| # SPDX-License-Identifier: GPL-2.0 |
| |
| menu "UML Character Devices" |
| |
| config STDERR_CONSOLE |
| bool "stderr console" |
| default y |
| help |
| console driver which dumps all printk messages to stderr. |
| |
| config SSL |
| bool "Virtual serial line" |
| help |
| The User-Mode Linux environment allows you to create virtual serial |
| lines on the UML that are usually made to show up on the host as |
| ttys or ptys. |
| |
| See <http://user-mode-linux.sourceforge.net/old/input.html> for more |
| information and command line examples of how to use this facility. |
| |
| Unless you have a specific reason for disabling this, say Y. |
| |
| config NULL_CHAN |
| bool "null channel support" |
| help |
| This option enables support for attaching UML consoles and serial |
| lines to a device similar to /dev/null. Data written to it disappears |
| and there is never any data to be read. |
| |
| config PORT_CHAN |
| bool "port channel support" |
| help |
| This option enables support for attaching UML consoles and serial |
| lines to host portals. They may be accessed with 'telnet <host> |
| <port number>'. Any number of consoles and serial lines may be |
| attached to a single portal, although what UML device you get when |
| you telnet to that portal will be unpredictable. |
| It is safe to say 'Y' here. |
| |
| config PTY_CHAN |
| bool "pty channel support" |
| help |
| This option enables support for attaching UML consoles and serial |
| lines to host pseudo-terminals. Access to both traditional |
| pseudo-terminals (/dev/pty*) and pts pseudo-terminals are controlled |
| with this option. The assignment of UML devices to host devices |
| will be announced in the kernel message log. |
| It is safe to say 'Y' here. |
| |
| config TTY_CHAN |
| bool "tty channel support" |
| help |
| This option enables support for attaching UML consoles and serial |
| lines to host terminals. Access to both virtual consoles |
| (/dev/tty*) and the slave side of pseudo-terminals (/dev/ttyp* and |
| /dev/pts/*) are controlled by this option. |
| It is safe to say 'Y' here. |
| |
| config XTERM_CHAN |
| bool "xterm channel support" |
| help |
| This option enables support for attaching UML consoles and serial |
| lines to xterms. Each UML device so assigned will be brought up in |
| its own xterm. |
| It is safe to say 'Y' here. |
| |
| config XTERM_CHAN_DEFAULT_EMULATOR |
| string "xterm channel default terminal emulator" |
| depends on XTERM_CHAN |
| default "xterm" |
| help |
| This option allows changing the default terminal emulator. |
| |
| config NOCONFIG_CHAN |
| bool |
| default !(XTERM_CHAN && TTY_CHAN && PTY_CHAN && PORT_CHAN && NULL_CHAN) |
| |
| config CON_ZERO_CHAN |
| string "Default main console channel initialization" |
| default "fd:0,fd:1" |
| help |
| This is the string describing the channel to which the main console |
| will be attached by default. This value can be overridden from the |
| command line. The default value is "fd:0,fd:1", which attaches the |
| main console to stdin and stdout. |
| It is safe to leave this unchanged. |
| |
| config CON_CHAN |
| string "Default console channel initialization" |
| default "xterm" |
| help |
| This is the string describing the channel to which all consoles |
| except the main console will be attached by default. This value can |
| be overridden from the command line. The default value is "xterm", |
| which brings them up in xterms. |
| It is safe to leave this unchanged, although you may wish to change |
| this if you expect the UML that you build to be run in environments |
| which don't have X or xterm available. |
| |
| config SSL_CHAN |
| string "Default serial line channel initialization" |
| default "pty" |
| help |
| This is the string describing the channel to which the serial lines |
| will be attached by default. This value can be overridden from the |
| command line. The default value is "pty", which attaches them to |
| traditional pseudo-terminals. |
| It is safe to leave this unchanged, although you may wish to change |
| this if you expect the UML that you build to be run in environments |
| which don't have a set of /dev/pty* devices. |
| |
| config UML_SOUND |
| tristate "Sound support" |
| help |
| This option enables UML sound support. If enabled, it will pull in |
| soundcore and the UML hostaudio relay, which acts as a intermediary |
| between the host's dsp and mixer devices and the UML sound system. |
| It is safe to say 'Y' here. |
| |
| config SOUND |
| tristate |
| default UML_SOUND |
| |
| config SOUND_OSS_CORE |
| bool |
| default UML_SOUND |
| |
| config HOSTAUDIO |
| tristate |
| default UML_SOUND |
| |
| endmenu |
| |
| menu "UML Network Devices" |
| depends on NET |
| |
| # UML virtual driver |
| config UML_NET |
| bool "Virtual network device" |
| help |
