| #!/bin/bash |
| # SPDX-License-Identifier: GPL-2.0 |
| |
| # This test is for checking IPv4 and IPv6 FIB behavior in response to |
| # different events. |
| |
| ret=0 |
| |
| VERBOSE=${VERBOSE:=0} |
| PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} |
| IP="ip -netns testns" |
| |
| log_test() |
| { |
| local rc=$1 |
| local expected=$2 |
| local msg="$3" |
| |
| if [ ${rc} -eq ${expected} ]; then |
| printf " TEST: %-60s [ OK ]\n" "${msg}" |
| else |
| ret=1 |
| printf " TEST: %-60s [FAIL]\n" "${msg}" |
| if [ "${PAUSE_ON_FAIL}" = "yes" ]; then |
| echo |
| echo "hit enter to continue, 'q' to quit" |
| read a |
| [ "$a" = "q" ] && exit 1 |
| fi |
| fi |
| } |
| |
| setup() |
| { |
| set -e |
| ip netns add testns |
| $IP link set dev lo up |
| |
| $IP link add dummy0 type dummy |
| $IP link set dev dummy0 up |
| $IP address add 198.51.100.1/24 dev dummy0 |
| $IP -6 address add 2001:db8:1::1/64 dev dummy0 |
| set +e |
| |
| } |
| |
| cleanup() |
| { |
| $IP link del dev dummy0 &> /dev/null |
| ip netns del testns |
| } |
| |
| get_linklocal() |
| { |
| local dev=$1 |
| local addr |
| |
| addr=$($IP -6 -br addr show dev ${dev} | \ |
| awk '{ |
| for (i = 3; i <= NF; ++i) { |
| if ($i ~ /^fe80/) |
| print $i |
| } |
| }' |
| ) |
| addr=${addr/\/*} |
| |
| [ -z "$addr" ] && return 1 |
| |
| echo $addr |
| |
| return 0 |
| } |
| |
| fib_unreg_unicast_test() |
| { |
| echo |
| echo "Single path route test" |
| |
| setup |
| |
| echo " Start point" |
| $IP route get fibmatch 198.51.100.2 &> /dev/null |
| log_test $? 0 "IPv4 fibmatch" |
| $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null |
| log_test $? 0 "IPv6 fibmatch" |
| |
| set -e |
| $IP link del dev dummy0 |
| set +e |
| |
| echo " Nexthop device deleted" |
| $IP route get fibmatch 198.51.100.2 &> /dev/null |
| log_test $? 2 "IPv4 fibmatch - no route" |
| $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null |
| log_test $? 2 "IPv6 fibmatch - no route" |
| |
| cleanup |
| } |
| |
| fib_unreg_multipath_test() |
| { |
| |
| echo |
| echo "Multipath route test" |
| |
| setup |
| |
| set -e |
| $IP link add dummy1 type dummy |
| $IP link set dev dummy1 up |
| $IP address add 192.0.2.1/24 dev dummy1 |
| $IP -6 address add 2001:db8:2::1/64 dev dummy1 |
| |
| $IP route add 203.0.113.0/24 \ |
| nexthop via 198.51.100.2 dev dummy0 \ |
| nexthop via 192.0.2.2 dev dummy1 |
| $IP -6 route add 2001:db8:3::/64 \ |
| nexthop via 2001:db8:1::2 dev dummy0 \ |
| nexthop via 2001:db8:2::2 dev dummy1 |
| set +e |
| |
| echo " Start point" |
| $IP route get fibmatch 203.0.113.1 &> /dev/null |
| log_test $? 0 "IPv4 fibmatch" |
| $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null |
| log_test $? 0 "IPv6 fibmatch" |
| |
| set -e |
| $IP link del dev dummy0 |
| set +e |
| |
| echo " One nexthop device deleted" |
| $IP route get fibmatch 203.0.113.1 &> /dev/null |
| log_test $? 2 "IPv4 - multipath route removed on delete" |
| |
| $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null |
