| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2013-2022, Intel Corporation. All rights reserved. |
| * Intel Management Engine Interface (Intel MEI) Linux driver |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/slab.h> |
| #include <linux/uuid.h> |
| |
| #include <linux/mei_cl_bus.h> |
| |
| #include "mei_dev.h" |
| #include "client.h" |
| #include "mkhi.h" |
| |
| #define MEI_UUID_NFC_INFO UUID_LE(0xd2de1625, 0x382d, 0x417d, \ |
| 0x48, 0xa4, 0xef, 0xab, 0xba, 0x8a, 0x12, 0x06) |
| |
| static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO; |
| |
| #define MEI_UUID_NFC_HCI UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, \ |
| 0x94, 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c) |
| |
| #define MEI_UUID_WD UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, \ |
| 0x89, 0x9D, 0xA9, 0x15, 0x14, 0xCB, 0x32, 0xAB) |
| |
| #define MEI_UUID_MKHIF_FIX UUID_LE(0x55213584, 0x9a29, 0x4916, \ |
| 0xba, 0xdf, 0xf, 0xb7, 0xed, 0x68, 0x2a, 0xeb) |
| |
| #define MEI_UUID_IGSC_MKHI UUID_LE(0xE2C2AFA2, 0x3817, 0x4D19, \ |
| 0x9D, 0x95, 0x06, 0xB1, 0x6B, 0x58, 0x8A, 0x5D) |
| |
| #define MEI_UUID_IGSC_MKHI_FIX UUID_LE(0x46E0C1FB, 0xA546, 0x414F, \ |
| 0x91, 0x70, 0xB7, 0xF4, 0x6D, 0x57, 0xB4, 0xAD) |
| |
| #define MEI_UUID_HDCP UUID_LE(0xB638AB7E, 0x94E2, 0x4EA2, \ |
| 0xA5, 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04) |
| |
| #define MEI_UUID_PAVP UUID_LE(0xfbf6fcf1, 0x96cf, 0x4e2e, 0xA6, \ |
| 0xa6, 0x1b, 0xab, 0x8c, 0xbe, 0x36, 0xb1) |
| |
| #define MEI_UUID_ANY NULL_UUID_LE |
| |
| /** |
| * number_of_connections - determine whether an client be on the bus |
| * according number of connections |
| * We support only clients: |
| * 1. with single connection |
| * 2. and fixed clients (max_number_of_connections == 0) |
| * |
| * @cldev: me clients device |
| */ |
| static void number_of_connections(struct mei_cl_device *cldev) |
| { |
| if (cldev->me_cl->props.max_number_of_connections > 1) |
| cldev->do_match = 0; |
| } |
| |
| /** |
| * blacklist - blacklist a client from the bus |
| * |
| * @cldev: me clients device |
| */ |
| static void blacklist(struct mei_cl_device *cldev) |
| { |
| cldev->do_match = 0; |
| } |
| |
| /** |
| * whitelist - forcefully whitelist client |
| * |
| * @cldev: me clients device |
| */ |
| static void whitelist(struct mei_cl_device *cldev) |
| { |
| cldev->do_match = 1; |
| } |
| |
| #define OSTYPE_LINUX 2 |
| struct mei_os_ver { |
| __le16 build; |
| __le16 reserved1; |
| u8 os_type; |
| u8 major; |
| u8 minor; |
| u8 reserved2; |
| } __packed; |
| |
| struct mkhi_fw_ver_block { |
| u16 minor; |
| u8 major; |
| u8 platform; |
| u16 buildno; |
| u16 hotfix; |
| } __packed; |
| |
| struct mkhi_fw_ver { |
| struct mkhi_fw_ver_block ver[MEI_MAX_FW_VER_BLOCKS]; |
| } __packed; |
| |
| #define MKHI_OSVER_BUF_LEN (sizeof(struct mkhi_msg_hdr) + \ |
| sizeof(struct mkhi_fwcaps) + \ |
| sizeof(struct mei_os_ver)) |
| static int mei_osver(struct mei_cl_device *cldev) |
| { |
| const size_t size = MKHI_OSVER_BUF_LEN; |
| char buf[MKHI_OSVER_BUF_LEN]; |
