| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Device Tree Source for OMAP4460 SoC |
| * |
| * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| #include "omap4.dtsi" |
| |
| / { |
| cpus { |
| /* OMAP446x 'standard device' variants OPP50 to OPPTurbo */ |
| cpu0: cpu@0 { |
| operating-points = < |
| /* kHz uV */ |
| 350000 1025000 |
| 700000 1200000 |
| 920000 1313000 |
| >; |
| clock-latency = <300000>; /* From legacy driver */ |
| |
| /* cooling options */ |
| #cooling-cells = <2>; /* min followed by max */ |
| }; |
| }; |
| |
| thermal-zones { |
| #include "omap4-cpu-thermal.dtsi" |
| }; |
| |
| ocp { |
| bandgap: bandgap@4a002260 { |
| reg = <0x4a002260 0x4 |
| 0x4a00232C 0x4 |
| 0x4a002378 0x18>; |
| compatible = "ti,omap4460-bandgap"; |
| interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */ |
| gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */ |
| |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| abb_mpu: regulator-abb-mpu { |
| status = "okay"; |
| |
| reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>, |
| <0x4A002268 0x4>; |
| reg-names = "base-address", "int-address", |
| "efuse-address"; |
| |
| ti,abb_info = < |
| /*uV ABB efuse rbb_m fbb_m vset_m*/ |
| 1025000 0 0 0 0 0 |
| 1200000 0 0 0 0 0 |
| 1313000 0 0 0x100000 0x40000 0 |
| 1375000 1 0 0 0 0 |
| 1389000 1 0 0 0 0 |
| >; |
| }; |
| |
| abb_iva: regulator-abb-iva { |
| status = "okay"; |
| |
| reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>, |
| <0x4A002268 0x4>; |
| reg-names = "base-address", "int-address", |
| "efuse-address"; |
| |
| ti,abb_info = < |
| /*uV ABB efuse rbb_m fbb_m vset_m*/ |
| 950000 0 0 0 0 0 |
| 1140000 0 0 0 0 0 |
| 1291000 0 0 0x200000 0 0 |
| 1375000 1 0 0 0 0 |
| 1376000 1 0 0 0 0 |
| >; |
| }; |
| }; |
| |
| }; |
| |
| &cpu_thermal { |
| coefficients = <348 (-9301)>; |
| }; |
| |
| /* Only some L4 CFG interconnect ranges are different on 4460 */ |
| &l4_cfg_segment_300000 { |
| ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ |
| <0x00040000 0x00340000 0x001000>, /* ap 68 */ |
| <0x00020000 0x00320000 0x004000>, /* ap 71 */ |
| <0x00024000 0x00324000 0x002000>, /* ap 72 */ |
| <0x00026000 0x00326000 0x001000>, /* ap 73 */ |
| <0x00027000 0x00327000 0x001000>, /* ap 74 */ |
| <0x00028000 0x00328000 0x001000>, /* ap 75 */ |
| <0x00029000 0x00329000 0x001000>, /* ap 76 */ |
| <0x00030000 0x00330000 0x010000>, /* ap 77 */ |
| <0x0002a000 0x0032a000 0x002000>, /* ap 90 */ |
| <0x0002c000 0x0032c000 0x004000>, /* ap 91 */ |
| <0x00010000 0x00310000 0x008000>, /* ap 92 */ |
| <0x00018000 0x00318000 0x004000>, /* ap 93 */ |
| <0x0001c000 0x0031c000 0x002000>, /* ap 94 */ |
| <0x0001e000 0x0031e000 0x002000>; /* ap 95 */ |
| }; |
| |
| &l4_cfg_target_0 { |
| ranges = <0x00000000 0x00000000 0x00010000>, |
| <0x00010000 0x00010000 0x00008000>, |
| <0x00018000 0x00018000 0x00004000>, |
| <0x0001c000 0x0001c000 0x00002000>, |
| <0x0001e000 0x0001e000 0x00002000>, |
| <0x00020000 0x00020000 0x00004000>, |
| <0x00024000 0x00024000 0x00002000>, |
| <0x00026000 0x00026000 0x00001000>, |
| <0x00027000 0x00027000 0x00001000>, |
| <0x00028000 0x00028000 0x00001000>, |
| <0x00029000 0x00029000 0x00001000>, |
| <0x0002a000 0x0002a000 0x00002000>, |
| <0x0002c000 0x0002c000 0x00004000>, |
| <0x00030000 0x00030000 0x00010000>; |
| }; |
| |
| &pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| /include/ "omap446x-clocks.dtsi" |