| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * MPC86xx HPCN board specific routines |
| * |
| * Recode: ZHANG WEI <wei.zhang@freescale.com> |
| * Initial author: Xianghua Xiao <x.xiao@freescale.com> |
| * |
| * Copyright 2006 Freescale Semiconductor Inc. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/delay.h> |
| #include <linux/seq_file.h> |
| #include <linux/of_platform.h> |
| |
| #include <asm/time.h> |
| #include <asm/machdep.h> |
| #include <asm/pci-bridge.h> |
| #include <mm/mmu_decl.h> |
| #include <asm/udbg.h> |
| #include <asm/swiotlb.h> |
| |
| #include <asm/mpic.h> |
| |
| #include <sysdev/fsl_pci.h> |
| #include <sysdev/fsl_soc.h> |
| |
| #include "mpc86xx.h" |
| |
| #undef DEBUG |
| |
| #ifdef DEBUG |
| #define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0) |
| #else |
| #define DBG(fmt...) do { } while(0) |
| #endif |
| |
| #ifdef CONFIG_PCI |
| extern int uli_exclude_device(struct pci_controller *hose, |
| u_char bus, u_char devfn); |
| |
| static int mpc86xx_exclude_device(struct pci_controller *hose, |
| u_char bus, u_char devfn) |
| { |
| if (hose->dn == fsl_pci_primary) |
| return uli_exclude_device(hose, bus, devfn); |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| #endif /* CONFIG_PCI */ |
| |
| |
| static void __init |
| mpc86xx_hpcn_setup_arch(void) |
| { |
| if (ppc_md.progress) |
| ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0); |
| |
| #ifdef CONFIG_PCI |
| ppc_md.pci_exclude_device = mpc86xx_exclude_device; |
| #endif |
| |
| printk("MPC86xx HPCN board from Freescale Semiconductor\n"); |
| |
| #ifdef CONFIG_SMP |
| mpc86xx_smp_init(); |
| #endif |
| |
| fsl_pci_assign_primary(); |
| |
| swiotlb_detect_4g(); |
| } |
| |
| |
| static void |
| mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) |
| { |
| uint svid = mfspr(SPRN_SVR); |
| |
| seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); |
| |
| seq_printf(m, "SVR\t\t: 0x%x\n", svid); |
| } |
| |
| |
| /* |
| * Called very early, device-tree isn't unflattened |
| */ |
| static int __init mpc86xx_hpcn_probe(void) |
| { |
| if (of_machine_is_compatible("fsl,mpc8641hpcn")) |
| return 1; /* Looks good */ |
| |
| return 0; |
| } |
| |
| static const struct of_device_id of_bus_ids[] __initconst = { |
| { .compatible = "fsl,srio", }, |
| {}, |
| }; |
| |
| static int __init declare_of_platform_devices(void) |
| { |
| mpc86xx_common_publish_devices(); |
| of_platform_bus_probe(NULL, of_bus_ids, NULL); |
| |
| return 0; |
| } |
| machine_arch_initcall(mpc86xx_hpcn, declare_of_platform_devices); |
| |
| define_machine(mpc86xx_hpcn) { |
| .name = "MPC86xx HPCN", |
| .probe = mpc86xx_hpcn_probe, |
| .setup_arch = mpc86xx_hpcn_setup_arch, |
| .init_IRQ = mpc86xx_init_irq, |
| .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo, |
| .get_irq = mpic_get_irq, |
| .time_init = mpc86xx_time_init, |
| .calibrate_decr = generic_calibrate_decr, |
| .progress = udbg_progress, |
| #ifdef CONFIG_PCI |
| .pcibios_fixup_bus = fsl_pcibios_fixup_bus, |
| #endif |
| }; |