| struct mkhi_msg *req; |
| struct mkhi_fwcaps *fwcaps; |
| struct mei_os_ver *os_ver; |
| unsigned int mode = MEI_CL_IO_TX_BLOCKING | MEI_CL_IO_TX_INTERNAL; |
| |
| memset(buf, 0, size); |
| |
| req = (struct mkhi_msg *)buf; |
| req->hdr.group_id = MKHI_FWCAPS_GROUP_ID; |
| req->hdr.command = MKHI_FWCAPS_SET_OS_VER_APP_RULE_CMD; |
| |
| fwcaps = (struct mkhi_fwcaps *)req->data; |
| |
| fwcaps->id.rule_type = 0x0; |
| fwcaps->id.feature_id = MKHI_FEATURE_PTT; |
| fwcaps->len = sizeof(*os_ver); |
| os_ver = (struct mei_os_ver *)fwcaps->data; |
| os_ver->os_type = OSTYPE_LINUX; |
| |
| return __mei_cl_send(cldev->cl, buf, size, 0, mode); |
| } |
| |
| #define MKHI_FWVER_BUF_LEN (sizeof(struct mkhi_msg_hdr) + \ |
| sizeof(struct mkhi_fw_ver)) |
| #define MKHI_FWVER_LEN(__num) (sizeof(struct mkhi_msg_hdr) + \ |
| sizeof(struct mkhi_fw_ver_block) * (__num)) |
| static int mei_fwver(struct mei_cl_device *cldev) |
| { |
| char buf[MKHI_FWVER_BUF_LEN]; |
| struct mkhi_msg req; |
| struct mkhi_msg *rsp; |
| struct mkhi_fw_ver *fwver; |
| int bytes_recv, ret, i; |
| |
| memset(buf, 0, sizeof(buf)); |
| |
| req.hdr.group_id = MKHI_GEN_GROUP_ID; |
| req.hdr.command = MKHI_GEN_GET_FW_VERSION_CMD; |
| |
| ret = __mei_cl_send(cldev->cl, (u8 *)&req, sizeof(req), 0, |
| MEI_CL_IO_TX_BLOCKING); |
| if (ret < 0) { |
| dev_err(&cldev->dev, "Could not send ReqFWVersion cmd\n"); |
| return ret; |
| } |
| |
| ret = 0; |
| bytes_recv = __mei_cl_recv(cldev->cl, buf, sizeof(buf), NULL, 0, |
| cldev->bus->timeouts.mkhi_recv); |
| if (bytes_recv < 0 || (size_t)bytes_recv < MKHI_FWVER_LEN(1)) { |
| /* |
| * Should be at least one version block, |
| * error out if nothing found |
| */ |
| dev_err(&cldev->dev, "Could not read FW version\n"); |
| return -EIO; |
| } |
| |
| rsp = (struct mkhi_msg *)buf; |
| fwver = (struct mkhi_fw_ver *)rsp->data; |
| memset(cldev->bus->fw_ver, 0, sizeof(cldev->bus->fw_ver)); |
| for (i = 0; i < MEI_MAX_FW_VER_BLOCKS; i++) { |
| if ((size_t)bytes_recv < MKHI_FWVER_LEN(i + 1)) |
| break; |
| dev_dbg(&cldev->dev, "FW version%d %d:%d.%d.%d.%d\n", |
| i, fwver->ver[i].platform, |
| fwver->ver[i].major, fwver->ver[i].minor, |
| fwver->ver[i].hotfix, fwver->ver[i].buildno); |
| |
| cldev->bus->fw_ver[i].platform = fwver->ver[i].platform; |
| cldev->bus->fw_ver[i].major = fwver->ver[i].major; |
| cldev->bus->fw_ver[i].minor = fwver->ver[i].minor; |
| cldev->bus->fw_ver[i].hotfix = fwver->ver[i].hotfix; |
| cldev->bus->fw_ver[i].buildno = fwver->ver[i].buildno; |
| } |
| |
| return ret; |
| } |
| |
| static int mei_gfx_memory_ready(struct mei_cl_device *cldev) |
| { |
| struct mkhi_gfx_mem_ready req = {0}; |
| unsigned int mode = MEI_CL_IO_TX_INTERNAL; |
| |
| req.hdr.group_id = MKHI_GROUP_ID_GFX; |
| req.hdr.command = MKHI_GFX_MEMORY_READY_CMD_REQ; |
| req.flags = MKHI_GFX_MEM_READY_PXP_ALLOWED; |
| |
| dev_dbg(&cldev->dev, "Sending memory ready command\n"); |
| return __mei_cl_send(cldev->cl, (u8 *)&req, sizeof(req), 0, mode); |
| } |
| |
| static void mei_mkhi_fix(struct mei_cl_device *cldev) |
| { |
| int ret; |
| |
