| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * DA9150 Core MFD Driver |
| * |
| * Copyright (c) 2014 Dialog Semiconductor |
| * |
| * Author: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/da9150/core.h> |
| #include <linux/mfd/da9150/registers.h> |
| |
| /* Raw device access, used for QIF */ |
| static int da9150_i2c_read_device(struct i2c_client *client, u8 addr, int count, |
| u8 *buf) |
| { |
| struct i2c_msg xfer; |
| int ret; |
| |
| /* |
| * Read is split into two transfers as device expects STOP/START rather |
| * than repeated start to carry out this kind of access. |
| */ |
| |
| /* Write address */ |
| xfer.addr = client->addr; |
| xfer.flags = 0; |
| xfer.len = 1; |
| xfer.buf = &addr; |
| |
| ret = i2c_transfer(client->adapter, &xfer, 1); |
| if (ret != 1) { |
| if (ret < 0) |
| return ret; |
| else |
| return -EIO; |
| } |
| |
| /* Read data */ |
| xfer.addr = client->addr; |
| xfer.flags = I2C_M_RD; |
| xfer.len = count; |
| xfer.buf = buf; |
| |
| ret = i2c_transfer(client->adapter, &xfer, 1); |
| if (ret == 1) |
| return 0; |
| else if (ret < 0) |
| return ret; |
| else |
| return -EIO; |
| } |
| |
| static int da9150_i2c_write_device(struct i2c_client *client, u8 addr, |
| int count, const u8 *buf) |
| { |
| struct i2c_msg xfer; |
| u8 *reg_data; |
| int ret; |
| |
| reg_data = kzalloc(1 + count, GFP_KERNEL); |
| if (!reg_data) |
| return -ENOMEM; |
| |
| reg_data[0] = addr; |
| memcpy(®_data[1], buf, count); |
| |
| /* Write address & data */ |
| xfer.addr = client->addr; |
| xfer.flags = 0; |
| xfer.len = 1 + count; |
| xfer.buf = reg_data; |
| |
| ret = i2c_transfer(client->adapter, &xfer, 1); |
| kfree(reg_data); |
| if (ret == 1) |
| return 0; |
| else if (ret < 0) |
| return ret; |
| else |
| return -EIO; |
| } |
| |
| static bool da9150_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case DA9150_PAGE_CON: |
| case DA9150_STATUS_A: |
| case DA9150_STATUS_B: |
| case DA9150_STATUS_C: |
| case DA9150_STATUS_D: |
| case DA9150_STATUS_E: |
| case DA9150_STATUS_F: |
| case DA9150_STATUS_G: |
| case DA9150_STATUS_H: |
| case DA9150_STATUS_I: |
| case DA9150_STATUS_J: |
| case DA9150_STATUS_K: |
| case DA9150_STATUS_L: |
| case DA9150_STATUS_N: |
| case DA9150_FAULT_LOG_A: |
| case DA9150_FAULT_LOG_B: |
| case DA9150_EVENT_E: |
| case DA9150_EVENT_F: |
| case DA9150_EVENT_G: |
| case DA9150_EVENT_H: |
| case DA9150_CONTROL_B: |
| case DA9150_CONTROL_C: |
| case DA9150_GPADC_MAN: |
| case DA9150_GPADC_RES_A: |
| case DA9150_GPADC_RES_B: |
| case DA9150_ADETVB_CFG_C: |
| case DA9150_ADETD_STAT: |
| case DA9150_ADET_CMPSTAT: |
| case DA9150_ADET_CTRL_A: |
| case DA9150_PPR_TCTR_B: |
| case DA9150_COREBTLD_STAT_A: |
| case DA9150_CORE_DATA_A: |
| case DA9150_CORE_DATA_B: |
| case DA9150_CORE_DATA_C: |
| case DA9150_CORE_DATA_D: |
| case DA9150_CORE2WIRE_STAT_A: |
| case DA9150_FW_CTRL_C: |
| case DA9150_FG_CTRL_B: |
| case DA9150_FW_CTRL_B: |
| case DA9150_GPADC_CMAN: |
| case DA9150_GPADC_CRES_A: |
| case DA9150_GPADC_CRES_B: |
| case DA9150_CC_ICHG_RES_A: |
| case DA9150_CC_ICHG_RES_B: |
| case DA9150_CC_IAVG_RES_A: |
| case DA9150_CC_IAVG_RES_B: |
| case DA9150_TAUX_CTRL_A: |
| case DA9150_TAUX_VALUE_H: |
| case DA9150_TAUX_VALUE_L: |
| case DA9150_TBAT_RES_A: |
| case DA9150_TBAT_RES_B: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_range_cfg da9150_range_cfg[] = { |
