| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright (c) 2018, Intel Corporation. */ |
| |
| /* Intel(R) Ethernet Connection E800 Series Linux Driver */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <generated/utsrelease.h> |
| #include "ice.h" |
| #include "ice_base.h" |
| #include "ice_lib.h" |
| #include "ice_fltr.h" |
| #include "ice_dcb_lib.h" |
| #include "ice_dcb_nl.h" |
| #include "ice_devlink.h" |
| /* Including ice_trace.h with CREATE_TRACE_POINTS defined will generate the |
| * ice tracepoint functions. This must be done exactly once across the |
| * ice driver. |
| */ |
| #define CREATE_TRACE_POINTS |
| #include "ice_trace.h" |
| #include "ice_eswitch.h" |
| #include "ice_tc_lib.h" |
| #include "ice_vsi_vlan_ops.h" |
| |
| #define DRV_SUMMARY "Intel(R) Ethernet Connection E800 Series Linux Driver" |
| static const char ice_driver_string[] = DRV_SUMMARY; |
| static const char ice_copyright[] = "Copyright (c) 2018, Intel Corporation."; |
| |
| /* DDP Package file located in firmware search paths (e.g. /lib/firmware/) */ |
| #define ICE_DDP_PKG_PATH "intel/ice/ddp/" |
| #define ICE_DDP_PKG_FILE ICE_DDP_PKG_PATH "ice.pkg" |
| |
| MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); |
| MODULE_DESCRIPTION(DRV_SUMMARY); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_FIRMWARE(ICE_DDP_PKG_FILE); |
| |
| static int debug = -1; |
| module_param(debug, int, 0644); |
| #ifndef CONFIG_DYNAMIC_DEBUG |
| MODULE_PARM_DESC(debug, "netif level (0=none,...,16=all), hw debug_mask (0x8XXXXXXX)"); |
| #else |
| MODULE_PARM_DESC(debug, "netif level (0=none,...,16=all)"); |
| #endif /* !CONFIG_DYNAMIC_DEBUG */ |
| |
| static DEFINE_IDA(ice_aux_ida); |
| DEFINE_STATIC_KEY_FALSE(ice_xdp_locking_key); |
| EXPORT_SYMBOL(ice_xdp_locking_key); |
| |
| /** |
| * ice_hw_to_dev - Get device pointer from the hardware structure |
| * @hw: pointer to the device HW structure |
| * |
| * Used to access the device pointer from compilation units which can't easily |
| * include the definition of struct ice_pf without leading to circular header |
| * dependencies. |
| */ |
| struct device *ice_hw_to_dev(struct ice_hw *hw) |
| { |
| struct ice_pf *pf = container_of(hw, struct ice_pf, hw); |
| |
| return &pf->pdev->dev; |
| } |
| |
| static struct workqueue_struct *ice_wq; |
| static const struct net_device_ops ice_netdev_safe_mode_ops; |
| static const struct net_device_ops ice_netdev_ops; |
| |
| static void ice_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type); |
| |
| static void ice_vsi_release_all(struct ice_pf *pf); |
| |
| static int ice_rebuild_channels(struct ice_pf *pf); |
| static void ice_remove_q_channels(struct ice_vsi *vsi, bool rem_adv_fltr); |
| |
| static int |
| ice_indr_setup_tc_cb(struct net_device *netdev, struct Qdisc *sch, |
| void *cb_priv, enum tc_setup_type type, void *type_data, |
| void *data, |
| void (*cleanup)(struct flow_block_cb *block_cb)); |
| |
| bool netif_is_ice(struct net_device *dev) |
| { |
| return dev && (dev->netdev_ops == &ice_netdev_ops); |
| } |
| |
| /** |
| * ice_get_tx_pending - returns number of Tx descriptors not processed |
| * @ring: the ring of descriptors |
| */ |
| static u16 ice_get_tx_pending(struct ice_tx_ring *ring) |
| { |
| u16 head, tail; |
| |
| head = ring->next_to_clean; |
| tail = ring->next_to_use; |
| |
| if (head != tail) |
| return (head < tail) ? |
| tail - head : (tail + ring->count - head); |
| return 0; |
| } |
| |
| /** |
| * ice_check_for_hang_subtask - check for and recover hung queues |
| * @pf: pointer to PF struct |
| */ |
| static void ice_check_for_hang_subtask(struct ice_pf *pf) |
| { |
| struct ice_vsi *vsi = NULL; |
| struct ice_hw *hw; |
| unsigned int i; |
| int packets; |
| u32 v; |
| |
| ice_for_each_vsi(pf, v) |
| if (pf->vsi[v] && pf->vsi[v]->type == ICE_VSI_PF) { |
| vsi = pf->vsi[v]; |
| break; |
| } |
| |
| if (!vsi || test_bit(ICE_VSI_DOWN, vsi->state)) |
| return; |
| |
| if (!(vsi->netdev && netif_carrier_ok(vsi->netdev))) |
| return; |
| |
| hw = &vsi->back->hw; |
| |
| ice_for_each_txq(vsi, i) { |
| struct ice_tx_ring *tx_ring = vsi->tx_rings[i]; |
| struct ice_ring_stats *ring_stats; |
| |
| if (!tx_ring) |
| continue; |
| if (ice_ring_ch_enabled(tx_ring)) |
| continue; |
| |
| ring_stats = tx_ring->ring_stats; |
| if (!ring_stats) |
| continue; |
| |
| if (tx_ring->desc) { |
| /* If packet counter has not changed the queue is |
| * likely stalled, so force an interrupt for this |
| * queue. |
| * |
| * prev_pkt would be negative if there was no |
| * pending work. |
| */ |
| packets = ring_stats->stats.pkts & INT_MAX; |
| if (ring_stats->tx_stats.prev_pkt == packets) { |
| /* Trigger sw interrupt to revive the queue */ |
| ice_trigger_sw_intr(hw, tx_ring->q_vector); |
| continue; |
| } |
| |
| /* Memory barrier between read of packet count and call |
| * to ice_get_tx_pending() |
| */ |
| smp_rmb(); |
| ring_stats->tx_stats.prev_pkt = |
| ice_get_tx_pending(tx_ring) ? packets : -1; |
| } |
| } |
| } |
| |
| /** |
| * ice_init_mac_fltr - Set initial MAC filters |
| * @pf: board private structure |
| * |
| * Set initial set of MAC filters for PF VSI; configure filters for permanent |
| * address and broadcast address. If an error is encountered, netdevice will be |
| * unregistered. |
| */ |
| static int ice_init_mac_fltr(struct ice_pf *pf) |
| { |
| struct ice_vsi *vsi; |
| u8 *perm_addr; |
| |
| vsi = ice_get_main_vsi(pf); |
| if (!vsi) |
| return -EINVAL; |
| |
| perm_addr = vsi->port_info->mac.perm_addr; |
| return ice_fltr_add_mac_and_broadcast(vsi, perm_addr, ICE_FWD_TO_VSI); |
| } |
| |
| /** |
| * ice_add_mac_to_sync_list - creates list of MAC addresses to be synced |
| * @netdev: the net device on which the sync is happening |
| * @addr: MAC address to sync |
| * |
| * This is a callback function which is called by the in kernel device sync |
| * functions (like __dev_uc_sync, __dev_mc_sync, etc). This function only |
| * populates the tmp_sync_list, which is later used by ice_add_mac to add the |
| * MAC filters from the hardware. |
| */ |
| static int ice_add_mac_to_sync_list(struct net_device *netdev, const u8 *addr) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| |
| if (ice_fltr_add_mac_to_list(vsi, &vsi->tmp_sync_list, addr, |
| ICE_FWD_TO_VSI)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_add_mac_to_unsync_list - creates list of MAC addresses to be unsynced |
| * @netdev: the net device on which the unsync is happening |
| * @addr: MAC address to unsync |
| * |
| * This is a callback function which is called by the in kernel device unsync |
| * functions (like __dev_uc_unsync, __dev_mc_unsync, etc). This function only |
| * populates the tmp_unsync_list, which is later used by ice_remove_mac to |
| * delete the MAC filters from the hardware. |
| */ |
| static int ice_add_mac_to_unsync_list(struct net_device *netdev, const u8 *addr) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| |
| /* Under some circumstances, we might receive a request to delete our |
| * own device address from our uc list. Because we store the device |
| * address in the VSI's MAC filter list, we need to ignore such |
| * requests and not delete our device address from this list. |
| */ |
| if (ether_addr_equal(addr, netdev->dev_addr)) |
| return 0; |
| |
| if (ice_fltr_add_mac_to_list(vsi, &vsi->tmp_unsync_list, addr, |
| ICE_FWD_TO_VSI)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_vsi_fltr_changed - check if filter state changed |
| * @vsi: VSI to be checked |
| * |
| * returns true if filter state has changed, false otherwise. |
| */ |
| static bool ice_vsi_fltr_changed(struct ice_vsi *vsi) |
| { |
| return test_bit(ICE_VSI_UMAC_FLTR_CHANGED, vsi->state) || |
| test_bit(ICE_VSI_MMAC_FLTR_CHANGED, vsi->state); |
| } |
| |
| /** |
| * ice_set_promisc - Enable promiscuous mode for a given PF |
| * @vsi: the VSI being configured |
| * @promisc_m: mask of promiscuous config bits |
| * |
| */ |
| static int ice_set_promisc(struct ice_vsi *vsi, u8 promisc_m) |
| { |
| int status; |
| |
| if (vsi->type != ICE_VSI_PF) |
| return 0; |
| |
| if (ice_vsi_has_non_zero_vlans(vsi)) { |
| promisc_m |= (ICE_PROMISC_VLAN_RX | ICE_PROMISC_VLAN_TX); |
| status = ice_fltr_set_vlan_vsi_promisc(&vsi->back->hw, vsi, |
| promisc_m); |
| } else { |
| status = ice_fltr_set_vsi_promisc(&vsi->back->hw, vsi->idx, |
| promisc_m, 0); |
| } |
| if (status && status != -EEXIST) |
| return status; |
| |
| netdev_dbg(vsi->netdev, "set promisc filter bits for VSI %i: 0x%x\n", |
| vsi->vsi_num, promisc_m); |
| return 0; |
| } |
| |
| /** |
| * ice_clear_promisc - Disable promiscuous mode for a given PF |
| * @vsi: the VSI being configured |
| * @promisc_m: mask of promiscuous config bits |
| * |
| */ |
| static int ice_clear_promisc(struct ice_vsi *vsi, u8 promisc_m) |
| { |
| int status; |
| |
| if (vsi->type != ICE_VSI_PF) |
| return 0; |
| |
| if (ice_vsi_has_non_zero_vlans(vsi)) { |
| promisc_m |= (ICE_PROMISC_VLAN_RX | ICE_PROMISC_VLAN_TX); |
| status = ice_fltr_clear_vlan_vsi_promisc(&vsi->back->hw, vsi, |
| promisc_m); |
| } else { |
| status = ice_fltr_clear_vsi_promisc(&vsi->back->hw, vsi->idx, |
| promisc_m, 0); |
| } |
| |
| netdev_dbg(vsi->netdev, "clear promisc filter bits for VSI %i: 0x%x\n", |
| vsi->vsi_num, promisc_m); |
| return status; |
| } |
| |
| /** |
| * ice_vsi_sync_fltr - Update the VSI filter list to the HW |
| * @vsi: ptr to the VSI |
| * |
| * Push any outstanding VSI filter changes through the AdminQ. |
| */ |
| static int ice_vsi_sync_fltr(struct ice_vsi *vsi) |
| { |
| struct ice_vsi_vlan_ops *vlan_ops = ice_get_compat_vsi_vlan_ops(vsi); |
| struct device *dev = ice_pf_to_dev(vsi->back); |
| struct net_device *netdev = vsi->netdev; |
| bool promisc_forced_on = false; |
| struct ice_pf *pf = vsi->back; |
| struct ice_hw *hw = &pf->hw; |
| u32 changed_flags = 0; |
| int err; |
| |
| if (!vsi->netdev) |
| return -EINVAL; |
| |
| while (test_and_set_bit(ICE_CFG_BUSY, vsi->state)) |
| usleep_range(1000, 2000); |
| |
| changed_flags = vsi->current_netdev_flags ^ vsi->netdev->flags; |
| vsi->current_netdev_flags = vsi->netdev->flags; |
| |
| INIT_LIST_HEAD(&vsi->tmp_sync_list); |
| INIT_LIST_HEAD(&vsi->tmp_unsync_list); |
| |
| if (ice_vsi_fltr_changed(vsi)) { |
| clear_bit(ICE_VSI_UMAC_FLTR_CHANGED, vsi->state); |
| clear_bit(ICE_VSI_MMAC_FLTR_CHANGED, vsi->state); |
| |
| /* grab the netdev's addr_list_lock */ |
| netif_addr_lock_bh(netdev); |
| __dev_uc_sync(netdev, ice_add_mac_to_sync_list, |
| ice_add_mac_to_unsync_list); |
| __dev_mc_sync(netdev, ice_add_mac_to_sync_list, |
| ice_add_mac_to_unsync_list); |
| /* our temp lists are populated. release lock */ |
| netif_addr_unlock_bh(netdev); |
| } |
| |
| /* Remove MAC addresses in the unsync list */ |
| err = ice_fltr_remove_mac_list(vsi, &vsi->tmp_unsync_list); |
| ice_fltr_free_list(dev, &vsi->tmp_unsync_list); |
| if (err) { |
| netdev_err(netdev, "Failed to delete MAC filters\n"); |
| /* if we failed because of alloc failures, just bail */ |
| if (err == -ENOMEM) |
| goto out; |
| } |
| |
| /* Add MAC addresses in the sync list */ |
| err = ice_fltr_add_mac_list(vsi, &vsi->tmp_sync_list); |
| ice_fltr_free_list(dev, &vsi->tmp_sync_list); |
| /* If filter is added successfully or already exists, do not go into |
| * 'if' condition and report it as error. Instead continue processing |
| * rest of the function. |
| */ |
| if (err && err != -EEXIST) { |
| netdev_err(netdev, "Failed to add MAC filters\n"); |
