| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called COPYING. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. |
| * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| *****************************************************************************/ |
| |
| #ifndef __iwl_fw_file_h__ |
| #define __iwl_fw_file_h__ |
| |
| #include <linux/netdevice.h> |
| |
| /* v1/v2 uCode file layout */ |
| struct iwl_ucode_header { |
| __le32 ver; /* major/minor/API/serial */ |
| union { |
| struct { |
| __le32 inst_size; /* bytes of runtime code */ |
| __le32 data_size; /* bytes of runtime data */ |
| __le32 init_size; /* bytes of init code */ |
| __le32 init_data_size; /* bytes of init data */ |
| __le32 boot_size; /* bytes of bootstrap code */ |
| u8 data[0]; /* in same order as sizes */ |
| } v1; |
| struct { |
| __le32 build; /* build number */ |
| __le32 inst_size; /* bytes of runtime code */ |
| __le32 data_size; /* bytes of runtime data */ |
| __le32 init_size; /* bytes of init code */ |
| __le32 init_data_size; /* bytes of init data */ |
| __le32 boot_size; /* bytes of bootstrap code */ |
| u8 data[0]; /* in same order as sizes */ |
| } v2; |
| } u; |
| }; |
| |
| /* |
| * new TLV uCode file layout |
| * |
| * The new TLV file format contains TLVs, that each specify |
| * some piece of data. |
| */ |
| |
| enum iwl_ucode_tlv_type { |
| IWL_UCODE_TLV_INVALID = 0, /* unused */ |
| IWL_UCODE_TLV_INST = 1, |
| IWL_UCODE_TLV_DATA = 2, |
| IWL_UCODE_TLV_INIT = 3, |
| IWL_UCODE_TLV_INIT_DATA = 4, |
| IWL_UCODE_TLV_BOOT = 5, |
| IWL_UCODE_TLV_PROBE_MAX_LEN = 6, /* a u32 value */ |
| IWL_UCODE_TLV_PAN = 7, |
| IWL_UCODE_TLV_RUNT_EVTLOG_PTR = 8, |
| IWL_UCODE_TLV_RUNT_EVTLOG_SIZE = 9, |
| IWL_UCODE_TLV_RUNT_ERRLOG_PTR = 10, |
| IWL_UCODE_TLV_INIT_EVTLOG_PTR = 11, |
| IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12, |
| IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13, |
| IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14, |
| IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15, |
| IWL_UCODE_TLV_WOWLAN_INST = 16, |
| IWL_UCODE_TLV_WOWLAN_DATA = 17, |
| IWL_UCODE_TLV_FLAGS = 18, |
| IWL_UCODE_TLV_SEC_RT = 19, |
| IWL_UCODE_TLV_SEC_INIT = 20, |
| IWL_UCODE_TLV_SEC_WOWLAN = 21, |
| IWL_UCODE_TLV_DEF_CALIB = 22, |
| IWL_UCODE_TLV_PHY_SKU = 23, |
| IWL_UCODE_TLV_SECURE_SEC_RT = 24, |
| IWL_UCODE_TLV_SECURE_SEC_INIT = 25, |
| IWL_UCODE_TLV_SECURE_SEC_WOWLAN = 26, |
| IWL_UCODE_TLV_NUM_OF_CPU = 27, |
| IWL_UCODE_TLV_CSCHEME = 28, |
| IWL_UCODE_TLV_API_CHANGES_SET = 29, |
| IWL_UCODE_TLV_ENABLED_CAPABILITIES = 30, |
| IWL_UCODE_TLV_N_SCAN_CHANNELS = 31, |
| IWL_UCODE_TLV_SEC_RT_USNIFFER = 34, |
| IWL_UCODE_TLV_FW_DBG_DEST = 38, |
| IWL_UCODE_TLV_FW_DBG_CONF = 39, |
| }; |
| |
| struct iwl_ucode_tlv { |
| __le32 type; /* see above */ |
| __le32 length; /* not including type/length fields */ |
| u8 data[0]; |
| }; |
| |
| #define IWL_TLV_UCODE_MAGIC 0x0a4c5749 |
| #define FW_VER_HUMAN_READABLE_SZ 64 |
| |
| struct iwl_tlv_ucode_header { |
| /* |
| * The TLV style ucode header is distinguished from |
| * the v1/v2 style header by first four bytes being |
| * zero, as such is an invalid combination of |
| * major/minor/API/serial versions. |
| */ |
| __le32 zero; |
| __le32 magic; |
| u8 human_readable[FW_VER_HUMAN_READABLE_SZ]; |
| __le32 ver; /* major/minor/API/serial */ |
| __le32 build; |
| __le64 ignore; |
| /* |
| * The data contained herein has a TLV layout, |
| * see above for the TLV header and types. |
| * Note that each TLV is padded to a length |
| * that is a multiple of 4 for alignment. |
| */ |
| u8 data[0]; |
| }; |
| |
| /* |
| * ucode TLVs |
| * |
| * ability to get extension for: flags & capabilities from ucode binaries files |
| */ |
| struct iwl_ucode_api { |
| __le32 api_index; |
| __le32 api_flags; |
| } __packed; |
| |
| struct iwl_ucode_capa { |
| __le32 api_index; |
| __le32 api_capa; |
| } __packed; |
| |
| /** |
| * enum iwl_ucode_tlv_flag - ucode API flags |
| * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously |
| * was a separate TLV but moved here to save space. |
| * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID, |
| * treats good CRC threshold as a boolean |
| * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w). |
| * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P. |
| * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS |
| * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD |
| * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan |
| * offload profile config command. |
| * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six |
| * (rather than two) IPv6 addresses |
| * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element |
| * from the probe request template. |
| * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version) |
| * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version) |
| * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC |
| * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and |
| * P2P client interfaces simultaneously if they are in different bindings. |
| * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and |
| * P2P client interfaces simultaneously if they are in same bindings. |
| * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD |
| * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save |
| * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering. |
| * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients |
| * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS. |
| */ |
| enum iwl_ucode_tlv_flag { |
| IWL_UCODE_TLV_FLAGS_PAN = BIT(0), |
| IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1), |
| IWL_UCODE_TLV_FLAGS_MFP = BIT(2), |
| IWL_UCODE_TLV_FLAGS_P2P = BIT(3), |
| IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4), |
| IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7), |
| IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10), |
| IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12), |
| IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15), |
| IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16), |
| IWL_UCODE_TLV_FLAGS_P2P_PM = BIT(21), |
| IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22), |
| IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM = BIT(23), |
| IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24), |
| IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25), |
| IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26), |
| IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29), |
| IWL_UCODE_TLV_FLAGS_GO_UAPSD = BIT(30), |
| }; |
| |
| /** |
| * enum iwl_ucode_tlv_api - ucode api |
| * @IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID: wowlan config includes tid field. |
| * @IWL_UCODE_TLV_CAPA_EXTENDED_BEACON: Support Extended beacon notification |
| * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex |
| * @IWL_UCODE_TLV_API_CSA_FLOW: ucode can do unbind-bind flow for CSA. |
| * @IWL_UCODE_TLV_API_DISABLE_STA_TX: ucode supports tx_disable bit. |
| * @IWL_UCODE_TLV_API_LMAC_SCAN: This ucode uses LMAC unified scan API. |
| * @IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF: ucode supports disabling dummy notif. |
| * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time |
| * longer than the passive one, which is essential for fragmented scan. |
| * @IWL_UCODE_TLV_API_BASIC_DWELL: use only basic dwell time in scan command, |
| * regardless of the band or the number of the probes. FW will calculate |
| * the actual dwell time. |
| * @IWL_UCODE_TLV_API_SINGLE_SCAN_EBS: EBS is supported for single scans too. |
| */ |
| enum iwl_ucode_tlv_api { |
| IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID = BIT(0), |
| IWL_UCODE_TLV_CAPA_EXTENDED_BEACON = BIT(1), |
| IWL_UCODE_TLV_API_BT_COEX_SPLIT = BIT(3), |
| IWL_UCODE_TLV_API_CSA_FLOW = BIT(4), |
| IWL_UCODE_TLV_API_DISABLE_STA_TX = BIT(5), |
| IWL_UCODE_TLV_API_LMAC_SCAN = BIT(6), |
| IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF = BIT(7), |