| # In IPv6 we do not flush the entire multipath route. |
| log_test $? 0 "IPv6 - multipath down to single path" |
| |
| set -e |
| $IP link del dev dummy1 |
| set +e |
| |
| echo " Second nexthop device deleted" |
| $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null |
| log_test $? 2 "IPv6 - no route" |
| |
| cleanup |
| } |
| |
| fib_unreg_test() |
| { |
| fib_unreg_unicast_test |
| fib_unreg_multipath_test |
| } |
| |
| fib_down_unicast_test() |
| { |
| echo |
| echo "Single path, admin down" |
| |
| setup |
| |
| echo " Start point" |
| $IP route get fibmatch 198.51.100.2 &> /dev/null |
| log_test $? 0 "IPv4 fibmatch" |
| $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null |
| log_test $? 0 "IPv6 fibmatch" |
| |
| set -e |
| $IP link set dev dummy0 down |
| set +e |
| |
| echo " Route deleted on down" |
| $IP route get fibmatch 198.51.100.2 &> /dev/null |
| log_test $? 2 "IPv4 fibmatch" |
| $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null |
| log_test $? 2 "IPv6 fibmatch" |
| |
| cleanup |
| } |
| |
| fib_down_multipath_test_do() |
| { |
| local down_dev=$1 |
| local up_dev=$2 |
| |
| $IP route get fibmatch 203.0.113.1 \ |
| oif $down_dev &> /dev/null |
| log_test $? 2 "IPv4 fibmatch on down device" |
| $IP -6 route get fibmatch 2001:db8:3::1 \ |
| oif $down_dev &> /dev/null |
| log_test $? 2 "IPv6 fibmatch on down device" |
| |
| $IP route get fibmatch 203.0.113.1 \ |
| oif $up_dev &> /dev/null |
| log_test $? 0 "IPv4 fibmatch on up device" |
| $IP -6 route get fibmatch 2001:db8:3::1 \ |
| oif $up_dev &> /dev/null |
| log_test $? 0 "IPv6 fibmatch on up device" |
| |
| $IP route get fibmatch 203.0.113.1 | \ |
| grep $down_dev | grep -q "dead linkdown" |
| log_test $? 0 "IPv4 flags on down device" |
| $IP -6 route get fibmatch 2001:db8:3::1 | \ |
| grep $down_dev | grep -q "dead linkdown" |
| log_test $? 0 "IPv6 flags on down device" |
| |
| $IP route get fibmatch 203.0.113.1 | \ |
| grep $up_dev | grep -q "dead linkdown" |
| log_test $? 1 "IPv4 flags on up device" |
| $IP -6 route get fibmatch 2001:db8:3::1 | \ |
| grep $up_dev | grep -q "dead linkdown" |
| log_test $? 1 "IPv6 flags on up device" |
| } |
| |
| fib_down_multipath_test() |
| { |
| echo |
| echo "Admin down multipath" |
| |
| setup |
| |
| set -e |
| $IP link add dummy1 type dummy |
| $IP link set dev dummy1 up |
| |
| $IP address add 192.0.2.1/24 dev dummy1 |
| $IP -6 address add 2001:db8:2::1/64 dev dummy1 |
| |
| $IP route add 203.0.113.0/24 \ |
| nexthop via 198.51.100.2 dev dummy0 \ |
| nexthop via 192.0.2.2 dev dummy1 |
| $IP -6 route add 2001:db8:3::/64 \ |
| nexthop via 2001:db8:1::2 dev dummy0 \ |
| nexthop via 2001:db8:2::2 dev dummy1 |
| set +e |
| |
| echo " Verify start point" |
| $IP route get fibmatch 203.0.113.1 &> /dev/null |
| log_test $? 0 "IPv4 fibmatch" |
| |
| $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null |
| log_test $? 0 "IPv6 fibmatch" |
| |
| set -e |
| $IP link set dev dummy0 down |
| set +e |
| |
| echo " One device down, one up" |
