| /* |
| * linux/drivers/misc/xillybus.h |
| * |
| * Copyright 2011 Xillybus Ltd, http://xillybus.com |
| * |
| * Header file for the Xillybus FPGA/host framework. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the smems of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| */ |
| |
| #ifndef __XILLYBUS_H |
| #define __XILLYBUS_H |
| |
| #include <linux/list.h> |
| #include <linux/device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/interrupt.h> |
| #include <linux/sched.h> |
| #include <linux/cdev.h> |
| #include <linux/spinlock.h> |
| #include <linux/mutex.h> |
| #include <linux/workqueue.h> |
| |
| struct xilly_endpoint_hardware; |
| |
| struct xilly_page { |
| struct list_head node; |
| unsigned long addr; |
| unsigned int order; |
| }; |
| |
| struct xilly_dma { |
| struct list_head node; |
| struct pci_dev *pdev; |
| struct device *dev; |
| dma_addr_t dma_addr; |
| size_t size; |
| int direction; |
| }; |
| |
| struct xilly_buffer { |
| void *addr; |
| dma_addr_t dma_addr; |
| int end_offset; /* Counting elements, not bytes */ |
| }; |
| |
| struct xilly_cleanup { |
| struct list_head to_kfree; |
| struct list_head to_pagefree; |
| struct list_head to_unmap; |
| }; |
| |
| struct xilly_idt_handle { |
| unsigned char *chandesc; |
| unsigned char *idt; |
| int entries; |
| }; |
| |
| /* |
| * Read-write confusion: wr_* and rd_* notation sticks to FPGA view, so |
| * wr_* buffers are those consumed by read(), since the FPGA writes to them |
| * and vice versa. |
| */ |
| |
| struct xilly_channel { |
| struct xilly_endpoint *endpoint; |
| int chan_num; |
| int log2_element_size; |
| int seekable; |
| |
| struct xilly_buffer **wr_buffers; /* FPGA writes, driver reads! */ |
| int num_wr_buffers; |
| unsigned int wr_buf_size; /* In bytes */ |
| int wr_fpga_buf_idx; |
| int wr_host_buf_idx; |
| int wr_host_buf_pos; |
| int wr_empty; |
| int wr_ready; /* Significant only when wr_empty == 1 */ |
| int wr_sleepy; |
| int wr_eof; |
| int wr_hangup; |
| spinlock_t wr_spinlock; |
| struct mutex wr_mutex; |
| wait_queue_head_t wr_wait; |
| wait_queue_head_t wr_ready_wait; |
| int wr_ref_count; |
| int wr_synchronous; |
| int wr_allow_partial; |
| int wr_exclusive_open; |
| int wr_supports_nonempty; |
| |
| struct xilly_buffer **rd_buffers; /* FPGA reads, driver writes! */ |
| int num_rd_buffers; |
| unsigned int rd_buf_size; /* In bytes */ |
| int rd_fpga_buf_idx; |
| int rd_host_buf_pos; |
| int rd_host_buf_idx; |
| int rd_full; |
| spinlock_t rd_spinlock; |
| struct mutex rd_mutex; |
| wait_queue_head_t rd_wait; |
| int rd_ref_count; |
| int rd_allow_partial; |
| int rd_synchronous; |
| int rd_exclusive_open; |
| struct delayed_work rd_workitem; |
| unsigned char rd_leftovers[4]; |
| }; |
| |
| struct xilly_endpoint { |
| /* |
| * One of pdev and dev is always NULL, and the other is a valid |
| * pointer, depending on the type of device |
| */ |
| struct pci_dev *pdev; |
| struct device *dev; |
| struct resource res; /* OF devices only */ |
| struct xilly_endpoint_hardware *ephw; |
| |
| struct list_head ep_list; |
| int dma_using_dac; /* =1 if 64-bit DMA is used, =0 otherwise. */ |
| __iomem u32 *registers; |
| int fatal_error; |
| |
| struct mutex register_mutex; |
| wait_queue_head_t ep_wait; |
| |
| /* List of memory allocations, to make release easy */ |
| struct xilly_cleanup cleanup; |
| |
| /* Channels and message handling */ |
| struct cdev cdev; |
| |
| int major; |
| int lowest_minor; /* Highest minor = lowest_minor + num_channels - 1 */ |
| |
| int num_channels; /* EXCLUDING message buffer */ |
| struct xilly_channel **channels; |
| int msg_counter; |
| int failed_messages; |
| int idtlen; |
| |
| u32 *msgbuf_addr; |
| dma_addr_t msgbuf_dma_addr; |
| unsigned int msg_buf_size; |
| }; |
| |
| struct xilly_endpoint_hardware { |
| struct module *owner; |
| void (*hw_sync_sgl_for_cpu)(struct xilly_endpoint *, |
| dma_addr_t, |
| size_t, |
| int); |
| void (*hw_sync_sgl_for_device)(struct xilly_endpoint *, |
| dma_addr_t, |
| size_t, |
| int); |
| dma_addr_t (*map_single)(struct xilly_cleanup *, |
| struct xilly_endpoint *, |
| void *, |
| size_t, |
| int); |
| void (*unmap_single)(struct xilly_dma *entry); |
| }; |
| |
| irqreturn_t xillybus_isr(int irq, void *data); |
| |
| void xillybus_do_cleanup(struct xilly_cleanup *mem, |
| struct xilly_endpoint *endpoint); |
| |
| struct xilly_endpoint *xillybus_init_endpoint(struct pci_dev *pdev, |
| struct device *dev, |
| struct xilly_endpoint_hardware |
| *ephw); |
| |
| int xillybus_endpoint_discovery(struct xilly_endpoint *endpoint); |
| |
| void xillybus_endpoint_remove(struct xilly_endpoint *endpoint); |
| |
| #endif /* __XILLYBUS_H */ |