| While the User-Mode port cannot directly talk to any physical |
| hardware devices, this choice and the following transport options |
| provide one or more virtual network devices through which the UML |
| kernels can talk to each other, the host, and with the host's help, |
| machines on the outside world. |
| |
| For more information, including explanations of the networking and |
| sample configurations, see |
| <http://user-mode-linux.sourceforge.net/old/networking.html>. |
| |
| If you'd like to be able to enable networking in the User-Mode |
| linux environment, say Y; otherwise say N. Note that you must |
| enable at least one of the following transport options to actually |
| make use of UML networking. |
| |
| config UML_NET_ETHERTAP |
| bool "Ethertap transport (obsolete)" |
| depends on UML_NET |
| help |
| The Ethertap User-Mode Linux network transport allows a single |
| running UML to exchange packets with its host over one of the |
| host's Ethertap devices, such as /dev/tap0. Additional running |
| UMLs can use additional Ethertap devices, one per running UML. |
| While the UML believes it's on a (multi-device, broadcast) virtual |
| Ethernet network, it's in fact communicating over a point-to-point |
| link with the host. |
| |
| To use this, your host kernel must have support for Ethertap |
| devices. Also, if your host kernel is 2.4.x, it must have |
| CONFIG_NETLINK_DEV configured as Y or M. |
| |
| For more information, see |
| <http://user-mode-linux.sourceforge.net/old/networking.html> That site |
| has examples of the UML command line to use to enable Ethertap |
| networking. |
| |
| NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please |
| migrate to UML_NET_VECTOR. |
| |
| If unsure, say N. |
| |
| config UML_NET_TUNTAP |
| bool "TUN/TAP transport (obsolete)" |
| depends on UML_NET |
| help |
| The UML TUN/TAP network transport allows a UML instance to exchange |
| packets with the host over a TUN/TAP device. This option will only |
| work with a 2.4 host, unless you've applied the TUN/TAP patch to |
| your 2.2 host kernel. |
| |
| To use this transport, your host kernel must have support for TUN/TAP |
| devices, either built-in or as a module. |
| |
| NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please |
| migrate to UML_NET_VECTOR. |
| |
| If unsure, say N. |
| |
| config UML_NET_SLIP |
| bool "SLIP transport (obsolete)" |
| depends on UML_NET |
| help |
| The slip User-Mode Linux network transport allows a running UML to |
| network with its host over a point-to-point link. Unlike Ethertap, |
| which can carry any Ethernet frame (and hence even non-IP packets), |
| the slip transport can only carry IP packets. |
| |
| To use this, your host must support slip devices. |
| |
| For more information, see |
| <http://user-mode-linux.sourceforge.net/old/networking.html>. |
| has examples of the UML command line to use to enable slip |
| networking, and details of a few quirks with it. |
| |
| NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please |
| migrate to UML_NET_VECTOR. |
| |
| If unsure, say N. |
| |
| config UML_NET_DAEMON |
| bool "Daemon transport (obsolete)" |
| depends on UML_NET |
| help |
| This User-Mode Linux network transport allows one or more running |
| UMLs on a single host to communicate with each other, but not to |
| the host. |
| |
| To use this form of networking, you'll need to run the UML |
| networking daemon on the host. |
| |
| For more information, see |
| <http://user-mode-linux.sourceforge.net/old/networking.html> That site |
| has examples of the UML command line to use to enable Daemon |
| networking. |
| |
| NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please |
| migrate to UML_NET_VECTOR. |
| |
| If unsure, say N. |
| |
| config UML_NET_DAEMON_DEFAULT_SOCK |
| string "Default socket for daemon transport" |
| default "/tmp/uml.ctl" |
| depends on UML_NET_DAEMON |
| help |
| This option allows setting the default socket for the daemon |
| transport, normally it defaults to /tmp/uml.ctl. |
| |
| config UML_NET_VECTOR |
| bool "Vector I/O high performance network devices" |
| depends on UML_NET |
| select MAY_HAVE_RUNTIME_DEPS |
| help |
| This User-Mode Linux network driver uses multi-message send |
| and receive functions. The host running the UML guest must have |
| a linux kernel version above 3.0 and a libc version > 2.13. |
| This driver provides tap, raw, gre and l2tpv3 network transports |
| with up to 4 times higher network throughput than the UML network |
| drivers. |
| |
| config UML_NET_VDE |
| bool "VDE transport (obsolete)" |
| depends on UML_NET |
| select MAY_HAVE_RUNTIME_DEPS |
| help |
| This User-Mode Linux network transport allows one or more running |
| UMLs on a single host to communicate with each other and also |
| with the rest of the world using Virtual Distributed Ethernet, |
