| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * imx214.c - imx214 sensor driver |
| * |
| * Copyright 2018 Qtechnology A/S |
| * |
| * Ricardo Ribalda <ribalda@kernel.org> |
| */ |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <media/media-entity.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-fwnode.h> |
| #include <media/v4l2-subdev.h> |
| |
| #define IMX214_DEFAULT_CLK_FREQ 24000000 |
| #define IMX214_DEFAULT_LINK_FREQ 480000000 |
| #define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10) |
| #define IMX214_FPS 30 |
| #define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10 |
| |
| static const char * const imx214_supply_name[] = { |
| "vdda", |
| "vddd", |
| "vdddo", |
| }; |
| |
| #define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name) |
| |
| struct imx214 { |
| struct device *dev; |
| struct clk *xclk; |
| struct regmap *regmap; |
| |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_mbus_framefmt fmt; |
| struct v4l2_rect crop; |
| |
| struct v4l2_ctrl_handler ctrls; |
| struct v4l2_ctrl *pixel_rate; |
| struct v4l2_ctrl *link_freq; |
| struct v4l2_ctrl *exposure; |
| struct v4l2_ctrl *unit_size; |
| |
| struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES]; |
| |
| struct gpio_desc *enable_gpio; |
| |
| /* |
| * Serialize control access, get/set format, get selection |
| * and start streaming. |
| */ |
| struct mutex mutex; |
| }; |
| |
| struct reg_8 { |
| u16 addr; |
| u8 val; |
| }; |
| |
| enum { |
| IMX214_TABLE_WAIT_MS = 0, |
| IMX214_TABLE_END, |
| IMX214_MAX_RETRIES, |
| IMX214_WAIT_MS |
| }; |
| |
| /*From imx214_mode_tbls.h*/ |
| static const struct reg_8 mode_4096x2304[] = { |
| {0x0114, 0x03}, |
| {0x0220, 0x00}, |
| {0x0221, 0x11}, |
| {0x0222, 0x01}, |
| {0x0340, 0x0C}, |
| {0x0341, 0x7A}, |
| {0x0342, 0x13}, |
| {0x0343, 0x90}, |
| {0x0344, 0x00}, |
| {0x0345, 0x38}, |
| {0x0346, 0x01}, |
| {0x0347, 0x98}, |
| {0x0348, 0x10}, |
| {0x0349, 0x37}, |
| {0x034A, 0x0A}, |
| {0x034B, 0x97}, |
| {0x0381, 0x01}, |
| {0x0383, 0x01}, |
| {0x0385, 0x01}, |
| {0x0387, 0x01}, |
| {0x0900, 0x00}, |
| {0x0901, 0x00}, |
| {0x0902, 0x00}, |
| {0x3000, 0x35}, |
| {0x3054, 0x01}, |
| {0x305C, 0x11}, |
| |
| {0x0112, 0x0A}, |
| {0x0113, 0x0A}, |
| {0x034C, 0x10}, |
| {0x034D, 0x00}, |
| {0x034E, 0x09}, |
| {0x034F, 0x00}, |
| {0x0401, 0x00}, |
| {0x0404, 0x00}, |
| {0x0405, 0x10}, |
| {0x0408, 0x00}, |
| {0x0409, 0x00}, |
| {0x040A, 0x00}, |
| {0x040B, 0x00}, |
| {0x040C, 0x10}, |
| {0x040D, 0x00}, |
| {0x040E, 0x09}, |
| {0x040F, 0x00}, |
| |
| {0x0301, 0x05}, |
| {0x0303, 0x02}, |
| {0x0305, 0x03}, |
| {0x0306, 0x00}, |
| {0x0307, 0x96}, |
| {0x0309, 0x0A}, |
| {0x030B, 0x01}, |
| {0x0310, 0x00}, |
| |
| {0x0820, 0x12}, |
| {0x0821, 0xC0}, |
| {0x0822, 0x00}, |
| {0x0823, 0x00}, |
| |
| {0x3A03, 0x09}, |
| {0x3A04, 0x50}, |
| {0x3A05, 0x01}, |
| |
| {0x0B06, 0x01}, |
| {0x30A2, 0x00}, |
| |
| {0x30B4, 0x00}, |
| |
| {0x3A02, 0xFF}, |
| |
| {0x3011, 0x00}, |
| {0x3013, 0x01}, |
| |
| {0x0202, 0x0C}, |
| {0x0203, 0x70}, |
| {0x0224, 0x01}, |
| {0x0225, 0xF4}, |
| |
| {0x0204, 0x00}, |
| {0x0205, 0x00}, |
| {0x020E, 0x01}, |
