| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * PowerPC64 LPAR Configuration Information Driver |
| * |
| * Dave Engebretsen engebret@us.ibm.com |
| * Copyright (c) 2003 Dave Engebretsen |
| * Will Schmidt willschm@us.ibm.com |
| * SPLPAR updates, Copyright (c) 2003 Will Schmidt IBM Corporation. |
| * seq_file updates, Copyright (c) 2004 Will Schmidt IBM Corporation. |
| * Nathan Lynch nathanl@austin.ibm.com |
| * Added lparcfg_write, Copyright (C) 2004 Nathan Lynch IBM Corporation. |
| * |
| * This driver creates a proc file at /proc/ppc64/lparcfg which contains |
| * keyword - value pairs that specify the configuration of the partition. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/errno.h> |
| #include <linux/proc_fs.h> |
| #include <linux/init.h> |
| #include <linux/seq_file.h> |
| #include <linux/slab.h> |
| #include <linux/uaccess.h> |
| #include <linux/hugetlb.h> |
| #include <asm/lppaca.h> |
| #include <asm/hvcall.h> |
| #include <asm/firmware.h> |
| #include <asm/rtas.h> |
| #include <asm/time.h> |
| #include <asm/vdso_datapage.h> |
| #include <asm/vio.h> |
| #include <asm/mmu.h> |
| #include <asm/machdep.h> |
| #include <asm/drmem.h> |
| |
| #include "pseries.h" |
| |
| /* |
| * This isn't a module but we expose that to userspace |
| * via /proc so leave the definitions here |
| */ |
| #define MODULE_VERS "1.9" |
| #define MODULE_NAME "lparcfg" |
| |
| /* #define LPARCFG_DEBUG */ |
| |
| /* |
| * Track sum of all purrs across all processors. This is used to further |
| * calculate usage values by different applications |
| */ |
| static void cpu_get_purr(void *arg) |
| { |
| atomic64_t *sum = arg; |
| |
| atomic64_add(mfspr(SPRN_PURR), sum); |
| } |
| |
| static unsigned long get_purr(void) |
| { |
| atomic64_t purr = ATOMIC64_INIT(0); |
| |
| on_each_cpu(cpu_get_purr, &purr, 1); |
| |
| return atomic64_read(&purr); |
| } |
| |
| /* |
| * Methods used to fetch LPAR data when running on a pSeries platform. |
| */ |
| |
| struct hvcall_ppp_data { |
| u64 entitlement; |
| u64 unallocated_entitlement; |
| u16 group_num; |
| u16 pool_num; |
| u8 capped; |
| u8 weight; |
| u8 unallocated_weight; |
| u16 active_procs_in_pool; |
| u16 active_system_procs; |
| u16 phys_platform_procs; |
| u32 max_proc_cap_avail; |
| u32 entitled_proc_cap_avail; |
| }; |
| |
| /* |
| * H_GET_PPP hcall returns info in 4 parms. |
| * entitled_capacity,unallocated_capacity, |
| * aggregation, resource_capability). |
| * |
| * R4 = Entitled Processor Capacity Percentage. |
| * R5 = Unallocated Processor Capacity Percentage. |
| * R6 (AABBCCDDEEFFGGHH). |
| * XXXX - reserved (0) |
| * XXXX - reserved (0) |
| * XXXX - Group Number |
| * XXXX - Pool Number. |
| * R7 (IIJJKKLLMMNNOOPP). |
| * XX - reserved. (0) |
| * XX - bit 0-6 reserved (0). bit 7 is Capped indicator. |
| * XX - variable processor Capacity Weight |
| * XX - Unallocated Variable Processor Capacity Weight. |
| * XXXX - Active processors in Physical Processor Pool. |
| * XXXX - Processors active on platform. |
| * R8 (QQQQRRRRRRSSSSSS). if ibm,partition-performance-parameters-level >= 1 |
