| /* |
| * Implement fast SHA-1 with AVX2 instructions. (x86_64) |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2014 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * Contact Information: |
| * Ilya Albrekht <ilya.albrekht@intel.com> |
| * Maxim Locktyukhin <maxim.locktyukhin@intel.com> |
| * Ronen Zohar <ronen.zohar@intel.com> |
| * Chandramouli Narayanan <mouli@linux.intel.com> |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2014 Intel Corporation. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * Neither the name of Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| |
| /* |
| * SHA-1 implementation with Intel(R) AVX2 instruction set extensions. |
| * |
| *This implementation is based on the previous SSSE3 release: |
| *Visit http://software.intel.com/en-us/articles/ |
| *and refer to improving-the-performance-of-the-secure-hash-algorithm-1/ |
| * |
| *Updates 20-byte SHA-1 record at start of 'state', from 'input', for |
| *even number of 'blocks' consecutive 64-byte blocks. |
| * |
| *extern "C" void sha1_transform_avx2( |
| * struct sha1_state *state, const u8* input, int blocks ); |
| */ |
| |
| #include <linux/linkage.h> |
| |
| #define CTX %rdi /* arg1 */ |
| #define BUF %rsi /* arg2 */ |
| #define CNT %rdx /* arg3 */ |
| |
| #define REG_A %ecx |
| #define REG_B %esi |
| #define REG_C %edi |
| #define REG_D %eax |
| #define REG_E %edx |
| #define REG_TB %ebx |
| #define REG_TA %r12d |
| #define REG_RA %rcx |
| #define REG_RB %rsi |
| #define REG_RC %rdi |
| #define REG_RD %rax |
| #define REG_RE %rdx |
| #define REG_RTA %r12 |
| #define REG_RTB %rbx |
| #define REG_T1 %r11d |
| #define xmm_mov vmovups |
| #define avx2_zeroupper vzeroupper |
| #define RND_F1 1 |
| #define RND_F2 2 |
| #define RND_F3 3 |
| |
| .macro REGALLOC |
| .set A, REG_A |
| .set B, REG_B |
| .set C, REG_C |
| .set D, REG_D |
| .set E, REG_E |
| .set TB, REG_TB |
| .set TA, REG_TA |
| |
| .set RA, REG_RA |
| .set RB, REG_RB |
| .set RC, REG_RC |
| .set RD, REG_RD |
| .set RE, REG_RE |
| |
| .set RTA, REG_RTA |
| .set RTB, REG_RTB |
| |
| .set T1, REG_T1 |
| .endm |
| |
| #define HASH_PTR %r9 |
| #define BLOCKS_CTR %r8 |
| #define BUFFER_PTR %r10 |
| #define BUFFER_PTR2 %r13 |
| |
| #define PRECALC_BUF %r14 |
| #define WK_BUF %r15 |
| |
| #define W_TMP %xmm0 |
| #define WY_TMP %ymm0 |
| #define WY_TMP2 %ymm9 |
| |
| # AVX2 variables |
| #define WY0 %ymm3 |
| #define WY4 %ymm5 |
| #define WY08 %ymm7 |
| #define WY12 %ymm8 |
| #define WY16 %ymm12 |
| #define WY20 %ymm13 |
| #define WY24 %ymm14 |
| #define WY28 %ymm15 |
| |
| #define YMM_SHUFB_BSWAP %ymm10 |
| |
| /* |
| * Keep 2 iterations precalculated at a time: |
| * - 80 DWORDs per iteration * 2 |
| */ |
| #define W_SIZE (80*2*2 +16) |
| |
| #define WK(t) ((((t) % 80) / 4)*32 + ( (t) % 4)*4 + ((t)/80)*16 )(WK_BUF) |