| {0x020F, 0x00}, |
| {0x0210, 0x01}, |
| {0x0211, 0x00}, |
| {0x0212, 0x01}, |
| {0x0213, 0x00}, |
| {0x0214, 0x01}, |
| {0x0215, 0x00}, |
| {0x0216, 0x00}, |
| {0x0217, 0x00}, |
| |
| {0x4170, 0x00}, |
| {0x4171, 0x10}, |
| {0x4176, 0x00}, |
| {0x4177, 0x3C}, |
| {0xAE20, 0x04}, |
| {0xAE21, 0x5C}, |
| |
| {IMX214_TABLE_WAIT_MS, 10}, |
| {0x0138, 0x01}, |
| {IMX214_TABLE_END, 0x00} |
| }; |
| |
| static const struct reg_8 mode_1920x1080[] = { |
| {0x0114, 0x03}, |
| {0x0220, 0x00}, |
| {0x0221, 0x11}, |
| {0x0222, 0x01}, |
| {0x0340, 0x0C}, |
| {0x0341, 0x7A}, |
| {0x0342, 0x13}, |
| {0x0343, 0x90}, |
| {0x0344, 0x04}, |
| {0x0345, 0x78}, |
| {0x0346, 0x03}, |
| {0x0347, 0xFC}, |
| {0x0348, 0x0B}, |
| {0x0349, 0xF7}, |
| {0x034A, 0x08}, |
| {0x034B, 0x33}, |
| {0x0381, 0x01}, |
| {0x0383, 0x01}, |
| {0x0385, 0x01}, |
| {0x0387, 0x01}, |
| {0x0900, 0x00}, |
| {0x0901, 0x00}, |
| {0x0902, 0x00}, |
| {0x3000, 0x35}, |
| {0x3054, 0x01}, |
| {0x305C, 0x11}, |
| |
| {0x0112, 0x0A}, |
| {0x0113, 0x0A}, |
| {0x034C, 0x07}, |
| {0x034D, 0x80}, |
| {0x034E, 0x04}, |
| {0x034F, 0x38}, |
| {0x0401, 0x00}, |
| {0x0404, 0x00}, |
| {0x0405, 0x10}, |
| {0x0408, 0x00}, |
| {0x0409, 0x00}, |
| {0x040A, 0x00}, |
| {0x040B, 0x00}, |
| {0x040C, 0x07}, |
| {0x040D, 0x80}, |
| {0x040E, 0x04}, |
| {0x040F, 0x38}, |
| |
| {0x0301, 0x05}, |
| {0x0303, 0x02}, |
| {0x0305, 0x03}, |
| {0x0306, 0x00}, |
| {0x0307, 0x96}, |
| {0x0309, 0x0A}, |
| {0x030B, 0x01}, |
| {0x0310, 0x00}, |
| |
| {0x0820, 0x12}, |
| {0x0821, 0xC0}, |
| {0x0822, 0x00}, |
| {0x0823, 0x00}, |
| |
| {0x3A03, 0x04}, |
| {0x3A04, 0xF8}, |
| {0x3A05, 0x02}, |
| |
| {0x0B06, 0x01}, |
| {0x30A2, 0x00}, |
| |
| {0x30B4, 0x00}, |
| |
| {0x3A02, 0xFF}, |
| |
| {0x3011, 0x00}, |
| {0x3013, 0x01}, |
| |
| {0x0202, 0x0C}, |
| {0x0203, 0x70}, |
| {0x0224, 0x01}, |
| {0x0225, 0xF4}, |
| |
| {0x0204, 0x00}, |
| {0x0205, 0x00}, |
| {0x020E, 0x01}, |
| {0x020F, 0x00}, |
| {0x0210, 0x01}, |
| {0x0211, 0x00}, |
| {0x0212, 0x01}, |
| {0x0213, 0x00}, |
| {0x0214, 0x01}, |
| {0x0215, 0x00}, |
| {0x0216, 0x00}, |
| {0x0217, 0x00}, |
| |
| {0x4170, 0x00}, |
| {0x4171, 0x10}, |
| {0x4176, 0x00}, |
| {0x4177, 0x3C}, |
| {0xAE20, 0x04}, |
| {0xAE21, 0x5C}, |
| |
| {IMX214_TABLE_WAIT_MS, 10}, |
| {0x0138, 0x01}, |
| {IMX214_TABLE_END, 0x00} |
| }; |
| |
| static const struct reg_8 mode_table_common[] = { |
| /* software reset */ |
| |
| /* software standby settings */ |
| {0x0100, 0x00}, |
| |
| /* ATR setting */ |
| {0x9300, 0x02}, |
| |
| /* external clock setting */ |
| {0x0136, 0x18}, |
| {0x0137, 0x00}, |
| |
| /* global setting */ |
| /* basic config */ |
| {0x0101, 0x00}, |
| {0x0105, 0x01}, |
| {0x0106, 0x01}, |
| {0x4550, 0x02}, |
| {0x4601, 0x00}, |
| {0x4642, 0x05}, |
| {0x6227, 0x11}, |
| {0x6276, 0x00}, |
| {0x900E, 0x06}, |
| {0xA802, 0x90}, |
| {0xA803, 0x11}, |
| {0xA804, 0x62}, |
| {0xA805, 0x77}, |
| {0xA806, 0xAE}, |
| {0xA807, 0x34}, |
| {0xA808, 0xAE}, |
| {0xA809, 0x35}, |
| {0xA80A, 0x62}, |
| {0xA80B, 0x83}, |
| {0xAE33, 0x00}, |
| |
| /* analog setting */ |
| {0x4174, 0x00}, |
| {0x4175, 0x11}, |
| {0x4612, 0x29}, |
| {0x461B, 0x12}, |
| {0x461F, 0x06}, |
