| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * MMCIF eMMC driver. |
| * |
| * Copyright (C) 2010 Renesas Solutions Corp. |
| * Yusuke Goda <yusuke.goda.sx@renesas.com> |
| */ |
| |
| /* |
| * The MMCIF driver is now processing MMC requests asynchronously, according |
| * to the Linux MMC API requirement. |
| * |
| * The MMCIF driver processes MMC requests in up to 3 stages: command, optional |
| * data, and optional stop. To achieve asynchronous processing each of these |
| * stages is split into two halves: a top and a bottom half. The top half |
| * initialises the hardware, installs a timeout handler to handle completion |
| * timeouts, and returns. In case of the command stage this immediately returns |
| * control to the caller, leaving all further processing to run asynchronously. |
| * All further request processing is performed by the bottom halves. |
| * |
| * The bottom half further consists of a "hard" IRQ handler, an IRQ handler |
| * thread, a DMA completion callback, if DMA is used, a timeout work, and |
| * request- and stage-specific handler methods. |
| * |
| * Each bottom half run begins with either a hardware interrupt, a DMA callback |
| * invocation, or a timeout work run. In case of an error or a successful |
| * processing completion, the MMC core is informed and the request processing is |
| * finished. In case processing has to continue, i.e., if data has to be read |
| * from or written to the card, or if a stop command has to be sent, the next |
| * top half is called, which performs the necessary hardware handling and |
| * reschedules the timeout work. This returns the driver state machine into the |
| * bottom half waiting state. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/clk.h> |
| #include <linux/completion.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmaengine.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/core.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/mmc.h> |
| #include <linux/mmc/sdio.h> |
| #include <linux/mmc/slot-gpio.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/mutex.h> |
| #include <linux/pagemap.h> |
| #include <linux/platform_data/sh_mmcif.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_qos.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/sh_dma.h> |
| #include <linux/spinlock.h> |
| #include <linux/module.h> |
| |
| #define DRIVER_NAME "sh_mmcif" |
| |
| /* CE_CMD_SET */ |
| #define CMD_MASK 0x3f000000 |
| #define CMD_SET_RTYP_NO ((0 << 23) | (0 << 22)) |
| #define CMD_SET_RTYP_6B ((0 << 23) | (1 << 22)) /* R1/R1b/R3/R4/R5 */ |
| #define CMD_SET_RTYP_17B ((1 << 23) | (0 << 22)) /* R2 */ |
| #define CMD_SET_RBSY (1 << 21) /* R1b */ |
| #define CMD_SET_CCSEN (1 << 20) |
| #define CMD_SET_WDAT (1 << 19) /* 1: on data, 0: no data */ |
| #define CMD_SET_DWEN (1 << 18) /* 1: write, 0: read */ |
| #define CMD_SET_CMLTE (1 << 17) /* 1: multi block trans, 0: single */ |
| #define CMD_SET_CMD12EN (1 << 16) /* 1: CMD12 auto issue */ |
| #define CMD_SET_RIDXC_INDEX ((0 << 15) | (0 << 14)) /* index check */ |
| #define CMD_SET_RIDXC_BITS ((0 << 15) | (1 << 14)) /* check bits check */ |
| #define CMD_SET_RIDXC_NO ((1 << 15) | (0 << 14)) /* no check */ |
| #define CMD_SET_CRC7C ((0 << 13) | (0 << 12)) /* CRC7 check*/ |
| #define CMD_SET_CRC7C_BITS ((0 << 13) | (1 << 12)) /* check bits check*/ |
| #define CMD_SET_CRC7C_INTERNAL ((1 << 13) | (0 << 12)) /* internal CRC7 check*/ |
| #define CMD_SET_CRC16C (1 << 10) /* 0: CRC16 check*/ |
| #define CMD_SET_CRCSTE (1 << 8) /* 1: not receive CRC status */ |
| #define CMD_SET_TBIT (1 << 7) /* 1: tran mission bit "Low" */ |
| #define CMD_SET_OPDM (1 << 6) /* 1: open/drain */ |
| #define CMD_SET_CCSH (1 << 5) |
| #define CMD_SET_DARS (1 << 2) /* Dual Data Rate */ |
| #define CMD_SET_DATW_1 ((0 << 1) | (0 << 0)) /* 1bit */ |
| #define CMD_SET_DATW_4 ((0 << 1) | (1 << 0)) /* 4bit */ |
| #define CMD_SET_DATW_8 ((1 << 1) | (0 << 0)) /* 8bit */ |
| |
| /* CE_CMD_CTRL */ |
| #define CMD_CTRL_BREAK (1 << 0) |
| |
| /* CE_BLOCK_SET */ |
| #define BLOCK_SIZE_MASK 0x0000ffff |
| |
| /* CE_INT */ |
| #define INT_CCSDE (1 << 29) |
| #define INT_CMD12DRE (1 << 26) |
| #define INT_CMD12RBE (1 << 25) |
| #define INT_CMD12CRE (1 << 24) |
| #define INT_DTRANE (1 << 23) |
| #define INT_BUFRE (1 << 22) |
| #define INT_BUFWEN (1 << 21) |
| #define INT_BUFREN (1 << 20) |
| #define INT_CCSRCV (1 << 19) |
| #define INT_RBSYE (1 << 17) |
| #define INT_CRSPE (1 << 16) |
| #define INT_CMDVIO (1 << 15) |
| #define INT_BUFVIO (1 << 14) |
| #define INT_WDATERR (1 << 11) |
| #define INT_RDATERR (1 << 10) |
| #define INT_RIDXERR (1 << 9) |
| #define INT_RSPERR (1 << 8) |
| #define INT_CCSTO (1 << 5) |
| #define INT_CRCSTO (1 << 4) |
| #define INT_WDATTO (1 << 3) |
| #define INT_RDATTO (1 << 2) |
| #define INT_RBSYTO (1 << 1) |
| #define INT_RSPTO (1 << 0) |
| #define INT_ERR_STS (INT_CMDVIO | INT_BUFVIO | INT_WDATERR | \ |
| INT_RDATERR | INT_RIDXERR | INT_RSPERR | \ |
| INT_CCSTO | INT_CRCSTO | INT_WDATTO | \ |
| INT_RDATTO | INT_RBSYTO | INT_RSPTO) |
| |
| #define INT_ALL (INT_RBSYE | INT_CRSPE | INT_BUFREN | \ |
| INT_BUFWEN | INT_CMD12DRE | INT_BUFRE | \ |
| INT_DTRANE | INT_CMD12RBE | INT_CMD12CRE) |
| |
| #define INT_CCS (INT_CCSTO | INT_CCSRCV | INT_CCSDE) |
| |
| /* CE_INT_MASK */ |
| #define MASK_ALL 0x00000000 |
| #define MASK_MCCSDE (1 << 29) |
| #define MASK_MCMD12DRE (1 << 26) |
| #define MASK_MCMD12RBE (1 << 25) |
| #define MASK_MCMD12CRE (1 << 24) |
| #define MASK_MDTRANE (1 << 23) |
| #define MASK_MBUFRE (1 << 22) |
| #define MASK_MBUFWEN (1 << 21) |
| #define MASK_MBUFREN (1 << 20) |
| #define MASK_MCCSRCV (1 << 19) |
| #define MASK_MRBSYE (1 << 17) |
| #define MASK_MCRSPE (1 << 16) |
| #define MASK_MCMDVIO (1 << 15) |
| #define MASK_MBUFVIO (1 << 14) |
| #define MASK_MWDATERR (1 << 11) |
| #define MASK_MRDATERR (1 << 10) |
