| .. SPDX-License-Identifier: GPL-2.0 |
| .. include:: ../../../disclaimer-zh_TW.rst |
| |
| :Original: Documentation/admin-guide/mm/damon/start.rst |
| |
| :翻譯: |
| |
| 司延騰 Yanteng Si <siyanteng@loongson.cn> |
| |
| :校譯: |
| |
| ======== |
| 入門指南 |
| ======== |
| |
| 本文通過演示DAMON的默認用戶空間工具,簡要地介紹瞭如何使用DAMON。請注意,爲了簡潔 |
| 起見,本文檔只描述了它的部分功能。更多細節請參考該工具的使用文檔。 |
| `doc <https://github.com/awslabs/damo/blob/next/USAGE.md>`_ . |
| |
| |
| 前提條件 |
| ======== |
| |
| 內核 |
| ---- |
| |
| 首先,你要確保你當前系統中跑的內核構建時選定了這個功能選項 ``CONFIG_DAMON_*=y``. |
| |
| |
| 用戶空間工具 |
| ------------ |
| |
| 在演示中,我們將使用DAMON的默認用戶空間工具,稱爲DAMON Operator(DAMO)。它可以在 |
| https://github.com/awslabs/damo找到。下面的例子假設DAMO在你的$PATH上。當然,但 |
| 這並不是強制性的。 |
| |
| 因爲DAMO使用了DAMON的sysfs接口(詳情請參考:doc:`usage`),你應該確保 |
| :doc:`sysfs </filesystems/sysfs>` 被掛載。 |
| |
| 記錄數據訪問模式 |
| ================ |
| |
| 下面的命令記錄了一個程序的內存訪問模式,並將監測結果保存到文件中。 :: |
| |
| $ git clone https://github.com/sjp38/masim |
| $ cd masim; make; ./masim ./configs/zigzag.cfg & |
| $ sudo damo record -o damon.data $(pidof masim) |
| |
| 命令的前兩行下載了一個人工內存訪問生成器程序並在後臺運行。生成器將重複地逐一訪問兩個 |
| 100 MiB大小的內存區域。你可以用你的真實工作負載來代替它。最後一行要求 ``damo`` 將 |
| 訪問模式記錄在 ``damon.data`` 文件中。 |
| |
| |
| 將記錄的模式可視化 |
| ================== |
| |
| 你可以在heatmap中直觀地看到這種模式,顯示哪個內存區域(X軸)何時被訪問(Y軸)以及訪 |
| 問的頻率(數字)。:: |
| |
| $ sudo damo report heats --heatmap stdout |
| 22222222222222222222222222222222222222211111111111111111111111111111111111111100 |
| 44444444444444444444444444444444444444434444444444444444444444444444444444443200 |
| 44444444444444444444444444444444444444433444444444444444444444444444444444444200 |
| 33333333333333333333333333333333333333344555555555555555555555555555555555555200 |
| 33333333333333333333333333333333333344444444444444444444444444444444444444444200 |
| 22222222222222222222222222222222222223355555555555555555555555555555555555555200 |
| 00000000000000000000000000000000000000288888888888888888888888888888888888888400 |
| 00000000000000000000000000000000000000288888888888888888888888888888888888888400 |
| 33333333333333333333333333333333333333355555555555555555555555555555555555555200 |
| 88888888888888888888888888888888888888600000000000000000000000000000000000000000 |
| 88888888888888888888888888888888888888600000000000000000000000000000000000000000 |
| 33333333333333333333333333333333333333444444444444444444444444444444444444443200 |
| 00000000000000000000000000000000000000288888888888888888888888888888888888888400 |
| [...] |
| # access_frequency: 0 1 2 3 4 5 6 7 8 9 |
| # x-axis: space (139728247021568-139728453431248: 196.848 MiB) |
| # y-axis: time (15256597248362-15326899978162: 1 m 10.303 s) |
| # resolution: 80x40 (2.461 MiB and 1.758 s for each character) |
| |
| 你也可以直觀地看到工作集的大小分佈,按大小排序。:: |
| |
| $ sudo damo report wss --range 0 101 10 |
| # <percentile> <wss> |
| # target_id 18446632103789443072 |
| # avr: 107.708 MiB |
| 0 0 B | | |
| 10 95.328 MiB |**************************** | |
| 20 95.332 MiB |**************************** | |
| 30 95.340 MiB |**************************** | |
| 40 95.387 MiB |**************************** | |
| 50 95.387 MiB |**************************** | |
| 60 95.398 MiB |**************************** | |
| 70 95.398 MiB |**************************** | |
| 80 95.504 MiB |**************************** | |
| 90 190.703 MiB |********************************************************* | |
| 100 196.875 MiB |***********************************************************| |
| |
| 在上述命令中使用 ``--sortby`` 選項,可以顯示工作集的大小是如何按時間順序變化的。:: |
| |
| $ sudo damo report wss --range 0 101 10 --sortby time |
| # <percentile> <wss> |
| # target_id 18446632103789443072 |
| # avr: 107.708 MiB |
| 0 3.051 MiB | | |
| 10 190.703 MiB |***********************************************************| |
| 20 95.336 MiB |***************************** | |
| 30 95.328 MiB |***************************** | |
| 40 95.387 MiB |***************************** | |
| 50 95.332 MiB |***************************** | |
| 60 95.320 MiB |***************************** | |
| 70 95.398 MiB |***************************** | |
| 80 95.398 MiB |***************************** | |
| 90 95.340 MiB |***************************** | |
| 100 95.398 MiB |***************************** | |
| |
| |
| 數據訪問模式感知的內存管理 |
| ========================== |
| |
| 以下三個命令使每一個大小>=4K的內存區域在你的工作負載中沒有被訪問>=60秒,就會被換掉。 :: |
| |
| $ echo "#min-size max-size min-acc max-acc min-age max-age action" > test_scheme |
| $ echo "4K max 0 0 60s max pageout" >> test_scheme |
| $ damo schemes -c test_scheme <pid of your workload> |
| |