| * XXXX - Physical platform procs allocated to virtualization. |
| * XXXXXX - Max procs capacity % available to the partitions pool. |
| * XXXXXX - Entitled procs capacity % available to the |
| * partitions pool. |
| */ |
| static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data) |
| { |
| unsigned long rc; |
| unsigned long retbuf[PLPAR_HCALL9_BUFSIZE]; |
| |
| rc = plpar_hcall9(H_GET_PPP, retbuf); |
| |
| ppp_data->entitlement = retbuf[0]; |
| ppp_data->unallocated_entitlement = retbuf[1]; |
| |
| ppp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff; |
| ppp_data->pool_num = retbuf[2] & 0xffff; |
| |
| ppp_data->capped = (retbuf[3] >> 6 * 8) & 0x01; |
| ppp_data->weight = (retbuf[3] >> 5 * 8) & 0xff; |
| ppp_data->unallocated_weight = (retbuf[3] >> 4 * 8) & 0xff; |
| ppp_data->active_procs_in_pool = (retbuf[3] >> 2 * 8) & 0xffff; |
| ppp_data->active_system_procs = retbuf[3] & 0xffff; |
| |
| ppp_data->phys_platform_procs = retbuf[4] >> 6 * 8; |
| ppp_data->max_proc_cap_avail = (retbuf[4] >> 3 * 8) & 0xffffff; |
| ppp_data->entitled_proc_cap_avail = retbuf[4] & 0xffffff; |
| |
| return rc; |
| } |
| |
| static void show_gpci_data(struct seq_file *m) |
| { |
| struct hv_gpci_request_buffer *buf; |
| unsigned int affinity_score; |
| long ret; |
| |
| buf = kmalloc(sizeof(*buf), GFP_KERNEL); |
| if (buf == NULL) |
| return; |
| |
| /* |
| * Show the local LPAR's affinity score. |
| * |
| * 0xB1 selects the Affinity_Domain_Info_By_Partition subcall. |
| * The score is at byte 0xB in the output buffer. |
| */ |
| memset(&buf->params, 0, sizeof(buf->params)); |
| buf->params.counter_request = cpu_to_be32(0xB1); |
| buf->params.starting_index = cpu_to_be32(-1); /* local LPAR */ |
| buf->params.counter_info_version_in = 0x5; /* v5+ for score */ |
| ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO, virt_to_phys(buf), |
| sizeof(*buf)); |
| if (ret != H_SUCCESS) { |
| pr_debug("hcall failed: H_GET_PERF_COUNTER_INFO: %ld, %x\n", |
| ret, be32_to_cpu(buf->params.detail_rc)); |
| goto out; |
| } |
| affinity_score = buf->bytes[0xB]; |
| seq_printf(m, "partition_affinity_score=%u\n", affinity_score); |
| out: |
| kfree(buf); |
| } |
| |
| static unsigned h_pic(unsigned long *pool_idle_time, |
| unsigned long *num_procs) |
| { |
| unsigned long rc; |
| unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; |
| |
| rc = plpar_hcall(H_PIC, retbuf); |
| |
| *pool_idle_time = retbuf[0]; |
| *num_procs = retbuf[1]; |
| |
| return rc; |
| } |
| |
| /* |
| * parse_ppp_data |
| * Parse out the data returned from h_get_ppp and h_pic |
| */ |
| static void parse_ppp_data(struct seq_file *m) |
| { |
| struct hvcall_ppp_data ppp_data; |
| struct device_node *root; |
| const __be32 *perf_level; |
| int rc; |
| |
| rc = h_get_ppp(&ppp_data); |
| if (rc) |
| return; |
| |
| seq_printf(m, "partition_entitled_capacity=%lld\n", |
| ppp_data.entitlement); |
| seq_printf(m, "group=%d\n", ppp_data.group_num); |
| seq_printf(m, "system_active_processors=%d\n", |
| ppp_data.active_system_procs); |
| |
| /* pool related entries are appropriate for shared configs */ |
| if (lppaca_shared_proc(get_lppaca())) { |
