| Overview |
| ======== |
| |
| EROFS file-system stands for Enhanced Read-Only File System. Different |
| from other read-only file systems, it aims to be designed for flexibility, |
| scalability, but be kept simple and high performance. |
| |
| It is designed as a better filesystem solution for the following scenarios: |
| - read-only storage media or |
| |
| - part of a fully trusted read-only solution, which means it needs to be |
| immutable and bit-for-bit identical to the official golden image for |
| their releases due to security and other considerations and |
| |
| - hope to save some extra storage space with guaranteed end-to-end performance |
| by using reduced metadata and transparent file compression, especially |
| for those embedded devices with limited memory (ex, smartphone); |
| |
| Here is the main features of EROFS: |
| - Little endian on-disk design; |
| |
| - Currently 4KB block size (nobh) and therefore maximum 16TB address space; |
| |
| - Metadata & data could be mixed by design; |
| |
| - 2 inode versions for different requirements: |
| compact (v1) extended (v2) |
| Inode metadata size: 32 bytes 64 bytes |
| Max file size: 4 GB 16 EB (also limited by max. vol size) |
| Max uids/gids: 65536 4294967296 |
| File change time: no yes (64 + 32-bit timestamp) |
| Max hardlinks: 65536 4294967296 |
| Metadata reserved: 4 bytes 14 bytes |
| |
| - Support extended attributes (xattrs) as an option; |
| |
| - Support xattr inline and tail-end data inline for all files; |
| |
| - Support POSIX.1e ACLs by using xattrs; |
| |
| - Support transparent file compression as an option: |
| LZ4 algorithm with 4 KB fixed-sized output compression for high performance. |
| |
| The following git tree provides the file system user-space tools under |
| development (ex, formatting tool mkfs.erofs): |
| >> git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git |
| |
| Bugs and patches are welcome, please kindly help us and send to the following |
| linux-erofs mailing list: |
| >> linux-erofs mailing list <linux-erofs@lists.ozlabs.org> |
| |
| Mount options |
| ============= |
| |
| (no)user_xattr Setup Extended User Attributes. Note: xattr is enabled |
| by default if CONFIG_EROFS_FS_XATTR is selected. |
| (no)acl Setup POSIX Access Control List. Note: acl is enabled |
| by default if CONFIG_EROFS_FS_POSIX_ACL is selected. |
| cache_strategy=%s Select a strategy for cached decompression from now on: |
| disabled: In-place I/O decompression only; |
| readahead: Cache the last incomplete compressed physical |
| cluster for further reading. It still does |
| in-place I/O decompression for the rest |
| compressed physical clusters; |
| readaround: Cache the both ends of incomplete compressed |
| physical clusters for further reading. |
| It still does in-place I/O decompression |
| for the rest compressed physical clusters. |
| |
| On-disk details |
| =============== |
| |
| Summary |
| ------- |
| Different from other read-only file systems, an EROFS volume is designed |
| to be as simple as possible: |
| |
| |-> aligned with the block size |
| ____________________________________________________________ |
| | |SB| | ... | Metadata | ... | Data | Metadata | ... | Data | |
| |_|__|_|_____|__________|_____|______|__________|_____|______| |
| 0 +1K |
| |
| All data areas should be aligned with the block size, but metadata areas |
| may not. All metadatas can be now observed in two different spaces (views): |
| 1. Inode metadata space |
| Each valid inode should be aligned with an inode slot, which is a fixed |
| value (32 bytes) and designed to be kept in line with compact inode size. |
| |
| Each inode can be directly found with the following formula: |
| inode offset = meta_blkaddr * block_size + 32 * nid |
| |
| |-> aligned with 8B |
| |-> followed closely |
| + meta_blkaddr blocks |-> another slot |
| _____________________________________________________________________ |
| | ... | inode | xattrs | extents | data inline | ... | inode ... |
| |________|_______|(optional)|(optional)|__(optional)_|_____|__________ |
| |-> aligned with the inode slot size |
| . . |
| . . |
| . . |
| . . |
| . . |
| . . |
| .____________________________________________________|-> aligned with 4B |
| | xattr_ibody_header | shared xattrs | inline xattrs | |