| IWL_UCODE_TLV_API_FRAGMENTED_SCAN = BIT(8), |
| IWL_UCODE_TLV_API_BASIC_DWELL = BIT(13), |
| IWL_UCODE_TLV_API_SINGLE_SCAN_EBS = BIT(16), |
| }; |
| |
| /** |
| * enum iwl_ucode_tlv_capa - ucode capabilities |
| * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3 |
| * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory |
| * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan. |
| * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality |
| * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current |
| * tx power value into TPC Report action frame and Link Measurement Report |
| * action frame |
| * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current |
| * channel in DS parameter set element in probe requests. |
| * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in |
| * probe requests. |
| * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests |
| * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA), |
| * which also implies support for the scheduler configuration command |
| * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching |
| * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command |
| */ |
| enum iwl_ucode_tlv_capa { |
| IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = BIT(0), |
| IWL_UCODE_TLV_CAPA_LAR_SUPPORT = BIT(1), |
| IWL_UCODE_TLV_CAPA_UMAC_SCAN = BIT(2), |
| IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = BIT(6), |
| IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = BIT(8), |
| IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = BIT(9), |
| IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = BIT(10), |
| IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = BIT(11), |
| IWL_UCODE_TLV_CAPA_DQA_SUPPORT = BIT(12), |
| IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = BIT(13), |
| IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = BIT(18), |
| }; |
| |
| /* The default calibrate table size if not specified by firmware file */ |
| #define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18 |
| #define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19 |
| #define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253 |
| |
| /* The default max probe length if not specified by the firmware file */ |
| #define IWL_DEFAULT_MAX_PROBE_LENGTH 200 |
| |
| /* |
| * For 16.0 uCode and above, there is no differentiation between sections, |
| * just an offset to the HW address. |
| */ |
| #define IWL_UCODE_SECTION_MAX 12 |
| #define IWL_API_ARRAY_SIZE 1 |
| #define IWL_CAPABILITIES_ARRAY_SIZE 1 |
| #define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC |
| |
| /* uCode version contains 4 values: Major/Minor/API/Serial */ |
| #define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24) |
| #define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16) |
| #define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8) |
| #define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF) |
| |
| /* |
| * Calibration control struct. |
| * Sent as part of the phy configuration command. |
| * @flow_trigger: bitmap for which calibrations to perform according to |
| * flow triggers. |
| * @event_trigger: bitmap for which calibrations to perform according to |
| * event triggers. |
| */ |
| struct iwl_tlv_calib_ctrl { |
| __le32 flow_trigger; |
| __le32 event_trigger; |
| } __packed; |
| |
| enum iwl_fw_phy_cfg { |
| FW_PHY_CFG_RADIO_TYPE_POS = 0, |
| FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS, |
| FW_PHY_CFG_RADIO_STEP_POS = 2, |
| FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS, |
| FW_PHY_CFG_RADIO_DASH_POS = 4, |
| FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS, |
| FW_PHY_CFG_TX_CHAIN_POS = 16, |
| FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS, |
| FW_PHY_CFG_RX_CHAIN_POS = 20, |
| FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS, |
| }; |
| |
| #define IWL_UCODE_MAX_CS 1 |
| |
| /** |
| * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW. |
| * @cipher: a cipher suite selector |