| unsigned long pool_idle_time, pool_procs; |
| |
| seq_printf(m, "pool=%d\n", ppp_data.pool_num); |
| |
| /* report pool_capacity in percentage */ |
| seq_printf(m, "pool_capacity=%d\n", |
| ppp_data.active_procs_in_pool * 100); |
| |
| h_pic(&pool_idle_time, &pool_procs); |
| seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time); |
| seq_printf(m, "pool_num_procs=%ld\n", pool_procs); |
| } |
| |
| seq_printf(m, "unallocated_capacity_weight=%d\n", |
| ppp_data.unallocated_weight); |
| seq_printf(m, "capacity_weight=%d\n", ppp_data.weight); |
| seq_printf(m, "capped=%d\n", ppp_data.capped); |
| seq_printf(m, "unallocated_capacity=%lld\n", |
| ppp_data.unallocated_entitlement); |
| |
| /* The last bits of information returned from h_get_ppp are only |
| * valid if the ibm,partition-performance-parameters-level |
| * property is >= 1. |
| */ |
| root = of_find_node_by_path("/"); |
| if (root) { |
| perf_level = of_get_property(root, |
| "ibm,partition-performance-parameters-level", |
| NULL); |
| if (perf_level && (be32_to_cpup(perf_level) >= 1)) { |
| seq_printf(m, |
| "physical_procs_allocated_to_virtualization=%d\n", |
| ppp_data.phys_platform_procs); |
| seq_printf(m, "max_proc_capacity_available=%d\n", |
| ppp_data.max_proc_cap_avail); |
| seq_printf(m, "entitled_proc_capacity_available=%d\n", |
| ppp_data.entitled_proc_cap_avail); |
| } |
| |
| of_node_put(root); |
| } |
| } |
| |
| /** |
| * parse_mpp_data |
| * Parse out data returned from h_get_mpp |
| */ |
| static void parse_mpp_data(struct seq_file *m) |
| { |
| struct hvcall_mpp_data mpp_data; |
| int rc; |
| |
| rc = h_get_mpp(&mpp_data); |
| if (rc) |
| return; |
| |
| seq_printf(m, "entitled_memory=%ld\n", mpp_data.entitled_mem); |
| |
| if (mpp_data.mapped_mem != -1) |
| seq_printf(m, "mapped_entitled_memory=%ld\n", |
| mpp_data.mapped_mem); |
| |
| seq_printf(m, "entitled_memory_group_number=%d\n", mpp_data.group_num); |
| seq_printf(m, "entitled_memory_pool_number=%d\n", mpp_data.pool_num); |
| |
| seq_printf(m, "entitled_memory_weight=%d\n", mpp_data.mem_weight); |
| seq_printf(m, "unallocated_entitled_memory_weight=%d\n", |
| mpp_data.unallocated_mem_weight); |
| seq_printf(m, "unallocated_io_mapping_entitlement=%ld\n", |
| mpp_data.unallocated_entitlement); |
| |
| if (mpp_data.pool_size != -1) |
| seq_printf(m, "entitled_memory_pool_size=%ld bytes\n", |
| mpp_data.pool_size); |
| |
| seq_printf(m, "entitled_memory_loan_request=%ld\n", |
| mpp_data.loan_request); |
| |
| seq_printf(m, "backing_memory=%ld bytes\n", mpp_data.backing_mem); |
| } |
| |
| /** |
| * parse_mpp_x_data |
| * Parse out data returned from h_get_mpp_x |
| */ |
| static void parse_mpp_x_data(struct seq_file *m) |
| { |
| struct hvcall_mpp_x_data mpp_x_data; |
| |
| if (!firmware_has_feature(FW_FEATURE_XCMO)) |
| return; |
| if (h_get_mpp_x(&mpp_x_data)) |
| return; |
| |
| seq_printf(m, "coalesced_bytes=%ld\n", mpp_x_data.coalesced_bytes); |
| |
| if (mpp_x_data.pool_coalesced_bytes) |
| seq_printf(m, "pool_coalesced_bytes=%ld\n", |
| mpp_x_data.pool_coalesced_bytes); |
| if (mpp_x_data.pool_purr_cycles) |
