| // SPDX-License-Identifier: GPL-2.0 |
| /dts-v1/; |
| |
| #include "tegra30-cardhu.dtsi" |
| |
| /* This dts file support the cardhu A04 and later versions of board */ |
| |
| / { |
| model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board"; |
| compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; |
| |
| mmc@78000400 { |
| status = "okay"; |
| power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; |
| bus-width = <4>; |
| keep-power-in-suspend; |
| }; |
| |
| ddr_reg: regulator-ddr { |
| compatible = "regulator-fixed"; |
| regulator-name = "ddr"; |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-always-on; |
| regulator-boot-on; |
| enable-active-high; |
| gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| sys_3v3_reg: regulator-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "sys_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| regulator-boot-on; |
| enable-active-high; |
| gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| usb1_vbus_reg: regulator-usb1 { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; |
| gpio-open-drain; |
| vin-supply = <&vdd_5v0_reg>; |
| }; |
| |
| usb3_vbus_reg: regulator-usb3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb3_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; |
| gpio-open-drain; |
| vin-supply = <&vdd_5v0_reg>; |
| }; |
| |
| vdd_5v0_reg: regulator-5v0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "5v0"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| enable-active-high; |
| gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| vdd_bl_reg: regulator-bl { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd_bl"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| enable-active-high; |
| gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; |
| }; |
| |
| vdd_bl2_reg: regulator-bl2 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd_bl2"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| enable-active-high; |
| gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
