| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/scatterlist.h> |
| #include <linux/mutex.h> |
| #include <linux/timer.h> |
| #include <linux/usb.h> |
| |
| #define SIMPLE_IO_TIMEOUT 10000 /* in milliseconds */ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int override_alt = -1; |
| module_param_named(alt, override_alt, int, 0644); |
| MODULE_PARM_DESC(alt, ">= 0 to override altsetting selection"); |
| static void complicated_callback(struct urb *urb); |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* FIXME make these public somewhere; usbdevfs.h? */ |
| |
| /* Parameter for usbtest driver. */ |
| struct usbtest_param_32 { |
| /* inputs */ |
| __u32 test_num; /* 0..(TEST_CASES-1) */ |
| __u32 iterations; |
| __u32 length; |
| __u32 vary; |
| __u32 sglen; |
| |
| /* outputs */ |
| __s32 duration_sec; |
| __s32 duration_usec; |
| }; |
| |
| /* |
| * Compat parameter to the usbtest driver. |
| * This supports older user space binaries compiled with 64 bit compiler. |
| */ |
| struct usbtest_param_64 { |
| /* inputs */ |
| __u32 test_num; /* 0..(TEST_CASES-1) */ |
| __u32 iterations; |
| __u32 length; |
| __u32 vary; |
| __u32 sglen; |
| |
| /* outputs */ |
| __s64 duration_sec; |
| __s64 duration_usec; |
| }; |
| |
| /* IOCTL interface to the driver. */ |
| #define USBTEST_REQUEST_32 _IOWR('U', 100, struct usbtest_param_32) |
| /* COMPAT IOCTL interface to the driver. */ |
| #define USBTEST_REQUEST_64 _IOWR('U', 100, struct usbtest_param_64) |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #define GENERIC /* let probe() bind using module params */ |
| |
| /* Some devices that can be used for testing will have "real" drivers. |
| * Entries for those need to be enabled here by hand, after disabling |
| * that "real" driver. |
| */ |
| //#define IBOT2 /* grab iBOT2 webcams */ |
| //#define KEYSPAN_19Qi /* grab un-renumerated serial adapter */ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| struct usbtest_info { |
| const char *name; |
| u8 ep_in; /* bulk/intr source */ |
| u8 ep_out; /* bulk/intr sink */ |
| unsigned autoconf:1; |
| unsigned ctrl_out:1; |
| unsigned iso:1; /* try iso in/out */ |
| unsigned intr:1; /* try interrupt in/out */ |
| int alt; |
| }; |
| |
| /* this is accessed only through usbfs ioctl calls. |
| * one ioctl to issue a test ... one lock per device. |
| * tests create other threads if they need them. |
| * urbs and buffers are allocated dynamically, |
| * and data generated deterministically. |
| */ |
| struct usbtest_dev { |
| struct usb_interface *intf; |
| struct usbtest_info *info; |
| int in_pipe; |
| int out_pipe; |
| int in_iso_pipe; |
| int out_iso_pipe; |
| int in_int_pipe; |
| int out_int_pipe; |
| struct usb_endpoint_descriptor *iso_in, *iso_out; |
| struct usb_endpoint_descriptor *int_in, *int_out; |
| struct mutex lock; |
| |
| #define TBUF_SIZE 256 |
| u8 *buf; |
| }; |
| |
| static struct usb_device *testdev_to_usbdev(struct usbtest_dev *test) |
| { |
| return interface_to_usbdev(test->intf); |
| } |
| |
| /* set up all urbs so they can be used with either bulk or interrupt */ |
| #define INTERRUPT_RATE 1 /* msec/transfer */ |
| |
| #define ERROR(tdev, fmt, args...) \ |
| dev_err(&(tdev)->intf->dev , fmt , ## args) |
| #define WARNING(tdev, fmt, args...) \ |
| dev_warn(&(tdev)->intf->dev , fmt , ## args) |
| |
| #define GUARD_BYTE 0xA5 |
| #define MAX_SGLEN 128 |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static inline void endpoint_update(int edi, |
| struct usb_host_endpoint **in, |
| struct usb_host_endpoint **out, |
| struct usb_host_endpoint *e) |
| { |
| if (edi) { |
| if (!*in) |
| *in = e; |
| } else { |
| if (!*out) |
| *out = e; |
| } |
| } |
| |
| static int |
| get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf) |
| { |
| int tmp; |
| struct usb_host_interface *alt; |
| struct usb_host_endpoint *in, *out; |
| struct usb_host_endpoint *iso_in, *iso_out; |
| struct usb_host_endpoint *int_in, *int_out; |
| struct usb_device *udev; |
| |
| for (tmp = 0; tmp < intf->num_altsetting; tmp++) { |
| unsigned ep; |
| |
| in = out = NULL; |
| iso_in = iso_out = NULL; |
| int_in = int_out = NULL; |
| alt = intf->altsetting + tmp; |
| |
| if (override_alt >= 0 && |
| override_alt != alt->desc.bAlternateSetting) |
| continue; |
| |
| /* take the first altsetting with in-bulk + out-bulk; |
| * ignore other endpoints and altsettings. |
| */ |
| for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) { |
| struct usb_host_endpoint *e; |
| int edi; |
| |
| e = alt->endpoint + ep; |
| edi = usb_endpoint_dir_in(&e->desc); |
| |
| switch (usb_endpoint_type(&e->desc)) { |
| case USB_ENDPOINT_XFER_BULK: |
| endpoint_update(edi, &in, &out, e); |
| continue; |
| case USB_ENDPOINT_XFER_INT: |
| if (dev->info->intr) |
| endpoint_update(edi, &int_in, &int_out, e); |
| continue; |
| case USB_ENDPOINT_XFER_ISOC: |
| if (dev->info->iso) |
| endpoint_update(edi, &iso_in, &iso_out, e); |
| /* FALLTHROUGH */ |
| default: |
| continue; |
| } |
| } |
| if ((in && out) || iso_in || iso_out || int_in || int_out) |
| goto found; |
| } |
| return -EINVAL; |
| |
| found: |
| udev = testdev_to_usbdev(dev); |
| dev->info->alt = alt->desc.bAlternateSetting; |
| if (alt->desc.bAlternateSetting != 0) { |
| tmp = usb_set_interface(udev, |
| alt->desc.bInterfaceNumber, |
| alt->desc.bAlternateSetting); |
| if (tmp < 0) |
| return tmp; |
| } |
| |
| if (in) |
| dev->in_pipe = usb_rcvbulkpipe(udev, |
| in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); |
| if (out) |
| dev->out_pipe = usb_sndbulkpipe(udev, |
| out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); |
| |
| if (iso_in) { |
| dev->iso_in = &iso_in->desc; |
| dev->in_iso_pipe = usb_rcvisocpipe(udev, |
| iso_in->desc.bEndpointAddress |
| & USB_ENDPOINT_NUMBER_MASK); |
| } |
| |
| if (iso_out) { |
| dev->iso_out = &iso_out->desc; |
| dev->out_iso_pipe = usb_sndisocpipe(udev, |
| iso_out->desc.bEndpointAddress |
| & USB_ENDPOINT_NUMBER_MASK); |
| } |
| |
| if (int_in) { |
| dev->int_in = &int_in->desc; |
| dev->in_int_pipe = usb_rcvintpipe(udev, |
| int_in->desc.bEndpointAddress |
| & USB_ENDPOINT_NUMBER_MASK); |
| } |
| |
| if (int_out) { |
| dev->int_out = &int_out->desc; |
| dev->out_int_pipe = usb_sndintpipe(udev, |
| int_out->desc.bEndpointAddress |
| & USB_ENDPOINT_NUMBER_MASK); |
| } |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* Support for testing basic non-queued I/O streams. |
| * |
| * These just package urbs as requests that can be easily canceled. |
| * Each urb's data buffer is dynamically allocated; callers can fill |
| * them with non-zero test data (or test for it) when appropriate. |
| */ |
| |
| static void simple_callback(struct urb *urb) |
| { |
| complete(urb->context); |
| } |
| |
| static struct urb *usbtest_alloc_urb( |
| struct usb_device *udev, |
| int pipe, |
| unsigned long bytes, |
| unsigned transfer_flags, |
| unsigned offset, |
| u8 bInterval, |
| usb_complete_t complete_fn) |
| { |
| struct urb *urb; |
| |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) |
| return urb; |
| |
| if (bInterval) |
| usb_fill_int_urb(urb, udev, pipe, NULL, bytes, complete_fn, |
| NULL, bInterval); |
| else |
| usb_fill_bulk_urb(urb, udev, pipe, NULL, bytes, complete_fn, |
| NULL); |
| |
| urb->interval = (udev->speed == USB_SPEED_HIGH) |
| ? (INTERRUPT_RATE << 3) |
| : INTERRUPT_RATE; |
| urb->transfer_flags = transfer_flags; |
| if (usb_pipein(pipe)) |
| urb->transfer_flags |= URB_SHORT_NOT_OK; |
| |
| if ((bytes + offset) == 0) |
| return urb; |
| |
| if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) |
| urb->transfer_buffer = usb_alloc_coherent(udev, bytes + offset, |
| GFP_KERNEL, &urb->transfer_dma); |
| else |
| urb->transfer_buffer = kmalloc(bytes + offset, GFP_KERNEL); |
| |
| if (!urb->transfer_buffer) { |
| usb_free_urb(urb); |
| return NULL; |
| } |
| |
| /* To test unaligned transfers add an offset and fill the |
| unused memory with a guard value */ |
| if (offset) { |
| memset(urb->transfer_buffer, GUARD_BYTE, offset); |
| urb->transfer_buffer += offset; |
| if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) |
| urb->transfer_dma += offset; |
| } |
| |
| /* For inbound transfers use guard byte so that test fails if |
| data not correctly copied */ |
| memset(urb->transfer_buffer, |
| usb_pipein(urb->pipe) ? GUARD_BYTE : 0, |
| bytes); |
| return urb; |
| } |
| |
| static struct urb *simple_alloc_urb( |
| struct usb_device *udev, |
| int pipe, |
| unsigned long bytes, |
| u8 bInterval) |
| { |
| return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0, |
| bInterval, simple_callback); |
| } |
| |
| static struct urb *complicated_alloc_urb( |
| struct usb_device *udev, |
| int pipe, |
| unsigned long bytes, |
| u8 bInterval) |
| { |
| return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0, |
| bInterval, complicated_callback); |
| } |
| |
| static unsigned pattern; |
| static unsigned mod_pattern; |
| module_param_named(pattern, mod_pattern, uint, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(mod_pattern, "i/o pattern (0 == zeroes)"); |
| |
| static unsigned get_maxpacket(struct usb_device *udev, int pipe) |
| { |
| struct usb_host_endpoint *ep; |
| |
| ep = usb_pipe_endpoint(udev, pipe); |
| return le16_to_cpup(&ep->desc.wMaxPacketSize); |
| } |
| |
| static void simple_fill_buf(struct urb *urb) |
| { |
| unsigned i; |
| u8 *buf = urb->transfer_buffer; |
| unsigned len = urb->transfer_buffer_length; |
| unsigned maxpacket; |
| |
| switch (pattern) { |
| default: |
| /* FALLTHROUGH */ |
| case 0: |
| memset(buf, 0, len); |
| break; |
| case 1: /* mod63 */ |
| maxpacket = get_maxpacket(urb->dev, urb->pipe); |
| for (i = 0; i < len; i++) |
| *buf++ = (u8) ((i % maxpacket) % 63); |
| break; |
| } |
| } |
| |
| static inline unsigned long buffer_offset(void *buf) |
| { |
| return (unsigned long)buf & (ARCH_KMALLOC_MINALIGN - 1); |
| } |
| |
| static int check_guard_bytes(struct usbtest_dev *tdev, struct urb *urb) |
| { |
| u8 *buf = urb->transfer_buffer; |
| u8 *guard = buf - buffer_offset(buf); |
| unsigned i; |
| |
| for (i = 0; guard < buf; i++, guard++) { |
| if (*guard != GUARD_BYTE) { |
| ERROR(tdev, "guard byte[%d] %d (not %d)\n", |
| i, *guard, GUARD_BYTE); |
| return -EINVAL; |
| } |
| } |
| return 0; |
| } |
| |
| static int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb) |
| { |
| unsigned i; |