| an improved fork of uml_switch. |
| |
| You must have libvdeplug installed in order to build the vde |
| transport into UML. |
| |
| To use this form of networking, you will need to run vde_switch |
| on the host. |
| |
| For more information, see <http://wiki.virtualsquare.org/> |
| That site has a good overview of what VDE is and also examples |
| of the UML command line to use to enable VDE networking. |
| |
| NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please |
| migrate to UML_NET_VECTOR. |
| |
| If unsure, say N. |
| |
| config UML_NET_MCAST |
| bool "Multicast transport (obsolete)" |
| depends on UML_NET |
| help |
| This Multicast User-Mode Linux network transport allows multiple |
| UMLs (even ones running on different host machines!) to talk to |
| each other over a virtual ethernet network. However, it requires |
| at least one UML with one of the other transports to act as a |
| bridge if any of them need to be able to talk to their hosts or any |
| other IP machines. |
| |
| To use this, your host kernel(s) must support IP Multicasting. |
| |
| For more information, see |
| <http://user-mode-linux.sourceforge.net/old/networking.html> That site |
| has examples of the UML command line to use to enable Multicast |
| networking, and notes about the security of this approach. |
| |
| NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please |
| migrate to UML_NET_VECTOR. |
| |
| If unsure, say N. |
| |
| config UML_NET_PCAP |
| bool "pcap transport (obsolete)" |
| depends on UML_NET |
| select MAY_HAVE_RUNTIME_DEPS |
| help |
| The pcap transport makes a pcap packet stream on the host look |
| like an ethernet device inside UML. This is useful for making |
| UML act as a network monitor for the host. You must have libcap |
| installed in order to build the pcap transport into UML. |
| |
| For more information, see |
| <http://user-mode-linux.sourceforge.net/old/networking.html> That site |
| has examples of the UML command line to use to enable this option. |
| |
| NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please |
| migrate to UML_NET_VECTOR. |
| |
| If unsure, say N. |
| |
| config UML_NET_SLIRP |
| bool "SLiRP transport (obsolete)" |
| depends on UML_NET |
| help |
| The SLiRP User-Mode Linux network transport allows a running UML |
| to network by invoking a program that can handle SLIP encapsulated |
| packets. This is commonly (but not limited to) the application |
| known as SLiRP, a program that can re-socket IP packets back onto |
| he host on which it is run. Only IP packets are supported, |
| unlike other network transports that can handle all Ethernet |
| frames. In general, slirp allows the UML the same IP connectivity |
| to the outside world that the host user is permitted, and unlike |
| other transports, SLiRP works without the need of root level |
| privileges, setuid binaries, or SLIP devices on the host. This |
| also means not every type of connection is possible, but most |
| situations can be accommodated with carefully crafted slirp |
| commands that can be passed along as part of the network device's |
| setup string. The effect of this transport on the UML is similar |
| that of a host behind a firewall that masquerades all network |
| connections passing through it (but is less secure). |
| |
| NOTE: THIS TRANSPORT IS DEPRECATED AND WILL BE REMOVED SOON!!! Please |
| migrate to UML_NET_VECTOR. |
| |
| If unsure, say N. |
| |
| Startup example: "eth0=slirp,FE:FD:01:02:03:04,/usr/local/bin/slirp" |
| |
| endmenu |
| |
| config VIRTIO_UML |
| bool "UML driver for virtio devices" |
| select VIRTIO |
| help |
| This driver provides support for virtio based paravirtual device |
| drivers over vhost-user sockets. |
| |
| config UML_RTC |
| bool "UML RTC driver" |
| depends on RTC_CLASS |
| # there's no use in this if PM_SLEEP isn't enabled ... |
| depends on PM_SLEEP |
| help |
| When PM_SLEEP is configured, it may be desirable to wake up using |
| rtcwake, especially in time-travel mode. This driver enables that |
| by providing a fake RTC clock that causes a wakeup at the right |
| time. |
| |
| config UML_PCI_OVER_VIRTIO |
| bool "Enable PCI over VIRTIO device simulation" |
| # in theory, just VIRTIO is enough, but that causes recursion |
| depends on VIRTIO_UML |
| select FORCE_PCI |
| select UML_IOMEM_EMULATION |
| select UML_DMA_EMULATION |
| select PCI_MSI |
| select PCI_MSI_IRQ_DOMAIN |
| select PCI_LOCKLESS_CONFIG |
| |
| config UML_PCI_OVER_VIRTIO_DEVICE_ID |
| int "set the virtio device ID for PCI emulation" |
| default -1 |
| depends on UML_PCI_OVER_VIRTIO |
| help |
| There's no official device ID assigned (yet), set the one you |
| wish to use for experimentation here. The default of -1 is |
| not valid and will cause the driver to fail at probe. |