| {0x4635, 0x07}, |
| {0x4637, 0x30}, |
| {0x463F, 0x18}, |
| {0x4641, 0x0D}, |
| {0x465B, 0x12}, |
| {0x465F, 0x11}, |
| {0x4663, 0x11}, |
| {0x4667, 0x0F}, |
| {0x466F, 0x0F}, |
| {0x470E, 0x09}, |
| {0x4909, 0xAB}, |
| {0x490B, 0x95}, |
| {0x4915, 0x5D}, |
| {0x4A5F, 0xFF}, |
| {0x4A61, 0xFF}, |
| {0x4A73, 0x62}, |
| {0x4A85, 0x00}, |
| {0x4A87, 0xFF}, |
| |
| /* embedded data */ |
| {0x5041, 0x04}, |
| {0x583C, 0x04}, |
| {0x620E, 0x04}, |
| {0x6EB2, 0x01}, |
| {0x6EB3, 0x00}, |
| {0x9300, 0x02}, |
| |
| /* imagequality */ |
| /* HDR setting */ |
| {0x3001, 0x07}, |
| {0x6D12, 0x3F}, |
| {0x6D13, 0xFF}, |
| {0x9344, 0x03}, |
| {0x9706, 0x10}, |
| {0x9707, 0x03}, |
| {0x9708, 0x03}, |
| {0x9E04, 0x01}, |
| {0x9E05, 0x00}, |
| {0x9E0C, 0x01}, |
| {0x9E0D, 0x02}, |
| {0x9E24, 0x00}, |
| {0x9E25, 0x8C}, |
| {0x9E26, 0x00}, |
| {0x9E27, 0x94}, |
| {0x9E28, 0x00}, |
| {0x9E29, 0x96}, |
| |
| /* CNR parameter setting */ |
| {0x69DB, 0x01}, |
| |
| /* Moire reduction */ |
| {0x6957, 0x01}, |
| |
| /* image enhancement */ |
| {0x6987, 0x17}, |
| {0x698A, 0x03}, |
| {0x698B, 0x03}, |
| |
| /* white balanace */ |
| {0x0B8E, 0x01}, |
| {0x0B8F, 0x00}, |
| {0x0B90, 0x01}, |
| {0x0B91, 0x00}, |
| {0x0B92, 0x01}, |
| {0x0B93, 0x00}, |
| {0x0B94, 0x01}, |
| {0x0B95, 0x00}, |
| |
| /* ATR setting */ |
| {0x6E50, 0x00}, |
| {0x6E51, 0x32}, |
| {0x9340, 0x00}, |
| {0x9341, 0x3C}, |
| {0x9342, 0x03}, |
| {0x9343, 0xFF}, |
| {IMX214_TABLE_END, 0x00} |
| }; |
| |
| /* |
| * Declare modes in order, from biggest |
| * to smallest height. |
| */ |
| static const struct imx214_mode { |
| u32 width; |
| u32 height; |
| const struct reg_8 *reg_table; |
| } imx214_modes[] = { |
| { |
| .width = 4096, |
| .height = 2304, |
| .reg_table = mode_4096x2304, |
| }, |
| { |
| .width = 1920, |
| .height = 1080, |
| .reg_table = mode_1920x1080, |
| }, |
| }; |
| |
| static inline struct imx214 *to_imx214(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct imx214, sd); |
| } |
| |
| static int __maybe_unused imx214_power_on(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct imx214 *imx214 = to_imx214(sd); |
| int ret; |
| |
| ret = regulator_bulk_enable(IMX214_NUM_SUPPLIES, imx214->supplies); |
| if (ret < 0) { |
| dev_err(imx214->dev, "failed to enable regulators: %d\n", ret); |
| return ret; |
| } |
| |
| usleep_range(2000, 3000); |
| |
| ret = clk_prepare_enable(imx214->xclk); |
| if (ret < 0) { |
| regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies); |
| dev_err(imx214->dev, "clk prepare enable failed\n"); |
| return ret; |
| } |
| |
| gpiod_set_value_cansleep(imx214->enable_gpio, 1); |
| usleep_range(12000, 15000); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused imx214_power_off(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct imx214 *imx214 = to_imx214(sd); |
| |
| gpiod_set_value_cansleep(imx214->enable_gpio, 0); |
| |
| clk_disable_unprepare(imx214->xclk); |
| |
| regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies); |
| usleep_range(10, 20); |
| |
| return 0; |
| } |
| |
| static int imx214_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->index > 0) |