| #define PRECALC_WK(t) ((t)*2*2)(PRECALC_BUF) |
| |
| |
| .macro UPDATE_HASH hash, val |
| add \hash, \val |
| mov \val, \hash |
| .endm |
| |
| .macro PRECALC_RESET_WY |
| .set WY_00, WY0 |
| .set WY_04, WY4 |
| .set WY_08, WY08 |
| .set WY_12, WY12 |
| .set WY_16, WY16 |
| .set WY_20, WY20 |
| .set WY_24, WY24 |
| .set WY_28, WY28 |
| .set WY_32, WY_00 |
| .endm |
| |
| .macro PRECALC_ROTATE_WY |
| /* Rotate macros */ |
| .set WY_32, WY_28 |
| .set WY_28, WY_24 |
| .set WY_24, WY_20 |
| .set WY_20, WY_16 |
| .set WY_16, WY_12 |
| .set WY_12, WY_08 |
| .set WY_08, WY_04 |
| .set WY_04, WY_00 |
| .set WY_00, WY_32 |
| |
| /* Define register aliases */ |
| .set WY, WY_00 |
| .set WY_minus_04, WY_04 |
| .set WY_minus_08, WY_08 |
| .set WY_minus_12, WY_12 |
| .set WY_minus_16, WY_16 |
| .set WY_minus_20, WY_20 |
| .set WY_minus_24, WY_24 |
| .set WY_minus_28, WY_28 |
| .set WY_minus_32, WY |
| .endm |
| |
| .macro PRECALC_00_15 |
| .if (i == 0) # Initialize and rotate registers |
| PRECALC_RESET_WY |
| PRECALC_ROTATE_WY |
| .endif |
| |
| /* message scheduling pre-compute for rounds 0-15 */ |
| .if ((i & 7) == 0) |
| /* |
| * blended AVX2 and ALU instruction scheduling |
| * 1 vector iteration per 8 rounds |
| */ |
| vmovdqu (i * 2)(BUFFER_PTR), W_TMP |
| .elseif ((i & 7) == 1) |
| vinsertf128 $1, ((i-1) * 2)(BUFFER_PTR2),\ |
| WY_TMP, WY_TMP |
| .elseif ((i & 7) == 2) |
| vpshufb YMM_SHUFB_BSWAP, WY_TMP, WY |
| .elseif ((i & 7) == 4) |
| vpaddd K_XMM + K_XMM_AR(%rip), WY, WY_TMP |
| .elseif ((i & 7) == 7) |
| vmovdqu WY_TMP, PRECALC_WK(i&~7) |
| |
| PRECALC_ROTATE_WY |
| .endif |
| .endm |
| |
| .macro PRECALC_16_31 |
| /* |
| * message scheduling pre-compute for rounds 16-31 |
| * calculating last 32 w[i] values in 8 XMM registers |
| * pre-calculate K+w[i] values and store to mem |
| * for later load by ALU add instruction |
| * |
| * "brute force" vectorization for rounds 16-31 only |
| * due to w[i]->w[i-3] dependency |
| */ |
| .if ((i & 7) == 0) |
| /* |
| * blended AVX2 and ALU instruction scheduling |
| * 1 vector iteration per 8 rounds |
| */ |
| /* w[i-14] */ |
| vpalignr $8, WY_minus_16, WY_minus_12, WY |
| vpsrldq $4, WY_minus_04, WY_TMP /* w[i-3] */ |
| .elseif ((i & 7) == 1) |
| vpxor WY_minus_08, WY, WY |
| vpxor WY_minus_16, WY_TMP, WY_TMP |
| .elseif ((i & 7) == 2) |
| vpxor WY_TMP, WY, WY |
| vpslldq $12, WY, WY_TMP2 |
| .elseif ((i & 7) == 3) |
| vpslld $1, WY, WY_TMP |
| vpsrld $31, WY, WY |
| .elseif ((i & 7) == 4) |
| vpor WY, WY_TMP, WY_TMP |
| vpslld $2, WY_TMP2, WY |
| .elseif ((i & 7) == 5) |
| vpsrld $30, WY_TMP2, WY_TMP2 |
| vpxor WY, WY_TMP, WY_TMP |
| .elseif ((i & 7) == 7) |
| vpxor WY_TMP2, WY_TMP, WY |
| vpaddd K_XMM + K_XMM_AR(%rip), WY, WY_TMP |
| vmovdqu WY_TMP, PRECALC_WK(i&~7) |
| |
| PRECALC_ROTATE_WY |
| .endif |
| .endm |
| |
| .macro PRECALC_32_79 |
| /* |
| * in SHA-1 specification: |
