| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * power_supply_hwmon.c - power supply hwmon support. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/hwmon.h> |
| #include <linux/power_supply.h> |
| #include <linux/slab.h> |
| |
| struct power_supply_hwmon { |
| struct power_supply *psy; |
| unsigned long *props; |
| }; |
| |
| static const char *const ps_temp_label[] = { |
| "temp", |
| "ambient temp", |
| }; |
| |
| static int power_supply_hwmon_in_to_property(u32 attr) |
| { |
| switch (attr) { |
| case hwmon_in_average: |
| return POWER_SUPPLY_PROP_VOLTAGE_AVG; |
| case hwmon_in_min: |
| return POWER_SUPPLY_PROP_VOLTAGE_MIN; |
| case hwmon_in_max: |
| return POWER_SUPPLY_PROP_VOLTAGE_MAX; |
| case hwmon_in_input: |
| return POWER_SUPPLY_PROP_VOLTAGE_NOW; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int power_supply_hwmon_curr_to_property(u32 attr) |
| { |
| switch (attr) { |
| case hwmon_curr_average: |
| return POWER_SUPPLY_PROP_CURRENT_AVG; |
| case hwmon_curr_max: |
| return POWER_SUPPLY_PROP_CURRENT_MAX; |
| case hwmon_curr_input: |
| return POWER_SUPPLY_PROP_CURRENT_NOW; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int power_supply_hwmon_temp_to_property(u32 attr, int channel) |
| { |
| if (channel) { |
| switch (attr) { |
| case hwmon_temp_input: |
| return POWER_SUPPLY_PROP_TEMP_AMBIENT; |
| case hwmon_temp_min_alarm: |
| return POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN; |
| case hwmon_temp_max_alarm: |
| return POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX; |
| default: |
| break; |
| } |
| } else { |
| switch (attr) { |
| case hwmon_temp_input: |
| return POWER_SUPPLY_PROP_TEMP; |
| case hwmon_temp_max: |
| return POWER_SUPPLY_PROP_TEMP_MAX; |
| case hwmon_temp_min: |
| return POWER_SUPPLY_PROP_TEMP_MIN; |
| case hwmon_temp_min_alarm: |
| return POWER_SUPPLY_PROP_TEMP_ALERT_MIN; |
| case hwmon_temp_max_alarm: |
| return POWER_SUPPLY_PROP_TEMP_ALERT_MAX; |
| default: |
| break; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int |
| power_supply_hwmon_to_property(enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| switch (type) { |
| case hwmon_in: |
| return power_supply_hwmon_in_to_property(attr); |
| case hwmon_curr: |
| return power_supply_hwmon_curr_to_property(attr); |
| case hwmon_temp: |
| return power_supply_hwmon_temp_to_property(attr, channel); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static bool power_supply_hwmon_is_a_label(enum hwmon_sensor_types type, |
| u32 attr) |
| { |
| return type == hwmon_temp && attr == hwmon_temp_label; |
| } |
| |
| struct hwmon_type_attr_list { |
| const u32 *attrs; |
| size_t n_attrs; |
| }; |
| |
| static const u32 ps_temp_attrs[] = { |
| hwmon_temp_input, |
| hwmon_temp_min, hwmon_temp_max, |
| hwmon_temp_min_alarm, hwmon_temp_max_alarm, |
| }; |
| |
| static const struct hwmon_type_attr_list ps_type_attrs[hwmon_max] = { |
| [hwmon_temp] = { ps_temp_attrs, ARRAY_SIZE(ps_temp_attrs) }, |
| }; |
| |
| static bool power_supply_hwmon_has_input( |
| const struct power_supply_hwmon *psyhw, |
| enum hwmon_sensor_types type, int channel) |
| { |
| const struct hwmon_type_attr_list *attr_list = &ps_type_attrs[type]; |
| size_t i; |
| |
| for (i = 0; i < attr_list->n_attrs; ++i) { |
| int prop = power_supply_hwmon_to_property(type, |
| attr_list->attrs[i], channel); |
| |
| if (prop >= 0 && test_bit(prop, psyhw->props)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static bool power_supply_hwmon_is_writable(enum hwmon_sensor_types type, |
| u32 attr) |
| { |
| switch (type) { |
| case hwmon_in: |
| return attr == hwmon_in_min || |
| attr == hwmon_in_max; |
| case hwmon_curr: |
| return attr == hwmon_curr_max; |
| case hwmon_temp: |
| return attr == hwmon_temp_max || |
| attr == hwmon_temp_min || |
| attr == hwmon_temp_min_alarm || |
| attr == hwmon_temp_max_alarm; |
| default: |
| return false; |
| } |
| } |
| |
| static umode_t power_supply_hwmon_is_visible(const void *data, |
| enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| const struct power_supply_hwmon *psyhw = data; |
| int prop; |
| |
| if (power_supply_hwmon_is_a_label(type, attr)) { |
| if (power_supply_hwmon_has_input(psyhw, type, channel)) |
| return 0444; |
| else |
| return 0; |
| } |
| |
| prop = power_supply_hwmon_to_property(type, attr, channel); |
| if (prop < 0 || !test_bit(prop, psyhw->props)) |
| return 0; |
| |
| if (power_supply_property_is_writeable(psyhw->psy, prop) > 0 && |
| power_supply_hwmon_is_writable(type, attr)) |
| return 0644; |
| |
| return 0444; |
| } |
| |
| static int power_supply_hwmon_read_string(struct device *dev, |
| enum hwmon_sensor_types type, |
| u32 attr, int channel, |
| const char **str) |
| { |
| switch (type) { |
| case hwmon_temp: |
| *str = ps_temp_label[channel]; |
| break; |
| default: |
| /* unreachable, but see: |
| * gcc bug #51513 [1] and clang bug #978 [2] |
| * |
| * [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=51513 |
| * [2] https://github.com/ClangBuiltLinux/linux/issues/978 |
| */ |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| power_supply_hwmon_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| struct power_supply_hwmon *psyhw = dev_get_drvdata(dev); |
| struct power_supply *psy = psyhw->psy; |
| union power_supply_propval pspval; |
| int ret, prop; |
| |
| prop = power_supply_hwmon_to_property(type, attr, channel); |
| if (prop < 0) |
| return prop; |
| |
| ret = power_supply_get_property(psy, prop, &pspval); |
| if (ret) |
| return ret; |
| |
| switch (type) { |
| /* |
| * Both voltage and current is reported in units of |
| * microvolts/microamps, so we need to adjust it to |
| * milliamps(volts) |
| */ |
| case hwmon_curr: |
| case hwmon_in: |
| pspval.intval = DIV_ROUND_CLOSEST(pspval.intval, 1000); |
| break; |
| /* |
| * Temp needs to be converted from 1/10 C to milli-C |
| */ |
| case hwmon_temp: |
| if (check_mul_overflow(pspval.intval, 100, |
| &pspval.intval)) |
| return -EOVERFLOW; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *val = pspval.intval; |
| |
| return 0; |
| } |
| |
| static int |
| power_supply_hwmon_write(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long val) |
| { |
| struct power_supply_hwmon *psyhw = dev_get_drvdata(dev); |
| struct power_supply *psy = psyhw->psy; |
| union power_supply_propval pspval; |
| int prop; |
| |
| prop = power_supply_hwmon_to_property(type, attr, channel); |
| if (prop < 0) |
| return prop; |
| |
| pspval.intval = val; |
| |
| switch (type) { |
| /* |
| * Both voltage and current is reported in units of |
| * microvolts/microamps, so we need to adjust it to |
| * milliamps(volts) |
| */ |
| case hwmon_curr: |
| case hwmon_in: |
| if (check_mul_overflow(pspval.intval, 1000, |
| &pspval.intval)) |
| return -EOVERFLOW; |
| break; |
| /* |
| * Temp needs to be converted from 1/10 C to milli-C |
| */ |
| case hwmon_temp: |
