| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * KVM guest debug register tests |
| * |
| * Copyright (C) 2020, Red Hat, Inc. |
| */ |
| #include <stdio.h> |
| #include <string.h> |
| #include "kvm_util.h" |
| #include "processor.h" |
| #include "apic.h" |
| |
| #define DR6_BD (1 << 13) |
| #define DR7_GD (1 << 13) |
| |
| #define IRQ_VECTOR 0xAA |
| |
| /* For testing data access debug BP */ |
| uint32_t guest_value; |
| |
| extern unsigned char sw_bp, hw_bp, write_data, ss_start, bd_start; |
| |
| static void guest_code(void) |
| { |
| /* Create a pending interrupt on current vCPU */ |
| x2apic_enable(); |
| x2apic_write_reg(APIC_ICR, APIC_DEST_SELF | APIC_INT_ASSERT | |
| APIC_DM_FIXED | IRQ_VECTOR); |
| |
| /* |
| * Software BP tests. |
| * |
| * NOTE: sw_bp need to be before the cmd here, because int3 is an |
| * exception rather than a normal trap for KVM_SET_GUEST_DEBUG (we |
| * capture it using the vcpu exception bitmap). |
| */ |
| asm volatile("sw_bp: int3"); |
| |
| /* Hardware instruction BP test */ |
| asm volatile("hw_bp: nop"); |
| |
| /* Hardware data BP test */ |
| asm volatile("mov $1234,%%rax;\n\t" |
| "mov %%rax,%0;\n\t write_data:" |
| : "=m" (guest_value) : : "rax"); |
| |
| /* |
| * Single step test, covers 2 basic instructions and 2 emulated |
| * |
| * Enable interrupts during the single stepping to see that |
| * pending interrupt we raised is not handled due to KVM_GUESTDBG_BLOCKIRQ |
| */ |
| asm volatile("ss_start: " |
| "sti\n\t" |
| "xor %%eax,%%eax\n\t" |
| "cpuid\n\t" |
| "movl $0x1a0,%%ecx\n\t" |
| "rdmsr\n\t" |
| "cli\n\t" |
| : : : "eax", "ebx", "ecx", "edx"); |
| |
| /* DR6.BD test */ |
| asm volatile("bd_start: mov %%dr0, %%rax" : : : "rax"); |
| GUEST_DONE(); |
| } |
| |
| #define CAST_TO_RIP(v) ((unsigned long long)&(v)) |
| |
| static void vcpu_skip_insn(struct kvm_vcpu *vcpu, int insn_len) |
| { |
| struct kvm_regs regs; |
| |
| vcpu_regs_get(vcpu, ®s); |
| regs.rip += insn_len; |
| vcpu_regs_set(vcpu, ®s); |
| } |
| |
| int main(void) |
| { |
| struct kvm_guest_debug debug; |
| unsigned long long target_dr6, target_rip; |
| struct kvm_vcpu *vcpu; |
| struct kvm_run *run; |
| struct kvm_vm *vm; |
| struct ucall uc; |
| uint64_t cmd; |
| int i; |
| /* Instruction lengths starting at ss_start */ |
| int ss_size[6] = { |
| 1, /* sti*/ |
| 2, /* xor */ |
| 2, /* cpuid */ |
| 5, /* mov */ |
| 2, /* rdmsr */ |
| 1, /* cli */ |
| }; |
| |
| TEST_REQUIRE(kvm_has_cap(KVM_CAP_SET_GUEST_DEBUG)); |
| |
| vm = vm_create_with_one_vcpu(&vcpu, guest_code); |
| run = vcpu->run; |
| |
| /* Test software BPs - int3 */ |
| memset(&debug, 0, sizeof(debug)); |
| debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP; |
| vcpu_guest_debug_set(vcpu, &debug); |
| vcpu_run(vcpu); |
| TEST_ASSERT(run->exit_reason == KVM_EXIT_DEBUG && |
| run->debug.arch.exception == BP_VECTOR && |
| run->debug.arch.pc == CAST_TO_RIP(sw_bp), |
| "INT3: exit %d exception %d rip 0x%llx (should be 0x%llx)", |
| run->exit_reason, run->debug.arch.exception, |
| run->debug.arch.pc, CAST_TO_RIP(sw_bp)); |
| vcpu_skip_insn(vcpu, 1); |
| |
| /* Test instruction HW BP over DR[0-3] */ |
| for (i = 0; i < 4; i++) { |
| memset(&debug, 0, sizeof(debug)); |
| debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW_BP; |
| debug.arch.debugreg[i] = CAST_TO_RIP(hw_bp); |
| debug.arch.debugreg[7] = 0x400 | (1UL << (2*i+1)); |
| vcpu_guest_debug_set(vcpu, &debug); |
| vcpu_run(vcpu); |
