| /* |
| * Copyright (c) 2006 Dave Airlie <airlied@linux.ie> |
| * Copyright (c) 2007-2008 Intel Corporation |
| * Jesse Barnes <jesse.barnes@intel.com> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| */ |
| #ifndef __INTEL_DRV_H__ |
| #define __INTEL_DRV_H__ |
| |
| #include <linux/async.h> |
| #include <linux/i2c.h> |
| #include <linux/sched/clock.h> |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_dp_dual_mode_helper.h> |
| #include <drm/drm_dp_mst_helper.h> |
| #include <drm/drm_encoder.h> |
| #include <drm/drm_fb_helper.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_rect.h> |
| #include <drm/drm_vblank.h> |
| #include <drm/i915_drm.h> |
| #include <drm/i915_mei_hdcp_interface.h> |
| #include <media/cec-notifier.h> |
| |
| #include "i915_drv.h" |
| |
| struct drm_printer; |
| |
| /* |
| * Display related stuff |
| */ |
| |
| /* these are outputs from the chip - integrated only |
| external chips are via DVO or SDVO output */ |
| enum intel_output_type { |
| INTEL_OUTPUT_UNUSED = 0, |
| INTEL_OUTPUT_ANALOG = 1, |
| INTEL_OUTPUT_DVO = 2, |
| INTEL_OUTPUT_SDVO = 3, |
| INTEL_OUTPUT_LVDS = 4, |
| INTEL_OUTPUT_TVOUT = 5, |
| INTEL_OUTPUT_HDMI = 6, |
| INTEL_OUTPUT_DP = 7, |
| INTEL_OUTPUT_EDP = 8, |
| INTEL_OUTPUT_DSI = 9, |
| INTEL_OUTPUT_DDI = 10, |
| INTEL_OUTPUT_DP_MST = 11, |
| }; |
| |
| struct intel_framebuffer { |
| struct drm_framebuffer base; |
| struct intel_rotation_info rot_info; |
| |
| /* for each plane in the normal GTT view */ |
| struct { |
| unsigned int x, y; |
| } normal[2]; |
| /* for each plane in the rotated GTT view */ |
| struct { |
| unsigned int x, y; |
| unsigned int pitch; /* pixels */ |
| } rotated[2]; |
| }; |
| |
| struct intel_fbdev { |
| struct drm_fb_helper helper; |
| struct intel_framebuffer *fb; |
| struct i915_vma *vma; |
| unsigned long vma_flags; |
| async_cookie_t cookie; |
| int preferred_bpp; |
| |
| /* Whether or not fbdev hpd processing is temporarily suspended */ |
| bool hpd_suspended : 1; |
| /* Set when a hotplug was received while HPD processing was |
| * suspended |
| */ |
| bool hpd_waiting : 1; |
| |
| /* Protects hpd_suspended */ |
| struct mutex hpd_lock; |
| }; |
| |
| struct intel_encoder { |
| struct drm_encoder base; |
| |
| enum intel_output_type type; |
| enum port port; |
| unsigned int cloneable; |
| bool (*hotplug)(struct intel_encoder *encoder, |
| struct intel_connector *connector); |
| enum intel_output_type (*compute_output_type)(struct intel_encoder *, |
| struct intel_crtc_state *, |
| struct drm_connector_state *); |
| int (*compute_config)(struct intel_encoder *, |
| struct intel_crtc_state *, |
| struct drm_connector_state *); |
| void (*pre_pll_enable)(struct intel_encoder *, |
| const struct intel_crtc_state *, |
| const struct drm_connector_state *); |
| void (*pre_enable)(struct intel_encoder *, |
| const struct intel_crtc_state *, |
| const struct drm_connector_state *); |
| void (*enable)(struct intel_encoder *, |
| const struct intel_crtc_state *, |
| const struct drm_connector_state *); |
| void (*disable)(struct intel_encoder *, |
| const struct intel_crtc_state *, |
| const struct drm_connector_state *); |
| void (*post_disable)(struct intel_encoder *, |
| const struct intel_crtc_state *, |
| const struct drm_connector_state *); |
| void (*post_pll_disable)(struct intel_encoder *, |
| const struct intel_crtc_state *, |
| const struct drm_connector_state *); |
| void (*update_pipe)(struct intel_encoder *, |
| const struct intel_crtc_state *, |
| const struct drm_connector_state *); |
| /* Read out the current hw state of this connector, returning true if |
| * the encoder is active. If the encoder is enabled it also set the pipe |
| * it is connected to in the pipe parameter. */ |
| bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe); |
| /* Reconstructs the equivalent mode flags for the current hardware |
| * state. This must be called _after_ display->get_pipe_config has |
| * pre-filled the pipe config. Note that intel_encoder->base.crtc must |
| * be set correctly before calling this function. */ |
| void (*get_config)(struct intel_encoder *, |
| struct intel_crtc_state *pipe_config); |
| /* |
| * Acquires the power domains needed for an active encoder during |
| * hardware state readout. |
| */ |
| void (*get_power_domains)(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state); |
| /* |
| * Called during system suspend after all pending requests for the |
| * encoder are flushed (for example for DP AUX transactions) and |
| * device interrupts are disabled. |
| */ |
| void (*suspend)(struct intel_encoder *); |
| int crtc_mask; |
| enum hpd_pin hpd_pin; |
| enum intel_display_power_domain power_domain; |
| /* for communication with audio component; protected by av_mutex */ |
| const struct drm_connector *audio_connector; |
| }; |
| |
| struct intel_panel { |
| struct drm_display_mode *fixed_mode; |
| struct drm_display_mode *downclock_mode; |
| |
| /* backlight */ |
| struct { |
| bool present; |
| u32 level; |
| u32 min; |
| u32 max; |
| bool enabled; |
| bool combination_mode; /* gen 2/4 only */ |
| bool active_low_pwm; |
| bool alternate_pwm_increment; /* lpt+ */ |
| |
| /* PWM chip */ |
| bool util_pin_active_low; /* bxt+ */ |
| u8 controller; /* bxt+ only */ |
| struct pwm_device *pwm; |
| |
| struct backlight_device *device; |
| |
| /* Connector and platform specific backlight functions */ |
| int (*setup)(struct intel_connector *connector, enum pipe pipe); |
| u32 (*get)(struct intel_connector *connector); |
| void (*set)(const struct drm_connector_state *conn_state, u32 level); |
| void (*disable)(const struct drm_connector_state *conn_state); |
| void (*enable)(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state); |
| u32 (*hz_to_pwm)(struct intel_connector *connector, u32 hz); |
| void (*power)(struct intel_connector *, bool enable); |
| } backlight; |
| }; |
| |
| struct intel_digital_port; |
| |
| enum check_link_response { |
| HDCP_LINK_PROTECTED = 0, |
| HDCP_TOPOLOGY_CHANGE, |
| HDCP_LINK_INTEGRITY_FAILURE, |
| HDCP_REAUTH_REQUEST |
| }; |
| |
| /* |
| * This structure serves as a translation layer between the generic HDCP code |