| #define MASK_MRIDXERR (1 << 9) |
| #define MASK_MRSPERR (1 << 8) |
| #define MASK_MCCSTO (1 << 5) |
| #define MASK_MCRCSTO (1 << 4) |
| #define MASK_MWDATTO (1 << 3) |
| #define MASK_MRDATTO (1 << 2) |
| #define MASK_MRBSYTO (1 << 1) |
| #define MASK_MRSPTO (1 << 0) |
| |
| #define MASK_START_CMD (MASK_MCMDVIO | MASK_MBUFVIO | MASK_MWDATERR | \ |
| MASK_MRDATERR | MASK_MRIDXERR | MASK_MRSPERR | \ |
| MASK_MCRCSTO | MASK_MWDATTO | \ |
| MASK_MRDATTO | MASK_MRBSYTO | MASK_MRSPTO) |
| |
| #define MASK_CLEAN (INT_ERR_STS | MASK_MRBSYE | MASK_MCRSPE | \ |
| MASK_MBUFREN | MASK_MBUFWEN | \ |
| MASK_MCMD12DRE | MASK_MBUFRE | MASK_MDTRANE | \ |
| MASK_MCMD12RBE | MASK_MCMD12CRE) |
| |
| /* CE_HOST_STS1 */ |
| #define STS1_CMDSEQ (1 << 31) |
| |
| /* CE_HOST_STS2 */ |
| #define STS2_CRCSTE (1 << 31) |
| #define STS2_CRC16E (1 << 30) |
| #define STS2_AC12CRCE (1 << 29) |
| #define STS2_RSPCRC7E (1 << 28) |
| #define STS2_CRCSTEBE (1 << 27) |
| #define STS2_RDATEBE (1 << 26) |
| #define STS2_AC12REBE (1 << 25) |
| #define STS2_RSPEBE (1 << 24) |
| #define STS2_AC12IDXE (1 << 23) |
| #define STS2_RSPIDXE (1 << 22) |
| #define STS2_CCSTO (1 << 15) |
| #define STS2_RDATTO (1 << 14) |
| #define STS2_DATBSYTO (1 << 13) |
| #define STS2_CRCSTTO (1 << 12) |
| #define STS2_AC12BSYTO (1 << 11) |
| #define STS2_RSPBSYTO (1 << 10) |
| #define STS2_AC12RSPTO (1 << 9) |
| #define STS2_RSPTO (1 << 8) |
| #define STS2_CRC_ERR (STS2_CRCSTE | STS2_CRC16E | \ |
| STS2_AC12CRCE | STS2_RSPCRC7E | STS2_CRCSTEBE) |
| #define STS2_TIMEOUT_ERR (STS2_CCSTO | STS2_RDATTO | \ |
| STS2_DATBSYTO | STS2_CRCSTTO | \ |
| STS2_AC12BSYTO | STS2_RSPBSYTO | \ |
| STS2_AC12RSPTO | STS2_RSPTO) |
| |
| #define CLKDEV_EMMC_DATA 52000000 /* 52 MHz */ |
| #define CLKDEV_MMC_DATA 20000000 /* 20 MHz */ |
| #define CLKDEV_INIT 400000 /* 400 kHz */ |
| |
| enum sh_mmcif_state { |
| STATE_IDLE, |
| STATE_REQUEST, |
| STATE_IOS, |
| STATE_TIMEOUT, |
| }; |
| |
| enum sh_mmcif_wait_for { |
| MMCIF_WAIT_FOR_REQUEST, |
| MMCIF_WAIT_FOR_CMD, |
| MMCIF_WAIT_FOR_MREAD, |
| MMCIF_WAIT_FOR_MWRITE, |
| MMCIF_WAIT_FOR_READ, |
| MMCIF_WAIT_FOR_WRITE, |
| MMCIF_WAIT_FOR_READ_END, |
| MMCIF_WAIT_FOR_WRITE_END, |
| MMCIF_WAIT_FOR_STOP, |
| }; |
| |
| /* |
| * difference for each SoC |
| */ |
| struct sh_mmcif_host { |
| struct mmc_host *mmc; |
| struct mmc_request *mrq; |
| struct platform_device *pd; |
| struct clk *clk; |
| int bus_width; |
| unsigned char timing; |
| bool sd_error; |
| bool dying; |
| long timeout; |
| void __iomem *addr; |
| spinlock_t lock; /* protect sh_mmcif_host::state */ |
| enum sh_mmcif_state state; |
| enum sh_mmcif_wait_for wait_for; |
| struct delayed_work timeout_work; |
| size_t blocksize; |
| struct sg_mapping_iter sg_miter; |
| bool power; |
| bool ccs_enable; /* Command Completion Signal support */ |
| bool clk_ctrl2_enable; |
| struct mutex thread_lock; |
| u32 clkdiv_map; /* see CE_CLK_CTRL::CLKDIV */ |
| |
| /* DMA support */ |
| struct dma_chan *chan_rx; |
| struct dma_chan *chan_tx; |
| struct completion dma_complete; |
| bool dma_active; |
| }; |
| |
| static const struct of_device_id sh_mmcif_of_match[] = { |
| { .compatible = "renesas,sh-mmcif" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sh_mmcif_of_match); |
| |
| #define sh_mmcif_host_to_dev(host) (&host->pd->dev) |
| |
| static inline void sh_mmcif_bitset(struct sh_mmcif_host *host, |
| unsigned int reg, u32 val) |
| { |
| writel(val | readl(host->addr + reg), host->addr + reg); |
| } |
| |
| static inline void sh_mmcif_bitclr(struct sh_mmcif_host *host, |
| unsigned int reg, u32 val) |
| { |
| writel(~val & readl(host->addr + reg), host->addr + reg); |
| } |
| |
| static void sh_mmcif_dma_complete(void *arg) |
| { |
| struct sh_mmcif_host *host = arg; |
| struct mmc_request *mrq = host->mrq; |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| |
| dev_dbg(dev, "Command completed\n"); |
| |
| if (WARN(!mrq || !mrq->data, "%s: NULL data in DMA completion!\n", |
| dev_name(dev))) |
| return; |
| |
| complete(&host->dma_complete); |
| } |
| |
| static void sh_mmcif_start_dma_rx(struct sh_mmcif_host *host) |
| { |
| struct mmc_data *data = host->mrq->data; |
| struct scatterlist *sg = data->sg; |
| struct dma_async_tx_descriptor *desc = NULL; |
| struct dma_chan *chan = host->chan_rx; |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| dma_cookie_t cookie = -EINVAL; |
| int ret; |
| |
| ret = dma_map_sg(chan->device->dev, sg, data->sg_len, |
| DMA_FROM_DEVICE); |
| if (ret > 0) { |
| host->dma_active = true; |
| desc = dmaengine_prep_slave_sg(chan, sg, ret, |
| DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| } |
| |
| if (desc) { |
| desc->callback = sh_mmcif_dma_complete; |
| desc->callback_param = host; |
| cookie = dmaengine_submit(desc); |
| sh_mmcif_bitset(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAREN); |
| dma_async_issue_pending(chan); |
| } |
| dev_dbg(dev, "%s(): mapped %d -> %d, cookie %d\n", |
| __func__, data->sg_len, ret, cookie); |
| |
| if (!desc) { |
| /* DMA failed, fall back to PIO */ |
| if (ret >= 0) |
| ret = -EIO; |
| host->chan_rx = NULL; |
| host->dma_active = false; |
| dma_release_channel(chan); |
| /* Free the Tx channel too */ |
| chan = host->chan_tx; |
| if (chan) { |
| host->chan_tx = NULL; |
| dma_release_channel(chan); |
| } |
| dev_warn(dev, |
| "DMA failed: %d, falling back to PIO\n", ret); |
| sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAREN | BUF_ACC_DMAWEN); |
| } |
| |
| dev_dbg(dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__, |
| desc, cookie, data->sg_len); |
| } |
| |
| static void sh_mmcif_start_dma_tx(struct sh_mmcif_host *host) |
| { |
| struct mmc_data *data = host->mrq->data; |
| struct scatterlist *sg = data->sg; |
| struct dma_async_tx_descriptor *desc = NULL; |