| /* No need to enable the client if nothing is needed from it */ |
| if (!cldev->bus->fw_f_fw_ver_supported && |
| !cldev->bus->hbm_f_os_supported) |
| return; |
| |
| ret = mei_cldev_enable(cldev); |
| if (ret) |
| return; |
| |
| if (cldev->bus->fw_f_fw_ver_supported) { |
| ret = mei_fwver(cldev); |
| if (ret < 0) |
| dev_err(&cldev->dev, "FW version command failed %d\n", |
| ret); |
| } |
| |
| if (cldev->bus->hbm_f_os_supported) { |
| ret = mei_osver(cldev); |
| if (ret < 0) |
| dev_err(&cldev->dev, "OS version command failed %d\n", |
| ret); |
| } |
| mei_cldev_disable(cldev); |
| } |
| |
| static void mei_gsc_mkhi_ver(struct mei_cl_device *cldev) |
| { |
| int ret; |
| |
| /* No need to enable the client if nothing is needed from it */ |
| if (!cldev->bus->fw_f_fw_ver_supported) |
| return; |
| |
| ret = mei_cldev_enable(cldev); |
| if (ret) |
| return; |
| |
| ret = mei_fwver(cldev); |
| if (ret < 0) |
| dev_err(&cldev->dev, "FW version command failed %d\n", ret); |
| mei_cldev_disable(cldev); |
| } |
| |
| static void mei_gsc_mkhi_fix_ver(struct mei_cl_device *cldev) |
| { |
| int ret; |
| |
| /* No need to enable the client if nothing is needed from it */ |
| if (!cldev->bus->fw_f_fw_ver_supported && |
| cldev->bus->pxp_mode != MEI_DEV_PXP_INIT) |
| return; |
| |
| ret = mei_cldev_enable(cldev); |
| if (ret) |
| return; |
| |
| if (cldev->bus->pxp_mode == MEI_DEV_PXP_INIT) { |
| ret = mei_gfx_memory_ready(cldev); |
| if (ret < 0) |
| dev_err(&cldev->dev, "memory ready command failed %d\n", ret); |
| else |
| dev_dbg(&cldev->dev, "memory ready command sent\n"); |
| /* we go to reset after that */ |
| cldev->bus->pxp_mode = MEI_DEV_PXP_SETUP; |
| goto out; |
| } |
| |
| ret = mei_fwver(cldev); |
| if (ret < 0) |
| dev_err(&cldev->dev, "FW version command failed %d\n", |
| ret); |
| out: |
| mei_cldev_disable(cldev); |
| } |
| |
| /** |
| * mei_wd - wd client on the bus, change protocol version |
| * as the API has changed. |
| * |
| * @cldev: me clients device |
| */ |
| #if IS_ENABLED(CONFIG_INTEL_MEI_ME) |
| #include <linux/pci.h> |
| #include "hw-me-regs.h" |
| static void mei_wd(struct mei_cl_device *cldev) |
| { |
| struct pci_dev *pdev = to_pci_dev(cldev->dev.parent); |
| |
| if (pdev->device == MEI_DEV_ID_WPT_LP || |
| pdev->device == MEI_DEV_ID_SPT || |
| pdev->device == MEI_DEV_ID_SPT_H) |
| cldev->me_cl->props.protocol_version = 0x2; |
| |
| cldev->do_match = 1; |
| } |
| #else |
| static inline void mei_wd(struct mei_cl_device *cldev) {} |
| #endif /* CONFIG_INTEL_MEI_ME */ |
| |
| struct mei_nfc_cmd { |
| u8 command; |
| u8 status; |
| u16 req_id; |
| u32 reserved; |
| u16 data_size; |
| u8 sub_command; |
| u8 data[]; |
| } __packed; |
| |
| struct mei_nfc_reply { |
| u8 command; |
| u8 status; |
| u16 req_id; |
| u32 reserved; |
| u16 data_size; |
| u8 sub_command; |
| u8 reply_status; |
| u8 data[]; |
| } __packed; |
| |
| struct mei_nfc_if_version { |
| u8 radio_version_sw[3]; |
| u8 reserved[3]; |
| u8 radio_version_hw[3]; |
| u8 i2c_addr; |
| u8 fw_ivn; |
| u8 vendor_id; |
| u8 radio_type; |
| } __packed; |
| |
| |