| * and the bus-specific code. What that means is that HDCP over HDMI differs |
| * from HDCP over DP, so to account for these differences, we need to |
| * communicate with the receiver through this shim. |
| * |
| * For completeness, the 2 buses differ in the following ways: |
| * - DP AUX vs. DDC |
| * HDCP registers on the receiver are set via DP AUX for DP, and |
| * they are set via DDC for HDMI. |
| * - Receiver register offsets |
| * The offsets of the registers are different for DP vs. HDMI |
| * - Receiver register masks/offsets |
| * For instance, the ready bit for the KSV fifo is in a different |
| * place on DP vs HDMI |
| * - Receiver register names |
| * Seriously. In the DP spec, the 16-bit register containing |
| * downstream information is called BINFO, on HDMI it's called |
| * BSTATUS. To confuse matters further, DP has a BSTATUS register |
| * with a completely different definition. |
| * - KSV FIFO |
| * On HDMI, the ksv fifo is read all at once, whereas on DP it must |
| * be read 3 keys at a time |
| * - Aksv output |
| * Since Aksv is hidden in hardware, there's different procedures |
| * to send it over DP AUX vs DDC |
| */ |
| struct intel_hdcp_shim { |
| /* Outputs the transmitter's An and Aksv values to the receiver. */ |
| int (*write_an_aksv)(struct intel_digital_port *intel_dig_port, u8 *an); |
| |
| /* Reads the receiver's key selection vector */ |
| int (*read_bksv)(struct intel_digital_port *intel_dig_port, u8 *bksv); |
| |
| /* |
| * Reads BINFO from DP receivers and BSTATUS from HDMI receivers. The |
| * definitions are the same in the respective specs, but the names are |
| * different. Call it BSTATUS since that's the name the HDMI spec |
| * uses and it was there first. |
| */ |
| int (*read_bstatus)(struct intel_digital_port *intel_dig_port, |
| u8 *bstatus); |
| |
| /* Determines whether a repeater is present downstream */ |
| int (*repeater_present)(struct intel_digital_port *intel_dig_port, |
| bool *repeater_present); |
| |
| /* Reads the receiver's Ri' value */ |
| int (*read_ri_prime)(struct intel_digital_port *intel_dig_port, u8 *ri); |
| |
| /* Determines if the receiver's KSV FIFO is ready for consumption */ |
| int (*read_ksv_ready)(struct intel_digital_port *intel_dig_port, |
| bool *ksv_ready); |
| |
| /* Reads the ksv fifo for num_downstream devices */ |
| int (*read_ksv_fifo)(struct intel_digital_port *intel_dig_port, |
| int num_downstream, u8 *ksv_fifo); |
| |
| /* Reads a 32-bit part of V' from the receiver */ |
| int (*read_v_prime_part)(struct intel_digital_port *intel_dig_port, |
| int i, u32 *part); |
| |
| /* Enables HDCP signalling on the port */ |
| int (*toggle_signalling)(struct intel_digital_port *intel_dig_port, |
| bool enable); |
| |
| /* Ensures the link is still protected */ |
| bool (*check_link)(struct intel_digital_port *intel_dig_port); |
| |
| /* Detects panel's hdcp capability. This is optional for HDMI. */ |
| int (*hdcp_capable)(struct intel_digital_port *intel_dig_port, |
| bool *hdcp_capable); |
| |
| /* HDCP adaptation(DP/HDMI) required on the port */ |
| enum hdcp_wired_protocol protocol; |
| |
| /* Detects whether sink is HDCP2.2 capable */ |
| int (*hdcp_2_2_capable)(struct intel_digital_port *intel_dig_port, |
| bool *capable); |
| |
| /* Write HDCP2.2 messages */ |
| int (*write_2_2_msg)(struct intel_digital_port *intel_dig_port, |
| void *buf, size_t size); |
| |
| /* Read HDCP2.2 messages */ |
| int (*read_2_2_msg)(struct intel_digital_port *intel_dig_port, |
| u8 msg_id, void *buf, size_t size); |
| |
| /* |
| * Implementation of DP HDCP2.2 Errata for the communication of stream |
| * type to Receivers. In DP HDCP2.2 Stream type is one of the input to |
| * the HDCP2.2 Cipher for En/De-Cryption. Not applicable for HDMI. |
| */ |
| int (*config_stream_type)(struct intel_digital_port *intel_dig_port, |
| bool is_repeater, u8 type); |
| |
| /* HDCP2.2 Link Integrity Check */ |
| int (*check_2_2_link)(struct intel_digital_port *intel_dig_port); |
| }; |
| |
| struct intel_hdcp { |
| const struct intel_hdcp_shim *shim; |
| /* Mutex for hdcp state of the connector */ |
| struct mutex mutex; |
| u64 value; |
| struct delayed_work check_work; |
| struct work_struct prop_work; |
| |
| /* HDCP1.4 Encryption status */ |
| bool hdcp_encrypted; |
| |
| /* HDCP2.2 related definitions */ |
| /* Flag indicates whether this connector supports HDCP2.2 or not. */ |
| bool hdcp2_supported; |
| |
| /* HDCP2.2 Encryption status */ |
| bool hdcp2_encrypted; |
| |
| /* |
| * Content Stream Type defined by content owner. TYPE0(0x0) content can |
| * flow in the link protected by HDCP2.2 or HDCP1.4, where as TYPE1(0x1) |
| * content can flow only through a link protected by HDCP2.2. |
| */ |
| u8 content_type; |
| struct hdcp_port_data port_data; |
| |
| bool is_paired; |
| bool is_repeater; |
| |
| /* |
| * Count of ReceiverID_List received. Initialized to 0 at AKE_INIT. |
| * Incremented after processing the RepeaterAuth_Send_ReceiverID_List. |
| * When it rolls over re-auth has to be triggered. |
| */ |
| u32 seq_num_v; |
| |
| /* |
| * Count of RepeaterAuth_Stream_Manage msg propagated. |
| * Initialized to 0 on AKE_INIT. Incremented after every successful |
| * transmission of RepeaterAuth_Stream_Manage message. When it rolls |
| * over re-Auth has to be triggered. |
| */ |
| u32 seq_num_m; |
| |
| /* |
| * Work queue to signal the CP_IRQ. Used for the waiters to read the |
| * available information from HDCP DP sink. |
| */ |
| wait_queue_head_t cp_irq_queue; |
| atomic_t cp_irq_count; |
| int cp_irq_count_cached; |
| }; |
| |
| struct intel_connector { |
| struct drm_connector base; |
| /* |
| * The fixed encoder this connector is connected to. |
| */ |
| struct intel_encoder *encoder; |
| |
| /* ACPI device id for ACPI and driver cooperation */ |
| u32 acpi_device_id; |
| |
| /* Reads out the current hw, returning true if the connector is enabled |
| * and active (i.e. dpms ON state). */ |
| bool (*get_hw_state)(struct intel_connector *); |
| |
| /* Panel info for eDP and LVDS */ |
| struct intel_panel panel; |
| |
| /* Cached EDID for eDP and LVDS. May hold ERR_PTR for invalid EDID. */ |
| struct edid *edid; |
| struct edid *detect_edid; |
| |
| /* since POLL and HPD connectors may use the same HPD line keep the native |
| state of connector->polled in case hotplug storm detection changes it */ |
| u8 polled; |
| |
| void *port; /* store this opaque as its illegal to dereference it */ |
| |
| struct intel_dp *mst_port; |
| |
| /* Work struct to schedule a uevent on link train failure */ |
| struct work_struct modeset_retry_work; |
| |
| struct intel_hdcp hdcp; |
| }; |
| |
| struct intel_digital_connector_state { |
| struct drm_connector_state base; |
| |
| enum hdmi_force_audio force_audio; |
| int broadcast_rgb; |
| }; |
| |
| #define to_intel_digital_connector_state(x) container_of(x, struct intel_digital_connector_state, base) |
| |
| struct dpll { |
| /* given values */ |
| int n; |
| int m1, m2; |
| int p1, p2; |
| /* derived values */ |
| int dot; |
| int vco; |
| int m; |
| int p; |
| }; |
| |
| struct intel_atomic_state { |
| struct drm_atomic_state base; |
| |
| intel_wakeref_t wakeref; |
| |
| struct { |
| /* |
| * Logical state of cdclk (used for all scaling, watermark, |
| * etc. calculations and checks). This is computed as if all |
| * enabled crtcs were active. |
| */ |
| struct intel_cdclk_state logical; |
| |
| /* |
| * Actual state of cdclk, can be different from the logical |
| * state only when all crtc's are DPMS off. |
| */ |
| struct intel_cdclk_state actual; |
| |
| int force_min_cdclk; |
| bool force_min_cdclk_changed; |
| /* pipe to which cd2x update is synchronized */ |
| enum pipe pipe; |
| } cdclk; |
| |
| bool dpll_set, modeset; |
| |
| /* |
| * Does this transaction change the pipes that are active? This mask |
| * tracks which CRTC's have changed their active state at the end of |
| * the transaction (not counting the temporary disable during modesets). |
| * This mask should only be non-zero when intel_state->modeset is true, |
| * but the converse is not necessarily true; simply changing a mode may |
| * not flip the final active status of any CRTC's |
| */ |
| unsigned int active_pipe_changes; |
| |
| unsigned int active_crtcs; |
| /* minimum acceptable cdclk for each pipe */ |
| int min_cdclk[I915_MAX_PIPES]; |
| /* minimum acceptable voltage level for each pipe */ |
| u8 min_voltage_level[I915_MAX_PIPES]; |
| |
| struct intel_shared_dpll_state shared_dpll[I915_NUM_PLLS]; |
| |
| /* |
| * Current watermarks can't be trusted during hardware readout, so |
| * don't bother calculating intermediate watermarks. |
| */ |
| bool skip_intermediate_wm; |
| |
| bool rps_interactive; |
| |
| /* Gen9+ only */ |
| struct skl_ddb_values wm_results; |
| |
| struct i915_sw_fence commit_ready; |
| |
| struct llist_node freed; |
| }; |
| |
| struct intel_plane_state { |
| struct drm_plane_state base; |
| struct i915_ggtt_view view; |
| struct i915_vma *vma; |
| unsigned long flags; |
| #define PLANE_HAS_FENCE BIT(0) |
| |
| struct { |
| u32 offset; |
| /* |
| * Plane stride in: |
| * bytes for 0/180 degree rotation |
| * pixels for 90/270 degree rotation |
| */ |
| u32 stride; |
| int x, y; |
| } color_plane[2]; |
| |
| /* plane control register */ |
| u32 ctl; |
| |
| /* plane color control register */ |
| u32 color_ctl; |
| |
| /* |
| * scaler_id |
| * = -1 : not using a scaler |
| * >= 0 : using a scalers |
| * |
| * plane requiring a scaler: |
| * - During check_plane, its bit is set in |
| * crtc_state->scaler_state.scaler_users by calling helper function |
| * update_scaler_plane. |
| * - scaler_id indicates the scaler it got assigned. |
| * |
| * plane doesn't require a scaler: |
| * - this can happen when scaling is no more required or plane simply |
| * got disabled. |
| * - During check_plane, corresponding bit is reset in |
| * crtc_state->scaler_state.scaler_users by calling helper function |
| * update_scaler_plane. |
| */ |
| int scaler_id; |
| |
| /* |
| * linked_plane: |
| * |
| * ICL planar formats require 2 planes that are updated as pairs. |
| * This member is used to make sure the other plane is also updated |
| * when required, and for update_slave() to find the correct |
| * plane_state to pass as argument. |
| */ |
| struct intel_plane *linked_plane; |
| |
| /* |
| * slave: |
| * If set don't update use the linked plane's state for updating |
| * this plane during atomic commit with the update_slave() callback. |
| * |
| * It's also used by the watermark code to ignore wm calculations on |
| * this plane. They're calculated by the linked plane's wm code. |
| */ |
| u32 slave; |
| |
| struct drm_intel_sprite_colorkey ckey; |
| }; |
| |
| struct intel_initial_plane_config { |
| struct intel_framebuffer *fb; |
| unsigned int tiling; |
| int size; |
| u32 base; |
| u8 rotation; |
| }; |
| |
| struct intel_scaler { |
| int in_use; |
| u32 mode; |
| }; |
| |
| struct intel_crtc_scaler_state { |
| #define SKL_NUM_SCALERS 2 |
| struct intel_scaler scalers[SKL_NUM_SCALERS]; |
| |
| /* |
| * scaler_users: keeps track of users requesting scalers on this crtc. |
| * |
| * If a bit is set, a user is using a scaler. |
| * Here user can be a plane or crtc as defined below: |
| * bits 0-30 - plane (bit position is index from drm_plane_index) |
| * bit 31 - crtc |
| * |
| * Instead of creating a new index to cover planes and crtc, using |
| * existing drm_plane_index for planes which is well less than 31 |
| * planes and bit 31 for crtc. This should be fine to cover all |
| * our platforms. |
| * |
| * intel_atomic_setup_scalers will setup available scalers to users |
| * requesting scalers. It will gracefully fail if request exceeds |
| * avilability. |
| */ |
| #define SKL_CRTC_INDEX 31 |
| unsigned scaler_users; |
| |
| /* scaler used by crtc for panel fitting purpose */ |
| int scaler_id; |
| }; |
| |
| /* drm_mode->private_flags */ |
| #define I915_MODE_FLAG_INHERITED (1<<0) |
| /* Flag to get scanline using frame time stamps */ |
| #define I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP (1<<1) |
| /* Flag to use the scanline counter instead of the pixel counter */ |
| #define I915_MODE_FLAG_USE_SCANLINE_COUNTER (1<<2) |
| |
| struct intel_pipe_wm { |
| struct intel_wm_level wm[5]; |
| u32 linetime; |
| bool fbc_wm_enabled; |
| bool pipe_enabled; |
| bool sprites_enabled; |
| bool sprites_scaled; |
| }; |
| |
