| /***********************license start*************** |
| * Author: Cavium Networks |
| * |
| * Contact: support@caviumnetworks.com |
| * This file is part of the OCTEON SDK |
| * |
| * Copyright (c) 2003-2008 Cavium Networks |
| * |
| * This file is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, Version 2, as |
| * published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, but |
| * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or |
| * NONINFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this file; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * or visit http://www.gnu.org/licenses/. |
| * |
| * This file may also be available under a different license from Cavium. |
| * Contact Cavium Networks for more information |
| ***********************license end**************************************/ |
| |
| /* |
| * |
| * Helper functions to abstract board specific data about |
| * network ports from the rest of the cvmx-helper files. |
| */ |
| |
| #include <asm/octeon/octeon.h> |
| #include <asm/octeon/cvmx-bootinfo.h> |
| |
| #include "cvmx-config.h" |
| |
| #include "cvmx-mdio.h" |
| |
| #include "cvmx-helper.h" |
| #include "cvmx-helper-util.h" |
| #include "cvmx-helper-board.h" |
| |
| #include "cvmx-gmxx-defs.h" |
| #include "cvmx-asxx-defs.h" |
| |
| /** |
| * cvmx_override_board_link_get(int ipd_port) is a function |
| * pointer. It is meant to allow customization of the process of |
| * talking to a PHY to determine link speed. It is called every |
| * time a PHY must be polled for link status. Users should set |
| * this pointer to a function before calling any cvmx-helper |
| * operations. |
| */ |
| cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port) = |
| NULL; |
| |
| /** |
| * Return the MII PHY address associated with the given IPD |
| * port. A result of -1 means there isn't a MII capable PHY |
| * connected to this port. On chips supporting multiple MII |
| * busses the bus number is encoded in bits <15:8>. |
| * |
| * This function must be modified for every new Octeon board. |
| * Internally it uses switch statements based on the cvmx_sysinfo |
| * data to determine board types and revisions. It replies on the |
| * fact that every Octeon board receives a unique board type |
| * enumeration from the bootloader. |
| * |
| * @ipd_port: Octeon IPD port to get the MII address for. |
| * |
| * Returns MII PHY address and bus number or -1. |
| */ |
| int cvmx_helper_board_get_mii_address(int ipd_port) |
| { |
| switch (cvmx_sysinfo_get()->board_type) { |
| case CVMX_BOARD_TYPE_SIM: |
| /* Simulator doesn't have MII */ |
| return -1; |
| case CVMX_BOARD_TYPE_EBT3000: |
| case CVMX_BOARD_TYPE_EBT5800: |
| case CVMX_BOARD_TYPE_THUNDER: |
| case CVMX_BOARD_TYPE_NICPRO2: |
| /* Interface 0 is SPI4, interface 1 is RGMII */ |
| if ((ipd_port >= 16) && (ipd_port < 20)) |
| return ipd_port - 16; |
| else |
| return -1; |
| case CVMX_BOARD_TYPE_KODAMA: |
| case CVMX_BOARD_TYPE_EBH3100: |
| case CVMX_BOARD_TYPE_HIKARI: |
| case CVMX_BOARD_TYPE_CN3010_EVB_HS5: |
| case CVMX_BOARD_TYPE_CN3005_EVB_HS5: |
| case CVMX_BOARD_TYPE_CN3020_EVB_HS5: |
| /* |
| * Port 0 is WAN connected to a PHY, Port 1 is GMII |
| * connected to a switch |
| */ |
| if (ipd_port == 0) |
| return 4; |
| else if (ipd_port == 1) |
| return 9; |
| else |
| return -1; |
| case CVMX_BOARD_TYPE_NAC38: |
| /* Board has 8 RGMII ports PHYs are 0-7 */ |
| if ((ipd_port >= 0) && (ipd_port < 4)) |
| return ipd_port; |
| else if ((ipd_port >= 16) && (ipd_port < 20)) |
| return ipd_port - 16 + 4; |
| else |
| return -1; |
| case CVMX_BOARD_TYPE_EBH3000: |
| /* Board has dual SPI4 and no PHYs */ |
