| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC |
| * |
| * Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries |
| * |
| * Author: Eugen Hristev <eugen.hristev@microchip.com> |
| * Author: Claudiu Beznea <claudiu.beznea@microchip.com> |
| * |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/at91.h> |
| #include <dt-bindings/dma/at91.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Microchip SAMA7G5 family SoC"; |
| compatible = "microchip,sama7g5"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&gic>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x0>; |
| }; |
| }; |
| |
| clocks { |
| slow_xtal: slow_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| main_xtal: main_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| }; |
| |
| usb_clk: usb_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <48000000>; |
| }; |
| }; |
| |
| vddout25: fixed-regulator-vddout25 { |
| compatible = "regulator-fixed"; |
| |
| regulator-name = "VDDOUT25"; |
| regulator-min-microvolt = <2500000>; |
| regulator-max-microvolt = <2500000>; |
| regulator-boot-on; |
| status = "disabled"; |
| }; |
| |
| ns_sram: sram@100000 { |
| compatible = "mmio-sram"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x100000 0x20000>; |
| ranges; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| securam: securam@e0000000 { |
| compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram"; |
| reg = <0xe0000000 0x4000>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0xe0000000 0x4000>; |
| no-memory-wc; |
| status = "okay"; |
| }; |
| |
| secumod: secumod@e0004000 { |
| compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon"; |
| reg = <0xe0004000 0x4000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| sfrbu: sfr@e0008000 { |
| compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon"; |
| reg = <0xe0008000 0x20>; |
| }; |
| |
| pioA: pinctrl@e0014000 { |
| compatible = "microchip,sama7g5-pinctrl"; |
| reg = <0xe0014000 0x800>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; |
| }; |
| |
| pmc: pmc@e0018000 { |
| compatible = "microchip,sama7g5-pmc", "syscon"; |
| reg = <0xe0018000 0x200>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| #clock-cells = <2>; |
| clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; |
| clock-names = "td_slck", "md_slck", "main_xtal"; |
| }; |
| |
| shdwc: shdwc@e001d010 { |
| compatible = "microchip,sama7g5-shdwc", "syscon"; |
| reg = <0xe001d010 0x10>; |
| clocks = <&clk32k 0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| atmel,wakeup-rtc-timer; |
| atmel,wakeup-rtt-timer; |
| status = "disabled"; |
| }; |
| |
| rtt: rtt@e001d020 { |
| compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; |
| reg = <0xe001d020 0x30>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk32k 0>; |
| }; |
| |
| clk32k: clock-controller@e001d050 { |
| compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc"; |
| reg = <0xe001d050 0x4>; |
| clocks = <&slow_xtal>; |
| #clock-cells = <1>; |
| }; |
| |
| gpbr: gpbr@e001d060 { |
| compatible = "microchip,sama7g5-gpbr", "syscon"; |
| reg = <0xe001d060 0x48>; |
| }; |
| |
| rtc: rtc@e001d0a8 { |
| compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc"; |
| reg = <0xe001d0a8 0x30>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk32k 1>; |
| }; |
| |
| ps_wdt: watchdog@e001d180 { |
| compatible = "microchip,sama7g5-wdt"; |
| reg = <0xe001d180 0x24>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk32k 0>; |
| }; |
| |
| chipid@e0020000 { |
| compatible = "microchip,sama7g5-chipid"; |
| reg = <0xe0020000 0x8>; |
| }; |
| |
| tcb1: timer@e0800000 { |
| compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xe0800000 0x100>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>; |
| clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; |
| }; |
| |
| adc: adc@e1000000 { |
| compatible = "microchip,sama7g5-adc"; |
| reg = <0xe1000000 0x200>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_GCK 26>; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 26>; |
| assigned-clock-rates = <100000000>; |
| clock-names = "adc_clk"; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>; |
| dma-names = "rx"; |
| atmel,min-sample-rate-hz = <200000>; |
| atmel,max-sample-rate-hz = <20000000>; |
| atmel,startup-time-ms = <4>; |
| status = "disabled"; |
| }; |
| |
| sdmmc0: mmc@e1204000 { |
| compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; |
| reg = <0xe1204000 0x4000>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>; |
| clock-names = "hclock", "multclk"; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 80>; |
