0 0x1000>, |
| <0 0x28000000 0 0x1000000>; |
| reg-names = "stm-base", "stm-stimulus-base"; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| out-ports { |
| port { |
| stm_out_port: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| replicator@20120000 { |
| compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| reg = <0 0x20120000 0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| |
| out-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* replicator output ports */ |
| port@0 { |
| reg = <0>; |
| replicator_out_port0: endpoint { |
| remote-endpoint = <&tpiu_in_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| replicator_out_port1: endpoint { |
| remote-endpoint = <&etr_in_port>; |
| }; |
| }; |
| }; |
| in-ports { |
| port { |
| replicator_in_port0: endpoint { |
| }; |
| }; |
| }; |
| }; |
| |
| cpu_debug0: cpu-debug@22010000 { |
| compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| reg = <0x0 0x22010000 0x0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| }; |
| |
| etm0: etm@22040000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x22040000 0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| out-ports { |
| port { |
| cluster0_etm0_out_port: endpoint { |
| remote-endpoint = <&cluster0_funnel_in_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@220c0000 { /* cluster0 funnel */ |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0x220c0000 0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| out-ports { |
| port { |
| cluster0_funnel_out_port: endpoint { |
| remote-endpoint = <&main_funnel_in_port0>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| cluster0_funnel_in_port0: endpoint { |
| remote-endpoint = <&cluster0_etm0_out_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| cluster0_funnel_in_port1: endpoint { |
| remote-endpoint = <&cluster0_etm1_out_port>; |
| }; |
| }; |
| }; |
| }; |
| |
| cpu_debug1: cpu-debug@22110000 { |
| compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| reg = <0x0 0x22110000 0x0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| }; |
| |
| etm1: etm@22140000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x22140000 0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| out-ports { |
| port { |
| cluster0_etm1_out_port: endpoint { |
| remote-endpoint = <&cluster0_funnel_in_port1>; |
| }; |
| }; |
| }; |
| }; |
| |
| cpu_debug2: cpu-debug@23010000 { |
| compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| reg = <0x0 0x23010000 0x0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| }; |
| |
| etm2: etm@23040000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x23040000 0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| out-ports { |
| port { |
| cluster1_etm0_out_port: endpoint { |
| remote-endpoint = <&cluster1_funnel_in_port0>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel@230c0000 { /* cluster1 funnel */ |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0 0x230c0000 0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| out-ports { |
| port { |
| cluster1_funnel_out_port: endpoint { |
| remote-endpoint = <&main_funnel_in_port1>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| cluster1_funnel_in_port0: endpoint { |
| remote-endpoint = <&cluster1_etm0_out_port>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| cluster1_funnel_in_port1: endpoint { |
| remote-endpoint = <&cluster1_etm1_out_port>; |
| }; |
| }; |
| port@2 { |
| reg = <2>; |
| cluster1_funnel_in_port2: endpoint { |
| remote-endpoint = <&cluster1_etm2_out_port>; |
| }; |
| }; |
| port@3 { |
| reg = <3>; |
| cluster1_funnel_in_port3: endpoint { |
| remote-endpoint = <&cluster1_etm3_out_port>; |
| }; |
| }; |
| }; |
| }; |
| |
| cpu_debug3: cpu-debug@23110000 { |
| compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| reg = <0x0 0x23110000 0x0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| }; |
| |
| etm3: etm@23140000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x23140000 0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| out-ports { |
| port { |
| cluster1_etm1_out_port: endpoint { |
| remote-endpoint = <&cluster1_funnel_in_port1>; |
| }; |
| }; |
| }; |
| }; |
| |
| cpu_debug4: cpu-debug@23210000 { |
| compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| reg = <0x0 0x23210000 0x0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| }; |
| |
| etm4: etm@23240000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x23240000 0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| out-ports { |
| port { |
| cluster1_etm2_out_port: endpoint { |
| remote-endpoint = <&cluster1_funnel_in_port2>; |