| return -1; |
| case CVMX_BOARD_TYPE_EBH5200: |
| case CVMX_BOARD_TYPE_EBH5201: |
| case CVMX_BOARD_TYPE_EBT5200: |
| /* |
| * Board has 4 SGMII ports. The PHYs start right after the MII |
| * ports MII0 = 0, MII1 = 1, SGMII = 2-5. |
| */ |
| if ((ipd_port >= 0) && (ipd_port < 4)) |
| return ipd_port + 2; |
| else |
| return -1; |
| case CVMX_BOARD_TYPE_EBH5600: |
| case CVMX_BOARD_TYPE_EBH5601: |
| case CVMX_BOARD_TYPE_EBH5610: |
| /* |
| * Board has 8 SGMII ports. 4 connect out, two connect |
| * to a switch, and 2 loop to each other |
| */ |
| if ((ipd_port >= 0) && (ipd_port < 4)) |
| return ipd_port + 1; |
| else |
| return -1; |
| case CVMX_BOARD_TYPE_CUST_NB5: |
| if (ipd_port == 2) |
| return 4; |
| else |
| return -1; |
| case CVMX_BOARD_TYPE_NIC_XLE_4G: |
| /* Board has 4 SGMII ports. connected QLM3(interface 1) */ |
| if ((ipd_port >= 16) && (ipd_port < 20)) |
| return ipd_port - 16 + 1; |
| else |
| return -1; |
| case CVMX_BOARD_TYPE_BBGW_REF: |
| /* |
| * No PHYs are connected to Octeon, everything is |
| * through switch. |
| */ |
| return -1; |
| |
| case CVMX_BOARD_TYPE_CUST_WSX16: |
| if (ipd_port >= 0 && ipd_port <= 3) |
| return ipd_port; |
| else if (ipd_port >= 16 && ipd_port <= 19) |
| return ipd_port - 16 + 4; |
| else |
| return -1; |
| } |
| |
| /* Some unknown board. Somebody forgot to update this function... */ |
| cvmx_dprintf |
| ("cvmx_helper_board_get_mii_address: Unknown board type %d\n", |
| cvmx_sysinfo_get()->board_type); |
| return -1; |
| } |
| |
| /** |
| * This function is the board specific method of determining an |
| * ethernet ports link speed. Most Octeon boards have Marvell PHYs |
| * and are handled by the fall through case. This function must be |
| * updated for boards that don't have the normal Marvell PHYs. |
| * |
| * This function must be modified for every new Octeon board. |
| * Internally it uses switch statements based on the cvmx_sysinfo |
| * data to determine board types and revisions. It relies on the |
| * fact that every Octeon board receives a unique board type |
| * enumeration from the bootloader. |
| * |
| * @ipd_port: IPD input port associated with the port we want to get link |
| * status for. |
| * |
| * Returns The ports link status. If the link isn't fully resolved, this must |
| * return zero. |
| */ |
| cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) |
| { |
| cvmx_helper_link_info_t result; |
| int phy_addr; |
| int is_broadcom_phy = 0; |
| |
| /* Give the user a chance to override the processing of this function */ |
| if (cvmx_override_board_link_get) |
| return cvmx_override_board_link_get(ipd_port); |
| |
| /* Unless we fix it later, all links are defaulted to down */ |
| result.u64 = 0; |
| |
| /* |
| * This switch statement should handle all ports that either don't use |
| * Marvell PHYS, or don't support in-band status. |
| */ |
| switch (cvmx_sysinfo_get()->board_type) { |
| case CVMX_BOARD_TYPE_SIM: |
| /* The simulator gives you a simulated 1Gbps full duplex link */ |
| result.s.link_up = 1; |
| result.s.full_duplex = 1; |
| result.s.speed = 1000; |
| return result; |
| case CVMX_BOARD_TYPE_EBH3100: |
| case CVMX_BOARD_TYPE_CN3010_EVB_HS5: |
| case CVMX_BOARD_TYPE_CN3005_EVB_HS5: |
| case CVMX_BOARD_TYPE_CN3020_EVB_HS5: |
| /* Port 1 on these boards is always Gigabit */ |
| if (ipd_port == 1) { |
| result.s.link_up = 1; |
| result.s.full_duplex = 1; |
| result.s.speed = 1000; |
| return result; |
| } |
| /* Fall through to the generic code below */ |
| break; |
| case CVMX_BOARD_TYPE_CUST_NB5: |
| /* Port 1 on these boards is always Gigabit */ |
| if (ipd_port == 1) { |
| result.s.link_up = 1; |
| result.s.full_duplex = 1; |
| result.s.speed = 1000; |
| return result; |
| } else /* The other port uses a broadcom PHY */ |
| is_broadcom_phy = 1; |
| break; |
| case CVMX_BOARD_TYPE_BBGW_REF: |
| /* Port 1 on these boards is always Gigabit */ |
| if (ipd_port == 2) { |
| /* Port 2 is not hooked up */ |
| result.u64 = 0; |
| return result; |
| } else { |
| /* Ports 0 and 1 connect to the switch */ |
| result.s.link_up = 1; |
| result.s.full_duplex = 1; |
| result.s.speed = 1000; |
| return result; |
| } |
| break; |
| } |
| |
| phy_addr = cvmx_helper_board_get_mii_address(ipd_port); |
| if (phy_addr != -1) { |
| if (is_broadcom_phy) { |
| /* |
| * Below we are going to read SMI/MDIO |
| * register 0x19 which works on Broadcom |
| * parts |
| */ |
| int phy_status = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| 0x19); |
| switch ((phy_status >> 8) & 0x7) { |
| case 0: |
| result.u64 = 0; |
| break; |
| case 1: |
| result.s.link_up = 1; |
| result.s.full_duplex = 0; |
| result.s.speed = 10; |
| break; |
| case 2: |
| result.s.link_up = 1; |
| result.s.full_duplex = 1; |
| result.s.speed = 10; |
| break; |
| case 3: |
| result.s.link_up = 1; |
| result.s.full_duplex = 0; |
| result.s.speed = 100; |
| break; |
| case 4: |
| result.s.link_up = 1; |
| result.s.full_duplex = 1; |
| result.s.speed = 100; |
| break; |
| case 5: |
| result.s.link_up = 1; |
| result.s.full_duplex = 1; |
| result.s.speed = 100; |
| break; |
| case 6: |
| result.s.link_up = 1; |
| result.s.full_duplex = 0; |
| result.s.speed = 1000; |
| break; |
| case 7: |
| result.s.link_up = 1; |
| result.s.full_duplex = 1; |
| result.s.speed = 1000; |
| break; |
| } |
| } else { |
| /* |
| * This code assumes we are using a Marvell |
| * Gigabit PHY. All the speed information can |
| * be read from register 17 in one |
| * go. Somebody using a different PHY will |
| * need to handle it above in the board |
| * specific area. |
| */ |
| int phy_status = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17); |
| |
| /* |
| * If the resolve bit 11 isn't set, see if |
| * autoneg is turned off (bit 12, reg 0). The |
| * resolve bit doesn't get set properly when |
| * autoneg is off, so force it. |
| */ |
| if ((phy_status & (1 << 11)) == 0) { |
| int auto_status = |
| cvmx_mdio_read(phy_addr >> 8, |
| phy_addr & 0xff, 0); |
| if ((auto_status & (1 << 12)) == 0) |
| phy_status |= 1 << 11; |
| } |
| |
| /* |
| * Only return a link if the PHY has finished |
| * auto negotiation and set the resolved bit |
| * (bit 11) |
| */ |
| if (phy_status & (1 << 11)) { |
| result.s.link_up = 1; |
| result.s.full_duplex = ((phy_status >> 13) & 1); |
| switch ((phy_status >> 14) & 3) { |
| case 0: /* 10 Mbps */ |
| result.s.speed = 10; |
| break; |
| case 1: /* 100 Mbps */ |
| result.s.speed = 100; |
| break; |
| case 2: /* 1 Gbps */ |
| result.s.speed = 1000; |
| break; |
| case 3: /* Illegal */ |
| result.u64 = 0; |
| break; |
| } |
| } |
| } |
| } else if (OCTEON_IS_MODEL(OCTEON_CN3XXX) |
| || OCTEON_IS_MODEL(OCTEON_CN58XX) |
| || OCTEON_IS_MODEL(OCTEON_CN50XX)) { |
| /* |
| * We don't have a PHY address, so attempt to use |
| * in-band status. It is really important that boards |
| * not supporting in-band status never get |
| * here. Reading broken in-band status tends to do bad |
| * things |
| */ |
| union cvmx_gmxx_rxx_rx_inbnd inband_status; |
| int interface = cvmx_helper_get_interface_num(ipd_port); |
| int index = cvmx_helper_get_interface_index_num(ipd_port); |
| inband_status.u64 = |
| cvmx_read_csr(CVMX_GMXX_RXX_RX_INBND(index, interface)); |
| |
| result.s.link_up = inband_status.s.status; |