| return -EINVAL; |
| |
| code->code = IMX214_MBUS_CODE; |
| |
| return 0; |
| } |
| |
| static int imx214_enum_frame_size(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| if (fse->code != IMX214_MBUS_CODE) |
| return -EINVAL; |
| |
| if (fse->index >= ARRAY_SIZE(imx214_modes)) |
| return -EINVAL; |
| |
| fse->min_width = fse->max_width = imx214_modes[fse->index].width; |
| fse->min_height = fse->max_height = imx214_modes[fse->index].height; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int imx214_s_register(struct v4l2_subdev *subdev, |
| const struct v4l2_dbg_register *reg) |
| { |
| struct imx214 *imx214 = container_of(subdev, struct imx214, sd); |
| |
| return regmap_write(imx214->regmap, reg->reg, reg->val); |
| } |
| |
| static int imx214_g_register(struct v4l2_subdev *subdev, |
| struct v4l2_dbg_register *reg) |
| { |
| struct imx214 *imx214 = container_of(subdev, struct imx214, sd); |
| unsigned int aux; |
| int ret; |
| |
| reg->size = 1; |
| ret = regmap_read(imx214->regmap, reg->reg, &aux); |
| reg->val = aux; |
| |
| return ret; |
| } |
| #endif |
| |
| static const struct v4l2_subdev_core_ops imx214_core_ops = { |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = imx214_g_register, |
| .s_register = imx214_s_register, |
| #endif |
| }; |
| |
| static struct v4l2_mbus_framefmt * |
| __imx214_get_pad_format(struct imx214 *imx214, |
| struct v4l2_subdev_state *sd_state, |
| unsigned int pad, |
| enum v4l2_subdev_format_whence which) |
| { |
| switch (which) { |
| case V4L2_SUBDEV_FORMAT_TRY: |
| return v4l2_subdev_get_try_format(&imx214->sd, sd_state, pad); |
| case V4L2_SUBDEV_FORMAT_ACTIVE: |
| return &imx214->fmt; |
| default: |
| return NULL; |
| } |
| } |
| |
| static int imx214_get_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *format) |
| { |
| struct imx214 *imx214 = to_imx214(sd); |
| |
| mutex_lock(&imx214->mutex); |
| format->format = *__imx214_get_pad_format(imx214, sd_state, |
| format->pad, |
| format->which); |
| mutex_unlock(&imx214->mutex); |
| |
| return 0; |
| } |
| |
| static struct v4l2_rect * |
| __imx214_get_pad_crop(struct imx214 *imx214, |
| struct v4l2_subdev_state *sd_state, |
| unsigned int pad, enum v4l2_subdev_format_whence which) |
| { |
| switch (which) { |
| case V4L2_SUBDEV_FORMAT_TRY: |
| return v4l2_subdev_get_try_crop(&imx214->sd, sd_state, pad); |
| case V4L2_SUBDEV_FORMAT_ACTIVE: |
| return &imx214->crop; |
| default: |
| return NULL; |
| } |
| } |
| |
| static int imx214_set_format(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *format) |
| { |
| struct imx214 *imx214 = to_imx214(sd); |
| struct v4l2_mbus_framefmt *__format; |
| struct v4l2_rect *__crop; |
| const struct imx214_mode *mode; |
| |
| mutex_lock(&imx214->mutex); |
| |
| __crop = __imx214_get_pad_crop(imx214, sd_state, format->pad, |
| format->which); |
| |
| mode = v4l2_find_nearest_size(imx214_modes, |
| ARRAY_SIZE(imx214_modes), width, height, |
| format->format.width, |
| format->format.height); |
| |
| __crop->width = mode->width; |
| __crop->height = mode->height; |
| |
| __format = __imx214_get_pad_format(imx214, sd_state, format->pad, |
