| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC |
| * |
| * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries |
| * |
| * Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> |
| * |
| */ |
| |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/mfd/atmel-flexcom.h> |
| #include <dt-bindings/dma/at91.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/clock/microchip,lan966x.h> |
| |
| / { |
| model = "Microchip LAN966 family SoC"; |
| compatible = "microchip,lan966"; |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| clock-frequency = <600000000>; |
| reg = <0x0>; |
| }; |
| }; |
| |
| clocks { |
| sys_clk: sys_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <165625000>; |
| }; |
| |
| cpu_clk: cpu_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <600000000>; |
| }; |
| |
| ddr_clk: ddr_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <300000000>; |
| }; |
| |
| nic_clk: nic_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <200000000>; |
| }; |
| }; |
| |
| clks: clock-controller@e00c00a8 { |
| compatible = "microchip,lan966x-gck"; |
| #clock-cells = <1>; |
| clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>; |
| clock-names = "cpu", "ddr", "sys"; |
| reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; |
| clock-frequency = <37500000>; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| udc: usb@200000 { |
| compatible = "microchip,lan9662-udc", |
| "atmel,sama5d3-udc"; |
| reg = <0x00200000 0x80000>, |
| <0xe0808000 0x400>; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clks GCK_GATE_UDPHS>, <&nic_clk>; |
| clock-names = "pclk", "hclk"; |
| status = "disabled"; |
| }; |
| |
| switch: switch@e0000000 { |
| compatible = "microchip,lan966x-switch"; |
| reg = <0xe0000000 0x0100000>, |
| <0xe2000000 0x0800000>; |
| reg-names = "cpu", "gcb"; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "xtr", "fdma", "ana", "ptp", |
| "ptp-ext"; |
| resets = <&reset 0>; |
| reset-names = "switch"; |
| status = "disabled"; |
| |
| ethernet-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port0: port@0 { |
| reg = <0>; |
| status = "disabled"; |
| }; |
| |
| port1: port@1 { |
| reg = <1>; |
| status = "disabled"; |
| }; |
| |
| port2: port@2 { |
| reg = <2>; |
| status = "disabled"; |
| }; |
| |
| port3: port@3 { |
| reg = <3>; |
| status = "disabled"; |
| }; |
| |
| port4: port@4 { |
| reg = <4>; |
| status = "disabled"; |
| }; |
| |
| port5: port@5 { |
| reg = <5>; |
| status = "disabled"; |
| }; |
| |
| port6: port@6 { |
| reg = <6>; |
| status = "disabled"; |
| }; |
| |
| port7: port@7 { |
| reg = <7>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| flx0: flexcom@e0040000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe0040000 0x100>; |
| clocks = <&clks GCK_ID_FLEXCOM0>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe0040000 0x800>; |
| status = "disabled"; |
| |
| usart0: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, |
| <&dma0 AT91_XDMAC_DT_PERID(2)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| clock-names = "usart"; |
| atmel,fifo-size = <32>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@400 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0x400 0x200>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, |
| <&dma0 AT91_XDMAC_DT_PERID(2)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| clock-names = "spi_clk"; |
| atmel,fifo-size = <32>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@600 { |
| compatible = "microchip,sam9x60-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>, |
| <&dma0 AT91_XDMAC_DT_PERID(2)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx1: flexcom@e0044000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe0044000 0x100>; |
| clocks = <&clks GCK_ID_FLEXCOM1>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe0044000 0x800>; |
| status = "disabled"; |
| |
| usart1: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, |
| <&dma0 AT91_XDMAC_DT_PERID(4)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| clock-names = "usart"; |