| /* If there is no more space for new umac filters, VSI |
| * should go into promiscuous mode. There should be some |
| * space reserved for promiscuous filters. |
| */ |
| if (hw->adminq.sq_last_status == ICE_AQ_RC_ENOSPC && |
| !test_and_set_bit(ICE_FLTR_OVERFLOW_PROMISC, |
| vsi->state)) { |
| promisc_forced_on = true; |
| netdev_warn(netdev, "Reached MAC filter limit, forcing promisc mode on VSI %d\n", |
| vsi->vsi_num); |
| } else { |
| goto out; |
| } |
| } |
| err = 0; |
| /* check for changes in promiscuous modes */ |
| if (changed_flags & IFF_ALLMULTI) { |
| if (vsi->current_netdev_flags & IFF_ALLMULTI) { |
| err = ice_set_promisc(vsi, ICE_MCAST_PROMISC_BITS); |
| if (err) { |
| vsi->current_netdev_flags &= ~IFF_ALLMULTI; |
| goto out_promisc; |
| } |
| } else { |
| /* !(vsi->current_netdev_flags & IFF_ALLMULTI) */ |
| err = ice_clear_promisc(vsi, ICE_MCAST_PROMISC_BITS); |
| if (err) { |
| vsi->current_netdev_flags |= IFF_ALLMULTI; |
| goto out_promisc; |
| } |
| } |
| } |
| |
| if (((changed_flags & IFF_PROMISC) || promisc_forced_on) || |
| test_bit(ICE_VSI_PROMISC_CHANGED, vsi->state)) { |
| clear_bit(ICE_VSI_PROMISC_CHANGED, vsi->state); |
| if (vsi->current_netdev_flags & IFF_PROMISC) { |
| /* Apply Rx filter rule to get traffic from wire */ |
| if (!ice_is_dflt_vsi_in_use(vsi->port_info)) { |
| err = ice_set_dflt_vsi(vsi); |
| if (err && err != -EEXIST) { |
| netdev_err(netdev, "Error %d setting default VSI %i Rx rule\n", |
| err, vsi->vsi_num); |
| vsi->current_netdev_flags &= |
| ~IFF_PROMISC; |
| goto out_promisc; |
| } |
| err = 0; |
| vlan_ops->dis_rx_filtering(vsi); |
| |
| /* promiscuous mode implies allmulticast so |
| * that VSIs that are in promiscuous mode are |
| * subscribed to multicast packets coming to |
| * the port |
| */ |
| err = ice_set_promisc(vsi, |
| ICE_MCAST_PROMISC_BITS); |
| if (err) |
| goto out_promisc; |
| } |
| } else { |
| /* Clear Rx filter to remove traffic from wire */ |
| if (ice_is_vsi_dflt_vsi(vsi)) { |
| err = ice_clear_dflt_vsi(vsi); |
| if (err) { |
| netdev_err(netdev, "Error %d clearing default VSI %i Rx rule\n", |
| err, vsi->vsi_num); |
| vsi->current_netdev_flags |= |
| IFF_PROMISC; |
| goto out_promisc; |
| } |
| if (vsi->netdev->features & |
| NETIF_F_HW_VLAN_CTAG_FILTER) |
| vlan_ops->ena_rx_filtering(vsi); |
| } |
| |
| /* disable allmulti here, but only if allmulti is not |
| * still enabled for the netdev |
| */ |
| if (!(vsi->current_netdev_flags & IFF_ALLMULTI)) { |
| err = ice_clear_promisc(vsi, |
| ICE_MCAST_PROMISC_BITS); |
| if (err) { |
| netdev_err(netdev, "Error %d clearing multicast promiscuous on VSI %i\n", |
| err, vsi->vsi_num); |
| } |
| } |
| } |
| } |
| goto exit; |
| |
| out_promisc: |
| set_bit(ICE_VSI_PROMISC_CHANGED, vsi->state); |
| goto exit; |
| out: |
| /* if something went wrong then set the changed flag so we try again */ |
| set_bit(ICE_VSI_UMAC_FLTR_CHANGED, vsi->state); |
| set_bit(ICE_VSI_MMAC_FLTR_CHANGED, vsi->state); |
| exit: |
| clear_bit(ICE_CFG_BUSY, vsi->state); |
| return err; |
| } |
| |
| /** |
| * ice_sync_fltr_subtask - Sync the VSI filter list with HW |
| * @pf: board private structure |
| */ |
| static void ice_sync_fltr_subtask(struct ice_pf *pf) |
| { |
| int v; |
| |
| if (!pf || !(test_bit(ICE_FLAG_FLTR_SYNC, pf->flags))) |
| return; |
| |
| clear_bit(ICE_FLAG_FLTR_SYNC, pf->flags); |
| |
| ice_for_each_vsi(pf, v) |
| if (pf->vsi[v] && ice_vsi_fltr_changed(pf->vsi[v]) && |
| ice_vsi_sync_fltr(pf->vsi[v])) { |
| /* come back and try again later */ |
| set_bit(ICE_FLAG_FLTR_SYNC, pf->flags); |
| break; |
| } |
| } |
| |
| /** |
| * ice_pf_dis_all_vsi - Pause all VSIs on a PF |
| * @pf: the PF |
| * @locked: is the rtnl_lock already held |
| */ |
| static void ice_pf_dis_all_vsi(struct ice_pf *pf, bool locked) |
| { |
| int node; |
| int v; |
| |
| ice_for_each_vsi(pf, v) |
| if (pf->vsi[v]) |
| ice_dis_vsi(pf->vsi[v], locked); |
| |
| for (node = 0; node < ICE_MAX_PF_AGG_NODES; node++) |
| pf->pf_agg_node[node].num_vsis = 0; |
| |
| for (node = 0; node < ICE_MAX_VF_AGG_NODES; node++) |
| pf->vf_agg_node[node].num_vsis = 0; |
| } |
| |
| /** |
| * ice_clear_sw_switch_recipes - clear switch recipes |
| * @pf: board private structure |
| * |
| * Mark switch recipes as not created in sw structures. There are cases where |
| * rules (especially advanced rules) need to be restored, either re-read from |
| * hardware or added again. For example after the reset. 'recp_created' flag |
| * prevents from doing that and need to be cleared upfront. |
| */ |
| static void ice_clear_sw_switch_recipes(struct ice_pf *pf) |
| { |
| struct ice_sw_recipe *recp; |
| u8 i; |
| |
| recp = pf->hw.switch_info->recp_list; |
| for (i = 0; i < ICE_MAX_NUM_RECIPES; i++) |
| recp[i].recp_created = false; |
| } |
| |
| /** |
| * ice_prepare_for_reset - prep for reset |
| * @pf: board private structure |
| * @reset_type: reset type requested |
| * |
| * Inform or close all dependent features in prep for reset. |
| */ |
| static void |
| ice_prepare_for_reset(struct ice_pf *pf, enum ice_reset_req reset_type) |
| { |
| struct ice_hw *hw = &pf->hw; |
| struct ice_vsi *vsi; |
| struct ice_vf *vf; |
| unsigned int bkt; |
| |
| dev_dbg(ice_pf_to_dev(pf), "reset_type=%d\n", reset_type); |
| |
| /* already prepared for reset */ |
| if (test_bit(ICE_PREPARED_FOR_RESET, pf->state)) |
| return; |
| |
| ice_unplug_aux_dev(pf); |
| |
| /* Notify VFs of impending reset */ |
| if (ice_check_sq_alive(hw, &hw->mailboxq)) |
| ice_vc_notify_reset(pf); |
| |
| /* Disable VFs until reset is completed */ |
| mutex_lock(&pf->vfs.table_lock); |
| ice_for_each_vf(pf, bkt, vf) |
| ice_set_vf_state_qs_dis(vf); |
| mutex_unlock(&pf->vfs.table_lock); |
| |
| if (ice_is_eswitch_mode_switchdev(pf)) { |
| if (reset_type != ICE_RESET_PFR) |
| ice_clear_sw_switch_recipes(pf); |
| } |
| |
| /* release ADQ specific HW and SW resources */ |
| vsi = ice_get_main_vsi(pf); |
| if (!vsi) |
| goto skip; |
| |
| /* to be on safe side, reset orig_rss_size so that normal flow |
| * of deciding rss_size can take precedence |
| */ |
| vsi->orig_rss_size = 0; |
| |
| if (test_bit(ICE_FLAG_TC_MQPRIO, pf->flags)) { |
| if (reset_type == ICE_RESET_PFR) { |
| vsi->old_ena_tc = vsi->all_enatc; |
| vsi->old_numtc = vsi->all_numtc; |
| } else { |
| ice_remove_q_channels(vsi, true); |
| |
| /* for other reset type, do not support channel rebuild |
| * hence reset needed info |
| */ |
| vsi->old_ena_tc = 0; |
| vsi->all_enatc = 0; |
| vsi->old_numtc = 0; |
| vsi->all_numtc = 0; |
| vsi->req_txq = 0; |
| vsi->req_rxq = 0; |
| clear_bit(ICE_FLAG_TC_MQPRIO, pf->flags); |
| memset(&vsi->mqprio_qopt, 0, sizeof(vsi->mqprio_qopt)); |
| } |
| } |
| skip: |
| |
| /* clear SW filtering DB */ |
| ice_clear_hw_tbls(hw); |
| /* disable the VSIs and their queues that are not already DOWN */ |
| ice_pf_dis_all_vsi(pf, false); |
| |
| if (test_bit(ICE_FLAG_PTP_SUPPORTED, pf->flags)) |
| ice_ptp_prepare_for_reset(pf); |
| |
| if (ice_is_feature_supported(pf, ICE_F_GNSS)) |
| ice_gnss_exit(pf); |
| |
| if (hw->port_info) |
| ice_sched_clear_port(hw->port_info); |
| |
| ice_shutdown_all_ctrlq(hw); |
| |
| set_bit(ICE_PREPARED_FOR_RESET, pf->state); |
| } |
| |
| /** |
| * ice_do_reset - Initiate one of many types of resets |
| * @pf: board private structure |
| * @reset_type: reset type requested before this function was called. |
| */ |
| static void ice_do_reset(struct ice_pf *pf, enum ice_reset_req reset_type) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| struct ice_hw *hw = &pf->hw; |
| |
| dev_dbg(dev, "reset_type 0x%x requested\n", reset_type); |
| |
| ice_prepare_for_reset(pf, reset_type); |
| |
| /* trigger the reset */ |
| if (ice_reset(hw, reset_type)) { |
| dev_err(dev, "reset %d failed\n", reset_type); |
| set_bit(ICE_RESET_FAILED, pf->state); |
| clear_bit(ICE_RESET_OICR_RECV, pf->state); |
| clear_bit(ICE_PREPARED_FOR_RESET, pf->state); |
| clear_bit(ICE_PFR_REQ, pf->state); |
| clear_bit(ICE_CORER_REQ, pf->state); |
| clear_bit(ICE_GLOBR_REQ, pf->state); |
| wake_up(&pf->reset_wait_queue); |
| return; |
| } |
| |
| /* PFR is a bit of a special case because it doesn't result in an OICR |
| * interrupt. So for PFR, rebuild after the reset and clear the reset- |
| * associated state bits. |
| */ |
| if (reset_type == ICE_RESET_PFR) { |
| pf->pfr_count++; |
| ice_rebuild(pf, reset_type); |
| clear_bit(ICE_PREPARED_FOR_RESET, pf->state); |
| clear_bit(ICE_PFR_REQ, pf->state); |
| wake_up(&pf->reset_wait_queue); |
| ice_reset_all_vfs(pf); |
| } |
| } |
| |
| /** |
| * ice_reset_subtask - Set up for resetting the device and driver |
| * @pf: board private structure |
| */ |
| static void ice_reset_subtask(struct ice_pf *pf) |
| { |
| enum ice_reset_req reset_type = ICE_RESET_INVAL; |
| |
| /* When a CORER/GLOBR/EMPR is about to happen, the hardware triggers an |
| * OICR interrupt. The OICR handler (ice_misc_intr) determines what type |
| * of reset is pending and sets bits in pf->state indicating the reset |
| * type and ICE_RESET_OICR_RECV. So, if the latter bit is set |
| * prepare for pending reset if not already (for PF software-initiated |
| * global resets the software should already be prepared for it as |
| * indicated by ICE_PREPARED_FOR_RESET; for global resets initiated |
| * by firmware or software on other PFs, that bit is not set so prepare |
| * for the reset now), poll for reset done, rebuild and return. |
| */ |
| if (test_bit(ICE_RESET_OICR_RECV, pf->state)) { |
| /* Perform the largest reset requested */ |
| if (test_and_clear_bit(ICE_CORER_RECV, pf->state)) |
| reset_type = ICE_RESET_CORER; |
| if (test_and_clear_bit(ICE_GLOBR_RECV, pf->state)) |
| reset_type = ICE_RESET_GLOBR; |
| if (test_and_clear_bit(ICE_EMPR_RECV, pf->state)) |
| reset_type = ICE_RESET_EMPR; |
| /* return if no valid reset type requested */ |
| if (reset_type == ICE_RESET_INVAL) |
| return; |
| ice_prepare_for_reset(pf, reset_type); |
| |
| /* make sure we are ready to rebuild */ |
| if (ice_check_reset(&pf->hw)) { |
| set_bit(ICE_RESET_FAILED, pf->state); |
| } else { |
| /* done with reset. start rebuild */ |
| pf->hw.reset_ongoing = false; |
| ice_rebuild(pf, reset_type); |
| /* clear bit to resume normal operations, but |
| * ICE_NEEDS_RESTART bit is set in case rebuild failed |
| */ |
| clear_bit(ICE_RESET_OICR_RECV, pf->state); |
| clear_bit(ICE_PREPARED_FOR_RESET, pf->state); |
| clear_bit(ICE_PFR_REQ, pf->state); |
| clear_bit(ICE_CORER_REQ, pf->state); |
| clear_bit(ICE_GLOBR_REQ, pf->state); |
| wake_up(&pf->reset_wait_queue); |
| ice_reset_all_vfs(pf); |
| } |
| |
| return; |
| } |
| |
| /* No pending resets to finish processing. Check for new resets */ |
| if (test_bit(ICE_PFR_REQ, pf->state)) |
| reset_type = ICE_RESET_PFR; |
| if (test_bit(ICE_CORER_REQ, pf->state)) |
| reset_type = ICE_RESET_CORER; |
| if (test_bit(ICE_GLOBR_REQ, pf->state)) |
| reset_type = ICE_RESET_GLOBR; |
| /* If no valid reset type requested just return */ |
| if (reset_type == ICE_RESET_INVAL) |
| return; |
| |
| /* reset if not already down or busy */ |
| if (!test_bit(ICE_DOWN, pf->state) && |
| !test_bit(ICE_CFG_BUSY, pf->state)) { |
| ice_do_reset(pf, reset_type); |
| } |
| } |
| |
| /** |
| * ice_print_topo_conflict - print topology conflict message |
| * @vsi: the VSI whose topology status is being checked |
| */ |
| static void ice_print_topo_conflict(struct ice_vsi *vsi) |
| { |
