| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2019 Pengutronix, Michael Tretter <kernel@pengutronix.de> |
| * |
| * Convert NAL units between raw byte sequence payloads (RBSP) and C structs |
| * |
| * The conversion is defined in "ITU-T Rec. H.264 (04/2017) Advanced video |
| * coding for generic audiovisual services". Decoder drivers may use the |
| * parser to parse RBSP from encoded streams and configure the hardware, if |
| * the hardware is not able to parse RBSP itself. Encoder drivers may use the |
| * generator to generate the RBSP for SPS/PPS nal units and add them to the |
| * encoded stream if the hardware does not generate the units. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/v4l2-controls.h> |
| |
| #include <linux/device.h> |
| #include <linux/export.h> |
| #include <linux/log2.h> |
| |
| #include "nal-h264.h" |
| #include "nal-rbsp.h" |
| |
| /* |
| * See Rec. ITU-T H.264 (04/2017) Table 7-1 - NAL unit type codes, syntax |
| * element categories, and NAL unit type classes |
| */ |
| enum nal_unit_type { |
| SEQUENCE_PARAMETER_SET = 7, |
| PICTURE_PARAMETER_SET = 8, |
| FILLER_DATA = 12, |
| }; |
| |
| static void nal_h264_write_start_code_prefix(struct rbsp *rbsp) |
| { |
| u8 *p = rbsp->data + DIV_ROUND_UP(rbsp->pos, 8); |
| int i = 4; |
| |
| if (DIV_ROUND_UP(rbsp->pos, 8) + i > rbsp->size) { |
| rbsp->error = -EINVAL; |
| return; |
| } |
| |
| p[0] = 0x00; |
| p[1] = 0x00; |
| p[2] = 0x00; |
| p[3] = 0x01; |
| |
| rbsp->pos += i * 8; |
| } |
| |
| static void nal_h264_read_start_code_prefix(struct rbsp *rbsp) |
| { |
| u8 *p = rbsp->data + DIV_ROUND_UP(rbsp->pos, 8); |
| int i = 4; |
| |
| if (DIV_ROUND_UP(rbsp->pos, 8) + i > rbsp->size) { |
| rbsp->error = -EINVAL; |
| return; |
| } |
| |
| if (p[0] != 0x00 || p[1] != 0x00 || p[2] != 0x00 || p[3] != 0x01) { |
| rbsp->error = -EINVAL; |
| return; |
| } |
| |
| rbsp->pos += i * 8; |
| } |
| |
| static void nal_h264_write_filler_data(struct rbsp *rbsp) |
| { |
| u8 *p = rbsp->data + DIV_ROUND_UP(rbsp->pos, 8); |
| int i; |
| |
| /* Keep 1 byte extra for terminating the NAL unit */ |
| i = rbsp->size - DIV_ROUND_UP(rbsp->pos, 8) - 1; |
| memset(p, 0xff, i); |
| rbsp->pos += i * 8; |
| } |
| |
| static void nal_h264_read_filler_data(struct rbsp *rbsp) |
| { |
| u8 *p = rbsp->data + DIV_ROUND_UP(rbsp->pos, 8); |
| |
| while (*p == 0xff) { |
| if (DIV_ROUND_UP(rbsp->pos, 8) > rbsp->size) { |
| rbsp->error = -EINVAL; |
| return; |
| } |
| |
| p++; |
| rbsp->pos += 8; |
| } |
| } |
| |
| static void nal_h264_rbsp_hrd_parameters(struct rbsp *rbsp, |
| struct nal_h264_hrd_parameters *hrd) |
| { |
| unsigned int i; |
| |
| if (!hrd) { |
| rbsp->error = -EINVAL; |
| return; |
| } |
| |
| rbsp_uev(rbsp, &hrd->cpb_cnt_minus1); |
| rbsp_bits(rbsp, 4, &hrd->bit_rate_scale); |
| rbsp_bits(rbsp, 4, &hrd->cpb_size_scale); |
| |
| for (i = 0; i <= hrd->cpb_cnt_minus1; i++) { |
| rbsp_uev(rbsp, &hrd->bit_rate_value_minus1[i]); |
| rbsp_uev(rbsp, &hrd->cpb_size_value_minus1[i]); |
| rbsp_bit(rbsp, &hrd->cbr_flag[i]); |
| } |
| |
| rbsp_bits(rbsp, 5, &hrd->initial_cpb_removal_delay_length_minus1); |