| seq_printf(m, "coalesce_pool_purr=%ld\n", mpp_x_data.pool_purr_cycles); |
| if (mpp_x_data.pool_spurr_cycles) |
| seq_printf(m, "coalesce_pool_spurr=%ld\n", mpp_x_data.pool_spurr_cycles); |
| } |
| |
| /* |
| * PAPR defines, in section "7.3.16 System Parameters Option", the token 55 to |
| * read the LPAR name, and the largest output data to 4000 + 2 bytes length. |
| */ |
| #define SPLPAR_LPAR_NAME_TOKEN 55 |
| #define GET_SYS_PARM_BUF_SIZE 4002 |
| #if GET_SYS_PARM_BUF_SIZE > RTAS_DATA_BUF_SIZE |
| #error "GET_SYS_PARM_BUF_SIZE is larger than RTAS_DATA_BUF_SIZE" |
| #endif |
| |
| /* |
| * Read the lpar name using the RTAS ibm,get-system-parameter call. |
| * |
| * The name read through this call is updated if changes are made by the end |
| * user on the hypervisor side. |
| * |
| * Some hypervisor (like Qemu) may not provide this value. In that case, a non |
| * null value is returned. |
| */ |
| static int read_rtas_lpar_name(struct seq_file *m) |
| { |
| int rc, len, token; |
| union { |
| char raw_buffer[GET_SYS_PARM_BUF_SIZE]; |
| struct { |
| __be16 len; |
| char name[GET_SYS_PARM_BUF_SIZE-2]; |
| }; |
| } *local_buffer; |
| |
| token = rtas_token("ibm,get-system-parameter"); |
| if (token == RTAS_UNKNOWN_SERVICE) |
| return -EINVAL; |
| |
| local_buffer = kmalloc(sizeof(*local_buffer), GFP_KERNEL); |
| if (!local_buffer) |
| return -ENOMEM; |
| |
| do { |
| spin_lock(&rtas_data_buf_lock); |
| memset(rtas_data_buf, 0, sizeof(*local_buffer)); |
| rc = rtas_call(token, 3, 1, NULL, SPLPAR_LPAR_NAME_TOKEN, |
| __pa(rtas_data_buf), sizeof(*local_buffer)); |
| if (!rc) |
| memcpy(local_buffer->raw_buffer, rtas_data_buf, |
| sizeof(local_buffer->raw_buffer)); |
| spin_unlock(&rtas_data_buf_lock); |
| } while (rtas_busy_delay(rc)); |
| |
| if (!rc) { |
| /* Force end of string */ |
| len = min((int) be16_to_cpu(local_buffer->len), |
| (int) sizeof(local_buffer->name)-1); |
| local_buffer->name[len] = '\0'; |
| |
| seq_printf(m, "partition_name=%s\n", local_buffer->name); |
| } else |
| rc = -ENODATA; |
| |
| kfree(local_buffer); |
| return rc; |
| } |
| |
| /* |
| * Read the LPAR name from the Device Tree. |
| * |
| * The value read in the DT is not updated if the end-user is touching the LPAR |
| * name on the hypervisor side. |
| */ |
| static int read_dt_lpar_name(struct seq_file *m) |
| { |
| const char *name; |
| |
| if (of_property_read_string(of_root, "ibm,partition-name", &name)) |
| return -ENOENT; |
| |
| seq_printf(m, "partition_name=%s\n", name); |
| return 0; |
| } |
| |
| static void read_lpar_name(struct seq_file *m) |
| { |
| if (read_rtas_lpar_name(m) && read_dt_lpar_name(m)) |
| pr_err_once("Error can't get the LPAR name"); |
| } |
| |
| #define SPLPAR_CHARACTERISTICS_TOKEN 20 |
| #define SPLPAR_MAXLENGTH 1026*(sizeof(char)) |
| |
| /* |
| * parse_system_parameter_string() |
| * Retrieve the potential_processors, max_entitled_capacity and friends |
| * through the get-system-parameter rtas call. Replace keyword strings as |
| * necessary. |
| */ |
| static void parse_system_parameter_string(struct seq_file *m) |
| { |
| int call_status; |
| |
| unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); |
| if (!local_buffer) { |
| printk(KERN_ERR "%s %s kmalloc failure at line %d\n", |
| __FILE__, __func__, __LINE__); |
| return; |
| } |
| |
| spin_lock(&rtas_data_buf_lock); |
| memset(rtas_data_buf, 0, SPLPAR_MAXLENGTH); |
| call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, |
| NULL, |
| SPLPAR_CHARACTERISTICS_TOKEN, |
| __pa(rtas_data_buf), |
| RTAS_DATA_BUF_SIZE); |
| memcpy(local_buffer, rtas_data_buf, SPLPAR_MAXLENGTH); |
| local_buffer[SPLPAR_MAXLENGTH - 1] = '\0'; |
| spin_unlock(&rtas_data_buf_lock); |
| |
| if (call_status != 0) { |
| printk(KERN_INFO |
| "%s %s Error calling get-system-parameter (0x%x)\n", |
| __FILE__, __func__, call_status); |
| } else { |
| int splpar_strlen; |
| int idx, w_idx; |
| char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); |
| if (!workbuffer) { |
| printk(KERN_ERR "%s %s kmalloc failure at line %d\n", |
| __FILE__, __func__, __LINE__); |
| kfree(local_buffer); |
| return; |
| } |
| #ifdef LPARCFG_DEBUG |
| printk(KERN_INFO "success calling get-system-parameter\n"); |
| #endif |
| splpar_strlen = local_buffer[0] * 256 + local_buffer[1]; |
| local_buffer += 2; /* step over strlen value */ |
| |
| w_idx = 0; |
| idx = 0; |
| while ((*local_buffer) && (idx < splpar_strlen)) { |
| workbuffer[w_idx++] = local_buffer[idx++]; |
| if ((local_buffer[idx] == ',') |
| || (local_buffer[idx] == '\0')) { |
| workbuffer[w_idx] = '\0'; |
| if (w_idx) { |
| /* avoid the empty string */ |
| seq_printf(m, "%s\n", workbuffer); |
| } |
| memset(workbuffer, 0, SPLPAR_MAXLENGTH); |
| idx++; /* skip the comma */ |
| w_idx = 0; |
| } else if (local_buffer[idx] == '=') { |
| /* code here to replace workbuffer contents |
| with different keyword strings */ |
| if (0 == strcmp(workbuffer, "MaxEntCap")) { |
| strcpy(workbuffer, |
| "partition_max_entitled_capacity"); |
| w_idx = strlen(workbuffer); |
| } |
| if (0 == strcmp(workbuffer, "MaxPlatProcs")) { |
| strcpy(workbuffer, |
| "system_potential_processors"); |
| w_idx = strlen(workbuffer); |
| } |
| } |
| } |
| kfree(workbuffer); |
| local_buffer -= 2; /* back up over strlen value */ |
| } |
| kfree(local_buffer); |
| } |
| |
| /* Return the number of processors in the system. |
| * This function reads through the device tree and counts |
| * the virtual processors, this does not include threads. |
| */ |
| static int lparcfg_count_active_processors(void) |
| { |
| struct device_node *cpus_dn; |
| int count = 0; |
| |
| for_each_node_by_type(cpus_dn, "cpu") { |
| #ifdef LPARCFG_DEBUG |
| printk(KERN_ERR "cpus_dn %p\n", cpus_dn); |
| #endif |
| count++; |
| } |
| return count; |
| } |
| |
| static void pseries_cmo_data(struct seq_file *m) |
| { |
| int cpu; |
| unsigned long cmo_faults = 0; |
| unsigned long cmo_fault_time = 0; |
| |
| seq_printf(m, "cmo_enabled=%d\n", firmware_has_feature(FW_FEATURE_CMO)); |
| |
| if (!firmware_has_feature(FW_FEATURE_CMO)) |
| return; |
| |
| for_each_possible_cpu(cpu) { |
| cmo_faults += be64_to_cpu(lppaca_of(cpu).cmo_faults); |
| cmo_fault_time += be64_to_cpu(lppaca_of(cpu).cmo_fault_time); |
| } |
| |