| * @flags: cipher scheme flags (currently reserved for a future use) |
| * @hdr_len: a size of MPDU security header |
| * @pn_len: a size of PN |
| * @pn_off: an offset of pn from the beginning of the security header |
| * @key_idx_off: an offset of key index byte in the security header |
| * @key_idx_mask: a bit mask of key_idx bits |
| * @key_idx_shift: bit shift needed to get key_idx |
| * @mic_len: mic length in bytes |
| * @hw_cipher: a HW cipher index used in host commands |
| */ |
| struct iwl_fw_cipher_scheme { |
| __le32 cipher; |
| u8 flags; |
| u8 hdr_len; |
| u8 pn_len; |
| u8 pn_off; |
| u8 key_idx_off; |
| u8 key_idx_mask; |
| u8 key_idx_shift; |
| u8 mic_len; |
| u8 hw_cipher; |
| } __packed; |
| |
| enum iwl_fw_dbg_reg_operator { |
| CSR_ASSIGN, |
| CSR_SETBIT, |
| CSR_CLEARBIT, |
| |
| PRPH_ASSIGN, |
| PRPH_SETBIT, |
| PRPH_CLEARBIT, |
| }; |
| |
| /** |
| * struct iwl_fw_dbg_reg_op - an operation on a register |
| * |
| * @op: %enum iwl_fw_dbg_reg_operator |
| * @addr: offset of the register |
| * @val: value |
| */ |
| struct iwl_fw_dbg_reg_op { |
| u8 op; |
| u8 reserved[3]; |
| __le32 addr; |
| __le32 val; |
| } __packed; |
| |
| /** |
| * enum iwl_fw_dbg_monitor_mode - available monitor recording modes |
| * |
| * @SMEM_MODE: monitor stores the data in SMEM |
| * @EXTERNAL_MODE: monitor stores the data in allocated DRAM |
| * @MARBH_MODE: monitor stores the data in MARBH buffer |
| */ |
| enum iwl_fw_dbg_monitor_mode { |
| SMEM_MODE = 0, |
| EXTERNAL_MODE = 1, |
| MARBH_MODE = 2, |
| }; |
| |
| /** |
| * struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data |
| * |
| * @version: version of the TLV - currently 0 |
| * @monitor_mode: %enum iwl_fw_dbg_monitor_mode |
| * @base_reg: addr of the base addr register (PRPH) |
| * @end_reg: addr of the end addr register (PRPH) |
| * @write_ptr_reg: the addr of the reg of the write pointer |
| * @wrap_count: the addr of the reg of the wrap_count |
| * @base_shift: shift right of the base addr reg |
| * @end_shift: shift right of the end addr reg |
| * @reg_ops: array of registers operations |
| * |
| * This parses IWL_UCODE_TLV_FW_DBG_DEST |
| */ |
| struct iwl_fw_dbg_dest_tlv { |
| u8 version; |
| u8 monitor_mode; |
| u8 reserved[2]; |
| __le32 base_reg; |
| __le32 end_reg; |
| __le32 write_ptr_reg; |
| __le32 wrap_count; |
| u8 base_shift; |
| u8 end_shift; |
| struct iwl_fw_dbg_reg_op reg_ops[0]; |
| } __packed; |
| |
| struct iwl_fw_dbg_conf_hcmd { |
| u8 id; |
| u8 reserved; |
| __le16 len; |
| u8 data[0]; |
| } __packed; |
| |
| /** |
| * struct iwl_fw_dbg_trigger - a TLV that describes a debug configuration |
| * |
| * @enabled: is this trigger enabled |
| * @reserved: |
| * @len: length, in bytes, of the %trigger field |
| * @trigger: pointer to a trigger struct |
| */ |
| struct iwl_fw_dbg_trigger { |
| u8 enabled; |
| u8 reserved; |
| u8 len; |
| u8 trigger[0]; |
| } __packed; |
| |
| /** |
| * enum iwl_fw_dbg_conf - configurations available |
| * |
| * @FW_DBG_CUSTOM: take this configuration from alive |
| * Note that the trigger is NO-OP for this configuration |
| */ |
| enum iwl_fw_dbg_conf { |
| FW_DBG_CUSTOM = 0, |
| |
| /* must be last */ |
| FW_DBG_MAX, |
| FW_DBG_INVALID = 0xff, |
| }; |
| |
| /** |
| * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration |
| * |
| * @id: %enum iwl_fw_dbg_conf |
| * @usniffer: should the uSniffer image be used |
| * @num_of_hcmds: how many HCMDs to send are present here |
| * @hcmd: a variable length host command to be sent to apply the configuration. |
| * If there is more than one HCMD to send, they will appear one after the |
| * other and be sent in the order that they appear in. |
| * This parses IWL_UCODE_TLV_FW_DBG_CONF |
| */ |
| struct iwl_fw_dbg_conf_tlv { |
| u8 id; |
| u8 usniffer; |
| u8 reserved; |
| u8 num_of_hcmds; |
| struct iwl_fw_dbg_conf_hcmd hcmd; |
| |
| /* struct iwl_fw_dbg_trigger sits after all variable length hcmds */ |
| } __packed; |
| |
| #endif /* __iwl_fw_file_h__ */ |