| switch (vsi->port_info->phy.link_info.topo_media_conflict) { |
| case ICE_AQ_LINK_TOPO_CONFLICT: |
| case ICE_AQ_LINK_MEDIA_CONFLICT: |
| case ICE_AQ_LINK_TOPO_UNREACH_PRT: |
| case ICE_AQ_LINK_TOPO_UNDRUTIL_PRT: |
| case ICE_AQ_LINK_TOPO_UNDRUTIL_MEDIA: |
| netdev_info(vsi->netdev, "Potential misconfiguration of the Ethernet port detected. If it was not intended, please use the Intel (R) Ethernet Port Configuration Tool to address the issue.\n"); |
| break; |
| case ICE_AQ_LINK_TOPO_UNSUPP_MEDIA: |
| if (test_bit(ICE_FLAG_LINK_LENIENT_MODE_ENA, vsi->back->flags)) |
| netdev_warn(vsi->netdev, "An unsupported module type was detected. Refer to the Intel(R) Ethernet Adapters and Devices User Guide for a list of supported modules\n"); |
| else |
| netdev_err(vsi->netdev, "Rx/Tx is disabled on this device because an unsupported module type was detected. Refer to the Intel(R) Ethernet Adapters and Devices User Guide for a list of supported modules.\n"); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /** |
| * ice_print_link_msg - print link up or down message |
| * @vsi: the VSI whose link status is being queried |
| * @isup: boolean for if the link is now up or down |
| */ |
| void ice_print_link_msg(struct ice_vsi *vsi, bool isup) |
| { |
| struct ice_aqc_get_phy_caps_data *caps; |
| const char *an_advertised; |
| const char *fec_req; |
| const char *speed; |
| const char *fec; |
| const char *fc; |
| const char *an; |
| int status; |
| |
| if (!vsi) |
| return; |
| |
| if (vsi->current_isup == isup) |
| return; |
| |
| vsi->current_isup = isup; |
| |
| if (!isup) { |
| netdev_info(vsi->netdev, "NIC Link is Down\n"); |
| return; |
| } |
| |
| switch (vsi->port_info->phy.link_info.link_speed) { |
| case ICE_AQ_LINK_SPEED_100GB: |
| speed = "100 G"; |
| break; |
| case ICE_AQ_LINK_SPEED_50GB: |
| speed = "50 G"; |
| break; |
| case ICE_AQ_LINK_SPEED_40GB: |
| speed = "40 G"; |
| break; |
| case ICE_AQ_LINK_SPEED_25GB: |
| speed = "25 G"; |
| break; |
| case ICE_AQ_LINK_SPEED_20GB: |
| speed = "20 G"; |
| break; |
| case ICE_AQ_LINK_SPEED_10GB: |
| speed = "10 G"; |
| break; |
| case ICE_AQ_LINK_SPEED_5GB: |
| speed = "5 G"; |
| break; |
| case ICE_AQ_LINK_SPEED_2500MB: |
| speed = "2.5 G"; |
| break; |
| case ICE_AQ_LINK_SPEED_1000MB: |
| speed = "1 G"; |
| break; |
| case ICE_AQ_LINK_SPEED_100MB: |
| speed = "100 M"; |
| break; |
| default: |
| speed = "Unknown "; |
| break; |
| } |
| |
| switch (vsi->port_info->fc.current_mode) { |
| case ICE_FC_FULL: |
| fc = "Rx/Tx"; |
| break; |
| case ICE_FC_TX_PAUSE: |
| fc = "Tx"; |
| break; |
| case ICE_FC_RX_PAUSE: |
| fc = "Rx"; |
| break; |
| case ICE_FC_NONE: |
| fc = "None"; |
| break; |
| default: |
| fc = "Unknown"; |
| break; |
| } |
| |
| /* Get FEC mode based on negotiated link info */ |
| switch (vsi->port_info->phy.link_info.fec_info) { |
| case ICE_AQ_LINK_25G_RS_528_FEC_EN: |
| case ICE_AQ_LINK_25G_RS_544_FEC_EN: |
| fec = "RS-FEC"; |
| break; |
| case ICE_AQ_LINK_25G_KR_FEC_EN: |
| fec = "FC-FEC/BASE-R"; |
| break; |
| default: |
| fec = "NONE"; |
| break; |
| } |
| |
| /* check if autoneg completed, might be false due to not supported */ |
| if (vsi->port_info->phy.link_info.an_info & ICE_AQ_AN_COMPLETED) |
| an = "True"; |
| else |
| an = "False"; |
| |
| /* Get FEC mode requested based on PHY caps last SW configuration */ |
| caps = kzalloc(sizeof(*caps), GFP_KERNEL); |
| if (!caps) { |
| fec_req = "Unknown"; |
| an_advertised = "Unknown"; |
| goto done; |
| } |
| |
| status = ice_aq_get_phy_caps(vsi->port_info, false, |
| ICE_AQC_REPORT_ACTIVE_CFG, caps, NULL); |
| if (status) |
| netdev_info(vsi->netdev, "Get phy capability failed.\n"); |
| |
| an_advertised = ice_is_phy_caps_an_enabled(caps) ? "On" : "Off"; |
| |
| if (caps->link_fec_options & ICE_AQC_PHY_FEC_25G_RS_528_REQ || |
| caps->link_fec_options & ICE_AQC_PHY_FEC_25G_RS_544_REQ) |
| fec_req = "RS-FEC"; |
| else if (caps->link_fec_options & ICE_AQC_PHY_FEC_10G_KR_40G_KR4_REQ || |
| caps->link_fec_options & ICE_AQC_PHY_FEC_25G_KR_REQ) |
| fec_req = "FC-FEC/BASE-R"; |
| else |
| fec_req = "NONE"; |
| |
| kfree(caps); |
| |
| done: |
| netdev_info(vsi->netdev, "NIC Link is up %sbps Full Duplex, Requested FEC: %s, Negotiated FEC: %s, Autoneg Advertised: %s, Autoneg Negotiated: %s, Flow Control: %s\n", |
| speed, fec_req, fec, an_advertised, an, fc); |
| ice_print_topo_conflict(vsi); |
| } |
| |
| /** |
| * ice_vsi_link_event - update the VSI's netdev |
| * @vsi: the VSI on which the link event occurred |
| * @link_up: whether or not the VSI needs to be set up or down |
| */ |
| static void ice_vsi_link_event(struct ice_vsi *vsi, bool link_up) |
| { |
| if (!vsi) |
| return; |
| |
| if (test_bit(ICE_VSI_DOWN, vsi->state) || !vsi->netdev) |
| return; |
| |
| if (vsi->type == ICE_VSI_PF) { |
| if (link_up == netif_carrier_ok(vsi->netdev)) |
| return; |
| |
| if (link_up) { |
| netif_carrier_on(vsi->netdev); |
| netif_tx_wake_all_queues(vsi->netdev); |
| } else { |
| netif_carrier_off(vsi->netdev); |
| netif_tx_stop_all_queues(vsi->netdev); |
| } |
| } |
| } |
| |
| /** |
| * ice_set_dflt_mib - send a default config MIB to the FW |
| * @pf: private PF struct |
| * |
| * This function sends a default configuration MIB to the FW. |
| * |
| * If this function errors out at any point, the driver is still able to |
| * function. The main impact is that LFC may not operate as expected. |
| * Therefore an error state in this function should be treated with a DBG |
| * message and continue on with driver rebuild/reenable. |
| */ |
| static void ice_set_dflt_mib(struct ice_pf *pf) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| u8 mib_type, *buf, *lldpmib = NULL; |
| u16 len, typelen, offset = 0; |
| struct ice_lldp_org_tlv *tlv; |
| struct ice_hw *hw = &pf->hw; |
| u32 ouisubtype; |
| |
| mib_type = SET_LOCAL_MIB_TYPE_LOCAL_MIB; |
| lldpmib = kzalloc(ICE_LLDPDU_SIZE, GFP_KERNEL); |
| if (!lldpmib) { |
| dev_dbg(dev, "%s Failed to allocate MIB memory\n", |
| __func__); |
| return; |
| } |
| |
| /* Add ETS CFG TLV */ |
| tlv = (struct ice_lldp_org_tlv *)lldpmib; |
| typelen = ((ICE_TLV_TYPE_ORG << ICE_LLDP_TLV_TYPE_S) | |
| ICE_IEEE_ETS_TLV_LEN); |
| tlv->typelen = htons(typelen); |
| ouisubtype = ((ICE_IEEE_8021QAZ_OUI << ICE_LLDP_TLV_OUI_S) | |
| ICE_IEEE_SUBTYPE_ETS_CFG); |
| tlv->ouisubtype = htonl(ouisubtype); |
| |
| buf = tlv->tlvinfo; |
| buf[0] = 0; |
| |
| /* ETS CFG all UPs map to TC 0. Next 4 (1 - 4) Octets = 0. |
| * Octets 5 - 12 are BW values, set octet 5 to 100% BW. |
| * Octets 13 - 20 are TSA values - leave as zeros |
| */ |
| buf[5] = 0x64; |
| len = (typelen & ICE_LLDP_TLV_LEN_M) >> ICE_LLDP_TLV_LEN_S; |
| offset += len + 2; |
| tlv = (struct ice_lldp_org_tlv *) |
| ((char *)tlv + sizeof(tlv->typelen) + len); |
| |
| /* Add ETS REC TLV */ |
| buf = tlv->tlvinfo; |
| tlv->typelen = htons(typelen); |
| |
| ouisubtype = ((ICE_IEEE_8021QAZ_OUI << ICE_LLDP_TLV_OUI_S) | |
| ICE_IEEE_SUBTYPE_ETS_REC); |
| tlv->ouisubtype = htonl(ouisubtype); |
| |
| /* First octet of buf is reserved |
| * Octets 1 - 4 map UP to TC - all UPs map to zero |
| * Octets 5 - 12 are BW values - set TC 0 to 100%. |
| * Octets 13 - 20 are TSA value - leave as zeros |
| */ |
| buf[5] = 0x64; |
| offset += len + 2; |
| tlv = (struct ice_lldp_org_tlv *) |
| ((char *)tlv + sizeof(tlv->typelen) + len); |
| |
| /* Add PFC CFG TLV */ |
| typelen = ((ICE_TLV_TYPE_ORG << ICE_LLDP_TLV_TYPE_S) | |
| ICE_IEEE_PFC_TLV_LEN); |
| tlv->typelen = htons(typelen); |
| |
| ouisubtype = ((ICE_IEEE_8021QAZ_OUI << ICE_LLDP_TLV_OUI_S) | |
| ICE_IEEE_SUBTYPE_PFC_CFG); |
| tlv->ouisubtype = htonl(ouisubtype); |
| |
| /* Octet 1 left as all zeros - PFC disabled */ |
| buf[0] = 0x08; |
| len = (typelen & ICE_LLDP_TLV_LEN_M) >> ICE_LLDP_TLV_LEN_S; |
| offset += len + 2; |
| |
| if (ice_aq_set_lldp_mib(hw, mib_type, (void *)lldpmib, offset, NULL)) |
| dev_dbg(dev, "%s Failed to set default LLDP MIB\n", __func__); |
| |
| kfree(lldpmib); |
| } |
| |
| /** |
| * ice_check_phy_fw_load - check if PHY FW load failed |
| * @pf: pointer to PF struct |
| * @link_cfg_err: bitmap from the link info structure |
| * |
| * check if external PHY FW load failed and print an error message if it did |
| */ |
| static void ice_check_phy_fw_load(struct ice_pf *pf, u8 link_cfg_err) |
| { |
| if (!(link_cfg_err & ICE_AQ_LINK_EXTERNAL_PHY_LOAD_FAILURE)) { |
| clear_bit(ICE_FLAG_PHY_FW_LOAD_FAILED, pf->flags); |
| return; |
| } |
| |
| if (test_bit(ICE_FLAG_PHY_FW_LOAD_FAILED, pf->flags)) |
| return; |
| |
| if (link_cfg_err & ICE_AQ_LINK_EXTERNAL_PHY_LOAD_FAILURE) { |
| dev_err(ice_pf_to_dev(pf), "Device failed to load the FW for the external PHY. Please download and install the latest NVM for your device and try again\n"); |
| set_bit(ICE_FLAG_PHY_FW_LOAD_FAILED, pf->flags); |
| } |
| } |
| |
| /** |
| * ice_check_module_power |
| * @pf: pointer to PF struct |
| * @link_cfg_err: bitmap from the link info structure |
| * |
| * check module power level returned by a previous call to aq_get_link_info |
| * and print error messages if module power level is not supported |
| */ |
| static void ice_check_module_power(struct ice_pf *pf, u8 link_cfg_err) |
| { |
| /* if module power level is supported, clear the flag */ |
| if (!(link_cfg_err & (ICE_AQ_LINK_INVAL_MAX_POWER_LIMIT | |
| ICE_AQ_LINK_MODULE_POWER_UNSUPPORTED))) { |
| clear_bit(ICE_FLAG_MOD_POWER_UNSUPPORTED, pf->flags); |
| return; |
| } |
| |
| /* if ICE_FLAG_MOD_POWER_UNSUPPORTED was previously set and the |
| * above block didn't clear this bit, there's nothing to do |
| */ |
| if (test_bit(ICE_FLAG_MOD_POWER_UNSUPPORTED, pf->flags)) |
| return; |
| |
| if (link_cfg_err & ICE_AQ_LINK_INVAL_MAX_POWER_LIMIT) { |
| dev_err(ice_pf_to_dev(pf), "The installed module is incompatible with the device's NVM image. Cannot start link\n"); |
| set_bit(ICE_FLAG_MOD_POWER_UNSUPPORTED, pf->flags); |
| } else if (link_cfg_err & ICE_AQ_LINK_MODULE_POWER_UNSUPPORTED) { |
| dev_err(ice_pf_to_dev(pf), "The module's power requirements exceed the device's power supply. Cannot start link\n"); |
| set_bit(ICE_FLAG_MOD_POWER_UNSUPPORTED, pf->flags); |
| } |
| } |
| |
| /** |
| * ice_check_link_cfg_err - check if link configuration failed |
| * @pf: pointer to the PF struct |
| * @link_cfg_err: bitmap from the link info structure |
| * |
| * print if any link configuration failure happens due to the value in the |
| * link_cfg_err parameter in the link info structure |
| */ |
| static void ice_check_link_cfg_err(struct ice_pf *pf, u8 link_cfg_err) |
| { |
| ice_check_module_power(pf, link_cfg_err); |
| ice_check_phy_fw_load(pf, link_cfg_err); |
| } |
| |
| /** |
| * ice_link_event - process the link event |
| * @pf: PF that the link event is associated with |
| * @pi: port_info for the port that the link event is associated with |
| * @link_up: true if the physical link is up and false if it is down |
| * @link_speed: current link speed received from the link event |
| * |
| * Returns 0 on success and negative on failure |
| */ |
| static int |
| ice_link_event(struct ice_pf *pf, struct ice_port_info *pi, bool link_up, |
| u16 link_speed) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| struct ice_phy_info *phy_info; |
| struct ice_vsi *vsi; |
| u16 old_link_speed; |
| bool old_link; |
| int status; |
| |
| phy_info = &pi->phy; |
| phy_info->link_info_old = phy_info->link_info; |
| |
| old_link = !!(phy_info->link_info_old.link_info & ICE_AQ_LINK_UP); |
| old_link_speed = phy_info->link_info_old.link_speed; |