| seq_printf(m, "cmo_faults=%lu\n", cmo_faults); |
| seq_printf(m, "cmo_fault_time_usec=%lu\n", |
| cmo_fault_time / tb_ticks_per_usec); |
| seq_printf(m, "cmo_primary_psp=%d\n", cmo_get_primary_psp()); |
| seq_printf(m, "cmo_secondary_psp=%d\n", cmo_get_secondary_psp()); |
| seq_printf(m, "cmo_page_size=%lu\n", cmo_get_page_size()); |
| } |
| |
| static void splpar_dispatch_data(struct seq_file *m) |
| { |
| int cpu; |
| unsigned long dispatches = 0; |
| unsigned long dispatch_dispersions = 0; |
| |
| for_each_possible_cpu(cpu) { |
| dispatches += be32_to_cpu(lppaca_of(cpu).yield_count); |
| dispatch_dispersions += |
| be32_to_cpu(lppaca_of(cpu).dispersion_count); |
| } |
| |
| seq_printf(m, "dispatches=%lu\n", dispatches); |
| seq_printf(m, "dispatch_dispersions=%lu\n", dispatch_dispersions); |
| } |
| |
| static void parse_em_data(struct seq_file *m) |
| { |
| unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; |
| |
| if (firmware_has_feature(FW_FEATURE_LPAR) && |
| plpar_hcall(H_GET_EM_PARMS, retbuf) == H_SUCCESS) |
| seq_printf(m, "power_mode_data=%016lx\n", retbuf[0]); |
| } |
| |
| static void maxmem_data(struct seq_file *m) |
| { |
| unsigned long maxmem = 0; |
| |
| maxmem += (unsigned long)drmem_info->n_lmbs * drmem_info->lmb_size; |
| maxmem += hugetlb_total_pages() * PAGE_SIZE; |
| |
| seq_printf(m, "MaxMem=%lu\n", maxmem); |
| } |
| |
| static int pseries_lparcfg_data(struct seq_file *m, void *v) |
| { |
| int partition_potential_processors; |
| int partition_active_processors; |
| struct device_node *rtas_node; |
| const __be32 *lrdrp = NULL; |
| |
| rtas_node = of_find_node_by_path("/rtas"); |
| if (rtas_node) |
| lrdrp = of_get_property(rtas_node, "ibm,lrdr-capacity", NULL); |
| |
| if (lrdrp == NULL) { |
| partition_potential_processors = vdso_data->processorCount; |
| } else { |
| partition_potential_processors = be32_to_cpup(lrdrp + 4); |
| } |
| of_node_put(rtas_node); |
| |
| partition_active_processors = lparcfg_count_active_processors(); |
| |
| if (firmware_has_feature(FW_FEATURE_SPLPAR)) { |
| /* this call handles the ibm,get-system-parameter contents */ |
| read_lpar_name(m); |
| parse_system_parameter_string(m); |
| parse_ppp_data(m); |
| parse_mpp_data(m); |
| parse_mpp_x_data(m); |
| pseries_cmo_data(m); |
| splpar_dispatch_data(m); |
| |
| seq_printf(m, "purr=%ld\n", get_purr()); |
| seq_printf(m, "tbr=%ld\n", mftb()); |
| } else { /* non SPLPAR case */ |
| |
| seq_printf(m, "system_active_processors=%d\n", |
| partition_potential_processors); |
| |
| seq_printf(m, "system_potential_processors=%d\n", |
| partition_potential_processors); |
| |
| seq_printf(m, "partition_max_entitled_capacity=%d\n", |
| partition_potential_processors * 100); |
| |
| seq_printf(m, "partition_entitled_capacity=%d\n", |
| partition_active_processors * 100); |
| } |
| |
| show_gpci_data(m); |
| |
| seq_printf(m, "partition_active_processors=%d\n", |
| partition_active_processors); |
| |
| seq_printf(m, "partition_potential_processors=%d\n", |
| partition_potential_processors); |
| |
| seq_printf(m, "shared_processor_mode=%d\n", |
| lppaca_shared_proc(get_lppaca())); |