| #define MEI_NFC_CMD_MAINTENANCE 0x00 |
| #define MEI_NFC_SUBCMD_IF_VERSION 0x01 |
| |
| /* Vendors */ |
| #define MEI_NFC_VENDOR_INSIDE 0x00 |
| #define MEI_NFC_VENDOR_NXP 0x01 |
| |
| /* Radio types */ |
| #define MEI_NFC_VENDOR_INSIDE_UREAD 0x00 |
| #define MEI_NFC_VENDOR_NXP_PN544 0x01 |
| |
| /** |
| * mei_nfc_if_version - get NFC interface version |
| * |
| * @cl: host client (nfc info) |
| * @ver: NFC interface version to be filled in |
| * |
| * Return: 0 on success; < 0 otherwise |
| */ |
| static int mei_nfc_if_version(struct mei_cl *cl, |
| struct mei_nfc_if_version *ver) |
| { |
| struct mei_device *bus; |
| struct mei_nfc_cmd cmd = { |
| .command = MEI_NFC_CMD_MAINTENANCE, |
| .data_size = 1, |
| .sub_command = MEI_NFC_SUBCMD_IF_VERSION, |
| }; |
| struct mei_nfc_reply *reply = NULL; |
| size_t if_version_length; |
| u8 vtag; |
| int bytes_recv, ret; |
| |
| bus = cl->dev; |
| |
| WARN_ON(mutex_is_locked(&bus->device_lock)); |
| |
| ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(cmd), 0, |
| MEI_CL_IO_TX_BLOCKING); |
| if (ret < 0) { |
| dev_err(bus->dev, "Could not send IF version cmd\n"); |
| return ret; |
| } |
| |
| /* to be sure on the stack we alloc memory */ |
| if_version_length = sizeof(*reply) + sizeof(*ver); |
| |
| reply = kzalloc(if_version_length, GFP_KERNEL); |
| if (!reply) |
| return -ENOMEM; |
| |
| ret = 0; |
| bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length, &vtag, |
| 0, 0); |
| if (bytes_recv < 0 || (size_t)bytes_recv < if_version_length) { |
| dev_err(bus->dev, "Could not read IF version\n"); |
| ret = -EIO; |
| goto err; |
| } |
| |
| memcpy(ver, reply->data, sizeof(*ver)); |
| |
| dev_info(bus->dev, "NFC MEI VERSION: IVN 0x%x Vendor ID 0x%x Type 0x%x\n", |
| ver->fw_ivn, ver->vendor_id, ver->radio_type); |
| |
| err: |
| kfree(reply); |
| return ret; |
| } |
| |
| /** |
| * mei_nfc_radio_name - derive nfc radio name from the interface version |
| * |
| * @ver: NFC radio version |
| * |
| * Return: radio name string |
| */ |
| static const char *mei_nfc_radio_name(struct mei_nfc_if_version *ver) |
| { |
| |
| if (ver->vendor_id == MEI_NFC_VENDOR_INSIDE) { |
| if (ver->radio_type == MEI_NFC_VENDOR_INSIDE_UREAD) |
| return "microread"; |
| } |
| |
| if (ver->vendor_id == MEI_NFC_VENDOR_NXP) { |
| if (ver->radio_type == MEI_NFC_VENDOR_NXP_PN544) |
| return "pn544"; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * mei_nfc - The nfc fixup function. The function retrieves nfc radio |
| * name and set is as device attribute so we can load |
| * the proper device driver for it |
| * |
| * @cldev: me client device (nfc) |
| */ |
| static void mei_nfc(struct mei_cl_device *cldev) |
| { |
| struct mei_device *bus; |
| struct mei_cl *cl; |
| struct mei_me_client *me_cl = NULL; |
| struct mei_nfc_if_version ver; |
| const char *radio_name = NULL; |
| int ret; |
| |
| bus = cldev->bus; |
| |
| mutex_lock(&bus->device_lock); |
| /* we need to connect to INFO GUID */ |
| cl = mei_cl_alloc_linked(bus); |
| if (IS_ERR(cl)) { |
| ret = PTR_ERR(cl); |
| cl = NULL; |