| }; |
| }; |
| }; |
| }; |
| |
| cpu_debug5: cpu-debug@23310000 { |
| compatible = "arm,coresight-cpu-debug", "arm,primecell"; |
| reg = <0x0 0x23310000 0x0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| }; |
| |
| etm5: etm@23340000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0 0x23340000 0 0x1000>; |
| |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| power-domains = <&scpi_devpd 0>; |
| out-ports { |
| port { |
| cluster1_etm3_out_port: endpoint { |
| remote-endpoint = <&cluster1_funnel_in_port3>; |
| }; |
| }; |
| }; |
| }; |
| |
| gpu: gpu@2d000000 { |
| compatible = "arm,juno-mali", "arm,mali-t624"; |
| reg = <0 0x2d000000 0 0x10000>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "job", "mmu", "gpu"; |
| clocks = <&scpi_dvfs 2>; |
| power-domains = <&scpi_devpd 1>; |
| dma-coherent; |
| /* The SMMU is only really of interest to bare-metal hypervisors */ |
| /* iommus = <&smmu_gpu 0>; */ |
| status = "disabled"; |
| }; |
| |
| sram: sram@2e000000 { |
| compatible = "arm,juno-sram-ns", "mmio-sram"; |
| reg = <0x0 0x2e000000 0x0 0x8000>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x0 0x2e000000 0x8000>; |
| |
| cpu_scp_lpri: scp-sram@0 { |
| compatible = "arm,juno-scp-shmem"; |
| reg = <0x0 0x200>; |
| }; |
| |
| cpu_scp_hpri: scp-sram@200 { |
| compatible = "arm,juno-scp-shmem"; |
| reg = <0x200 0x200>; |
| }; |
| }; |
| |
| pcie_ctlr: pcie@40000000 { |
| compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; |
| device_type = "pci"; |
| reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ |
| bus-range = <0 255>; |
| linux,pci-domain = <0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| dma-coherent; |
| ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 0x00800000>, |
| <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, |
| <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; |
| /* Standard AXI Translation entries as programmed by EDK2 */ |
| dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 0x00040000>, |
| <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>, |
| <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &gic 0 GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &gic 0 GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &gic 0 GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; |
| msi-parent = <&v2m_0>; |
| status = "disabled"; |
| iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */ |
| iommu-map = <0x0 &smmu_pcie 0x0 0x1>; |
| }; |
| |
| scpi { |
| compatible = "arm,scpi"; |
| mboxes = <&mailbox 1>; |
| shmem = <&cpu_scp_hpri>; |
| |
| clocks { |
| compatible = "arm,scpi-clocks"; |
| |
| scpi_dvfs: clocks-0 { |
| compatible = "arm,scpi-dvfs-clocks"; |
| #clock-cells = <1>; |
| clock-indices = <0>, <1>, <2>; |
| clock-output-names = "atlclk", "aplclk","gpuclk"; |
| }; |
| scpi_clk: clocks-1 { |
| compatible = "arm,scpi-variable-clocks"; |
| #clock-cells = <1>; |
| clock-indices = <3>; |
| clock-output-names = "pxlclk"; |
| }; |
| }; |
| |
| scpi_devpd: power-controller { |
| compatible = "arm,scpi-power-domains"; |
| num-domains = <2>; |
| #power-domain-cells = <1>; |
| }; |
| |
| scpi_sensors0: sensors { |
| compatible = "arm,scpi-sensors"; |
| #thermal-sensor-cells = <1>; |
| }; |
| }; |
| |
| thermal-zones { |
| pmic { |
| polling-delay = <1000>; |
| polling-delay-passive = <100>; |
| thermal-sensors = <&scpi_sensors0 0>; |
| }; |
| |
| soc { |
| polling-delay = <1000>; |
| polling-delay-passive = <100>; |
| thermal-sensors = <&scpi_sensors0 3>; |
| }; |
| |
| big_cluster_thermal_zone: big-cluster { |
| polling-delay = <1000>; |
| polling-delay-passive = <100>; |
| thermal-sensors = <&scpi_sensors0 21>; |
| status = "disabled"; |
| }; |
| |
| little_cluster_thermal_zone: little-cluster { |
| polling-delay = <1000>; |
| polling-delay-passive = <100>; |
| thermal-sensors = <&scpi_sensors0 22>; |
| status = "disabled"; |
| }; |
| |
| gpu0_thermal_zone: gpu0 { |
| polling-delay = <1000>; |
| polling-delay-passive = <100>; |
| thermal-sensors = <&scpi_sensors0 23>; |
| status = "disabled"; |
| }; |
| |
| gpu1_thermal_zone: gpu1 { |
| polling-delay = <1000>; |
| polling-delay-passive = <100>; |
| thermal-sensors = <&scpi_sensors0 24>; |
| status = "disabled"; |
| }; |
| }; |
| |
| smmu_dma: iommu@7fb00000 { |
| compatible = "arm,mmu-401", "arm,smmu-v1"; |
| reg = <0x0 0x7fb00000 0x0 0x10000>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| #iommu-cells = <1>; |
| #global-interrupts = <1>; |
| dma-coherent; |
| }; |
| |
| smmu_hdlcd1: iommu@7fb10000 { |
| compatible = "arm,mmu-401", "arm,smmu-v1"; |
