| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * rcar_lvds.c -- R-Car LVDS Encoder |
| * |
| * Copyright (C) 2013-2018 Renesas Electronics Corporation |
| * |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_graph.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_bridge.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_panel.h> |
| |
| #include "rcar_lvds_regs.h" |
| |
| /* Keep in sync with the LVDCR0.LVMD hardware register values. */ |
| enum rcar_lvds_mode { |
| RCAR_LVDS_MODE_JEIDA = 0, |
| RCAR_LVDS_MODE_MIRROR = 1, |
| RCAR_LVDS_MODE_VESA = 4, |
| }; |
| |
| #define RCAR_LVDS_QUIRK_LANES (1 << 0) /* LVDS lanes 1 and 3 inverted */ |
| #define RCAR_LVDS_QUIRK_GEN2_PLLCR (1 << 1) /* LVDPLLCR has gen2 layout */ |
| #define RCAR_LVDS_QUIRK_GEN3_LVEN (1 << 2) /* LVEN bit needs to be set */ |
| /* on R8A77970/R8A7799x */ |
| |
| struct rcar_lvds_device_info { |
| unsigned int gen; |
| unsigned int quirks; |
| }; |
| |
| struct rcar_lvds { |
| struct device *dev; |
| const struct rcar_lvds_device_info *info; |
| |
| struct drm_bridge bridge; |
| |
| struct drm_bridge *next_bridge; |
| struct drm_connector connector; |
| struct drm_panel *panel; |
| |
| void __iomem *mmio; |
| struct clk *clock; |
| bool enabled; |
| |
| struct drm_display_mode display_mode; |
| enum rcar_lvds_mode mode; |
| }; |
| |
| #define bridge_to_rcar_lvds(bridge) \ |
| container_of(bridge, struct rcar_lvds, bridge) |
| |
| #define connector_to_rcar_lvds(connector) \ |
| container_of(connector, struct rcar_lvds, connector) |
| |
| static void rcar_lvds_write(struct rcar_lvds *lvds, u32 reg, u32 data) |
| { |
| iowrite32(data, lvds->mmio + reg); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Connector & Panel |
| */ |
| |
| static int rcar_lvds_connector_get_modes(struct drm_connector *connector) |
| { |
| struct rcar_lvds *lvds = connector_to_rcar_lvds(connector); |
| |
| return drm_panel_get_modes(lvds->panel); |
| } |
| |
| static int rcar_lvds_connector_atomic_check(struct drm_connector *connector, |
| struct drm_connector_state *state) |
| { |
| struct rcar_lvds *lvds = connector_to_rcar_lvds(connector); |
| const struct drm_display_mode *panel_mode; |
| struct drm_crtc_state *crtc_state; |
| |
| if (!state->crtc) |
| return 0; |
| |
| if (list_empty(&connector->modes)) { |
| dev_dbg(lvds->dev, "connector: empty modes list\n"); |
| return -EINVAL; |
| } |
| |
| panel_mode = list_first_entry(&connector->modes, |
| struct drm_display_mode, head); |
| |
| /* We're not allowed to modify the resolution. */ |
| crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc); |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| |
| if (crtc_state->mode.hdisplay != panel_mode->hdisplay || |
| crtc_state->mode.vdisplay != panel_mode->vdisplay) |
| return -EINVAL; |
| |
| /* The flat panel mode is fixed, just copy it to the adjusted mode. */ |
| drm_mode_copy(&crtc_state->adjusted_mode, panel_mode); |
| |
| return 0; |
| } |
| |