| result.s.full_duplex = inband_status.s.duplex; |
| switch (inband_status.s.speed) { |
| case 0: /* 10 Mbps */ |
| result.s.speed = 10; |
| break; |
| case 1: /* 100 Mbps */ |
| result.s.speed = 100; |
| break; |
| case 2: /* 1 Gbps */ |
| result.s.speed = 1000; |
| break; |
| case 3: /* Illegal */ |
| result.u64 = 0; |
| break; |
| } |
| } else { |
| /* |
| * We don't have a PHY address and we don't have |
| * in-band status. There is no way to determine the |
| * link speed. Return down assuming this port isn't |
| * wired |
| */ |
| result.u64 = 0; |
| } |
| |
| /* If link is down, return all fields as zero. */ |
| if (!result.s.link_up) |
| result.u64 = 0; |
| |
| return result; |
| } |
| |
| /** |
| * This function as a board specific method of changing the PHY |
| * speed, duplex, and auto-negotiation. This programs the PHY and |
| * not Octeon. This can be used to force Octeon's links to |
| * specific settings. |
| * |
| * @phy_addr: The address of the PHY to program |
| * @enable_autoneg: |
| * Non zero if you want to enable auto-negotiation. |
| * @link_info: Link speed to program. If the speed is zero and auto-negotiation |
| * is enabled, all possible negotiation speeds are advertised. |
| * |
| * Returns Zero on success, negative on failure |
| */ |
| int cvmx_helper_board_link_set_phy(int phy_addr, |
| cvmx_helper_board_set_phy_link_flags_types_t |
| link_flags, |
| cvmx_helper_link_info_t link_info) |
| { |
| |
| /* Set the flow control settings based on link_flags */ |
| if ((link_flags & set_phy_link_flags_flow_control_mask) != |
| set_phy_link_flags_flow_control_dont_touch) { |
| cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver; |
| reg_autoneg_adver.u16 = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_AUTONEG_ADVER); |
| reg_autoneg_adver.s.asymmetric_pause = |
| (link_flags & set_phy_link_flags_flow_control_mask) == |
| set_phy_link_flags_flow_control_enable; |
| reg_autoneg_adver.s.pause = |
| (link_flags & set_phy_link_flags_flow_control_mask) == |
| set_phy_link_flags_flow_control_enable; |
| cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_AUTONEG_ADVER, |
| reg_autoneg_adver.u16); |
| } |
| |
| /* If speed isn't set and autoneg is on advertise all supported modes */ |
| if ((link_flags & set_phy_link_flags_autoneg) |
| && (link_info.s.speed == 0)) { |
| cvmx_mdio_phy_reg_control_t reg_control; |
| cvmx_mdio_phy_reg_status_t reg_status; |
| cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver; |
| cvmx_mdio_phy_reg_extended_status_t reg_extended_status; |
| cvmx_mdio_phy_reg_control_1000_t reg_control_1000; |
| |
| reg_status.u16 = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_STATUS); |
| reg_autoneg_adver.u16 = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_AUTONEG_ADVER); |
| reg_autoneg_adver.s.advert_100base_t4 = |
| reg_status.s.capable_100base_t4; |
| reg_autoneg_adver.s.advert_10base_tx_full = |
| reg_status.s.capable_10_full; |
| reg_autoneg_adver.s.advert_10base_tx_half = |
| reg_status.s.capable_10_half; |
| reg_autoneg_adver.s.advert_100base_tx_full = |
| reg_status.s.capable_100base_x_full; |
| reg_autoneg_adver.s.advert_100base_tx_half = |
| reg_status.s.capable_100base_x_half; |
| cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_AUTONEG_ADVER, |
| reg_autoneg_adver.u16); |
| if (reg_status.s.capable_extended_status) { |
| reg_extended_status.u16 = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_EXTENDED_STATUS); |
| reg_control_1000.u16 = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_CONTROL_1000); |
| reg_control_1000.s.advert_1000base_t_full = |
| reg_extended_status.s.capable_1000base_t_full; |