| struct skl_plane_wm { |
| struct skl_wm_level wm[8]; |
| struct skl_wm_level uv_wm[8]; |
| struct skl_wm_level trans_wm; |
| bool is_planar; |
| }; |
| |
| struct skl_pipe_wm { |
| struct skl_plane_wm planes[I915_MAX_PLANES]; |
| u32 linetime; |
| }; |
| |
| enum vlv_wm_level { |
| VLV_WM_LEVEL_PM2, |
| VLV_WM_LEVEL_PM5, |
| VLV_WM_LEVEL_DDR_DVFS, |
| NUM_VLV_WM_LEVELS, |
| }; |
| |
| struct vlv_wm_state { |
| struct g4x_pipe_wm wm[NUM_VLV_WM_LEVELS]; |
| struct g4x_sr_wm sr[NUM_VLV_WM_LEVELS]; |
| u8 num_levels; |
| bool cxsr; |
| }; |
| |
| struct vlv_fifo_state { |
| u16 plane[I915_MAX_PLANES]; |
| }; |
| |
| enum g4x_wm_level { |
| G4X_WM_LEVEL_NORMAL, |
| G4X_WM_LEVEL_SR, |
| G4X_WM_LEVEL_HPLL, |
| NUM_G4X_WM_LEVELS, |
| }; |
| |
| struct g4x_wm_state { |
| struct g4x_pipe_wm wm; |
| struct g4x_sr_wm sr; |
| struct g4x_sr_wm hpll; |
| bool cxsr; |
| bool hpll_en; |
| bool fbc_en; |
| }; |
| |
| struct intel_crtc_wm_state { |
| union { |
| struct { |
| /* |
| * Intermediate watermarks; these can be |
| * programmed immediately since they satisfy |
| * both the current configuration we're |
| * switching away from and the new |
| * configuration we're switching to. |
| */ |
| struct intel_pipe_wm intermediate; |
| |
| /* |
| * Optimal watermarks, programmed post-vblank |
| * when this state is committed. |
| */ |
| struct intel_pipe_wm optimal; |
| } ilk; |
| |
| struct { |
| /* gen9+ only needs 1-step wm programming */ |
| struct skl_pipe_wm optimal; |
| struct skl_ddb_entry ddb; |
| struct skl_ddb_entry plane_ddb_y[I915_MAX_PLANES]; |
| struct skl_ddb_entry plane_ddb_uv[I915_MAX_PLANES]; |
| } skl; |
| |
| struct { |
| /* "raw" watermarks (not inverted) */ |
| struct g4x_pipe_wm raw[NUM_VLV_WM_LEVELS]; |
| /* intermediate watermarks (inverted) */ |
| struct vlv_wm_state intermediate; |
| /* optimal watermarks (inverted) */ |
| struct vlv_wm_state optimal; |
| /* display FIFO split */ |
| struct vlv_fifo_state fifo_state; |
| } vlv; |
| |
| struct { |
| /* "raw" watermarks */ |
| struct g4x_pipe_wm raw[NUM_G4X_WM_LEVELS]; |
| /* intermediate watermarks */ |
| struct g4x_wm_state intermediate; |
| /* optimal watermarks */ |
| struct g4x_wm_state optimal; |
| } g4x; |
| }; |
| |
| /* |
| * Platforms with two-step watermark programming will need to |
| * update watermark programming post-vblank to switch from the |
| * safe intermediate watermarks to the optimal final |
| * watermarks. |
| */ |
| bool need_postvbl_update; |
| }; |
| |
| enum intel_output_format { |
| INTEL_OUTPUT_FORMAT_INVALID, |
| INTEL_OUTPUT_FORMAT_RGB, |
| INTEL_OUTPUT_FORMAT_YCBCR420, |
| INTEL_OUTPUT_FORMAT_YCBCR444, |
| }; |
| |
| struct intel_crtc_state { |
| struct drm_crtc_state base; |
| |
| /** |
| * quirks - bitfield with hw state readout quirks |
| * |
| * For various reasons the hw state readout code might not be able to |
| * completely faithfully read out the current state. These cases are |
| * tracked with quirk flags so that fastboot and state checker can act |
| * accordingly. |
| */ |
| #define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync mode.flags */ |
| unsigned long quirks; |
| |
| unsigned fb_bits; /* framebuffers to flip */ |
| bool update_pipe; /* can a fast modeset be performed? */ |
| bool disable_cxsr; |
| bool update_wm_pre, update_wm_post; /* watermarks are updated */ |
| bool fb_changed; /* fb on any of the planes is changed */ |
| bool fifo_changed; /* FIFO split is changed */ |
| |
| /* Pipe source size (ie. panel fitter input size) |
| * All planes will be positioned inside this space, |
| * and get clipped at the edges. */ |
| int pipe_src_w, pipe_src_h; |
| |
| /* |
| * Pipe pixel rate, adjusted for |
| * panel fitter/pipe scaler downscaling. |
| */ |
| unsigned int pixel_rate; |
| |
| /* Whether to set up the PCH/FDI. Note that we never allow sharing |
| * between pch encoders and cpu encoders. */ |
| bool has_pch_encoder; |
| |
| /* Are we sending infoframes on the attached port */ |
| bool has_infoframe; |
| |
| /* CPU Transcoder for the pipe. Currently this can only differ from the |
| * pipe on Haswell and later (where we have a special eDP transcoder) |
| * and Broxton (where we have special DSI transcoders). */ |
| enum transcoder cpu_transcoder; |
| |
| /* |
| * Use reduced/limited/broadcast rbg range, compressing from the full |
| * range fed into the crtcs. |
| */ |
| bool limited_color_range; |
| |
| /* Bitmask of encoder types (enum intel_output_type) |
| * driven by the pipe. |
| */ |
| unsigned int output_types; |
| |
| /* Whether we should send NULL infoframes. Required for audio. */ |
| bool has_hdmi_sink; |
| |
| /* Audio enabled on this pipe. Only valid if either has_hdmi_sink or |
| * has_dp_encoder is set. */ |
| bool has_audio; |
| |
| /* |
| * Enable dithering, used when the selected pipe bpp doesn't match the |
| * plane bpp. |
| */ |
| bool dither; |
| |
| /* |
| * Dither gets enabled for 18bpp which causes CRC mismatch errors for |
| * compliance video pattern tests. |
| * Disable dither only if it is a compliance test request for |
| * 18bpp. |
| */ |
| bool dither_force_disable; |
| |
| /* Controls for the clock computation, to override various stages. */ |
| bool clock_set; |
| |
| /* SDVO TV has a bunch of special case. To make multifunction encoders |
| * work correctly, we need to track this at runtime.*/ |
| bool sdvo_tv_clock; |
| |
| /* |
| * crtc bandwidth limit, don't increase pipe bpp or clock if not really |
| * required. This is set in the 2nd loop of calling encoder's |
| * ->compute_config if the first pick doesn't work out. |
| */ |
| bool bw_constrained; |
| |
| /* Settings for the intel dpll used on pretty much everything but |
| * haswell. */ |
| struct dpll dpll; |
| |
| /* Selected dpll when shared or NULL. */ |
| struct intel_shared_dpll *shared_dpll; |
| |
| /* Actual register state of the dpll, for shared dpll cross-checking. */ |
| struct intel_dpll_hw_state dpll_hw_state; |
| |
| /* DSI PLL registers */ |
| struct { |
| u32 ctrl, div; |
| } dsi_pll; |
| |
| int pipe_bpp; |
| struct intel_link_m_n dp_m_n; |
| |
| /* m2_n2 for eDP downclock */ |
| struct intel_link_m_n dp_m2_n2; |
| bool has_drrs; |
| |
| bool has_psr; |
| bool has_psr2; |