| u8 expected; |
| u8 *buf = urb->transfer_buffer; |
| unsigned len = urb->actual_length; |
| unsigned maxpacket = get_maxpacket(urb->dev, urb->pipe); |
| |
| int ret = check_guard_bytes(tdev, urb); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < len; i++, buf++) { |
| switch (pattern) { |
| /* all-zeroes has no synchronization issues */ |
| case 0: |
| expected = 0; |
| break; |
| /* mod63 stays in sync with short-terminated transfers, |
| * or otherwise when host and gadget agree on how large |
| * each usb transfer request should be. resync is done |
| * with set_interface or set_config. |
| */ |
| case 1: /* mod63 */ |
| expected = (i % maxpacket) % 63; |
| break; |
| /* always fail unsupported patterns */ |
| default: |
| expected = !*buf; |
| break; |
| } |
| if (*buf == expected) |
| continue; |
| ERROR(tdev, "buf[%d] = %d (not %d)\n", i, *buf, expected); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static void simple_free_urb(struct urb *urb) |
| { |
| unsigned long offset = buffer_offset(urb->transfer_buffer); |
| |
| if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) |
| usb_free_coherent( |
| urb->dev, |
| urb->transfer_buffer_length + offset, |
| urb->transfer_buffer - offset, |
| urb->transfer_dma - offset); |
| else |
| kfree(urb->transfer_buffer - offset); |
| usb_free_urb(urb); |
| } |
| |
| static int simple_io( |
| struct usbtest_dev *tdev, |
| struct urb *urb, |
| int iterations, |
| int vary, |
| int expected, |
| const char *label |
| ) |
| { |
| struct usb_device *udev = urb->dev; |
| int max = urb->transfer_buffer_length; |
| struct completion completion; |
| int retval = 0; |
| unsigned long expire; |
| |
| urb->context = &completion; |
| while (retval == 0 && iterations-- > 0) { |
| init_completion(&completion); |
| if (usb_pipeout(urb->pipe)) { |
| simple_fill_buf(urb); |
| urb->transfer_flags |= URB_ZERO_PACKET; |
| } |
| retval = usb_submit_urb(urb, GFP_KERNEL); |
| if (retval != 0) |
| break; |
| |
| expire = msecs_to_jiffies(SIMPLE_IO_TIMEOUT); |
| if (!wait_for_completion_timeout(&completion, expire)) { |
| usb_kill_urb(urb); |
| retval = (urb->status == -ENOENT ? |
| -ETIMEDOUT : urb->status); |
| } else { |
| retval = urb->status; |
| } |
| |
| urb->dev = udev; |
| if (retval == 0 && usb_pipein(urb->pipe)) |
| retval = simple_check_buf(tdev, urb); |
| |
| if (vary) { |
| int len = urb->transfer_buffer_length; |
| |
| len += vary; |
| len %= max; |
| if (len == 0) |
| len = (vary < max) ? vary : max; |
| urb->transfer_buffer_length = len; |
| } |
| |
| /* FIXME if endpoint halted, clear halt (and log) */ |
| } |
| urb->transfer_buffer_length = max; |
| |
| if (expected != retval) |
| dev_err(&udev->dev, |
| "%s failed, iterations left %d, status %d (not %d)\n", |
| label, iterations, retval, expected); |
| return retval; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* We use scatterlist primitives to test queued I/O. |
| * Yes, this also tests the scatterlist primitives. |
| */ |
| |
| static void free_sglist(struct scatterlist *sg, int nents) |
| { |
| unsigned i; |
| |
| if (!sg) |
| return; |
| for (i = 0; i < nents; i++) { |
| if (!sg_page(&sg[i])) |
| continue; |
| kfree(sg_virt(&sg[i])); |
| } |
| kfree(sg); |
| } |
| |
| static struct scatterlist * |
| alloc_sglist(int nents, int max, int vary, struct usbtest_dev *dev, int pipe) |
| { |
| struct scatterlist *sg; |
| unsigned int n_size = 0; |
| unsigned i; |
| unsigned size = max; |
| unsigned maxpacket = |
| get_maxpacket(interface_to_usbdev(dev->intf), pipe); |
| |
| if (max == 0) |
| return NULL; |
| |
| sg = kmalloc_array(nents, sizeof(*sg), GFP_KERNEL); |
| if (!sg) |
| return NULL; |
| sg_init_table(sg, nents); |
| |
| for (i = 0; i < nents; i++) { |
| char *buf; |
| unsigned j; |
| |
| buf = kzalloc(size, GFP_KERNEL); |
| if (!buf) { |
| free_sglist(sg, i); |
| return NULL; |
| } |
| |
| /* kmalloc pages are always physically contiguous! */ |
| sg_set_buf(&sg[i], buf, size); |
| |
| switch (pattern) { |
| case 0: |
| /* already zeroed */ |
| break; |
| case 1: |
| for (j = 0; j < size; j++) |
| *buf++ = (u8) (((j + n_size) % maxpacket) % 63); |
| n_size += size; |
| break; |
| } |
| |
| if (vary) { |
| size += vary; |
| size %= max; |
| if (size == 0) |
| size = (vary < max) ? vary : max; |
| } |
| } |
| |
| return sg; |
| } |
| |
| struct sg_timeout { |
| struct timer_list timer; |
| struct usb_sg_request *req; |
| }; |
| |
| static void sg_timeout(struct timer_list *t) |
| { |
| struct sg_timeout *timeout = from_timer(timeout, t, timer); |
| |
| usb_sg_cancel(timeout->req); |
| } |
| |
| static int perform_sglist( |
| struct usbtest_dev *tdev, |
| unsigned iterations, |
| int pipe, |
| struct usb_sg_request *req, |
| struct scatterlist *sg, |
| int nents |
| ) |
| { |
| struct usb_device *udev = testdev_to_usbdev(tdev); |
| int retval = 0; |
| struct sg_timeout timeout = { |
| .req = req, |
| }; |
| |
| timer_setup_on_stack(&timeout.timer, sg_timeout, 0); |
| |
| while (retval == 0 && iterations-- > 0) { |
| retval = usb_sg_init(req, udev, pipe, |
| (udev->speed == USB_SPEED_HIGH) |
| ? (INTERRUPT_RATE << 3) |
| : INTERRUPT_RATE, |
| sg, nents, 0, GFP_KERNEL); |
| |
| if (retval) |
| break; |
| mod_timer(&timeout.timer, jiffies + |
| msecs_to_jiffies(SIMPLE_IO_TIMEOUT)); |
| usb_sg_wait(req); |
| if (!del_timer_sync(&timeout.timer)) |
| retval = -ETIMEDOUT; |
| else |
| retval = req->status; |
| destroy_timer_on_stack(&timeout.timer); |
| |
| /* FIXME check resulting data pattern */ |
| |
| /* FIXME if endpoint halted, clear halt (and log) */ |
| } |
| |
| /* FIXME for unlink or fault handling tests, don't report |
| * failure if retval is as we expected ... |
| */ |
| if (retval) |
| ERROR(tdev, "perform_sglist failed, " |
| "iterations left %d, status %d\n", |
| iterations, retval); |
| return retval; |
| } |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* unqueued control message testing |
| * |
| * there's a nice set of device functional requirements in chapter 9 of the |
| * usb 2.0 spec, which we can apply to ANY device, even ones that don't use |
| * special test firmware. |
| * |
| * we know the device is configured (or suspended) by the time it's visible |
| * through usbfs. we can't change that, so we won't test enumeration (which |
| * worked 'well enough' to get here, this time), power management (ditto), |
| * or remote wakeup (which needs human interaction). |
| */ |
| |
| static unsigned realworld = 1; |
| module_param(realworld, uint, 0); |
| MODULE_PARM_DESC(realworld, "clear to demand stricter spec compliance"); |
| |
| static int get_altsetting(struct usbtest_dev *dev) |
| { |
| struct usb_interface *iface = dev->intf; |
| struct usb_device *udev = interface_to_usbdev(iface); |
| int retval; |
| |
| retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), |
| USB_REQ_GET_INTERFACE, USB_DIR_IN|USB_RECIP_INTERFACE, |
| 0, iface->altsetting[0].desc.bInterfaceNumber, |
| dev->buf, 1, USB_CTRL_GET_TIMEOUT); |
| switch (retval) { |
| case 1: |
| return dev->buf[0]; |
| case 0: |
| retval = -ERANGE; |
| /* FALLTHROUGH */ |
| default: |
| return retval; |
| } |
| } |
| |
| static int set_altsetting(struct usbtest_dev *dev, int alternate) |
| { |
| struct usb_interface *iface = dev->intf; |
| struct usb_device *udev; |
| |
| if (alternate < 0 || alternate >= 256) |
| return -EINVAL; |
| |
| udev = interface_to_usbdev(iface); |
| return usb_set_interface(udev, |
| iface->altsetting[0].desc.bInterfaceNumber, |
| alternate); |
| } |
| |
| static int is_good_config(struct usbtest_dev *tdev, int len) |
| { |
| struct usb_config_descriptor *config; |
| |
| if (len < sizeof(*config)) |
| return 0; |
| config = (struct usb_config_descriptor *) tdev->buf; |
| |
| switch (config->bDescriptorType) { |
| case USB_DT_CONFIG: |
| case USB_DT_OTHER_SPEED_CONFIG: |
| if (config->bLength != 9) { |
| ERROR(tdev, "bogus config descriptor length\n"); |
| return 0; |
| } |
| /* this bit 'must be 1' but often isn't */ |
| if (!realworld && !(config->bmAttributes & 0x80)) { |
| ERROR(tdev, "high bit of config attributes not set\n"); |
| return 0; |
| } |
| if (config->bmAttributes & 0x1f) { /* reserved == 0 */ |
| ERROR(tdev, "reserved config bits set\n"); |
| return 0; |
| } |
| break; |
| default: |
| return 0; |
| } |
| |
| if (le16_to_cpu(config->wTotalLength) == len) /* read it all */ |
| return 1; |
| if (le16_to_cpu(config->wTotalLength) >= TBUF_SIZE) /* max partial read */ |
| return 1; |
| ERROR(tdev, "bogus config descriptor read size\n"); |
| return 0; |
| } |
| |
| static int is_good_ext(struct usbtest_dev *tdev, u8 *buf) |
| { |
| struct usb_ext_cap_descriptor *ext; |
| u32 attr; |
| |
| ext = (struct usb_ext_cap_descriptor *) buf; |
| |
| if (ext->bLength != USB_DT_USB_EXT_CAP_SIZE) { |
| ERROR(tdev, "bogus usb 2.0 extension descriptor length\n"); |
| return 0; |
| } |
| |
| attr = le32_to_cpu(ext->bmAttributes); |
| /* bits[1:15] is used and others are reserved */ |
| if (attr & ~0xfffe) { /* reserved == 0 */ |
| ERROR(tdev, "reserved bits set\n"); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int is_good_ss_cap(struct usbtest_dev *tdev, u8 *buf) |
| { |
| struct usb_ss_cap_descriptor *ss; |
| |
| ss = (struct usb_ss_cap_descriptor *) buf; |
| |
| if (ss->bLength != USB_DT_USB_SS_CAP_SIZE) { |
| ERROR(tdev, "bogus superspeed device capability descriptor length\n"); |
| return 0; |
| } |
| |
| /* |
| * only bit[1] of bmAttributes is used for LTM and others are |
| * reserved |
| */ |
| if (ss->bmAttributes & ~0x02) { /* reserved == 0 */ |
| ERROR(tdev, "reserved bits set in bmAttributes\n"); |
| return 0; |
| } |
| |
| /* bits[0:3] of wSpeedSupported is used and others are reserved */ |
| if (le16_to_cpu(ss->wSpeedSupported) & ~0x0f) { /* reserved == 0 */ |
| ERROR(tdev, "reserved bits set in wSpeedSupported\n"); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int is_good_con_id(struct usbtest_dev *tdev, u8 *buf) |
| { |
| struct usb_ss_container_id_descriptor *con_id; |
| |
| con_id = (struct usb_ss_container_id_descriptor *) buf; |
| |
| if (con_id->bLength != USB_DT_USB_SS_CONTN_ID_SIZE) { |
| ERROR(tdev, "bogus container id descriptor length\n"); |
| return 0; |
| } |
| |
| if (con_id->bReserved) { /* reserved == 0 */ |
| ERROR(tdev, "reserved bits set\n"); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| /* sanity test for standard requests working with usb_control_mesg() and some |
