| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * linux/drivers/input/serio/ambakmi.c |
| * |
| * Copyright (C) 2000-2003 Deep Blue Solutions Ltd. |
| * Copyright (C) 2002 Russell King. |
| */ |
| #include <linux/module.h> |
| #include <linux/serio.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/ioport.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/amba/bus.h> |
| #include <linux/amba/kmi.h> |
| #include <linux/clk.h> |
| |
| #include <asm/io.h> |
| #include <asm/irq.h> |
| |
| #define KMI_BASE (kmi->base) |
| |
| struct amba_kmi_port { |
| struct serio *io; |
| struct clk *clk; |
| void __iomem *base; |
| unsigned int irq; |
| unsigned int divisor; |
| unsigned int open; |
| }; |
| |
| static irqreturn_t amba_kmi_int(int irq, void *dev_id) |
| { |
| struct amba_kmi_port *kmi = dev_id; |
| unsigned int status = readb(KMIIR); |
| int handled = IRQ_NONE; |
| |
| while (status & KMIIR_RXINTR) { |
| serio_interrupt(kmi->io, readb(KMIDATA), 0); |
| status = readb(KMIIR); |
| handled = IRQ_HANDLED; |
| } |
| |
| return handled; |
| } |
| |
| static int amba_kmi_write(struct serio *io, unsigned char val) |
| { |
| struct amba_kmi_port *kmi = io->port_data; |
| unsigned int timeleft = 10000; /* timeout in 100ms */ |
| |
| while ((readb(KMISTAT) & KMISTAT_TXEMPTY) == 0 && --timeleft) |
| udelay(10); |
| |
| if (timeleft) |
| writeb(val, KMIDATA); |
| |
| return timeleft ? 0 : SERIO_TIMEOUT; |
| } |
| |
| static int amba_kmi_open(struct serio *io) |
| { |
| struct amba_kmi_port *kmi = io->port_data; |
| unsigned int divisor; |
| int ret; |
| |
| ret = clk_prepare_enable(kmi->clk); |
| if (ret) |
| goto out; |
| |
| divisor = clk_get_rate(kmi->clk) / 8000000 - 1; |
| writeb(divisor, KMICLKDIV); |
| writeb(KMICR_EN, KMICR); |
| |
| ret = request_irq(kmi->irq, amba_kmi_int, IRQF_SHARED, "kmi-pl050", |
| kmi); |
| if (ret) { |
| printk(KERN_ERR "kmi: failed to claim IRQ%d\n", kmi->irq); |
| writeb(0, KMICR); |
| goto clk_disable; |
| } |
| |
| writeb(KMICR_EN | KMICR_RXINTREN, KMICR); |
| |
| return 0; |
| |
| clk_disable: |
| clk_disable_unprepare(kmi->clk); |
| out: |
| return ret; |
| } |
| |
| static void amba_kmi_close(struct serio *io) |
| { |
| struct amba_kmi_port *kmi = io->port_data; |
| |
| writeb(0, KMICR); |
| |
| free_irq(kmi->irq, kmi); |
| clk_disable_unprepare(kmi->clk); |
| } |
| |
| static int amba_kmi_probe(struct amba_device *dev, |
| const struct amba_id *id) |
| { |
| struct amba_kmi_port *kmi; |
| struct serio *io; |
| int ret; |
| |
| ret = amba_request_regions(dev, NULL); |
| if (ret) |
| return ret; |
| |
| kmi = kzalloc(sizeof(struct amba_kmi_port), GFP_KERNEL); |
| io = kzalloc(sizeof(struct serio), GFP_KERNEL); |
| if (!kmi || !io) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| |
| io->id.type = SERIO_8042; |
| io->write = amba_kmi_write; |
| io->open = amba_kmi_open; |
| io->close = amba_kmi_close; |
| strscpy(io->name, dev_name(&dev->dev), sizeof(io->name)); |
| strscpy(io->phys, dev_name(&dev->dev), sizeof(io->phys)); |
| io->port_data = kmi; |
| io->dev.parent = &dev->dev; |
| |
| kmi->io = io; |
| kmi->base = ioremap(dev->res.start, resource_size(&dev->res)); |
| if (!kmi->base) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| kmi->clk = clk_get(&dev->dev, "KMIREFCLK"); |
| if (IS_ERR(kmi->clk)) { |
| ret = PTR_ERR(kmi->clk); |
| goto unmap; |
| } |
| |
| kmi->irq = dev->irq[0]; |
| amba_set_drvdata(dev, kmi); |
| |
| serio_register_port(kmi->io); |
| return 0; |
| |
| unmap: |
| iounmap(kmi->base); |
| out: |
| kfree(kmi); |
| kfree(io); |
| amba_release_regions(dev); |
| return ret; |
| } |
| |
| static void amba_kmi_remove(struct amba_device *dev) |
| { |
| struct amba_kmi_port *kmi = amba_get_drvdata(dev); |
| |
| serio_unregister_port(kmi->io); |
| clk_put(kmi->clk); |
| iounmap(kmi->base); |
| kfree(kmi); |
| amba_release_regions(dev); |
| } |
| |
| static int __maybe_unused amba_kmi_resume(struct device *dev) |
| { |
| struct amba_kmi_port *kmi = dev_get_drvdata(dev); |
| |
| /* kick the serio layer to rescan this port */ |
| serio_reconnect(kmi->io); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(amba_kmi_dev_pm_ops, NULL, amba_kmi_resume); |
| |
| static const struct amba_id amba_kmi_idtable[] = { |
| { |
| .id = 0x00041050, |
| .mask = 0x000fffff, |
| }, |
| { 0, 0 } |
| }; |
| |
| MODULE_DEVICE_TABLE(amba, amba_kmi_idtable); |
| |
| static struct amba_driver ambakmi_driver = { |
| .drv = { |
| .name = "kmi-pl050", |
| .owner = THIS_MODULE, |
| .pm = &amba_kmi_dev_pm_ops, |
| }, |
| .id_table = amba_kmi_idtable, |
| .probe = amba_kmi_probe, |
| .remove = amba_kmi_remove, |
| }; |
| |
| module_amba_driver(ambakmi_driver); |
| |
| MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); |
| MODULE_DESCRIPTION("AMBA KMI controller driver"); |
| MODULE_LICENSE("GPL"); |