| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| /* |
| * Copyright (c) 2021 Protonic Holland |
| */ |
| |
| / { |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpiokeys>; |
| autorepeat; |
| |
| power { |
| label = "Power Button"; |
| gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_POWER>; |
| wakeup-source; |
| }; |
| }; |
| |
| panel { |
| compatible = "kyo,tcg121xglp"; |
| backlight = <&backlight_lcd>; |
| power-supply = <®_3v3>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&lvds0_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <&rgmii_phy>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* Microchip KSZ9031RNX PHY */ |
| rgmii_phy: ethernet-phy@0 { |
| reg = <0>; |
| interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; |
| reset-assert-us = <10000>; |
| reset-deassert-us = <300>; |
| }; |
| }; |
| }; |
| |
| &gpio1 { |
| gpio-line-names = |
| "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR", |
| "CAM2_MIRROR", "", "", "SMBALERT", |
| "DEBUG_0", "DEBUG_1", "", "", "", "", "", "", |
| "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK", |
| "SD1_DATA3", "ETH_MDIO", "", |
| "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC"; |
| }; |
| |
| &gpio4 { |
| gpio-line-names = |
| "", "", "", "", "", "", "UART4_TXD", "UART4_RXD", |
| "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR", |
| "CAN2_SR", "CAN2_TX", "CAN2_RX", |
| "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL", |
| "HITCH_IN_OUT", |
| "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "", |
| "ISB_LED"; |
| }; |
| |
| &gpio5 { |
| gpio-line-names = |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", "", |
| "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET", |
| "I2S_BITCLK", "I2S_DOUT", |
| "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX", |
| "YACO_AUX_TX", "ITU656_D0", "ITU656_D1"; |
| }; |
| |
| &gpio6 { |
| gpio-line-names = |
| "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5", |
| "ITU656_D6", "ITU656_D7", "", "", |
| "", "", "", "", "", "", "", "", |
| "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2", |
| "RGMII_TD3", |
| "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1", |
| "RGMII_RD2", "RGMII_RD3", "", ""; |
| }; |
| |
| &iomuxc { |
| pinctrl_enet: enetgrp { |
| fsl,pins = < |
| MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 |
| MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 |
| MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 |
| MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 |
| MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 |
| MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 |
| MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 |
| MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 |
| MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 |
| /* Phy reset */ |
| MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 |
| MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 |
| >; |
| }; |
| |
| pinctrl_gpiokeys: gpiokeygrp { |
| fsl,pins = < |
| /* nON_SWITCH */ |
| MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0 |
| >; |
| }; |
| }; |