| * of the utility functions which use it. |
| * |
| * this doesn't test how endpoint halts behave or data toggles get set, since |
| * we won't do I/O to bulk/interrupt endpoints here (which is how to change |
| * halt or toggle). toggle testing is impractical without support from hcds. |
| * |
| * this avoids failing devices linux would normally work with, by not testing |
| * config/altsetting operations for devices that only support their defaults. |
| * such devices rarely support those needless operations. |
| * |
| * NOTE that since this is a sanity test, it's not examining boundary cases |
| * to see if usbcore, hcd, and device all behave right. such testing would |
| * involve varied read sizes and other operation sequences. |
| */ |
| static int ch9_postconfig(struct usbtest_dev *dev) |
| { |
| struct usb_interface *iface = dev->intf; |
| struct usb_device *udev = interface_to_usbdev(iface); |
| int i, alt, retval; |
| |
| /* [9.2.3] if there's more than one altsetting, we need to be able to |
| * set and get each one. mostly trusts the descriptors from usbcore. |
| */ |
| for (i = 0; i < iface->num_altsetting; i++) { |
| |
| /* 9.2.3 constrains the range here */ |
| alt = iface->altsetting[i].desc.bAlternateSetting; |
| if (alt < 0 || alt >= iface->num_altsetting) { |
| dev_err(&iface->dev, |
| "invalid alt [%d].bAltSetting = %d\n", |
| i, alt); |
| } |
| |
| /* [real world] get/set unimplemented if there's only one */ |
| if (realworld && iface->num_altsetting == 1) |
| continue; |
| |
| /* [9.4.10] set_interface */ |
| retval = set_altsetting(dev, alt); |
| if (retval) { |
| dev_err(&iface->dev, "can't set_interface = %d, %d\n", |
| alt, retval); |
| return retval; |
| } |
| |
| /* [9.4.4] get_interface always works */ |
| retval = get_altsetting(dev); |
| if (retval != alt) { |
| dev_err(&iface->dev, "get alt should be %d, was %d\n", |
| alt, retval); |
| return (retval < 0) ? retval : -EDOM; |
| } |
| |
| } |
| |
| /* [real world] get_config unimplemented if there's only one */ |
| if (!realworld || udev->descriptor.bNumConfigurations != 1) { |
| int expected = udev->actconfig->desc.bConfigurationValue; |
| |
| /* [9.4.2] get_configuration always works |
| * ... although some cheap devices (like one TI Hub I've got) |
| * won't return config descriptors except before set_config. |
| */ |
| retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), |
| USB_REQ_GET_CONFIGURATION, |
| USB_DIR_IN | USB_RECIP_DEVICE, |
| 0, 0, dev->buf, 1, USB_CTRL_GET_TIMEOUT); |
| if (retval != 1 || dev->buf[0] != expected) { |
| dev_err(&iface->dev, "get config --> %d %d (1 %d)\n", |
| retval, dev->buf[0], expected); |
| return (retval < 0) ? retval : -EDOM; |
| } |
| } |
| |
| /* there's always [9.4.3] a device descriptor [9.6.1] */ |
| retval = usb_get_descriptor(udev, USB_DT_DEVICE, 0, |
| dev->buf, sizeof(udev->descriptor)); |
| if (retval != sizeof(udev->descriptor)) { |
| dev_err(&iface->dev, "dev descriptor --> %d\n", retval); |
| return (retval < 0) ? retval : -EDOM; |
| } |
| |
| /* |
| * there's always [9.4.3] a bos device descriptor [9.6.2] in USB |
| * 3.0 spec |
| */ |
| if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0210) { |
| struct usb_bos_descriptor *bos = NULL; |
| struct usb_dev_cap_header *header = NULL; |
| unsigned total, num, length; |
| u8 *buf; |
| |
| retval = usb_get_descriptor(udev, USB_DT_BOS, 0, dev->buf, |
| sizeof(*udev->bos->desc)); |
| if (retval != sizeof(*udev->bos->desc)) { |
| dev_err(&iface->dev, "bos descriptor --> %d\n", retval); |
| return (retval < 0) ? retval : -EDOM; |
| } |
| |
| bos = (struct usb_bos_descriptor *)dev->buf; |
| total = le16_to_cpu(bos->wTotalLength); |
| num = bos->bNumDeviceCaps; |
| |
| if (total > TBUF_SIZE) |
| total = TBUF_SIZE; |
| |
| /* |
| * get generic device-level capability descriptors [9.6.2] |
| * in USB 3.0 spec |
| */ |
| retval = usb_get_descriptor(udev, USB_DT_BOS, 0, dev->buf, |
| total); |
| if (retval != total) { |
| dev_err(&iface->dev, "bos descriptor set --> %d\n", |
| retval); |
| return (retval < 0) ? retval : -EDOM; |
| } |
| |
| length = sizeof(*udev->bos->desc); |
| buf = dev->buf; |
| for (i = 0; i < num; i++) { |
| buf += length; |
| if (buf + sizeof(struct usb_dev_cap_header) > |
| dev->buf + total) |
| break; |
| |
| header = (struct usb_dev_cap_header *)buf; |
| length = header->bLength; |
| |
| if (header->bDescriptorType != |
| USB_DT_DEVICE_CAPABILITY) { |
| dev_warn(&udev->dev, "not device capability descriptor, skip\n"); |
| continue; |
| } |
| |
| switch (header->bDevCapabilityType) { |
| case USB_CAP_TYPE_EXT: |
| if (buf + USB_DT_USB_EXT_CAP_SIZE > |
| dev->buf + total || |
| !is_good_ext(dev, buf)) { |
| dev_err(&iface->dev, "bogus usb 2.0 extension descriptor\n"); |
| return -EDOM; |
| } |
| break; |
| case USB_SS_CAP_TYPE: |
| if (buf + USB_DT_USB_SS_CAP_SIZE > |
| dev->buf + total || |
| !is_good_ss_cap(dev, buf)) { |
| dev_err(&iface->dev, "bogus superspeed device capability descriptor\n"); |
| return -EDOM; |
| } |
| break; |
| case CONTAINER_ID_TYPE: |
| if (buf + USB_DT_USB_SS_CONTN_ID_SIZE > |
| dev->buf + total || |
| !is_good_con_id(dev, buf)) { |
| dev_err(&iface->dev, "bogus container id descriptor\n"); |
| return -EDOM; |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| } |
| |
| /* there's always [9.4.3] at least one config descriptor [9.6.3] */ |
| for (i = 0; i < udev->descriptor.bNumConfigurations; i++) { |
| retval = usb_get_descriptor(udev, USB_DT_CONFIG, i, |
| dev->buf, TBUF_SIZE); |
| if (!is_good_config(dev, retval)) { |
| dev_err(&iface->dev, |
| "config [%d] descriptor --> %d\n", |
| i, retval); |
| return (retval < 0) ? retval : -EDOM; |
| } |
| |
| /* FIXME cross-checking udev->config[i] to make sure usbcore |
| * parsed it right (etc) would be good testing paranoia |
| */ |
| } |
| |
| /* and sometimes [9.2.6.6] speed dependent descriptors */ |
| if (le16_to_cpu(udev->descriptor.bcdUSB) == 0x0200) { |
| struct usb_qualifier_descriptor *d = NULL; |
| |
| /* device qualifier [9.6.2] */ |
| retval = usb_get_descriptor(udev, |
| USB_DT_DEVICE_QUALIFIER, 0, dev->buf, |
| sizeof(struct usb_qualifier_descriptor)); |
| if (retval == -EPIPE) { |
| if (udev->speed == USB_SPEED_HIGH) { |
| dev_err(&iface->dev, |
| "hs dev qualifier --> %d\n", |
| retval); |
| return retval; |
| } |
| /* usb2.0 but not high-speed capable; fine */ |
| } else if (retval != sizeof(struct usb_qualifier_descriptor)) { |
| dev_err(&iface->dev, "dev qualifier --> %d\n", retval); |
| return (retval < 0) ? retval : -EDOM; |
| } else |
| d = (struct usb_qualifier_descriptor *) dev->buf; |
| |
| /* might not have [9.6.2] any other-speed configs [9.6.4] */ |
| if (d) { |
| unsigned max = d->bNumConfigurations; |
| for (i = 0; i < max; i++) { |
| retval = usb_get_descriptor(udev, |
| USB_DT_OTHER_SPEED_CONFIG, i, |
| dev->buf, TBUF_SIZE); |
| if (!is_good_config(dev, retval)) { |
| dev_err(&iface->dev, |
| "other speed config --> %d\n", |
| retval); |
| return (retval < 0) ? retval : -EDOM; |
| } |
| } |
| } |
| } |
| /* FIXME fetch strings from at least the device descriptor */ |
| |
| /* [9.4.5] get_status always works */ |
| retval = usb_get_std_status(udev, USB_RECIP_DEVICE, 0, dev->buf); |
| if (retval) { |
| dev_err(&iface->dev, "get dev status --> %d\n", retval); |
| return retval; |
| } |
| |
| /* FIXME configuration.bmAttributes says if we could try to set/clear |
| * the device's remote wakeup feature ... if we can, test that here |
| */ |
| |
| retval = usb_get_std_status(udev, USB_RECIP_INTERFACE, |
| iface->altsetting[0].desc.bInterfaceNumber, dev->buf); |
| if (retval) { |
| dev_err(&iface->dev, "get interface status --> %d\n", retval); |
| return retval; |
| } |
| /* FIXME get status for each endpoint in the interface */ |
| |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* use ch9 requests to test whether: |
| * (a) queues work for control, keeping N subtests queued and |
| * active (auto-resubmit) for M loops through the queue. |
| * (b) protocol stalls (control-only) will autorecover. |
| * it's not like bulk/intr; no halt clearing. |
| * (c) short control reads are reported and handled. |
| * (d) queues are always processed in-order |
| */ |
| |
| struct ctrl_ctx { |
| spinlock_t lock; |
| struct usbtest_dev *dev; |
| struct completion complete; |
| unsigned count; |
| unsigned pending; |
| int status; |
| struct urb **urb; |
| struct usbtest_param_32 *param; |
| int last; |
| }; |
| |
| #define NUM_SUBCASES 16 /* how many test subcases here? */ |
| |
| struct subcase { |
| struct usb_ctrlrequest setup; |
| int number; |
| int expected; |
| }; |
| |
| static void ctrl_complete(struct urb *urb) |
| { |
| struct ctrl_ctx *ctx = urb->context; |
| struct usb_ctrlrequest *reqp; |
| struct subcase *subcase; |
| int status = urb->status; |
| |
| reqp = (struct usb_ctrlrequest *)urb->setup_packet; |
| subcase = container_of(reqp, struct subcase, setup); |
| |
| spin_lock(&ctx->lock); |
| ctx->count--; |
| ctx->pending--; |
| |
| /* queue must transfer and complete in fifo order, unless |
| * usb_unlink_urb() is used to unlink something not at the |
| * physical queue head (not tested). |
| */ |
| if (subcase->number > 0) { |
| if ((subcase->number - ctx->last) != 1) { |
| ERROR(ctx->dev, |
| "subcase %d completed out of order, last %d\n", |
| subcase->number, ctx->last); |
| status = -EDOM; |
| ctx->last = subcase->number; |
| goto error; |
| } |
| } |
| ctx->last = subcase->number; |
| |
| /* succeed or fault in only one way? */ |
| if (status == subcase->expected) |
| status = 0; |
| |
| /* async unlink for cleanup? */ |
| else if (status != -ECONNRESET) { |
| |
| /* some faults are allowed, not required */ |
| if (subcase->expected > 0 && ( |
| ((status == -subcase->expected /* happened */ |
| || status == 0)))) /* didn't */ |
| status = 0; |
| /* sometimes more than one fault is allowed */ |
| else if (subcase->number == 12 && status == -EPIPE) |
| status = 0; |
| else |
| ERROR(ctx->dev, "subtest %d error, status %d\n", |
| subcase->number, status); |
| } |
| |
| /* unexpected status codes mean errors; ideally, in hardware */ |
| if (status) { |
| error: |
| if (ctx->status == 0) { |
| int i; |
| |
| ctx->status = status; |
| ERROR(ctx->dev, "control queue %02x.%02x, err %d, " |
| "%d left, subcase %d, len %d/%d\n", |