| |
| #ifdef CONFIG_PPC_64S_HASH_MMU |
| if (!radix_enabled()) |
| seq_printf(m, "slb_size=%d\n", mmu_slb_size); |
| #endif |
| parse_em_data(m); |
| maxmem_data(m); |
| |
| seq_printf(m, "security_flavor=%u\n", pseries_security_flavor); |
| |
| return 0; |
| } |
| |
| static ssize_t update_ppp(u64 *entitlement, u8 *weight) |
| { |
| struct hvcall_ppp_data ppp_data; |
| u8 new_weight; |
| u64 new_entitled; |
| ssize_t retval; |
| |
| /* Get our current parameters */ |
| retval = h_get_ppp(&ppp_data); |
| if (retval) |
| return retval; |
| |
| if (entitlement) { |
| new_weight = ppp_data.weight; |
| new_entitled = *entitlement; |
| } else if (weight) { |
| new_weight = *weight; |
| new_entitled = ppp_data.entitlement; |
| } else |
| return -EINVAL; |
| |
| pr_debug("%s: current_entitled = %llu, current_weight = %u\n", |
| __func__, ppp_data.entitlement, ppp_data.weight); |
| |
| pr_debug("%s: new_entitled = %llu, new_weight = %u\n", |
| __func__, new_entitled, new_weight); |
| |
| retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight); |
| return retval; |
| } |
| |
| /** |
| * update_mpp |
| * |
| * Update the memory entitlement and weight for the partition. Caller must |
| * specify either a new entitlement or weight, not both, to be updated |
| * since the h_set_mpp call takes both entitlement and weight as parameters. |
| */ |
| static ssize_t update_mpp(u64 *entitlement, u8 *weight) |
| { |
| struct hvcall_mpp_data mpp_data; |
| u64 new_entitled; |
| u8 new_weight; |
| ssize_t rc; |
| |
| if (entitlement) { |
| /* Check with vio to ensure the new memory entitlement |
| * can be handled. |
| */ |
| rc = vio_cmo_entitlement_update(*entitlement); |
| if (rc) |
| return rc; |
| } |
| |
| rc = h_get_mpp(&mpp_data); |
| if (rc) |
| return rc; |
| |
| if (entitlement) { |
| new_weight = mpp_data.mem_weight; |
| new_entitled = *entitlement; |
| } else if (weight) { |
| new_weight = *weight; |
| new_entitled = mpp_data.entitled_mem; |
| } else |
| return -EINVAL; |
| |
| pr_debug("%s: current_entitled = %lu, current_weight = %u\n", |
| __func__, mpp_data.entitled_mem, mpp_data.mem_weight); |
| |
| pr_debug("%s: new_entitled = %llu, new_weight = %u\n", |
| __func__, new_entitled, new_weight); |
| |
| rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight); |
| return rc; |
| } |
| |
| /* |
| * Interface for changing system parameters (variable capacity weight |
| * and entitled capacity). Format of input is "param_name=value"; |
| * anything after value is ignored. Valid parameters at this time are |
| * "partition_entitled_capacity" and "capacity_weight". We use |
| * H_SET_PPP to alter parameters. |
| * |
| * This function should be invoked only on systems with |
| * FW_FEATURE_SPLPAR. |
| */ |
| static ssize_t lparcfg_write(struct file *file, const char __user * buf, |
| size_t count, loff_t * off) |
| { |
| char kbuf[64]; |
| char *tmp; |
| u64 new_entitled, *new_entitled_ptr = &new_entitled; |
| u8 new_weight, *new_weight_ptr = &new_weight; |
| ssize_t retval; |
| |
| if (!firmware_has_feature(FW_FEATURE_SPLPAR)) |
| return -EINVAL; |
| |
| if (count > sizeof(kbuf)) |