| struct dma_chan *chan = host->chan_tx; |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| dma_cookie_t cookie = -EINVAL; |
| int ret; |
| |
| ret = dma_map_sg(chan->device->dev, sg, data->sg_len, |
| DMA_TO_DEVICE); |
| if (ret > 0) { |
| host->dma_active = true; |
| desc = dmaengine_prep_slave_sg(chan, sg, ret, |
| DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); |
| } |
| |
| if (desc) { |
| desc->callback = sh_mmcif_dma_complete; |
| desc->callback_param = host; |
| cookie = dmaengine_submit(desc); |
| sh_mmcif_bitset(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAWEN); |
| dma_async_issue_pending(chan); |
| } |
| dev_dbg(dev, "%s(): mapped %d -> %d, cookie %d\n", |
| __func__, data->sg_len, ret, cookie); |
| |
| if (!desc) { |
| /* DMA failed, fall back to PIO */ |
| if (ret >= 0) |
| ret = -EIO; |
| host->chan_tx = NULL; |
| host->dma_active = false; |
| dma_release_channel(chan); |
| /* Free the Rx channel too */ |
| chan = host->chan_rx; |
| if (chan) { |
| host->chan_rx = NULL; |
| dma_release_channel(chan); |
| } |
| dev_warn(dev, |
| "DMA failed: %d, falling back to PIO\n", ret); |
| sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAREN | BUF_ACC_DMAWEN); |
| } |
| |
| dev_dbg(dev, "%s(): desc %p, cookie %d\n", __func__, |
| desc, cookie); |
| } |
| |
| static struct dma_chan * |
| sh_mmcif_request_dma_pdata(struct sh_mmcif_host *host, uintptr_t slave_id) |
| { |
| dma_cap_mask_t mask; |
| |
| dma_cap_zero(mask); |
| dma_cap_set(DMA_SLAVE, mask); |
| if (slave_id <= 0) |
| return NULL; |
| |
| return dma_request_channel(mask, shdma_chan_filter, (void *)slave_id); |
| } |
| |
| static int sh_mmcif_dma_slave_config(struct sh_mmcif_host *host, |
| struct dma_chan *chan, |
| enum dma_transfer_direction direction) |
| { |
| struct resource *res; |
| struct dma_slave_config cfg = { 0, }; |
| |
| res = platform_get_resource(host->pd, IORESOURCE_MEM, 0); |
| if (!res) |
| return -EINVAL; |
| |
| cfg.direction = direction; |
| |
| if (direction == DMA_DEV_TO_MEM) { |
| cfg.src_addr = res->start + MMCIF_CE_DATA; |
| cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| } else { |
| cfg.dst_addr = res->start + MMCIF_CE_DATA; |
| cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; |
| } |
| |
| return dmaengine_slave_config(chan, &cfg); |
| } |
| |
| static void sh_mmcif_request_dma(struct sh_mmcif_host *host) |
| { |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| host->dma_active = false; |
| |
| /* We can only either use DMA for both Tx and Rx or not use it at all */ |
| if (IS_ENABLED(CONFIG_SUPERH) && dev->platform_data) { |
| struct sh_mmcif_plat_data *pdata = dev->platform_data; |
| |
| host->chan_tx = sh_mmcif_request_dma_pdata(host, |
| pdata->slave_id_tx); |
| host->chan_rx = sh_mmcif_request_dma_pdata(host, |
| pdata->slave_id_rx); |
| } else { |
| host->chan_tx = dma_request_chan(dev, "tx"); |
| if (IS_ERR(host->chan_tx)) |
| host->chan_tx = NULL; |
| host->chan_rx = dma_request_chan(dev, "rx"); |
| if (IS_ERR(host->chan_rx)) |
| host->chan_rx = NULL; |
| } |
| dev_dbg(dev, "%s: got channel TX %p RX %p\n", __func__, host->chan_tx, |
| host->chan_rx); |
| |
| if (!host->chan_tx || !host->chan_rx || |
| sh_mmcif_dma_slave_config(host, host->chan_tx, DMA_MEM_TO_DEV) || |
| sh_mmcif_dma_slave_config(host, host->chan_rx, DMA_DEV_TO_MEM)) |
| goto error; |
| |
| return; |
| |
| error: |
| if (host->chan_tx) |
| dma_release_channel(host->chan_tx); |
| if (host->chan_rx) |
| dma_release_channel(host->chan_rx); |
| host->chan_tx = host->chan_rx = NULL; |
| } |
| |
| static void sh_mmcif_release_dma(struct sh_mmcif_host *host) |
| { |
| sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAREN | BUF_ACC_DMAWEN); |
| /* Descriptors are freed automatically */ |
| if (host->chan_tx) { |
| struct dma_chan *chan = host->chan_tx; |
| host->chan_tx = NULL; |
| dma_release_channel(chan); |
| } |
| if (host->chan_rx) { |
| struct dma_chan *chan = host->chan_rx; |
| host->chan_rx = NULL; |
| dma_release_channel(chan); |
| } |
| |
| host->dma_active = false; |
| } |
| |
| static void sh_mmcif_clock_control(struct sh_mmcif_host *host, unsigned int clk) |
| { |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| struct sh_mmcif_plat_data *p = dev->platform_data; |
| bool sup_pclk = p ? p->sup_pclk : false; |
| unsigned int current_clk = clk_get_rate(host->clk); |
| unsigned int clkdiv; |
| |
| sh_mmcif_bitclr(host, MMCIF_CE_CLK_CTRL, CLK_ENABLE); |
| sh_mmcif_bitclr(host, MMCIF_CE_CLK_CTRL, CLK_CLEAR); |
| |
| if (!clk) |
| return; |
| |
| if (host->clkdiv_map) { |
| unsigned int freq, best_freq, myclk, div, diff_min, diff; |
| int i; |
| |
| clkdiv = 0; |
| diff_min = ~0; |
| best_freq = 0; |
| for (i = 31; i >= 0; i--) { |
| if (!((1 << i) & host->clkdiv_map)) |
| continue; |
| |
| /* |
| * clk = parent_freq / div |
| * -> parent_freq = clk x div |
| */ |
| |
| div = 1 << (i + 1); |
| freq = clk_round_rate(host->clk, clk * div); |
| myclk = freq / div; |
| diff = (myclk > clk) ? myclk - clk : clk - myclk; |
| |
| if (diff <= diff_min) { |
| best_freq = freq; |
| clkdiv = i; |
| diff_min = diff; |
| } |
| } |
| |
| dev_dbg(dev, "clk %u/%u (%u, 0x%x)\n", |
| (best_freq >> (clkdiv + 1)), clk, best_freq, clkdiv); |
| |
| clk_set_rate(host->clk, best_freq); |
| clkdiv = clkdiv << 16; |
| } else if (sup_pclk && clk == current_clk) { |
| clkdiv = CLK_SUP_PCLK; |
| } else { |
| clkdiv = (fls(DIV_ROUND_UP(current_clk, clk) - 1) - 1) << 16; |
| } |
| |
| sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_CLEAR & clkdiv); |
| sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, CLK_ENABLE); |
| } |
| |
| static void sh_mmcif_sync_reset(struct sh_mmcif_host *host) |
| { |
| u32 tmp; |
| |
| tmp = 0x010f0000 & sh_mmcif_readl(host->addr, MMCIF_CE_CLK_CTRL); |
| |
| sh_mmcif_writel(host->addr, MMCIF_CE_VERSION, SOFT_RST_ON); |