| reqp->bRequestType, reqp->bRequest, |
| status, ctx->count, subcase->number, |
| urb->actual_length, |
| urb->transfer_buffer_length); |
| |
| /* FIXME this "unlink everything" exit route should |
| * be a separate test case. |
| */ |
| |
| /* unlink whatever's still pending */ |
| for (i = 1; i < ctx->param->sglen; i++) { |
| struct urb *u = ctx->urb[ |
| (i + subcase->number) |
| % ctx->param->sglen]; |
| |
| if (u == urb || !u->dev) |
| continue; |
| spin_unlock(&ctx->lock); |
| status = usb_unlink_urb(u); |
| spin_lock(&ctx->lock); |
| switch (status) { |
| case -EINPROGRESS: |
| case -EBUSY: |
| case -EIDRM: |
| continue; |
| default: |
| ERROR(ctx->dev, "urb unlink --> %d\n", |
| status); |
| } |
| } |
| status = ctx->status; |
| } |
| } |
| |
| /* resubmit if we need to, else mark this as done */ |
| if ((status == 0) && (ctx->pending < ctx->count)) { |
| status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (status != 0) { |
| ERROR(ctx->dev, |
| "can't resubmit ctrl %02x.%02x, err %d\n", |
| reqp->bRequestType, reqp->bRequest, status); |
| urb->dev = NULL; |
| } else |
| ctx->pending++; |
| } else |
| urb->dev = NULL; |
| |
| /* signal completion when nothing's queued */ |
| if (ctx->pending == 0) |
| complete(&ctx->complete); |
| spin_unlock(&ctx->lock); |
| } |
| |
| static int |
| test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param) |
| { |
| struct usb_device *udev = testdev_to_usbdev(dev); |
| struct urb **urb; |
| struct ctrl_ctx context; |
| int i; |
| |
| if (param->sglen == 0 || param->iterations > UINT_MAX / param->sglen) |
| return -EOPNOTSUPP; |
| |
| spin_lock_init(&context.lock); |
| context.dev = dev; |
| init_completion(&context.complete); |
| context.count = param->sglen * param->iterations; |
| context.pending = 0; |
| context.status = -ENOMEM; |
| context.param = param; |
| context.last = -1; |
| |
| /* allocate and init the urbs we'll queue. |
| * as with bulk/intr sglists, sglen is the queue depth; it also |
| * controls which subtests run (more tests than sglen) or rerun. |
| */ |
| urb = kcalloc(param->sglen, sizeof(struct urb *), GFP_KERNEL); |
| if (!urb) |
| return -ENOMEM; |
| for (i = 0; i < param->sglen; i++) { |
| int pipe = usb_rcvctrlpipe(udev, 0); |
| unsigned len; |
| struct urb *u; |
| struct usb_ctrlrequest req; |
| struct subcase *reqp; |
| |
| /* sign of this variable means: |
| * -: tested code must return this (negative) error code |
| * +: tested code may return this (negative too) error code |
| */ |
| int expected = 0; |
| |
| /* requests here are mostly expected to succeed on any |
| * device, but some are chosen to trigger protocol stalls |
| * or short reads. |
| */ |
| memset(&req, 0, sizeof(req)); |
| req.bRequest = USB_REQ_GET_DESCRIPTOR; |
| req.bRequestType = USB_DIR_IN|USB_RECIP_DEVICE; |
| |
| switch (i % NUM_SUBCASES) { |
| case 0: /* get device descriptor */ |
| req.wValue = cpu_to_le16(USB_DT_DEVICE << 8); |
| len = sizeof(struct usb_device_descriptor); |
| break; |
| case 1: /* get first config descriptor (only) */ |
| req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0); |
| len = sizeof(struct usb_config_descriptor); |
| break; |
| case 2: /* get altsetting (OFTEN STALLS) */ |
| req.bRequest = USB_REQ_GET_INTERFACE; |
| req.bRequestType = USB_DIR_IN|USB_RECIP_INTERFACE; |
| /* index = 0 means first interface */ |
| len = 1; |
| expected = EPIPE; |
| break; |
| case 3: /* get interface status */ |
| req.bRequest = USB_REQ_GET_STATUS; |
| req.bRequestType = USB_DIR_IN|USB_RECIP_INTERFACE; |
| /* interface 0 */ |
| len = 2; |
| break; |
| case 4: /* get device status */ |
| req.bRequest = USB_REQ_GET_STATUS; |
| req.bRequestType = USB_DIR_IN|USB_RECIP_DEVICE; |
| len = 2; |
| break; |
| case 5: /* get device qualifier (MAY STALL) */ |
| req.wValue = cpu_to_le16 (USB_DT_DEVICE_QUALIFIER << 8); |
| len = sizeof(struct usb_qualifier_descriptor); |
| if (udev->speed != USB_SPEED_HIGH) |
| expected = EPIPE; |
| break; |
| case 6: /* get first config descriptor, plus interface */ |
| req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0); |
| len = sizeof(struct usb_config_descriptor); |
| len += sizeof(struct usb_interface_descriptor); |
| break; |
| case 7: /* get interface descriptor (ALWAYS STALLS) */ |
| req.wValue = cpu_to_le16 (USB_DT_INTERFACE << 8); |
| /* interface == 0 */ |
| len = sizeof(struct usb_interface_descriptor); |
| expected = -EPIPE; |
| break; |
| /* NOTE: two consecutive stalls in the queue here. |
| * that tests fault recovery a bit more aggressively. */ |
| case 8: /* clear endpoint halt (MAY STALL) */ |
| req.bRequest = USB_REQ_CLEAR_FEATURE; |
| req.bRequestType = USB_RECIP_ENDPOINT; |
| /* wValue 0 == ep halt */ |
| /* wIndex 0 == ep0 (shouldn't halt!) */ |
| len = 0; |
| pipe = usb_sndctrlpipe(udev, 0); |
| expected = EPIPE; |
| break; |
| case 9: /* get endpoint status */ |
| req.bRequest = USB_REQ_GET_STATUS; |
| req.bRequestType = USB_DIR_IN|USB_RECIP_ENDPOINT; |
| /* endpoint 0 */ |
| len = 2; |
| break; |
| case 10: /* trigger short read (EREMOTEIO) */ |
| req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0); |
| len = 1024; |
| expected = -EREMOTEIO; |
| break; |
| /* NOTE: two consecutive _different_ faults in the queue. */ |
| case 11: /* get endpoint descriptor (ALWAYS STALLS) */ |
| req.wValue = cpu_to_le16(USB_DT_ENDPOINT << 8); |
| /* endpoint == 0 */ |
| len = sizeof(struct usb_interface_descriptor); |
| expected = EPIPE; |
| break; |
| /* NOTE: sometimes even a third fault in the queue! */ |
| case 12: /* get string 0 descriptor (MAY STALL) */ |
| req.wValue = cpu_to_le16(USB_DT_STRING << 8); |
| /* string == 0, for language IDs */ |
| len = sizeof(struct usb_interface_descriptor); |
| /* may succeed when > 4 languages */ |
| expected = EREMOTEIO; /* or EPIPE, if no strings */ |
| break; |
| case 13: /* short read, resembling case 10 */ |
| req.wValue = cpu_to_le16((USB_DT_CONFIG << 8) | 0); |
| /* last data packet "should" be DATA1, not DATA0 */ |
| if (udev->speed == USB_SPEED_SUPER) |
| len = 1024 - 512; |
| else |
| len = 1024 - udev->descriptor.bMaxPacketSize0; |
| expected = -EREMOTEIO; |
| break; |
| case 14: /* short read; try to fill the last packet */ |
| req.wValue = cpu_to_le16((USB_DT_DEVICE << 8) | 0); |
| /* device descriptor size == 18 bytes */ |
| len = udev->descriptor.bMaxPacketSize0; |
| if (udev->speed == USB_SPEED_SUPER) |
| len = 512; |
| switch (len) { |
| case 8: |
| len = 24; |
| break; |
| case 16: |
| len = 32; |
| break; |
| } |
| expected = -EREMOTEIO; |
| break; |
| case 15: |
| req.wValue = cpu_to_le16(USB_DT_BOS << 8); |
| if (udev->bos) |
| len = le16_to_cpu(udev->bos->desc->wTotalLength); |
| else |
| len = sizeof(struct usb_bos_descriptor); |
| if (le16_to_cpu(udev->descriptor.bcdUSB) < 0x0201) |
| expected = -EPIPE; |
| break; |
| default: |
| ERROR(dev, "bogus number of ctrl queue testcases!\n"); |
| context.status = -EINVAL; |
| goto cleanup; |
| } |
| req.wLength = cpu_to_le16(len); |
| urb[i] = u = simple_alloc_urb(udev, pipe, len, 0); |
| if (!u) |
| goto cleanup; |
| |
| reqp = kmalloc(sizeof(*reqp), GFP_KERNEL); |
| if (!reqp) |
| goto cleanup; |
| reqp->setup = req; |
| reqp->number = i % NUM_SUBCASES; |
| reqp->expected = expected; |
| u->setup_packet = (char *) &reqp->setup; |
| |
| u->context = &context; |
| u->complete = ctrl_complete; |
| } |
| |
| /* queue the urbs */ |
| context.urb = urb; |
| spin_lock_irq(&context.lock); |
| for (i = 0; i < param->sglen; i++) { |
| context.status = usb_submit_urb(urb[i], GFP_ATOMIC); |
| if (context.status != 0) { |
| ERROR(dev, "can't submit urb[%d], status %d\n", |
| i, context.status); |
| context.count = context.pending; |
| break; |
| } |
| context.pending++; |
| } |
| spin_unlock_irq(&context.lock); |
| |
| /* FIXME set timer and time out; provide a disconnect hook */ |
| |
| /* wait for the last one to complete */ |
| if (context.pending > 0) |
| wait_for_completion(&context.complete); |
| |
| cleanup: |
| for (i = 0; i < param->sglen; i++) { |
| if (!urb[i]) |
| continue; |
| urb[i]->dev = udev; |
| kfree(urb[i]->setup_packet); |
| simple_free_urb(urb[i]); |
| } |
| kfree(urb); |
| return context.status; |
| } |
| #undef NUM_SUBCASES |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void unlink1_callback(struct urb *urb) |
| { |
| int status = urb->status; |
| |
| /* we "know" -EPIPE (stall) never happens */ |
| if (!status) |
| status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (status) { |
| urb->status = status; |
| complete(urb->context); |
| } |
| } |
| |
| static int unlink1(struct usbtest_dev *dev, int pipe, int size, int async) |
| { |
| struct urb *urb; |
| struct completion completion; |
| int retval = 0; |
| |
| init_completion(&completion); |
| urb = simple_alloc_urb(testdev_to_usbdev(dev), pipe, size, 0); |
| if (!urb) |
| return -ENOMEM; |
| urb->context = &completion; |
| urb->complete = unlink1_callback; |
| |
| if (usb_pipeout(urb->pipe)) { |
| simple_fill_buf(urb); |
| urb->transfer_flags |= URB_ZERO_PACKET; |
| } |
| |
| /* keep the endpoint busy. there are lots of hc/hcd-internal |
| * states, and testing should get to all of them over time. |
| * |
| * FIXME want additional tests for when endpoint is STALLing |
| * due to errors, or is just NAKing requests. |
| */ |
| retval = usb_submit_urb(urb, GFP_KERNEL); |
| if (retval != 0) { |
| dev_err(&dev->intf->dev, "submit fail %d\n", retval); |
| return retval; |
| } |
| |
| /* unlinking that should always work. variable delay tests more |
| * hcd states and code paths, even with little other system load. |
| */ |
| msleep(jiffies % (2 * INTERRUPT_RATE)); |
| if (async) { |
| while (!completion_done(&completion)) { |
| retval = usb_unlink_urb(urb); |
| |
| if (retval == 0 && usb_pipein(urb->pipe)) |
| retval = simple_check_buf(dev, urb); |
| |
| switch (retval) { |
| case -EBUSY: |
| case -EIDRM: |
| /* we can't unlink urbs while they're completing |
| * or if they've completed, and we haven't |
| * resubmitted. "normal" drivers would prevent |
| * resubmission, but since we're testing unlink |
| * paths, we can't. |
| */ |
| ERROR(dev, "unlink retry\n"); |
| continue; |
| case 0: |
| case -EINPROGRESS: |
| break; |
| |
| default: |
| dev_err(&dev->intf->dev, |
| "unlink fail %d\n", retval); |
| return retval; |
| } |
| |
| break; |
| } |
| } else |