| * w[i] = (w[i-3] ^ w[i-8] ^ w[i-14] ^ w[i-16]) rol 1 |
| * instead we do equal: |
| * w[i] = (w[i-6] ^ w[i-16] ^ w[i-28] ^ w[i-32]) rol 2 |
| * allows more efficient vectorization |
| * since w[i]=>w[i-3] dependency is broken |
| */ |
| |
| .if ((i & 7) == 0) |
| /* |
| * blended AVX2 and ALU instruction scheduling |
| * 1 vector iteration per 8 rounds |
| */ |
| vpalignr $8, WY_minus_08, WY_minus_04, WY_TMP |
| .elseif ((i & 7) == 1) |
| /* W is W_minus_32 before xor */ |
| vpxor WY_minus_28, WY, WY |
| .elseif ((i & 7) == 2) |
| vpxor WY_minus_16, WY_TMP, WY_TMP |
| .elseif ((i & 7) == 3) |
| vpxor WY_TMP, WY, WY |
| .elseif ((i & 7) == 4) |
| vpslld $2, WY, WY_TMP |
| .elseif ((i & 7) == 5) |
| vpsrld $30, WY, WY |
| vpor WY, WY_TMP, WY |
| .elseif ((i & 7) == 7) |
| vpaddd K_XMM + K_XMM_AR(%rip), WY, WY_TMP |
| vmovdqu WY_TMP, PRECALC_WK(i&~7) |
| |
| PRECALC_ROTATE_WY |
| .endif |
| .endm |
| |
| .macro PRECALC r, s |
| .set i, \r |
| |
| .if (i < 40) |
| .set K_XMM, 32*0 |
| .elseif (i < 80) |
| .set K_XMM, 32*1 |
| .elseif (i < 120) |
| .set K_XMM, 32*2 |
| .else |
| .set K_XMM, 32*3 |
| .endif |
| |
| .if (i<32) |
| PRECALC_00_15 \s |
| .elseif (i<64) |
| PRECALC_16_31 \s |
| .elseif (i < 160) |
| PRECALC_32_79 \s |
| .endif |
| .endm |
| |
| .macro ROTATE_STATE |
| .set T_REG, E |
| .set E, D |
| .set D, C |
| .set C, B |
| .set B, TB |
| .set TB, A |
| .set A, T_REG |
| |
| .set T_REG, RE |
| .set RE, RD |
| .set RD, RC |
| .set RC, RB |
| .set RB, RTB |
| .set RTB, RA |
| .set RA, T_REG |
| .endm |
| |
| /* Macro relies on saved ROUND_Fx */ |
| |
| .macro RND_FUN f, r |
| .if (\f == RND_F1) |
| ROUND_F1 \r |
| .elseif (\f == RND_F2) |
| ROUND_F2 \r |
| .elseif (\f == RND_F3) |
| ROUND_F3 \r |
| .endif |
| .endm |
| |
| .macro RR r |
| .set round_id, (\r % 80) |
| |
| .if (round_id == 0) /* Precalculate F for first round */ |
| .set ROUND_FUNC, RND_F1 |
| mov B, TB |
| |
| rorx $(32-30), B, B /* b>>>2 */ |
| andn D, TB, T1 |
| and C, TB |
| xor T1, TB |
| .endif |
| |
| RND_FUN ROUND_FUNC, \r |
| ROTATE_STATE |
| |
| .if (round_id == 18) |
| .set ROUND_FUNC, RND_F2 |
| .elseif (round_id == 38) |
| .set ROUND_FUNC, RND_F3 |
| .elseif (round_id == 58) |
| .set ROUND_FUNC, RND_F2 |
| .endif |
| |
| .set round_id, ( (\r+1) % 80) |
| |
| RND_FUN ROUND_FUNC, (\r+1) |
| ROTATE_STATE |
| .endm |
| |
| .macro ROUND_F1 r |
| add WK(\r), E |
| |
| andn C, A, T1 /* ~b&d */ |
| lea (RE,RTB), E /* Add F from the previous round */ |
| |
| rorx $(32-5), A, TA /* T2 = A >>> 5 */ |
| rorx $(32-30),A, TB /* b>>>2 for next round */ |
| |
| PRECALC (\r) /* msg scheduling for next 2 blocks */ |
| |
| /* |
| * Calculate F for the next round |
| * (b & c) ^ andn[b, d] |
| */ |
| and B, A /* b&c */ |
| xor T1, A /* F1 = (b&c) ^ (~b&d) */ |
| |
| lea (RE,RTA), E /* E += A >>> 5 */ |
| .endm |
| |