| sh_mmcif_writel(host->addr, MMCIF_CE_VERSION, SOFT_RST_OFF); |
| if (host->ccs_enable) |
| tmp |= SCCSTO_29; |
| if (host->clk_ctrl2_enable) |
| sh_mmcif_writel(host->addr, MMCIF_CE_CLK_CTRL2, 0x0F0F0000); |
| sh_mmcif_bitset(host, MMCIF_CE_CLK_CTRL, tmp | |
| SRSPTO_256 | SRBSYTO_29 | SRWDTO_29); |
| /* byte swap on */ |
| sh_mmcif_bitset(host, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP); |
| } |
| |
| static int sh_mmcif_error_manage(struct sh_mmcif_host *host) |
| { |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| u32 state1, state2; |
| int ret, timeout; |
| |
| host->sd_error = false; |
| |
| state1 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1); |
| state2 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS2); |
| dev_dbg(dev, "ERR HOST_STS1 = %08x\n", state1); |
| dev_dbg(dev, "ERR HOST_STS2 = %08x\n", state2); |
| |
| if (state1 & STS1_CMDSEQ) { |
| sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, CMD_CTRL_BREAK); |
| sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, ~CMD_CTRL_BREAK); |
| for (timeout = 10000; timeout; timeout--) { |
| if (!(sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1) |
| & STS1_CMDSEQ)) |
| break; |
| mdelay(1); |
| } |
| if (!timeout) { |
| dev_err(dev, |
| "Forced end of command sequence timeout err\n"); |
| return -EIO; |
| } |
| sh_mmcif_sync_reset(host); |
| dev_dbg(dev, "Forced end of command sequence\n"); |
| return -EIO; |
| } |
| |
| if (state2 & STS2_CRC_ERR) { |
| dev_err(dev, " CRC error: state %u, wait %u\n", |
| host->state, host->wait_for); |
| ret = -EIO; |
| } else if (state2 & STS2_TIMEOUT_ERR) { |
| dev_err(dev, " Timeout: state %u, wait %u\n", |
| host->state, host->wait_for); |
| ret = -ETIMEDOUT; |
| } else { |
| dev_dbg(dev, " End/Index error: state %u, wait %u\n", |
| host->state, host->wait_for); |
| ret = -EIO; |
| } |
| return ret; |
| } |
| |
| static void sh_mmcif_single_read(struct sh_mmcif_host *host, |
| struct mmc_request *mrq) |
| { |
| struct mmc_data *data = mrq->data; |
| |
| host->blocksize = (sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET) & |
| BLOCK_SIZE_MASK) + 3; |
| |
| sg_miter_start(&host->sg_miter, data->sg, data->sg_len, |
| SG_MITER_TO_SG); |
| |
| host->wait_for = MMCIF_WAIT_FOR_READ; |
| |
| /* buf read enable */ |
| sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN); |
| } |
| |
| static bool sh_mmcif_read_block(struct sh_mmcif_host *host) |
| { |
| struct sg_mapping_iter *sgm = &host->sg_miter; |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| struct mmc_data *data = host->mrq->data; |
| u32 *p; |
| int i; |
| |
| if (host->sd_error) { |
| sg_miter_stop(sgm); |
| data->error = sh_mmcif_error_manage(host); |
| dev_dbg(dev, "%s(): %d\n", __func__, data->error); |
| return false; |
| } |
| |
| if (!sg_miter_next(sgm)) { |
| /* This should not happen on single blocks */ |
| sg_miter_stop(sgm); |
| return false; |
| } |
| |
| p = sgm->addr; |
| |
| for (i = 0; i < host->blocksize / 4; i++) |
| *p++ = sh_mmcif_readl(host->addr, MMCIF_CE_DATA); |
| |
| sg_miter_stop(&host->sg_miter); |
| |
| /* buffer read end */ |
| sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFRE); |
| host->wait_for = MMCIF_WAIT_FOR_READ_END; |
| |
| return true; |
| } |
| |
| static void sh_mmcif_multi_read(struct sh_mmcif_host *host, |
| struct mmc_request *mrq) |
| { |
| struct sg_mapping_iter *sgm = &host->sg_miter; |
| struct mmc_data *data = mrq->data; |
| |
| if (!data->sg_len || !data->sg->length) |
| return; |
| |
| host->blocksize = sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET) & |
| BLOCK_SIZE_MASK; |
| |
| sg_miter_start(sgm, data->sg, data->sg_len, |
| SG_MITER_TO_SG); |
| |
| /* Advance to the first sglist entry */ |
| if (!sg_miter_next(sgm)) { |
| sg_miter_stop(sgm); |
| return; |
| } |
| |
| host->wait_for = MMCIF_WAIT_FOR_MREAD; |
| |
| sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN); |
| } |
| |
| static bool sh_mmcif_mread_block(struct sh_mmcif_host *host) |
| { |
| struct sg_mapping_iter *sgm = &host->sg_miter; |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| struct mmc_data *data = host->mrq->data; |
| u32 *p; |
| int i; |
| |
| if (host->sd_error) { |
| sg_miter_stop(sgm); |
| data->error = sh_mmcif_error_manage(host); |
| dev_dbg(dev, "%s(): %d\n", __func__, data->error); |
| return false; |
| } |
| |
| p = sgm->addr; |
| |
| for (i = 0; i < host->blocksize / 4; i++) |
| *p++ = sh_mmcif_readl(host->addr, MMCIF_CE_DATA); |
| |
| sgm->consumed = host->blocksize; |
| |
| sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN); |
| |
| if (!sg_miter_next(sgm)) { |
| sg_miter_stop(sgm); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void sh_mmcif_single_write(struct sh_mmcif_host *host, |
| struct mmc_request *mrq) |
| { |
| struct mmc_data *data = mrq->data; |
| |
| host->blocksize = (sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET) & |
| BLOCK_SIZE_MASK) + 3; |
| |
| sg_miter_start(&host->sg_miter, data->sg, data->sg_len, |
| SG_MITER_FROM_SG); |
| |
| host->wait_for = MMCIF_WAIT_FOR_WRITE; |
| |
| /* buf write enable */ |
| sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN); |
| } |
| |
| static bool sh_mmcif_write_block(struct sh_mmcif_host *host) |
| { |
| struct sg_mapping_iter *sgm = &host->sg_miter; |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| struct mmc_data *data = host->mrq->data; |
| u32 *p; |
| int i; |
| |
| if (host->sd_error) { |
| sg_miter_stop(sgm); |
| data->error = sh_mmcif_error_manage(host); |
| dev_dbg(dev, "%s(): %d\n", __func__, data->error); |
| return false; |
| } |
| |
| if (!sg_miter_next(sgm)) { |
| /* This should not happen on single blocks */ |
| sg_miter_stop(sgm); |
| return false; |
| } |
| |
| p = sgm->addr; |
| |
| for (i = 0; i < host->blocksize / 4; i++) |
| sh_mmcif_writel(host->addr, MMCIF_CE_DATA, *p++); |
| |