| assigned-clock-rates = <200000000>; |
| microchip,sdcal-inverted; |
| status = "disabled"; |
| }; |
| |
| sdmmc1: mmc@e1208000 { |
| compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; |
| reg = <0xe1208000 0x4000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>; |
| clock-names = "hclock", "multclk"; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 81>; |
| assigned-clock-rates = <200000000>; |
| microchip,sdcal-inverted; |
| status = "disabled"; |
| }; |
| |
| sdmmc2: mmc@e120c000 { |
| compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; |
| reg = <0xe120c000 0x4000>; |
| interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>; |
| clock-names = "hclock", "multclk"; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 82>; |
| assigned-clock-rates = <200000000>; |
| microchip,sdcal-inverted; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@e1604000 { |
| compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm"; |
| reg = <0xe1604000 0x4000>; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| #pwm-cells = <3>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 77>; |
| status = "disabled"; |
| }; |
| |
| spdifrx: spdifrx@e1614000 { |
| #sound-dai-cells = <0>; |
| compatible = "microchip,sama7g5-spdifrx"; |
| reg = <0xe1614000 0x4000>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>; |
| dma-names = "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>; |
| clock-names = "pclk", "gclk"; |
| status = "disabled"; |
| }; |
| |
| spdiftx: spdiftx@e1618000 { |
| #sound-dai-cells = <0>; |
| compatible = "microchip,sama7g5-spdiftx"; |
| reg = <0xe1618000 0x4000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>; |
| dma-names = "tx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>; |
| clock-names = "pclk", "gclk"; |
| }; |
| |
| i2s0: i2s@e161c000 { |
| compatible = "microchip,sama7g5-i2smcc"; |
| #sound-dai-cells = <0>; |
| reg = <0xe161c000 0x4000>; |
| interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>; |
| clock-names = "pclk", "gclk"; |
| status = "disabled"; |
| }; |
| |
| i2s1: i2s@e1620000 { |
| compatible = "microchip,sama7g5-i2smcc"; |
| #sound-dai-cells = <0>; |
| reg = <0xe1620000 0x4000>; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>; |
| clock-names = "pclk", "gclk"; |
| status = "disabled"; |
| }; |
| |
| pit64b0: timer@e1800000 { |
| compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b"; |
| reg = <0xe1800000 0x4000>; |
| interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>; |
| clock-names = "pclk", "gclk"; |
| }; |
| |
| pit64b1: timer@e1804000 { |
| compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b"; |
| reg = <0xe1804000 0x4000>; |
| interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>; |
| clock-names = "pclk", "gclk"; |
| }; |
| |
| flx0: flexcom@e1818000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe1818000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe1818000 0x800>; |
| status = "disabled"; |
| |
| uart0: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; |
| clock-names = "usart"; |
| dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>, |
| <&dma1 AT91_XDMAC_DT_PERID(5)>; |
| dma-names = "tx", "rx"; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx1: flexcom@e181c000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe181c000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe181c000 0x800>; |
| status = "disabled"; |
| |
| i2c1: i2c@600 { |
| compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; |
| atmel,fifo-size = <32>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, |
| <&dma0 AT91_XDMAC_DT_PERID(8)>; |
| dma-names = "rx", "tx"; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx3: flexcom@e1824000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe1824000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe1824000 0x800>; |
| status = "disabled"; |
| |
| uart3: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; |
| clock-names = "usart"; |
| dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>, |
| <&dma1 AT91_XDMAC_DT_PERID(11)>; |
| dma-names = "tx", "rx"; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| status = "disabled"; |
| }; |
| }; |
| |
| trng: rng@e2010000 { |
| compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng"; |
| reg = <0xe2010000 0x100>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 97>; |
| status = "disabled"; |
| }; |
| |
| flx4: flexcom@e2018000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe2018000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe2018000 0x800>; |
