| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Arizona-i2c.c -- Arizona I2C bus interface |
| * |
| * Copyright 2012 Wolfson Microelectronics plc |
| * |
| * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| |
| #include <linux/mfd/arizona/core.h> |
| |
| #include "arizona.h" |
| |
| static int arizona_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| const void *match_data; |
| struct arizona *arizona; |
| const struct regmap_config *regmap_config = NULL; |
| unsigned long type = 0; |
| int ret; |
| |
| match_data = device_get_match_data(&i2c->dev); |
| if (match_data) |
| type = (unsigned long)match_data; |
| else if (id) |
| type = id->driver_data; |
| |
| switch (type) { |
| case WM5102: |
| if (IS_ENABLED(CONFIG_MFD_WM5102)) |
| regmap_config = &wm5102_i2c_regmap; |
| break; |
| case WM5110: |
| case WM8280: |
| if (IS_ENABLED(CONFIG_MFD_WM5110)) |
| regmap_config = &wm5110_i2c_regmap; |
| break; |
| case WM8997: |
| if (IS_ENABLED(CONFIG_MFD_WM8997)) |
| regmap_config = &wm8997_i2c_regmap; |
| break; |
| case WM8998: |
| case WM1814: |
| if (IS_ENABLED(CONFIG_MFD_WM8998)) |
| regmap_config = &wm8998_i2c_regmap; |
| break; |
| default: |
| dev_err(&i2c->dev, "Unknown device type %ld\n", type); |
| return -EINVAL; |
| } |
| |
| if (!regmap_config) { |
| dev_err(&i2c->dev, |
| "No kernel support for device type %ld\n", type); |
| return -EINVAL; |
| } |
| |
| arizona = devm_kzalloc(&i2c->dev, sizeof(*arizona), GFP_KERNEL); |
| if (arizona == NULL) |
| return -ENOMEM; |
| |
| arizona->regmap = devm_regmap_init_i2c(i2c, regmap_config); |
| if (IS_ERR(arizona->regmap)) { |
| ret = PTR_ERR(arizona->regmap); |
| dev_err(&i2c->dev, "Failed to allocate register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| arizona->type = type; |
| arizona->dev = &i2c->dev; |
| arizona->irq = i2c->irq; |
| |
| return arizona_dev_init(arizona); |
| } |
| |
| static void arizona_i2c_remove(struct i2c_client *i2c) |
| { |
| struct arizona *arizona = dev_get_drvdata(&i2c->dev); |
| |
| arizona_dev_exit(arizona); |
| } |
| |
| static const struct i2c_device_id arizona_i2c_id[] = { |
| { "wm5102", WM5102 }, |
| { "wm5110", WM5110 }, |
| { "wm8280", WM8280 }, |
| { "wm8997", WM8997 }, |
| { "wm8998", WM8998 }, |
| { "wm1814", WM1814 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, arizona_i2c_id); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id arizona_i2c_of_match[] = { |
| { .compatible = "wlf,wm5102", .data = (void *)WM5102 }, |
| { .compatible = "wlf,wm5110", .data = (void *)WM5110 }, |
| { .compatible = "wlf,wm8280", .data = (void *)WM8280 }, |
| { .compatible = "wlf,wm8997", .data = (void *)WM8997 }, |
| { .compatible = "wlf,wm8998", .data = (void *)WM8998 }, |
| { .compatible = "wlf,wm1814", .data = (void *)WM1814 }, |
| {}, |
| }; |
| #endif |
| |
| static struct i2c_driver arizona_i2c_driver = { |
| .driver = { |
| .name = "arizona", |
| .pm = &arizona_pm_ops, |
| .of_match_table = of_match_ptr(arizona_i2c_of_match), |
| }, |
| .probe = arizona_i2c_probe, |
| .remove = arizona_i2c_remove, |
| .id_table = arizona_i2c_id, |
| }; |
| |
| module_i2c_driver(arizona_i2c_driver); |
| |
| MODULE_SOFTDEP("pre: arizona_ldo1"); |
| MODULE_DESCRIPTION("Arizona I2C bus interface"); |
| MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); |
| MODULE_LICENSE("GPL"); |