| dev_err(bus->dev, "nfc hook alloc failed %d\n", ret); |
| goto out; |
| } |
| |
| me_cl = mei_me_cl_by_uuid(bus, &mei_nfc_info_guid); |
| if (!me_cl) { |
| ret = -ENOTTY; |
| dev_err(bus->dev, "Cannot find nfc info %d\n", ret); |
| goto out; |
| } |
| |
| ret = mei_cl_connect(cl, me_cl, NULL); |
| if (ret < 0) { |
| dev_err(&cldev->dev, "Can't connect to the NFC INFO ME ret = %d\n", |
| ret); |
| goto out; |
| } |
| |
| mutex_unlock(&bus->device_lock); |
| |
| ret = mei_nfc_if_version(cl, &ver); |
| if (ret) |
| goto disconnect; |
| |
| radio_name = mei_nfc_radio_name(&ver); |
| |
| if (!radio_name) { |
| ret = -ENOENT; |
| dev_err(&cldev->dev, "Can't get the NFC interface version ret = %d\n", |
| ret); |
| goto disconnect; |
| } |
| |
| dev_dbg(bus->dev, "nfc radio %s\n", radio_name); |
| strscpy(cldev->name, radio_name, sizeof(cldev->name)); |
| |
| disconnect: |
| mutex_lock(&bus->device_lock); |
| if (mei_cl_disconnect(cl) < 0) |
| dev_err(bus->dev, "Can't disconnect the NFC INFO ME\n"); |
| |
| mei_cl_flush_queues(cl, NULL); |
| |
| out: |
| mei_cl_unlink(cl); |
| mutex_unlock(&bus->device_lock); |
| mei_me_cl_put(me_cl); |
| kfree(cl); |
| |
| if (ret) |
| cldev->do_match = 0; |
| |
| dev_dbg(bus->dev, "end of fixup match = %d\n", cldev->do_match); |
| } |
| |
| /** |
| * vt_support - enable on bus clients with vtag support |
| * |
| * @cldev: me clients device |
| */ |
| static void vt_support(struct mei_cl_device *cldev) |
| { |
| if (cldev->me_cl->props.vt_supported == 1) |
| cldev->do_match = 1; |
| } |
| |
| /** |
| * pxp_is_ready - enable bus client if pxp is ready |
| * |
| * @cldev: me clients device |
| */ |
| static void pxp_is_ready(struct mei_cl_device *cldev) |
| { |
| struct mei_device *bus = cldev->bus; |
| |
| switch (bus->pxp_mode) { |
| case MEI_DEV_PXP_READY: |
| case MEI_DEV_PXP_DEFAULT: |
| cldev->do_match = 1; |
| break; |
| default: |
| cldev->do_match = 0; |
| break; |
| } |
| } |
| |
| #define MEI_FIXUP(_uuid, _hook) { _uuid, _hook } |
| |
| static struct mei_fixup { |
| |
| const uuid_le uuid; |
| void (*hook)(struct mei_cl_device *cldev); |
| } mei_fixups[] = { |
| MEI_FIXUP(MEI_UUID_ANY, number_of_connections), |
| MEI_FIXUP(MEI_UUID_NFC_INFO, blacklist), |
| MEI_FIXUP(MEI_UUID_NFC_HCI, mei_nfc), |
| MEI_FIXUP(MEI_UUID_WD, mei_wd), |
| MEI_FIXUP(MEI_UUID_MKHIF_FIX, mei_mkhi_fix), |
| MEI_FIXUP(MEI_UUID_IGSC_MKHI, mei_gsc_mkhi_ver), |
| MEI_FIXUP(MEI_UUID_IGSC_MKHI_FIX, mei_gsc_mkhi_fix_ver), |
| MEI_FIXUP(MEI_UUID_HDCP, whitelist), |
| MEI_FIXUP(MEI_UUID_ANY, vt_support), |
| MEI_FIXUP(MEI_UUID_PAVP, pxp_is_ready), |
| }; |
| |
| /** |
| * mei_cl_bus_dev_fixup - run fixup handlers |
| * |
| * @cldev: me client device |
| */ |
| void mei_cl_bus_dev_fixup(struct mei_cl_device *cldev) |
| { |
| struct mei_fixup *f; |
| const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); |
| size_t i; |
| |
| for (i = 0; i < ARRAY_SIZE(mei_fixups); i++) { |
| |
| f = &mei_fixups[i]; |
| if (uuid_le_cmp(f->uuid, MEI_UUID_ANY) == 0 || |
| uuid_le_cmp(f->uuid, *uuid) == 0) |
| f->hook(cldev); |
| } |
| } |
| |