| /* SPDX-License-Identifier: GPL-2.0 */ |
| #ifndef _ASM_GENERIC_BUG_H |
| #define _ASM_GENERIC_BUG_H |
| |
| #include <linux/compiler.h> |
| #include <linux/instrumentation.h> |
| #include <linux/once_lite.h> |
| |
| #define CUT_HERE "------------[ cut here ]------------\n" |
| |
| #ifdef CONFIG_GENERIC_BUG |
| #define BUGFLAG_WARNING (1 << 0) |
| #define BUGFLAG_ONCE (1 << 1) |
| #define BUGFLAG_DONE (1 << 2) |
| #define BUGFLAG_NO_CUT_HERE (1 << 3) /* CUT_HERE already sent */ |
| #define BUGFLAG_TAINT(taint) ((taint) << 8) |
| #define BUG_GET_TAINT(bug) ((bug)->flags >> 8) |
| #endif |
| |
| #ifndef __ASSEMBLY__ |
| #include <linux/panic.h> |
| #include <linux/printk.h> |
| |
| struct warn_args; |
| struct pt_regs; |
| |
| void __warn(const char *file, int line, void *caller, unsigned taint, |
| struct pt_regs *regs, struct warn_args *args); |
| |
| #ifdef CONFIG_BUG |
| |
| #ifdef CONFIG_GENERIC_BUG |
| struct bug_entry { |
| #ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS |
| unsigned long bug_addr; |
| #else |
| signed int bug_addr_disp; |
| #endif |
| #ifdef CONFIG_DEBUG_BUGVERBOSE |
| #ifndef CONFIG_GENERIC_BUG_RELATIVE_POINTERS |
| const char *file; |
| #else |
| signed int file_disp; |
| #endif |
| unsigned short line; |
| #endif |
| unsigned short flags; |
| }; |
| #endif /* CONFIG_GENERIC_BUG */ |
| |
| /* |
| * Don't use BUG() or BUG_ON() unless there's really no way out; one |
| * example might be detecting data structure corruption in the middle |
| * of an operation that can't be backed out of. If the (sub)system |
| * can somehow continue operating, perhaps with reduced functionality, |
| * it's probably not BUG-worthy. |
| * |
| * If you're tempted to BUG(), think again: is completely giving up |
| * really the *only* solution? There are usually better options, where |
| * users don't need to reboot ASAP and can mostly shut down cleanly. |
| */ |
| #ifndef HAVE_ARCH_BUG |
| #define BUG() do { \ |
| printk("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \ |
| barrier_before_unreachable(); \ |
| panic("BUG!"); \ |
| } while (0) |
| #endif |
| |
| #ifndef HAVE_ARCH_BUG_ON |
| #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) |
| #endif |
| |
| /* |
| * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report |
| * significant kernel issues that need prompt attention if they should ever |
| * appear at runtime. |
| * |
| * Do not use these macros when checking for invalid external inputs |
| * (e.g. invalid system call arguments, or invalid data coming from |
| * network/devices), and on transient conditions like ENOMEM or EAGAIN. |
| * These macros should be used for recoverable kernel issues only. |
| * For invalid external inputs, transient conditions, etc use |
| * pr_err[_once/_ratelimited]() followed by dump_stack(), if necessary. |
| * Do not include "BUG"/"WARNING" in format strings manually to make these |
| * conditions distinguishable from kernel issues. |
| * |
| * Use the versions with printk format strings to provide better diagnostics. |
| */ |
| #ifndef __WARN_FLAGS |
| extern __printf(4, 5) |
| void warn_slowpath_fmt(const char *file, const int line, unsigned taint, |
| const char *fmt, ...); |
| #define __WARN() __WARN_printf(TAINT_WARN, NULL) |
| #define __WARN_printf(taint, arg...) do { \ |
| instrumentation_begin(); \ |
| warn_slowpath_fmt(__FILE__, __LINE__, taint, arg); \ |
| instrumentation_end(); \ |
| } while (0) |
| #else |
