| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) Jernej Skrabec <jernej.skrabec@siol.net> |
| */ |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| #include <drm/drm_plane_helper.h> |
| #include <drm/drm_probe_helper.h> |
| |
| #include "sun8i_vi_layer.h" |
| #include "sun8i_mixer.h" |
| #include "sun8i_vi_scaler.h" |
| |
| static void sun8i_vi_layer_enable(struct sun8i_mixer *mixer, int channel, |
| int overlay, bool enable, unsigned int zpos, |
| unsigned int old_zpos) |
| { |
| u32 val, bld_base, ch_base; |
| |
| bld_base = sun8i_blender_base(mixer); |
| ch_base = sun8i_channel_base(mixer, channel); |
| |
| DRM_DEBUG_DRIVER("%sabling VI channel %d overlay %d\n", |
| enable ? "En" : "Dis", channel, overlay); |
| |
| if (enable) |
| val = SUN8I_MIXER_CHAN_VI_LAYER_ATTR_EN; |
| else |
| val = 0; |
| |
| regmap_update_bits(mixer->engine.regs, |
| SUN8I_MIXER_CHAN_VI_LAYER_ATTR(ch_base, overlay), |
| SUN8I_MIXER_CHAN_VI_LAYER_ATTR_EN, val); |
| |
| if (!enable || zpos != old_zpos) { |
| regmap_update_bits(mixer->engine.regs, |
| SUN8I_MIXER_BLEND_PIPE_CTL(bld_base), |
| SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos), |
| 0); |
| |
| regmap_update_bits(mixer->engine.regs, |
| SUN8I_MIXER_BLEND_ROUTE(bld_base), |
| SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos), |
| 0); |
| } |
| |
| if (enable) { |
| val = SUN8I_MIXER_BLEND_PIPE_CTL_EN(zpos); |
| |
| regmap_update_bits(mixer->engine.regs, |
| SUN8I_MIXER_BLEND_PIPE_CTL(bld_base), |
| val, val); |
| |
| val = channel << SUN8I_MIXER_BLEND_ROUTE_PIPE_SHIFT(zpos); |
| |
| regmap_update_bits(mixer->engine.regs, |
| SUN8I_MIXER_BLEND_ROUTE(bld_base), |
| SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(zpos), |
| val); |
| } |
| } |
| |
| static int sun8i_vi_layer_update_coord(struct sun8i_mixer *mixer, int channel, |
| int overlay, struct drm_plane *plane, |
| unsigned int zpos) |
| { |
| struct drm_plane_state *state = plane->state; |
| const struct drm_format_info *format = state->fb->format; |
| u32 src_w, src_h, dst_w, dst_h; |
| u32 bld_base, ch_base; |
| u32 outsize, insize; |
| u32 hphase, vphase; |
| u32 hn = 0, hm = 0; |
| u32 vn = 0, vm = 0; |
| bool subsampled; |
| |
| DRM_DEBUG_DRIVER("Updating VI channel %d overlay %d\n", |
| channel, overlay); |
| |
| bld_base = sun8i_blender_base(mixer); |
| ch_base = sun8i_channel_base(mixer, channel); |
| |
| src_w = drm_rect_width(&state->src) >> 16; |
| src_h = drm_rect_height(&state->src) >> 16; |
| dst_w = drm_rect_width(&state->dst); |
| dst_h = drm_rect_height(&state->dst); |
| |
| hphase = state->src.x1 & 0xffff; |
| vphase = state->src.y1 & 0xffff; |
| |
| /* make coordinates dividable by subsampling factor */ |
| if (format->hsub > 1) { |
| int mask, remainder; |
| |
| mask = format->hsub - 1; |
| remainder = (state->src.x1 >> 16) & mask; |
| src_w = (src_w + remainder) & ~mask; |
| hphase += remainder << 16; |
| } |
| |
| if (format->vsub > 1) { |
| int mask, remainder; |
| |