| format->which); |
| __format->width = __crop->width; |
| __format->height = __crop->height; |
| __format->code = IMX214_MBUS_CODE; |
| __format->field = V4L2_FIELD_NONE; |
| __format->colorspace = V4L2_COLORSPACE_SRGB; |
| __format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace); |
| __format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true, |
| __format->colorspace, __format->ycbcr_enc); |
| __format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace); |
| |
| format->format = *__format; |
| |
| mutex_unlock(&imx214->mutex); |
| |
| return 0; |
| } |
| |
| static int imx214_get_selection(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_selection *sel) |
| { |
| struct imx214 *imx214 = to_imx214(sd); |
| |
| if (sel->target != V4L2_SEL_TGT_CROP) |
| return -EINVAL; |
| |
| mutex_lock(&imx214->mutex); |
| sel->r = *__imx214_get_pad_crop(imx214, sd_state, sel->pad, |
| sel->which); |
| mutex_unlock(&imx214->mutex); |
| return 0; |
| } |
| |
| static int imx214_entity_init_cfg(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_state *sd_state) |
| { |
| struct v4l2_subdev_format fmt = { }; |
| |
| fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; |
| fmt.format.width = imx214_modes[0].width; |
| fmt.format.height = imx214_modes[0].height; |
| |
| imx214_set_format(subdev, sd_state, &fmt); |
| |
| return 0; |
| } |
| |
| static int imx214_set_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct imx214 *imx214 = container_of(ctrl->handler, |
| struct imx214, ctrls); |
| u8 vals[2]; |
| int ret; |
| |
| /* |
| * Applying V4L2 control value only happens |
| * when power is up for streaming |
| */ |
| if (!pm_runtime_get_if_in_use(imx214->dev)) |
| return 0; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_EXPOSURE: |
| vals[1] = ctrl->val; |
| vals[0] = ctrl->val >> 8; |
| ret = regmap_bulk_write(imx214->regmap, 0x202, vals, 2); |
| if (ret < 0) |
| dev_err(imx214->dev, "Error %d\n", ret); |
| ret = 0; |
| break; |
| |
| default: |
| ret = -EINVAL; |
| } |
| |
| pm_runtime_put(imx214->dev); |
| |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops imx214_ctrl_ops = { |
| .s_ctrl = imx214_set_ctrl, |
| }; |
| |
| #define MAX_CMD 4 |
| static int imx214_write_table(struct imx214 *imx214, |
| const struct reg_8 table[]) |
| { |
| u8 vals[MAX_CMD]; |
| int i; |
| int ret; |
| |
| for (; table->addr != IMX214_TABLE_END ; table++) { |
| if (table->addr == IMX214_TABLE_WAIT_MS) { |
| usleep_range(table->val * 1000, |
| table->val * 1000 + 500); |
| continue; |
| } |
| |
| for (i = 0; i < MAX_CMD; i++) { |
| if (table[i].addr != (table[0].addr + i)) |
| break; |
| vals[i] = table[i].val; |
| } |
| |
| ret = regmap_bulk_write(imx214->regmap, table->addr, vals, i); |
| |
| if (ret) { |
| dev_err(imx214->dev, "write_table error: %d\n", ret); |
| return ret; |
| } |
| |
| table += i - 1; |
| } |
| |
| return 0; |
| } |
| |
| static int imx214_start_streaming(struct imx214 *imx214) |
| { |
| const struct imx214_mode *mode; |
| int ret; |
| |
| mutex_lock(&imx214->mutex); |
| ret = imx214_write_table(imx214, mode_table_common); |
| if (ret < 0) { |