| static const struct drm_connector_helper_funcs rcar_lvds_conn_helper_funcs = { |
| .get_modes = rcar_lvds_connector_get_modes, |
| .atomic_check = rcar_lvds_connector_atomic_check, |
| }; |
| |
| static const struct drm_connector_funcs rcar_lvds_conn_funcs = { |
| .reset = drm_atomic_helper_connector_reset, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .destroy = drm_connector_cleanup, |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Bridge |
| */ |
| |
| static u32 rcar_lvds_lvdpllcr_gen2(unsigned int freq) |
| { |
| if (freq < 39000) |
| return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_38M; |
| else if (freq < 61000) |
| return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_60M; |
| else if (freq < 121000) |
| return LVDPLLCR_CEEN | LVDPLLCR_COSEL | LVDPLLCR_PLLDLYCNT_121M; |
| else |
| return LVDPLLCR_PLLDLYCNT_150M; |
| } |
| |
| static u32 rcar_lvds_lvdpllcr_gen3(unsigned int freq) |
| { |
| if (freq < 42000) |
| return LVDPLLCR_PLLDIVCNT_42M; |
| else if (freq < 85000) |
| return LVDPLLCR_PLLDIVCNT_85M; |
| else if (freq < 128000) |
| return LVDPLLCR_PLLDIVCNT_128M; |
| else |
| return LVDPLLCR_PLLDIVCNT_148M; |
| } |
| |
| static void rcar_lvds_enable(struct drm_bridge *bridge) |
| { |
| struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge); |
| const struct drm_display_mode *mode = &lvds->display_mode; |
| /* |
| * FIXME: We should really retrieve the CRTC through the state, but how |
| * do we get a state pointer? |
| */ |
| struct drm_crtc *crtc = lvds->bridge.encoder->crtc; |
| u32 lvdpllcr; |
| u32 lvdhcr; |
| u32 lvdcr0; |
| int ret; |
| |
| WARN_ON(lvds->enabled); |
| |
| ret = clk_prepare_enable(lvds->clock); |
| if (ret < 0) |
| return; |
| |
| /* |
| * Hardcode the channels and control signals routing for now. |
| * |
| * HSYNC -> CTRL0 |
| * VSYNC -> CTRL1 |
| * DISP -> CTRL2 |
| * 0 -> CTRL3 |
| */ |
| rcar_lvds_write(lvds, LVDCTRCR, LVDCTRCR_CTR3SEL_ZERO | |
| LVDCTRCR_CTR2SEL_DISP | LVDCTRCR_CTR1SEL_VSYNC | |
| LVDCTRCR_CTR0SEL_HSYNC); |
| |
| if (lvds->info->quirks & RCAR_LVDS_QUIRK_LANES) |
| lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 3) |
| | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 1); |
| else |
| lvdhcr = LVDCHCR_CHSEL_CH(0, 0) | LVDCHCR_CHSEL_CH(1, 1) |
| | LVDCHCR_CHSEL_CH(2, 2) | LVDCHCR_CHSEL_CH(3, 3); |
| |
| rcar_lvds_write(lvds, LVDCHCR, lvdhcr); |
| |
| /* PLL clock configuration. */ |
| if (lvds->info->quirks & RCAR_LVDS_QUIRK_GEN2_PLLCR) |
| lvdpllcr = rcar_lvds_lvdpllcr_gen2(mode->clock); |
| else |
| lvdpllcr = rcar_lvds_lvdpllcr_gen3(mode->clock); |
| rcar_lvds_write(lvds, LVDPLLCR, lvdpllcr); |
| |
| /* Set the LVDS mode and select the input. */ |
| lvdcr0 = lvds->mode << LVDCR0_LVMD_SHIFT; |
| if (drm_crtc_index(crtc) == 2) |
| lvdcr0 |= LVDCR0_DUSEL; |
| rcar_lvds_write(lvds, LVDCR0, lvdcr0); |
| |
| /* Turn all the channels on. */ |
| rcar_lvds_write(lvds, LVDCR1, |
| LVDCR1_CHSTBY(3) | LVDCR1_CHSTBY(2) | |