| reg_control_1000.s.advert_1000base_t_half = |
| reg_extended_status.s.capable_1000base_t_half; |
| cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_CONTROL_1000, |
| reg_control_1000.u16); |
| } |
| reg_control.u16 = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_CONTROL); |
| reg_control.s.autoneg_enable = 1; |
| reg_control.s.restart_autoneg = 1; |
| cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16); |
| } else if ((link_flags & set_phy_link_flags_autoneg)) { |
| cvmx_mdio_phy_reg_control_t reg_control; |
| cvmx_mdio_phy_reg_status_t reg_status; |
| cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver; |
| cvmx_mdio_phy_reg_extended_status_t reg_extended_status; |
| cvmx_mdio_phy_reg_control_1000_t reg_control_1000; |
| |
| reg_status.u16 = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_STATUS); |
| reg_autoneg_adver.u16 = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_AUTONEG_ADVER); |
| reg_autoneg_adver.s.advert_100base_t4 = 0; |
| reg_autoneg_adver.s.advert_10base_tx_full = 0; |
| reg_autoneg_adver.s.advert_10base_tx_half = 0; |
| reg_autoneg_adver.s.advert_100base_tx_full = 0; |
| reg_autoneg_adver.s.advert_100base_tx_half = 0; |
| if (reg_status.s.capable_extended_status) { |
| reg_extended_status.u16 = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_EXTENDED_STATUS); |
| reg_control_1000.u16 = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_CONTROL_1000); |
| reg_control_1000.s.advert_1000base_t_full = 0; |
| reg_control_1000.s.advert_1000base_t_half = 0; |
| } |
| switch (link_info.s.speed) { |
| case 10: |
| reg_autoneg_adver.s.advert_10base_tx_full = |
| link_info.s.full_duplex; |
| reg_autoneg_adver.s.advert_10base_tx_half = |
| !link_info.s.full_duplex; |
| break; |
| case 100: |
| reg_autoneg_adver.s.advert_100base_tx_full = |
| link_info.s.full_duplex; |
| reg_autoneg_adver.s.advert_100base_tx_half = |
| !link_info.s.full_duplex; |
| break; |
| case 1000: |
| reg_control_1000.s.advert_1000base_t_full = |
| link_info.s.full_duplex; |
| reg_control_1000.s.advert_1000base_t_half = |
| !link_info.s.full_duplex; |
| break; |
| } |
| cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_AUTONEG_ADVER, |
| reg_autoneg_adver.u16); |
| if (reg_status.s.capable_extended_status) |
| cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_CONTROL_1000, |
| reg_control_1000.u16); |
| reg_control.u16 = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_CONTROL); |
| reg_control.s.autoneg_enable = 1; |
| reg_control.s.restart_autoneg = 1; |
| cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16); |
| } else { |
| cvmx_mdio_phy_reg_control_t reg_control; |
| reg_control.u16 = |
| cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_CONTROL); |
| reg_control.s.autoneg_enable = 0; |
| reg_control.s.restart_autoneg = 1; |
| reg_control.s.duplex = link_info.s.full_duplex; |
| if (link_info.s.speed == 1000) { |
| reg_control.s.speed_msb = 1; |
| reg_control.s.speed_lsb = 0; |
| } else if (link_info.s.speed == 100) { |
| reg_control.s.speed_msb = 0; |
| reg_control.s.speed_lsb = 1; |
| } else if (link_info.s.speed == 10) { |
| reg_control.s.speed_msb = 0; |
| reg_control.s.speed_lsb = 0; |
| } |
| cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, |
| CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16); |
| } |
| return 0; |
| } |
| |
| /** |
| * This function is called by cvmx_helper_interface_probe() after it |
| * determines the number of ports Octeon can support on a specific |
| * interface. This function is the per board location to override |
| * this value. It is called with the number of ports Octeon might |
| * support and should return the number of actual ports on the |
| * board. |
| * |
| * This function must be modifed for every new Octeon board. |
| * Internally it uses switch statements based on the cvmx_sysinfo |
| * data to determine board types and revisions. It relys on the |
| * fact that every Octeon board receives a unique board type |
| * enumeration from the bootloader. |
| * |
| * @interface: Interface to probe |
| * @supported_ports: |
| * Number of ports Octeon supports. |
| * |
| * Returns Number of ports the actual board supports. Many times this will |
| * simple be "support_ports". |
| */ |
| int __cvmx_helper_board_interface_probe(int interface, int supported_ports) |
| { |
| switch (cvmx_sysinfo_get()->board_type) { |
| case CVMX_BOARD_TYPE_CN3005_EVB_HS5: |
| if (interface == 0) |
| return 2; |
| break; |
| case CVMX_BOARD_TYPE_BBGW_REF: |
| if (interface == 0) |
| return 2; |
| break; |
| case CVMX_BOARD_TYPE_NIC_XLE_4G: |
| if (interface == 0) |
| return 0; |
| break; |
| /* The 2nd interface on the EBH5600 is connected to the Marvel switch, |
| which we don't support. Disable ports connected to it */ |
| case CVMX_BOARD_TYPE_EBH5600: |
| if (interface == 1) |
| return 0; |
| break; |
| } |
| return supported_ports; |
| } |
| |
| /** |
| * Enable packet input/output from the hardware. This function is |
| * called after by cvmx_helper_packet_hardware_enable() to |
| * perform board specific initialization. For most boards |
| * nothing is needed. |
| * |
| * @interface: Interface to enable |
| * |
| * Returns Zero on success, negative on failure |
| */ |
| int __cvmx_helper_board_hardware_enable(int interface) |
| { |
| if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5) { |
| if (interface == 0) { |
| /* Different config for switch port */ |
| cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0); |
| cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0); |
| /* |
| * Boards with gigabit WAN ports need a |
| * different setting that is compatible with |
| * 100 Mbit settings |
| */ |
| cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), |
| 0xc); |
| cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), |
| 0xc); |
| } |
| } else if (cvmx_sysinfo_get()->board_type == |
| CVMX_BOARD_TYPE_CN3010_EVB_HS5) { |
| /* |
| * Broadcom PHYs require differnet ASX |
| * clocks. Unfortunately many boards don't define a |
| * new board Id and simply mangle the |
| * CN3010_EVB_HS5 |
| */ |
| if (interface == 0) { |
| /* |
| * Some boards use a hacked up bootloader that |
| * identifies them as CN3010_EVB_HS5 |
| * evaluation boards. This leads to all kinds |
| * of configuration problems. Detect one |
| * case, and print warning, while trying to do |
| * the right thing. |
| */ |
| int phy_addr = cvmx_helper_board_get_mii_address(0); |
| if (phy_addr != -1) { |
| int phy_identifier = |
| cvmx_mdio_read(phy_addr >> 8, |
| phy_addr & 0xff, 0x2); |
| /* Is it a Broadcom PHY? */ |
| if (phy_identifier == 0x0143) { |
| cvmx_dprintf("\n"); |
| cvmx_dprintf("ERROR:\n"); |
| cvmx_dprintf |
| ("ERROR: Board type is CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n"); |
| cvmx_dprintf |
| ("ERROR: The board type is mis-configured, and software malfunctions are likely.\n"); |
| cvmx_dprintf |
| ("ERROR: All boards require a unique board type to identify them.\n"); |
| cvmx_dprintf("ERROR:\n"); |
| cvmx_dprintf("\n"); |
| cvmx_wait(1000000000); |
| cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX |
| (0, interface), 5); |
| cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX |
| (0, interface), 5); |
| } |
| } |
| } |
| } |
| return 0; |
| } |