| { |
| .range_min = DA9150_PAGE_CON, |
| .range_max = DA9150_TBAT_RES_B, |
| .selector_reg = DA9150_PAGE_CON, |
| .selector_mask = DA9150_I2C_PAGE_MASK, |
| .selector_shift = DA9150_I2C_PAGE_SHIFT, |
| .window_start = 0, |
| .window_len = 256, |
| }, |
| }; |
| |
| static const struct regmap_config da9150_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .ranges = da9150_range_cfg, |
| .num_ranges = ARRAY_SIZE(da9150_range_cfg), |
| .max_register = DA9150_TBAT_RES_B, |
| |
| .cache_type = REGCACHE_RBTREE, |
| |
| .volatile_reg = da9150_volatile_reg, |
| }; |
| |
| void da9150_read_qif(struct da9150 *da9150, u8 addr, int count, u8 *buf) |
| { |
| int ret; |
| |
| ret = da9150_i2c_read_device(da9150->core_qif, addr, count, buf); |
| if (ret < 0) |
| dev_err(da9150->dev, "Failed to read from QIF 0x%x: %d\n", |
| addr, ret); |
| } |
| EXPORT_SYMBOL_GPL(da9150_read_qif); |
| |
| void da9150_write_qif(struct da9150 *da9150, u8 addr, int count, const u8 *buf) |
| { |
| int ret; |
| |
| ret = da9150_i2c_write_device(da9150->core_qif, addr, count, buf); |
| if (ret < 0) |
| dev_err(da9150->dev, "Failed to write to QIF 0x%x: %d\n", |
| addr, ret); |
| } |
| EXPORT_SYMBOL_GPL(da9150_write_qif); |
| |
| u8 da9150_reg_read(struct da9150 *da9150, u16 reg) |
| { |
| int val, ret; |
| |
| ret = regmap_read(da9150->regmap, reg, &val); |
| if (ret) |
| dev_err(da9150->dev, "Failed to read from reg 0x%x: %d\n", |
| reg, ret); |
| |
| return (u8) val; |
| } |
| EXPORT_SYMBOL_GPL(da9150_reg_read); |
| |
| void da9150_reg_write(struct da9150 *da9150, u16 reg, u8 val) |
| { |
| int ret; |
| |
| ret = regmap_write(da9150->regmap, reg, val); |
| if (ret) |
| dev_err(da9150->dev, "Failed to write to reg 0x%x: %d\n", |
| reg, ret); |
| } |
| EXPORT_SYMBOL_GPL(da9150_reg_write); |
| |
| void da9150_set_bits(struct da9150 *da9150, u16 reg, u8 mask, u8 val) |
| { |
| int ret; |
| |
| ret = regmap_update_bits(da9150->regmap, reg, mask, val); |
| if (ret) |
| dev_err(da9150->dev, "Failed to set bits in reg 0x%x: %d\n", |
| reg, ret); |
| } |
| EXPORT_SYMBOL_GPL(da9150_set_bits); |
| |
| void da9150_bulk_read(struct da9150 *da9150, u16 reg, int count, u8 *buf) |
| { |
| int ret; |
| |
| ret = regmap_bulk_read(da9150->regmap, reg, buf, count); |
| if (ret) |
| dev_err(da9150->dev, "Failed to bulk read from reg 0x%x: %d\n", |
| reg, ret); |
| } |
| EXPORT_SYMBOL_GPL(da9150_bulk_read); |
| |
| void da9150_bulk_write(struct da9150 *da9150, u16 reg, int count, const u8 *buf) |
| { |
| int ret; |
| |
| ret = regmap_raw_write(da9150->regmap, reg, buf, count); |
| if (ret) |
| dev_err(da9150->dev, "Failed to bulk write to reg 0x%x %d\n", |
| reg, ret); |
| } |
| EXPORT_SYMBOL_GPL(da9150_bulk_write); |
| |
| static const struct regmap_irq da9150_irqs[] = { |
| [DA9150_IRQ_VBUS] = { |
| .reg_offset = 0, |
| .mask = DA9150_E_VBUS_MASK, |
| }, |
| [DA9150_IRQ_CHG] = { |
| .reg_offset = 0, |
| .mask = DA9150_E_CHG_MASK, |
| }, |
| [DA9150_IRQ_TCLASS] = { |
| .reg_offset = 0, |
| .mask = DA9150_E_TCLASS_MASK, |
| }, |
| [DA9150_IRQ_TJUNC] = { |
| .reg_offset = 0, |
| .mask = DA9150_E_TJUNC_MASK, |
| }, |
| [DA9150_IRQ_VFAULT] = { |
| .reg_offset = 0, |
| .mask = DA9150_E_VFAULT_MASK, |
| }, |
| [DA9150_IRQ_CONF] = { |
| .reg_offset = 1, |
| .mask = DA9150_E_CONF_MASK, |
| }, |