| dev_err(imx214->dev, "could not sent common table %d\n", ret); |
| goto error; |
| } |
| |
| mode = v4l2_find_nearest_size(imx214_modes, |
| ARRAY_SIZE(imx214_modes), width, height, |
| imx214->fmt.width, imx214->fmt.height); |
| ret = imx214_write_table(imx214, mode->reg_table); |
| if (ret < 0) { |
| dev_err(imx214->dev, "could not sent mode table %d\n", ret); |
| goto error; |
| } |
| ret = __v4l2_ctrl_handler_setup(&imx214->ctrls); |
| if (ret < 0) { |
| dev_err(imx214->dev, "could not sync v4l2 controls\n"); |
| goto error; |
| } |
| ret = regmap_write(imx214->regmap, 0x100, 1); |
| if (ret < 0) { |
| dev_err(imx214->dev, "could not sent start table %d\n", ret); |
| goto error; |
| } |
| |
| mutex_unlock(&imx214->mutex); |
| return 0; |
| |
| error: |
| mutex_unlock(&imx214->mutex); |
| return ret; |
| } |
| |
| static int imx214_stop_streaming(struct imx214 *imx214) |
| { |
| int ret; |
| |
| ret = regmap_write(imx214->regmap, 0x100, 0); |
| if (ret < 0) |
| dev_err(imx214->dev, "could not sent stop table %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int imx214_s_stream(struct v4l2_subdev *subdev, int enable) |
| { |
| struct imx214 *imx214 = to_imx214(subdev); |
| int ret; |
| |
| if (enable) { |
| ret = pm_runtime_resume_and_get(imx214->dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = imx214_start_streaming(imx214); |
| if (ret < 0) |
| goto err_rpm_put; |
| } else { |
| ret = imx214_stop_streaming(imx214); |
| if (ret < 0) |
| goto err_rpm_put; |
| pm_runtime_put(imx214->dev); |
| } |
| |
| return 0; |
| |
| err_rpm_put: |
| pm_runtime_put(imx214->dev); |
| return ret; |
| } |
| |
| static int imx214_g_frame_interval(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_frame_interval *fival) |
| { |
| fival->interval.numerator = 1; |
| fival->interval.denominator = IMX214_FPS; |
| |
| return 0; |
| } |
| |
| static int imx214_enum_frame_interval(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_frame_interval_enum *fie) |
| { |
| const struct imx214_mode *mode; |
| |
| if (fie->index != 0) |
| return -EINVAL; |
| |
| mode = v4l2_find_nearest_size(imx214_modes, |
| ARRAY_SIZE(imx214_modes), width, height, |
| fie->width, fie->height); |
| |
| fie->code = IMX214_MBUS_CODE; |
| fie->width = mode->width; |
| fie->height = mode->height; |
| fie->interval.numerator = 1; |
| fie->interval.denominator = IMX214_FPS; |
| |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_video_ops imx214_video_ops = { |
| .s_stream = imx214_s_stream, |
| .g_frame_interval = imx214_g_frame_interval, |
| .s_frame_interval = imx214_g_frame_interval, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = { |
| .enum_mbus_code = imx214_enum_mbus_code, |
| .enum_frame_size = imx214_enum_frame_size, |
| .enum_frame_interval = imx214_enum_frame_interval, |
| .get_fmt = imx214_get_format, |
| .set_fmt = imx214_set_format, |
| .get_selection = imx214_get_selection, |
| .init_cfg = imx214_entity_init_cfg, |
| }; |
| |
| static const struct v4l2_subdev_ops imx214_subdev_ops = { |
| .core = &imx214_core_ops, |
| .video = &imx214_video_ops, |
| .pad = &imx214_subdev_pad_ops, |
| }; |
| |