| |
| /* update the link info structures and re-enable link events, |
| * don't bail on failure due to other book keeping needed |
| */ |
| status = ice_update_link_info(pi); |
| if (status) |
| dev_dbg(dev, "Failed to update link status on port %d, err %d aq_err %s\n", |
| pi->lport, status, |
| ice_aq_str(pi->hw->adminq.sq_last_status)); |
| |
| ice_check_link_cfg_err(pf, pi->phy.link_info.link_cfg_err); |
| |
| /* Check if the link state is up after updating link info, and treat |
| * this event as an UP event since the link is actually UP now. |
| */ |
| if (phy_info->link_info.link_info & ICE_AQ_LINK_UP) |
| link_up = true; |
| |
| vsi = ice_get_main_vsi(pf); |
| if (!vsi || !vsi->port_info) |
| return -EINVAL; |
| |
| /* turn off PHY if media was removed */ |
| if (!test_bit(ICE_FLAG_NO_MEDIA, pf->flags) && |
| !(pi->phy.link_info.link_info & ICE_AQ_MEDIA_AVAILABLE)) { |
| set_bit(ICE_FLAG_NO_MEDIA, pf->flags); |
| ice_set_link(vsi, false); |
| } |
| |
| /* if the old link up/down and speed is the same as the new */ |
| if (link_up == old_link && link_speed == old_link_speed) |
| return 0; |
| |
| ice_ptp_link_change(pf, pf->hw.pf_id, link_up); |
| |
| if (ice_is_dcb_active(pf)) { |
| if (test_bit(ICE_FLAG_DCB_ENA, pf->flags)) |
| ice_dcb_rebuild(pf); |
| } else { |
| if (link_up) |
| ice_set_dflt_mib(pf); |
| } |
| ice_vsi_link_event(vsi, link_up); |
| ice_print_link_msg(vsi, link_up); |
| |
| ice_vc_notify_link_state(pf); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_watchdog_subtask - periodic tasks not using event driven scheduling |
| * @pf: board private structure |
| */ |
| static void ice_watchdog_subtask(struct ice_pf *pf) |
| { |
| int i; |
| |
| /* if interface is down do nothing */ |
| if (test_bit(ICE_DOWN, pf->state) || |
| test_bit(ICE_CFG_BUSY, pf->state)) |
| return; |
| |
| /* make sure we don't do these things too often */ |
| if (time_before(jiffies, |
| pf->serv_tmr_prev + pf->serv_tmr_period)) |
| return; |
| |
| pf->serv_tmr_prev = jiffies; |
| |
| /* Update the stats for active netdevs so the network stack |
| * can look at updated numbers whenever it cares to |
| */ |
| ice_update_pf_stats(pf); |
| ice_for_each_vsi(pf, i) |
| if (pf->vsi[i] && pf->vsi[i]->netdev) |
| ice_update_vsi_stats(pf->vsi[i]); |
| } |
| |
| /** |
| * ice_init_link_events - enable/initialize link events |
| * @pi: pointer to the port_info instance |
| * |
| * Returns -EIO on failure, 0 on success |
| */ |
| static int ice_init_link_events(struct ice_port_info *pi) |
| { |
| u16 mask; |
| |
| mask = ~((u16)(ICE_AQ_LINK_EVENT_UPDOWN | ICE_AQ_LINK_EVENT_MEDIA_NA | |
| ICE_AQ_LINK_EVENT_MODULE_QUAL_FAIL | |
| ICE_AQ_LINK_EVENT_PHY_FW_LOAD_FAIL)); |
| |
| if (ice_aq_set_event_mask(pi->hw, pi->lport, mask, NULL)) { |
| dev_dbg(ice_hw_to_dev(pi->hw), "Failed to set link event mask for port %d\n", |
| pi->lport); |
| return -EIO; |
| } |
| |
| if (ice_aq_get_link_info(pi, true, NULL, NULL)) { |
| dev_dbg(ice_hw_to_dev(pi->hw), "Failed to enable link events for port %d\n", |
| pi->lport); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_handle_link_event - handle link event via ARQ |
| * @pf: PF that the link event is associated with |
| * @event: event structure containing link status info |
| */ |
| static int |
| ice_handle_link_event(struct ice_pf *pf, struct ice_rq_event_info *event) |
| { |
| struct ice_aqc_get_link_status_data *link_data; |
| struct ice_port_info *port_info; |
| int status; |
| |
| link_data = (struct ice_aqc_get_link_status_data *)event->msg_buf; |
| port_info = pf->hw.port_info; |
| if (!port_info) |
| return -EINVAL; |
| |
| status = ice_link_event(pf, port_info, |
| !!(link_data->link_info & ICE_AQ_LINK_UP), |
| le16_to_cpu(link_data->link_speed)); |
| if (status) |
| dev_dbg(ice_pf_to_dev(pf), "Could not process link event, error %d\n", |
| status); |
| |
| return status; |
| } |
| |
| enum ice_aq_task_state { |
| ICE_AQ_TASK_WAITING = 0, |
| ICE_AQ_TASK_COMPLETE, |
| ICE_AQ_TASK_CANCELED, |
| }; |
| |
| struct ice_aq_task { |
| struct hlist_node entry; |
| |
| u16 opcode; |
| struct ice_rq_event_info *event; |
| enum ice_aq_task_state state; |
| }; |
| |
| /** |
| * ice_aq_wait_for_event - Wait for an AdminQ event from firmware |
| * @pf: pointer to the PF private structure |
| * @opcode: the opcode to wait for |
| * @timeout: how long to wait, in jiffies |
| * @event: storage for the event info |
| * |
| * Waits for a specific AdminQ completion event on the ARQ for a given PF. The |
| * current thread will be put to sleep until the specified event occurs or |
| * until the given timeout is reached. |
| * |
| * To obtain only the descriptor contents, pass an event without an allocated |
| * msg_buf. If the complete data buffer is desired, allocate the |
| * event->msg_buf with enough space ahead of time. |
| * |
| * Returns: zero on success, or a negative error code on failure. |
| */ |
| int ice_aq_wait_for_event(struct ice_pf *pf, u16 opcode, unsigned long timeout, |
| struct ice_rq_event_info *event) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| struct ice_aq_task *task; |
| unsigned long start; |
| long ret; |
| int err; |
| |
| task = kzalloc(sizeof(*task), GFP_KERNEL); |
| if (!task) |
| return -ENOMEM; |
| |
| INIT_HLIST_NODE(&task->entry); |
| task->opcode = opcode; |
| task->event = event; |
| task->state = ICE_AQ_TASK_WAITING; |
| |
| spin_lock_bh(&pf->aq_wait_lock); |
| hlist_add_head(&task->entry, &pf->aq_wait_list); |
| spin_unlock_bh(&pf->aq_wait_lock); |
| |
| start = jiffies; |
| |
| ret = wait_event_interruptible_timeout(pf->aq_wait_queue, task->state, |
| timeout); |
| switch (task->state) { |
| case ICE_AQ_TASK_WAITING: |
| err = ret < 0 ? ret : -ETIMEDOUT; |
| break; |
| case ICE_AQ_TASK_CANCELED: |
| err = ret < 0 ? ret : -ECANCELED; |
| break; |
| case ICE_AQ_TASK_COMPLETE: |
| err = ret < 0 ? ret : 0; |
| break; |
| default: |
| WARN(1, "Unexpected AdminQ wait task state %u", task->state); |
| err = -EINVAL; |
| break; |
| } |
| |
| dev_dbg(dev, "Waited %u msecs (max %u msecs) for firmware response to op 0x%04x\n", |
| jiffies_to_msecs(jiffies - start), |
| jiffies_to_msecs(timeout), |
| opcode); |
| |
| spin_lock_bh(&pf->aq_wait_lock); |
| hlist_del(&task->entry); |
| spin_unlock_bh(&pf->aq_wait_lock); |
| kfree(task); |
| |
| return err; |
| } |
| |
| /** |
| * ice_aq_check_events - Check if any thread is waiting for an AdminQ event |
| * @pf: pointer to the PF private structure |
| * @opcode: the opcode of the event |
| * @event: the event to check |
| * |
| * Loops over the current list of pending threads waiting for an AdminQ event. |
| * For each matching task, copy the contents of the event into the task |
| * structure and wake up the thread. |
| * |
| * If multiple threads wait for the same opcode, they will all be woken up. |
| * |
| * Note that event->msg_buf will only be duplicated if the event has a buffer |
| * with enough space already allocated. Otherwise, only the descriptor and |
| * message length will be copied. |
| * |
| * Returns: true if an event was found, false otherwise |
| */ |
| static void ice_aq_check_events(struct ice_pf *pf, u16 opcode, |
| struct ice_rq_event_info *event) |
| { |
| struct ice_aq_task *task; |
| bool found = false; |
| |
| spin_lock_bh(&pf->aq_wait_lock); |
| hlist_for_each_entry(task, &pf->aq_wait_list, entry) { |
| if (task->state || task->opcode != opcode) |
| continue; |
| |
| memcpy(&task->event->desc, &event->desc, sizeof(event->desc)); |
| task->event->msg_len = event->msg_len; |
| |
| /* Only copy the data buffer if a destination was set */ |
| if (task->event->msg_buf && |
| task->event->buf_len > event->buf_len) { |
| memcpy(task->event->msg_buf, event->msg_buf, |
| event->buf_len); |
| task->event->buf_len = event->buf_len; |
| } |
| |
| task->state = ICE_AQ_TASK_COMPLETE; |
| found = true; |
| } |
| spin_unlock_bh(&pf->aq_wait_lock); |
| |
| if (found) |
| wake_up(&pf->aq_wait_queue); |
| } |
| |
| /** |
| * ice_aq_cancel_waiting_tasks - Immediately cancel all waiting tasks |
| * @pf: the PF private structure |
| * |
| * Set all waiting tasks to ICE_AQ_TASK_CANCELED, and wake up their threads. |
| * This will then cause ice_aq_wait_for_event to exit with -ECANCELED. |
| */ |
| static void ice_aq_cancel_waiting_tasks(struct ice_pf *pf) |
| { |
| struct ice_aq_task *task; |
| |
| spin_lock_bh(&pf->aq_wait_lock); |
| hlist_for_each_entry(task, &pf->aq_wait_list, entry) |
| task->state = ICE_AQ_TASK_CANCELED; |
| spin_unlock_bh(&pf->aq_wait_lock); |
| |
| wake_up(&pf->aq_wait_queue); |
| } |
| |
| /** |
| * __ice_clean_ctrlq - helper function to clean controlq rings |
| * @pf: ptr to struct ice_pf |
| * @q_type: specific Control queue type |
| */ |
| static int __ice_clean_ctrlq(struct ice_pf *pf, enum ice_ctl_q q_type) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| struct ice_rq_event_info event; |
| struct ice_hw *hw = &pf->hw; |
| struct ice_ctl_q_info *cq; |
| u16 pending, i = 0; |
| const char *qtype; |
| u32 oldval, val; |
| |
| /* Do not clean control queue if/when PF reset fails */ |
| if (test_bit(ICE_RESET_FAILED, pf->state)) |
| return 0; |
| |
| switch (q_type) { |
| case ICE_CTL_Q_ADMIN: |
| cq = &hw->adminq; |
| qtype = "Admin"; |
| break; |
| case ICE_CTL_Q_SB: |
| cq = &hw->sbq; |
| qtype = "Sideband"; |
| break; |
| case ICE_CTL_Q_MAILBOX: |
| cq = &hw->mailboxq; |
| qtype = "Mailbox"; |
| /* we are going to try to detect a malicious VF, so set the |
| * state to begin detection |
| */ |
| hw->mbx_snapshot.mbx_buf.state = ICE_MAL_VF_DETECT_STATE_NEW_SNAPSHOT; |
| break; |
| default: |
| dev_warn(dev, "Unknown control queue type 0x%x\n", q_type); |
| return 0; |
| } |
| |
| /* check for error indications - PF_xx_AxQLEN register layout for |
| * FW/MBX/SB are identical so just use defines for PF_FW_AxQLEN. |
| */ |
| val = rd32(hw, cq->rq.len); |
| if (val & (PF_FW_ARQLEN_ARQVFE_M | PF_FW_ARQLEN_ARQOVFL_M | |
| PF_FW_ARQLEN_ARQCRIT_M)) { |
| oldval = val; |
| if (val & PF_FW_ARQLEN_ARQVFE_M) |
| dev_dbg(dev, "%s Receive Queue VF Error detected\n", |
| qtype); |
| if (val & PF_FW_ARQLEN_ARQOVFL_M) { |
| dev_dbg(dev, "%s Receive Queue Overflow Error detected\n", |
| qtype); |
| } |
| if (val & PF_FW_ARQLEN_ARQCRIT_M) |
| dev_dbg(dev, "%s Receive Queue Critical Error detected\n", |
| qtype); |
| val &= ~(PF_FW_ARQLEN_ARQVFE_M | PF_FW_ARQLEN_ARQOVFL_M | |
| PF_FW_ARQLEN_ARQCRIT_M); |
| if (oldval != val) |
| wr32(hw, cq->rq.len, val); |
| } |
| |
| val = rd32(hw, cq->sq.len); |
| if (val & (PF_FW_ATQLEN_ATQVFE_M | PF_FW_ATQLEN_ATQOVFL_M | |
| PF_FW_ATQLEN_ATQCRIT_M)) { |
| oldval = val; |
| if (val & PF_FW_ATQLEN_ATQVFE_M) |
| dev_dbg(dev, "%s Send Queue VF Error detected\n", |
| qtype); |
| if (val & PF_FW_ATQLEN_ATQOVFL_M) { |
| dev_dbg(dev, "%s Send Queue Overflow Error detected\n", |
| qtype); |
| } |
| if (val & PF_FW_ATQLEN_ATQCRIT_M) |
| dev_dbg(dev, "%s Send Queue Critical Error detected\n", |
| qtype); |
| val &= ~(PF_FW_ATQLEN_ATQVFE_M | PF_FW_ATQLEN_ATQOVFL_M | |
| PF_FW_ATQLEN_ATQCRIT_M); |
| if (oldval != val) |
| wr32(hw, cq->sq.len, val); |
| } |
| |
| event.buf_len = cq->rq_buf_size; |
| event.msg_buf = kzalloc(event.buf_len, GFP_KERNEL); |
| if (!event.msg_buf) |
| return 0; |
| |
| do { |
| u16 opcode; |
| int ret; |
| |
| ret = ice_clean_rq_elem(hw, cq, &event, &pending); |
| if (ret == -EALREADY) |
| break; |
| if (ret) { |
| dev_err(dev, "%s Receive Queue event error %d\n", qtype, |