| [DA9150_IRQ_DAT] = { |
| .reg_offset = 1, |
| .mask = DA9150_E_DAT_MASK, |
| }, |
| [DA9150_IRQ_DTYPE] = { |
| .reg_offset = 1, |
| .mask = DA9150_E_DTYPE_MASK, |
| }, |
| [DA9150_IRQ_ID] = { |
| .reg_offset = 1, |
| .mask = DA9150_E_ID_MASK, |
| }, |
| [DA9150_IRQ_ADP] = { |
| .reg_offset = 1, |
| .mask = DA9150_E_ADP_MASK, |
| }, |
| [DA9150_IRQ_SESS_END] = { |
| .reg_offset = 1, |
| .mask = DA9150_E_SESS_END_MASK, |
| }, |
| [DA9150_IRQ_SESS_VLD] = { |
| .reg_offset = 1, |
| .mask = DA9150_E_SESS_VLD_MASK, |
| }, |
| [DA9150_IRQ_FG] = { |
| .reg_offset = 2, |
| .mask = DA9150_E_FG_MASK, |
| }, |
| [DA9150_IRQ_GP] = { |
| .reg_offset = 2, |
| .mask = DA9150_E_GP_MASK, |
| }, |
| [DA9150_IRQ_TBAT] = { |
| .reg_offset = 2, |
| .mask = DA9150_E_TBAT_MASK, |
| }, |
| [DA9150_IRQ_GPIOA] = { |
| .reg_offset = 2, |
| .mask = DA9150_E_GPIOA_MASK, |
| }, |
| [DA9150_IRQ_GPIOB] = { |
| .reg_offset = 2, |
| .mask = DA9150_E_GPIOB_MASK, |
| }, |
| [DA9150_IRQ_GPIOC] = { |
| .reg_offset = 2, |
| .mask = DA9150_E_GPIOC_MASK, |
| }, |
| [DA9150_IRQ_GPIOD] = { |
| .reg_offset = 2, |
| .mask = DA9150_E_GPIOD_MASK, |
| }, |
| [DA9150_IRQ_GPADC] = { |
| .reg_offset = 2, |
| .mask = DA9150_E_GPADC_MASK, |
| }, |
| [DA9150_IRQ_WKUP] = { |
| .reg_offset = 3, |
| .mask = DA9150_E_WKUP_MASK, |
| }, |
| }; |
| |
| static const struct regmap_irq_chip da9150_regmap_irq_chip = { |
| .name = "da9150_irq", |
| .status_base = DA9150_EVENT_E, |
| .mask_base = DA9150_IRQ_MASK_E, |
| .ack_base = DA9150_EVENT_E, |
| .num_regs = DA9150_NUM_IRQ_REGS, |
| .irqs = da9150_irqs, |
| .num_irqs = ARRAY_SIZE(da9150_irqs), |
| }; |
| |
| static const struct resource da9150_gpadc_resources[] = { |
| DEFINE_RES_IRQ_NAMED(DA9150_IRQ_GPADC, "GPADC"), |
| }; |
| |
| static const struct resource da9150_charger_resources[] = { |
| DEFINE_RES_IRQ_NAMED(DA9150_IRQ_CHG, "CHG_STATUS"), |
| DEFINE_RES_IRQ_NAMED(DA9150_IRQ_TJUNC, "CHG_TJUNC"), |
| DEFINE_RES_IRQ_NAMED(DA9150_IRQ_VFAULT, "CHG_VFAULT"), |
| DEFINE_RES_IRQ_NAMED(DA9150_IRQ_VBUS, "CHG_VBUS"), |
| }; |
| |
| static const struct resource da9150_fg_resources[] = { |
| DEFINE_RES_IRQ_NAMED(DA9150_IRQ_FG, "FG"), |
| }; |
| |
| enum da9150_dev_idx { |
| DA9150_GPADC_IDX = 0, |
| DA9150_CHARGER_IDX, |
| DA9150_FG_IDX, |
| }; |
| |
| static struct mfd_cell da9150_devs[] = { |
| [DA9150_GPADC_IDX] = { |
| .name = "da9150-gpadc", |
| .of_compatible = "dlg,da9150-gpadc", |
| .resources = da9150_gpadc_resources, |
| .num_resources = ARRAY_SIZE(da9150_gpadc_resources), |
| }, |
| [DA9150_CHARGER_IDX] = { |
| .name = "da9150-charger", |
| .of_compatible = "dlg,da9150-charger", |
| .resources = da9150_charger_resources, |
| .num_resources = ARRAY_SIZE(da9150_charger_resources), |
| }, |
| [DA9150_FG_IDX] = { |
| .name = "da9150-fuel-gauge", |
| .of_compatible = "dlg,da9150-fuel-gauge", |
| .resources = da9150_fg_resources, |
| .num_resources = ARRAY_SIZE(da9150_fg_resources), |
| }, |
| }; |
| |
| static int da9150_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct da9150 *da9150; |
| struct da9150_pdata *pdata = dev_get_platdata(&client->dev); |
| int qif_addr; |
| int ret; |
| |
| da9150 = devm_kzalloc(&client->dev, sizeof(*da9150), GFP_KERNEL); |
| if (!da9150) |
| return -ENOMEM; |
| |
| da9150->dev = &client->dev; |
| da9150->irq = client->irq; |
| i2c_set_clientdata(client, da9150); |