| |
| /* |
| * Frequence the dpll for the port should run at. Differs from the |
| * adjusted dotclock e.g. for DP or 12bpc hdmi mode. This is also |
| * already multiplied by pixel_multiplier. |
| */ |
| int port_clock; |
| |
| /* Used by SDVO (and if we ever fix it, HDMI). */ |
| unsigned pixel_multiplier; |
| |
| u8 lane_count; |
| |
| /* |
| * Used by platforms having DP/HDMI PHY with programmable lane |
| * latency optimization. |
| */ |
| u8 lane_lat_optim_mask; |
| |
| /* minimum acceptable voltage level */ |
| u8 min_voltage_level; |
| |
| /* Panel fitter controls for gen2-gen4 + VLV */ |
| struct { |
| u32 control; |
| u32 pgm_ratios; |
| u32 lvds_border_bits; |
| } gmch_pfit; |
| |
| /* Panel fitter placement and size for Ironlake+ */ |
| struct { |
| u32 pos; |
| u32 size; |
| bool enabled; |
| bool force_thru; |
| } pch_pfit; |
| |
| /* FDI configuration, only valid if has_pch_encoder is set. */ |
| int fdi_lanes; |
| struct intel_link_m_n fdi_m_n; |
| |
| bool ips_enabled; |
| |
| bool crc_enabled; |
| |
| bool enable_fbc; |
| |
| bool double_wide; |
| |
| int pbn; |
| |
| struct intel_crtc_scaler_state scaler_state; |
| |
| /* w/a for waiting 2 vblanks during crtc enable */ |
| enum pipe hsw_workaround_pipe; |
| |
| /* IVB sprite scaling w/a (WaCxSRDisabledForSpriteScaling:ivb) */ |
| bool disable_lp_wm; |
| |
| struct intel_crtc_wm_state wm; |
| |
| u32 data_rate[I915_MAX_PLANES]; |
| |
| /* Gamma mode programmed on the pipe */ |
| u32 gamma_mode; |
| |
| union { |
| /* CSC mode programmed on the pipe */ |
| u32 csc_mode; |
| |
| /* CHV CGM mode */ |
| u32 cgm_mode; |
| }; |
| |
| /* bitmask of visible planes (enum plane_id) */ |
| u8 active_planes; |
| u8 nv12_planes; |
| u8 c8_planes; |
| |
| /* bitmask of planes that will be updated during the commit */ |
| u8 update_planes; |
| |
| struct { |
| u32 enable; |
| u32 gcp; |
| union hdmi_infoframe avi; |
| union hdmi_infoframe spd; |
| union hdmi_infoframe hdmi; |
| union hdmi_infoframe drm; |
| } infoframes; |
| |
| /* HDMI scrambling status */ |
| bool hdmi_scrambling; |
| |
| /* HDMI High TMDS char rate ratio */ |
| bool hdmi_high_tmds_clock_ratio; |
| |
| /* Output format RGB/YCBCR etc */ |
| enum intel_output_format output_format; |
| |
| /* Output down scaling is done in LSPCON device */ |
| bool lspcon_downsampling; |
| |
| /* enable pipe gamma? */ |
| bool gamma_enable; |
| |
| /* enable pipe csc? */ |
| bool csc_enable; |
| |
| /* Display Stream compression state */ |
| struct { |
| bool compression_enable; |
| bool dsc_split; |
| u16 compressed_bpp; |
| u8 slice_count; |
| } dsc_params; |
| struct drm_dsc_config dp_dsc_cfg; |
| |
| /* Forward Error correction State */ |
| bool fec_enable; |
| }; |
| |
| struct intel_crtc { |
| struct drm_crtc base; |
| enum pipe pipe; |
| /* |
| * Whether the crtc and the connected output pipeline is active. Implies |
| * that crtc->enabled is set, i.e. the current mode configuration has |
| * some outputs connected to this crtc. |
| */ |
| bool active; |
| u8 plane_ids_mask; |
| unsigned long long enabled_power_domains; |
| struct intel_overlay *overlay; |
| |
| struct intel_crtc_state *config; |
| |
| /* Access to these should be protected by dev_priv->irq_lock. */ |
| bool cpu_fifo_underrun_disabled; |
| bool pch_fifo_underrun_disabled; |
| |
| /* per-pipe watermark state */ |
| struct { |
| /* watermarks currently being used */ |
| union { |
| struct intel_pipe_wm ilk; |
| struct vlv_wm_state vlv; |
| struct g4x_wm_state g4x; |
| } active; |
| } wm; |
| |
| int scanline_offset; |
| |
| struct { |
| unsigned start_vbl_count; |
| ktime_t start_vbl_time; |
| int min_vbl, max_vbl; |
| int scanline_start; |
| } debug; |
| |
| /* scalers available on this crtc */ |
| int num_scalers; |
| }; |
| |
| struct intel_plane { |
| struct drm_plane base; |
| enum i9xx_plane_id i9xx_plane; |
| enum plane_id id; |
| enum pipe pipe; |
| bool has_fbc; |
| bool has_ccs; |
| u32 frontbuffer_bit; |
| |
| struct { |
| u32 base, cntl, size; |
| } cursor; |
| |
| /* |
| * NOTE: Do not place new plane state fields here (e.g., when adding |
| * new plane properties). New runtime state should now be placed in |
| * the intel_plane_state structure and accessed via plane_state. |
| */ |
| |
| unsigned int (*max_stride)(struct intel_plane *plane, |
| u32 pixel_format, u64 modifier, |
| unsigned int rotation); |
| void (*update_plane)(struct intel_plane *plane, |
| const struct intel_crtc_state *crtc_state, |
| const struct intel_plane_state *plane_state); |
| void (*update_slave)(struct intel_plane *plane, |
| const struct intel_crtc_state *crtc_state, |
| const struct intel_plane_state *plane_state); |
| void (*disable_plane)(struct intel_plane *plane, |
| const struct intel_crtc_state *crtc_state); |
| bool (*get_hw_state)(struct intel_plane *plane, enum pipe *pipe); |
| int (*check_plane)(struct intel_crtc_state *crtc_state, |
| struct intel_plane_state *plane_state); |
| }; |
| |
| struct intel_watermark_params { |
| u16 fifo_size; |
| u16 max_wm; |
| u8 default_wm; |
| u8 guard_size; |
| u8 cacheline_size; |
| }; |
| |
| struct cxsr_latency { |
| bool is_desktop : 1; |
| bool is_ddr3 : 1; |
| u16 fsb_freq; |
| u16 mem_freq; |
| u16 display_sr; |
| u16 display_hpll_disable; |
| u16 cursor_sr; |
| u16 cursor_hpll_disable; |
| }; |
| |
| #define to_intel_atomic_state(x) container_of(x, struct intel_atomic_state, base) |
| #define to_intel_crtc(x) container_of(x, struct intel_crtc, base) |
| #define to_intel_crtc_state(x) container_of(x, struct intel_crtc_state, base) |
| #define to_intel_connector(x) container_of(x, struct intel_connector, base) |
| #define to_intel_encoder(x) container_of(x, struct intel_encoder, base) |
| #define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base) |
| #define to_intel_plane(x) container_of(x, struct intel_plane, base) |
| #define to_intel_plane_state(x) container_of(x, struct intel_plane_state, base) |
| #define intel_fb_obj(x) ((x) ? to_intel_bo((x)->obj[0]) : NULL) |
| |
| struct intel_hdmi { |
| i915_reg_t hdmi_reg; |
| int ddc_bus; |
| struct { |
| enum drm_dp_dual_mode_type type; |
| int max_tmds_clock; |
| } dp_dual_mode; |
| bool has_hdmi_sink; |
| bool has_audio; |