| extern __printf(1, 2) void __warn_printk(const char *fmt, ...); |
| #define __WARN() __WARN_FLAGS(BUGFLAG_TAINT(TAINT_WARN)) |
| #define __WARN_printf(taint, arg...) do { \ |
| instrumentation_begin(); \ |
| __warn_printk(arg); \ |
| __WARN_FLAGS(BUGFLAG_NO_CUT_HERE | BUGFLAG_TAINT(taint));\ |
| instrumentation_end(); \ |
| } while (0) |
| #define WARN_ON_ONCE(condition) ({ \ |
| int __ret_warn_on = !!(condition); \ |
| if (unlikely(__ret_warn_on)) \ |
| __WARN_FLAGS(BUGFLAG_ONCE | \ |
| BUGFLAG_TAINT(TAINT_WARN)); \ |
| unlikely(__ret_warn_on); \ |
| }) |
| #endif |
| |
| /* used internally by panic.c */ |
| |
| #ifndef WARN_ON |
| #define WARN_ON(condition) ({ \ |
| int __ret_warn_on = !!(condition); \ |
| if (unlikely(__ret_warn_on)) \ |
| __WARN(); \ |
| unlikely(__ret_warn_on); \ |
| }) |
| #endif |
| |
| #ifndef WARN |
| #define WARN(condition, format...) ({ \ |
| int __ret_warn_on = !!(condition); \ |
| if (unlikely(__ret_warn_on)) \ |
| __WARN_printf(TAINT_WARN, format); \ |
| unlikely(__ret_warn_on); \ |
| }) |
| #endif |
| |
| #define WARN_TAINT(condition, taint, format...) ({ \ |
| int __ret_warn_on = !!(condition); \ |
| if (unlikely(__ret_warn_on)) \ |
| __WARN_printf(taint, format); \ |
| unlikely(__ret_warn_on); \ |
| }) |
| |
| #ifndef WARN_ON_ONCE |
| #define WARN_ON_ONCE(condition) \ |
| DO_ONCE_LITE_IF(condition, WARN_ON, 1) |
| #endif |
| |
| #define WARN_ONCE(condition, format...) \ |
| DO_ONCE_LITE_IF(condition, WARN, 1, format) |
| |
| #define WARN_TAINT_ONCE(condition, taint, format...) \ |
| DO_ONCE_LITE_IF(condition, WARN_TAINT, 1, taint, format) |
| |
| #else /* !CONFIG_BUG */ |
| #ifndef HAVE_ARCH_BUG |
| #define BUG() do {} while (1) |
| #endif |
| |
| #ifndef HAVE_ARCH_BUG_ON |
| #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) |
| #endif |
| |
| #ifndef HAVE_ARCH_WARN_ON |
| #define WARN_ON(condition) ({ \ |
| int __ret_warn_on = !!(condition); \ |
| unlikely(__ret_warn_on); \ |
| }) |
| #endif |
| |
| #ifndef WARN |
| #define WARN(condition, format...) ({ \ |
| int __ret_warn_on = !!(condition); \ |
| no_printk(format); \ |
| unlikely(__ret_warn_on); \ |
| }) |
| #endif |
| |
| #define WARN_ON_ONCE(condition) WARN_ON(condition) |
| #define WARN_ONCE(condition, format...) WARN(condition, format) |
| #define WARN_TAINT(condition, taint, format...) WARN(condition, format) |
| #define WARN_TAINT_ONCE(condition, taint, format...) WARN(condition, format) |
| |
| #endif |
| |
| /* |
| * WARN_ON_SMP() is for cases that the warning is either |
| * meaningless for !SMP or may even cause failures. |
| * It can also be used with values that are only defined |
| * on SMP: |
| * |
| * struct foo { |
| * [...] |
| * #ifdef CONFIG_SMP |
| * int bar; |
| * #endif |
| * }; |
| * |
| * void func(struct foo *zoot) |
| * { |
| * WARN_ON_SMP(!zoot->bar); |
| * |
| * For CONFIG_SMP, WARN_ON_SMP() should act the same as WARN_ON(), |
| * and should be a nop and return false for uniprocessor. |
| * |
| * if (WARN_ON_SMP(x)) returns true only when CONFIG_SMP is set |
| * and x is true. |
| */ |
| #ifdef CONFIG_SMP |
| # define WARN_ON_SMP(x) WARN_ON(x) |
| #else |
| /* |
| * Use of ({0;}) because WARN_ON_SMP(x) may be used either as |
| * a stand alone line statement or as a condition in an if () |
| * statement. |
| * A simple "0" would cause gcc to give a "statement has no effect" |
| * warning. |
| */ |
| # define WARN_ON_SMP(x) ({0;}) |
| #endif |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif |