| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * RTC driver for the Micro Crystal RV3028 |
| * |
| * Copyright (C) 2019 Micro Crystal SA |
| * |
| * Alexandre Belloni <alexandre.belloni@bootlin.com> |
| * |
| */ |
| |
| #include <linux/clk-provider.h> |
| #include <linux/bcd.h> |
| #include <linux/bitfield.h> |
| #include <linux/bitops.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/log2.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/regmap.h> |
| #include <linux/rtc.h> |
| |
| #define RV3028_SEC 0x00 |
| #define RV3028_MIN 0x01 |
| #define RV3028_HOUR 0x02 |
| #define RV3028_WDAY 0x03 |
| #define RV3028_DAY 0x04 |
| #define RV3028_MONTH 0x05 |
| #define RV3028_YEAR 0x06 |
| #define RV3028_ALARM_MIN 0x07 |
| #define RV3028_ALARM_HOUR 0x08 |
| #define RV3028_ALARM_DAY 0x09 |
| #define RV3028_STATUS 0x0E |
| #define RV3028_CTRL1 0x0F |
| #define RV3028_CTRL2 0x10 |
| #define RV3028_EVT_CTRL 0x13 |
| #define RV3028_TS_COUNT 0x14 |
| #define RV3028_TS_SEC 0x15 |
| #define RV3028_RAM1 0x1F |
| #define RV3028_EEPROM_ADDR 0x25 |
| #define RV3028_EEPROM_DATA 0x26 |
| #define RV3028_EEPROM_CMD 0x27 |
| #define RV3028_CLKOUT 0x35 |
| #define RV3028_OFFSET 0x36 |
| #define RV3028_BACKUP 0x37 |
| |
| #define RV3028_STATUS_PORF BIT(0) |
| #define RV3028_STATUS_EVF BIT(1) |
| #define RV3028_STATUS_AF BIT(2) |
| #define RV3028_STATUS_TF BIT(3) |
| #define RV3028_STATUS_UF BIT(4) |
| #define RV3028_STATUS_BSF BIT(5) |
| #define RV3028_STATUS_CLKF BIT(6) |
| #define RV3028_STATUS_EEBUSY BIT(7) |
| |
| #define RV3028_CLKOUT_FD_MASK GENMASK(2, 0) |
| #define RV3028_CLKOUT_PORIE BIT(3) |
| #define RV3028_CLKOUT_CLKSY BIT(6) |
| #define RV3028_CLKOUT_CLKOE BIT(7) |
| |
| #define RV3028_CTRL1_EERD BIT(3) |
| #define RV3028_CTRL1_WADA BIT(5) |
| |
| #define RV3028_CTRL2_RESET BIT(0) |
| #define RV3028_CTRL2_12_24 BIT(1) |
| #define RV3028_CTRL2_EIE BIT(2) |
| #define RV3028_CTRL2_AIE BIT(3) |
| #define RV3028_CTRL2_TIE BIT(4) |
| #define RV3028_CTRL2_UIE BIT(5) |
| #define RV3028_CTRL2_TSE BIT(7) |
| |
| #define RV3028_EVT_CTRL_TSR BIT(2) |
| |
| #define RV3028_EEPROM_CMD_UPDATE 0x11 |
| #define RV3028_EEPROM_CMD_WRITE 0x21 |
| #define RV3028_EEPROM_CMD_READ 0x22 |
| |
| #define RV3028_EEBUSY_POLL 10000 |
| #define RV3028_EEBUSY_TIMEOUT 100000 |
| |
| #define RV3028_BACKUP_TCE BIT(5) |
| #define RV3028_BACKUP_TCR_MASK GENMASK(1,0) |
| #define RV3028_BACKUP_BSM GENMASK(3,2) |
| |
| #define RV3028_BACKUP_BSM_DSM 0x1 |
| #define RV3028_BACKUP_BSM_LSM 0x3 |
| |
| #define OFFSET_STEP_PPT 953674 |
| |
| enum rv3028_type { |
| rv_3028, |
| }; |
| |
| struct rv3028_data { |
| struct regmap *regmap; |
| struct rtc_device *rtc; |
| enum rv3028_type type; |
| #ifdef CONFIG_COMMON_CLK |
| struct clk_hw clkout_hw; |
| #endif |
| }; |
| |
| static u16 rv3028_trickle_resistors[] = {3000, 5000, 9000, 15000}; |
| |
| static ssize_t timestamp0_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent); |
| |
| regmap_update_bits(rv3028->regmap, RV3028_EVT_CTRL, RV3028_EVT_CTRL_TSR, |
| RV3028_EVT_CTRL_TSR); |
| |
| return count; |
| }; |
| |
| static ssize_t timestamp0_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent); |
| struct rtc_time tm; |
| int ret, count; |
| u8 date[6]; |
| |
| ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count); |
| if (ret) |
| return ret; |
| |
| if (!count) |
| return 0; |
| |
| ret = regmap_bulk_read(rv3028->regmap, RV3028_TS_SEC, date, |
| sizeof(date)); |
| if (ret) |
| return ret; |
| |
| tm.tm_sec = bcd2bin(date[0]); |
| tm.tm_min = bcd2bin(date[1]); |
| tm.tm_hour = bcd2bin(date[2]); |
| tm.tm_mday = bcd2bin(date[3]); |
| tm.tm_mon = bcd2bin(date[4]) - 1; |
| tm.tm_year = bcd2bin(date[5]) + 100; |
| |
| ret = rtc_valid_tm(&tm); |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%llu\n", |
| (unsigned long long)rtc_tm_to_time64(&tm)); |
| }; |
| |
| static DEVICE_ATTR_RW(timestamp0); |
| |
| static ssize_t timestamp0_count_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev->parent); |
| int ret, count; |
| |
| ret = regmap_read(rv3028->regmap, RV3028_TS_COUNT, &count); |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%u\n", count); |
| }; |
| |
| static DEVICE_ATTR_RO(timestamp0_count); |
| |
| static struct attribute *rv3028_attrs[] = { |
| &dev_attr_timestamp0.attr, |
| &dev_attr_timestamp0_count.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group rv3028_attr_group = { |
| .attrs = rv3028_attrs, |
| }; |
| |
| static int rv3028_exit_eerd(struct rv3028_data *rv3028, u32 eerd) |
| { |
| if (eerd) |
| return 0; |
| |
| return regmap_update_bits(rv3028->regmap, RV3028_CTRL1, RV3028_CTRL1_EERD, 0); |
| } |
| |
| static int rv3028_enter_eerd(struct rv3028_data *rv3028, u32 *eerd) |
| { |
| u32 ctrl1, status; |
| int ret; |
| |
| ret = regmap_read(rv3028->regmap, RV3028_CTRL1, &ctrl1); |
| if (ret) |
| return ret; |
| |
| *eerd = ctrl1 & RV3028_CTRL1_EERD; |
| if (*eerd) |
| return 0; |
| |
| ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL1, |
| RV3028_CTRL1_EERD, RV3028_CTRL1_EERD); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status, |
| !(status & RV3028_STATUS_EEBUSY), |
| RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT); |
| if (ret) { |
| rv3028_exit_eerd(rv3028, *eerd); |
| |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int rv3028_update_eeprom(struct rv3028_data *rv3028, u32 eerd) |
| { |
| u32 status; |
| int ret; |
| |
| ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0); |
| if (ret) |
| goto exit_eerd; |
| |
| ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, RV3028_EEPROM_CMD_UPDATE); |
| if (ret) |
| goto exit_eerd; |
| |
| usleep_range(63000, RV3028_EEBUSY_TIMEOUT); |
| |
| ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status, |
| !(status & RV3028_STATUS_EEBUSY), |
| RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT); |
| |
| exit_eerd: |
| rv3028_exit_eerd(rv3028, eerd); |
| |
| return ret; |
| } |
| |
| static int rv3028_update_cfg(struct rv3028_data *rv3028, unsigned int reg, |
| unsigned int mask, unsigned int val) |
| { |
| u32 eerd; |
| int ret; |
| |
| ret = rv3028_enter_eerd(rv3028, &eerd); |
| if (ret) |
| return ret; |
| |
| ret = regmap_update_bits(rv3028->regmap, reg, mask, val); |
| if (ret) { |
| rv3028_exit_eerd(rv3028, eerd); |
| return ret; |
| } |
| |
| return rv3028_update_eeprom(rv3028, eerd); |
| } |
| |
| static irqreturn_t rv3028_handle_irq(int irq, void *dev_id) |
| { |
| struct rv3028_data *rv3028 = dev_id; |
| unsigned long events = 0; |
| u32 status = 0, ctrl = 0; |
| |
| if (regmap_read(rv3028->regmap, RV3028_STATUS, &status) < 0 || |
| status == 0) { |
| return IRQ_NONE; |
| } |
| |
| status &= ~RV3028_STATUS_PORF; |
| |
| if (status & RV3028_STATUS_TF) { |
| status |= RV3028_STATUS_TF; |
| ctrl |= RV3028_CTRL2_TIE; |
| events |= RTC_PF; |
| } |
| |
| if (status & RV3028_STATUS_AF) { |
| status |= RV3028_STATUS_AF; |
| ctrl |= RV3028_CTRL2_AIE; |
| events |= RTC_AF; |
| } |
| |
| if (status & RV3028_STATUS_UF) { |
| status |= RV3028_STATUS_UF; |
| ctrl |= RV3028_CTRL2_UIE; |
| events |= RTC_UF; |
| } |
| |
| if (events) { |
| rtc_update_irq(rv3028->rtc, 1, events); |
| regmap_update_bits(rv3028->regmap, RV3028_STATUS, status, 0); |
| regmap_update_bits(rv3028->regmap, RV3028_CTRL2, ctrl, 0); |
| } |
| |
| if (status & RV3028_STATUS_EVF) { |
| sysfs_notify(&rv3028->rtc->dev.kobj, NULL, |
| dev_attr_timestamp0.attr.name); |
| dev_warn(&rv3028->rtc->dev, "event detected"); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int rv3028_get_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev); |
| u8 date[7]; |
| int ret, status; |
| |
| ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status); |
| if (ret < 0) |
| return ret; |
| |
| if (status & RV3028_STATUS_PORF) |
| return -EINVAL; |
| |
| ret = regmap_bulk_read(rv3028->regmap, RV3028_SEC, date, sizeof(date)); |
| if (ret) |
| return ret; |
| |
| tm->tm_sec = bcd2bin(date[RV3028_SEC] & 0x7f); |
| tm->tm_min = bcd2bin(date[RV3028_MIN] & 0x7f); |
| tm->tm_hour = bcd2bin(date[RV3028_HOUR] & 0x3f); |
| tm->tm_wday = date[RV3028_WDAY] & 0x7f; |
| tm->tm_mday = bcd2bin(date[RV3028_DAY] & 0x3f); |
| tm->tm_mon = bcd2bin(date[RV3028_MONTH] & 0x1f) - 1; |
| tm->tm_year = bcd2bin(date[RV3028_YEAR]) + 100; |
| |
| return 0; |
| } |
| |
| static int rv3028_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev); |
| u8 date[7]; |
| int ret; |
| |
| date[RV3028_SEC] = bin2bcd(tm->tm_sec); |
| date[RV3028_MIN] = bin2bcd(tm->tm_min); |
| date[RV3028_HOUR] = bin2bcd(tm->tm_hour); |
| date[RV3028_WDAY] = tm->tm_wday; |
| date[RV3028_DAY] = bin2bcd(tm->tm_mday); |
| date[RV3028_MONTH] = bin2bcd(tm->tm_mon + 1); |
| date[RV3028_YEAR] = bin2bcd(tm->tm_year - 100); |
| |
| /* |
| * Writing to the Seconds register has the same effect as setting RESET |
| * bit to 1 |
| */ |
| ret = regmap_bulk_write(rv3028->regmap, RV3028_SEC, date, |
| sizeof(date)); |
| if (ret) |
| return ret; |
| |
| ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, |
| RV3028_STATUS_PORF, 0); |
| |
| return ret; |
| } |
| |
| static int rv3028_get_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev); |
| u8 alarmvals[3]; |
| int status, ctrl, ret; |
| |
| ret = regmap_bulk_read(rv3028->regmap, RV3028_ALARM_MIN, alarmvals, |
| sizeof(alarmvals)); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_read(rv3028->regmap, RV3028_CTRL2, &ctrl); |
| if (ret < 0) |
| return ret; |
| |
| alrm->time.tm_sec = 0; |
| alrm->time.tm_min = bcd2bin(alarmvals[0] & 0x7f); |
| alrm->time.tm_hour = bcd2bin(alarmvals[1] & 0x3f); |
| alrm->time.tm_mday = bcd2bin(alarmvals[2] & 0x3f); |
| |
| alrm->enabled = !!(ctrl & RV3028_CTRL2_AIE); |
| alrm->pending = (status & RV3028_STATUS_AF) && alrm->enabled; |
| |
| return 0; |
| } |
| |
| static int rv3028_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev); |
| u8 alarmvals[3]; |
| u8 ctrl = 0; |
| int ret; |
| |
| /* The alarm has no seconds, round up to nearest minute */ |
| if (alrm->time.tm_sec) { |
| time64_t alarm_time = rtc_tm_to_time64(&alrm->time); |
| |
| alarm_time += 60 - alrm->time.tm_sec; |
| rtc_time64_to_tm(alarm_time, &alrm->time); |
| } |
| |
| ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2, |
| RV3028_CTRL2_AIE | RV3028_CTRL2_UIE, 0); |
| if (ret) |
| return ret; |
| |
| alarmvals[0] = bin2bcd(alrm->time.tm_min); |
| alarmvals[1] = bin2bcd(alrm->time.tm_hour); |
| alarmvals[2] = bin2bcd(alrm->time.tm_mday); |
| |
| ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, |
| RV3028_STATUS_AF, 0); |
| if (ret) |
| return ret; |
| |
| ret = regmap_bulk_write(rv3028->regmap, RV3028_ALARM_MIN, alarmvals, |
| sizeof(alarmvals)); |
| if (ret) |
| return ret; |
| |
| if (alrm->enabled) { |
| if (rv3028->rtc->uie_rtctimer.enabled) |
| ctrl |= RV3028_CTRL2_UIE; |
| if (rv3028->rtc->aie_timer.enabled) |
| ctrl |= RV3028_CTRL2_AIE; |
| } |
| |
| ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2, |
| RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl); |
| |
| return ret; |
| } |
| |
| static int rv3028_alarm_irq_enable(struct device *dev, unsigned int enabled) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev); |
| int ctrl = 0, ret; |
| |
| if (enabled) { |
| if (rv3028->rtc->uie_rtctimer.enabled) |
| ctrl |= RV3028_CTRL2_UIE; |
| if (rv3028->rtc->aie_timer.enabled) |
| ctrl |= RV3028_CTRL2_AIE; |
| } |
| |
| ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, |
| RV3028_STATUS_AF | RV3028_STATUS_UF, 0); |
| if (ret) |
| return ret; |
| |
| ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2, |
| RV3028_CTRL2_UIE | RV3028_CTRL2_AIE, ctrl); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int rv3028_read_offset(struct device *dev, long *offset) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev); |
| int ret, value, steps; |
| |
| ret = regmap_read(rv3028->regmap, RV3028_OFFSET, &value); |
| if (ret < 0) |
| return ret; |
| |
| steps = sign_extend32(value << 1, 8); |
| |
| ret = regmap_read(rv3028->regmap, RV3028_BACKUP, &value); |
| if (ret < 0) |
| return ret; |
| |
| steps += value >> 7; |
| |
| *offset = DIV_ROUND_CLOSEST(steps * OFFSET_STEP_PPT, 1000); |
| |
| return 0; |
| } |
| |
| static int rv3028_set_offset(struct device *dev, long offset) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev); |
| u32 eerd; |
| int ret; |
| |
| offset = clamp(offset, -244141L, 243187L) * 1000; |
| offset = DIV_ROUND_CLOSEST(offset, OFFSET_STEP_PPT); |
| |
| ret = rv3028_enter_eerd(rv3028, &eerd); |
| if (ret) |
| return ret; |
| |
| ret = regmap_write(rv3028->regmap, RV3028_OFFSET, offset >> 1); |
| if (ret < 0) |
| goto exit_eerd; |
| |
| ret = regmap_update_bits(rv3028->regmap, RV3028_BACKUP, BIT(7), |
| offset << 7); |
| if (ret < 0) |
| goto exit_eerd; |
| |
| return rv3028_update_eeprom(rv3028, eerd); |
| |
| exit_eerd: |
| rv3028_exit_eerd(rv3028, eerd); |
| |
| return ret; |
| |
| } |
| |
| static int rv3028_param_get(struct device *dev, struct rtc_param *param) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev); |
| int ret; |
| u32 value; |
| |
| switch(param->param) { |
| case RTC_PARAM_BACKUP_SWITCH_MODE: |
| ret = regmap_read(rv3028->regmap, RV3028_BACKUP, &value); |
| if (ret < 0) |
| return ret; |
| |
| value = FIELD_GET(RV3028_BACKUP_BSM, value); |
| |
| switch(value) { |
| case RV3028_BACKUP_BSM_DSM: |
| param->uvalue = RTC_BSM_DIRECT; |
| break; |
| case RV3028_BACKUP_BSM_LSM: |
| param->uvalue = RTC_BSM_LEVEL; |
| break; |
| default: |
| param->uvalue = RTC_BSM_DISABLED; |
| } |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int rv3028_param_set(struct device *dev, struct rtc_param *param) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev); |
| u8 mode; |
| |
| switch(param->param) { |
| case RTC_PARAM_BACKUP_SWITCH_MODE: |
| switch (param->uvalue) { |
| case RTC_BSM_DISABLED: |
| mode = 0; |
| break; |
| case RTC_BSM_DIRECT: |
| mode = RV3028_BACKUP_BSM_DSM; |
| break; |
| case RTC_BSM_LEVEL: |
| mode = RV3028_BACKUP_BSM_LSM; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return rv3028_update_cfg(rv3028, RV3028_BACKUP, RV3028_BACKUP_BSM, |
| FIELD_PREP(RV3028_BACKUP_BSM, mode)); |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int rv3028_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) |
| { |
| struct rv3028_data *rv3028 = dev_get_drvdata(dev); |
| int status, ret = 0; |
| |
| switch (cmd) { |
| case RTC_VL_READ: |
| ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status); |
| if (ret < 0) |
| return ret; |
| |
| status = status & RV3028_STATUS_PORF ? RTC_VL_DATA_INVALID : 0; |
| return put_user(status, (unsigned int __user *)arg); |
| |
| default: |
| return -ENOIOCTLCMD; |
| } |
| } |
| |
| static int rv3028_nvram_write(void *priv, unsigned int offset, void *val, |
| size_t bytes) |
| { |
| return regmap_bulk_write(priv, RV3028_RAM1 + offset, val, bytes); |
| } |
| |
| static int rv3028_nvram_read(void *priv, unsigned int offset, void *val, |
| size_t bytes) |
| { |
| return regmap_bulk_read(priv, RV3028_RAM1 + offset, val, bytes); |
| } |
| |
| static int rv3028_eeprom_write(void *priv, unsigned int offset, void *val, |
| size_t bytes) |
| { |
| struct rv3028_data *rv3028 = priv; |
| u32 status, eerd; |
| int i, ret; |
| u8 *buf = val; |
| |
| ret = rv3028_enter_eerd(rv3028, &eerd); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < bytes; i++) { |
| ret = regmap_write(rv3028->regmap, RV3028_EEPROM_ADDR, offset + i); |
| if (ret) |
| goto restore_eerd; |
| |
| ret = regmap_write(rv3028->regmap, RV3028_EEPROM_DATA, buf[i]); |
| if (ret) |
| goto restore_eerd; |
| |
| ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0); |
| if (ret) |
| goto restore_eerd; |
| |
| ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, |
| RV3028_EEPROM_CMD_WRITE); |
| if (ret) |
| goto restore_eerd; |
| |
| usleep_range(RV3028_EEBUSY_POLL, RV3028_EEBUSY_TIMEOUT); |
| |
| ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status, |
| !(status & RV3028_STATUS_EEBUSY), |
| RV3028_EEBUSY_POLL, |
| RV3028_EEBUSY_TIMEOUT); |
| if (ret) |
| goto restore_eerd; |
| } |
| |
| restore_eerd: |
| rv3028_exit_eerd(rv3028, eerd); |
| |
| return ret; |
| } |
| |
| static int rv3028_eeprom_read(void *priv, unsigned int offset, void *val, |
| size_t bytes) |
| { |
| struct rv3028_data *rv3028 = priv; |
| u32 status, eerd, data; |
| int i, ret; |
| u8 *buf = val; |
| |
| ret = rv3028_enter_eerd(rv3028, &eerd); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < bytes; i++) { |
| ret = regmap_write(rv3028->regmap, RV3028_EEPROM_ADDR, offset + i); |
| if (ret) |
| goto restore_eerd; |
| |
| ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, 0x0); |
| if (ret) |
| goto restore_eerd; |
| |
| ret = regmap_write(rv3028->regmap, RV3028_EEPROM_CMD, |
| RV3028_EEPROM_CMD_READ); |
| if (ret) |
| goto restore_eerd; |
| |
| ret = regmap_read_poll_timeout(rv3028->regmap, RV3028_STATUS, status, |
| !(status & RV3028_STATUS_EEBUSY), |
| RV3028_EEBUSY_POLL, |
| RV3028_EEBUSY_TIMEOUT); |
| if (ret) |
| goto restore_eerd; |
| |
| ret = regmap_read(rv3028->regmap, RV3028_EEPROM_DATA, &data); |
| if (ret) |
| goto restore_eerd; |
| buf[i] = data; |
| } |
| |
| restore_eerd: |
| rv3028_exit_eerd(rv3028, eerd); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_COMMON_CLK |
| #define clkout_hw_to_rv3028(hw) container_of(hw, struct rv3028_data, clkout_hw) |
| |
| static int clkout_rates[] = { |
| 32768, |
| 8192, |
| 1024, |
| 64, |
| 32, |
| 1, |
| }; |
| |
| static unsigned long rv3028_clkout_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| int clkout, ret; |
| struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw); |
| |
| ret = regmap_read(rv3028->regmap, RV3028_CLKOUT, &clkout); |
| if (ret < 0) |
| return 0; |
| |
| clkout &= RV3028_CLKOUT_FD_MASK; |
| return clkout_rates[clkout]; |
| } |
| |
| static long rv3028_clkout_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) |
| if (clkout_rates[i] <= rate) |
| return clkout_rates[i]; |
| |
| return 0; |
| } |
| |
| static int rv3028_clkout_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| int i, ret; |
| u32 enabled; |
| struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw); |
| |
| ret = regmap_read(rv3028->regmap, RV3028_CLKOUT, &enabled); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_write(rv3028->regmap, RV3028_CLKOUT, 0x0); |
| if (ret < 0) |
| return ret; |
| |
| enabled &= RV3028_CLKOUT_CLKOE; |
| |
| for (i = 0; i < ARRAY_SIZE(clkout_rates); i++) |
| if (clkout_rates[i] == rate) |
| return rv3028_update_cfg(rv3028, RV3028_CLKOUT, 0xff, |
| RV3028_CLKOUT_CLKSY | enabled | i); |
| |
| return -EINVAL; |
| } |
| |
| static int rv3028_clkout_prepare(struct clk_hw *hw) |
| { |
| struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw); |
| |