| mask = format->vsub - 1; |
| remainder = (state->src.y1 >> 16) & mask; |
| src_h = (src_h + remainder) & ~mask; |
| vphase += remainder << 16; |
| } |
| |
| insize = SUN8I_MIXER_SIZE(src_w, src_h); |
| outsize = SUN8I_MIXER_SIZE(dst_w, dst_h); |
| |
| /* Set height and width */ |
| DRM_DEBUG_DRIVER("Layer source offset X: %d Y: %d\n", |
| (state->src.x1 >> 16) & ~(format->hsub - 1), |
| (state->src.y1 >> 16) & ~(format->vsub - 1)); |
| DRM_DEBUG_DRIVER("Layer source size W: %d H: %d\n", src_w, src_h); |
| regmap_write(mixer->engine.regs, |
| SUN8I_MIXER_CHAN_VI_LAYER_SIZE(ch_base, overlay), |
| insize); |
| regmap_write(mixer->engine.regs, |
| SUN8I_MIXER_CHAN_VI_OVL_SIZE(ch_base), |
| insize); |
| |
| /* |
| * Scaler must be enabled for subsampled formats, so it scales |
| * chroma to same size as luma. |
| */ |
| subsampled = format->hsub > 1 || format->vsub > 1; |
| |
| if (insize != outsize || subsampled || hphase || vphase) { |
| unsigned int scanline, required; |
| struct drm_display_mode *mode; |
| u32 hscale, vscale, fps; |
| u64 ability; |
| |
| DRM_DEBUG_DRIVER("HW scaling is enabled\n"); |
| |
| mode = &plane->state->crtc->state->mode; |
| fps = (mode->clock * 1000) / (mode->vtotal * mode->htotal); |
| ability = clk_get_rate(mixer->mod_clk); |
| /* BSP algorithm assumes 80% efficiency of VI scaler unit */ |
| ability *= 80; |
| do_div(ability, mode->vdisplay * fps * max(src_w, dst_w)); |
| |
| required = src_h * 100 / dst_h; |
| |
| if (ability < required) { |
| DRM_DEBUG_DRIVER("Using vertical coarse scaling\n"); |
| vm = src_h; |
| vn = (u32)ability * dst_h / 100; |
| src_h = vn; |
| } |
| |
| /* it seems that every RGB scaler has buffer for 2048 pixels */ |
| scanline = subsampled ? mixer->cfg->scanline_yuv : 2048; |
| |
| if (src_w > scanline) { |
| DRM_DEBUG_DRIVER("Using horizontal coarse scaling\n"); |
| hm = src_w; |
| hn = scanline; |
| src_w = hn; |
| } |
| |
| hscale = (src_w << 16) / dst_w; |
| vscale = (src_h << 16) / dst_h; |
| |
| sun8i_vi_scaler_setup(mixer, channel, src_w, src_h, dst_w, |
| dst_h, hscale, vscale, hphase, vphase, |
| format); |
| sun8i_vi_scaler_enable(mixer, channel, true); |
| } else { |
| DRM_DEBUG_DRIVER("HW scaling is not needed\n"); |
| sun8i_vi_scaler_enable(mixer, channel, false); |
| } |
| |
| regmap_write(mixer->engine.regs, |
| SUN8I_MIXER_CHAN_VI_HDS_Y(ch_base), |
| SUN8I_MIXER_CHAN_VI_DS_N(hn) | |
| SUN8I_MIXER_CHAN_VI_DS_M(hm)); |
| regmap_write(mixer->engine.regs, |
| SUN8I_MIXER_CHAN_VI_HDS_UV(ch_base), |
| SUN8I_MIXER_CHAN_VI_DS_N(hn) | |
| SUN8I_MIXER_CHAN_VI_DS_M(hm)); |
| regmap_write(mixer->engine.regs, |
| SUN8I_MIXER_CHAN_VI_VDS_Y(ch_base), |
| SUN8I_MIXER_CHAN_VI_DS_N(vn) | |
| SUN8I_MIXER_CHAN_VI_DS_M(vm)); |
| regmap_write(mixer->engine.regs, |
| SUN8I_MIXER_CHAN_VI_VDS_UV(ch_base), |
| SUN8I_MIXER_CHAN_VI_DS_N(vn) | |
| SUN8I_MIXER_CHAN_VI_DS_M(vm)); |
| |
| /* Set base coordinates */ |
| DRM_DEBUG_DRIVER("Layer destination coordinates X: %d Y: %d\n", |
| state->dst.x1, state->dst.y1); |
| DRM_DEBUG_DRIVER("Layer destination size W: %d H: %d\n", dst_w, dst_h); |
| regmap_write(mixer->engine.regs, |
| SUN8I_MIXER_BLEND_ATTR_COORD(bld_base, zpos), |
| SUN8I_MIXER_COORD(state->dst.x1, state->dst.y1)); |
| regmap_write(mixer->engine.regs, |
| SUN8I_MIXER_BLEND_ATTR_INSIZE(bld_base, zpos), |
| outsize); |
| |
| return 0; |
| } |
| |
| static int sun8i_vi_layer_update_formats(struct sun8i_mixer *mixer, int channel, |
| int overlay, struct drm_plane *plane) |
| { |
| struct drm_plane_state *state = plane->state; |
| const struct de2_fmt_info *fmt_info; |
| u32 val, ch_base; |
| |
| ch_base = sun8i_channel_base(mixer, channel); |
| |
| fmt_info = sun8i_mixer_format_info(state->fb->format->format); |
| if (!fmt_info) { |
| DRM_DEBUG_DRIVER("Invalid format\n"); |
| return -EINVAL; |
| } |
| |
| val = fmt_info->de2_fmt << SUN8I_MIXER_CHAN_VI_LAYER_ATTR_FBFMT_OFFSET; |
| regmap_update_bits(mixer->engine.regs, |
| SUN8I_MIXER_CHAN_VI_LAYER_ATTR(ch_base, overlay), |
| SUN8I_MIXER_CHAN_VI_LAYER_ATTR_FBFMT_MASK, val); |
| |
| if (fmt_info->csc != SUN8I_CSC_MODE_OFF) { |
| sun8i_csc_set_ccsc_coefficients(mixer, channel, fmt_info->csc, |
| state->color_encoding, |
| state->color_range); |
| sun8i_csc_enable_ccsc(mixer, channel, true); |
| } else { |
| sun8i_csc_enable_ccsc(mixer, channel, false); |
| } |
| |
| if (fmt_info->rgb) |
| val = SUN8I_MIXER_CHAN_VI_LAYER_ATTR_RGB_MODE; |
| else |
| val = 0; |
| |
| regmap_update_bits(mixer->engine.regs, |
| SUN8I_MIXER_CHAN_VI_LAYER_ATTR(ch_base, overlay), |
| SUN8I_MIXER_CHAN_VI_LAYER_ATTR_RGB_MODE, val); |
| |
| /* It seems that YUV formats use global alpha setting. */ |
| if (mixer->cfg->is_de3) |
| regmap_update_bits(mixer->engine.regs, |
| SUN8I_MIXER_CHAN_VI_LAYER_ATTR(ch_base, |
| overlay), |
| SUN50I_MIXER_CHAN_VI_LAYER_ATTR_ALPHA_MASK, |
| SUN50I_MIXER_CHAN_VI_LAYER_ATTR_ALPHA(0xff)); |
| |
| return 0; |
| } |
| |
| static int sun8i_vi_layer_update_buffer(struct sun8i_mixer *mixer, int channel, |
| int overlay, struct drm_plane *plane) |
| { |
| struct drm_plane_state *state = plane->state; |
| struct drm_framebuffer *fb = state->fb; |
| const struct drm_format_info *format = fb->format; |
| struct drm_gem_cma_object *gem; |
| u32 dx, dy, src_x, src_y; |
| dma_addr_t paddr; |
| u32 ch_base; |
| int i; |
| |
| ch_base = sun8i_channel_base(mixer, channel); |
| |
| /* Adjust x and y to be dividable by subsampling factor */ |
| src_x = (state->src.x1 >> 16) & ~(format->hsub - 1); |
| src_y = (state->src.y1 >> 16) & ~(format->vsub - 1); |
| |
| for (i = 0; i < format->num_planes; i++) { |
| /* Get the physical address of the buffer in memory */ |
| gem = drm_fb_cma_get_gem_obj(fb, i); |
| |
| DRM_DEBUG_DRIVER("Using GEM @ %pad\n", &gem->paddr); |
| |
| /* Compute the start of the displayed memory */ |
| paddr = gem->paddr + fb->offsets[i]; |
| |
| dx = src_x; |
| dy = src_y; |
| |
| if (i > 0) { |
| dx /= format->hsub; |
| dy /= format->vsub; |
| } |
| |
| /* Fixup framebuffer address for src coordinates */ |
| paddr += dx * format->cpp[i]; |
| paddr += dy * fb->pitches[i]; |
| |
| /* Set the line width */ |
| DRM_DEBUG_DRIVER("Layer %d. line width: %d bytes\n", |
| i + 1, fb->pitches[i]); |
| regmap_write(mixer->engine.regs, |
| SUN8I_MIXER_CHAN_VI_LAYER_PITCH(ch_base, |
| overlay, i), |
| fb->pitches[i]); |
| |
| DRM_DEBUG_DRIVER("Setting %d. buffer address to %pad\n", |
| i + 1, &paddr); |
| |
| regmap_write(mixer->engine.regs, |
| SUN8I_MIXER_CHAN_VI_LAYER_TOP_LADDR(ch_base, |
| overlay, i), |
| lower_32_bits(paddr)); |
| } |
| |
| return 0; |
| } |
| |
| static int sun8i_vi_layer_atomic_check(struct drm_plane *plane, |
| struct drm_plane_state *state) |
| { |
| struct sun8i_vi_layer *layer = plane_to_sun8i_vi_layer(plane); |
| struct drm_crtc *crtc = state->crtc; |
| struct drm_crtc_state *crtc_state; |
| int min_scale, max_scale; |
| |
| if (!crtc) |
| return 0; |
| |
| crtc_state = drm_atomic_get_existing_crtc_state(state->state, crtc); |
| if (WARN_ON(!crtc_state)) |
| return -EINVAL; |
| |
| min_scale = DRM_PLANE_HELPER_NO_SCALING; |
| max_scale = DRM_PLANE_HELPER_NO_SCALING; |
| |
| if (layer->mixer->cfg->scaler_mask & BIT(layer->channel)) { |
| min_scale = SUN8I_VI_SCALER_SCALE_MIN; |
| max_scale = SUN8I_VI_SCALER_SCALE_MAX; |
| } |
| |
| return drm_atomic_helper_check_plane_state(state, crtc_state, |
| min_scale, max_scale, |
| true, true); |
| } |
| |
| static void sun8i_vi_layer_atomic_disable(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct sun8i_vi_layer *layer = plane_to_sun8i_vi_layer(plane); |
| unsigned int old_zpos = old_state->normalized_zpos; |
| struct sun8i_mixer *mixer = layer->mixer; |
| |
| sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay, false, 0, |
| old_zpos); |
| } |
| |
| static void sun8i_vi_layer_atomic_update(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct sun8i_vi_layer *layer = plane_to_sun8i_vi_layer(plane); |
| unsigned int zpos = plane->state->normalized_zpos; |
| unsigned int old_zpos = old_state->normalized_zpos; |
| struct sun8i_mixer *mixer = layer->mixer; |
| |
| if (!plane->state->visible) { |
| sun8i_vi_layer_enable(mixer, layer->channel, |
| layer->overlay, false, 0, old_zpos); |
| return; |
| } |
| |
| sun8i_vi_layer_update_coord(mixer, layer->channel, |
| layer->overlay, plane, zpos); |
| sun8i_vi_layer_update_formats(mixer, layer->channel, |
| layer->overlay, plane); |
| sun8i_vi_layer_update_buffer(mixer, layer->channel, |
| layer->overlay, plane); |
| sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay, |
| true, zpos, old_zpos); |
| } |
| |
| static struct drm_plane_helper_funcs sun8i_vi_layer_helper_funcs = { |
| .prepare_fb = drm_gem_fb_prepare_fb, |
| .atomic_check = sun8i_vi_layer_atomic_check, |
| .atomic_disable = sun8i_vi_layer_atomic_disable, |
| .atomic_update = sun8i_vi_layer_atomic_update, |
| }; |
| |
| static const struct drm_plane_funcs sun8i_vi_layer_funcs = { |