| |____________________|_______________|_______________| |
| |-> 12 bytes <-|->x * 4 bytes<-| . |
| . . . |
| . . . |
| . . . |
| ._______________________________.______________________. |
| | id | id | id | id | ... | id | ent | ... | ent| ... | |
| |____|____|____|____|______|____|_____|_____|____|_____| |
| |-> aligned with 4B |
| |-> aligned with 4B |
| |
| Inode could be 32 or 64 bytes, which can be distinguished from a common |
| field which all inode versions have -- i_format: |
| |
| __________________ __________________ |
| | i_format | | i_format | |
| |__________________| |__________________| |
| | ... | | ... | |
| | | | | |
| |__________________| 32 bytes | | |
| | | |
| |__________________| 64 bytes |
| |
| Xattrs, extents, data inline are followed by the corresponding inode with |
| proper alignment, and they could be optional for different data mappings. |
| _currently_ total 4 valid data mappings are supported: |
| |
| 0 flat file data without data inline (no extent); |
| 1 fixed-sized output data compression (with non-compacted indexes); |
| 2 flat file data with tail packing data inline (no extent); |
| 3 fixed-sized output data compression (with compacted indexes, v5.3+). |
| |
| The size of the optional xattrs is indicated by i_xattr_count in inode |
| header. Large xattrs or xattrs shared by many different files can be |
| stored in shared xattrs metadata rather than inlined right after inode. |
| |
| 2. Shared xattrs metadata space |
| Shared xattrs space is similar to the above inode space, started with |
| a specific block indicated by xattr_blkaddr, organized one by one with |
| proper align. |
| |
| Each share xattr can also be directly found by the following formula: |
| xattr offset = xattr_blkaddr * block_size + 4 * xattr_id |
| |
| |-> aligned by 4 bytes |
| + xattr_blkaddr blocks |-> aligned with 4 bytes |
| _________________________________________________________________________ |
| | ... | xattr_entry | xattr data | ... | xattr_entry | xattr data ... |
| |________|_____________|_____________|_____|______________|_______________ |
| |
| Directories |
| ----------- |
| All directories are now organized in a compact on-disk format. Note that |
| each directory block is divided into index and name areas in order to support |
| random file lookup, and all directory entries are _strictly_ recorded in |
| alphabetical order in order to support improved prefix binary search |
| algorithm (could refer to the related source code). |
| |
| ___________________________ |
| / | |
| / ______________|________________ |
| / / | nameoff1 | nameoffN-1 |
| ____________.______________._______________v________________v__________ |
| | dirent | dirent | ... | dirent | filename | filename | ... | filename | |
| |___.0___|____1___|_____|___N-1__|____0_____|____1_____|_____|___N-1____| |
| \ ^ |
| \ | * could have |
| \ | trailing '\0' |
| \________________________| nameoff0 |
| |
| Directory block |
| |
| Note that apart from the offset of the first filename, nameoff0 also indicates |
| the total number of directory entries in this block since it is no need to |
| introduce another on-disk field at all. |
| |
| Compression |
| ----------- |
| Currently, EROFS supports 4KB fixed-sized output transparent file compression, |
| as illustrated below: |
| |
| |---- Variant-Length Extent ----|-------- VLE --------|----- VLE ----- |
| clusterofs clusterofs clusterofs |
| | | | logical data |
| _________v_______________________________v_____________________v_______________ |
| ... | . | | . | | . | ... |
| ____|____.________|_____________|________.____|_____________|__.__________|____ |
| |-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-| |
| size size size size size |
| . . . . |
| . . . . |
| . . . . |
| _______._____________._____________._____________._____________________ |
| ... | | | | ... physical data |
| _______|_____________|_____________|_____________|_____________________ |
| |-> cluster <-|-> cluster <-|-> cluster <-| |
| size size size |
| |
| Currently each on-disk physical cluster can contain 4KB (un)compressed data |
| at most. For each logical cluster, there is a corresponding on-disk index to |
| describe its cluster type, physical cluster address, etc. |
| |
| See "struct z_erofs_vle_decompressed_index" in erofs_fs.h for more details. |
| |