| return -EINVAL; |
| |
| if (copy_from_user(kbuf, buf, count)) |
| return -EFAULT; |
| |
| kbuf[count - 1] = '\0'; |
| tmp = strchr(kbuf, '='); |
| if (!tmp) |
| return -EINVAL; |
| |
| *tmp++ = '\0'; |
| |
| if (!strcmp(kbuf, "partition_entitled_capacity")) { |
| char *endp; |
| *new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10); |
| if (endp == tmp) |
| return -EINVAL; |
| |
| retval = update_ppp(new_entitled_ptr, NULL); |
| } else if (!strcmp(kbuf, "capacity_weight")) { |
| char *endp; |
| *new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10); |
| if (endp == tmp) |
| return -EINVAL; |
| |
| retval = update_ppp(NULL, new_weight_ptr); |
| } else if (!strcmp(kbuf, "entitled_memory")) { |
| char *endp; |
| *new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10); |
| if (endp == tmp) |
| return -EINVAL; |
| |
| retval = update_mpp(new_entitled_ptr, NULL); |
| } else if (!strcmp(kbuf, "entitled_memory_weight")) { |
| char *endp; |
| *new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10); |
| if (endp == tmp) |
| return -EINVAL; |
| |
| retval = update_mpp(NULL, new_weight_ptr); |
| } else |
| return -EINVAL; |
| |
| if (retval == H_SUCCESS || retval == H_CONSTRAINED) { |
| retval = count; |
| } else if (retval == H_BUSY) { |
| retval = -EBUSY; |
| } else if (retval == H_HARDWARE) { |
| retval = -EIO; |
| } else if (retval == H_PARAMETER) { |
| retval = -EINVAL; |
| } |
| |
| return retval; |
| } |
| |
| static int lparcfg_data(struct seq_file *m, void *v) |
| { |
| struct device_node *rootdn; |
| const char *model = ""; |
| const char *system_id = ""; |
| const char *tmp; |
| const __be32 *lp_index_ptr; |
| unsigned int lp_index = 0; |
| |
| seq_printf(m, "%s %s\n", MODULE_NAME, MODULE_VERS); |
| |
| rootdn = of_find_node_by_path("/"); |
| if (rootdn) { |
| tmp = of_get_property(rootdn, "model", NULL); |
| if (tmp) |
| model = tmp; |
| tmp = of_get_property(rootdn, "system-id", NULL); |
| if (tmp) |
| system_id = tmp; |
| lp_index_ptr = of_get_property(rootdn, "ibm,partition-no", |
| NULL); |
| if (lp_index_ptr) |
| lp_index = be32_to_cpup(lp_index_ptr); |
| of_node_put(rootdn); |
| } |
| seq_printf(m, "serial_number=%s\n", system_id); |
| seq_printf(m, "system_type=%s\n", model); |
| seq_printf(m, "partition_id=%d\n", (int)lp_index); |
| |
| return pseries_lparcfg_data(m, v); |
| } |
| |
| static int lparcfg_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, lparcfg_data, NULL); |
| } |
| |
| static const struct proc_ops lparcfg_proc_ops = { |
| .proc_read = seq_read, |
| .proc_write = lparcfg_write, |
| .proc_open = lparcfg_open, |
| .proc_release = single_release, |
| .proc_lseek = seq_lseek, |
| }; |
| |
| static int __init lparcfg_init(void) |
| { |
| umode_t mode = 0444; |
| |
| /* Allow writing if we have FW_FEATURE_SPLPAR */ |
| if (firmware_has_feature(FW_FEATURE_SPLPAR)) |
| mode |= 0200; |
| |
| if (!proc_create("powerpc/lparcfg", mode, NULL, &lparcfg_proc_ops)) { |
| printk(KERN_ERR "Failed to create powerpc/lparcfg\n"); |
| return -EIO; |
| } |
| return 0; |
| } |
| machine_device_initcall(pseries, lparcfg_init); |