| ret); |
| break; |
| } |
| |
| opcode = le16_to_cpu(event.desc.opcode); |
| |
| /* Notify any thread that might be waiting for this event */ |
| ice_aq_check_events(pf, opcode, &event); |
| |
| switch (opcode) { |
| case ice_aqc_opc_get_link_status: |
| if (ice_handle_link_event(pf, &event)) |
| dev_err(dev, "Could not handle link event\n"); |
| break; |
| case ice_aqc_opc_event_lan_overflow: |
| ice_vf_lan_overflow_event(pf, &event); |
| break; |
| case ice_mbx_opc_send_msg_to_pf: |
| if (!ice_is_malicious_vf(pf, &event, i, pending)) |
| ice_vc_process_vf_msg(pf, &event); |
| break; |
| case ice_aqc_opc_fw_logging: |
| ice_output_fw_log(hw, &event.desc, event.msg_buf); |
| break; |
| case ice_aqc_opc_lldp_set_mib_change: |
| ice_dcb_process_lldp_set_mib_change(pf, &event); |
| break; |
| default: |
| dev_dbg(dev, "%s Receive Queue unknown event 0x%04x ignored\n", |
| qtype, opcode); |
| break; |
| } |
| } while (pending && (i++ < ICE_DFLT_IRQ_WORK)); |
| |
| kfree(event.msg_buf); |
| |
| return pending && (i == ICE_DFLT_IRQ_WORK); |
| } |
| |
| /** |
| * ice_ctrlq_pending - check if there is a difference between ntc and ntu |
| * @hw: pointer to hardware info |
| * @cq: control queue information |
| * |
| * returns true if there are pending messages in a queue, false if there aren't |
| */ |
| static bool ice_ctrlq_pending(struct ice_hw *hw, struct ice_ctl_q_info *cq) |
| { |
| u16 ntu; |
| |
| ntu = (u16)(rd32(hw, cq->rq.head) & cq->rq.head_mask); |
| return cq->rq.next_to_clean != ntu; |
| } |
| |
| /** |
| * ice_clean_adminq_subtask - clean the AdminQ rings |
| * @pf: board private structure |
| */ |
| static void ice_clean_adminq_subtask(struct ice_pf *pf) |
| { |
| struct ice_hw *hw = &pf->hw; |
| |
| if (!test_bit(ICE_ADMINQ_EVENT_PENDING, pf->state)) |
| return; |
| |
| if (__ice_clean_ctrlq(pf, ICE_CTL_Q_ADMIN)) |
| return; |
| |
| clear_bit(ICE_ADMINQ_EVENT_PENDING, pf->state); |
| |
| /* There might be a situation where new messages arrive to a control |
| * queue between processing the last message and clearing the |
| * EVENT_PENDING bit. So before exiting, check queue head again (using |
| * ice_ctrlq_pending) and process new messages if any. |
| */ |
| if (ice_ctrlq_pending(hw, &hw->adminq)) |
| __ice_clean_ctrlq(pf, ICE_CTL_Q_ADMIN); |
| |
| ice_flush(hw); |
| } |
| |
| /** |
| * ice_clean_mailboxq_subtask - clean the MailboxQ rings |
| * @pf: board private structure |
| */ |
| static void ice_clean_mailboxq_subtask(struct ice_pf *pf) |
| { |
| struct ice_hw *hw = &pf->hw; |
| |
| if (!test_bit(ICE_MAILBOXQ_EVENT_PENDING, pf->state)) |
| return; |
| |
| if (__ice_clean_ctrlq(pf, ICE_CTL_Q_MAILBOX)) |
| return; |
| |
| clear_bit(ICE_MAILBOXQ_EVENT_PENDING, pf->state); |
| |
| if (ice_ctrlq_pending(hw, &hw->mailboxq)) |
| __ice_clean_ctrlq(pf, ICE_CTL_Q_MAILBOX); |
| |
| ice_flush(hw); |
| } |
| |
| /** |
| * ice_clean_sbq_subtask - clean the Sideband Queue rings |
| * @pf: board private structure |
| */ |
| static void ice_clean_sbq_subtask(struct ice_pf *pf) |
| { |
| struct ice_hw *hw = &pf->hw; |
| |
| /* Nothing to do here if sideband queue is not supported */ |
| if (!ice_is_sbq_supported(hw)) { |
| clear_bit(ICE_SIDEBANDQ_EVENT_PENDING, pf->state); |
| return; |
| } |
| |
| if (!test_bit(ICE_SIDEBANDQ_EVENT_PENDING, pf->state)) |
| return; |
| |
| if (__ice_clean_ctrlq(pf, ICE_CTL_Q_SB)) |
| return; |
| |
| clear_bit(ICE_SIDEBANDQ_EVENT_PENDING, pf->state); |
| |
| if (ice_ctrlq_pending(hw, &hw->sbq)) |
| __ice_clean_ctrlq(pf, ICE_CTL_Q_SB); |
| |
| ice_flush(hw); |
| } |
| |
| /** |
| * ice_service_task_schedule - schedule the service task to wake up |
| * @pf: board private structure |
| * |
| * If not already scheduled, this puts the task into the work queue. |
| */ |
| void ice_service_task_schedule(struct ice_pf *pf) |
| { |
| if (!test_bit(ICE_SERVICE_DIS, pf->state) && |
| !test_and_set_bit(ICE_SERVICE_SCHED, pf->state) && |
| !test_bit(ICE_NEEDS_RESTART, pf->state)) |
| queue_work(ice_wq, &pf->serv_task); |
| } |
| |
| /** |
| * ice_service_task_complete - finish up the service task |
| * @pf: board private structure |
| */ |
| static void ice_service_task_complete(struct ice_pf *pf) |
| { |
| WARN_ON(!test_bit(ICE_SERVICE_SCHED, pf->state)); |
| |
| /* force memory (pf->state) to sync before next service task */ |
| smp_mb__before_atomic(); |
| clear_bit(ICE_SERVICE_SCHED, pf->state); |
| } |
| |
| /** |
| * ice_service_task_stop - stop service task and cancel works |
| * @pf: board private structure |
| * |
| * Return 0 if the ICE_SERVICE_DIS bit was not already set, |
| * 1 otherwise. |
| */ |
| static int ice_service_task_stop(struct ice_pf *pf) |
| { |
| int ret; |
| |
| ret = test_and_set_bit(ICE_SERVICE_DIS, pf->state); |
| |
| if (pf->serv_tmr.function) |
| del_timer_sync(&pf->serv_tmr); |
| if (pf->serv_task.func) |
| cancel_work_sync(&pf->serv_task); |
| |
| clear_bit(ICE_SERVICE_SCHED, pf->state); |
| return ret; |
| } |
| |
| /** |
| * ice_service_task_restart - restart service task and schedule works |
| * @pf: board private structure |
| * |
| * This function is needed for suspend and resume works (e.g WoL scenario) |
| */ |
| static void ice_service_task_restart(struct ice_pf *pf) |
| { |
| clear_bit(ICE_SERVICE_DIS, pf->state); |
| ice_service_task_schedule(pf); |
| } |
| |
| /** |
| * ice_service_timer - timer callback to schedule service task |
| * @t: pointer to timer_list |
| */ |
| static void ice_service_timer(struct timer_list *t) |
| { |
| struct ice_pf *pf = from_timer(pf, t, serv_tmr); |
| |
| mod_timer(&pf->serv_tmr, round_jiffies(pf->serv_tmr_period + jiffies)); |
| ice_service_task_schedule(pf); |
| } |
| |
| /** |
| * ice_handle_mdd_event - handle malicious driver detect event |
| * @pf: pointer to the PF structure |
| * |
| * Called from service task. OICR interrupt handler indicates MDD event. |
| * VF MDD logging is guarded by net_ratelimit. Additional PF and VF log |
| * messages are wrapped by netif_msg_[rx|tx]_err. Since VF Rx MDD events |
| * disable the queue, the PF can be configured to reset the VF using ethtool |
| * private flag mdd-auto-reset-vf. |
| */ |
| static void ice_handle_mdd_event(struct ice_pf *pf) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| struct ice_hw *hw = &pf->hw; |
| struct ice_vf *vf; |
| unsigned int bkt; |
| u32 reg; |
| |
| if (!test_and_clear_bit(ICE_MDD_EVENT_PENDING, pf->state)) { |
| /* Since the VF MDD event logging is rate limited, check if |
| * there are pending MDD events. |
| */ |
| ice_print_vfs_mdd_events(pf); |
| return; |
| } |
| |
| /* find what triggered an MDD event */ |
| reg = rd32(hw, GL_MDET_TX_PQM); |
| if (reg & GL_MDET_TX_PQM_VALID_M) { |
| u8 pf_num = (reg & GL_MDET_TX_PQM_PF_NUM_M) >> |
| GL_MDET_TX_PQM_PF_NUM_S; |
| u16 vf_num = (reg & GL_MDET_TX_PQM_VF_NUM_M) >> |
| GL_MDET_TX_PQM_VF_NUM_S; |
| u8 event = (reg & GL_MDET_TX_PQM_MAL_TYPE_M) >> |
| GL_MDET_TX_PQM_MAL_TYPE_S; |
| u16 queue = ((reg & GL_MDET_TX_PQM_QNUM_M) >> |
| GL_MDET_TX_PQM_QNUM_S); |
| |
| if (netif_msg_tx_err(pf)) |
| dev_info(dev, "Malicious Driver Detection event %d on TX queue %d PF# %d VF# %d\n", |
| event, queue, pf_num, vf_num); |
| wr32(hw, GL_MDET_TX_PQM, 0xffffffff); |
| } |
| |
| reg = rd32(hw, GL_MDET_TX_TCLAN); |
| if (reg & GL_MDET_TX_TCLAN_VALID_M) { |
| u8 pf_num = (reg & GL_MDET_TX_TCLAN_PF_NUM_M) >> |
| GL_MDET_TX_TCLAN_PF_NUM_S; |
| u16 vf_num = (reg & GL_MDET_TX_TCLAN_VF_NUM_M) >> |
| GL_MDET_TX_TCLAN_VF_NUM_S; |
| u8 event = (reg & GL_MDET_TX_TCLAN_MAL_TYPE_M) >> |
| GL_MDET_TX_TCLAN_MAL_TYPE_S; |
| u16 queue = ((reg & GL_MDET_TX_TCLAN_QNUM_M) >> |
| GL_MDET_TX_TCLAN_QNUM_S); |
| |
| if (netif_msg_tx_err(pf)) |
| dev_info(dev, "Malicious Driver Detection event %d on TX queue %d PF# %d VF# %d\n", |
| event, queue, pf_num, vf_num); |
| wr32(hw, GL_MDET_TX_TCLAN, 0xffffffff); |
| } |
| |
| reg = rd32(hw, GL_MDET_RX); |
| if (reg & GL_MDET_RX_VALID_M) { |
| u8 pf_num = (reg & GL_MDET_RX_PF_NUM_M) >> |
| GL_MDET_RX_PF_NUM_S; |
| u16 vf_num = (reg & GL_MDET_RX_VF_NUM_M) >> |
| GL_MDET_RX_VF_NUM_S; |
| u8 event = (reg & GL_MDET_RX_MAL_TYPE_M) >> |
| GL_MDET_RX_MAL_TYPE_S; |
| u16 queue = ((reg & GL_MDET_RX_QNUM_M) >> |
| GL_MDET_RX_QNUM_S); |
| |
| if (netif_msg_rx_err(pf)) |
| dev_info(dev, "Malicious Driver Detection event %d on RX queue %d PF# %d VF# %d\n", |
| event, queue, pf_num, vf_num); |
| wr32(hw, GL_MDET_RX, 0xffffffff); |
| } |
| |
| /* check to see if this PF caused an MDD event */ |
| reg = rd32(hw, PF_MDET_TX_PQM); |
| if (reg & PF_MDET_TX_PQM_VALID_M) { |
| wr32(hw, PF_MDET_TX_PQM, 0xFFFF); |
| if (netif_msg_tx_err(pf)) |
| dev_info(dev, "Malicious Driver Detection event TX_PQM detected on PF\n"); |
| } |
| |
| reg = rd32(hw, PF_MDET_TX_TCLAN); |
| if (reg & PF_MDET_TX_TCLAN_VALID_M) { |
| wr32(hw, PF_MDET_TX_TCLAN, 0xFFFF); |
| if (netif_msg_tx_err(pf)) |
| dev_info(dev, "Malicious Driver Detection event TX_TCLAN detected on PF\n"); |
| } |
| |
| reg = rd32(hw, PF_MDET_RX); |
| if (reg & PF_MDET_RX_VALID_M) { |
| wr32(hw, PF_MDET_RX, 0xFFFF); |
| if (netif_msg_rx_err(pf)) |
| dev_info(dev, "Malicious Driver Detection event RX detected on PF\n"); |
| } |
| |
| /* Check to see if one of the VFs caused an MDD event, and then |
| * increment counters and set print pending |
| */ |
| mutex_lock(&pf->vfs.table_lock); |
| ice_for_each_vf(pf, bkt, vf) { |
| reg = rd32(hw, VP_MDET_TX_PQM(vf->vf_id)); |
| if (reg & VP_MDET_TX_PQM_VALID_M) { |
| wr32(hw, VP_MDET_TX_PQM(vf->vf_id), 0xFFFF); |
| vf->mdd_tx_events.count++; |
| set_bit(ICE_MDD_VF_PRINT_PENDING, pf->state); |
| if (netif_msg_tx_err(pf)) |
| dev_info(dev, "Malicious Driver Detection event TX_PQM detected on VF %d\n", |
| vf->vf_id); |
| } |
| |
| reg = rd32(hw, VP_MDET_TX_TCLAN(vf->vf_id)); |
| if (reg & VP_MDET_TX_TCLAN_VALID_M) { |
| wr32(hw, VP_MDET_TX_TCLAN(vf->vf_id), 0xFFFF); |
| vf->mdd_tx_events.count++; |
| set_bit(ICE_MDD_VF_PRINT_PENDING, pf->state); |
| if (netif_msg_tx_err(pf)) |
| dev_info(dev, "Malicious Driver Detection event TX_TCLAN detected on VF %d\n", |
| vf->vf_id); |
| } |
| |
| reg = rd32(hw, VP_MDET_TX_TDPU(vf->vf_id)); |
| if (reg & VP_MDET_TX_TDPU_VALID_M) { |
| wr32(hw, VP_MDET_TX_TDPU(vf->vf_id), 0xFFFF); |
| vf->mdd_tx_events.count++; |
| set_bit(ICE_MDD_VF_PRINT_PENDING, pf->state); |
| if (netif_msg_tx_err(pf)) |
| dev_info(dev, "Malicious Driver Detection event TX_TDPU detected on VF %d\n", |
| vf->vf_id); |
| } |
| |
| reg = rd32(hw, VP_MDET_RX(vf->vf_id)); |
| if (reg & VP_MDET_RX_VALID_M) { |
| wr32(hw, VP_MDET_RX(vf->vf_id), 0xFFFF); |
| vf->mdd_rx_events.count++; |
| set_bit(ICE_MDD_VF_PRINT_PENDING, pf->state); |
| if (netif_msg_rx_err(pf)) |
| dev_info(dev, "Malicious Driver Detection event RX detected on VF %d\n", |
| vf->vf_id); |
| |
| /* Since the queue is disabled on VF Rx MDD events, the |
| * PF can be configured to reset the VF through ethtool |
| * private flag mdd-auto-reset-vf. |
| */ |
| if (test_bit(ICE_FLAG_MDD_AUTO_RESET_VF, pf->flags)) { |
| /* VF MDD event counters will be cleared by |
| * reset, so print the event prior to reset. |
| */ |
| ice_print_vf_rx_mdd_event(vf); |
| ice_reset_vf(vf, ICE_VF_RESET_LOCK); |
| } |
| } |
| } |
| mutex_unlock(&pf->vfs.table_lock); |
| |
| ice_print_vfs_mdd_events(pf); |
| } |
| |
| /** |
| * ice_force_phys_link_state - Force the physical link state |
| * @vsi: VSI to force the physical link state to up/down |
| * @link_up: true/false indicates to set the physical link to up/down |