| LVDCR1_CHSTBY(1) | LVDCR1_CHSTBY(0) | LVDCR1_CLKSTBY); |
| |
| if (lvds->info->gen < 3) { |
| /* Enable LVDS operation and turn the bias circuitry on. */ |
| lvdcr0 |= LVDCR0_BEN | LVDCR0_LVEN; |
| rcar_lvds_write(lvds, LVDCR0, lvdcr0); |
| } |
| |
| /* Turn the PLL on. */ |
| lvdcr0 |= LVDCR0_PLLON; |
| rcar_lvds_write(lvds, LVDCR0, lvdcr0); |
| |
| if (lvds->info->gen > 2) { |
| /* Set LVDS normal mode. */ |
| lvdcr0 |= LVDCR0_PWD; |
| rcar_lvds_write(lvds, LVDCR0, lvdcr0); |
| } |
| |
| if (lvds->info->quirks & RCAR_LVDS_QUIRK_GEN3_LVEN) { |
| /* Turn on the LVDS PHY. */ |
| lvdcr0 |= LVDCR0_LVEN; |
| rcar_lvds_write(lvds, LVDCR0, lvdcr0); |
| } |
| |
| /* Wait for the startup delay. */ |
| usleep_range(100, 150); |
| |
| /* Turn the output on. */ |
| lvdcr0 |= LVDCR0_LVRES; |
| rcar_lvds_write(lvds, LVDCR0, lvdcr0); |
| |
| if (lvds->panel) { |
| drm_panel_prepare(lvds->panel); |
| drm_panel_enable(lvds->panel); |
| } |
| |
| lvds->enabled = true; |
| } |
| |
| static void rcar_lvds_disable(struct drm_bridge *bridge) |
| { |
| struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge); |
| |
| WARN_ON(!lvds->enabled); |
| |
| if (lvds->panel) { |
| drm_panel_disable(lvds->panel); |
| drm_panel_unprepare(lvds->panel); |
| } |
| |
| rcar_lvds_write(lvds, LVDCR0, 0); |
| rcar_lvds_write(lvds, LVDCR1, 0); |
| |
| clk_disable_unprepare(lvds->clock); |
| |
| lvds->enabled = false; |
| } |
| |
| static bool rcar_lvds_mode_fixup(struct drm_bridge *bridge, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| /* |
| * The internal LVDS encoder has a restricted clock frequency operating |
| * range (31MHz to 148.5MHz). Clamp the clock accordingly. |
| */ |
| adjusted_mode->clock = clamp(adjusted_mode->clock, 31000, 148500); |
| |
| return true; |
| } |
| |
| static void rcar_lvds_get_lvds_mode(struct rcar_lvds *lvds) |
| { |
| struct drm_display_info *info = &lvds->connector.display_info; |
| enum rcar_lvds_mode mode; |
| |
| /* |
| * There is no API yet to retrieve LVDS mode from a bridge, only panels |
| * are supported. |
| */ |
| if (!lvds->panel) |
| return; |
| |
| if (!info->num_bus_formats || !info->bus_formats) { |
| dev_err(lvds->dev, "no LVDS bus format reported\n"); |
| return; |
| } |
| |
| switch (info->bus_formats[0]) { |
| case MEDIA_BUS_FMT_RGB666_1X7X3_SPWG: |
| case MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA: |
| mode = RCAR_LVDS_MODE_JEIDA; |
| break; |
| case MEDIA_BUS_FMT_RGB888_1X7X4_SPWG: |
| mode = RCAR_LVDS_MODE_VESA; |
| break; |
| default: |
| dev_err(lvds->dev, "unsupported LVDS bus format 0x%04x\n", |
| info->bus_formats[0]); |
| return; |
| } |
| |
| if (info->bus_flags & DRM_BUS_FLAG_DATA_LSB_TO_MSB) |
| mode |= RCAR_LVDS_MODE_MIRROR; |
| |
| lvds->mode = mode; |
| } |
| |
| static void rcar_lvds_mode_set(struct drm_bridge *bridge, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge); |
| |
| WARN_ON(lvds->enabled); |
| |
| lvds->display_mode = *adjusted_mode; |
| |