| fib_down_multipath_test_do "dummy0" "dummy1" |
| |
| set -e |
| $IP link set dev dummy0 up |
| $IP link set dev dummy1 down |
| set +e |
| |
| echo " Other device down and up" |
| fib_down_multipath_test_do "dummy1" "dummy0" |
| |
| set -e |
| $IP link set dev dummy0 down |
| set +e |
| |
| echo " Both devices down" |
| $IP route get fibmatch 203.0.113.1 &> /dev/null |
| log_test $? 2 "IPv4 fibmatch" |
| $IP -6 route get fibmatch 2001:db8:3::1 &> /dev/null |
| log_test $? 2 "IPv6 fibmatch" |
| |
| $IP link del dev dummy1 |
| cleanup |
| } |
| |
| fib_down_test() |
| { |
| fib_down_unicast_test |
| fib_down_multipath_test |
| } |
| |
| # Local routes should not be affected when carrier changes. |
| fib_carrier_local_test() |
| { |
| echo |
| echo "Local carrier tests - single path" |
| |
| setup |
| |
| set -e |
| $IP link set dev dummy0 carrier on |
| set +e |
| |
| echo " Start point" |
| $IP route get fibmatch 198.51.100.1 &> /dev/null |
| log_test $? 0 "IPv4 fibmatch" |
| $IP -6 route get fibmatch 2001:db8:1::1 &> /dev/null |
| log_test $? 0 "IPv6 fibmatch" |
| |
| $IP route get fibmatch 198.51.100.1 | \ |
| grep -q "linkdown" |
| log_test $? 1 "IPv4 - no linkdown flag" |
| $IP -6 route get fibmatch 2001:db8:1::1 | \ |
| grep -q "linkdown" |
| log_test $? 1 "IPv6 - no linkdown flag" |
| |
| set -e |
| $IP link set dev dummy0 carrier off |
| sleep 1 |
| set +e |
| |
| echo " Carrier off on nexthop" |
| $IP route get fibmatch 198.51.100.1 &> /dev/null |
| log_test $? 0 "IPv4 fibmatch" |
| $IP -6 route get fibmatch 2001:db8:1::1 &> /dev/null |
| log_test $? 0 "IPv6 fibmatch" |
| |
| $IP route get fibmatch 198.51.100.1 | \ |
| grep -q "linkdown" |
| log_test $? 1 "IPv4 - linkdown flag set" |
| $IP -6 route get fibmatch 2001:db8:1::1 | \ |
| grep -q "linkdown" |
| log_test $? 1 "IPv6 - linkdown flag set" |
| |
| set -e |
| $IP address add 192.0.2.1/24 dev dummy0 |
| $IP -6 address add 2001:db8:2::1/64 dev dummy0 |
| set +e |
| |
| echo " Route to local address with carrier down" |
| $IP route get fibmatch 192.0.2.1 &> /dev/null |
| log_test $? 0 "IPv4 fibmatch" |
| $IP -6 route get fibmatch 2001:db8:2::1 &> /dev/null |
| log_test $? 0 "IPv6 fibmatch" |
| |
| $IP route get fibmatch 192.0.2.1 | \ |
| grep -q "linkdown" |
| log_test $? 1 "IPv4 linkdown flag set" |
| $IP -6 route get fibmatch 2001:db8:2::1 | \ |
| grep -q "linkdown" |
| log_test $? 1 "IPv6 linkdown flag set" |
| |
| cleanup |
| } |
| |
| fib_carrier_unicast_test() |
| { |
| ret=0 |
| |
| echo |
| echo "Single path route carrier test" |
| |
| setup |
| |
| set -e |
| $IP link set dev dummy0 carrier on |
| set +e |
| |
| echo " Start point" |
| $IP route get fibmatch 198.51.100.2 &> /dev/null |
| log_test $? 0 "IPv4 fibmatch" |
| $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null |
| log_test $? 0 "IPv6 fibmatch" |
| |
| $IP route get fibmatch 198.51.100.2 | \ |
| grep -q "linkdown" |
| log_test $? 1 "IPv4 no linkdown flag" |
| $IP -6 route get fibmatch 2001:db8:1::2 | \ |
| grep -q "linkdown" |