| |
| da9150->regmap = devm_regmap_init_i2c(client, &da9150_regmap_config); |
| if (IS_ERR(da9150->regmap)) { |
| ret = PTR_ERR(da9150->regmap); |
| dev_err(da9150->dev, "Failed to allocate register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| /* Setup secondary I2C interface for QIF access */ |
| qif_addr = da9150_reg_read(da9150, DA9150_CORE2WIRE_CTRL_A); |
| qif_addr = (qif_addr & DA9150_CORE_BASE_ADDR_MASK) >> 1; |
| qif_addr |= DA9150_QIF_I2C_ADDR_LSB; |
| da9150->core_qif = i2c_new_dummy_device(client->adapter, qif_addr); |
| if (IS_ERR(da9150->core_qif)) { |
| dev_err(da9150->dev, "Failed to attach QIF client\n"); |
| return PTR_ERR(da9150->core_qif); |
| } |
| |
| i2c_set_clientdata(da9150->core_qif, da9150); |
| |
| if (pdata) { |
| da9150->irq_base = pdata->irq_base; |
| |
| da9150_devs[DA9150_FG_IDX].platform_data = pdata->fg_pdata; |
| da9150_devs[DA9150_FG_IDX].pdata_size = |
| sizeof(struct da9150_fg_pdata); |
| } else { |
| da9150->irq_base = -1; |
| } |
| |
| ret = regmap_add_irq_chip(da9150->regmap, da9150->irq, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| da9150->irq_base, &da9150_regmap_irq_chip, |
| &da9150->regmap_irq_data); |
| if (ret) { |
| dev_err(da9150->dev, "Failed to add regmap irq chip: %d\n", |
| ret); |
| goto regmap_irq_fail; |
| } |
| |
| |
| da9150->irq_base = regmap_irq_chip_get_base(da9150->regmap_irq_data); |
| |
| enable_irq_wake(da9150->irq); |
| |
| ret = mfd_add_devices(da9150->dev, -1, da9150_devs, |
| ARRAY_SIZE(da9150_devs), NULL, |
| da9150->irq_base, NULL); |
| if (ret) { |
| dev_err(da9150->dev, "Failed to add child devices: %d\n", ret); |
| goto mfd_fail; |
| } |
| |
| return 0; |
| |
| mfd_fail: |
| regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data); |
| regmap_irq_fail: |
| i2c_unregister_device(da9150->core_qif); |
| |
| return ret; |
| } |
| |
| static void da9150_remove(struct i2c_client *client) |
| { |
| struct da9150 *da9150 = i2c_get_clientdata(client); |
| |
| regmap_del_irq_chip(da9150->irq, da9150->regmap_irq_data); |
| mfd_remove_devices(da9150->dev); |
| i2c_unregister_device(da9150->core_qif); |
| } |
| |
| static void da9150_shutdown(struct i2c_client *client) |
| { |
| struct da9150 *da9150 = i2c_get_clientdata(client); |
| |
| /* Make sure we have a wakup source for the device */ |
| da9150_set_bits(da9150, DA9150_CONFIG_D, |
| DA9150_WKUP_PM_EN_MASK, |
| DA9150_WKUP_PM_EN_MASK); |
| |
| /* Set device to DISABLED mode */ |
| da9150_set_bits(da9150, DA9150_CONTROL_C, |
| DA9150_DISABLE_MASK, DA9150_DISABLE_MASK); |
| } |
| |
| static const struct i2c_device_id da9150_i2c_id[] = { |
| { "da9150", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, da9150_i2c_id); |
| |
| static const struct of_device_id da9150_of_match[] = { |
| { .compatible = "dlg,da9150", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, da9150_of_match); |
| |
| static struct i2c_driver da9150_driver = { |
| .driver = { |
| .name = "da9150", |
| .of_match_table = da9150_of_match, |
| }, |
| .probe = da9150_probe, |
| .remove = da9150_remove, |
| .shutdown = da9150_shutdown, |
| .id_table = da9150_i2c_id, |
| }; |
| |
| module_i2c_driver(da9150_driver); |
| |
| MODULE_DESCRIPTION("MFD Core Driver for DA9150"); |
| MODULE_AUTHOR("Adam Thomson <Adam.Thomson.Opensource@diasemi.com>"); |
| MODULE_LICENSE("GPL"); |