| .macro ROUND_F2 r |
| add WK(\r), E |
| lea (RE,RTB), E /* Add F from the previous round */ |
| |
| /* Calculate F for the next round */ |
| rorx $(32-5), A, TA /* T2 = A >>> 5 */ |
| .if ((round_id) < 79) |
| rorx $(32-30), A, TB /* b>>>2 for next round */ |
| .endif |
| PRECALC (\r) /* msg scheduling for next 2 blocks */ |
| |
| .if ((round_id) < 79) |
| xor B, A |
| .endif |
| |
| add TA, E /* E += A >>> 5 */ |
| |
| .if ((round_id) < 79) |
| xor C, A |
| .endif |
| .endm |
| |
| .macro ROUND_F3 r |
| add WK(\r), E |
| PRECALC (\r) /* msg scheduling for next 2 blocks */ |
| |
| lea (RE,RTB), E /* Add F from the previous round */ |
| |
| mov B, T1 |
| or A, T1 |
| |
| rorx $(32-5), A, TA /* T2 = A >>> 5 */ |
| rorx $(32-30), A, TB /* b>>>2 for next round */ |
| |
| /* Calculate F for the next round |
| * (b and c) or (d and (b or c)) |
| */ |
| and C, T1 |
| and B, A |
| or T1, A |
| |
| add TA, E /* E += A >>> 5 */ |
| |
| .endm |
| |
| /* Add constant only if (%2 > %3) condition met (uses RTA as temp) |
| * %1 + %2 >= %3 ? %4 : 0 |
| */ |
| .macro ADD_IF_GE a, b, c, d |
| mov \a, RTA |
| add $\d, RTA |
| cmp $\c, \b |
| cmovge RTA, \a |
| .endm |
| |
| /* |
| * macro implements 80 rounds of SHA-1, for multiple blocks with s/w pipelining |
| */ |
| .macro SHA1_PIPELINED_MAIN_BODY |
| |
| REGALLOC |
| |
| mov (HASH_PTR), A |
| mov 4(HASH_PTR), B |
| mov 8(HASH_PTR), C |
| mov 12(HASH_PTR), D |
| mov 16(HASH_PTR), E |
| |
| mov %rsp, PRECALC_BUF |
| lea (2*4*80+32)(%rsp), WK_BUF |
| |
| # Precalc WK for first 2 blocks |
| ADD_IF_GE BUFFER_PTR2, BLOCKS_CTR, 2, 64 |
| .set i, 0 |
| .rept 160 |
| PRECALC i |
| .set i, i + 1 |
| .endr |
| |
| /* Go to next block if needed */ |
| ADD_IF_GE BUFFER_PTR, BLOCKS_CTR, 3, 128 |
| ADD_IF_GE BUFFER_PTR2, BLOCKS_CTR, 4, 128 |
| xchg WK_BUF, PRECALC_BUF |
| |
| .align 32 |
| _loop: |
| /* |
| * code loops through more than one block |
| * we use K_BASE value as a signal of a last block, |
| * it is set below by: cmovae BUFFER_PTR, K_BASE |
| */ |
| test BLOCKS_CTR, BLOCKS_CTR |
| jnz _begin |
| .align 32 |
| jmp _end |
| .align 32 |
| _begin: |
| |
| /* |
| * Do first block |
| * rounds: 0,2,4,6,8 |
| */ |
| .set j, 0 |
| .rept 5 |
| RR j |
| .set j, j+2 |
| .endr |
| |
| jmp _loop0 |
| _loop0: |
| |
| /* |
| * rounds: |
| * 10,12,14,16,18 |
| * 20,22,24,26,28 |
| * 30,32,34,36,38 |
| * 40,42,44,46,48 |
| * 50,52,54,56,58 |
| */ |
| .rept 25 |
| RR j |
| .set j, j+2 |
| .endr |
| |
| /* Update Counter */ |
| sub $1, BLOCKS_CTR |
| /* Move to the next block only if needed*/ |
| ADD_IF_GE BUFFER_PTR, BLOCKS_CTR, 4, 128 |
| /* |
| * rounds |
| * 60,62,64,66,68 |
| * 70,72,74,76,78 |
| */ |
| .rept 10 |
| RR j |
| .set j, j+2 |
| .endr |
| |
| UPDATE_HASH (HASH_PTR), A |
| UPDATE_HASH 4(HASH_PTR), TB |
| UPDATE_HASH 8(HASH_PTR), C |
| UPDATE_HASH 12(HASH_PTR), D |
