| /* |
| * drivers/mmc/host/sdhci-spear.c |
| * |
| * Support of SDHCI platform devices for spear soc family |
| * |
| * Copyright (C) 2010 ST Microelectronics |
| * Viresh Kumar <vireshk@kernel.org> |
| * |
| * Inspired by sdhci-pltfm.c |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/highmem.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm.h> |
| #include <linux/slab.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/slot-gpio.h> |
| #include <linux/io.h> |
| #include "sdhci.h" |
| |
| struct spear_sdhci { |
| struct clk *clk; |
| }; |
| |
| /* sdhci ops */ |
| static const struct sdhci_ops sdhci_pltfm_ops = { |
| .set_clock = sdhci_set_clock, |
| .set_bus_width = sdhci_set_bus_width, |
| .reset = sdhci_reset, |
| .set_uhs_signaling = sdhci_set_uhs_signaling, |
| }; |
| |
| static int sdhci_probe(struct platform_device *pdev) |
| { |
| struct sdhci_host *host; |
| struct resource *iomem; |
| struct spear_sdhci *sdhci; |
| struct device *dev; |
| int ret; |
| |
| dev = pdev->dev.parent ? pdev->dev.parent : &pdev->dev; |
| host = sdhci_alloc_host(dev, sizeof(*sdhci)); |
| if (IS_ERR(host)) { |
| ret = PTR_ERR(host); |
| dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n"); |
| goto err; |
| } |
| |
| iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem); |
| if (IS_ERR(host->ioaddr)) { |
| ret = PTR_ERR(host->ioaddr); |
| dev_dbg(&pdev->dev, "unable to map iomem: %d\n", ret); |
| goto err_host; |
| } |
| |
| host->hw_name = "sdhci"; |
| host->ops = &sdhci_pltfm_ops; |
| host->irq = platform_get_irq(pdev, 0); |
| if (host->irq <= 0) { |
| ret = -EINVAL; |
| goto err_host; |
| } |
| host->quirks = SDHCI_QUIRK_BROKEN_ADMA; |
| |
| sdhci = sdhci_priv(host); |
| |
| /* clk enable */ |
| sdhci->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(sdhci->clk)) { |
| ret = PTR_ERR(sdhci->clk); |
| dev_dbg(&pdev->dev, "Error getting clock\n"); |
| goto err_host; |
| } |
| |
| ret = clk_prepare_enable(sdhci->clk); |
| if (ret) { |
| dev_dbg(&pdev->dev, "Error enabling clock\n"); |
| goto err_host; |
| } |
| |
| ret = clk_set_rate(sdhci->clk, 50000000); |
| if (ret) |
| dev_dbg(&pdev->dev, "Error setting desired clk, clk=%lu\n", |
| clk_get_rate(sdhci->clk)); |
| |
| /* |
| * It is optional to use GPIOs for sdhci card detection. If we |
| * find a descriptor using slot GPIO, we use it. |
| */ |
| ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL); |
| if (ret == -EPROBE_DEFER) |
| goto disable_clk; |
| |
| ret = sdhci_add_host(host); |
| if (ret) |
| goto disable_clk; |
| |
| platform_set_drvdata(pdev, host); |
| |
| return 0; |
| |
| disable_clk: |
| clk_disable_unprepare(sdhci->clk); |
| err_host: |
| sdhci_free_host(host); |
| err: |
| dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret); |
| return ret; |
| } |
| |
| static int sdhci_remove(struct platform_device *pdev) |
| { |
| struct sdhci_host *host = platform_get_drvdata(pdev); |
| struct spear_sdhci *sdhci = sdhci_priv(host); |
| int dead = 0; |
| u32 scratch; |
| |
| scratch = readl(host->ioaddr + SDHCI_INT_STATUS); |
| if (scratch == (u32)-1) |
| dead = 1; |
| |
| sdhci_remove_host(host, dead); |
| clk_disable_unprepare(sdhci->clk); |
| sdhci_free_host(host); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int sdhci_suspend(struct device *dev) |
| { |
| struct sdhci_host *host = dev_get_drvdata(dev); |
| struct spear_sdhci *sdhci = sdhci_priv(host); |
| int ret; |
| |
| if (host->tuning_mode != SDHCI_TUNING_MODE_3) |
| mmc_retune_needed(host->mmc); |
| |
| ret = sdhci_suspend_host(host); |
| if (!ret) |
| clk_disable(sdhci->clk); |
| |
| return ret; |
| } |
| |
| static int sdhci_resume(struct device *dev) |
| { |
| struct sdhci_host *host = dev_get_drvdata(dev); |
| struct spear_sdhci *sdhci = sdhci_priv(host); |
| int ret; |
| |
| ret = clk_enable(sdhci->clk); |
| if (ret) { |
| dev_dbg(dev, "Resume: Error enabling clock\n"); |
| return ret; |
| } |
| |
| return sdhci_resume_host(host); |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(sdhci_pm_ops, sdhci_suspend, sdhci_resume); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id sdhci_spear_id_table[] = { |
| { .compatible = "st,spear300-sdhci" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, sdhci_spear_id_table); |
| #endif |
| |
| static struct platform_driver sdhci_driver = { |
| .driver = { |
| .name = "sdhci", |
| .pm = &sdhci_pm_ops, |
| .of_match_table = of_match_ptr(sdhci_spear_id_table), |
| }, |
| .probe = sdhci_probe, |
| .remove = sdhci_remove, |
| }; |
| |
| module_platform_driver(sdhci_driver); |
| |
| MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver"); |
| MODULE_AUTHOR("Viresh Kumar <vireshk@kernel.org>"); |
| MODULE_LICENSE("GPL v2"); |