| reg = <0x0 0x7fb10000 0x0 0x10000>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| #iommu-cells = <1>; |
| #global-interrupts = <1>; |
| }; |
| |
| smmu_hdlcd0: iommu@7fb20000 { |
| compatible = "arm,mmu-401", "arm,smmu-v1"; |
| reg = <0x0 0x7fb20000 0x0 0x10000>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| #iommu-cells = <1>; |
| #global-interrupts = <1>; |
| }; |
| |
| smmu_usb: iommu@7fb30000 { |
| compatible = "arm,mmu-401", "arm,smmu-v1"; |
| reg = <0x0 0x7fb30000 0x0 0x10000>; |
| interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| #iommu-cells = <1>; |
| #global-interrupts = <1>; |
| dma-coherent; |
| }; |
| |
| dma@7ff00000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x0 0x7ff00000 0 0x1000>; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&smmu_dma 0>, |
| <&smmu_dma 1>, |
| <&smmu_dma 2>, |
| <&smmu_dma 3>, |
| <&smmu_dma 4>, |
| <&smmu_dma 5>, |
| <&smmu_dma 6>, |
| <&smmu_dma 7>, |
| <&smmu_dma 8>; |
| clocks = <&soc_faxiclk>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| hdlcd@7ff50000 { |
| compatible = "arm,hdlcd"; |
| reg = <0 0x7ff50000 0 0x1000>; |
| interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&smmu_hdlcd1 0>; |
| clocks = <&scpi_clk 3>; |
| clock-names = "pxlclk"; |
| |
| port { |
| hdlcd1_output: endpoint { |
| remote-endpoint = <&tda998x_1_input>; |
| }; |
| }; |
| }; |
| |
| hdlcd@7ff60000 { |
| compatible = "arm,hdlcd"; |
| reg = <0 0x7ff60000 0 0x1000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&smmu_hdlcd0 0>; |
| clocks = <&scpi_clk 3>; |
| clock-names = "pxlclk"; |
| |
| port { |
| hdlcd0_output: endpoint { |
| remote-endpoint = <&tda998x_0_input>; |
| }; |
| }; |
| }; |
| |
| soc_uart0: serial@7ff80000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0x7ff80000 0x0 0x1000>; |
| interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_uartclk>, <&soc_refclk100mhz>; |
| clock-names = "uartclk", "apb_pclk"; |
| }; |
| |
| i2c@7ffa0000 { |
| compatible = "snps,designware-i2c"; |
| reg = <0x0 0x7ffa0000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <400000>; |
| i2c-sda-hold-time-ns = <500>; |
| clocks = <&soc_smc50mhz>; |
| |
| hdmi-transmitter@70 { |
| compatible = "nxp,tda998x"; |
| reg = <0x70>; |
| port { |
| tda998x_0_input: endpoint { |
| remote-endpoint = <&hdlcd0_output>; |
| }; |
| }; |
| }; |
| |
| hdmi-transmitter@71 { |
| compatible = "nxp,tda998x"; |
| reg = <0x71>; |
| port { |
| tda998x_1_input: endpoint { |
| remote-endpoint = <&hdlcd1_output>; |
| }; |
| }; |
| }; |
| }; |
| |
| usb@7ffb0000 { |
| compatible = "generic-ohci"; |
| reg = <0x0 0x7ffb0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&smmu_usb 0>; |
| clocks = <&soc_usb48mhz>; |
| }; |
| |
| usb@7ffc0000 { |
| compatible = "generic-ehci"; |
| reg = <0x0 0x7ffc0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&smmu_usb 0>; |
| clocks = <&soc_usb48mhz>; |
| }; |
| |
| memory-controller@7ffd0000 { |
| compatible = "arm,pl354", "arm,primecell"; |
| reg = <0 0x7ffd0000 0 0x1000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&soc_smc50mhz>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| /* last 16MB of the first memory area is reserved for secure world use by firmware */ |
| reg = <0x00000000 0x80000000 0x0 0x7f000000>, |
| <0x00000008 0x80000000 0x1 0x80000000>; |
| }; |
| |
| bus@8000000 { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0x08000000 0x04000000>, |
| <1 0 0 0x14000000 0x04000000>, |
| <2 0 0 0x18000000 0x04000000>, |
| <3 0 0 0x1c000000 0x04000000>, |
| <4 0 0 0x0c000000 0x04000000>, |
| <5 0 0 0x10000000 0x04000000>; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 15>; |
| interrupt-map = <0 0 0 &gic 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 1 &gic 0 GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 2 &gic 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 3 &gic 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 4 &gic 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 5 &gic 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 6 &gic 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 7 &gic 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 8 &gic 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 9 &gic 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 10 &gic 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| site2: tlx-bus@60000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0x60000000 0x10000000>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0>; |
| interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |