| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ACRN_HSM: Handle I/O requests |
| * |
| * Copyright (C) 2020 Intel Corporation. All rights reserved. |
| * |
| * Authors: |
| * Jason Chen CJ <jason.cj.chen@intel.com> |
| * Fengwei Yin <fengwei.yin@intel.com> |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/kthread.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| |
| #include <asm/acrn.h> |
| |
| #include "acrn_drv.h" |
| |
| static void ioreq_pause(void); |
| static void ioreq_resume(void); |
| |
| static void ioreq_dispatcher(struct work_struct *work); |
| static struct workqueue_struct *ioreq_wq; |
| static DECLARE_WORK(ioreq_work, ioreq_dispatcher); |
| |
| static inline bool has_pending_request(struct acrn_ioreq_client *client) |
| { |
| return !bitmap_empty(client->ioreqs_map, ACRN_IO_REQUEST_MAX); |
| } |
| |
| static inline bool is_destroying(struct acrn_ioreq_client *client) |
| { |
| return test_bit(ACRN_IOREQ_CLIENT_DESTROYING, &client->flags); |
| } |
| |
| static int ioreq_complete_request(struct acrn_vm *vm, u16 vcpu, |
| struct acrn_io_request *acrn_req) |
| { |
| bool polling_mode; |
| int ret = 0; |
| |
| polling_mode = acrn_req->completion_polling; |
| /* Add barrier() to make sure the writes are done before completion */ |
| smp_store_release(&acrn_req->processed, ACRN_IOREQ_STATE_COMPLETE); |
| |
| /* |
| * To fulfill the requirement of real-time in several industry |
| * scenarios, like automotive, ACRN can run under the partition mode, |
| * in which User VMs and Service VM are bound to dedicated CPU cores. |
| * Polling mode of handling the I/O request is introduced to achieve a |
| * faster I/O request handling. In polling mode, the hypervisor polls |
| * I/O request's completion. Once an I/O request is marked as |
| * ACRN_IOREQ_STATE_COMPLETE, hypervisor resumes from the polling point |
| * to continue the I/O request flow. Thus, the completion notification |
| * from HSM of I/O request is not needed. Please note, |
| * completion_polling needs to be read before the I/O request being |
| * marked as ACRN_IOREQ_STATE_COMPLETE to avoid racing with the |
| * hypervisor. |
| */ |
| if (!polling_mode) { |
| ret = hcall_notify_req_finish(vm->vmid, vcpu); |
| if (ret < 0) |
| dev_err(acrn_dev.this_device, |
| "Notify I/O request finished failed!\n"); |
| } |
| |
| return ret; |
| } |
| |
| static int acrn_ioreq_complete_request(struct acrn_ioreq_client *client, |
| u16 vcpu, |
| struct acrn_io_request *acrn_req) |
| { |
| int ret; |
| |
| if (vcpu >= client->vm->vcpu_num) |
| return -EINVAL; |
| |
| clear_bit(vcpu, client->ioreqs_map); |
| if (!acrn_req) { |
| acrn_req = (struct acrn_io_request *)client->vm->ioreq_buf; |
| acrn_req += vcpu; |
| } |
| |
| ret = ioreq_complete_request(client->vm, vcpu, acrn_req); |
| |
| return ret; |
| } |
| |
| int acrn_ioreq_request_default_complete(struct acrn_vm *vm, u16 vcpu) |
| { |
| int ret = 0; |
| |
| spin_lock_bh(&vm->ioreq_clients_lock); |
| if (vm->default_client) |
| ret = acrn_ioreq_complete_request(vm->default_client, |
| vcpu, NULL); |
| spin_unlock_bh(&vm->ioreq_clients_lock); |
| |
| return ret; |
| } |
| |
| /** |
| * acrn_ioreq_range_add() - Add an iorange monitored by an ioreq client |
| * @client: The ioreq client |
| * @type: Type (ACRN_IOREQ_TYPE_MMIO or ACRN_IOREQ_TYPE_PORTIO) |
| * @start: Start address of iorange |
| * @end: End address of iorange |
| * |
| * Return: 0 on success, <0 on error |
| */ |
| int acrn_ioreq_range_add(struct acrn_ioreq_client *client, |
| u32 type, u64 start, u64 end) |
| { |
| struct acrn_ioreq_range *range; |
| |
| if (end < start) { |
| dev_err(acrn_dev.this_device, |
| "Invalid IO range [0x%llx,0x%llx]\n", start, end); |
| return -EINVAL; |
| } |
| |
| range = kzalloc(sizeof(*range), GFP_KERNEL); |
| if (!range) |
| return -ENOMEM; |
| |
| range->type = type; |
| range->start = start; |
| range->end = end; |
| |
| write_lock_bh(&client->range_lock); |
| list_add(&range->list, &client->range_list); |
| write_unlock_bh(&client->range_lock); |
| |
| return 0; |
| } |
| |
| /** |
| * acrn_ioreq_range_del() - Del an iorange monitored by an ioreq client |
| * @client: The ioreq client |
| * @type: Type (ACRN_IOREQ_TYPE_MMIO or ACRN_IOREQ_TYPE_PORTIO) |
| * @start: Start address of iorange |
| * @end: End address of iorange |
| */ |
| void acrn_ioreq_range_del(struct acrn_ioreq_client *client, |
| u32 type, u64 start, u64 end) |
| { |
| struct acrn_ioreq_range *range; |
| |
| write_lock_bh(&client->range_lock); |
| list_for_each_entry(range, &client->range_list, list) { |
| if (type == range->type && |
| start == range->start && |
| end == range->end) { |
| list_del(&range->list); |
| kfree(range); |
| break; |
| } |
| } |
| write_unlock_bh(&client->range_lock); |
| } |
| |
| /* |
| * ioreq_task() is the execution entity of handler thread of an I/O client. |
| * The handler callback of the I/O client is called within the handler thread. |
| */ |
| static int ioreq_task(void *data) |
| { |
| struct acrn_ioreq_client *client = data; |
| struct acrn_io_request *req; |
| unsigned long *ioreqs_map; |
| int vcpu, ret; |
| |
| /* |
| * Lockless access to ioreqs_map is safe, because |
| * 1) set_bit() and clear_bit() are atomic operations. |
| * 2) I/O requests arrives serialized. The access flow of ioreqs_map is: |
| * set_bit() - in ioreq_work handler |
| * Handler callback handles corresponding I/O request |
| * clear_bit() - in handler thread (include ACRN userspace) |
| * Mark corresponding I/O request completed |
| * Loop again if a new I/O request occurs |
| */ |
| ioreqs_map = client->ioreqs_map; |
| while (!kthread_should_stop()) { |
| acrn_ioreq_client_wait(client); |
| while (has_pending_request(client)) { |
| vcpu = find_first_bit(ioreqs_map, client->vm->vcpu_num); |
| req = client->vm->ioreq_buf->req_slot + vcpu; |
| ret = client->handler(client, req); |
| if (ret < 0) { |
| dev_err(acrn_dev.this_device, |
| "IO handle failure: %d\n", ret); |
| break; |
| } |
| acrn_ioreq_complete_request(client, vcpu, req); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * For the non-default I/O clients, give them chance to complete the current |
| * I/O requests if there are any. For the default I/O client, it is safe to |
| * clear all pending I/O requests because the clearing request is from ACRN |
| * userspace. |
| */ |
| void acrn_ioreq_request_clear(struct acrn_vm *vm) |
| { |
| struct acrn_ioreq_client *client; |
| bool has_pending = false; |
| unsigned long vcpu; |
| int retry = 10; |
| |
| /* |
| * IO requests of this VM will be completed directly in |
| * acrn_ioreq_dispatch if ACRN_VM_FLAG_CLEARING_IOREQ flag is set. |
| */ |
| set_bit(ACRN_VM_FLAG_CLEARING_IOREQ, &vm->flags); |
| |
| /* |
| * acrn_ioreq_request_clear is only called in VM reset case. Simply |
| * wait 100ms in total for the IO requests' completion. |
| */ |
| do { |
| spin_lock_bh(&vm->ioreq_clients_lock); |
| list_for_each_entry(client, &vm->ioreq_clients, list) { |
| has_pending = has_pending_request(client); |
| if (has_pending) |
| break; |
| } |
| spin_unlock_bh(&vm->ioreq_clients_lock); |
| |
| if (has_pending) |
| schedule_timeout_interruptible(HZ / 100); |
| } while (has_pending && --retry > 0); |
| if (retry == 0) |
| dev_warn(acrn_dev.this_device, |
| "%s cannot flush pending request!\n", client->name); |
| |
| /* Clear all ioreqs belonging to the default client */ |
| spin_lock_bh(&vm->ioreq_clients_lock); |
| client = vm->default_client; |
| if (client) { |
| for_each_set_bit(vcpu, client->ioreqs_map, ACRN_IO_REQUEST_MAX) |
| acrn_ioreq_complete_request(client, vcpu, NULL); |
| } |
| spin_unlock_bh(&vm->ioreq_clients_lock); |
| |
| /* Clear ACRN_VM_FLAG_CLEARING_IOREQ flag after the clearing */ |
| clear_bit(ACRN_VM_FLAG_CLEARING_IOREQ, &vm->flags); |
| } |
| |
| int acrn_ioreq_client_wait(struct acrn_ioreq_client *client) |
| { |
| if (client->is_default) { |
| /* |
| * In the default client, a user space thread waits on the |
| * waitqueue. The is_destroying() check is used to notify user |
| * space the client is going to be destroyed. |
| */ |
| wait_event_interruptible(client->wq, |
| has_pending_request(client) || |
| is_destroying(client)); |
| if (is_destroying(client)) |
| return -ENODEV; |
| } else { |
| wait_event_interruptible(client->wq, |
| has_pending_request(client) || |
| kthread_should_stop()); |
| } |
| |
| return 0; |
| } |
| |
| static bool is_cfg_addr(struct acrn_io_request *req) |
| { |
| return ((req->type == ACRN_IOREQ_TYPE_PORTIO) && |
| (req->reqs.pio_request.address == 0xcf8)); |
| } |
| |
| static bool is_cfg_data(struct acrn_io_request *req) |
| { |
| return ((req->type == ACRN_IOREQ_TYPE_PORTIO) && |
| ((req->reqs.pio_request.address >= 0xcfc) && |
| (req->reqs.pio_request.address < (0xcfc + 4)))); |
| } |
| |
| /* The low 8-bit of supported pci_reg addr.*/ |
| #define PCI_LOWREG_MASK 0xFC |
| /* The high 4-bit of supported pci_reg addr */ |
| #define PCI_HIGHREG_MASK 0xF00 |
| /* Max number of supported functions */ |
| #define PCI_FUNCMAX 7 |
| /* Max number of supported slots */ |
| #define PCI_SLOTMAX 31 |
| /* Max number of supported buses */ |
| #define PCI_BUSMAX 255 |
| #define CONF1_ENABLE 0x80000000UL |
| /* |
| * A PCI configuration space access via PIO 0xCF8 and 0xCFC normally has two |
| * following steps: |
| * 1) writes address into 0xCF8 port |
| * 2) accesses data in/from 0xCFC |
| * This function combines such paired PCI configuration space I/O requests into |
| * one ACRN_IOREQ_TYPE_PCICFG type I/O request and continues the processing. |
| */ |
| static bool handle_cf8cfc(struct acrn_vm *vm, |
| struct acrn_io_request *req, u16 vcpu) |
| { |
| int offset, pci_cfg_addr, pci_reg; |
| bool is_handled = false; |
| |
| if (is_cfg_addr(req)) { |
| WARN_ON(req->reqs.pio_request.size != 4); |
| if (req->reqs.pio_request.direction == ACRN_IOREQ_DIR_WRITE) |
| vm->pci_conf_addr = req->reqs.pio_request.value; |
| else |
| req->reqs.pio_request.value = vm->pci_conf_addr; |
| is_handled = true; |
| } else if (is_cfg_data(req)) { |
| if (!(vm->pci_conf_addr & CONF1_ENABLE)) { |
| if (req->reqs.pio_request.direction == |
| ACRN_IOREQ_DIR_READ) |
| req->reqs.pio_request.value = 0xffffffff; |
| is_handled = true; |
| } else { |
| offset = req->reqs.pio_request.address - 0xcfc; |
| |
| req->type = ACRN_IOREQ_TYPE_PCICFG; |
| pci_cfg_addr = vm->pci_conf_addr; |
| req->reqs.pci_request.bus = |
| (pci_cfg_addr >> 16) & PCI_BUSMAX; |
| req->reqs.pci_request.dev = |
| (pci_cfg_addr >> 11) & PCI_SLOTMAX; |
| req->reqs.pci_request.func = |
| (pci_cfg_addr >> 8) & PCI_FUNCMAX; |
| pci_reg = (pci_cfg_addr & PCI_LOWREG_MASK) + |
| ((pci_cfg_addr >> 16) & PCI_HIGHREG_MASK); |
| req->reqs.pci_request.reg = pci_reg + offset; |
| } |
| } |
| |
| if (is_handled) |
| ioreq_complete_request(vm, vcpu, req); |
| |
| return is_handled; |
| } |
| |
| static bool in_range(struct acrn_ioreq_range *range, |
| struct acrn_io_request *req) |
| { |
| bool ret = false; |
| |
| if (range->type == req->type) { |
| switch (req->type) { |
| case ACRN_IOREQ_TYPE_MMIO: |
| if (req->reqs.mmio_request.address >= range->start && |
| (req->reqs.mmio_request.address + |
| req->reqs.mmio_request.size - 1) <= range->end) |
| ret = true; |
| break; |
| case ACRN_IOREQ_TYPE_PORTIO: |
| if (req->reqs.pio_request.address >= range->start && |
| (req->reqs.pio_request.address + |
| req->reqs.pio_request.size - 1) <= range->end) |
| ret = true; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static struct acrn_ioreq_client *find_ioreq_client(struct acrn_vm *vm, |
| struct acrn_io_request *req) |
| { |
| struct acrn_ioreq_client *client, *found = NULL; |
| struct acrn_ioreq_range *range; |
| |
| lockdep_assert_held(&vm->ioreq_clients_lock); |
| |
| list_for_each_entry(client, &vm->ioreq_clients, list) { |
| read_lock_bh(&client->range_lock); |
| list_for_each_entry(range, &client->range_list, list) { |
| if (in_range(range, req)) { |
| found = client; |
| break; |
| } |
| } |
| read_unlock_bh(&client->range_lock); |
| if (found) |
| break; |
| } |
| return found ? found : vm->default_client; |
| } |
| |
| /** |
| * acrn_ioreq_client_create() - Create an ioreq client |
| * @vm: The VM that this client belongs to |
| * @handler: The ioreq_handler of ioreq client acrn_hsm will create a kernel |
| * thread and call the handler to handle I/O requests. |
| * @priv: Private data for the handler |
| * @is_default: If it is the default client |
| * @name: The name of ioreq client |
| * |
| * Return: acrn_ioreq_client pointer on success, NULL on error |
| */ |
| struct acrn_ioreq_client *acrn_ioreq_client_create(struct acrn_vm *vm, |
| ioreq_handler_t handler, |
| void *priv, bool is_default, |
| const char *name) |
| { |
| struct acrn_ioreq_client *client; |
| |
| if (!handler && !is_default) { |
| dev_dbg(acrn_dev.this_device, |
| "Cannot create non-default client w/o handler!\n"); |
| return NULL; |
| } |
| client = kzalloc(sizeof(*client), GFP_KERNEL); |
| if (!client) |
| return NULL; |
| |
| client->handler = handler; |
| client->vm = vm; |
| client->priv = priv; |
| client->is_default = is_default; |
| if (name) |
| strncpy(client->name, name, sizeof(client->name) - 1); |
| rwlock_init(&client->range_lock); |
| INIT_LIST_HEAD(&client->range_list); |
| init_waitqueue_head(&client->wq); |
| |
| if (client->handler) { |
| client->thread = kthread_run(ioreq_task, client, "VM%u-%s", |
| client->vm->vmid, client->name); |
| if (IS_ERR(client->thread)) { |
| kfree(client); |
| return NULL; |
| } |
| } |
| |
| spin_lock_bh(&vm->ioreq_clients_lock); |
| if (is_default) |
| vm->default_client = client; |
| else |
| list_add(&client->list, &vm->ioreq_clients); |
| spin_unlock_bh(&vm->ioreq_clients_lock); |
| |
| dev_dbg(acrn_dev.this_device, "Created ioreq client %s.\n", name); |
| return client; |
| } |
| |
| /** |
| * acrn_ioreq_client_destroy() - Destroy an ioreq client |
| * @client: The ioreq client |
| */ |
| void acrn_ioreq_client_destroy(struct acrn_ioreq_client *client) |
| { |
| struct acrn_ioreq_range *range, *next; |
| struct acrn_vm *vm = client->vm; |
| |
| dev_dbg(acrn_dev.this_device, |
| "Destroy ioreq client %s.\n", client->name); |
| ioreq_pause(); |
| set_bit(ACRN_IOREQ_CLIENT_DESTROYING, &client->flags); |
| if (client->is_default) |
| wake_up_interruptible(&client->wq); |
| else |
| kthread_stop(client->thread); |
| |
| spin_lock_bh(&vm->ioreq_clients_lock); |
| if (client->is_default) |
| vm->default_client = NULL; |
| else |
| list_del(&client->list); |
| spin_unlock_bh(&vm->ioreq_clients_lock); |
| |
| write_lock_bh(&client->range_lock); |
| list_for_each_entry_safe(range, next, &client->range_list, list) { |
| list_del(&range->list); |
| kfree(range); |
| } |
| write_unlock_bh(&client->range_lock); |
| kfree(client); |
| |
| ioreq_resume(); |
| } |
| |
| static int acrn_ioreq_dispatch(struct acrn_vm *vm) |
| { |
| struct acrn_ioreq_client *client; |
| struct acrn_io_request *req; |
| int i; |
| |
| for (i = 0; i < vm->vcpu_num; i++) { |
| req = vm->ioreq_buf->req_slot + i; |
| |
| /* barrier the read of processed of acrn_io_request */ |
| if (smp_load_acquire(&req->processed) == |
| ACRN_IOREQ_STATE_PENDING) { |
| /* Complete the IO request directly in clearing stage */ |
| if (test_bit(ACRN_VM_FLAG_CLEARING_IOREQ, &vm->flags)) { |
| ioreq_complete_request(vm, i, req); |
| continue; |
| } |
| if (handle_cf8cfc(vm, req, i)) |
| continue; |
| |
| spin_lock_bh(&vm->ioreq_clients_lock); |
| client = find_ioreq_client(vm, req); |
| if (!client) { |
| dev_err(acrn_dev.this_device, |
| "Failed to find ioreq client!\n"); |
| spin_unlock_bh(&vm->ioreq_clients_lock); |
| return -EINVAL; |
| } |
| if (!client->is_default) |
| req->kernel_handled = 1; |
| else |
| req->kernel_handled = 0; |
| /* |
| * Add barrier() to make sure the writes are done |