| sg_miter_stop(&host->sg_miter); |
| |
| /* buffer write end */ |
| sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MDTRANE); |
| host->wait_for = MMCIF_WAIT_FOR_WRITE_END; |
| |
| return true; |
| } |
| |
| static void sh_mmcif_multi_write(struct sh_mmcif_host *host, |
| struct mmc_request *mrq) |
| { |
| struct sg_mapping_iter *sgm = &host->sg_miter; |
| struct mmc_data *data = mrq->data; |
| |
| if (!data->sg_len || !data->sg->length) |
| return; |
| |
| host->blocksize = sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET) & |
| BLOCK_SIZE_MASK; |
| |
| sg_miter_start(sgm, data->sg, data->sg_len, |
| SG_MITER_FROM_SG); |
| |
| /* Advance to the first sglist entry */ |
| if (!sg_miter_next(sgm)) { |
| sg_miter_stop(sgm); |
| return; |
| } |
| |
| host->wait_for = MMCIF_WAIT_FOR_MWRITE; |
| |
| sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN); |
| } |
| |
| static bool sh_mmcif_mwrite_block(struct sh_mmcif_host *host) |
| { |
| struct sg_mapping_iter *sgm = &host->sg_miter; |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| struct mmc_data *data = host->mrq->data; |
| u32 *p; |
| int i; |
| |
| if (host->sd_error) { |
| sg_miter_stop(sgm); |
| data->error = sh_mmcif_error_manage(host); |
| dev_dbg(dev, "%s(): %d\n", __func__, data->error); |
| return false; |
| } |
| |
| p = sgm->addr; |
| |
| for (i = 0; i < host->blocksize / 4; i++) |
| sh_mmcif_writel(host->addr, MMCIF_CE_DATA, *p++); |
| |
| sgm->consumed = host->blocksize; |
| |
| if (!sg_miter_next(sgm)) { |
| sg_miter_stop(sgm); |
| return false; |
| } |
| |
| sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN); |
| |
| return true; |
| } |
| |
| static void sh_mmcif_get_response(struct sh_mmcif_host *host, |
| struct mmc_command *cmd) |
| { |
| if (cmd->flags & MMC_RSP_136) { |
| cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP3); |
| cmd->resp[1] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP2); |
| cmd->resp[2] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP1); |
| cmd->resp[3] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP0); |
| } else |
| cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP0); |
| } |
| |
| static void sh_mmcif_get_cmd12response(struct sh_mmcif_host *host, |
| struct mmc_command *cmd) |
| { |
| cmd->resp[0] = sh_mmcif_readl(host->addr, MMCIF_CE_RESP_CMD12); |
| } |
| |
| static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host, |
| struct mmc_request *mrq) |
| { |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| struct mmc_data *data = mrq->data; |
| struct mmc_command *cmd = mrq->cmd; |
| u32 opc = cmd->opcode; |
| u32 tmp = 0; |
| |
| /* Response Type check */ |
| switch (mmc_resp_type(cmd)) { |
| case MMC_RSP_NONE: |
| tmp |= CMD_SET_RTYP_NO; |
| break; |
| case MMC_RSP_R1: |
| case MMC_RSP_R3: |
| tmp |= CMD_SET_RTYP_6B; |
| break; |
| case MMC_RSP_R1B: |
| tmp |= CMD_SET_RBSY | CMD_SET_RTYP_6B; |
| break; |
| case MMC_RSP_R2: |
| tmp |= CMD_SET_RTYP_17B; |
| break; |
| default: |
| dev_err(dev, "Unsupported response type.\n"); |
| break; |
| } |
| |
| /* WDAT / DATW */ |
| if (data) { |
| tmp |= CMD_SET_WDAT; |
| switch (host->bus_width) { |
| case MMC_BUS_WIDTH_1: |
| tmp |= CMD_SET_DATW_1; |
| break; |
| case MMC_BUS_WIDTH_4: |
| tmp |= CMD_SET_DATW_4; |
| break; |
| case MMC_BUS_WIDTH_8: |
| tmp |= CMD_SET_DATW_8; |
| break; |
| default: |
| dev_err(dev, "Unsupported bus width.\n"); |
| break; |
| } |
| switch (host->timing) { |
| case MMC_TIMING_MMC_DDR52: |
| /* |
| * MMC core will only set this timing, if the host |
| * advertises the MMC_CAP_1_8V_DDR/MMC_CAP_1_2V_DDR |
| * capability. MMCIF implementations with this |
| * capability, e.g. sh73a0, will have to set it |
| * in their platform data. |
| */ |
| tmp |= CMD_SET_DARS; |
| break; |
| } |
| } |
| /* DWEN */ |
| if (opc == MMC_WRITE_BLOCK || opc == MMC_WRITE_MULTIPLE_BLOCK) |
| tmp |= CMD_SET_DWEN; |
| /* CMLTE/CMD12EN */ |
| if (opc == MMC_READ_MULTIPLE_BLOCK || opc == MMC_WRITE_MULTIPLE_BLOCK) { |
| tmp |= CMD_SET_CMLTE | CMD_SET_CMD12EN; |
| sh_mmcif_bitset(host, MMCIF_CE_BLOCK_SET, |
| data->blocks << 16); |
| } |
| /* RIDXC[1:0] check bits */ |
| if (opc == MMC_SEND_OP_COND || opc == MMC_ALL_SEND_CID || |
| opc == MMC_SEND_CSD || opc == MMC_SEND_CID) |
| tmp |= CMD_SET_RIDXC_BITS; |
| /* RCRC7C[1:0] check bits */ |
| if (opc == MMC_SEND_OP_COND) |
| tmp |= CMD_SET_CRC7C_BITS; |
| /* RCRC7C[1:0] internal CRC7 */ |
| if (opc == MMC_ALL_SEND_CID || |
| opc == MMC_SEND_CSD || opc == MMC_SEND_CID) |
| tmp |= CMD_SET_CRC7C_INTERNAL; |
| |
| return (opc << 24) | tmp; |
| } |
| |
| static int sh_mmcif_data_trans(struct sh_mmcif_host *host, |
| struct mmc_request *mrq, u32 opc) |
| { |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| |
| switch (opc) { |
| case MMC_READ_MULTIPLE_BLOCK: |
| sh_mmcif_multi_read(host, mrq); |
| return 0; |
| case MMC_WRITE_MULTIPLE_BLOCK: |
| sh_mmcif_multi_write(host, mrq); |
| return 0; |
| case MMC_WRITE_BLOCK: |
| sh_mmcif_single_write(host, mrq); |
| return 0; |
| case MMC_READ_SINGLE_BLOCK: |
| case MMC_SEND_EXT_CSD: |
| sh_mmcif_single_read(host, mrq); |
| return 0; |
| default: |
| dev_err(dev, "Unsupported CMD%d\n", opc); |
| return -EINVAL; |
| } |
| } |
| |
| static void sh_mmcif_start_cmd(struct sh_mmcif_host *host, |
| struct mmc_request *mrq) |
| { |
| struct mmc_command *cmd = mrq->cmd; |
| u32 opc; |
| u32 mask = 0; |
| unsigned long flags; |
| |
| if (cmd->flags & MMC_RSP_BUSY) |
| mask = MASK_START_CMD | MASK_MRBSYE; |
| else |
| mask = MASK_START_CMD | MASK_MCRSPE; |
| |
| if (host->ccs_enable) |
| mask |= MASK_MCCSTO; |
| |
| if (mrq->data) { |
| sh_mmcif_writel(host->addr, MMCIF_CE_BLOCK_SET, 0); |
| sh_mmcif_writel(host->addr, MMCIF_CE_BLOCK_SET, |
| mrq->data->blksz); |
| } |
| opc = sh_mmcif_set_cmd(host, mrq); |
| |
| if (host->ccs_enable) |