| rcar_lvds_get_lvds_mode(lvds); |
| } |
| |
| static int rcar_lvds_attach(struct drm_bridge *bridge) |
| { |
| struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge); |
| struct drm_connector *connector = &lvds->connector; |
| struct drm_encoder *encoder = bridge->encoder; |
| int ret; |
| |
| /* If we have a next bridge just attach it. */ |
| if (lvds->next_bridge) |
| return drm_bridge_attach(bridge->encoder, lvds->next_bridge, |
| bridge); |
| |
| /* Otherwise we have a panel, create a connector. */ |
| ret = drm_connector_init(bridge->dev, connector, &rcar_lvds_conn_funcs, |
| DRM_MODE_CONNECTOR_LVDS); |
| if (ret < 0) |
| return ret; |
| |
| drm_connector_helper_add(connector, &rcar_lvds_conn_helper_funcs); |
| |
| ret = drm_connector_attach_encoder(connector, encoder); |
| if (ret < 0) |
| return ret; |
| |
| return drm_panel_attach(lvds->panel, connector); |
| } |
| |
| static void rcar_lvds_detach(struct drm_bridge *bridge) |
| { |
| struct rcar_lvds *lvds = bridge_to_rcar_lvds(bridge); |
| |
| if (lvds->panel) |
| drm_panel_detach(lvds->panel); |
| } |
| |
| static const struct drm_bridge_funcs rcar_lvds_bridge_ops = { |
| .attach = rcar_lvds_attach, |
| .detach = rcar_lvds_detach, |
| .enable = rcar_lvds_enable, |
| .disable = rcar_lvds_disable, |
| .mode_fixup = rcar_lvds_mode_fixup, |
| .mode_set = rcar_lvds_mode_set, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Probe & Remove |
| */ |
| |
| static int rcar_lvds_parse_dt(struct rcar_lvds *lvds) |
| { |
| struct device_node *local_output = NULL; |
| struct device_node *remote_input = NULL; |
| struct device_node *remote = NULL; |
| struct device_node *node; |
| bool is_bridge = false; |
| int ret = 0; |
| |
| local_output = of_graph_get_endpoint_by_regs(lvds->dev->of_node, 1, 0); |
| if (!local_output) { |
| dev_dbg(lvds->dev, "unconnected port@1\n"); |
| return -ENODEV; |
| } |
| |
| /* |
| * Locate the connected entity and infer its type from the number of |
| * endpoints. |
| */ |
| remote = of_graph_get_remote_port_parent(local_output); |
| if (!remote) { |
| dev_dbg(lvds->dev, "unconnected endpoint %pOF\n", local_output); |
| ret = -ENODEV; |
| goto done; |
| } |
| |
| if (!of_device_is_available(remote)) { |
| dev_dbg(lvds->dev, "connected entity %pOF is disabled\n", |
| remote); |
| ret = -ENODEV; |
| goto done; |
| } |
| |
| remote_input = of_graph_get_remote_endpoint(local_output); |
| |
| for_each_endpoint_of_node(remote, node) { |
| if (node != remote_input) { |
| /* |
| * We've found one endpoint other than the input, this |
| * must be a bridge. |
| */ |
| is_bridge = true; |
| of_node_put(node); |
| break; |
| } |
| } |
| |
| if (is_bridge) { |
| lvds->next_bridge = of_drm_find_bridge(remote); |
| if (!lvds->next_bridge) |
| ret = -EPROBE_DEFER; |
| } else { |
| lvds->panel = of_drm_find_panel(remote); |
| if (IS_ERR(lvds->panel)) |
| ret = PTR_ERR(lvds->panel); |
| } |
| |
| done: |
| of_node_put(local_output); |
| of_node_put(remote_input); |