| usb_kill_urb(urb); |
| |
| wait_for_completion(&completion); |
| retval = urb->status; |
| simple_free_urb(urb); |
| |
| if (async) |
| return (retval == -ECONNRESET) ? 0 : retval - 1000; |
| else |
| return (retval == -ENOENT || retval == -EPERM) ? |
| 0 : retval - 2000; |
| } |
| |
| static int unlink_simple(struct usbtest_dev *dev, int pipe, int len) |
| { |
| int retval = 0; |
| |
| /* test sync and async paths */ |
| retval = unlink1(dev, pipe, len, 1); |
| if (!retval) |
| retval = unlink1(dev, pipe, len, 0); |
| return retval; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| struct queued_ctx { |
| struct completion complete; |
| atomic_t pending; |
| unsigned num; |
| int status; |
| struct urb **urbs; |
| }; |
| |
| static void unlink_queued_callback(struct urb *urb) |
| { |
| int status = urb->status; |
| struct queued_ctx *ctx = urb->context; |
| |
| if (ctx->status) |
| goto done; |
| if (urb == ctx->urbs[ctx->num - 4] || urb == ctx->urbs[ctx->num - 2]) { |
| if (status == -ECONNRESET) |
| goto done; |
| /* What error should we report if the URB completed normally? */ |
| } |
| if (status != 0) |
| ctx->status = status; |
| |
| done: |
| if (atomic_dec_and_test(&ctx->pending)) |
| complete(&ctx->complete); |
| } |
| |
| static int unlink_queued(struct usbtest_dev *dev, int pipe, unsigned num, |
| unsigned size) |
| { |
| struct queued_ctx ctx; |
| struct usb_device *udev = testdev_to_usbdev(dev); |
| void *buf; |
| dma_addr_t buf_dma; |
| int i; |
| int retval = -ENOMEM; |
| |
| init_completion(&ctx.complete); |
| atomic_set(&ctx.pending, 1); /* One more than the actual value */ |
| ctx.num = num; |
| ctx.status = 0; |
| |
| buf = usb_alloc_coherent(udev, size, GFP_KERNEL, &buf_dma); |
| if (!buf) |
| return retval; |
| memset(buf, 0, size); |
| |
| /* Allocate and init the urbs we'll queue */ |
| ctx.urbs = kcalloc(num, sizeof(struct urb *), GFP_KERNEL); |
| if (!ctx.urbs) |
| goto free_buf; |
| for (i = 0; i < num; i++) { |
| ctx.urbs[i] = usb_alloc_urb(0, GFP_KERNEL); |
| if (!ctx.urbs[i]) |
| goto free_urbs; |
| usb_fill_bulk_urb(ctx.urbs[i], udev, pipe, buf, size, |
| unlink_queued_callback, &ctx); |
| ctx.urbs[i]->transfer_dma = buf_dma; |
| ctx.urbs[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP; |
| |
| if (usb_pipeout(ctx.urbs[i]->pipe)) { |
| simple_fill_buf(ctx.urbs[i]); |
| ctx.urbs[i]->transfer_flags |= URB_ZERO_PACKET; |
| } |
| } |
| |
| /* Submit all the URBs and then unlink URBs num - 4 and num - 2. */ |
| for (i = 0; i < num; i++) { |
| atomic_inc(&ctx.pending); |
| retval = usb_submit_urb(ctx.urbs[i], GFP_KERNEL); |
| if (retval != 0) { |
| dev_err(&dev->intf->dev, "submit urbs[%d] fail %d\n", |
| i, retval); |
| atomic_dec(&ctx.pending); |
| ctx.status = retval; |
| break; |
| } |
| } |
| if (i == num) { |
| usb_unlink_urb(ctx.urbs[num - 4]); |
| usb_unlink_urb(ctx.urbs[num - 2]); |
| } else { |
| while (--i >= 0) |
| usb_unlink_urb(ctx.urbs[i]); |
| } |
| |
| if (atomic_dec_and_test(&ctx.pending)) /* The extra count */ |
| complete(&ctx.complete); |
| wait_for_completion(&ctx.complete); |
| retval = ctx.status; |
| |
| free_urbs: |
| for (i = 0; i < num; i++) |
| usb_free_urb(ctx.urbs[i]); |
| kfree(ctx.urbs); |
| free_buf: |
| usb_free_coherent(udev, size, buf, buf_dma); |
| return retval; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int verify_not_halted(struct usbtest_dev *tdev, int ep, struct urb *urb) |
| { |
| int retval; |
| u16 status; |
| |
| /* shouldn't look or act halted */ |
| retval = usb_get_std_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status); |
| if (retval < 0) { |
| ERROR(tdev, "ep %02x couldn't get no-halt status, %d\n", |
| ep, retval); |
| return retval; |
| } |
| if (status != 0) { |
| ERROR(tdev, "ep %02x bogus status: %04x != 0\n", ep, status); |
| return -EINVAL; |
| } |
| retval = simple_io(tdev, urb, 1, 0, 0, __func__); |
| if (retval != 0) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static int verify_halted(struct usbtest_dev *tdev, int ep, struct urb *urb) |
| { |
| int retval; |
| u16 status; |
| |
| /* should look and act halted */ |
| retval = usb_get_std_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status); |
| if (retval < 0) { |
| ERROR(tdev, "ep %02x couldn't get halt status, %d\n", |
| ep, retval); |
| return retval; |
| } |
| if (status != 1) { |
| ERROR(tdev, "ep %02x bogus status: %04x != 1\n", ep, status); |
| return -EINVAL; |
| } |
| retval = simple_io(tdev, urb, 1, 0, -EPIPE, __func__); |
| if (retval != -EPIPE) |
| return -EINVAL; |
| retval = simple_io(tdev, urb, 1, 0, -EPIPE, "verify_still_halted"); |
| if (retval != -EPIPE) |
| return -EINVAL; |
| return 0; |
| } |
| |
| static int test_halt(struct usbtest_dev *tdev, int ep, struct urb *urb) |
| { |
| int retval; |
| |
| /* shouldn't look or act halted now */ |
| retval = verify_not_halted(tdev, ep, urb); |
| if (retval < 0) |
| return retval; |
| |
| /* set halt (protocol test only), verify it worked */ |
| retval = usb_control_msg(urb->dev, usb_sndctrlpipe(urb->dev, 0), |
| USB_REQ_SET_FEATURE, USB_RECIP_ENDPOINT, |
| USB_ENDPOINT_HALT, ep, |
| NULL, 0, USB_CTRL_SET_TIMEOUT); |
| if (retval < 0) { |
| ERROR(tdev, "ep %02x couldn't set halt, %d\n", ep, retval); |
| return retval; |
| } |
| retval = verify_halted(tdev, ep, urb); |
| if (retval < 0) { |
| int ret; |
| |
| /* clear halt anyways, else further tests will fail */ |
| ret = usb_clear_halt(urb->dev, urb->pipe); |
| if (ret) |
| ERROR(tdev, "ep %02x couldn't clear halt, %d\n", |
| ep, ret); |
| |
| return retval; |
| } |
| |
| /* clear halt (tests API + protocol), verify it worked */ |
| retval = usb_clear_halt(urb->dev, urb->pipe); |
| if (retval < 0) { |
| ERROR(tdev, "ep %02x couldn't clear halt, %d\n", ep, retval); |
| return retval; |
| } |
| retval = verify_not_halted(tdev, ep, urb); |
| if (retval < 0) |
| return retval; |
| |
| /* NOTE: could also verify SET_INTERFACE clear halts ... */ |
| |
| return 0; |
| } |
| |
| static int halt_simple(struct usbtest_dev *dev) |
| { |
| int ep; |
| int retval = 0; |
| struct urb *urb; |
| struct usb_device *udev = testdev_to_usbdev(dev); |
| |
| if (udev->speed == USB_SPEED_SUPER) |
| urb = simple_alloc_urb(udev, 0, 1024, 0); |
| else |
| urb = simple_alloc_urb(udev, 0, 512, 0); |
| if (urb == NULL) |
| return -ENOMEM; |
| |
| if (dev->in_pipe) { |
| ep = usb_pipeendpoint(dev->in_pipe) | USB_DIR_IN; |
| urb->pipe = dev->in_pipe; |
| retval = test_halt(dev, ep, urb); |
| if (retval < 0) |
| goto done; |
| } |
| |
| if (dev->out_pipe) { |
| ep = usb_pipeendpoint(dev->out_pipe); |
| urb->pipe = dev->out_pipe; |
| retval = test_halt(dev, ep, urb); |
| } |
| done: |
| simple_free_urb(urb); |
| return retval; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* Control OUT tests use the vendor control requests from Intel's |
| * USB 2.0 compliance test device: write a buffer, read it back. |
| * |
| * Intel's spec only _requires_ that it work for one packet, which |
| * is pretty weak. Some HCDs place limits here; most devices will |
| * need to be able to handle more than one OUT data packet. We'll |
| * try whatever we're told to try. |
| */ |
| static int ctrl_out(struct usbtest_dev *dev, |
| unsigned count, unsigned length, unsigned vary, unsigned offset) |
| { |
| unsigned i, j, len; |
| int retval; |
| u8 *buf; |
| char *what = "?"; |
| struct usb_device *udev; |
| |
| if (length < 1 || length > 0xffff || vary >= length) |
| return -EINVAL; |
| |
| buf = kmalloc(length + offset, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| buf += offset; |
| udev = testdev_to_usbdev(dev); |
| len = length; |
| retval = 0; |
| |
| /* NOTE: hardware might well act differently if we pushed it |
| * with lots back-to-back queued requests. |
| */ |
| for (i = 0; i < count; i++) { |
| /* write patterned data */ |
| for (j = 0; j < len; j++) |
| buf[j] = (u8)(i + j); |
| retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), |
| 0x5b, USB_DIR_OUT|USB_TYPE_VENDOR, |
| 0, 0, buf, len, USB_CTRL_SET_TIMEOUT); |
| if (retval != len) { |
| what = "write"; |
| if (retval >= 0) { |
| ERROR(dev, "ctrl_out, wlen %d (expected %d)\n", |
| retval, len); |
| retval = -EBADMSG; |
| } |
| break; |
| } |
| |
| /* read it back -- assuming nothing intervened!! */ |
| retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), |
| 0x5c, USB_DIR_IN|USB_TYPE_VENDOR, |
| 0, 0, buf, len, USB_CTRL_GET_TIMEOUT); |
| if (retval != len) { |
| what = "read"; |
| if (retval >= 0) { |
| ERROR(dev, "ctrl_out, rlen %d (expected %d)\n", |
| retval, len); |
| retval = -EBADMSG; |
| } |
| break; |
| } |
| |
| /* fail if we can't verify */ |
| for (j = 0; j < len; j++) { |
| if (buf[j] != (u8)(i + j)) { |
| ERROR(dev, "ctrl_out, byte %d is %d not %d\n", |
| j, buf[j], (u8)(i + j)); |
| retval = -EBADMSG; |
| break; |
| } |
| } |
| if (retval < 0) { |
| what = "verify"; |
| break; |
| } |
| |
| len += vary; |
| |
| /* [real world] the "zero bytes IN" case isn't really used. |
| * hardware can easily trip up in this weird case, since its |
| * status stage is IN, not OUT like other ep0in transfers. |
| */ |
| if (len > length) |
| len = realworld ? 1 : 0; |
| } |
| |
| if (retval < 0) |
| ERROR(dev, "ctrl_out %s failed, code %d, count %d\n", |
| what, retval, i); |
| |
| kfree(buf - offset); |
| return retval; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* ISO/BULK tests ... mimics common usage |
| * - buffer length is split into N packets (mostly maxpacket sized) |
| * - multi-buffers according to sglen |
| */ |
| |
| struct transfer_context { |
| unsigned count; |
| unsigned pending; |
| spinlock_t lock; |
| struct completion done; |
| int submit_error; |
| unsigned long errors; |
| unsigned long packet_count; |
| struct usbtest_dev *dev; |
| bool is_iso; |
| }; |
| |
| static void complicated_callback(struct urb *urb) |
| { |
| struct transfer_context *ctx = urb->context; |
| |
| spin_lock(&ctx->lock); |
| ctx->count--; |
| |
| ctx->packet_count += urb->number_of_packets; |
| if (urb->error_count > 0) |
| ctx->errors += urb->error_count; |
| else if (urb->status != 0) |
| ctx->errors += (ctx->is_iso ? urb->number_of_packets : 1); |
| else if (urb->actual_length != urb->transfer_buffer_length) |
| ctx->errors++; |
| else if (check_guard_bytes(ctx->dev, urb) != 0) |
| ctx->errors++; |
| |
| if (urb->status == 0 && ctx->count > (ctx->pending - 1) |