| UPDATE_HASH 16(HASH_PTR), E |
| |
| test BLOCKS_CTR, BLOCKS_CTR |
| jz _loop |
| |
| mov TB, B |
| |
| /* Process second block */ |
| /* |
| * rounds |
| * 0+80, 2+80, 4+80, 6+80, 8+80 |
| * 10+80,12+80,14+80,16+80,18+80 |
| */ |
| |
| .set j, 0 |
| .rept 10 |
| RR j+80 |
| .set j, j+2 |
| .endr |
| |
| jmp _loop1 |
| _loop1: |
| /* |
| * rounds |
| * 20+80,22+80,24+80,26+80,28+80 |
| * 30+80,32+80,34+80,36+80,38+80 |
| */ |
| .rept 10 |
| RR j+80 |
| .set j, j+2 |
| .endr |
| |
| jmp _loop2 |
| _loop2: |
| |
| /* |
| * rounds |
| * 40+80,42+80,44+80,46+80,48+80 |
| * 50+80,52+80,54+80,56+80,58+80 |
| */ |
| .rept 10 |
| RR j+80 |
| .set j, j+2 |
| .endr |
| |
| /* update counter */ |
| sub $1, BLOCKS_CTR |
| /* Move to the next block only if needed*/ |
| ADD_IF_GE BUFFER_PTR2, BLOCKS_CTR, 4, 128 |
| |
| jmp _loop3 |
| _loop3: |
| |
| /* |
| * rounds |
| * 60+80,62+80,64+80,66+80,68+80 |
| * 70+80,72+80,74+80,76+80,78+80 |
| */ |
| .rept 10 |
| RR j+80 |
| .set j, j+2 |
| .endr |
| |
| UPDATE_HASH (HASH_PTR), A |
| UPDATE_HASH 4(HASH_PTR), TB |
| UPDATE_HASH 8(HASH_PTR), C |
| UPDATE_HASH 12(HASH_PTR), D |
| UPDATE_HASH 16(HASH_PTR), E |
| |
| /* Reset state for AVX2 reg permutation */ |
| mov A, TA |
| mov TB, A |
| mov C, TB |
| mov E, C |
| mov D, B |
| mov TA, D |
| |
| REGALLOC |
| |
| xchg WK_BUF, PRECALC_BUF |
| |
| jmp _loop |
| |
| .align 32 |
| _end: |
| |
| .endm |
| /* |
| * macro implements SHA-1 function's body for several 64-byte blocks |
| * param: function's name |
| */ |
| .macro SHA1_VECTOR_ASM name |
| SYM_FUNC_START(\name) |
| |
| push %rbx |
| push %r12 |
| push %r13 |
| push %r14 |
| push %r15 |
| |
| RESERVE_STACK = (W_SIZE*4 + 8+24) |
| |
| /* Align stack */ |
| push %rbp |
| mov %rsp, %rbp |
| and $~(0x20-1), %rsp |
| sub $RESERVE_STACK, %rsp |
| |
| avx2_zeroupper |
| |
| /* Setup initial values */ |
| mov CTX, HASH_PTR |
| mov BUF, BUFFER_PTR |
| |
| mov BUF, BUFFER_PTR2 |
| mov CNT, BLOCKS_CTR |
| |
| xmm_mov BSWAP_SHUFB_CTL(%rip), YMM_SHUFB_BSWAP |
| |
| SHA1_PIPELINED_MAIN_BODY |
| |
| avx2_zeroupper |
| |
| mov %rbp, %rsp |
| pop %rbp |
| |
| pop %r15 |
| pop %r14 |
| pop %r13 |
| pop %r12 |
| pop %rbx |
| |
| RET |
| |
| SYM_FUNC_END(\name) |
| .endm |
| |
| .section .rodata |
| |
| #define K1 0x5a827999 |
| #define K2 0x6ed9eba1 |
| #define K3 0x8f1bbcdc |
| #define K4 0xca62c1d6 |
| |
| .align 128 |
| K_XMM_AR: |
| .long K1, K1, K1, K1 |
| .long K1, K1, K1, K1 |
| .long K2, K2, K2, K2 |
| .long K2, K2, K2, K2 |
| .long K3, K3, K3, K3 |
| .long K3, K3, K3, K3 |
| .long K4, K4, K4, K4 |
| .long K4, K4, K4, K4 |
| |
| BSWAP_SHUFB_CTL: |
| .long 0x00010203 |
| .long 0x04050607 |
| .long 0x08090a0b |
| .long 0x0c0d0e0f |
| .long 0x00010203 |
| .long 0x04050607 |
| .long 0x08090a0b |
| .long 0x0c0d0e0f |
| .text |
| |
| SHA1_VECTOR_ASM sha1_transform_avx2 |