| log_test $? 1 "IPv6 no linkdown flag" |
| |
| set -e |
| $IP link set dev dummy0 carrier off |
| set +e |
| |
| echo " Carrier down" |
| $IP route get fibmatch 198.51.100.2 &> /dev/null |
| log_test $? 0 "IPv4 fibmatch" |
| $IP -6 route get fibmatch 2001:db8:1::2 &> /dev/null |
| log_test $? 0 "IPv6 fibmatch" |
| |
| $IP route get fibmatch 198.51.100.2 | \ |
| grep -q "linkdown" |
| log_test $? 0 "IPv4 linkdown flag set" |
| $IP -6 route get fibmatch 2001:db8:1::2 | \ |
| grep -q "linkdown" |
| log_test $? 0 "IPv6 linkdown flag set" |
| |
| set -e |
| $IP address add 192.0.2.1/24 dev dummy0 |
| $IP -6 address add 2001:db8:2::1/64 dev dummy0 |
| set +e |
| |
| echo " Second address added with carrier down" |
| $IP route get fibmatch 192.0.2.2 &> /dev/null |
| log_test $? 0 "IPv4 fibmatch" |
| $IP -6 route get fibmatch 2001:db8:2::2 &> /dev/null |
| log_test $? 0 "IPv6 fibmatch" |
| |
| $IP route get fibmatch 192.0.2.2 | \ |
| grep -q "linkdown" |
| log_test $? 0 "IPv4 linkdown flag set" |
| $IP -6 route get fibmatch 2001:db8:2::2 | \ |
| grep -q "linkdown" |
| log_test $? 0 "IPv6 linkdown flag set" |
| |
| cleanup |
| } |
| |
| fib_carrier_test() |
| { |
| fib_carrier_local_test |
| fib_carrier_unicast_test |
| } |
| |
| ################################################################################ |
| # Tests on nexthop spec |
| |
| # run 'ip route add' with given spec |
| add_rt() |
| { |
| local desc="$1" |
| local erc=$2 |
| local vrf=$3 |
| local pfx=$4 |
| local gw=$5 |
| local dev=$6 |
| local cmd out rc |
| |
| [ "$vrf" = "-" ] && vrf="default" |
| [ -n "$gw" ] && gw="via $gw" |
| [ -n "$dev" ] && dev="dev $dev" |
| |
| cmd="$IP route add vrf $vrf $pfx $gw $dev" |
| if [ "$VERBOSE" = "1" ]; then |
| printf "\n COMMAND: $cmd\n" |
| fi |
| |
| out=$(eval $cmd 2>&1) |
| rc=$? |
| if [ "$VERBOSE" = "1" -a -n "$out" ]; then |
| echo " $out" |
| fi |
| log_test $rc $erc "$desc" |
| } |
| |
| fib4_nexthop() |
| { |
| echo |
| echo "IPv4 nexthop tests" |
| |
| echo "<<< write me >>>" |
| } |
| |
| fib6_nexthop() |
| { |
| local lldummy=$(get_linklocal dummy0) |
| local llv1=$(get_linklocal dummy0) |
| |
| if [ -z "$lldummy" ]; then |
| echo "Failed to get linklocal address for dummy0" |
| return 1 |
| fi |
| if [ -z "$llv1" ]; then |
| echo "Failed to get linklocal address for veth1" |
| return 1 |
| fi |
| |
| echo |
| echo "IPv6 nexthop tests" |
| |
| add_rt "Directly connected nexthop, unicast address" 0 \ |
| - 2001:db8:101::/64 2001:db8:1::2 |
| add_rt "Directly connected nexthop, unicast address with device" 0 \ |
| - 2001:db8:102::/64 2001:db8:1::2 "dummy0" |
| add_rt "Gateway is linklocal address" 0 \ |
| - 2001:db8:103::1/64 $llv1 "veth0" |
| |
| # fails because LL address requires a device |
| add_rt "Gateway is linklocal address, no device" 2 \ |
| - 2001:db8:104::1/64 $llv1 |
| |
| # local address can not be a gateway |
| add_rt "Gateway can not be local unicast address" 2 \ |
| - 2001:db8:105::/64 2001:db8:1::1 |
| add_rt "Gateway can not be local unicast address, with device" 2 \ |