| rbsp_bits(rbsp, 5, &hrd->cpb_removal_delay_length_minus1); |
| rbsp_bits(rbsp, 5, &hrd->dpb_output_delay_length_minus1); |
| rbsp_bits(rbsp, 5, &hrd->time_offset_length); |
| } |
| |
| static void nal_h264_rbsp_vui_parameters(struct rbsp *rbsp, |
| struct nal_h264_vui_parameters *vui) |
| { |
| if (!vui) { |
| rbsp->error = -EINVAL; |
| return; |
| } |
| |
| rbsp_bit(rbsp, &vui->aspect_ratio_info_present_flag); |
| if (vui->aspect_ratio_info_present_flag) { |
| rbsp_bits(rbsp, 8, &vui->aspect_ratio_idc); |
| if (vui->aspect_ratio_idc == 255) { |
| rbsp_bits(rbsp, 16, &vui->sar_width); |
| rbsp_bits(rbsp, 16, &vui->sar_height); |
| } |
| } |
| |
| rbsp_bit(rbsp, &vui->overscan_info_present_flag); |
| if (vui->overscan_info_present_flag) |
| rbsp_bit(rbsp, &vui->overscan_appropriate_flag); |
| |
| rbsp_bit(rbsp, &vui->video_signal_type_present_flag); |
| if (vui->video_signal_type_present_flag) { |
| rbsp_bits(rbsp, 3, &vui->video_format); |
| rbsp_bit(rbsp, &vui->video_full_range_flag); |
| |
| rbsp_bit(rbsp, &vui->colour_description_present_flag); |
| if (vui->colour_description_present_flag) { |
| rbsp_bits(rbsp, 8, &vui->colour_primaries); |
| rbsp_bits(rbsp, 8, &vui->transfer_characteristics); |
| rbsp_bits(rbsp, 8, &vui->matrix_coefficients); |
| } |
| } |
| |
| rbsp_bit(rbsp, &vui->chroma_loc_info_present_flag); |
| if (vui->chroma_loc_info_present_flag) { |
| rbsp_uev(rbsp, &vui->chroma_sample_loc_type_top_field); |
| rbsp_uev(rbsp, &vui->chroma_sample_loc_type_bottom_field); |
| } |
| |
| rbsp_bit(rbsp, &vui->timing_info_present_flag); |
| if (vui->timing_info_present_flag) { |
| rbsp_bits(rbsp, 32, &vui->num_units_in_tick); |
| rbsp_bits(rbsp, 32, &vui->time_scale); |
| rbsp_bit(rbsp, &vui->fixed_frame_rate_flag); |
| } |
| |
| rbsp_bit(rbsp, &vui->nal_hrd_parameters_present_flag); |
| if (vui->nal_hrd_parameters_present_flag) |
| nal_h264_rbsp_hrd_parameters(rbsp, &vui->nal_hrd_parameters); |
| |
| rbsp_bit(rbsp, &vui->vcl_hrd_parameters_present_flag); |
| if (vui->vcl_hrd_parameters_present_flag) |
| nal_h264_rbsp_hrd_parameters(rbsp, &vui->vcl_hrd_parameters); |
| |
| if (vui->nal_hrd_parameters_present_flag || |
| vui->vcl_hrd_parameters_present_flag) |
| rbsp_bit(rbsp, &vui->low_delay_hrd_flag); |
| |
| rbsp_bit(rbsp, &vui->pic_struct_present_flag); |
| |
| rbsp_bit(rbsp, &vui->bitstream_restriction_flag); |
| if (vui->bitstream_restriction_flag) { |
| rbsp_bit(rbsp, &vui->motion_vectors_over_pic_boundaries_flag); |
| rbsp_uev(rbsp, &vui->max_bytes_per_pic_denom); |
| rbsp_uev(rbsp, &vui->max_bits_per_mb_denom); |
| rbsp_uev(rbsp, &vui->log2_max_mv_length_horizontal); |
| rbsp_uev(rbsp, &vui->log21_max_mv_length_vertical); |
| rbsp_uev(rbsp, &vui->max_num_reorder_frames); |
| rbsp_uev(rbsp, &vui->max_dec_frame_buffering); |
| } |
| } |
| |
| static void nal_h264_rbsp_sps(struct rbsp *rbsp, struct nal_h264_sps *sps) |
| { |
| unsigned int i; |
| |
| if (!sps) { |
| rbsp->error = -EINVAL; |
| return; |
| } |
| |
| rbsp_bits(rbsp, 8, &sps->profile_idc); |
| rbsp_bit(rbsp, &sps->constraint_set0_flag); |