| * |
| * Force the physical link state by getting the current PHY capabilities from |
| * hardware and setting the PHY config based on the determined capabilities. If |
| * link changes a link event will be triggered because both the Enable Automatic |
| * Link Update and LESM Enable bits are set when setting the PHY capabilities. |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int ice_force_phys_link_state(struct ice_vsi *vsi, bool link_up) |
| { |
| struct ice_aqc_get_phy_caps_data *pcaps; |
| struct ice_aqc_set_phy_cfg_data *cfg; |
| struct ice_port_info *pi; |
| struct device *dev; |
| int retcode; |
| |
| if (!vsi || !vsi->port_info || !vsi->back) |
| return -EINVAL; |
| if (vsi->type != ICE_VSI_PF) |
| return 0; |
| |
| dev = ice_pf_to_dev(vsi->back); |
| |
| pi = vsi->port_info; |
| |
| pcaps = kzalloc(sizeof(*pcaps), GFP_KERNEL); |
| if (!pcaps) |
| return -ENOMEM; |
| |
| retcode = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_ACTIVE_CFG, pcaps, |
| NULL); |
| if (retcode) { |
| dev_err(dev, "Failed to get phy capabilities, VSI %d error %d\n", |
| vsi->vsi_num, retcode); |
| retcode = -EIO; |
| goto out; |
| } |
| |
| /* No change in link */ |
| if (link_up == !!(pcaps->caps & ICE_AQC_PHY_EN_LINK) && |
| link_up == !!(pi->phy.link_info.link_info & ICE_AQ_LINK_UP)) |
| goto out; |
| |
| /* Use the current user PHY configuration. The current user PHY |
| * configuration is initialized during probe from PHY capabilities |
| * software mode, and updated on set PHY configuration. |
| */ |
| cfg = kmemdup(&pi->phy.curr_user_phy_cfg, sizeof(*cfg), GFP_KERNEL); |
| if (!cfg) { |
| retcode = -ENOMEM; |
| goto out; |
| } |
| |
| cfg->caps |= ICE_AQ_PHY_ENA_AUTO_LINK_UPDT; |
| if (link_up) |
| cfg->caps |= ICE_AQ_PHY_ENA_LINK; |
| else |
| cfg->caps &= ~ICE_AQ_PHY_ENA_LINK; |
| |
| retcode = ice_aq_set_phy_cfg(&vsi->back->hw, pi, cfg, NULL); |
| if (retcode) { |
| dev_err(dev, "Failed to set phy config, VSI %d error %d\n", |
| vsi->vsi_num, retcode); |
| retcode = -EIO; |
| } |
| |
| kfree(cfg); |
| out: |
| kfree(pcaps); |
| return retcode; |
| } |
| |
| /** |
| * ice_init_nvm_phy_type - Initialize the NVM PHY type |
| * @pi: port info structure |
| * |
| * Initialize nvm_phy_type_[low|high] for link lenient mode support |
| */ |
| static int ice_init_nvm_phy_type(struct ice_port_info *pi) |
| { |
| struct ice_aqc_get_phy_caps_data *pcaps; |
| struct ice_pf *pf = pi->hw->back; |
| int err; |
| |
| pcaps = kzalloc(sizeof(*pcaps), GFP_KERNEL); |
| if (!pcaps) |
| return -ENOMEM; |
| |
| err = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP_NO_MEDIA, |
| pcaps, NULL); |
| |
| if (err) { |
| dev_err(ice_pf_to_dev(pf), "Get PHY capability failed.\n"); |
| goto out; |
| } |
| |
| pf->nvm_phy_type_hi = pcaps->phy_type_high; |
| pf->nvm_phy_type_lo = pcaps->phy_type_low; |
| |
| out: |
| kfree(pcaps); |
| return err; |
| } |
| |
| /** |
| * ice_init_link_dflt_override - Initialize link default override |
| * @pi: port info structure |
| * |
| * Initialize link default override and PHY total port shutdown during probe |
| */ |
| static void ice_init_link_dflt_override(struct ice_port_info *pi) |
| { |
| struct ice_link_default_override_tlv *ldo; |
| struct ice_pf *pf = pi->hw->back; |
| |
| ldo = &pf->link_dflt_override; |
| if (ice_get_link_default_override(ldo, pi)) |
| return; |
| |
| if (!(ldo->options & ICE_LINK_OVERRIDE_PORT_DIS)) |
| return; |
| |
| /* Enable Total Port Shutdown (override/replace link-down-on-close |
| * ethtool private flag) for ports with Port Disable bit set. |
| */ |
| set_bit(ICE_FLAG_TOTAL_PORT_SHUTDOWN_ENA, pf->flags); |
| set_bit(ICE_FLAG_LINK_DOWN_ON_CLOSE_ENA, pf->flags); |
| } |
| |
| /** |
| * ice_init_phy_cfg_dflt_override - Initialize PHY cfg default override settings |
| * @pi: port info structure |
| * |
| * If default override is enabled, initialize the user PHY cfg speed and FEC |
| * settings using the default override mask from the NVM. |
| * |
| * The PHY should only be configured with the default override settings the |
| * first time media is available. The ICE_LINK_DEFAULT_OVERRIDE_PENDING state |
| * is used to indicate that the user PHY cfg default override is initialized |
| * and the PHY has not been configured with the default override settings. The |
| * state is set here, and cleared in ice_configure_phy the first time the PHY is |
| * configured. |
| * |
| * This function should be called only if the FW doesn't support default |
| * configuration mode, as reported by ice_fw_supports_report_dflt_cfg. |
| */ |
| static void ice_init_phy_cfg_dflt_override(struct ice_port_info *pi) |
| { |
| struct ice_link_default_override_tlv *ldo; |
| struct ice_aqc_set_phy_cfg_data *cfg; |
| struct ice_phy_info *phy = &pi->phy; |
| struct ice_pf *pf = pi->hw->back; |
| |
| ldo = &pf->link_dflt_override; |
| |
| /* If link default override is enabled, use to mask NVM PHY capabilities |
| * for speed and FEC default configuration. |
| */ |
| cfg = &phy->curr_user_phy_cfg; |
| |
| if (ldo->phy_type_low || ldo->phy_type_high) { |
| cfg->phy_type_low = pf->nvm_phy_type_lo & |
| cpu_to_le64(ldo->phy_type_low); |
| cfg->phy_type_high = pf->nvm_phy_type_hi & |
| cpu_to_le64(ldo->phy_type_high); |
| } |
| cfg->link_fec_opt = ldo->fec_options; |
| phy->curr_user_fec_req = ICE_FEC_AUTO; |
| |
| set_bit(ICE_LINK_DEFAULT_OVERRIDE_PENDING, pf->state); |
| } |
| |
| /** |
| * ice_init_phy_user_cfg - Initialize the PHY user configuration |
| * @pi: port info structure |
| * |
| * Initialize the current user PHY configuration, speed, FEC, and FC requested |
| * mode to default. The PHY defaults are from get PHY capabilities topology |
| * with media so call when media is first available. An error is returned if |
| * called when media is not available. The PHY initialization completed state is |
| * set here. |
| * |
| * These configurations are used when setting PHY |
| * configuration. The user PHY configuration is updated on set PHY |
| * configuration. Returns 0 on success, negative on failure |
| */ |
| static int ice_init_phy_user_cfg(struct ice_port_info *pi) |
| { |
| struct ice_aqc_get_phy_caps_data *pcaps; |
| struct ice_phy_info *phy = &pi->phy; |
| struct ice_pf *pf = pi->hw->back; |
| int err; |
| |
| if (!(phy->link_info.link_info & ICE_AQ_MEDIA_AVAILABLE)) |
| return -EIO; |
| |
| pcaps = kzalloc(sizeof(*pcaps), GFP_KERNEL); |
| if (!pcaps) |
| return -ENOMEM; |
| |
| if (ice_fw_supports_report_dflt_cfg(pi->hw)) |
| err = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_DFLT_CFG, |
| pcaps, NULL); |
| else |
| err = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP_MEDIA, |
| pcaps, NULL); |
| if (err) { |
| dev_err(ice_pf_to_dev(pf), "Get PHY capability failed.\n"); |
| goto err_out; |
| } |
| |
| ice_copy_phy_caps_to_cfg(pi, pcaps, &pi->phy.curr_user_phy_cfg); |
| |
| /* check if lenient mode is supported and enabled */ |
| if (ice_fw_supports_link_override(pi->hw) && |
| !(pcaps->module_compliance_enforcement & |
| ICE_AQC_MOD_ENFORCE_STRICT_MODE)) { |
| set_bit(ICE_FLAG_LINK_LENIENT_MODE_ENA, pf->flags); |
| |
| /* if the FW supports default PHY configuration mode, then the driver |
| * does not have to apply link override settings. If not, |
| * initialize user PHY configuration with link override values |
| */ |
| if (!ice_fw_supports_report_dflt_cfg(pi->hw) && |
| (pf->link_dflt_override.options & ICE_LINK_OVERRIDE_EN)) { |
| ice_init_phy_cfg_dflt_override(pi); |
| goto out; |
| } |
| } |
| |
| /* if link default override is not enabled, set user flow control and |
| * FEC settings based on what get_phy_caps returned |
| */ |
| phy->curr_user_fec_req = ice_caps_to_fec_mode(pcaps->caps, |
| pcaps->link_fec_options); |
| phy->curr_user_fc_req = ice_caps_to_fc_mode(pcaps->caps); |
| |
| out: |
| phy->curr_user_speed_req = ICE_AQ_LINK_SPEED_M; |
| set_bit(ICE_PHY_INIT_COMPLETE, pf->state); |
| err_out: |
| kfree(pcaps); |
| return err; |
| } |
| |
| /** |
| * ice_configure_phy - configure PHY |
| * @vsi: VSI of PHY |
| * |
| * Set the PHY configuration. If the current PHY configuration is the same as |
| * the curr_user_phy_cfg, then do nothing to avoid link flap. Otherwise |
| * configure the based get PHY capabilities for topology with media. |
| */ |
| static int ice_configure_phy(struct ice_vsi *vsi) |
| { |
| struct device *dev = ice_pf_to_dev(vsi->back); |
| struct ice_port_info *pi = vsi->port_info; |
| struct ice_aqc_get_phy_caps_data *pcaps; |
| struct ice_aqc_set_phy_cfg_data *cfg; |
| struct ice_phy_info *phy = &pi->phy; |
| struct ice_pf *pf = vsi->back; |
| int err; |
| |
| /* Ensure we have media as we cannot configure a medialess port */ |
| if (!(phy->link_info.link_info & ICE_AQ_MEDIA_AVAILABLE)) |
| return -EPERM; |
| |
| ice_print_topo_conflict(vsi); |
| |
| if (!test_bit(ICE_FLAG_LINK_LENIENT_MODE_ENA, pf->flags) && |
| phy->link_info.topo_media_conflict == ICE_AQ_LINK_TOPO_UNSUPP_MEDIA) |
| return -EPERM; |
| |
| if (test_bit(ICE_FLAG_LINK_DOWN_ON_CLOSE_ENA, pf->flags)) |
| return ice_force_phys_link_state(vsi, true); |
| |
| pcaps = kzalloc(sizeof(*pcaps), GFP_KERNEL); |
| if (!pcaps) |
| return -ENOMEM; |
| |
| /* Get current PHY config */ |
| err = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_ACTIVE_CFG, pcaps, |
| NULL); |
| if (err) { |
| dev_err(dev, "Failed to get PHY configuration, VSI %d error %d\n", |
| vsi->vsi_num, err); |
| goto done; |
| } |
| |
| /* If PHY enable link is configured and configuration has not changed, |
| * there's nothing to do |
| */ |
| if (pcaps->caps & ICE_AQC_PHY_EN_LINK && |
| ice_phy_caps_equals_cfg(pcaps, &phy->curr_user_phy_cfg)) |
| goto done; |
| |
| /* Use PHY topology as baseline for configuration */ |
| memset(pcaps, 0, sizeof(*pcaps)); |
| if (ice_fw_supports_report_dflt_cfg(pi->hw)) |
| err = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_DFLT_CFG, |
| pcaps, NULL); |
| else |
| err = ice_aq_get_phy_caps(pi, false, ICE_AQC_REPORT_TOPO_CAP_MEDIA, |
| pcaps, NULL); |
| if (err) { |
| dev_err(dev, "Failed to get PHY caps, VSI %d error %d\n", |
| vsi->vsi_num, err); |
| goto done; |
| } |
| |
| cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); |
| if (!cfg) { |
| err = -ENOMEM; |
| goto done; |
| } |
| |
| ice_copy_phy_caps_to_cfg(pi, pcaps, cfg); |
| |
| /* Speed - If default override pending, use curr_user_phy_cfg set in |
| * ice_init_phy_user_cfg_ldo. |
| */ |
| if (test_and_clear_bit(ICE_LINK_DEFAULT_OVERRIDE_PENDING, |
| vsi->back->state)) { |
| cfg->phy_type_low = phy->curr_user_phy_cfg.phy_type_low; |
| cfg->phy_type_high = phy->curr_user_phy_cfg.phy_type_high; |
| } else { |
| u64 phy_low = 0, phy_high = 0; |
| |
| ice_update_phy_type(&phy_low, &phy_high, |
| pi->phy.curr_user_speed_req); |
| cfg->phy_type_low = pcaps->phy_type_low & cpu_to_le64(phy_low); |
| cfg->phy_type_high = pcaps->phy_type_high & |
| cpu_to_le64(phy_high); |
| } |
| |
| /* Can't provide what was requested; use PHY capabilities */ |
| if (!cfg->phy_type_low && !cfg->phy_type_high) { |
| cfg->phy_type_low = pcaps->phy_type_low; |
| cfg->phy_type_high = pcaps->phy_type_high; |
| } |
| |
| /* FEC */ |
| ice_cfg_phy_fec(pi, cfg, phy->curr_user_fec_req); |
| |
| /* Can't provide what was requested; use PHY capabilities */ |
| if (cfg->link_fec_opt != |
| (cfg->link_fec_opt & pcaps->link_fec_options)) { |
| cfg->caps |= pcaps->caps & ICE_AQC_PHY_EN_AUTO_FEC; |
| cfg->link_fec_opt = pcaps->link_fec_options; |