| sh_mmcif_writel(host->addr, MMCIF_CE_INT, 0xD80430C0); |
| else |
| sh_mmcif_writel(host->addr, MMCIF_CE_INT, 0xD80430C0 | INT_CCS); |
| sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, mask); |
| /* set arg */ |
| sh_mmcif_writel(host->addr, MMCIF_CE_ARG, cmd->arg); |
| /* set cmd */ |
| spin_lock_irqsave(&host->lock, flags); |
| sh_mmcif_writel(host->addr, MMCIF_CE_CMD_SET, opc); |
| |
| host->wait_for = MMCIF_WAIT_FOR_CMD; |
| schedule_delayed_work(&host->timeout_work, host->timeout); |
| spin_unlock_irqrestore(&host->lock, flags); |
| } |
| |
| static void sh_mmcif_stop_cmd(struct sh_mmcif_host *host, |
| struct mmc_request *mrq) |
| { |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| |
| switch (mrq->cmd->opcode) { |
| case MMC_READ_MULTIPLE_BLOCK: |
| sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MCMD12DRE); |
| break; |
| case MMC_WRITE_MULTIPLE_BLOCK: |
| sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MCMD12RBE); |
| break; |
| default: |
| dev_err(dev, "unsupported stop cmd\n"); |
| mrq->stop->error = sh_mmcif_error_manage(host); |
| return; |
| } |
| |
| host->wait_for = MMCIF_WAIT_FOR_STOP; |
| } |
| |
| static void sh_mmcif_request(struct mmc_host *mmc, struct mmc_request *mrq) |
| { |
| struct sh_mmcif_host *host = mmc_priv(mmc); |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| if (host->state != STATE_IDLE) { |
| dev_dbg(dev, "%s() rejected, state %u\n", |
| __func__, host->state); |
| spin_unlock_irqrestore(&host->lock, flags); |
| mrq->cmd->error = -EAGAIN; |
| mmc_request_done(mmc, mrq); |
| return; |
| } |
| |
| host->state = STATE_REQUEST; |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| host->mrq = mrq; |
| |
| sh_mmcif_start_cmd(host, mrq); |
| } |
| |
| static void sh_mmcif_clk_setup(struct sh_mmcif_host *host) |
| { |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| |
| if (host->mmc->f_max) { |
| unsigned int f_max, f_min = 0, f_min_old; |
| |
| f_max = host->mmc->f_max; |
| for (f_min_old = f_max; f_min_old > 2;) { |
| f_min = clk_round_rate(host->clk, f_min_old / 2); |
| if (f_min == f_min_old) |
| break; |
| f_min_old = f_min; |
| } |
| |
| /* |
| * This driver assumes this SoC is R-Car Gen2 or later |
| */ |
| host->clkdiv_map = 0x3ff; |
| |
| host->mmc->f_max = f_max >> ffs(host->clkdiv_map); |
| host->mmc->f_min = f_min >> fls(host->clkdiv_map); |
| } else { |
| unsigned int clk = clk_get_rate(host->clk); |
| |
| host->mmc->f_max = clk / 2; |
| host->mmc->f_min = clk / 512; |
| } |
| |
| dev_dbg(dev, "clk max/min = %d/%d\n", |
| host->mmc->f_max, host->mmc->f_min); |
| } |
| |
| static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct sh_mmcif_host *host = mmc_priv(mmc); |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| if (host->state != STATE_IDLE) { |
| dev_dbg(dev, "%s() rejected, state %u\n", |
| __func__, host->state); |
| spin_unlock_irqrestore(&host->lock, flags); |
| return; |
| } |
| |
| host->state = STATE_IOS; |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| switch (ios->power_mode) { |
| case MMC_POWER_UP: |
| if (!IS_ERR(mmc->supply.vmmc)) |
| mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); |
| if (!host->power) { |
| clk_prepare_enable(host->clk); |
| pm_runtime_get_sync(dev); |
| sh_mmcif_sync_reset(host); |
| sh_mmcif_request_dma(host); |
| host->power = true; |
| } |
| break; |
| case MMC_POWER_OFF: |
| if (!IS_ERR(mmc->supply.vmmc)) |
| mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); |
| if (host->power) { |
| sh_mmcif_clock_control(host, 0); |
| sh_mmcif_release_dma(host); |
| pm_runtime_put(dev); |
| clk_disable_unprepare(host->clk); |
| host->power = false; |
| } |
| break; |
| case MMC_POWER_ON: |
| sh_mmcif_clock_control(host, ios->clock); |
| break; |
| } |
| |
| host->timing = ios->timing; |
| host->bus_width = ios->bus_width; |
| host->state = STATE_IDLE; |
| } |
| |
| static const struct mmc_host_ops sh_mmcif_ops = { |
| .request = sh_mmcif_request, |
| .set_ios = sh_mmcif_set_ios, |
| .get_cd = mmc_gpio_get_cd, |
| }; |
| |
| static bool sh_mmcif_end_cmd(struct sh_mmcif_host *host) |
| { |
| struct mmc_command *cmd = host->mrq->cmd; |
| struct mmc_data *data = host->mrq->data; |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| long time; |
| |
| if (host->sd_error) { |
| switch (cmd->opcode) { |
| case MMC_ALL_SEND_CID: |
| case MMC_SELECT_CARD: |
| case MMC_APP_CMD: |
| cmd->error = -ETIMEDOUT; |
| break; |
| default: |
| cmd->error = sh_mmcif_error_manage(host); |
| break; |
| } |
| dev_dbg(dev, "CMD%d error %d\n", |
| cmd->opcode, cmd->error); |
| host->sd_error = false; |
| return false; |
| } |
| if (!(cmd->flags & MMC_RSP_PRESENT)) { |
| cmd->error = 0; |
| return false; |
| } |
| |
| sh_mmcif_get_response(host, cmd); |
| |
| if (!data) |
| return false; |
| |
| /* |
| * Completion can be signalled from DMA callback and error, so, have to |
| * reset here, before setting .dma_active |
| */ |
| init_completion(&host->dma_complete); |
| |
| if (data->flags & MMC_DATA_READ) { |
| if (host->chan_rx) |
| sh_mmcif_start_dma_rx(host); |
| } else { |
| if (host->chan_tx) |
| sh_mmcif_start_dma_tx(host); |
| } |
| |
| if (!host->dma_active) { |
| data->error = sh_mmcif_data_trans(host, host->mrq, cmd->opcode); |
| return !data->error; |
| } |
| |
| /* Running in the IRQ thread, can sleep */ |
| time = wait_for_completion_interruptible_timeout(&host->dma_complete, |
| host->timeout); |
| |
| if (data->flags & MMC_DATA_READ) |
| dma_unmap_sg(host->chan_rx->device->dev, |
| data->sg, data->sg_len, |
| DMA_FROM_DEVICE); |
| else |
| dma_unmap_sg(host->chan_tx->device->dev, |
| data->sg, data->sg_len, |
| DMA_TO_DEVICE); |
| |
| if (host->sd_error) { |
| dev_err(host->mmc->parent, |
| "Error IRQ while waiting for DMA completion!\n"); |
| /* Woken up by an error IRQ: abort DMA */ |
| data->error = sh_mmcif_error_manage(host); |
