| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board |
| * |
| * Copyright (c) 2017, Microchip Technology Inc. |
| * 2017 Cristian Birsan <cristian.birsan@microchip.com> |
| * 2017 Claudiu Beznea <claudiu.beznea@microchip.com> |
| */ |
| #include "sama5d2.dtsi" |
| #include "sama5d2-pinfunc.h" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Atmel SAMA5D27 SoM1"; |
| compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; |
| |
| aliases { |
| i2c0 = &i2c0; |
| }; |
| |
| clocks { |
| slow_xtal { |
| clock-frequency = <32768>; |
| }; |
| |
| main_xtal { |
| clock-frequency = <24000000>; |
| }; |
| }; |
| |
| ahb { |
| sdmmc0: sdio-host@a0000000 { |
| microchip,sdcal-inverted; |
| }; |
| |
| apb { |
| qspi1: spi@f0024000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_qspi1_default>; |
| |
| flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <80000000>; |
| spi-tx-bus-width = <4>; |
| spi-rx-bus-width = <4>; |
| m25p,fast-read; |
| |
| at91bootstrap@0 { |
| label = "at91bootstrap"; |
| reg = <0x00000000 0x00040000>; |
| }; |
| |
| bootloader@40000 { |
| label = "bootloader"; |
| reg = <0x00040000 0x000c0000>; |
| }; |
| |
| bootloaderenvred@100000 { |
| label = "bootloader env redundant"; |
| reg = <0x00100000 0x00040000>; |
| }; |
| |
| bootloaderenv@140000 { |
| label = "bootloader env"; |
| reg = <0x00140000 0x00040000>; |
| }; |
| |
| dtb@180000 { |
| label = "device tree"; |
| reg = <0x00180000 0x00080000>; |
| }; |
| |
| kernel@200000 { |
| label = "kernel"; |
| reg = <0x00200000 0x00600000>; |
| }; |
| }; |
| }; |
| |
| macb0: ethernet@f8008000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_macb0_default>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| phy-mode = "rmii"; |
| |
| ethernet-phy@7 { |
| reg = <0x7>; |
| interrupt-parent = <&pioA>; |
| interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_macb0_phy_irq>; |
| }; |
| }; |
| |
| i2c0: i2c@f8028000 { |
| dmas = <0>, <0>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c0_default>; |
| pinctrl-1 = <&pinctrl_i2c0_gpio>; |
| sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; |
| scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| |
| at24@50 { |
| compatible = "atmel,24c02"; |
| reg = <0x50>; |
| pagesize = <8>; |
| }; |
| }; |
| |
| pinctrl@fc038000 { |
| pinctrl_i2c0_default: i2c0_default { |
| pinmux = <PIN_PD21__TWD0>, |
| <PIN_PD22__TWCK0>; |
| bias-disable; |
| }; |
| |
| pinctrl_i2c0_gpio: i2c0_gpio { |
| pinmux = <PIN_PD21__GPIO>, |
| <PIN_PD22__GPIO>; |
| bias-disable; |
| }; |
| |
| pinctrl_qspi1_default: qspi1_default { |
| sck_cs { |
| pinmux = <PIN_PB5__QSPI1_SCK>, |
| <PIN_PB6__QSPI1_CS>; |
| bias-disable; |
| }; |
| |
| data { |
| pinmux = <PIN_PB7__QSPI1_IO0>, |
| <PIN_PB8__QSPI1_IO1>, |
| <PIN_PB9__QSPI1_IO2>, |
| <PIN_PB10__QSPI1_IO3>; |
| bias-pull-up; |
| }; |
| }; |
| |
| pinctrl_macb0_default: macb0_default { |
| pinmux = <PIN_PD9__GTXCK>, |
| <PIN_PD10__GTXEN>, |
| <PIN_PD11__GRXDV>, |
| <PIN_PD12__GRXER>, |
| <PIN_PD13__GRX0>, |
| <PIN_PD14__GRX1>, |
| <PIN_PD15__GTX0>, |
| <PIN_PD16__GTX1>, |
| <PIN_PD17__GMDC>, |
| <PIN_PD18__GMDIO>; |
| bias-disable; |
| }; |
| |
| pinctrl_macb0_phy_irq: macb0_phy_irq { |
| pinmux = <PIN_PD31__GPIO>; |
| bias-disable; |
| }; |
| }; |
| }; |
| }; |
| }; |