| atmel,fifo-size = <32>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@400 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0x400 0x200>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, |
| <&dma0 AT91_XDMAC_DT_PERID(4)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| clock-names = "spi_clk"; |
| atmel,fifo-size = <32>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@600 { |
| compatible = "microchip,sam9x60-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>, |
| <&dma0 AT91_XDMAC_DT_PERID(4)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| trng: rng@e0048000 { |
| compatible = "atmel,at91sam9g45-trng"; |
| reg = <0xe0048000 0x100>; |
| clocks = <&nic_clk>; |
| }; |
| |
| aes: crypto@e004c000 { |
| compatible = "atmel,at91sam9g46-aes"; |
| reg = <0xe004c000 0x100>; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>, |
| <&dma0 AT91_XDMAC_DT_PERID(13)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| clock-names = "aes_clk"; |
| }; |
| |
| flx2: flexcom@e0060000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe0060000 0x100>; |
| clocks = <&clks GCK_ID_FLEXCOM2>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe0060000 0x800>; |
| status = "disabled"; |
| |
| usart2: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, |
| <&dma0 AT91_XDMAC_DT_PERID(6)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| clock-names = "usart"; |
| atmel,fifo-size = <32>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@400 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0x400 0x200>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, |
| <&dma0 AT91_XDMAC_DT_PERID(6)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| clock-names = "spi_clk"; |
| atmel,fifo-size = <32>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@600 { |
| compatible = "microchip,sam9x60-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, |
| <&dma0 AT91_XDMAC_DT_PERID(6)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx3: flexcom@e0064000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe0064000 0x100>; |
| clocks = <&clks GCK_ID_FLEXCOM3>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe0064000 0x800>; |
| status = "disabled"; |
| |
| usart3: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, |
| <&dma0 AT91_XDMAC_DT_PERID(8)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| clock-names = "usart"; |
| atmel,fifo-size = <32>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@400 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0x400 0x200>; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, |
| <&dma0 AT91_XDMAC_DT_PERID(8)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| clock-names = "spi_clk"; |
| atmel,fifo-size = <32>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@600 { |
| compatible = "microchip,sam9x60-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>, |
| <&dma0 AT91_XDMAC_DT_PERID(8)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| dma0: dma-controller@e0068000 { |
| compatible = "microchip,sama7g5-dma"; |
| reg = <0xe0068000 0x1000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| clocks = <&nic_clk>; |
| clock-names = "dma_clk"; |
| }; |
| |
| sha: crypto@e006c000 { |
| compatible = "atmel,at91sam9g46-sha"; |
| reg = <0xe006c000 0xec>; |
| interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>; |
| dma-names = "tx"; |
| clocks = <&nic_clk>; |
| clock-names = "sha_clk"; |
| }; |
| |
| flx4: flexcom@e0070000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xe0070000 0x100>; |
| clocks = <&clks GCK_ID_FLEXCOM4>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xe0070000 0x800>; |
| status = "disabled"; |
| |
| usart4: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, |
| <&dma0 AT91_XDMAC_DT_PERID(10)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| clock-names = "usart"; |
| atmel,fifo-size = <32>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@400 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0x400 0x200>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, |
| <&dma0 AT91_XDMAC_DT_PERID(10)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| clock-names = "spi_clk"; |
| atmel,fifo-size = <32>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@600 { |