| static const struct regmap_config sensor_regmap_config = { |
| .reg_bits = 16, |
| .val_bits = 8, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static int imx214_get_regulators(struct device *dev, struct imx214 *imx214) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < IMX214_NUM_SUPPLIES; i++) |
| imx214->supplies[i].supply = imx214_supply_name[i]; |
| |
| return devm_regulator_bulk_get(dev, IMX214_NUM_SUPPLIES, |
| imx214->supplies); |
| } |
| |
| static int imx214_parse_fwnode(struct device *dev) |
| { |
| struct fwnode_handle *endpoint; |
| struct v4l2_fwnode_endpoint bus_cfg = { |
| .bus_type = V4L2_MBUS_CSI2_DPHY, |
| }; |
| unsigned int i; |
| int ret; |
| |
| endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL); |
| if (!endpoint) { |
| dev_err(dev, "endpoint node not found\n"); |
| return -EINVAL; |
| } |
| |
| ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg); |
| if (ret) { |
| dev_err(dev, "parsing endpoint node failed\n"); |
| goto done; |
| } |
| |
| for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) |
| if (bus_cfg.link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ) |
| break; |
| |
| if (i == bus_cfg.nr_of_link_frequencies) { |
| dev_err(dev, "link-frequencies %d not supported, Please review your DT\n", |
| IMX214_DEFAULT_LINK_FREQ); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| done: |
| v4l2_fwnode_endpoint_free(&bus_cfg); |
| fwnode_handle_put(endpoint); |
| return ret; |
| } |
| |
| static int imx214_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct imx214 *imx214; |
| static const s64 link_freq[] = { |
| IMX214_DEFAULT_LINK_FREQ, |
| }; |
| static const struct v4l2_area unit_size = { |
| .width = 1120, |
| .height = 1120, |
| }; |
| int ret; |
| |
| ret = imx214_parse_fwnode(dev); |
| if (ret) |
| return ret; |
| |
| imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL); |
| if (!imx214) |
| return -ENOMEM; |
| |
| imx214->dev = dev; |
| |
| imx214->xclk = devm_clk_get(dev, NULL); |
| if (IS_ERR(imx214->xclk)) { |
| dev_err(dev, "could not get xclk"); |
| return PTR_ERR(imx214->xclk); |
| } |
| |
| ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ); |
| if (ret) { |
| dev_err(dev, "could not set xclk frequency\n"); |
| return ret; |
| } |
| |
| ret = imx214_get_regulators(dev, imx214); |
| if (ret < 0) { |
| dev_err(dev, "cannot get regulators\n"); |
| return ret; |
| } |
| |
| imx214->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); |
| if (IS_ERR(imx214->enable_gpio)) { |
| dev_err(dev, "cannot get enable gpio\n"); |
| return PTR_ERR(imx214->enable_gpio); |
| } |
| |
| imx214->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config); |
| if (IS_ERR(imx214->regmap)) { |
| dev_err(dev, "regmap init failed\n"); |
| return PTR_ERR(imx214->regmap); |
| } |
| |
| v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops); |
| |
| /* |
| * Enable power initially, to avoid warnings |
| * from clk_disable on power_off |
| */ |
| imx214_power_on(imx214->dev); |
| |
| pm_runtime_set_active(imx214->dev); |
| pm_runtime_enable(imx214->dev); |
| pm_runtime_idle(imx214->dev); |
| |
| v4l2_ctrl_handler_init(&imx214->ctrls, 3); |