| status = "disabled"; |
| |
| uart4: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; |
| clock-names = "usart"; |
| dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>, |
| <&dma1 AT91_XDMAC_DT_PERID(13)>; |
| dma-names = "tx", "rx"; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx7: flexcom@e2024000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe2024000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe2024000 0x800>; |
| status = "disabled"; |
| |
| uart7: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; |
| clock-names = "usart"; |
| dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>, |
| <&dma1 AT91_XDMAC_DT_PERID(19)>; |
| dma-names = "tx", "rx"; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| }; |
| |
| gmac0: ethernet@e2800000 { |
| compatible = "microchip,sama7g5-gem"; |
| reg = <0xe2800000 0x1000>; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>; |
| clock-names = "pclk", "hclk", "tx_clk", "tsu_clk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 51>; |
| assigned-clock-rates = <125000000>; |
| status = "disabled"; |
| }; |
| |
| gmac1: ethernet@e2804000 { |
| compatible = "microchip,sama7g5-emac"; |
| reg = <0xe2804000 0x1000>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH |
| GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>; |
| clock-names = "pclk", "hclk"; |
| status = "disabled"; |
| }; |
| |
| dma0: dma-controller@e2808000 { |
| compatible = "microchip,sama7g5-dma"; |
| reg = <0xe2808000 0x1000>; |
| interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; |
| clock-names = "dma_clk"; |
| status = "disabled"; |
| }; |
| |
| dma1: dma-controller@e280c000 { |
| compatible = "microchip,sama7g5-dma"; |
| reg = <0xe280c000 0x1000>; |
| interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; |
| clock-names = "dma_clk"; |
| status = "disabled"; |
| }; |
| |
| /* Place dma2 here despite it's address */ |
| dma2: dma-controller@e1200000 { |
| compatible = "microchip,sama7g5-dma"; |
| reg = <0xe1200000 0x1000>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; |
| clock-names = "dma_clk"; |
| dma-requests = <0>; |
| status = "disabled"; |
| }; |
| |
| tcb0: timer@e2814000 { |
| compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xe2814000 0x100>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>; |
| clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; |
| }; |
| |
| flx8: flexcom@e2818000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe2818000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe2818000 0x800>; |
| status = "disabled"; |
| |
| i2c8: i2c@600 { |
| compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; |
| atmel,fifo-size = <32>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>, |
| <&dma0 AT91_XDMAC_DT_PERID(22)>; |
| dma-names = "rx", "tx"; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx9: flexcom@e281c000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe281c000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe281c000 0x800>; |
| status = "disabled"; |
| |
| i2c9: i2c@600 { |
| compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; |
| atmel,fifo-size = <32>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>, |
| <&dma0 AT91_XDMAC_DT_PERID(24)>; |
| dma-names = "rx", "tx"; |
| atmel,use-dma-rx; |
| atmel,use-dma-tx; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx11: flexcom@e2824000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe2824000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 49>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe2824000 0x800>; |
| status = "disabled"; |
| |
| spi11: spi@400 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0x400 0x200>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 49>; |
| clock-names = "spi_clk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| atmel,fifo-size = <32>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>, |
| <&dma0 AT91_XDMAC_DT_PERID(28)>; |
| dma-names = "rx", "tx"; |
| status = "disabled"; |
| }; |
| }; |
| |
| uddrc: uddrc@e3800000 { |
| compatible = "microchip,sama7g5-uddrc"; |
| reg = <0xe3800000 0x4000>; |
| status = "okay"; |
| }; |
| |
| ddr3phy: ddr3phy@e3804000 { |
| compatible = "microchip,sama7g5-ddr3phy"; |
| reg = <0xe3804000 0x1000>; |
| status = "okay"; |
| }; |
| |
| gic: interrupt-controller@e8c11000 { |
| compatible = "arm,cortex-a7-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| interrupt-parent; |
| reg = <0xe8c11000 0x1000>, |
| <0xe8c12000 0x2000>; |
| }; |
| }; |
| }; |