| return regmap_write(rv3028->regmap, RV3028_CLKOUT, |
| RV3028_CLKOUT_CLKSY | RV3028_CLKOUT_CLKOE); |
| } |
| |
| static void rv3028_clkout_unprepare(struct clk_hw *hw) |
| { |
| struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw); |
| |
| regmap_write(rv3028->regmap, RV3028_CLKOUT, 0x0); |
| regmap_update_bits(rv3028->regmap, RV3028_STATUS, |
| RV3028_STATUS_CLKF, 0); |
| } |
| |
| static int rv3028_clkout_is_prepared(struct clk_hw *hw) |
| { |
| int clkout, ret; |
| struct rv3028_data *rv3028 = clkout_hw_to_rv3028(hw); |
| |
| ret = regmap_read(rv3028->regmap, RV3028_CLKOUT, &clkout); |
| if (ret < 0) |
| return ret; |
| |
| return !!(clkout & RV3028_CLKOUT_CLKOE); |
| } |
| |
| static const struct clk_ops rv3028_clkout_ops = { |
| .prepare = rv3028_clkout_prepare, |
| .unprepare = rv3028_clkout_unprepare, |
| .is_prepared = rv3028_clkout_is_prepared, |
| .recalc_rate = rv3028_clkout_recalc_rate, |
| .round_rate = rv3028_clkout_round_rate, |
| .set_rate = rv3028_clkout_set_rate, |
| }; |
| |
| static int rv3028_clkout_register_clk(struct rv3028_data *rv3028, |
| struct i2c_client *client) |
| { |
| int ret; |
| struct clk *clk; |
| struct clk_init_data init; |
| struct device_node *node = client->dev.of_node; |
| |
| ret = regmap_update_bits(rv3028->regmap, RV3028_STATUS, |
| RV3028_STATUS_CLKF, 0); |
| if (ret < 0) |
| return ret; |
| |
| init.name = "rv3028-clkout"; |
| init.ops = &rv3028_clkout_ops; |
| init.flags = 0; |
| init.parent_names = NULL; |
| init.num_parents = 0; |
| rv3028->clkout_hw.init = &init; |
| |
| /* optional override of the clockname */ |
| of_property_read_string(node, "clock-output-names", &init.name); |
| |
| /* register the clock */ |
| clk = devm_clk_register(&client->dev, &rv3028->clkout_hw); |
| if (!IS_ERR(clk)) |
| of_clk_add_provider(node, of_clk_src_simple_get, clk); |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct rtc_class_ops rv3028_rtc_ops = { |
| .read_time = rv3028_get_time, |
| .set_time = rv3028_set_time, |
| .read_alarm = rv3028_get_alarm, |
| .set_alarm = rv3028_set_alarm, |
| .alarm_irq_enable = rv3028_alarm_irq_enable, |
| .read_offset = rv3028_read_offset, |
| .set_offset = rv3028_set_offset, |
| .ioctl = rv3028_ioctl, |
| .param_get = rv3028_param_get, |
| .param_set = rv3028_param_set, |
| }; |
| |
| static const struct regmap_config regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0x37, |
| }; |
| |
| static int rv3028_probe(struct i2c_client *client) |
| { |
| struct rv3028_data *rv3028; |
| int ret, status; |
| u32 ohms; |
| struct nvmem_config nvmem_cfg = { |
| .name = "rv3028_nvram", |
| .word_size = 1, |
| .stride = 1, |
| .size = 2, |
| .type = NVMEM_TYPE_BATTERY_BACKED, |
| .reg_read = rv3028_nvram_read, |
| .reg_write = rv3028_nvram_write, |
| }; |
| struct nvmem_config eeprom_cfg = { |
| .name = "rv3028_eeprom", |
| .word_size = 1, |
| .stride = 1, |
| .size = 43, |
| .type = NVMEM_TYPE_EEPROM, |
| .reg_read = rv3028_eeprom_read, |
| .reg_write = rv3028_eeprom_write, |
| }; |
| |
| rv3028 = devm_kzalloc(&client->dev, sizeof(struct rv3028_data), |
| GFP_KERNEL); |
| if (!rv3028) |
| return -ENOMEM; |