| |
| imx214->pixel_rate = v4l2_ctrl_new_std(&imx214->ctrls, NULL, |
| V4L2_CID_PIXEL_RATE, 0, |
| IMX214_DEFAULT_PIXEL_RATE, 1, |
| IMX214_DEFAULT_PIXEL_RATE); |
| imx214->link_freq = v4l2_ctrl_new_int_menu(&imx214->ctrls, NULL, |
| V4L2_CID_LINK_FREQ, |
| ARRAY_SIZE(link_freq) - 1, |
| 0, link_freq); |
| if (imx214->link_freq) |
| imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| |
| /* |
| * WARNING! |
| * Values obtained reverse engineering blobs and/or devices. |
| * Ranges and functionality might be wrong. |
| * |
| * Sony, please release some register set documentation for the |
| * device. |
| * |
| * Yours sincerely, Ricardo. |
| */ |
| imx214->exposure = v4l2_ctrl_new_std(&imx214->ctrls, &imx214_ctrl_ops, |
| V4L2_CID_EXPOSURE, |
| 0, 3184, 1, 0x0c70); |
| |
| imx214->unit_size = v4l2_ctrl_new_std_compound(&imx214->ctrls, |
| NULL, |
| V4L2_CID_UNIT_CELL_SIZE, |
| v4l2_ctrl_ptr_create((void *)&unit_size)); |
| ret = imx214->ctrls.error; |
| if (ret) { |
| dev_err(&client->dev, "%s control init failed (%d)\n", |
| __func__, ret); |
| goto free_ctrl; |
| } |
| |
| imx214->sd.ctrl_handler = &imx214->ctrls; |
| mutex_init(&imx214->mutex); |
| imx214->ctrls.lock = &imx214->mutex; |
| |
| imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| imx214->pad.flags = MEDIA_PAD_FL_SOURCE; |
| imx214->sd.dev = &client->dev; |
| imx214->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| |
| ret = media_entity_pads_init(&imx214->sd.entity, 1, &imx214->pad); |
| if (ret < 0) { |
| dev_err(dev, "could not register media entity\n"); |
| goto free_ctrl; |
| } |
| |
| imx214_entity_init_cfg(&imx214->sd, NULL); |
| |
| ret = v4l2_async_register_subdev_sensor(&imx214->sd); |
| if (ret < 0) { |
| dev_err(dev, "could not register v4l2 device\n"); |
| goto free_entity; |
| } |
| |
| return 0; |
| |
| free_entity: |
| media_entity_cleanup(&imx214->sd.entity); |
| free_ctrl: |
| mutex_destroy(&imx214->mutex); |
| v4l2_ctrl_handler_free(&imx214->ctrls); |
| pm_runtime_disable(imx214->dev); |
| |
| return ret; |
| } |
| |
| static void imx214_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct imx214 *imx214 = to_imx214(sd); |
| |
| v4l2_async_unregister_subdev(&imx214->sd); |
| media_entity_cleanup(&imx214->sd.entity); |
| v4l2_ctrl_handler_free(&imx214->ctrls); |
| |
| pm_runtime_disable(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| |
| mutex_destroy(&imx214->mutex); |
| } |
| |
| static const struct of_device_id imx214_of_match[] = { |
| { .compatible = "sony,imx214" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, imx214_of_match); |
| |
| static const struct dev_pm_ops imx214_pm_ops = { |
| SET_RUNTIME_PM_OPS(imx214_power_off, imx214_power_on, NULL) |
| }; |
| |
| static struct i2c_driver imx214_i2c_driver = { |
| .driver = { |
| .of_match_table = imx214_of_match, |
| .pm = &imx214_pm_ops, |
| .name = "imx214", |
| }, |
| .probe = imx214_probe, |
| .remove = imx214_remove, |
| }; |
| |
| module_i2c_driver(imx214_i2c_driver); |
| |
| MODULE_DESCRIPTION("Sony IMX214 Camera driver"); |
| MODULE_AUTHOR("Ricardo Ribalda <ribalda@kernel.org>"); |
| MODULE_LICENSE("GPL v2"); |