| } else if (!time) { |
| dev_err(host->mmc->parent, "DMA timeout!\n"); |
| data->error = -ETIMEDOUT; |
| } else if (time < 0) { |
| dev_err(host->mmc->parent, |
| "wait_for_completion_...() error %ld!\n", time); |
| data->error = time; |
| } |
| sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC, |
| BUF_ACC_DMAREN | BUF_ACC_DMAWEN); |
| host->dma_active = false; |
| |
| if (data->error) { |
| data->bytes_xfered = 0; |
| /* Abort DMA */ |
| if (data->flags & MMC_DATA_READ) |
| dmaengine_terminate_sync(host->chan_rx); |
| else |
| dmaengine_terminate_sync(host->chan_tx); |
| } |
| |
| return false; |
| } |
| |
| static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id) |
| { |
| struct sh_mmcif_host *host = dev_id; |
| struct mmc_request *mrq; |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| bool wait = false; |
| unsigned long flags; |
| int wait_work; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| wait_work = host->wait_for; |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| cancel_delayed_work_sync(&host->timeout_work); |
| |
| mutex_lock(&host->thread_lock); |
| |
| mrq = host->mrq; |
| if (!mrq) { |
| dev_dbg(dev, "IRQ thread state %u, wait %u: NULL mrq!\n", |
| host->state, host->wait_for); |
| mutex_unlock(&host->thread_lock); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * All handlers return true, if processing continues, and false, if the |
| * request has to be completed - successfully or not |
| */ |
| switch (wait_work) { |
| case MMCIF_WAIT_FOR_REQUEST: |
| /* We're too late, the timeout has already kicked in */ |
| mutex_unlock(&host->thread_lock); |
| return IRQ_HANDLED; |
| case MMCIF_WAIT_FOR_CMD: |
| /* Wait for data? */ |
| wait = sh_mmcif_end_cmd(host); |
| break; |
| case MMCIF_WAIT_FOR_MREAD: |
| /* Wait for more data? */ |
| wait = sh_mmcif_mread_block(host); |
| break; |
| case MMCIF_WAIT_FOR_READ: |
| /* Wait for data end? */ |
| wait = sh_mmcif_read_block(host); |
| break; |
| case MMCIF_WAIT_FOR_MWRITE: |
| /* Wait data to write? */ |
| wait = sh_mmcif_mwrite_block(host); |
| break; |
| case MMCIF_WAIT_FOR_WRITE: |
| /* Wait for data end? */ |
| wait = sh_mmcif_write_block(host); |
| break; |
| case MMCIF_WAIT_FOR_STOP: |
| if (host->sd_error) { |
| mrq->stop->error = sh_mmcif_error_manage(host); |
| dev_dbg(dev, "%s(): %d\n", __func__, mrq->stop->error); |
| break; |
| } |
| sh_mmcif_get_cmd12response(host, mrq->stop); |
| mrq->stop->error = 0; |
| break; |
| case MMCIF_WAIT_FOR_READ_END: |
| case MMCIF_WAIT_FOR_WRITE_END: |
| if (host->sd_error) { |
| mrq->data->error = sh_mmcif_error_manage(host); |
| dev_dbg(dev, "%s(): %d\n", __func__, mrq->data->error); |
| } |
| break; |
| default: |
| BUG(); |
| } |
| |
| if (wait) { |
| schedule_delayed_work(&host->timeout_work, host->timeout); |
| /* Wait for more data */ |
| mutex_unlock(&host->thread_lock); |
| return IRQ_HANDLED; |
| } |
| |
| if (host->wait_for != MMCIF_WAIT_FOR_STOP) { |
| struct mmc_data *data = mrq->data; |
| if (!mrq->cmd->error && data && !data->error) |
| data->bytes_xfered = |
| data->blocks * data->blksz; |
| |
| if (mrq->stop && !mrq->cmd->error && (!data || !data->error)) { |
| sh_mmcif_stop_cmd(host, mrq); |
| if (!mrq->stop->error) { |
| schedule_delayed_work(&host->timeout_work, host->timeout); |
| mutex_unlock(&host->thread_lock); |
| return IRQ_HANDLED; |
| } |
| } |
| } |
| |
| host->wait_for = MMCIF_WAIT_FOR_REQUEST; |
| host->state = STATE_IDLE; |
| host->mrq = NULL; |
| mmc_request_done(host->mmc, mrq); |
| |
| mutex_unlock(&host->thread_lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t sh_mmcif_intr(int irq, void *dev_id) |
| { |
| struct sh_mmcif_host *host = dev_id; |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| u32 state, mask; |
| |
| state = sh_mmcif_readl(host->addr, MMCIF_CE_INT); |
| mask = sh_mmcif_readl(host->addr, MMCIF_CE_INT_MASK); |
| if (host->ccs_enable) |
| sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~(state & mask)); |
| else |
| sh_mmcif_writel(host->addr, MMCIF_CE_INT, INT_CCS | ~(state & mask)); |
| sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state & MASK_CLEAN); |
| |
| if (state & ~MASK_CLEAN) |
| dev_dbg(dev, "IRQ state = 0x%08x incompletely cleared\n", |
| state); |
| |
| if (state & INT_ERR_STS || state & ~INT_ALL) { |
| host->sd_error = true; |
| dev_dbg(dev, "int err state = 0x%08x\n", state); |
| } |
| if (state & ~(INT_CMD12RBE | INT_CMD12CRE)) { |
| if (!host->mrq) |
| dev_dbg(dev, "NULL IRQ state = 0x%08x\n", state); |
| if (!host->dma_active) |
| return IRQ_WAKE_THREAD; |
| else if (host->sd_error) |
| sh_mmcif_dma_complete(host); |
| } else { |
| dev_dbg(dev, "Unexpected IRQ 0x%x\n", state); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void sh_mmcif_timeout_work(struct work_struct *work) |
| { |
| struct delayed_work *d = to_delayed_work(work); |
| struct sh_mmcif_host *host = container_of(d, struct sh_mmcif_host, timeout_work); |
| struct mmc_request *mrq = host->mrq; |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| unsigned long flags; |
| |
| if (host->dying) |
| /* Don't run after mmc_remove_host() */ |
| return; |
| |
| spin_lock_irqsave(&host->lock, flags); |
| if (host->state == STATE_IDLE) { |
| spin_unlock_irqrestore(&host->lock, flags); |
| return; |
| } |
| |
| dev_err(dev, "Timeout waiting for %u on CMD%u\n", |
| host->wait_for, mrq->cmd->opcode); |
| |
| host->state = STATE_TIMEOUT; |
| spin_unlock_irqrestore(&host->lock, flags); |
| |
| /* |
| * Handle races with cancel_delayed_work(), unless |
| * cancel_delayed_work_sync() is used |
| */ |
| switch (host->wait_for) { |
| case MMCIF_WAIT_FOR_CMD: |
| mrq->cmd->error = sh_mmcif_error_manage(host); |
| break; |
| case MMCIF_WAIT_FOR_STOP: |
| mrq->stop->error = sh_mmcif_error_manage(host); |
| break; |
| case MMCIF_WAIT_FOR_MREAD: |