| * before setting ACRN_IOREQ_STATE_PROCESSING |
| */ |
| smp_store_release(&req->processed, |
| ACRN_IOREQ_STATE_PROCESSING); |
| set_bit(i, client->ioreqs_map); |
| wake_up_interruptible(&client->wq); |
| spin_unlock_bh(&vm->ioreq_clients_lock); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void ioreq_dispatcher(struct work_struct *work) |
| { |
| struct acrn_vm *vm; |
| |
| read_lock(&acrn_vm_list_lock); |
| list_for_each_entry(vm, &acrn_vm_list, list) { |
| if (!vm->ioreq_buf) |
| break; |
| acrn_ioreq_dispatch(vm); |
| } |
| read_unlock(&acrn_vm_list_lock); |
| } |
| |
| static void ioreq_intr_handler(void) |
| { |
| queue_work(ioreq_wq, &ioreq_work); |
| } |
| |
| static void ioreq_pause(void) |
| { |
| /* Flush and unarm the handler to ensure no I/O requests pending */ |
| acrn_remove_intr_handler(); |
| drain_workqueue(ioreq_wq); |
| } |
| |
| static void ioreq_resume(void) |
| { |
| /* Schedule after enabling in case other clients miss interrupt */ |
| acrn_setup_intr_handler(ioreq_intr_handler); |
| queue_work(ioreq_wq, &ioreq_work); |
| } |
| |
| int acrn_ioreq_intr_setup(void) |
| { |
| acrn_setup_intr_handler(ioreq_intr_handler); |
| ioreq_wq = alloc_workqueue("ioreq_wq", |
| WQ_HIGHPRI | WQ_MEM_RECLAIM | WQ_UNBOUND, 1); |
| if (!ioreq_wq) { |
| dev_err(acrn_dev.this_device, "Failed to alloc workqueue!\n"); |
| acrn_remove_intr_handler(); |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| void acrn_ioreq_intr_remove(void) |
| { |
| if (ioreq_wq) |
| destroy_workqueue(ioreq_wq); |
| acrn_remove_intr_handler(); |
| } |
| |
| int acrn_ioreq_init(struct acrn_vm *vm, u64 buf_vma) |
| { |
| struct acrn_ioreq_buffer *set_buffer; |
| struct page *page; |
| int ret; |
| |
| if (vm->ioreq_buf) |
| return -EEXIST; |
| |
| set_buffer = kzalloc(sizeof(*set_buffer), GFP_KERNEL); |
| if (!set_buffer) |
| return -ENOMEM; |
| |
| ret = pin_user_pages_fast(buf_vma, 1, |
| FOLL_WRITE | FOLL_LONGTERM, &page); |
| if (unlikely(ret != 1) || !page) { |
| dev_err(acrn_dev.this_device, "Failed to pin ioreq page!\n"); |
| ret = -EFAULT; |
| goto free_buf; |
| } |
| |
| vm->ioreq_buf = page_address(page); |
| vm->ioreq_page = page; |
| set_buffer->ioreq_buf = page_to_phys(page); |
| ret = hcall_set_ioreq_buffer(vm->vmid, virt_to_phys(set_buffer)); |
| if (ret < 0) { |
| dev_err(acrn_dev.this_device, "Failed to init ioreq buffer!\n"); |
| unpin_user_page(page); |
| vm->ioreq_buf = NULL; |
| goto free_buf; |
| } |
| |
| dev_dbg(acrn_dev.this_device, |
| "Init ioreq buffer %pK!\n", vm->ioreq_buf); |
| ret = 0; |
| free_buf: |
| kfree(set_buffer); |
| return ret; |
| } |
| |
| void acrn_ioreq_deinit(struct acrn_vm *vm) |
| { |
| struct acrn_ioreq_client *client, *next; |
| |
| dev_dbg(acrn_dev.this_device, |
| "Deinit ioreq buffer %pK!\n", vm->ioreq_buf); |
| /* Destroy all clients belonging to this VM */ |
| list_for_each_entry_safe(client, next, &vm->ioreq_clients, list) |
| acrn_ioreq_client_destroy(client); |
| if (vm->default_client) |
| acrn_ioreq_client_destroy(vm->default_client); |
| |
| if (vm->ioreq_buf && vm->ioreq_page) { |
| unpin_user_page(vm->ioreq_page); |
| vm->ioreq_buf = NULL; |
| } |
| } |