| } |
| |
| /* Flow Control - always supported; no need to check against |
| * capabilities |
| */ |
| ice_cfg_phy_fc(pi, cfg, phy->curr_user_fc_req); |
| |
| /* Enable link and link update */ |
| cfg->caps |= ICE_AQ_PHY_ENA_AUTO_LINK_UPDT | ICE_AQ_PHY_ENA_LINK; |
| |
| err = ice_aq_set_phy_cfg(&pf->hw, pi, cfg, NULL); |
| if (err) |
| dev_err(dev, "Failed to set phy config, VSI %d error %d\n", |
| vsi->vsi_num, err); |
| |
| kfree(cfg); |
| done: |
| kfree(pcaps); |
| return err; |
| } |
| |
| /** |
| * ice_check_media_subtask - Check for media |
| * @pf: pointer to PF struct |
| * |
| * If media is available, then initialize PHY user configuration if it is not |
| * been, and configure the PHY if the interface is up. |
| */ |
| static void ice_check_media_subtask(struct ice_pf *pf) |
| { |
| struct ice_port_info *pi; |
| struct ice_vsi *vsi; |
| int err; |
| |
| /* No need to check for media if it's already present */ |
| if (!test_bit(ICE_FLAG_NO_MEDIA, pf->flags)) |
| return; |
| |
| vsi = ice_get_main_vsi(pf); |
| if (!vsi) |
| return; |
| |
| /* Refresh link info and check if media is present */ |
| pi = vsi->port_info; |
| err = ice_update_link_info(pi); |
| if (err) |
| return; |
| |
| ice_check_link_cfg_err(pf, pi->phy.link_info.link_cfg_err); |
| |
| if (pi->phy.link_info.link_info & ICE_AQ_MEDIA_AVAILABLE) { |
| if (!test_bit(ICE_PHY_INIT_COMPLETE, pf->state)) |
| ice_init_phy_user_cfg(pi); |
| |
| /* PHY settings are reset on media insertion, reconfigure |
| * PHY to preserve settings. |
| */ |
| if (test_bit(ICE_VSI_DOWN, vsi->state) && |
| test_bit(ICE_FLAG_LINK_DOWN_ON_CLOSE_ENA, vsi->back->flags)) |
| return; |
| |
| err = ice_configure_phy(vsi); |
| if (!err) |
| clear_bit(ICE_FLAG_NO_MEDIA, pf->flags); |
| |
| /* A Link Status Event will be generated; the event handler |
| * will complete bringing the interface up |
| */ |
| } |
| } |
| |
| /** |
| * ice_service_task - manage and run subtasks |
| * @work: pointer to work_struct contained by the PF struct |
| */ |
| static void ice_service_task(struct work_struct *work) |
| { |
| struct ice_pf *pf = container_of(work, struct ice_pf, serv_task); |
| unsigned long start_time = jiffies; |
| |
| /* subtasks */ |
| |
| /* process reset requests first */ |
| ice_reset_subtask(pf); |
| |
| /* bail if a reset/recovery cycle is pending or rebuild failed */ |
| if (ice_is_reset_in_progress(pf->state) || |
| test_bit(ICE_SUSPENDED, pf->state) || |
| test_bit(ICE_NEEDS_RESTART, pf->state)) { |
| ice_service_task_complete(pf); |
| return; |
| } |
| |
| if (test_and_clear_bit(ICE_AUX_ERR_PENDING, pf->state)) { |
| struct iidc_event *event; |
| |
| event = kzalloc(sizeof(*event), GFP_KERNEL); |
| if (event) { |
| set_bit(IIDC_EVENT_CRIT_ERR, event->type); |
| /* report the entire OICR value to AUX driver */ |
| swap(event->reg, pf->oicr_err_reg); |
| ice_send_event_to_aux(pf, event); |
| kfree(event); |
| } |
| } |
| |
| if (test_bit(ICE_FLAG_PLUG_AUX_DEV, pf->flags)) { |
| /* Plug aux device per request */ |
| ice_plug_aux_dev(pf); |
| |
| /* Mark plugging as done but check whether unplug was |
| * requested during ice_plug_aux_dev() call |
| * (e.g. from ice_clear_rdma_cap()) and if so then |
| * plug aux device. |
| */ |
| if (!test_and_clear_bit(ICE_FLAG_PLUG_AUX_DEV, pf->flags)) |
| ice_unplug_aux_dev(pf); |
| } |
| |
| if (test_and_clear_bit(ICE_FLAG_MTU_CHANGED, pf->flags)) { |
| struct iidc_event *event; |
| |
| event = kzalloc(sizeof(*event), GFP_KERNEL); |
| if (event) { |
| set_bit(IIDC_EVENT_AFTER_MTU_CHANGE, event->type); |
| ice_send_event_to_aux(pf, event); |
| kfree(event); |
| } |
| } |
| |
| ice_clean_adminq_subtask(pf); |
| ice_check_media_subtask(pf); |
| ice_check_for_hang_subtask(pf); |
| ice_sync_fltr_subtask(pf); |
| ice_handle_mdd_event(pf); |
| ice_watchdog_subtask(pf); |
| |
| if (ice_is_safe_mode(pf)) { |
| ice_service_task_complete(pf); |
| return; |
| } |
| |
| ice_process_vflr_event(pf); |
| ice_clean_mailboxq_subtask(pf); |
| ice_clean_sbq_subtask(pf); |
| ice_sync_arfs_fltrs(pf); |
| ice_flush_fdir_ctx(pf); |
| |
| /* Clear ICE_SERVICE_SCHED flag to allow scheduling next event */ |
| ice_service_task_complete(pf); |
| |
| /* If the tasks have taken longer than one service timer period |
| * or there is more work to be done, reset the service timer to |
| * schedule the service task now. |
| */ |
| if (time_after(jiffies, (start_time + pf->serv_tmr_period)) || |
| test_bit(ICE_MDD_EVENT_PENDING, pf->state) || |
| test_bit(ICE_VFLR_EVENT_PENDING, pf->state) || |
| test_bit(ICE_MAILBOXQ_EVENT_PENDING, pf->state) || |
| test_bit(ICE_FD_VF_FLUSH_CTX, pf->state) || |
| test_bit(ICE_SIDEBANDQ_EVENT_PENDING, pf->state) || |
| test_bit(ICE_ADMINQ_EVENT_PENDING, pf->state)) |
| mod_timer(&pf->serv_tmr, jiffies); |
| } |
| |
| /** |
| * ice_set_ctrlq_len - helper function to set controlq length |
| * @hw: pointer to the HW instance |
| */ |
| static void ice_set_ctrlq_len(struct ice_hw *hw) |
| { |
| hw->adminq.num_rq_entries = ICE_AQ_LEN; |
| hw->adminq.num_sq_entries = ICE_AQ_LEN; |
| hw->adminq.rq_buf_size = ICE_AQ_MAX_BUF_LEN; |
| hw->adminq.sq_buf_size = ICE_AQ_MAX_BUF_LEN; |
| hw->mailboxq.num_rq_entries = PF_MBX_ARQLEN_ARQLEN_M; |
| hw->mailboxq.num_sq_entries = ICE_MBXSQ_LEN; |
| hw->mailboxq.rq_buf_size = ICE_MBXQ_MAX_BUF_LEN; |
| hw->mailboxq.sq_buf_size = ICE_MBXQ_MAX_BUF_LEN; |
| hw->sbq.num_rq_entries = ICE_SBQ_LEN; |
| hw->sbq.num_sq_entries = ICE_SBQ_LEN; |
| hw->sbq.rq_buf_size = ICE_SBQ_MAX_BUF_LEN; |
| hw->sbq.sq_buf_size = ICE_SBQ_MAX_BUF_LEN; |
| } |
| |
| /** |
| * ice_schedule_reset - schedule a reset |
| * @pf: board private structure |
| * @reset: reset being requested |
| */ |
| int ice_schedule_reset(struct ice_pf *pf, enum ice_reset_req reset) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| |
| /* bail out if earlier reset has failed */ |
| if (test_bit(ICE_RESET_FAILED, pf->state)) { |
| dev_dbg(dev, "earlier reset has failed\n"); |
| return -EIO; |
| } |
| /* bail if reset/recovery already in progress */ |
| if (ice_is_reset_in_progress(pf->state)) { |
| dev_dbg(dev, "Reset already in progress\n"); |
| return -EBUSY; |
| } |
| |
| switch (reset) { |
| case ICE_RESET_PFR: |
| set_bit(ICE_PFR_REQ, pf->state); |
| break; |
| case ICE_RESET_CORER: |
| set_bit(ICE_CORER_REQ, pf->state); |
| break; |
| case ICE_RESET_GLOBR: |
| set_bit(ICE_GLOBR_REQ, pf->state); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| ice_service_task_schedule(pf); |
| return 0; |
| } |
| |
| /** |
| * ice_irq_affinity_notify - Callback for affinity changes |
| * @notify: context as to what irq was changed |
| * @mask: the new affinity mask |
| * |
| * This is a callback function used by the irq_set_affinity_notifier function |
| * so that we may register to receive changes to the irq affinity masks. |
| */ |
| static void |
| ice_irq_affinity_notify(struct irq_affinity_notify *notify, |
| const cpumask_t *mask) |
| { |
| struct ice_q_vector *q_vector = |
| container_of(notify, struct ice_q_vector, affinity_notify); |
| |
| cpumask_copy(&q_vector->affinity_mask, mask); |
| } |
| |
| /** |
| * ice_irq_affinity_release - Callback for affinity notifier release |
| * @ref: internal core kernel usage |
| * |
| * This is a callback function used by the irq_set_affinity_notifier function |
| * to inform the current notification subscriber that they will no longer |
| * receive notifications. |
| */ |
| static void ice_irq_affinity_release(struct kref __always_unused *ref) {} |
| |
| /** |
| * ice_vsi_ena_irq - Enable IRQ for the given VSI |
| * @vsi: the VSI being configured |
| */ |
| static int ice_vsi_ena_irq(struct ice_vsi *vsi) |
| { |
| struct ice_hw *hw = &vsi->back->hw; |
| int i; |
| |
| ice_for_each_q_vector(vsi, i) |
| ice_irq_dynamic_ena(hw, vsi, vsi->q_vectors[i]); |
| |
| ice_flush(hw); |
| return 0; |
| } |
| |
| /** |
| * ice_vsi_req_irq_msix - get MSI-X vectors from the OS for the VSI |
| * @vsi: the VSI being configured |
| * @basename: name for the vector |
| */ |
| static int ice_vsi_req_irq_msix(struct ice_vsi *vsi, char *basename) |
| { |
| int q_vectors = vsi->num_q_vectors; |
| struct ice_pf *pf = vsi->back; |
| int base = vsi->base_vector; |
| struct device *dev; |
| int rx_int_idx = 0; |
| int tx_int_idx = 0; |
| int vector, err; |
| int irq_num; |
| |
| dev = ice_pf_to_dev(pf); |
| for (vector = 0; vector < q_vectors; vector++) { |
| struct ice_q_vector *q_vector = vsi->q_vectors[vector]; |
| |
| irq_num = pf->msix_entries[base + vector].vector; |
| |
| if (q_vector->tx.tx_ring && q_vector->rx.rx_ring) { |
| snprintf(q_vector->name, sizeof(q_vector->name) - 1, |
| "%s-%s-%d", basename, "TxRx", rx_int_idx++); |
| tx_int_idx++; |
| } else if (q_vector->rx.rx_ring) { |
| snprintf(q_vector->name, sizeof(q_vector->name) - 1, |
| "%s-%s-%d", basename, "rx", rx_int_idx++); |
| } else if (q_vector->tx.tx_ring) { |
| snprintf(q_vector->name, sizeof(q_vector->name) - 1, |
| "%s-%s-%d", basename, "tx", tx_int_idx++); |
| } else { |
| /* skip this unused q_vector */ |
| continue; |
| } |
| if (vsi->type == ICE_VSI_CTRL && vsi->vf) |
| err = devm_request_irq(dev, irq_num, vsi->irq_handler, |
| IRQF_SHARED, q_vector->name, |
| q_vector); |
| else |
| err = devm_request_irq(dev, irq_num, vsi->irq_handler, |
| 0, q_vector->name, q_vector); |
| if (err) { |
| netdev_err(vsi->netdev, "MSIX request_irq failed, error: %d\n", |
| err); |
| goto free_q_irqs; |
| } |
| |
| /* register for affinity change notifications */ |
| if (!IS_ENABLED(CONFIG_RFS_ACCEL)) { |
| struct irq_affinity_notify *affinity_notify; |
| |
| affinity_notify = &q_vector->affinity_notify; |
| affinity_notify->notify = ice_irq_affinity_notify; |
| affinity_notify->release = ice_irq_affinity_release; |
| irq_set_affinity_notifier(irq_num, affinity_notify); |
| } |
| |
| /* assign the mask for this irq */ |
| irq_set_affinity_hint(irq_num, &q_vector->affinity_mask); |
| } |
| |
| err = ice_set_cpu_rx_rmap(vsi); |
| if (err) { |
| netdev_err(vsi->netdev, "Failed to setup CPU RMAP on VSI %u: %pe\n", |
| vsi->vsi_num, ERR_PTR(err)); |
| goto free_q_irqs; |
| } |
| |
| vsi->irqs_ready = true; |
| return 0; |
| |
| free_q_irqs: |
| while (vector) { |
| vector--; |
| irq_num = pf->msix_entries[base + vector].vector; |
| if (!IS_ENABLED(CONFIG_RFS_ACCEL)) |
| irq_set_affinity_notifier(irq_num, NULL); |
| irq_set_affinity_hint(irq_num, NULL); |
| devm_free_irq(dev, irq_num, &vsi->q_vectors[vector]); |
| } |
| return err; |
| } |
| |
| /** |
| * ice_xdp_alloc_setup_rings - Allocate and setup Tx rings for XDP |
| * @vsi: VSI to setup Tx rings used by XDP |
| * |
| * Return 0 on success and negative value on error |
| */ |
| static int ice_xdp_alloc_setup_rings(struct ice_vsi *vsi) |
| { |
| struct device *dev = ice_pf_to_dev(vsi->back); |
| struct ice_tx_desc *tx_desc; |
| int i, j; |
| |
| ice_for_each_xdp_txq(vsi, i) { |
| u16 xdp_q_idx = vsi->alloc_txq + i; |
| struct ice_ring_stats *ring_stats; |
| struct ice_tx_ring *xdp_ring; |
| |
| xdp_ring = kzalloc(sizeof(*xdp_ring), GFP_KERNEL); |
| if (!xdp_ring) |
| goto free_xdp_rings; |
| |
| ring_stats = kzalloc(sizeof(*ring_stats), GFP_KERNEL); |
| if (!ring_stats) { |
| ice_free_tx_ring(xdp_ring); |
| goto free_xdp_rings; |
| } |
| |
| xdp_ring->ring_stats = ring_stats; |
| xdp_ring->q_index = xdp_q_idx; |
| xdp_ring->reg_idx = vsi->txq_map[xdp_q_idx]; |
| xdp_ring->vsi = vsi; |
| xdp_ring->netdev = NULL; |
| xdp_ring->dev = dev; |
| xdp_ring->count = vsi->num_tx_desc; |