| case MMCIF_WAIT_FOR_MWRITE: |
| case MMCIF_WAIT_FOR_READ: |
| case MMCIF_WAIT_FOR_WRITE: |
| case MMCIF_WAIT_FOR_READ_END: |
| case MMCIF_WAIT_FOR_WRITE_END: |
| mrq->data->error = sh_mmcif_error_manage(host); |
| break; |
| default: |
| BUG(); |
| } |
| |
| host->state = STATE_IDLE; |
| host->wait_for = MMCIF_WAIT_FOR_REQUEST; |
| host->mrq = NULL; |
| mmc_request_done(host->mmc, mrq); |
| } |
| |
| static void sh_mmcif_init_ocr(struct sh_mmcif_host *host) |
| { |
| struct device *dev = sh_mmcif_host_to_dev(host); |
| struct sh_mmcif_plat_data *pd = dev->platform_data; |
| struct mmc_host *mmc = host->mmc; |
| |
| mmc_regulator_get_supply(mmc); |
| |
| if (!pd) |
| return; |
| |
| if (!mmc->ocr_avail) |
| mmc->ocr_avail = pd->ocr; |
| else if (pd->ocr) |
| dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n"); |
| } |
| |
| static int sh_mmcif_probe(struct platform_device *pdev) |
| { |
| int ret = 0, irq[2]; |
| struct mmc_host *mmc; |
| struct sh_mmcif_host *host; |
| struct device *dev = &pdev->dev; |
| struct sh_mmcif_plat_data *pd = dev->platform_data; |
| void __iomem *reg; |
| const char *name; |
| |
| irq[0] = platform_get_irq(pdev, 0); |
| irq[1] = platform_get_irq_optional(pdev, 1); |
| if (irq[0] < 0) |
| return irq[0]; |
| |
| reg = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(reg)) |
| return PTR_ERR(reg); |
| |
| mmc = mmc_alloc_host(sizeof(struct sh_mmcif_host), dev); |
| if (!mmc) |
| return -ENOMEM; |
| |
| ret = mmc_of_parse(mmc); |
| if (ret < 0) |
| goto err_host; |
| |
| host = mmc_priv(mmc); |
| host->mmc = mmc; |
| host->addr = reg; |
| host->timeout = msecs_to_jiffies(10000); |
| host->ccs_enable = true; |
| host->clk_ctrl2_enable = false; |
| |
| host->pd = pdev; |
| |
| spin_lock_init(&host->lock); |
| |
| mmc->ops = &sh_mmcif_ops; |
| sh_mmcif_init_ocr(host); |
| |
| mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_WAIT_WHILE_BUSY; |
| mmc->caps2 |= MMC_CAP2_NO_SD | MMC_CAP2_NO_SDIO; |
| mmc->max_busy_timeout = 10000; |
| |
| if (pd && pd->caps) |
| mmc->caps |= pd->caps; |
| mmc->max_segs = 32; |
| mmc->max_blk_size = 512; |
| mmc->max_req_size = PAGE_SIZE * mmc->max_segs; |
| mmc->max_blk_count = mmc->max_req_size / mmc->max_blk_size; |
| mmc->max_seg_size = mmc->max_req_size; |
| |
| platform_set_drvdata(pdev, host); |
| |
| host->clk = devm_clk_get(dev, NULL); |
| if (IS_ERR(host->clk)) { |
| ret = PTR_ERR(host->clk); |
| dev_err(dev, "cannot get clock: %d\n", ret); |
| goto err_host; |
| } |
| |
| ret = clk_prepare_enable(host->clk); |
| if (ret < 0) |
| goto err_host; |
| |
| sh_mmcif_clk_setup(host); |
| |
| pm_runtime_enable(dev); |
| host->power = false; |
| |
| ret = pm_runtime_get_sync(dev); |
| if (ret < 0) |
| goto err_clk; |
| |
| INIT_DELAYED_WORK(&host->timeout_work, sh_mmcif_timeout_work); |
| |
| sh_mmcif_sync_reset(host); |
| sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL); |
| |
| name = irq[1] < 0 ? dev_name(dev) : "sh_mmc:error"; |
| ret = devm_request_threaded_irq(dev, irq[0], sh_mmcif_intr, |
| sh_mmcif_irqt, 0, name, host); |
| if (ret) { |
| dev_err(dev, "request_irq error (%s)\n", name); |
| goto err_clk; |
| } |
| if (irq[1] >= 0) { |
| ret = devm_request_threaded_irq(dev, irq[1], |
| sh_mmcif_intr, sh_mmcif_irqt, |
| 0, "sh_mmc:int", host); |
| if (ret) { |
| dev_err(dev, "request_irq error (sh_mmc:int)\n"); |
| goto err_clk; |
| } |
| } |
| |
| mutex_init(&host->thread_lock); |
| |
| ret = mmc_add_host(mmc); |
| if (ret < 0) |
| goto err_clk; |
| |
| dev_pm_qos_expose_latency_limit(dev, 100); |
| |
| dev_info(dev, "Chip version 0x%04x, clock rate %luMHz\n", |
| sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0xffff, |
| clk_get_rate(host->clk) / 1000000UL); |
| |
| pm_runtime_put(dev); |
| clk_disable_unprepare(host->clk); |
| return ret; |
| |
| err_clk: |
| clk_disable_unprepare(host->clk); |
| pm_runtime_put_sync(dev); |
| pm_runtime_disable(dev); |
| err_host: |
| mmc_free_host(mmc); |
| return ret; |
| } |
| |
| static void sh_mmcif_remove(struct platform_device *pdev) |
| { |
| struct sh_mmcif_host *host = platform_get_drvdata(pdev); |
| |
| host->dying = true; |
| clk_prepare_enable(host->clk); |
| pm_runtime_get_sync(&pdev->dev); |
| |
| dev_pm_qos_hide_latency_limit(&pdev->dev); |
| |
| mmc_remove_host(host->mmc); |
| sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL); |
| |
| /* |
| * FIXME: cancel_delayed_work(_sync)() and free_irq() race with the |
| * mmc_remove_host() call above. But swapping order doesn't help either |
| * (a query on the linux-mmc mailing list didn't bring any replies). |
| */ |
| cancel_delayed_work_sync(&host->timeout_work); |
| |
| clk_disable_unprepare(host->clk); |
| mmc_free_host(host->mmc); |
| pm_runtime_put_sync(&pdev->dev); |
| pm_runtime_disable(&pdev->dev); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int sh_mmcif_suspend(struct device *dev) |
| { |
| struct sh_mmcif_host *host = dev_get_drvdata(dev); |
| |
| pm_runtime_get_sync(dev); |
| sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL); |
| pm_runtime_put(dev); |
| |
| return 0; |
| } |
| |
| static int sh_mmcif_resume(struct device *dev) |
| { |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops sh_mmcif_dev_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(sh_mmcif_suspend, sh_mmcif_resume) |
| }; |
| |
| static struct platform_driver sh_mmcif_driver = { |
| .probe = sh_mmcif_probe, |
| .remove_new = sh_mmcif_remove, |
| .driver = { |
| .name = DRIVER_NAME, |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .pm = &sh_mmcif_dev_pm_ops, |
| .of_match_table = sh_mmcif_of_match, |
| }, |
| }; |
| |
| module_platform_driver(sh_mmcif_driver); |
| |
| MODULE_DESCRIPTION("SuperH on-chip MMC/eMMC interface driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |
| MODULE_AUTHOR("Yusuke Goda <yusuke.goda.sx@renesas.com>"); |