| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/arch/arm/mach-pxa/colibri-evalboard.c |
| * |
| * Support for Toradex Colibri Evaluation Carrier Board |
| * Daniel Mack <daniel@caiaq.de> |
| * Marek Vasut <marek.vasut@gmail.com> |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/gpio/machine.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <linux/i2c.h> |
| #include <linux/platform_data/i2c-pxa.h> |
| #include <asm/io.h> |
| |
| #include "pxa27x.h" |
| #include "colibri.h" |
| #include <linux/platform_data/mmc-pxamci.h> |
| #include <linux/platform_data/usb-ohci-pxa27x.h> |
| #include "pxa27x-udc.h" |
| |
| #include "generic.h" |
| #include "devices.h" |
| |
| /****************************************************************************** |
| * SD/MMC card controller |
| ******************************************************************************/ |
| #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) |
| static struct pxamci_platform_data colibri_mci_platform_data = { |
| .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, |
| .detect_delay_ms = 200, |
| }; |
| |
| static struct gpiod_lookup_table colibri_pxa270_mci_gpio_table = { |
| .dev_id = "pxa2xx-mci.0", |
| .table = { |
| GPIO_LOOKUP("gpio-pxa", GPIO0_COLIBRI_PXA270_SD_DETECT, |
| "cd", GPIO_ACTIVE_LOW), |
| { }, |
| }, |
| }; |
| |
| static struct gpiod_lookup_table colibri_pxa300_mci_gpio_table = { |
| .dev_id = "pxa2xx-mci.0", |
| .table = { |
| GPIO_LOOKUP("gpio-pxa", GPIO13_COLIBRI_PXA300_SD_DETECT, |
| "cd", GPIO_ACTIVE_LOW), |
| { }, |
| }, |
| }; |
| |
| static struct gpiod_lookup_table colibri_pxa320_mci_gpio_table = { |
| .dev_id = "pxa2xx-mci.0", |
| .table = { |
| GPIO_LOOKUP("gpio-pxa", GPIO28_COLIBRI_PXA320_SD_DETECT, |
| "cd", GPIO_ACTIVE_LOW), |
| { }, |
| }, |
| }; |
| |
| static void __init colibri_mmc_init(void) |
| { |
| if (machine_is_colibri()) /* PXA270 Colibri */ |
| gpiod_add_lookup_table(&colibri_pxa270_mci_gpio_table); |
| if (machine_is_colibri300()) /* PXA300 Colibri */ |
| gpiod_add_lookup_table(&colibri_pxa300_mci_gpio_table); |
| else /* PXA320 Colibri */ |
| gpiod_add_lookup_table(&colibri_pxa320_mci_gpio_table); |
| |
| pxa_set_mci_info(&colibri_mci_platform_data); |
| } |
| #else |
| static inline void colibri_mmc_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * USB Host |
| ******************************************************************************/ |
| #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) |
| static int colibri_ohci_init(struct device *dev) |
| { |
| UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE; |
| return 0; |
| } |
| |
| static struct pxaohci_platform_data colibri_ohci_info = { |
| .port_mode = PMM_PERPORT_MODE, |
| .flags = ENABLE_PORT1 | |
| POWER_CONTROL_LOW | POWER_SENSE_LOW, |
| .init = colibri_ohci_init, |
| }; |
| |
| static void __init colibri_uhc_init(void) |
| { |
| /* Colibri PXA270 has two usb ports, TBA for 320 */ |
| if (machine_is_colibri()) |
| colibri_ohci_info.flags |= ENABLE_PORT2; |
| |
| pxa_set_ohci_info(&colibri_ohci_info); |
| } |
| #else |
| static inline void colibri_uhc_init(void) {} |
| #endif |
| |
| /****************************************************************************** |
| * I2C RTC |
| ******************************************************************************/ |
| #if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE) |
| static struct i2c_board_info __initdata colibri_i2c_devs[] = { |
| { |
| I2C_BOARD_INFO("m41t00", 0x68), |
| }, |
| }; |
| |
| static void __init colibri_rtc_init(void) |
| { |
| pxa_set_i2c_info(NULL); |
| i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs)); |
| } |
| #else |
| static inline void colibri_rtc_init(void) {} |
| #endif |
| |
| void __init colibri_evalboard_init(void) |
| { |
| pxa_set_ffuart_info(NULL); |
| pxa_set_btuart_info(NULL); |
| pxa_set_stuart_info(NULL); |
| |
| colibri_mmc_init(); |
| colibri_uhc_init(); |
| colibri_rtc_init(); |
| } |