| compatible = "microchip,sam9x60-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>, |
| <&dma0 AT91_XDMAC_DT_PERID(10)>; |
| dma-names = "tx", "rx"; |
| clocks = <&nic_clk>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| timer0: timer@e008c000 { |
| compatible = "snps,dw-apb-timer"; |
| reg = <0xe008c000 0x400>; |
| clocks = <&nic_clk>; |
| clock-names = "timer"; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| watchdog: watchdog@e0090000 { |
| compatible = "snps,dw-wdt"; |
| reg = <0xe0090000 0x1000>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&nic_clk>; |
| status = "disabled"; |
| }; |
| |
| cpu_ctrl: syscon@e00c0000 { |
| compatible = "microchip,lan966x-cpu-syscon", "syscon"; |
| reg = <0xe00c0000 0x350>; |
| }; |
| |
| can0: can@e081c000 { |
| compatible = "bosch,m_can"; |
| reg = <0xe081c000 0xfc>, <0x00100000 0x4000>; |
| reg-names = "m_can", "message_ram"; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "int0", "int1"; |
| clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>; |
| clock-names = "hclk", "cclk"; |
| assigned-clocks = <&clks GCK_ID_MCAN0>; |
| assigned-clock-rates = <40000000>; |
| bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; |
| status = "disabled"; |
| }; |
| |
| can1: can@e0820000 { |
| compatible = "bosch,m_can"; |
| reg = <0xe0820000 0xfc>, <0x00100000 0x8000>; |
| reg-names = "m_can", "message_ram"; |
| interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "int0", "int1"; |
| clocks = <&clks GCK_ID_MCAN1>, <&clks GCK_ID_MCAN1>; |
| clock-names = "hclk", "cclk"; |
| assigned-clocks = <&clks GCK_ID_MCAN1>; |
| assigned-clock-rates = <40000000>; |
| bosch,mram-cfg = <0x4000 0 0 64 0 0 32 32>; |
| status = "disabled"; |
| }; |
| |
| reset: reset-controller@e200400c { |
| compatible = "microchip,lan966x-switch-reset"; |
| reg = <0xe200400c 0x4>; |
| reg-names = "gcb"; |
| #reset-cells = <1>; |
| cpu-syscon = <&cpu_ctrl>; |
| }; |
| |
| gpio: pinctrl@e2004064 { |
| compatible = "microchip,lan966x-pinctrl"; |
| reg = <0xe2004064 0xb4>, |
| <0xe2010024 0x138>; |
| resets = <&reset 0>; |
| reset-names = "switch"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&gpio 0 0 78>; |
| interrupt-controller; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <2>; |
| }; |
| |
| mdio0: mdio@e2004118 { |
| compatible = "microchip,lan966x-miim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xe2004118 0x24>; |
| clocks = <&sys_clk>; |
| status = "disabled"; |
| }; |
| |
| mdio1: mdio@e200413c { |
| compatible = "microchip,lan966x-miim"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xe200413c 0x24>, |
| <0xe2010020 0x4>; |
| clocks = <&sys_clk>; |
| status = "disabled"; |
| |
| phy0: ethernet-phy@1 { |
| reg = <1>; |
| interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| phy1: ethernet-phy@2 { |
| reg = <2>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| }; |
| |
| sgpio: gpio@e2004190 { |
| compatible = "microchip,sparx5-sgpio"; |
| reg = <0xe2004190 0x118>; |
| clocks = <&sys_clk>; |
| resets = <&reset 0>; |
| reset-names = "switch"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| sgpio_in: gpio@0 { |
| compatible = "microchip,sparx5-sgpio-bank"; |
| reg = <0>; |
| gpio-controller; |
| #gpio-cells = <3>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| }; |
| |
| sgpio_out: gpio@1 { |
| compatible = "microchip,sparx5-sgpio-bank"; |
| reg = <1>; |
| gpio-controller; |
| #gpio-cells = <3>; |
| }; |
| }; |
| |
| hwmon: hwmon@e2010180 { |
| compatible = "microchip,lan9668-hwmon"; |
| reg = <0xe2010180 0xc>, |
| <0xe20042a8 0xc>; |
| reg-names = "pvt", "fan"; |
| clocks = <&sys_clk>; |
| }; |
| |
| serdes: serdes@e202c000 { |
| compatible = "microchip,lan966x-serdes"; |
| reg = <0xe202c000 0x9c>, |
| <0xe2004010 0x4>; |
| #phy-cells = <2>; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@e8c11000 { |
| compatible = "arm,gic-400", "arm,cortex-a7-gic"; |
| #interrupt-cells = <3>; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-controller; |
| reg = <0xe8c11000 0x1000>, |
| <0xe8c12000 0x2000>, |
| <0xe8c14000 0x2000>, |
| <0xe8c16000 0x2000>; |
| }; |
| }; |
| }; |