| .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, |
| .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, |
| .destroy = drm_plane_cleanup, |
| .disable_plane = drm_atomic_helper_disable_plane, |
| .reset = drm_atomic_helper_plane_reset, |
| .update_plane = drm_atomic_helper_update_plane, |
| }; |
| |
| /* |
| * While all RGB formats are supported, VI planes don't support |
| * alpha blending, so there is no point having formats with alpha |
| * channel if their opaque analog exist. |
| */ |
| static const u32 sun8i_vi_layer_formats[] = { |
| DRM_FORMAT_ABGR1555, |
| DRM_FORMAT_ABGR4444, |
| DRM_FORMAT_ARGB1555, |
| DRM_FORMAT_ARGB4444, |
| DRM_FORMAT_BGR565, |
| DRM_FORMAT_BGR888, |
| DRM_FORMAT_BGRA5551, |
| DRM_FORMAT_BGRA4444, |
| DRM_FORMAT_BGRX8888, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_RGB888, |
| DRM_FORMAT_RGBA4444, |
| DRM_FORMAT_RGBA5551, |
| DRM_FORMAT_RGBX8888, |
| DRM_FORMAT_XBGR8888, |
| DRM_FORMAT_XRGB8888, |
| |
| DRM_FORMAT_NV16, |
| DRM_FORMAT_NV12, |
| DRM_FORMAT_NV21, |
| DRM_FORMAT_NV61, |
| DRM_FORMAT_UYVY, |
| DRM_FORMAT_VYUY, |
| DRM_FORMAT_YUYV, |
| DRM_FORMAT_YVYU, |
| DRM_FORMAT_YUV411, |
| DRM_FORMAT_YUV420, |
| DRM_FORMAT_YUV422, |
| DRM_FORMAT_YUV444, |
| DRM_FORMAT_YVU411, |
| DRM_FORMAT_YVU420, |
| DRM_FORMAT_YVU422, |
| DRM_FORMAT_YVU444, |
| }; |
| |
| struct sun8i_vi_layer *sun8i_vi_layer_init_one(struct drm_device *drm, |
| struct sun8i_mixer *mixer, |
| int index) |
| { |
| u32 supported_encodings, supported_ranges; |
| struct sun8i_vi_layer *layer; |
| unsigned int plane_cnt; |
| int ret; |
| |
| layer = devm_kzalloc(drm->dev, sizeof(*layer), GFP_KERNEL); |
| if (!layer) |
| return ERR_PTR(-ENOMEM); |
| |
| /* possible crtcs are set later */ |
| ret = drm_universal_plane_init(drm, &layer->plane, 0, |
| &sun8i_vi_layer_funcs, |
| sun8i_vi_layer_formats, |
| ARRAY_SIZE(sun8i_vi_layer_formats), |
| NULL, DRM_PLANE_TYPE_OVERLAY, NULL); |
| if (ret) { |
| dev_err(drm->dev, "Couldn't initialize layer\n"); |
| return ERR_PTR(ret); |
| } |
| |
| plane_cnt = mixer->cfg->ui_num + mixer->cfg->vi_num; |
| |
| ret = drm_plane_create_zpos_property(&layer->plane, index, |
| 0, plane_cnt - 1); |
| if (ret) { |
| dev_err(drm->dev, "Couldn't add zpos property\n"); |
| return ERR_PTR(ret); |
| } |
| |
| supported_encodings = BIT(DRM_COLOR_YCBCR_BT601) | |
| BIT(DRM_COLOR_YCBCR_BT709); |
| |
| supported_ranges = BIT(DRM_COLOR_YCBCR_LIMITED_RANGE) | |
| BIT(DRM_COLOR_YCBCR_FULL_RANGE); |
| |
| ret = drm_plane_create_color_properties(&layer->plane, |
| supported_encodings, |
| supported_ranges, |
| DRM_COLOR_YCBCR_BT709, |
| DRM_COLOR_YCBCR_LIMITED_RANGE); |
| if (ret) { |
| dev_err(drm->dev, "Couldn't add encoding and range properties!\n"); |
| return ERR_PTR(ret); |
| } |
| |
| drm_plane_helper_add(&layer->plane, &sun8i_vi_layer_helper_funcs); |
| layer->mixer = mixer; |
| layer->channel = index; |
| layer->overlay = 0; |
| |
| return layer; |
| } |