| rbsp_bit(rbsp, &sps->constraint_set1_flag); |
| rbsp_bit(rbsp, &sps->constraint_set2_flag); |
| rbsp_bit(rbsp, &sps->constraint_set3_flag); |
| rbsp_bit(rbsp, &sps->constraint_set4_flag); |
| rbsp_bit(rbsp, &sps->constraint_set5_flag); |
| rbsp_bits(rbsp, 2, &sps->reserved_zero_2bits); |
| rbsp_bits(rbsp, 8, &sps->level_idc); |
| |
| rbsp_uev(rbsp, &sps->seq_parameter_set_id); |
| |
| if (sps->profile_idc == 100 || sps->profile_idc == 110 || |
| sps->profile_idc == 122 || sps->profile_idc == 244 || |
| sps->profile_idc == 44 || sps->profile_idc == 83 || |
| sps->profile_idc == 86 || sps->profile_idc == 118 || |
| sps->profile_idc == 128 || sps->profile_idc == 138 || |
| sps->profile_idc == 139 || sps->profile_idc == 134 || |
| sps->profile_idc == 135) { |
| rbsp_uev(rbsp, &sps->chroma_format_idc); |
| |
| if (sps->chroma_format_idc == 3) |
| rbsp_bit(rbsp, &sps->separate_colour_plane_flag); |
| rbsp_uev(rbsp, &sps->bit_depth_luma_minus8); |
| rbsp_uev(rbsp, &sps->bit_depth_chroma_minus8); |
| rbsp_bit(rbsp, &sps->qpprime_y_zero_transform_bypass_flag); |
| rbsp_bit(rbsp, &sps->seq_scaling_matrix_present_flag); |
| if (sps->seq_scaling_matrix_present_flag) |
| rbsp->error = -EINVAL; |
| } |
| |
| rbsp_uev(rbsp, &sps->log2_max_frame_num_minus4); |
| |
| rbsp_uev(rbsp, &sps->pic_order_cnt_type); |
| switch (sps->pic_order_cnt_type) { |
| case 0: |
| rbsp_uev(rbsp, &sps->log2_max_pic_order_cnt_lsb_minus4); |
| break; |
| case 1: |
| rbsp_bit(rbsp, &sps->delta_pic_order_always_zero_flag); |
| rbsp_sev(rbsp, &sps->offset_for_non_ref_pic); |
| rbsp_sev(rbsp, &sps->offset_for_top_to_bottom_field); |
| |
| rbsp_uev(rbsp, &sps->num_ref_frames_in_pic_order_cnt_cycle); |
| for (i = 0; i < sps->num_ref_frames_in_pic_order_cnt_cycle; i++) |
| rbsp_sev(rbsp, &sps->offset_for_ref_frame[i]); |
| break; |
| default: |
| rbsp->error = -EINVAL; |
| break; |
| } |
| |
| rbsp_uev(rbsp, &sps->max_num_ref_frames); |
| rbsp_bit(rbsp, &sps->gaps_in_frame_num_value_allowed_flag); |
| rbsp_uev(rbsp, &sps->pic_width_in_mbs_minus1); |
| rbsp_uev(rbsp, &sps->pic_height_in_map_units_minus1); |
| |
| rbsp_bit(rbsp, &sps->frame_mbs_only_flag); |
| if (!sps->frame_mbs_only_flag) |
| rbsp_bit(rbsp, &sps->mb_adaptive_frame_field_flag); |
| |
| rbsp_bit(rbsp, &sps->direct_8x8_inference_flag); |
| |
| rbsp_bit(rbsp, &sps->frame_cropping_flag); |
| if (sps->frame_cropping_flag) { |
| rbsp_uev(rbsp, &sps->crop_left); |
| rbsp_uev(rbsp, &sps->crop_right); |
| rbsp_uev(rbsp, &sps->crop_top); |
| rbsp_uev(rbsp, &sps->crop_bottom); |
| } |
| |
| rbsp_bit(rbsp, &sps->vui_parameters_present_flag); |
| if (sps->vui_parameters_present_flag) |
| nal_h264_rbsp_vui_parameters(rbsp, &sps->vui); |
| } |
| |
| static void nal_h264_rbsp_pps(struct rbsp *rbsp, struct nal_h264_pps *pps) |
| { |
| int i; |
| |
| rbsp_uev(rbsp, &pps->pic_parameter_set_id); |
| rbsp_uev(rbsp, &pps->seq_parameter_set_id); |
| rbsp_bit(rbsp, &pps->entropy_coding_mode_flag); |
| rbsp_bit(rbsp, &pps->bottom_field_pic_order_in_frame_present_flag); |
| rbsp_uev(rbsp, &pps->num_slice_groups_minus1); |
| if (pps->num_slice_groups_minus1 > 0) { |
| rbsp_uev(rbsp, &pps->slice_group_map_type); |
| switch (pps->slice_group_map_type) { |
| case 0: |
| for (i = 0; i < pps->num_slice_groups_minus1; i++) |
| rbsp_uev(rbsp, &pps->run_length_minus1[i]); |
| break; |
| case 2: |
| for (i = 0; i < pps->num_slice_groups_minus1; i++) { |
| rbsp_uev(rbsp, &pps->top_left[i]); |
| rbsp_uev(rbsp, &pps->bottom_right[i]); |
| } |
| break; |
| case 3: case 4: case 5: |
| rbsp_bit(rbsp, &pps->slice_group_change_direction_flag); |
| rbsp_uev(rbsp, &pps->slice_group_change_rate_minus1); |
| break; |
| case 6: |
| rbsp_uev(rbsp, &pps->pic_size_in_map_units_minus1); |
| for (i = 0; i < pps->pic_size_in_map_units_minus1; i++) |
| rbsp_bits(rbsp, |
| order_base_2(pps->num_slice_groups_minus1 + 1), |
| &pps->slice_group_id[i]); |
| break; |
| default: |
| break; |
| } |
| } |
| rbsp_uev(rbsp, &pps->num_ref_idx_l0_default_active_minus1); |
| rbsp_uev(rbsp, &pps->num_ref_idx_l1_default_active_minus1); |
| rbsp_bit(rbsp, &pps->weighted_pred_flag); |
| rbsp_bits(rbsp, 2, &pps->weighted_bipred_idc); |
| rbsp_sev(rbsp, &pps->pic_init_qp_minus26); |
| rbsp_sev(rbsp, &pps->pic_init_qs_minus26); |
| rbsp_sev(rbsp, &pps->chroma_qp_index_offset); |
| rbsp_bit(rbsp, &pps->deblocking_filter_control_present_flag); |
| rbsp_bit(rbsp, &pps->constrained_intra_pred_flag); |
| rbsp_bit(rbsp, &pps->redundant_pic_cnt_present_flag); |
| if (/* more_rbsp_data() */ false) { |
| rbsp_bit(rbsp, &pps->transform_8x8_mode_flag); |
| rbsp_bit(rbsp, &pps->pic_scaling_matrix_present_flag); |
| if (pps->pic_scaling_matrix_present_flag) |
| rbsp->error = -EINVAL; |
| rbsp_sev(rbsp, &pps->second_chroma_qp_index_offset); |
| } |
| } |
| |
| /** |
| * nal_h264_write_sps() - Write SPS NAL unit into RBSP format |
| * @dev: device pointer |
| * @dest: the buffer that is filled with RBSP data |
| * @n: maximum size of @dest in bytes |
| * @sps: &struct nal_h264_sps to convert to RBSP |
| * |
| * Convert @sps to RBSP data and write it into @dest. |
| * |
| * The size of the SPS NAL unit is not known in advance and this function will |
| * fail, if @dest does not hold sufficient space for the SPS NAL unit. |
| * |
| * Return: number of bytes written to @dest or negative error code |
| */ |
| ssize_t nal_h264_write_sps(const struct device *dev, |
| void *dest, size_t n, struct nal_h264_sps *sps) |
| { |
| struct rbsp rbsp; |
| unsigned int forbidden_zero_bit = 0; |
| unsigned int nal_ref_idc = 0; |
| unsigned int nal_unit_type = SEQUENCE_PARAMETER_SET; |
| |
| if (!dest) |
| return -EINVAL; |
| |
| rbsp_init(&rbsp, dest, n, &write); |
| |
| nal_h264_write_start_code_prefix(&rbsp); |
| |
| rbsp_bit(&rbsp, &forbidden_zero_bit); |
| rbsp_bits(&rbsp, 2, &nal_ref_idc); |
| rbsp_bits(&rbsp, 5, &nal_unit_type); |
| |
| nal_h264_rbsp_sps(&rbsp, sps); |
| |
| rbsp_trailing_bits(&rbsp); |
| |
| if (rbsp.error) |
| return rbsp.error; |
| |
| return DIV_ROUND_UP(rbsp.pos, 8); |
| } |
| EXPORT_SYMBOL_GPL(nal_h264_write_sps); |
| |
| /** |
| * nal_h264_read_sps() - Read SPS NAL unit from RBSP format |
| * @dev: device pointer |