| |
| rv3028->regmap = devm_regmap_init_i2c(client, ®map_config); |
| if (IS_ERR(rv3028->regmap)) |
| return PTR_ERR(rv3028->regmap); |
| |
| i2c_set_clientdata(client, rv3028); |
| |
| ret = regmap_read(rv3028->regmap, RV3028_STATUS, &status); |
| if (ret < 0) |
| return ret; |
| |
| if (status & RV3028_STATUS_AF) |
| dev_warn(&client->dev, "An alarm may have been missed.\n"); |
| |
| rv3028->rtc = devm_rtc_allocate_device(&client->dev); |
| if (IS_ERR(rv3028->rtc)) |
| return PTR_ERR(rv3028->rtc); |
| |
| if (client->irq > 0) { |
| ret = devm_request_threaded_irq(&client->dev, client->irq, |
| NULL, rv3028_handle_irq, |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, |
| "rv3028", rv3028); |
| if (ret) { |
| dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n"); |
| client->irq = 0; |
| } |
| } |
| if (!client->irq) |
| clear_bit(RTC_FEATURE_ALARM, rv3028->rtc->features); |
| |
| ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL1, |
| RV3028_CTRL1_WADA, RV3028_CTRL1_WADA); |
| if (ret) |
| return ret; |
| |
| /* setup timestamping */ |
| ret = regmap_update_bits(rv3028->regmap, RV3028_CTRL2, |
| RV3028_CTRL2_EIE | RV3028_CTRL2_TSE, |
| RV3028_CTRL2_EIE | RV3028_CTRL2_TSE); |
| if (ret) |
| return ret; |
| |
| /* setup trickle charger */ |
| if (!device_property_read_u32(&client->dev, "trickle-resistor-ohms", |
| &ohms)) { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(rv3028_trickle_resistors); i++) |
| if (ohms == rv3028_trickle_resistors[i]) |
| break; |
| |
| if (i < ARRAY_SIZE(rv3028_trickle_resistors)) { |
| ret = rv3028_update_cfg(rv3028, RV3028_BACKUP, RV3028_BACKUP_TCE | |
| RV3028_BACKUP_TCR_MASK, RV3028_BACKUP_TCE | i); |
| if (ret) |
| return ret; |
| } else { |
| dev_warn(&client->dev, "invalid trickle resistor value\n"); |
| } |
| } |
| |
| ret = rtc_add_group(rv3028->rtc, &rv3028_attr_group); |
| if (ret) |
| return ret; |
| |
| set_bit(RTC_FEATURE_BACKUP_SWITCH_MODE, rv3028->rtc->features); |
| |
| rv3028->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; |
| rv3028->rtc->range_max = RTC_TIMESTAMP_END_2099; |
| rv3028->rtc->ops = &rv3028_rtc_ops; |
| ret = devm_rtc_register_device(rv3028->rtc); |
| if (ret) |
| return ret; |
| |
| nvmem_cfg.priv = rv3028->regmap; |
| devm_rtc_nvmem_register(rv3028->rtc, &nvmem_cfg); |
| eeprom_cfg.priv = rv3028; |
| devm_rtc_nvmem_register(rv3028->rtc, &eeprom_cfg); |
| |
| rv3028->rtc->max_user_freq = 1; |
| |
| #ifdef CONFIG_COMMON_CLK |
| rv3028_clkout_register_clk(rv3028, client); |
| #endif |
| return 0; |
| } |
| |
| static const __maybe_unused struct of_device_id rv3028_of_match[] = { |
| { .compatible = "microcrystal,rv3028", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, rv3028_of_match); |
| |
| static struct i2c_driver rv3028_driver = { |
| .driver = { |
| .name = "rtc-rv3028", |
| .of_match_table = of_match_ptr(rv3028_of_match), |
| }, |
| .probe_new = rv3028_probe, |
| }; |
| module_i2c_driver(rv3028_driver); |
| |
| MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>"); |
| MODULE_DESCRIPTION("Micro Crystal RV3028 RTC driver"); |
| MODULE_LICENSE("GPL v2"); |