| of_node_put(remote); |
| |
| return ret; |
| } |
| |
| static int rcar_lvds_probe(struct platform_device *pdev) |
| { |
| struct rcar_lvds *lvds; |
| struct resource *mem; |
| int ret; |
| |
| lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL); |
| if (lvds == NULL) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, lvds); |
| |
| lvds->dev = &pdev->dev; |
| lvds->info = of_device_get_match_data(&pdev->dev); |
| lvds->enabled = false; |
| |
| ret = rcar_lvds_parse_dt(lvds); |
| if (ret < 0) |
| return ret; |
| |
| lvds->bridge.driver_private = lvds; |
| lvds->bridge.funcs = &rcar_lvds_bridge_ops; |
| lvds->bridge.of_node = pdev->dev.of_node; |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| lvds->mmio = devm_ioremap_resource(&pdev->dev, mem); |
| if (IS_ERR(lvds->mmio)) |
| return PTR_ERR(lvds->mmio); |
| |
| lvds->clock = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(lvds->clock)) { |
| dev_err(&pdev->dev, "failed to get clock\n"); |
| return PTR_ERR(lvds->clock); |
| } |
| |
| drm_bridge_add(&lvds->bridge); |
| |
| return 0; |
| } |
| |
| static int rcar_lvds_remove(struct platform_device *pdev) |
| { |
| struct rcar_lvds *lvds = platform_get_drvdata(pdev); |
| |
| drm_bridge_remove(&lvds->bridge); |
| |
| return 0; |
| } |
| |
| static const struct rcar_lvds_device_info rcar_lvds_gen2_info = { |
| .gen = 2, |
| .quirks = RCAR_LVDS_QUIRK_GEN2_PLLCR, |
| }; |
| |
| static const struct rcar_lvds_device_info rcar_lvds_r8a7790_info = { |
| .gen = 2, |
| .quirks = RCAR_LVDS_QUIRK_GEN2_PLLCR | RCAR_LVDS_QUIRK_LANES, |
| }; |
| |
| static const struct rcar_lvds_device_info rcar_lvds_gen3_info = { |
| .gen = 3, |
| }; |
| |
| static const struct rcar_lvds_device_info rcar_lvds_r8a77970_info = { |
| .gen = 3, |
| .quirks = RCAR_LVDS_QUIRK_GEN2_PLLCR | RCAR_LVDS_QUIRK_GEN3_LVEN, |
| }; |
| |
| static const struct of_device_id rcar_lvds_of_table[] = { |
| { .compatible = "renesas,r8a7743-lvds", .data = &rcar_lvds_gen2_info }, |
| { .compatible = "renesas,r8a7790-lvds", .data = &rcar_lvds_r8a7790_info }, |
| { .compatible = "renesas,r8a7791-lvds", .data = &rcar_lvds_gen2_info }, |
| { .compatible = "renesas,r8a7793-lvds", .data = &rcar_lvds_gen2_info }, |
| { .compatible = "renesas,r8a7795-lvds", .data = &rcar_lvds_gen3_info }, |
| { .compatible = "renesas,r8a7796-lvds", .data = &rcar_lvds_gen3_info }, |
| { .compatible = "renesas,r8a77970-lvds", .data = &rcar_lvds_r8a77970_info }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(of, rcar_lvds_of_table); |
| |
| static struct platform_driver rcar_lvds_platform_driver = { |
| .probe = rcar_lvds_probe, |
| .remove = rcar_lvds_remove, |
| .driver = { |
| .name = "rcar-lvds", |
| .of_match_table = rcar_lvds_of_table, |
| }, |
| }; |
| |
| module_platform_driver(rcar_lvds_platform_driver); |
| |
| MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); |
| MODULE_DESCRIPTION("Renesas R-Car LVDS Encoder Driver"); |
| MODULE_LICENSE("GPL"); |