| * @sps: the &struct nal_h264_sps to fill from the RBSP data |
| * @src: the buffer that contains the RBSP data |
| * @n: size of @src in bytes |
| * |
| * Read RBSP data from @src and use it to fill @sps. |
| * |
| * Return: number of bytes read from @src or negative error code |
| */ |
| ssize_t nal_h264_read_sps(const struct device *dev, |
| struct nal_h264_sps *sps, void *src, size_t n) |
| { |
| struct rbsp rbsp; |
| unsigned int forbidden_zero_bit; |
| unsigned int nal_ref_idc; |
| unsigned int nal_unit_type; |
| |
| if (!src) |
| return -EINVAL; |
| |
| rbsp_init(&rbsp, src, n, &read); |
| |
| nal_h264_read_start_code_prefix(&rbsp); |
| |
| rbsp_bit(&rbsp, &forbidden_zero_bit); |
| rbsp_bits(&rbsp, 2, &nal_ref_idc); |
| rbsp_bits(&rbsp, 5, &nal_unit_type); |
| |
| if (rbsp.error || |
| forbidden_zero_bit != 0 || |
| nal_ref_idc != 0 || |
| nal_unit_type != SEQUENCE_PARAMETER_SET) |
| return -EINVAL; |
| |
| nal_h264_rbsp_sps(&rbsp, sps); |
| |
| rbsp_trailing_bits(&rbsp); |
| |
| if (rbsp.error) |
| return rbsp.error; |
| |
| return DIV_ROUND_UP(rbsp.pos, 8); |
| } |
| EXPORT_SYMBOL_GPL(nal_h264_read_sps); |
| |
| /** |
| * nal_h264_write_pps() - Write PPS NAL unit into RBSP format |
| * @dev: device pointer |
| * @dest: the buffer that is filled with RBSP data |
| * @n: maximum size of @dest in bytes |
| * @pps: &struct nal_h264_pps to convert to RBSP |
| * |
| * Convert @pps to RBSP data and write it into @dest. |
| * |
| * The size of the PPS NAL unit is not known in advance and this function will |
| * fail, if @dest does not hold sufficient space for the PPS NAL unit. |
| * |
| * Return: number of bytes written to @dest or negative error code |
| */ |
| ssize_t nal_h264_write_pps(const struct device *dev, |
| void *dest, size_t n, struct nal_h264_pps *pps) |
| { |
| struct rbsp rbsp; |
| unsigned int forbidden_zero_bit = 0; |
| unsigned int nal_ref_idc = 0; |
| unsigned int nal_unit_type = PICTURE_PARAMETER_SET; |
| |
| if (!dest) |
| return -EINVAL; |
| |
| rbsp_init(&rbsp, dest, n, &write); |
| |
| nal_h264_write_start_code_prefix(&rbsp); |
| |
| /* NAL unit header */ |
| rbsp_bit(&rbsp, &forbidden_zero_bit); |
| rbsp_bits(&rbsp, 2, &nal_ref_idc); |
| rbsp_bits(&rbsp, 5, &nal_unit_type); |
| |
| nal_h264_rbsp_pps(&rbsp, pps); |
| |
| rbsp_trailing_bits(&rbsp); |
| |
| if (rbsp.error) |
| return rbsp.error; |
| |
| return DIV_ROUND_UP(rbsp.pos, 8); |
| } |
| EXPORT_SYMBOL_GPL(nal_h264_write_pps); |
| |
| /** |
| * nal_h264_read_pps() - Read PPS NAL unit from RBSP format |
| * @dev: device pointer |
| * @pps: the &struct nal_h264_pps to fill from the RBSP data |
| * @src: the buffer that contains the RBSP data |
| * @n: size of @src in bytes |
| * |
| * Read RBSP data from @src and use it to fill @pps. |
| * |
| * Return: number of bytes read from @src or negative error code |
| */ |
| ssize_t nal_h264_read_pps(const struct device *dev, |
| struct nal_h264_pps *pps, void *src, size_t n) |
| { |
| struct rbsp rbsp; |
| |
| if (!src) |
| return -EINVAL; |
| |
| rbsp_init(&rbsp, src, n, &read); |
| |
| nal_h264_read_start_code_prefix(&rbsp); |