| - 2001:db8:106::/64 2001:db8:1::1 "dummy0" |
| add_rt "Gateway can not be a local linklocal address" 2 \ |
| - 2001:db8:107::1/64 $lldummy "dummy0" |
| |
| # VRF tests |
| add_rt "Gateway can be local address in a VRF" 0 \ |
| - 2001:db8:108::/64 2001:db8:51::2 |
| add_rt "Gateway can be local address in a VRF, with device" 0 \ |
| - 2001:db8:109::/64 2001:db8:51::2 "veth0" |
| add_rt "Gateway can be local linklocal address in a VRF" 0 \ |
| - 2001:db8:110::1/64 $llv1 "veth0" |
| |
| add_rt "Redirect to VRF lookup" 0 \ |
| - 2001:db8:111::/64 "" "red" |
| |
| add_rt "VRF route, gateway can be local address in default VRF" 0 \ |
| red 2001:db8:112::/64 2001:db8:51::1 |
| |
| # local address in same VRF fails |
| add_rt "VRF route, gateway can not be a local address" 2 \ |
| red 2001:db8:113::1/64 2001:db8:2::1 |
| add_rt "VRF route, gateway can not be a local addr with device" 2 \ |
| red 2001:db8:114::1/64 2001:db8:2::1 "dummy1" |
| } |
| |
| # Default VRF: |
| # dummy0 - 198.51.100.1/24 2001:db8:1::1/64 |
| # veth0 - 192.0.2.1/24 2001:db8:51::1/64 |
| # |
| # VRF red: |
| # dummy1 - 192.168.2.1/24 2001:db8:2::1/64 |
| # veth1 - 192.0.2.2/24 2001:db8:51::2/64 |
| # |
| # [ dummy0 veth0 ]--[ veth1 dummy1 ] |
| |
| fib_nexthop_test() |
| { |
| setup |
| |
| set -e |
| |
| $IP -4 rule add pref 32765 table local |
| $IP -4 rule del pref 0 |
| $IP -6 rule add pref 32765 table local |
| $IP -6 rule del pref 0 |
| |
| $IP link add red type vrf table 1 |
| $IP link set red up |
| $IP -4 route add vrf red unreachable default metric 4278198272 |
| $IP -6 route add vrf red unreachable default metric 4278198272 |
| |
| $IP link add veth0 type veth peer name veth1 |
| $IP link set dev veth0 up |
| $IP address add 192.0.2.1/24 dev veth0 |
| $IP -6 address add 2001:db8:51::1/64 dev veth0 |
| |
| $IP link set dev veth1 vrf red up |
| $IP address add 192.0.2.2/24 dev veth1 |
| $IP -6 address add 2001:db8:51::2/64 dev veth1 |
| |
| $IP link add dummy1 type dummy |
| $IP link set dev dummy1 vrf red up |
| $IP address add 192.168.2.1/24 dev dummy1 |
| $IP -6 address add 2001:db8:2::1/64 dev dummy1 |
| set +e |
| |
| sleep 1 |
| fib4_nexthop |
| fib6_nexthop |
| |
| ( |
| $IP link del dev dummy1 |
| $IP link del veth0 |
| $IP link del red |
| ) 2>/dev/null |
| cleanup |
| } |
| |
| ################################################################################ |
| # |
| |
| fib_test() |
| { |
| if [ -n "$TEST" ]; then |
| eval $TEST |
| else |
| fib_unreg_test |
| fib_down_test |
| fib_carrier_test |
| fib_nexthop_test |
| fi |
| } |
| |
| if [ "$(id -u)" -ne 0 ];then |
| echo "SKIP: Need root privileges" |
| exit 0 |
| fi |
| |
| if [ ! -x "$(command -v ip)" ]; then |
| echo "SKIP: Could not run test without ip tool" |
| exit 0 |
| fi |
| |
| ip route help 2>&1 | grep -q fibmatch |
| if [ $? -ne 0 ]; then |
| echo "SKIP: iproute2 too old, missing fibmatch" |
| exit 0 |
| fi |
| |
| # start clean |
| cleanup &> /dev/null |
| |
| fib_test |
| |
| exit $ret |