| && !ctx->submit_error) { |
| int status = usb_submit_urb(urb, GFP_ATOMIC); |
| switch (status) { |
| case 0: |
| goto done; |
| default: |
| dev_err(&ctx->dev->intf->dev, |
| "resubmit err %d\n", |
| status); |
| /* FALLTHROUGH */ |
| case -ENODEV: /* disconnected */ |
| case -ESHUTDOWN: /* endpoint disabled */ |
| ctx->submit_error = 1; |
| break; |
| } |
| } |
| |
| ctx->pending--; |
| if (ctx->pending == 0) { |
| if (ctx->errors) |
| dev_err(&ctx->dev->intf->dev, |
| "during the test, %lu errors out of %lu\n", |
| ctx->errors, ctx->packet_count); |
| complete(&ctx->done); |
| } |
| done: |
| spin_unlock(&ctx->lock); |
| } |
| |
| static struct urb *iso_alloc_urb( |
| struct usb_device *udev, |
| int pipe, |
| struct usb_endpoint_descriptor *desc, |
| long bytes, |
| unsigned offset |
| ) |
| { |
| struct urb *urb; |
| unsigned i, maxp, packets; |
| |
| if (bytes < 0 || !desc) |
| return NULL; |
| maxp = usb_endpoint_maxp(desc); |
| maxp *= usb_endpoint_maxp_mult(desc); |
| packets = DIV_ROUND_UP(bytes, maxp); |
| |
| urb = usb_alloc_urb(packets, GFP_KERNEL); |
| if (!urb) |
| return urb; |
| urb->dev = udev; |
| urb->pipe = pipe; |
| |
| urb->number_of_packets = packets; |
| urb->transfer_buffer_length = bytes; |
| urb->transfer_buffer = usb_alloc_coherent(udev, bytes + offset, |
| GFP_KERNEL, |
| &urb->transfer_dma); |
| if (!urb->transfer_buffer) { |
| usb_free_urb(urb); |
| return NULL; |
| } |
| if (offset) { |
| memset(urb->transfer_buffer, GUARD_BYTE, offset); |
| urb->transfer_buffer += offset; |
| urb->transfer_dma += offset; |
| } |
| /* For inbound transfers use guard byte so that test fails if |
| data not correctly copied */ |
| memset(urb->transfer_buffer, |
| usb_pipein(urb->pipe) ? GUARD_BYTE : 0, |
| bytes); |
| |
| for (i = 0; i < packets; i++) { |
| /* here, only the last packet will be short */ |
| urb->iso_frame_desc[i].length = min((unsigned) bytes, maxp); |
| bytes -= urb->iso_frame_desc[i].length; |
| |
| urb->iso_frame_desc[i].offset = maxp * i; |
| } |
| |
| urb->complete = complicated_callback; |
| /* urb->context = SET BY CALLER */ |
| urb->interval = 1 << (desc->bInterval - 1); |
| urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; |
| return urb; |
| } |
| |
| static int |
| test_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param, |
| int pipe, struct usb_endpoint_descriptor *desc, unsigned offset) |
| { |
| struct transfer_context context; |
| struct usb_device *udev; |
| unsigned i; |
| unsigned long packets = 0; |
| int status = 0; |
| struct urb *urbs[param->sglen]; |
| |
| if (!param->sglen || param->iterations > UINT_MAX / param->sglen) |
| return -EINVAL; |
| |
| memset(&context, 0, sizeof(context)); |
| context.count = param->iterations * param->sglen; |
| context.dev = dev; |
| context.is_iso = !!desc; |
| init_completion(&context.done); |
| spin_lock_init(&context.lock); |
| |
| udev = testdev_to_usbdev(dev); |
| |
| for (i = 0; i < param->sglen; i++) { |
| if (context.is_iso) |
| urbs[i] = iso_alloc_urb(udev, pipe, desc, |
| param->length, offset); |
| else |
| urbs[i] = complicated_alloc_urb(udev, pipe, |
| param->length, 0); |
| |
| if (!urbs[i]) { |
| status = -ENOMEM; |
| goto fail; |
| } |
| packets += urbs[i]->number_of_packets; |
| urbs[i]->context = &context; |
| } |
| packets *= param->iterations; |
| |
| if (context.is_iso) { |
| dev_info(&dev->intf->dev, |
| "iso period %d %sframes, wMaxPacket %d, transactions: %d\n", |
| 1 << (desc->bInterval - 1), |
| (udev->speed == USB_SPEED_HIGH) ? "micro" : "", |
| usb_endpoint_maxp(desc), |
| usb_endpoint_maxp_mult(desc)); |
| |
| dev_info(&dev->intf->dev, |
| "total %lu msec (%lu packets)\n", |
| (packets * (1 << (desc->bInterval - 1))) |
| / ((udev->speed == USB_SPEED_HIGH) ? 8 : 1), |
| packets); |
| } |
| |
| spin_lock_irq(&context.lock); |
| for (i = 0; i < param->sglen; i++) { |
| ++context.pending; |
| status = usb_submit_urb(urbs[i], GFP_ATOMIC); |
| if (status < 0) { |
| ERROR(dev, "submit iso[%d], error %d\n", i, status); |
| if (i == 0) { |
| spin_unlock_irq(&context.lock); |
| goto fail; |
| } |
| |
| simple_free_urb(urbs[i]); |
| urbs[i] = NULL; |
| context.pending--; |
| context.submit_error = 1; |
| break; |
| } |
| } |
| spin_unlock_irq(&context.lock); |
| |
| wait_for_completion(&context.done); |
| |
| for (i = 0; i < param->sglen; i++) { |
| if (urbs[i]) |
| simple_free_urb(urbs[i]); |
| } |
| /* |
| * Isochronous transfers are expected to fail sometimes. As an |
| * arbitrary limit, we will report an error if any submissions |
| * fail or if the transfer failure rate is > 10%. |
| */ |
| if (status != 0) |
| ; |
| else if (context.submit_error) |
| status = -EACCES; |
| else if (context.errors > |
| (context.is_iso ? context.packet_count / 10 : 0)) |
| status = -EIO; |
| return status; |
| |
| fail: |
| for (i = 0; i < param->sglen; i++) { |
| if (urbs[i]) |
| simple_free_urb(urbs[i]); |
| } |
| return status; |
| } |
| |
| static int test_unaligned_bulk( |
| struct usbtest_dev *tdev, |
| int pipe, |
| unsigned length, |
| int iterations, |
| unsigned transfer_flags, |
| const char *label) |
| { |
| int retval; |
| struct urb *urb = usbtest_alloc_urb(testdev_to_usbdev(tdev), |
| pipe, length, transfer_flags, 1, 0, simple_callback); |
| |
| if (!urb) |
| return -ENOMEM; |
| |
| retval = simple_io(tdev, urb, iterations, 0, 0, label); |
| simple_free_urb(urb); |
| return retval; |
| } |
| |
| /* Run tests. */ |
| static int |
| usbtest_do_ioctl(struct usb_interface *intf, struct usbtest_param_32 *param) |
| { |
| struct usbtest_dev *dev = usb_get_intfdata(intf); |
| struct usb_device *udev = testdev_to_usbdev(dev); |
| struct urb *urb; |
| struct scatterlist *sg; |
| struct usb_sg_request req; |
| unsigned i; |
| int retval = -EOPNOTSUPP; |
| |
| if (param->iterations <= 0) |
| return -EINVAL; |
| if (param->sglen > MAX_SGLEN) |
| return -EINVAL; |
| /* |
| * Just a bunch of test cases that every HCD is expected to handle. |
| * |
| * Some may need specific firmware, though it'd be good to have |
| * one firmware image to handle all the test cases. |
| * |
| * FIXME add more tests! cancel requests, verify the data, control |
| * queueing, concurrent read+write threads, and so on. |
| */ |
| switch (param->test_num) { |
| |
| case 0: |
| dev_info(&intf->dev, "TEST 0: NOP\n"); |
| retval = 0; |
| break; |
| |
| /* Simple non-queued bulk I/O tests */ |
| case 1: |
| if (dev->out_pipe == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 1: write %d bytes %u times\n", |
| param->length, param->iterations); |
| urb = simple_alloc_urb(udev, dev->out_pipe, param->length, 0); |
| if (!urb) { |
| retval = -ENOMEM; |
| break; |
| } |
| /* FIRMWARE: bulk sink (maybe accepts short writes) */ |
| retval = simple_io(dev, urb, param->iterations, 0, 0, "test1"); |
| simple_free_urb(urb); |
| break; |
| case 2: |
| if (dev->in_pipe == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 2: read %d bytes %u times\n", |
| param->length, param->iterations); |
| urb = simple_alloc_urb(udev, dev->in_pipe, param->length, 0); |
| if (!urb) { |
| retval = -ENOMEM; |
| break; |
| } |
| /* FIRMWARE: bulk source (maybe generates short writes) */ |
| retval = simple_io(dev, urb, param->iterations, 0, 0, "test2"); |
| simple_free_urb(urb); |
| break; |
| case 3: |
| if (dev->out_pipe == 0 || param->vary == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 3: write/%d 0..%d bytes %u times\n", |
| param->vary, param->length, param->iterations); |
| urb = simple_alloc_urb(udev, dev->out_pipe, param->length, 0); |
| if (!urb) { |
| retval = -ENOMEM; |
| break; |
| } |
| /* FIRMWARE: bulk sink (maybe accepts short writes) */ |
| retval = simple_io(dev, urb, param->iterations, param->vary, |
| 0, "test3"); |
| simple_free_urb(urb); |
| break; |
| case 4: |
| if (dev->in_pipe == 0 || param->vary == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 4: read/%d 0..%d bytes %u times\n", |
| param->vary, param->length, param->iterations); |
| urb = simple_alloc_urb(udev, dev->in_pipe, param->length, 0); |
| if (!urb) { |
| retval = -ENOMEM; |
| break; |
| } |
| /* FIRMWARE: bulk source (maybe generates short writes) */ |
| retval = simple_io(dev, urb, param->iterations, param->vary, |
| 0, "test4"); |
| simple_free_urb(urb); |
| break; |
| |
| /* Queued bulk I/O tests */ |
| case 5: |
| if (dev->out_pipe == 0 || param->sglen == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 5: write %d sglists %d entries of %d bytes\n", |
| param->iterations, |
| param->sglen, param->length); |
| sg = alloc_sglist(param->sglen, param->length, |
| 0, dev, dev->out_pipe); |
| if (!sg) { |
| retval = -ENOMEM; |
| break; |
| } |
| /* FIRMWARE: bulk sink (maybe accepts short writes) */ |
| retval = perform_sglist(dev, param->iterations, dev->out_pipe, |
| &req, sg, param->sglen); |
| free_sglist(sg, param->sglen); |
| break; |
| |
| case 6: |
| if (dev->in_pipe == 0 || param->sglen == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 6: read %d sglists %d entries of %d bytes\n", |
| param->iterations, |
| param->sglen, param->length); |
| sg = alloc_sglist(param->sglen, param->length, |
| 0, dev, dev->in_pipe); |
| if (!sg) { |
| retval = -ENOMEM; |
| break; |
| } |
| /* FIRMWARE: bulk source (maybe generates short writes) */ |
| retval = perform_sglist(dev, param->iterations, dev->in_pipe, |
| &req, sg, param->sglen); |
| free_sglist(sg, param->sglen); |
| break; |
| case 7: |
| if (dev->out_pipe == 0 || param->sglen == 0 || param->vary == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 7: write/%d %d sglists %d entries 0..%d bytes\n", |
| param->vary, param->iterations, |
| param->sglen, param->length); |
| sg = alloc_sglist(param->sglen, param->length, |
| param->vary, dev, dev->out_pipe); |
| if (!sg) { |
| retval = -ENOMEM; |
| break; |
| } |
| /* FIRMWARE: bulk sink (maybe accepts short writes) */ |
| retval = perform_sglist(dev, param->iterations, dev->out_pipe, |
| &req, sg, param->sglen); |
| free_sglist(sg, param->sglen); |
| break; |
| case 8: |
| if (dev->in_pipe == 0 || param->sglen == 0 || param->vary == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 8: read/%d %d sglists %d entries 0..%d bytes\n", |
| param->vary, param->iterations, |
| param->sglen, param->length); |
| sg = alloc_sglist(param->sglen, param->length, |
| param->vary, dev, dev->in_pipe); |
| if (!sg) { |
| retval = -ENOMEM; |