| |
| /* NAL unit header */ |
| rbsp.pos += 8; |
| |
| nal_h264_rbsp_pps(&rbsp, pps); |
| |
| rbsp_trailing_bits(&rbsp); |
| |
| if (rbsp.error) |
| return rbsp.error; |
| |
| return DIV_ROUND_UP(rbsp.pos, 8); |
| } |
| EXPORT_SYMBOL_GPL(nal_h264_read_pps); |
| |
| /** |
| * nal_h264_write_filler() - Write filler data RBSP |
| * @dev: device pointer |
| * @dest: buffer to fill with filler data |
| * @n: size of the buffer to fill with filler data |
| * |
| * Write a filler data RBSP to @dest with a size of @n bytes and return the |
| * number of written filler data bytes. |
| * |
| * Use this function to generate dummy data in an RBSP data stream that can be |
| * safely ignored by h264 decoders. |
| * |
| * The RBSP format of the filler data is specified in Rec. ITU-T H.264 |
| * (04/2017) 7.3.2.7 Filler data RBSP syntax. |
| * |
| * Return: number of filler data bytes (including marker) or negative error |
| */ |
| ssize_t nal_h264_write_filler(const struct device *dev, void *dest, size_t n) |
| { |
| struct rbsp rbsp; |
| unsigned int forbidden_zero_bit = 0; |
| unsigned int nal_ref_idc = 0; |
| unsigned int nal_unit_type = FILLER_DATA; |
| |
| if (!dest) |
| return -EINVAL; |
| |
| rbsp_init(&rbsp, dest, n, &write); |
| |
| nal_h264_write_start_code_prefix(&rbsp); |
| |
| rbsp_bit(&rbsp, &forbidden_zero_bit); |
| rbsp_bits(&rbsp, 2, &nal_ref_idc); |
| rbsp_bits(&rbsp, 5, &nal_unit_type); |
| |
| nal_h264_write_filler_data(&rbsp); |
| |
| rbsp_trailing_bits(&rbsp); |
| |
| return DIV_ROUND_UP(rbsp.pos, 8); |
| } |
| EXPORT_SYMBOL_GPL(nal_h264_write_filler); |
| |
| /** |
| * nal_h264_read_filler() - Read filler data RBSP |
| * @dev: device pointer |
| * @src: buffer with RBSP data that is read |
| * @n: maximum size of src that shall be read |
| * |
| * Read a filler data RBSP from @src up to a maximum size of @n bytes and |
| * return the size of the filler data in bytes including the marker. |
| * |
| * This function is used to parse filler data and skip the respective bytes in |
| * the RBSP data. |
| * |
| * The RBSP format of the filler data is specified in Rec. ITU-T H.264 |
| * (04/2017) 7.3.2.7 Filler data RBSP syntax. |
| * |
| * Return: number of filler data bytes (including marker) or negative error |
| */ |
| ssize_t nal_h264_read_filler(const struct device *dev, void *src, size_t n) |
| { |
| struct rbsp rbsp; |
| unsigned int forbidden_zero_bit; |
| unsigned int nal_ref_idc; |
| unsigned int nal_unit_type; |
| |
| if (!src) |
| return -EINVAL; |
| |
| rbsp_init(&rbsp, src, n, &read); |
| |
| nal_h264_read_start_code_prefix(&rbsp); |
| |
| rbsp_bit(&rbsp, &forbidden_zero_bit); |
| rbsp_bits(&rbsp, 2, &nal_ref_idc); |
| rbsp_bits(&rbsp, 5, &nal_unit_type); |
| |
| if (rbsp.error) |
| return rbsp.error; |
| if (forbidden_zero_bit != 0 || |
| nal_ref_idc != 0 || |
| nal_unit_type != FILLER_DATA) |
| return -EINVAL; |
| |
| nal_h264_read_filler_data(&rbsp); |
| rbsp_trailing_bits(&rbsp); |
| |
| if (rbsp.error) |
| return rbsp.error; |
| |
| return DIV_ROUND_UP(rbsp.pos, 8); |
| } |
| EXPORT_SYMBOL_GPL(nal_h264_read_filler); |