| struct intel_connector *attached_connector; |
| struct cec_notifier *cec_notifier; |
| }; |
| |
| struct intel_dp_mst_encoder; |
| #define DP_MAX_DOWNSTREAM_PORTS 0x10 |
| |
| /* |
| * enum link_m_n_set: |
| * When platform provides two set of M_N registers for dp, we can |
| * program them and switch between them incase of DRRS. |
| * But When only one such register is provided, we have to program the |
| * required divider value on that registers itself based on the DRRS state. |
| * |
| * M1_N1 : Program dp_m_n on M1_N1 registers |
| * dp_m2_n2 on M2_N2 registers (If supported) |
| * |
| * M2_N2 : Program dp_m2_n2 on M1_N1 registers |
| * M2_N2 registers are not supported |
| */ |
| |
| enum link_m_n_set { |
| /* Sets the m1_n1 and m2_n2 */ |
| M1_N1 = 0, |
| M2_N2 |
| }; |
| |
| struct intel_dp_compliance_data { |
| unsigned long edid; |
| u8 video_pattern; |
| u16 hdisplay, vdisplay; |
| u8 bpc; |
| }; |
| |
| struct intel_dp_compliance { |
| unsigned long test_type; |
| struct intel_dp_compliance_data test_data; |
| bool test_active; |
| int test_link_rate; |
| u8 test_lane_count; |
| }; |
| |
| struct intel_dp { |
| i915_reg_t output_reg; |
| u32 DP; |
| int link_rate; |
| u8 lane_count; |
| u8 sink_count; |
| bool link_mst; |
| bool link_trained; |
| bool has_audio; |
| bool reset_link_params; |
| u8 dpcd[DP_RECEIVER_CAP_SIZE]; |
| u8 psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE]; |
| u8 downstream_ports[DP_MAX_DOWNSTREAM_PORTS]; |
| u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE]; |
| u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]; |
| u8 fec_capable; |
| /* source rates */ |
| int num_source_rates; |
| const int *source_rates; |
| /* sink rates as reported by DP_MAX_LINK_RATE/DP_SUPPORTED_LINK_RATES */ |
| int num_sink_rates; |
| int sink_rates[DP_MAX_SUPPORTED_RATES]; |
| bool use_rate_select; |
| /* intersection of source and sink rates */ |
| int num_common_rates; |
| int common_rates[DP_MAX_SUPPORTED_RATES]; |
| /* Max lane count for the current link */ |
| int max_link_lane_count; |
| /* Max rate for the current link */ |
| int max_link_rate; |
| /* sink or branch descriptor */ |
| struct drm_dp_desc desc; |
| struct drm_dp_aux aux; |
| u8 train_set[4]; |
| int panel_power_up_delay; |
| int panel_power_down_delay; |
| int panel_power_cycle_delay; |
| int backlight_on_delay; |
| int backlight_off_delay; |
| struct delayed_work panel_vdd_work; |
| bool want_panel_vdd; |
| unsigned long last_power_on; |
| unsigned long last_backlight_off; |
| ktime_t panel_power_off_time; |
| |
| struct notifier_block edp_notifier; |
| |
| /* |
| * Pipe whose power sequencer is currently locked into |
| * this port. Only relevant on VLV/CHV. |
| */ |
| enum pipe pps_pipe; |
| /* |
| * Pipe currently driving the port. Used for preventing |
| * the use of the PPS for any pipe currentrly driving |
| * external DP as that will mess things up on VLV. |
| */ |
| enum pipe active_pipe; |
| /* |
| * Set if the sequencer may be reset due to a power transition, |
| * requiring a reinitialization. Only relevant on BXT. |
| */ |
| bool pps_reset; |
| struct edp_power_seq pps_delays; |
| |
| bool can_mst; /* this port supports mst */ |
| bool is_mst; |
| int active_mst_links; |
| /* connector directly attached - won't be use for modeset in mst world */ |
| struct intel_connector *attached_connector; |
| |
| /* mst connector list */ |
| struct intel_dp_mst_encoder *mst_encoders[I915_MAX_PIPES]; |
| struct drm_dp_mst_topology_mgr mst_mgr; |
| |
| u32 (*get_aux_clock_divider)(struct intel_dp *dp, int index); |
| /* |
| * This function returns the value we have to program the AUX_CTL |
| * register with to kick off an AUX transaction. |
| */ |
| u32 (*get_aux_send_ctl)(struct intel_dp *dp, int send_bytes, |
| u32 aux_clock_divider); |
| |
| i915_reg_t (*aux_ch_ctl_reg)(struct intel_dp *dp); |
| i915_reg_t (*aux_ch_data_reg)(struct intel_dp *dp, int index); |
| |
| /* This is called before a link training is starterd */ |
| void (*prepare_link_retrain)(struct intel_dp *intel_dp); |
| |
| /* Displayport compliance testing */ |
| struct intel_dp_compliance compliance; |
| |
| /* Display stream compression testing */ |
| bool force_dsc_en; |
| }; |
| |
| enum lspcon_vendor { |
| LSPCON_VENDOR_MCA, |
| LSPCON_VENDOR_PARADE |
| }; |
| |
| struct intel_lspcon { |
| bool active; |
| enum drm_lspcon_mode mode; |
| enum lspcon_vendor vendor; |
| }; |
| |
| struct intel_digital_port { |
| struct intel_encoder base; |
| u32 saved_port_bits; |
| struct intel_dp dp; |
| struct intel_hdmi hdmi; |
| struct intel_lspcon lspcon; |
| enum irqreturn (*hpd_pulse)(struct intel_digital_port *, bool); |
| bool release_cl2_override; |
| u8 max_lanes; |
| /* Used for DP and ICL+ TypeC/DP and TypeC/HDMI ports. */ |
| enum aux_ch aux_ch; |
| enum intel_display_power_domain ddi_io_power_domain; |
| bool tc_legacy_port:1; |
| enum tc_port_type tc_type; |
| |
| void (*write_infoframe)(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| unsigned int type, |
| const void *frame, ssize_t len); |
| void (*read_infoframe)(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| unsigned int type, |
| void *frame, ssize_t len); |
| void (*set_infoframes)(struct intel_encoder *encoder, |
| bool enable, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state); |
| u32 (*infoframes_enabled)(struct intel_encoder *encoder, |
| const struct intel_crtc_state *pipe_config); |
| }; |
| |
| struct intel_dp_mst_encoder { |
| struct intel_encoder base; |
| enum pipe pipe; |
| struct intel_digital_port *primary; |
| struct intel_connector *connector; |
| }; |
| |
| static inline enum dpio_channel |
| vlv_dport_to_channel(struct intel_digital_port *dport) |
| { |
| switch (dport->base.port) { |
| case PORT_B: |
| case PORT_D: |
| return DPIO_CH0; |
| case PORT_C: |
| return DPIO_CH1; |
| default: |
| BUG(); |
| } |
| } |
| |
| static inline enum dpio_phy |
| vlv_dport_to_phy(struct intel_digital_port *dport) |
| { |
| switch (dport->base.port) { |
| case PORT_B: |
| case PORT_C: |
| return DPIO_PHY0; |
| case PORT_D: |
| return DPIO_PHY1; |
| default: |
| BUG(); |
| } |
| } |
| |
| static inline enum dpio_channel |