| break; |
| } |
| /* FIRMWARE: bulk source (maybe generates short writes) */ |
| retval = perform_sglist(dev, param->iterations, dev->in_pipe, |
| &req, sg, param->sglen); |
| free_sglist(sg, param->sglen); |
| break; |
| |
| /* non-queued sanity tests for control (chapter 9 subset) */ |
| case 9: |
| retval = 0; |
| dev_info(&intf->dev, |
| "TEST 9: ch9 (subset) control tests, %d times\n", |
| param->iterations); |
| for (i = param->iterations; retval == 0 && i--; /* NOP */) |
| retval = ch9_postconfig(dev); |
| if (retval) |
| dev_err(&intf->dev, "ch9 subset failed, " |
| "iterations left %d\n", i); |
| break; |
| |
| /* queued control messaging */ |
| case 10: |
| retval = 0; |
| dev_info(&intf->dev, |
| "TEST 10: queue %d control calls, %d times\n", |
| param->sglen, |
| param->iterations); |
| retval = test_ctrl_queue(dev, param); |
| break; |
| |
| /* simple non-queued unlinks (ring with one urb) */ |
| case 11: |
| if (dev->in_pipe == 0 || !param->length) |
| break; |
| retval = 0; |
| dev_info(&intf->dev, "TEST 11: unlink %d reads of %d\n", |
| param->iterations, param->length); |
| for (i = param->iterations; retval == 0 && i--; /* NOP */) |
| retval = unlink_simple(dev, dev->in_pipe, |
| param->length); |
| if (retval) |
| dev_err(&intf->dev, "unlink reads failed %d, " |
| "iterations left %d\n", retval, i); |
| break; |
| case 12: |
| if (dev->out_pipe == 0 || !param->length) |
| break; |
| retval = 0; |
| dev_info(&intf->dev, "TEST 12: unlink %d writes of %d\n", |
| param->iterations, param->length); |
| for (i = param->iterations; retval == 0 && i--; /* NOP */) |
| retval = unlink_simple(dev, dev->out_pipe, |
| param->length); |
| if (retval) |
| dev_err(&intf->dev, "unlink writes failed %d, " |
| "iterations left %d\n", retval, i); |
| break; |
| |
| /* ep halt tests */ |
| case 13: |
| if (dev->out_pipe == 0 && dev->in_pipe == 0) |
| break; |
| retval = 0; |
| dev_info(&intf->dev, "TEST 13: set/clear %d halts\n", |
| param->iterations); |
| for (i = param->iterations; retval == 0 && i--; /* NOP */) |
| retval = halt_simple(dev); |
| |
| if (retval) |
| ERROR(dev, "halts failed, iterations left %d\n", i); |
| break; |
| |
| /* control write tests */ |
| case 14: |
| if (!dev->info->ctrl_out) |
| break; |
| dev_info(&intf->dev, "TEST 14: %d ep0out, %d..%d vary %d\n", |
| param->iterations, |
| realworld ? 1 : 0, param->length, |
| param->vary); |
| retval = ctrl_out(dev, param->iterations, |
| param->length, param->vary, 0); |
| break; |
| |
| /* iso write tests */ |
| case 15: |
| if (dev->out_iso_pipe == 0 || param->sglen == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 15: write %d iso, %d entries of %d bytes\n", |
| param->iterations, |
| param->sglen, param->length); |
| /* FIRMWARE: iso sink */ |
| retval = test_queue(dev, param, |
| dev->out_iso_pipe, dev->iso_out, 0); |
| break; |
| |
| /* iso read tests */ |
| case 16: |
| if (dev->in_iso_pipe == 0 || param->sglen == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 16: read %d iso, %d entries of %d bytes\n", |
| param->iterations, |
| param->sglen, param->length); |
| /* FIRMWARE: iso source */ |
| retval = test_queue(dev, param, |
| dev->in_iso_pipe, dev->iso_in, 0); |
| break; |
| |
| /* FIXME scatterlist cancel (needs helper thread) */ |
| |
| /* Tests for bulk I/O using DMA mapping by core and odd address */ |
| case 17: |
| if (dev->out_pipe == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 17: write odd addr %d bytes %u times core map\n", |
| param->length, param->iterations); |
| |
| retval = test_unaligned_bulk( |
| dev, dev->out_pipe, |
| param->length, param->iterations, |
| 0, "test17"); |
| break; |
| |
| case 18: |
| if (dev->in_pipe == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 18: read odd addr %d bytes %u times core map\n", |
| param->length, param->iterations); |
| |
| retval = test_unaligned_bulk( |
| dev, dev->in_pipe, |
| param->length, param->iterations, |
| 0, "test18"); |
| break; |
| |
| /* Tests for bulk I/O using premapped coherent buffer and odd address */ |
| case 19: |
| if (dev->out_pipe == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 19: write odd addr %d bytes %u times premapped\n", |
| param->length, param->iterations); |
| |
| retval = test_unaligned_bulk( |
| dev, dev->out_pipe, |
| param->length, param->iterations, |
| URB_NO_TRANSFER_DMA_MAP, "test19"); |
| break; |
| |
| case 20: |
| if (dev->in_pipe == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 20: read odd addr %d bytes %u times premapped\n", |
| param->length, param->iterations); |
| |
| retval = test_unaligned_bulk( |
| dev, dev->in_pipe, |
| param->length, param->iterations, |
| URB_NO_TRANSFER_DMA_MAP, "test20"); |
| break; |
| |
| /* control write tests with unaligned buffer */ |
| case 21: |
| if (!dev->info->ctrl_out) |
| break; |
| dev_info(&intf->dev, |
| "TEST 21: %d ep0out odd addr, %d..%d vary %d\n", |
| param->iterations, |
| realworld ? 1 : 0, param->length, |
| param->vary); |
| retval = ctrl_out(dev, param->iterations, |
| param->length, param->vary, 1); |
| break; |
| |
| /* unaligned iso tests */ |
| case 22: |
| if (dev->out_iso_pipe == 0 || param->sglen == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 22: write %d iso odd, %d entries of %d bytes\n", |
| param->iterations, |
| param->sglen, param->length); |
| retval = test_queue(dev, param, |
| dev->out_iso_pipe, dev->iso_out, 1); |
| break; |
| |
| case 23: |
| if (dev->in_iso_pipe == 0 || param->sglen == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 23: read %d iso odd, %d entries of %d bytes\n", |
| param->iterations, |
| param->sglen, param->length); |
| retval = test_queue(dev, param, |
| dev->in_iso_pipe, dev->iso_in, 1); |
| break; |
| |
| /* unlink URBs from a bulk-OUT queue */ |
| case 24: |
| if (dev->out_pipe == 0 || !param->length || param->sglen < 4) |
| break; |
| retval = 0; |
| dev_info(&intf->dev, "TEST 24: unlink from %d queues of " |
| "%d %d-byte writes\n", |
| param->iterations, param->sglen, param->length); |
| for (i = param->iterations; retval == 0 && i > 0; --i) { |
| retval = unlink_queued(dev, dev->out_pipe, |
| param->sglen, param->length); |
| if (retval) { |
| dev_err(&intf->dev, |
| "unlink queued writes failed %d, " |
| "iterations left %d\n", retval, i); |
| break; |
| } |
| } |
| break; |
| |
| /* Simple non-queued interrupt I/O tests */ |
| case 25: |
| if (dev->out_int_pipe == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 25: write %d bytes %u times\n", |
| param->length, param->iterations); |
| urb = simple_alloc_urb(udev, dev->out_int_pipe, param->length, |
| dev->int_out->bInterval); |
| if (!urb) { |
| retval = -ENOMEM; |
| break; |
| } |
| /* FIRMWARE: interrupt sink (maybe accepts short writes) */ |
| retval = simple_io(dev, urb, param->iterations, 0, 0, "test25"); |
| simple_free_urb(urb); |
| break; |
| case 26: |
| if (dev->in_int_pipe == 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 26: read %d bytes %u times\n", |
| param->length, param->iterations); |
| urb = simple_alloc_urb(udev, dev->in_int_pipe, param->length, |
| dev->int_in->bInterval); |
| if (!urb) { |
| retval = -ENOMEM; |
| break; |
| } |
| /* FIRMWARE: interrupt source (maybe generates short writes) */ |
| retval = simple_io(dev, urb, param->iterations, 0, 0, "test26"); |
| simple_free_urb(urb); |
| break; |
| case 27: |
| /* We do performance test, so ignore data compare */ |
| if (dev->out_pipe == 0 || param->sglen == 0 || pattern != 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 27: bulk write %dMbytes\n", (param->iterations * |
| param->sglen * param->length) / (1024 * 1024)); |
| retval = test_queue(dev, param, |
| dev->out_pipe, NULL, 0); |
| break; |
| case 28: |
| if (dev->in_pipe == 0 || param->sglen == 0 || pattern != 0) |
| break; |
| dev_info(&intf->dev, |
| "TEST 28: bulk read %dMbytes\n", (param->iterations * |
| param->sglen * param->length) / (1024 * 1024)); |
| retval = test_queue(dev, param, |
| dev->in_pipe, NULL, 0); |
| break; |
| } |
| return retval; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* We only have this one interface to user space, through usbfs. |
| * User mode code can scan usbfs to find N different devices (maybe on |
| * different busses) to use when testing, and allocate one thread per |
| * test. So discovery is simplified, and we have no device naming issues. |
| * |
| * Don't use these only as stress/load tests. Use them along with with |
| * other USB bus activity: plugging, unplugging, mousing, mp3 playback, |
| * video capture, and so on. Run different tests at different times, in |
| * different sequences. Nothing here should interact with other devices, |
| * except indirectly by consuming USB bandwidth and CPU resources for test |
| * threads and request completion. But the only way to know that for sure |
| * is to test when HC queues are in use by many devices. |
| * |
| * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(), |
| * it locks out usbcore in certain code paths. Notably, if you disconnect |
| * the device-under-test, hub_wq will wait block forever waiting for the |
| * ioctl to complete ... so that usb_disconnect() can abort the pending |
| * urbs and then call usbtest_disconnect(). To abort a test, you're best |
| * off just killing the userspace task and waiting for it to exit. |
| */ |
| |
| static int |
| usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) |
| { |
| |
| struct usbtest_dev *dev = usb_get_intfdata(intf); |
| struct usbtest_param_64 *param_64 = buf; |
| struct usbtest_param_32 temp; |
| struct usbtest_param_32 *param_32 = buf; |
| struct timespec64 start; |
| struct timespec64 end; |
| struct timespec64 duration; |
| int retval = -EOPNOTSUPP; |
| |
| /* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */ |
| |
| pattern = mod_pattern; |
| |
| if (mutex_lock_interruptible(&dev->lock)) |
| return -ERESTARTSYS; |
| |
| /* FIXME: What if a system sleep starts while a test is running? */ |
| |
| /* some devices, like ez-usb default devices, need a non-default |
| * altsetting to have any active endpoints. some tests change |
| * altsettings; force a default so most tests don't need to check. |
| */ |
| if (dev->info->alt >= 0) { |
| if (intf->altsetting->desc.bInterfaceNumber) { |
| retval = -ENODEV; |
| goto free_mutex; |
| } |
| retval = set_altsetting(dev, dev->info->alt); |
| if (retval) { |
| dev_err(&intf->dev, |
| "set altsetting to %d failed, %d\n", |
| dev->info->alt, retval); |
| goto free_mutex; |
| } |
| } |
| |
| switch (code) { |
| case USBTEST_REQUEST_64: |
| temp.test_num = param_64->test_num; |
| temp.iterations = param_64->iterations; |
| temp.length = param_64->length; |
| temp.sglen = param_64->sglen; |
| temp.vary = param_64->vary; |
| param_32 = &temp; |
| break; |
| |
| case USBTEST_REQUEST_32: |
| break; |
| |
| default: |
| retval = -EOPNOTSUPP; |
| goto free_mutex; |
| } |
| |
| ktime_get_ts64(&start); |
| |
| retval = usbtest_do_ioctl(intf, param_32); |
| if (retval < 0) |
| goto free_mutex; |
| |
| ktime_get_ts64(&end); |
| |
| duration = timespec64_sub(end, start); |
| |
| temp.duration_sec = duration.tv_sec; |
| temp.duration_usec = duration.tv_nsec/NSEC_PER_USEC; |
| |
| switch (code) { |
| case USBTEST_REQUEST_32: |
| param_32->duration_sec = temp.duration_sec; |
| param_32->duration_usec = temp.duration_usec; |
| break; |
| |
| case USBTEST_REQUEST_64: |
| param_64->duration_sec = temp.duration_sec; |
| param_64->duration_usec = temp.duration_usec; |
| break; |
| } |
| |
| free_mutex: |
| mutex_unlock(&dev->lock); |
| return retval; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static unsigned force_interrupt; |
| module_param(force_interrupt, uint, 0); |
| MODULE_PARM_DESC(force_interrupt, "0 = test default; else interrupt"); |
| |
| #ifdef GENERIC |
| static unsigned short vendor; |
| module_param(vendor, ushort, 0); |
| MODULE_PARM_DESC(vendor, "vendor code (from usb-if)"); |
| |
| static unsigned short product; |
| module_param(product, ushort, 0); |
| MODULE_PARM_DESC(product, "product code (from vendor)"); |
| #endif |
| |
| static int |
| usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id) |
| { |
| struct usb_device *udev; |
| struct usbtest_dev *dev; |
| struct usbtest_info *info; |
| char *rtest, *wtest; |
| char *irtest, *iwtest; |
| char *intrtest, *intwtest; |
| |
| udev = interface_to_usbdev(intf); |
| |
| #ifdef GENERIC |
| /* specify devices by module parameters? */ |
| if (id->match_flags == 0) { |
| /* vendor match required, product match optional */ |
| if (!vendor || le16_to_cpu(udev->descriptor.idVendor) != (u16)vendor) |
| return -ENODEV; |
| if (product && le16_to_cpu(udev->descriptor.idProduct) != (u16)product) |
| return -ENODEV; |
| dev_info(&intf->dev, "matched module params, " |
| "vend=0x%04x prod=0x%04x\n", |
| le16_to_cpu(udev->descriptor.idVendor), |
| le16_to_cpu(udev->descriptor.idProduct)); |
| } |
| #endif |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| info = (struct usbtest_info *) id->driver_info; |
| dev->info = info; |
| mutex_init(&dev->lock); |
| |
| dev->intf = intf; |
| |
| /* cacheline-aligned scratch for i/o */ |
| dev->buf = kmalloc(TBUF_SIZE, GFP_KERNEL); |
| if (dev->buf == NULL) { |
| kfree(dev); |
| return -ENOMEM; |
| } |
| |
| /* NOTE this doesn't yet test the handful of difference that are |
| * visible with high speed interrupts: bigger maxpacket (1K) and |
| * "high bandwidth" modes (up to 3 packets/uframe). |
| */ |
| rtest = wtest = ""; |
| irtest = iwtest = ""; |
| intrtest = intwtest = ""; |
| if (force_interrupt || udev->speed == USB_SPEED_LOW) { |
| if (info->ep_in) { |
| dev->in_pipe = usb_rcvintpipe(udev, info->ep_in); |
| rtest = " intr-in"; |
| } |
| if (info->ep_out) { |
| dev->out_pipe = usb_sndintpipe(udev, info->ep_out); |
| wtest = " intr-out"; |
| } |
| } else { |
| if (override_alt >= 0 || info->autoconf) { |
| int status; |
| |
| status = get_endpoints(dev, intf); |
| if (status < 0) { |
| WARNING(dev, "couldn't get endpoints, %d\n", |
| status); |
| kfree(dev->buf); |
| kfree(dev); |
| return status; |
| } |
| /* may find bulk or ISO pipes */ |
| } else { |
| if (info->ep_in) |
| dev->in_pipe = usb_rcvbulkpipe(udev, |
| info->ep_in); |
| if (info->ep_out) |
| dev->out_pipe = usb_sndbulkpipe(udev, |
| info->ep_out); |
| } |
| if (dev->in_pipe) |
| rtest = " bulk-in"; |
| if (dev->out_pipe) |
| wtest = " bulk-out"; |
| if (dev->in_iso_pipe) |
| irtest = " iso-in"; |
| if (dev->out_iso_pipe) |
| iwtest = " iso-out"; |
| if (dev->in_int_pipe) |
| intrtest = " int-in"; |
| if (dev->out_int_pipe) |
| intwtest = " int-out"; |
| } |
| |
| usb_set_intfdata(intf, dev); |
| dev_info(&intf->dev, "%s\n", info->name); |
| dev_info(&intf->dev, "%s {control%s%s%s%s%s%s%s} tests%s\n", |
| usb_speed_string(udev->speed), |
| info->ctrl_out ? " in/out" : "", |
| rtest, wtest, |
| irtest, iwtest, |
| intrtest, intwtest, |
| info->alt >= 0 ? " (+alt)" : ""); |
| return 0; |
| } |
| |
| static int usbtest_suspend(struct usb_interface *intf, pm_message_t message) |
| { |
| return 0; |
| } |
| |
| static int usbtest_resume(struct usb_interface *intf) |
| { |
| return 0; |
| } |
| |
| |
| static void usbtest_disconnect(struct usb_interface *intf) |
| { |
| struct usbtest_dev *dev = usb_get_intfdata(intf); |
| |
| usb_set_intfdata(intf, NULL); |
| dev_dbg(&intf->dev, "disconnect\n"); |
| kfree(dev); |
| } |
| |
| /* Basic testing only needs a device that can source or sink bulk traffic. |
| * Any device can test control transfers (default with GENERIC binding). |
| * |
| * Several entries work with the default EP0 implementation that's built |
| * into EZ-USB chips. There's a default vendor ID which can be overridden |
| * by (very) small config EEPROMS, but otherwise all these devices act |
| * identically until firmware is loaded: only EP0 works. It turns out |
| * to be easy to make other endpoints work, without modifying that EP0 |
| * behavior. For now, we expect that kind of firmware. |
| */ |
| |
| /* an21xx or fx versions of ez-usb */ |
| static struct usbtest_info ez1_info = { |
| .name = "EZ-USB device", |
| .ep_in = 2, |
| .ep_out = 2, |
| .alt = 1, |
| }; |
| |
| /* fx2 version of ez-usb */ |
| static struct usbtest_info ez2_info = { |
| .name = "FX2 device", |
| .ep_in = 6, |
| .ep_out = 2, |
| .alt = 1, |
| }; |
| |
| /* ezusb family device with dedicated usb test firmware, |
| */ |
| static struct usbtest_info fw_info = { |
| .name = "usb test device", |
| .ep_in = 2, |
| .ep_out = 2, |
| .alt = 1, |
| .autoconf = 1, /* iso and ctrl_out need autoconf */ |
| .ctrl_out = 1, |
| .iso = 1, /* iso_ep's are #8 in/out */ |
| }; |
| |
| /* peripheral running Linux and 'zero.c' test firmware, or |
| * its user-mode cousin. different versions of this use |
| * different hardware with the same vendor/product codes. |
| * host side MUST rely on the endpoint descriptors. |
| */ |
| static struct usbtest_info gz_info = { |
| .name = "Linux gadget zero", |
| .autoconf = 1, |
| .ctrl_out = 1, |
| .iso = 1, |
| .intr = 1, |
| .alt = 0, |
| }; |
| |
| static struct usbtest_info um_info = { |
| .name = "Linux user mode test driver", |
| .autoconf = 1, |
| .alt = -1, |
| }; |
| |
| static struct usbtest_info um2_info = { |
| .name = "Linux user mode ISO test driver", |
| .autoconf = 1, |
| .iso = 1, |
| .alt = -1, |
| }; |
| |
| #ifdef IBOT2 |
| /* this is a nice source of high speed bulk data; |
| * uses an FX2, with firmware provided in the device |
| */ |
| static struct usbtest_info ibot2_info = { |
| .name = "iBOT2 webcam", |
| .ep_in = 2, |
| .alt = -1, |
| }; |
| #endif |
| |
| #ifdef GENERIC |
| /* we can use any device to test control traffic */ |
| static struct usbtest_info generic_info = { |
| .name = "Generic USB device", |
| .alt = -1, |
| }; |
| #endif |
| |
| |
| static const struct usb_device_id id_table[] = { |
| |
| /*-------------------------------------------------------------*/ |
| |
| /* EZ-USB devices which download firmware to replace (or in our |
| * case augment) the default device implementation. |
| */ |
| |
| /* generic EZ-USB FX controller */ |
| { USB_DEVICE(0x0547, 0x2235), |
| .driver_info = (unsigned long) &ez1_info, |
| }, |
| |
| /* CY3671 development board with EZ-USB FX */ |
| { USB_DEVICE(0x0547, 0x0080), |
| .driver_info = (unsigned long) &ez1_info, |
| }, |
| |
| /* generic EZ-USB FX2 controller (or development board) */ |
| { USB_DEVICE(0x04b4, 0x8613), |
| .driver_info = (unsigned long) &ez2_info, |
| }, |
| |
| /* re-enumerated usb test device firmware */ |
| { USB_DEVICE(0xfff0, 0xfff0), |
| .driver_info = (unsigned long) &fw_info, |
| }, |
| |
| /* "Gadget Zero" firmware runs under Linux */ |
| { USB_DEVICE(0x0525, 0xa4a0), |
| .driver_info = (unsigned long) &gz_info, |
| }, |
| |
| /* so does a user-mode variant */ |
| { USB_DEVICE(0x0525, 0xa4a4), |
| .driver_info = (unsigned long) &um_info, |
| }, |
| |
| /* ... and a user-mode variant that talks iso */ |
| { USB_DEVICE(0x0525, 0xa4a3), |
| .driver_info = (unsigned long) &um2_info, |
| }, |
| |
| #ifdef KEYSPAN_19Qi |
| /* Keyspan 19qi uses an21xx (original EZ-USB) */ |
| /* this does not coexist with the real Keyspan 19qi driver! */ |
| { USB_DEVICE(0x06cd, 0x010b), |
| .driver_info = (unsigned long) &ez1_info, |
| }, |
| #endif |
| |
| /*-------------------------------------------------------------*/ |
| |
| #ifdef IBOT2 |
| /* iBOT2 makes a nice source of high speed bulk-in data */ |
| /* this does not coexist with a real iBOT2 driver! */ |
| { USB_DEVICE(0x0b62, 0x0059), |
| .driver_info = (unsigned long) &ibot2_info, |
| }, |
| #endif |
| |
| /*-------------------------------------------------------------*/ |
| |
| #ifdef GENERIC |
| /* module params can specify devices to use for control tests */ |
| { .driver_info = (unsigned long) &generic_info, }, |
| #endif |
| |
| /*-------------------------------------------------------------*/ |
| |
| { } |
| }; |
| MODULE_DEVICE_TABLE(usb, id_table); |
| |
| static struct usb_driver usbtest_driver = { |
| .name = "usbtest", |
| .id_table = id_table, |
| .probe = usbtest_probe, |
| .unlocked_ioctl = usbtest_ioctl, |
| .disconnect = usbtest_disconnect, |
| .suspend = usbtest_suspend, |
| .resume = usbtest_resume, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int __init usbtest_init(void) |
| { |
| #ifdef GENERIC |
| if (vendor) |
| pr_debug("params: vend=0x%04x prod=0x%04x\n", vendor, product); |
| #endif |
| return usb_register(&usbtest_driver); |
| } |
| module_init(usbtest_init); |
| |
| static void __exit usbtest_exit(void) |
| { |
| usb_deregister(&usbtest_driver); |
| } |
| module_exit(usbtest_exit); |
| |
| MODULE_DESCRIPTION("USB Core/HCD Testing Driver"); |
| MODULE_LICENSE("GPL"); |
| |