| target_dr6 = 0xffff0ff0 | (1UL << i); |
| TEST_ASSERT(run->exit_reason == KVM_EXIT_DEBUG && |
| run->debug.arch.exception == DB_VECTOR && |
| run->debug.arch.pc == CAST_TO_RIP(hw_bp) && |
| run->debug.arch.dr6 == target_dr6, |
| "INS_HW_BP (DR%d): exit %d exception %d rip 0x%llx " |
| "(should be 0x%llx) dr6 0x%llx (should be 0x%llx)", |
| i, run->exit_reason, run->debug.arch.exception, |
| run->debug.arch.pc, CAST_TO_RIP(hw_bp), |
| run->debug.arch.dr6, target_dr6); |
| } |
| /* Skip "nop" */ |
| vcpu_skip_insn(vcpu, 1); |
| |
| /* Test data access HW BP over DR[0-3] */ |
| for (i = 0; i < 4; i++) { |
| memset(&debug, 0, sizeof(debug)); |
| debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW_BP; |
| debug.arch.debugreg[i] = CAST_TO_RIP(guest_value); |
| debug.arch.debugreg[7] = 0x00000400 | (1UL << (2*i+1)) | |
| (0x000d0000UL << (4*i)); |
| vcpu_guest_debug_set(vcpu, &debug); |
| vcpu_run(vcpu); |
| target_dr6 = 0xffff0ff0 | (1UL << i); |
| TEST_ASSERT(run->exit_reason == KVM_EXIT_DEBUG && |
| run->debug.arch.exception == DB_VECTOR && |
| run->debug.arch.pc == CAST_TO_RIP(write_data) && |
| run->debug.arch.dr6 == target_dr6, |
| "DATA_HW_BP (DR%d): exit %d exception %d rip 0x%llx " |
| "(should be 0x%llx) dr6 0x%llx (should be 0x%llx)", |
| i, run->exit_reason, run->debug.arch.exception, |
| run->debug.arch.pc, CAST_TO_RIP(write_data), |
| run->debug.arch.dr6, target_dr6); |
| /* Rollback the 4-bytes "mov" */ |
| vcpu_skip_insn(vcpu, -7); |
| } |
| /* Skip the 4-bytes "mov" */ |
| vcpu_skip_insn(vcpu, 7); |
| |
| /* Test single step */ |
| target_rip = CAST_TO_RIP(ss_start); |
| target_dr6 = 0xffff4ff0ULL; |
| for (i = 0; i < (sizeof(ss_size) / sizeof(ss_size[0])); i++) { |
| target_rip += ss_size[i]; |
| memset(&debug, 0, sizeof(debug)); |
| debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_SINGLESTEP | |
| KVM_GUESTDBG_BLOCKIRQ; |
| debug.arch.debugreg[7] = 0x00000400; |
| vcpu_guest_debug_set(vcpu, &debug); |
| vcpu_run(vcpu); |
| TEST_ASSERT(run->exit_reason == KVM_EXIT_DEBUG && |
| run->debug.arch.exception == DB_VECTOR && |
| run->debug.arch.pc == target_rip && |
| run->debug.arch.dr6 == target_dr6, |
| "SINGLE_STEP[%d]: exit %d exception %d rip 0x%llx " |
| "(should be 0x%llx) dr6 0x%llx (should be 0x%llx)", |
| i, run->exit_reason, run->debug.arch.exception, |
| run->debug.arch.pc, target_rip, run->debug.arch.dr6, |
| target_dr6); |
| } |
| |
| /* Finally test global disable */ |
| memset(&debug, 0, sizeof(debug)); |
| debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW_BP; |
| debug.arch.debugreg[7] = 0x400 | DR7_GD; |
| vcpu_guest_debug_set(vcpu, &debug); |
| vcpu_run(vcpu); |
| target_dr6 = 0xffff0ff0 | DR6_BD; |
| TEST_ASSERT(run->exit_reason == KVM_EXIT_DEBUG && |
| run->debug.arch.exception == DB_VECTOR && |
| run->debug.arch.pc == CAST_TO_RIP(bd_start) && |
| run->debug.arch.dr6 == target_dr6, |
| "DR7.GD: exit %d exception %d rip 0x%llx " |
| "(should be 0x%llx) dr6 0x%llx (should be 0x%llx)", |
| run->exit_reason, run->debug.arch.exception, |
| run->debug.arch.pc, target_rip, run->debug.arch.dr6, |
| target_dr6); |
| |
| /* Disable all debug controls, run to the end */ |
| memset(&debug, 0, sizeof(debug)); |
| vcpu_guest_debug_set(vcpu, &debug); |
| |
| vcpu_run(vcpu); |
| TEST_ASSERT(run->exit_reason == KVM_EXIT_IO, "KVM_EXIT_IO"); |
| cmd = get_ucall(vcpu, &uc); |
| TEST_ASSERT(cmd == UCALL_DONE, "UCALL_DONE"); |
| |
| kvm_vm_free(vm); |
| |
| return 0; |
| } |