| vlv_pipe_to_channel(enum pipe pipe) |
| { |
| switch (pipe) { |
| case PIPE_A: |
| case PIPE_C: |
| return DPIO_CH0; |
| case PIPE_B: |
| return DPIO_CH1; |
| default: |
| BUG(); |
| } |
| } |
| |
| static inline struct intel_crtc * |
| intel_get_crtc_for_pipe(struct drm_i915_private *dev_priv, enum pipe pipe) |
| { |
| return dev_priv->pipe_to_crtc_mapping[pipe]; |
| } |
| |
| static inline struct intel_crtc * |
| intel_get_crtc_for_plane(struct drm_i915_private *dev_priv, enum i9xx_plane_id plane) |
| { |
| return dev_priv->plane_to_crtc_mapping[plane]; |
| } |
| |
| struct intel_load_detect_pipe { |
| struct drm_atomic_state *restore_state; |
| }; |
| |
| static inline struct intel_encoder * |
| intel_attached_encoder(struct drm_connector *connector) |
| { |
| return to_intel_connector(connector)->encoder; |
| } |
| |
| static inline bool intel_encoder_is_dig_port(struct intel_encoder *encoder) |
| { |
| switch (encoder->type) { |
| case INTEL_OUTPUT_DDI: |
| case INTEL_OUTPUT_DP: |
| case INTEL_OUTPUT_EDP: |
| case INTEL_OUTPUT_HDMI: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static inline struct intel_digital_port * |
| enc_to_dig_port(struct drm_encoder *encoder) |
| { |
| struct intel_encoder *intel_encoder = to_intel_encoder(encoder); |
| |
| if (intel_encoder_is_dig_port(intel_encoder)) |
| return container_of(encoder, struct intel_digital_port, |
| base.base); |
| else |
| return NULL; |
| } |
| |
| static inline struct intel_digital_port * |
| conn_to_dig_port(struct intel_connector *connector) |
| { |
| return enc_to_dig_port(&intel_attached_encoder(&connector->base)->base); |
| } |
| |
| static inline struct intel_dp_mst_encoder * |
| enc_to_mst(struct drm_encoder *encoder) |
| { |
| return container_of(encoder, struct intel_dp_mst_encoder, base.base); |
| } |
| |
| static inline struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder) |
| { |
| return &enc_to_dig_port(encoder)->dp; |
| } |
| |
| static inline bool intel_encoder_is_dp(struct intel_encoder *encoder) |
| { |
| switch (encoder->type) { |
| case INTEL_OUTPUT_DP: |
| case INTEL_OUTPUT_EDP: |
| return true; |
| case INTEL_OUTPUT_DDI: |
| /* Skip pure HDMI/DVI DDI encoders */ |
| return i915_mmio_reg_valid(enc_to_intel_dp(&encoder->base)->output_reg); |
| default: |
| return false; |
| } |
| } |
| |
| static inline struct intel_lspcon * |
| enc_to_intel_lspcon(struct drm_encoder *encoder) |
| { |
| return &enc_to_dig_port(encoder)->lspcon; |
| } |
| |
| static inline struct intel_digital_port * |
| dp_to_dig_port(struct intel_dp *intel_dp) |
| { |
| return container_of(intel_dp, struct intel_digital_port, dp); |
| } |
| |
| static inline struct intel_lspcon * |
| dp_to_lspcon(struct intel_dp *intel_dp) |
| { |
| return &dp_to_dig_port(intel_dp)->lspcon; |
| } |
| |
| static inline struct drm_i915_private * |
| dp_to_i915(struct intel_dp *intel_dp) |
| { |
| return to_i915(dp_to_dig_port(intel_dp)->base.base.dev); |
| } |
| |
| static inline struct intel_digital_port * |
| hdmi_to_dig_port(struct intel_hdmi *intel_hdmi) |
| { |
| return container_of(intel_hdmi, struct intel_digital_port, hdmi); |
| } |
| |
| static inline struct intel_plane_state * |
| intel_atomic_get_plane_state(struct intel_atomic_state *state, |
| struct intel_plane *plane) |
| { |
| struct drm_plane_state *ret = |
| drm_atomic_get_plane_state(&state->base, &plane->base); |
| |
| if (IS_ERR(ret)) |
| return ERR_CAST(ret); |
| |
| return to_intel_plane_state(ret); |
| } |
| |
| static inline struct intel_plane_state * |
| intel_atomic_get_old_plane_state(struct intel_atomic_state *state, |
| struct intel_plane *plane) |
| { |
| return to_intel_plane_state(drm_atomic_get_old_plane_state(&state->base, |
| &plane->base)); |
| } |
| |
| static inline struct intel_plane_state * |
| intel_atomic_get_new_plane_state(struct intel_atomic_state *state, |
| struct intel_plane *plane) |
| { |
| return to_intel_plane_state(drm_atomic_get_new_plane_state(&state->base, |
| &plane->base)); |
| } |
| |
| static inline struct intel_crtc_state * |
| intel_atomic_get_old_crtc_state(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| return to_intel_crtc_state(drm_atomic_get_old_crtc_state(&state->base, |
| &crtc->base)); |
| } |
| |
| static inline struct intel_crtc_state * |
| intel_atomic_get_new_crtc_state(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| return to_intel_crtc_state(drm_atomic_get_new_crtc_state(&state->base, |
| &crtc->base)); |
| } |
| |
| /* intel_display.c */ |
| void intel_plane_destroy(struct drm_plane *plane); |
| void i830_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe); |
| void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe); |
| enum pipe intel_crtc_pch_transcoder(struct intel_crtc *crtc); |
| int vlv_get_hpll_vco(struct drm_i915_private *dev_priv); |
| int vlv_get_cck_clock(struct drm_i915_private *dev_priv, |
| const char *name, u32 reg, int ref_freq); |
| int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv, |
| const char *name, u32 reg); |
| void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv); |
| void lpt_disable_iclkip(struct drm_i915_private *dev_priv); |
| void intel_init_display_hooks(struct drm_i915_private *dev_priv); |
| unsigned int intel_fb_xy_to_linear(int x, int y, |
| const struct intel_plane_state *state, |
| int plane); |
| unsigned int intel_fb_align_height(const struct drm_framebuffer *fb, |
| int color_plane, unsigned int height); |
| void intel_add_fb_offsets(int *x, int *y, |
| const struct intel_plane_state *state, int plane); |
| unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info); |
| unsigned int intel_remapped_info_size(const struct intel_remapped_info *rem_info); |
| bool intel_has_pending_fb_unpin(struct drm_i915_private *dev_priv); |
| int intel_display_suspend(struct drm_device *dev); |
| void intel_pps_unlock_regs_wa(struct drm_i915_private *dev_priv); |
| void intel_encoder_destroy(struct drm_encoder *encoder); |
| struct drm_display_mode * |
| intel_encoder_current_mode(struct intel_encoder *encoder); |
| bool intel_port_is_combophy(struct drm_i915_private *dev_priv, enum port port); |
| bool intel_port_is_tc(struct drm_i915_private *dev_priv, enum port port); |
| enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv, |
| enum port port); |
| int intel_get_pipe_from_crtc_id_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv); |
| enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv, |
| enum pipe pipe); |
| static inline bool |
| intel_crtc_has_type(const struct intel_crtc_state *crtc_state, |
| enum intel_output_type type) |
| { |
| return crtc_state->output_types & (1 << type); |
| } |
| static inline bool |
| intel_crtc_has_dp_encoder(const struct intel_crtc_state *crtc_state) |
| { |
| return crtc_state->output_types & |
| ((1 << INTEL_OUTPUT_DP) | |
| (1 << INTEL_OUTPUT_DP_MST) | |
| (1 << INTEL_OUTPUT_EDP)); |
| } |
| static inline void |
| intel_wait_for_vblank(struct drm_i915_private *dev_priv, enum pipe pipe) |
| { |
| drm_wait_one_vblank(&dev_priv->drm, pipe); |
| } |
| static inline void |
| intel_wait_for_vblank_if_active(struct drm_i915_private *dev_priv, int pipe) |
| { |
| const struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe); |
| |
| if (crtc->active) |
| intel_wait_for_vblank(dev_priv, pipe); |
| } |
| |
| u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc); |
| |
| int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp); |
| void vlv_wait_port_ready(struct drm_i915_private *dev_priv, |
| struct intel_digital_port *dport, |
| unsigned int expected_mask); |
| int intel_get_load_detect_pipe(struct drm_connector *connector, |
| const struct drm_display_mode *mode, |
| struct intel_load_detect_pipe *old, |
| struct drm_modeset_acquire_ctx *ctx); |
| void intel_release_load_detect_pipe(struct drm_connector *connector, |
| struct intel_load_detect_pipe *old, |
| struct drm_modeset_acquire_ctx *ctx); |
| struct i915_vma * |
| intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb, |
| const struct i915_ggtt_view *view, |
| bool uses_fence, |
| unsigned long *out_flags); |
| void intel_unpin_fb_vma(struct i915_vma *vma, unsigned long flags); |
| struct drm_framebuffer * |
| intel_framebuffer_create(struct drm_i915_gem_object *obj, |
| struct drm_mode_fb_cmd2 *mode_cmd); |
| int intel_prepare_plane_fb(struct drm_plane *plane, |
| struct drm_plane_state *new_state); |
| void intel_cleanup_plane_fb(struct drm_plane *plane, |
| struct drm_plane_state *old_state); |
| |
| void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv, |
| enum pipe pipe); |
| |
| int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe, |
| const struct dpll *dpll); |
| void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe); |
| int lpt_get_iclkip(struct drm_i915_private *dev_priv); |
| bool intel_fuzzy_clock_check(int clock1, int clock2); |
| |
| /* modesetting asserts */ |
| void assert_panel_unlocked(struct drm_i915_private *dev_priv, |
| enum pipe pipe); |
| void assert_pll(struct drm_i915_private *dev_priv, |
| enum pipe pipe, bool state); |
| #define assert_pll_enabled(d, p) assert_pll(d, p, true) |
| #define assert_pll_disabled(d, p) assert_pll(d, p, false) |
| void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state); |
| #define assert_dsi_pll_enabled(d) assert_dsi_pll(d, true) |
| #define assert_dsi_pll_disabled(d) assert_dsi_pll(d, false) |
| void assert_fdi_rx_pll(struct drm_i915_private *dev_priv, |
| enum pipe pipe, bool state); |
| #define assert_fdi_rx_pll_enabled(d, p) assert_fdi_rx_pll(d, p, true) |
| #define assert_fdi_rx_pll_disabled(d, p) assert_fdi_rx_pll(d, p, false) |
| void assert_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, bool state); |
| #define assert_pipe_enabled(d, p) assert_pipe(d, p, true) |
| #define assert_pipe_disabled(d, p) assert_pipe(d, p, false) |
| void intel_prepare_reset(struct drm_i915_private *dev_priv); |
| void intel_finish_reset(struct drm_i915_private *dev_priv); |
| void intel_dp_get_m_n(struct intel_crtc *crtc, |
| struct intel_crtc_state *pipe_config); |
| void intel_dp_set_m_n(const struct intel_crtc_state *crtc_state, |
| enum link_m_n_set m_n); |
| void intel_dp_ycbcr_420_enable(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state); |
| int intel_dotclock_calculate(int link_freq, const struct intel_link_m_n *m_n); |
| bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state, |
| struct dpll *best_clock); |
| int chv_calc_dpll_params(int refclk, struct dpll *pll_clock); |
| |
| bool intel_crtc_active(struct intel_crtc *crtc); |
| bool hsw_crtc_state_ips_capable(const struct intel_crtc_state *crtc_state); |
| void hsw_enable_ips(const struct intel_crtc_state *crtc_state); |
| void hsw_disable_ips(const struct intel_crtc_state *crtc_state); |
| enum intel_display_power_domain intel_port_to_power_domain(enum port port); |
| enum intel_display_power_domain |
| intel_aux_power_domain(struct intel_digital_port *dig_port); |
| void intel_mode_from_pipe_config(struct drm_display_mode *mode, |
| struct intel_crtc_state *pipe_config); |
| void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc, |
| struct intel_crtc_state *crtc_state); |
| |
| u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_center); |
| int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state); |
| int skl_max_scale(const struct intel_crtc_state *crtc_state, |
| u32 pixel_format); |
| |
| static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state) |
| { |
| return i915_ggtt_offset(state->vma); |
| } |
| |
| u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state, |
| const struct intel_plane_state *plane_state); |
| u32 glk_plane_color_ctl_crtc(const struct intel_crtc_state *crtc_state); |
| u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state, |
| const struct intel_plane_state *plane_state); |
| u32 skl_plane_ctl_crtc(const struct intel_crtc_state *crtc_state); |
| u32 skl_plane_stride(const struct intel_plane_state *plane_state, |
| int plane); |
| int skl_check_plane_surface(struct intel_plane_state *plane_state); |
| int i9xx_check_plane_surface(struct intel_plane_state *plane_state); |
| int skl_format_to_fourcc(int format, bool rgb_order, bool alpha); |
| unsigned int i9xx_plane_max_stride(struct intel_plane *plane, |
| u32 pixel_format, u64 modifier, |
| unsigned int rotation); |
| int bdw_get_pipemisc_bpp(struct intel_crtc *crtc); |
| |
| #endif /* __INTEL_DRV_H__ */ |