| pspval.intval = DIV_ROUND_CLOSEST(pspval.intval, 100); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return power_supply_set_property(psy, prop, &pspval); |
| } |
| |
| static const struct hwmon_ops power_supply_hwmon_ops = { |
| .is_visible = power_supply_hwmon_is_visible, |
| .read = power_supply_hwmon_read, |
| .write = power_supply_hwmon_write, |
| .read_string = power_supply_hwmon_read_string, |
| }; |
| |
| static const struct hwmon_channel_info *power_supply_hwmon_info[] = { |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_LABEL | |
| HWMON_T_INPUT | |
| HWMON_T_MAX | |
| HWMON_T_MIN | |
| HWMON_T_MIN_ALARM, |
| |
| HWMON_T_LABEL | |
| HWMON_T_INPUT | |
| HWMON_T_MIN_ALARM | |
| HWMON_T_MAX_ALARM), |
| |
| HWMON_CHANNEL_INFO(curr, |
| HWMON_C_AVERAGE | |
| HWMON_C_MAX | |
| HWMON_C_INPUT), |
| |
| HWMON_CHANNEL_INFO(in, |
| HWMON_I_AVERAGE | |
| HWMON_I_MIN | |
| HWMON_I_MAX | |
| HWMON_I_INPUT), |
| NULL |
| }; |
| |
| static const struct hwmon_chip_info power_supply_hwmon_chip_info = { |
| .ops = &power_supply_hwmon_ops, |
| .info = power_supply_hwmon_info, |
| }; |
| |
| int power_supply_add_hwmon_sysfs(struct power_supply *psy) |
| { |
| const struct power_supply_desc *desc = psy->desc; |
| struct power_supply_hwmon *psyhw; |
| struct device *dev = &psy->dev; |
| struct device *hwmon; |
| int ret, i; |
| const char *name; |
| |
| if (!devres_open_group(dev, power_supply_add_hwmon_sysfs, |
| GFP_KERNEL)) |
| return -ENOMEM; |
| |
| psyhw = devm_kzalloc(dev, sizeof(*psyhw), GFP_KERNEL); |
| if (!psyhw) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| psyhw->psy = psy; |
| psyhw->props = devm_bitmap_zalloc(dev, |
| POWER_SUPPLY_PROP_TIME_TO_FULL_AVG + 1, |
| GFP_KERNEL); |
| if (!psyhw->props) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| for (i = 0; i < desc->num_properties; i++) { |
| const enum power_supply_property prop = desc->properties[i]; |
| |
| switch (prop) { |
| case POWER_SUPPLY_PROP_CURRENT_AVG: |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| case POWER_SUPPLY_PROP_TEMP: |
| case POWER_SUPPLY_PROP_TEMP_MAX: |
| case POWER_SUPPLY_PROP_TEMP_MIN: |
| case POWER_SUPPLY_PROP_TEMP_ALERT_MIN: |
| case POWER_SUPPLY_PROP_TEMP_ALERT_MAX: |
| case POWER_SUPPLY_PROP_TEMP_AMBIENT: |
| case POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN: |
| case POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX: |
| case POWER_SUPPLY_PROP_VOLTAGE_AVG: |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN: |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX: |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| set_bit(prop, psyhw->props); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| name = psy->desc->name; |
| if (strchr(name, '-')) { |
| char *new_name; |
| |
| new_name = devm_kstrdup(dev, name, GFP_KERNEL); |
| if (!new_name) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| strreplace(new_name, '-', '_'); |
| name = new_name; |
| } |
| hwmon = devm_hwmon_device_register_with_info(dev, name, |
| psyhw, |
| &power_supply_hwmon_chip_info, |
| NULL); |
| ret = PTR_ERR_OR_ZERO(hwmon); |
| if (ret) |
| goto error; |
| |
| devres_close_group(dev, power_supply_add_hwmon_sysfs); |
| return 0; |
| error: |
| devres_release_group(dev, NULL); |
| return ret; |
| } |
| |
| void power_supply_remove_hwmon_sysfs(struct power_supply *psy) |
| { |
| devres_release_group(&psy->dev, power_supply_add_hwmon_sysfs); |
| } |