| xdp_ring->next_dd = ICE_RING_QUARTER(xdp_ring) - 1; |
| xdp_ring->next_rs = ICE_RING_QUARTER(xdp_ring) - 1; |
| WRITE_ONCE(vsi->xdp_rings[i], xdp_ring); |
| if (ice_setup_tx_ring(xdp_ring)) |
| goto free_xdp_rings; |
| ice_set_ring_xdp(xdp_ring); |
| spin_lock_init(&xdp_ring->tx_lock); |
| for (j = 0; j < xdp_ring->count; j++) { |
| tx_desc = ICE_TX_DESC(xdp_ring, j); |
| tx_desc->cmd_type_offset_bsz = 0; |
| } |
| } |
| |
| return 0; |
| |
| free_xdp_rings: |
| for (; i >= 0; i--) { |
| if (vsi->xdp_rings[i] && vsi->xdp_rings[i]->desc) { |
| kfree_rcu(vsi->xdp_rings[i]->ring_stats, rcu); |
| vsi->xdp_rings[i]->ring_stats = NULL; |
| ice_free_tx_ring(vsi->xdp_rings[i]); |
| } |
| } |
| return -ENOMEM; |
| } |
| |
| /** |
| * ice_vsi_assign_bpf_prog - set or clear bpf prog pointer on VSI |
| * @vsi: VSI to set the bpf prog on |
| * @prog: the bpf prog pointer |
| */ |
| static void ice_vsi_assign_bpf_prog(struct ice_vsi *vsi, struct bpf_prog *prog) |
| { |
| struct bpf_prog *old_prog; |
| int i; |
| |
| old_prog = xchg(&vsi->xdp_prog, prog); |
| if (old_prog) |
| bpf_prog_put(old_prog); |
| |
| ice_for_each_rxq(vsi, i) |
| WRITE_ONCE(vsi->rx_rings[i]->xdp_prog, vsi->xdp_prog); |
| } |
| |
| /** |
| * ice_prepare_xdp_rings - Allocate, configure and setup Tx rings for XDP |
| * @vsi: VSI to bring up Tx rings used by XDP |
| * @prog: bpf program that will be assigned to VSI |
| * |
| * Return 0 on success and negative value on error |
| */ |
| int ice_prepare_xdp_rings(struct ice_vsi *vsi, struct bpf_prog *prog) |
| { |
| u16 max_txqs[ICE_MAX_TRAFFIC_CLASS] = { 0 }; |
| int xdp_rings_rem = vsi->num_xdp_txq; |
| struct ice_pf *pf = vsi->back; |
| struct ice_qs_cfg xdp_qs_cfg = { |
| .qs_mutex = &pf->avail_q_mutex, |
| .pf_map = pf->avail_txqs, |
| .pf_map_size = pf->max_pf_txqs, |
| .q_count = vsi->num_xdp_txq, |
| .scatter_count = ICE_MAX_SCATTER_TXQS, |
| .vsi_map = vsi->txq_map, |
| .vsi_map_offset = vsi->alloc_txq, |
| .mapping_mode = ICE_VSI_MAP_CONTIG |
| }; |
| struct device *dev; |
| int i, v_idx; |
| int status; |
| |
| dev = ice_pf_to_dev(pf); |
| vsi->xdp_rings = devm_kcalloc(dev, vsi->num_xdp_txq, |
| sizeof(*vsi->xdp_rings), GFP_KERNEL); |
| if (!vsi->xdp_rings) |
| return -ENOMEM; |
| |
| vsi->xdp_mapping_mode = xdp_qs_cfg.mapping_mode; |
| if (__ice_vsi_get_qs(&xdp_qs_cfg)) |
| goto err_map_xdp; |
| |
| if (static_key_enabled(&ice_xdp_locking_key)) |
| netdev_warn(vsi->netdev, |
| "Could not allocate one XDP Tx ring per CPU, XDP_TX/XDP_REDIRECT actions will be slower\n"); |
| |
| if (ice_xdp_alloc_setup_rings(vsi)) |
| goto clear_xdp_rings; |
| |
| /* follow the logic from ice_vsi_map_rings_to_vectors */ |
| ice_for_each_q_vector(vsi, v_idx) { |
| struct ice_q_vector *q_vector = vsi->q_vectors[v_idx]; |
| int xdp_rings_per_v, q_id, q_base; |
| |
| xdp_rings_per_v = DIV_ROUND_UP(xdp_rings_rem, |
| vsi->num_q_vectors - v_idx); |
| q_base = vsi->num_xdp_txq - xdp_rings_rem; |
| |
| for (q_id = q_base; q_id < (q_base + xdp_rings_per_v); q_id++) { |
| struct ice_tx_ring *xdp_ring = vsi->xdp_rings[q_id]; |
| |
| xdp_ring->q_vector = q_vector; |
| xdp_ring->next = q_vector->tx.tx_ring; |
| q_vector->tx.tx_ring = xdp_ring; |
| } |
| xdp_rings_rem -= xdp_rings_per_v; |
| } |
| |
| ice_for_each_rxq(vsi, i) { |
| if (static_key_enabled(&ice_xdp_locking_key)) { |
| vsi->rx_rings[i]->xdp_ring = vsi->xdp_rings[i % vsi->num_xdp_txq]; |
| } else { |
| struct ice_q_vector *q_vector = vsi->rx_rings[i]->q_vector; |
| struct ice_tx_ring *ring; |
| |
| ice_for_each_tx_ring(ring, q_vector->tx) { |
| if (ice_ring_is_xdp(ring)) { |
| vsi->rx_rings[i]->xdp_ring = ring; |
| break; |
| } |
| } |
| } |
| ice_tx_xsk_pool(vsi, i); |
| } |
| |
| /* omit the scheduler update if in reset path; XDP queues will be |
| * taken into account at the end of ice_vsi_rebuild, where |
| * ice_cfg_vsi_lan is being called |
| */ |
| if (ice_is_reset_in_progress(pf->state)) |
| return 0; |
| |
| /* tell the Tx scheduler that right now we have |
| * additional queues |
| */ |
| for (i = 0; i < vsi->tc_cfg.numtc; i++) |
| max_txqs[i] = vsi->num_txq + vsi->num_xdp_txq; |
| |
| status = ice_cfg_vsi_lan(vsi->port_info, vsi->idx, vsi->tc_cfg.ena_tc, |
| max_txqs); |
| if (status) { |
| dev_err(dev, "Failed VSI LAN queue config for XDP, error: %d\n", |
| status); |
| goto clear_xdp_rings; |
| } |
| |
| /* assign the prog only when it's not already present on VSI; |
| * this flow is a subject of both ethtool -L and ndo_bpf flows; |
| * VSI rebuild that happens under ethtool -L can expose us to |
| * the bpf_prog refcount issues as we would be swapping same |
| * bpf_prog pointers from vsi->xdp_prog and calling bpf_prog_put |
| * on it as it would be treated as an 'old_prog'; for ndo_bpf |
| * this is not harmful as dev_xdp_install bumps the refcount |
| * before calling the op exposed by the driver; |
| */ |
| if (!ice_is_xdp_ena_vsi(vsi)) |
| ice_vsi_assign_bpf_prog(vsi, prog); |
| |
| return 0; |
| clear_xdp_rings: |
| ice_for_each_xdp_txq(vsi, i) |
| if (vsi->xdp_rings[i]) { |
| kfree_rcu(vsi->xdp_rings[i], rcu); |
| vsi->xdp_rings[i] = NULL; |
| } |
| |
| err_map_xdp: |
| mutex_lock(&pf->avail_q_mutex); |
| ice_for_each_xdp_txq(vsi, i) { |
| clear_bit(vsi->txq_map[i + vsi->alloc_txq], pf->avail_txqs); |
| vsi->txq_map[i + vsi->alloc_txq] = ICE_INVAL_Q_INDEX; |
| } |
| mutex_unlock(&pf->avail_q_mutex); |
| |
| devm_kfree(dev, vsi->xdp_rings); |
| return -ENOMEM; |
| } |
| |
| /** |
| * ice_destroy_xdp_rings - undo the configuration made by ice_prepare_xdp_rings |
| * @vsi: VSI to remove XDP rings |
| * |
| * Detach XDP rings from irq vectors, clean up the PF bitmap and free |
| * resources |
| */ |
| int ice_destroy_xdp_rings(struct ice_vsi *vsi) |
| { |
| u16 max_txqs[ICE_MAX_TRAFFIC_CLASS] = { 0 }; |
| struct ice_pf *pf = vsi->back; |
| int i, v_idx; |
| |
| /* q_vectors are freed in reset path so there's no point in detaching |
| * rings; in case of rebuild being triggered not from reset bits |
| * in pf->state won't be set, so additionally check first q_vector |
| * against NULL |
| */ |
| if (ice_is_reset_in_progress(pf->state) || !vsi->q_vectors[0]) |
| goto free_qmap; |
| |
| ice_for_each_q_vector(vsi, v_idx) { |
| struct ice_q_vector *q_vector = vsi->q_vectors[v_idx]; |
| struct ice_tx_ring *ring; |
| |
| ice_for_each_tx_ring(ring, q_vector->tx) |
| if (!ring->tx_buf || !ice_ring_is_xdp(ring)) |
| break; |
| |
| /* restore the value of last node prior to XDP setup */ |
| q_vector->tx.tx_ring = ring; |
| } |
| |
| free_qmap: |
| mutex_lock(&pf->avail_q_mutex); |
| ice_for_each_xdp_txq(vsi, i) { |
| clear_bit(vsi->txq_map[i + vsi->alloc_txq], pf->avail_txqs); |
| vsi->txq_map[i + vsi->alloc_txq] = ICE_INVAL_Q_INDEX; |
| } |
| mutex_unlock(&pf->avail_q_mutex); |
| |
| ice_for_each_xdp_txq(vsi, i) |
| if (vsi->xdp_rings[i]) { |
| if (vsi->xdp_rings[i]->desc) { |
| synchronize_rcu(); |
| ice_free_tx_ring(vsi->xdp_rings[i]); |
| } |
| kfree_rcu(vsi->xdp_rings[i]->ring_stats, rcu); |
| vsi->xdp_rings[i]->ring_stats = NULL; |
| kfree_rcu(vsi->xdp_rings[i], rcu); |
| vsi->xdp_rings[i] = NULL; |
| } |
| |
| devm_kfree(ice_pf_to_dev(pf), vsi->xdp_rings); |
| vsi->xdp_rings = NULL; |
| |
| if (static_key_enabled(&ice_xdp_locking_key)) |
| static_branch_dec(&ice_xdp_locking_key); |
| |
| if (ice_is_reset_in_progress(pf->state) || !vsi->q_vectors[0]) |
| return 0; |
| |
| ice_vsi_assign_bpf_prog(vsi, NULL); |
| |
| /* notify Tx scheduler that we destroyed XDP queues and bring |
| * back the old number of child nodes |
| */ |
| for (i = 0; i < vsi->tc_cfg.numtc; i++) |
| max_txqs[i] = vsi->num_txq; |
| |
| /* change number of XDP Tx queues to 0 */ |
| vsi->num_xdp_txq = 0; |
| |
| return ice_cfg_vsi_lan(vsi->port_info, vsi->idx, vsi->tc_cfg.ena_tc, |
| max_txqs); |
| } |
| |
| /** |
| * ice_vsi_rx_napi_schedule - Schedule napi on RX queues from VSI |
| * @vsi: VSI to schedule napi on |
| */ |
| static void ice_vsi_rx_napi_schedule(struct ice_vsi *vsi) |
| { |
| int i; |
| |
| ice_for_each_rxq(vsi, i) { |
| struct ice_rx_ring *rx_ring = vsi->rx_rings[i]; |
| |
| if (rx_ring->xsk_pool) |
| napi_schedule(&rx_ring->q_vector->napi); |
| } |
| } |
| |
| /** |
| * ice_vsi_determine_xdp_res - figure out how many Tx qs can XDP have |
| * @vsi: VSI to determine the count of XDP Tx qs |
| * |
| * returns 0 if Tx qs count is higher than at least half of CPU count, |
| * -ENOMEM otherwise |
| */ |
| int ice_vsi_determine_xdp_res(struct ice_vsi *vsi) |
| { |
| u16 avail = ice_get_avail_txq_count(vsi->back); |
| u16 cpus = num_possible_cpus(); |
| |
| if (avail < cpus / 2) |
| return -ENOMEM; |
| |
| vsi->num_xdp_txq = min_t(u16, avail, cpus); |
| |
| if (vsi->num_xdp_txq < cpus) |
| static_branch_inc(&ice_xdp_locking_key); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_xdp_setup_prog - Add or remove XDP eBPF program |
| * @vsi: VSI to setup XDP for |
| * @prog: XDP program |
| * @extack: netlink extended ack |
| */ |
| static int |
| ice_xdp_setup_prog(struct ice_vsi *vsi, struct bpf_prog *prog, |
| struct netlink_ext_ack *extack) |
| { |
| int frame_size = vsi->netdev->mtu + ICE_ETH_PKT_HDR_PAD; |
| bool if_running = netif_running(vsi->netdev); |
| int ret = 0, xdp_ring_err = 0; |
| |
| if (frame_size > vsi->rx_buf_len) { |
| NL_SET_ERR_MSG_MOD(extack, "MTU too large for loading XDP"); |
| return -EOPNOTSUPP; |
| } |
| |
| /* need to stop netdev while setting up the program for Rx rings */ |
| if (if_running && !test_and_set_bit(ICE_VSI_DOWN, vsi->state)) { |
| ret = ice_down(vsi); |
| if (ret) { |
| NL_SET_ERR_MSG_MOD(extack, "Preparing device for XDP attach failed"); |
| return ret; |
| } |
| } |
| |
| if (!ice_is_xdp_ena_vsi(vsi) && prog) { |
| xdp_ring_err = ice_vsi_determine_xdp_res(vsi); |
| if (xdp_ring_err) { |
| NL_SET_ERR_MSG_MOD(extack, "Not enough Tx resources for XDP"); |
| } else { |
| xdp_ring_err = ice_prepare_xdp_rings(vsi, prog); |
| if (xdp_ring_err) |
| NL_SET_ERR_MSG_MOD(extack, "Setting up XDP Tx resources failed"); |
| } |
| /* reallocate Rx queues that are used for zero-copy */ |
| xdp_ring_err = ice_realloc_zc_buf(vsi, true); |
| if (xdp_ring_err) |
| NL_SET_ERR_MSG_MOD(extack, "Setting up XDP Rx resources failed"); |
| } else if (ice_is_xdp_ena_vsi(vsi) && !prog) { |
| xdp_ring_err = ice_destroy_xdp_rings(vsi); |
| if (xdp_ring_err) |
| NL_SET_ERR_MSG_MOD(extack, "Freeing XDP Tx resources failed"); |
| /* reallocate Rx queues that were used for zero-copy */ |
| xdp_ring_err = ice_realloc_zc_buf(vsi, false); |
| if (xdp_ring_err) |
| NL_SET_ERR_MSG_MOD(extack, "Freeing XDP Rx resources failed"); |
| } else { |
| /* safe to call even when prog == vsi->xdp_prog as |
| * dev_xdp_install in net/core/dev.c incremented prog's |
| * refcount so corresponding bpf_prog_put won't cause |
| * underflow |
| */ |
| ice_vsi_assign_bpf_prog(vsi, prog); |
| } |
| |
| if (if_running) |
| ret = ice_up(vsi); |
| |
| if (!ret && prog) |
| ice_vsi_rx_napi_schedule(vsi); |
| |
| return (ret || xdp_ring_err) ? -ENOMEM : 0; |
| } |
| |
| /** |
| * ice_xdp_safe_mode - XDP handler for safe mode |
| * @dev: netdevice |
| * @xdp: XDP command |
| */ |
| static int ice_xdp_safe_mode(struct net_device __always_unused *dev, |
| struct netdev_bpf *xdp) |
| { |
| NL_SET_ERR_MSG_MOD(xdp->extack, |
| "Please provide working DDP firmware package in order to use XDP\n" |
| "Refer to Documentation/networking/device_drivers/ethernet/intel/ice.rst"); |
| return -EOPNOTSUPP; |
| } |
| |
| /** |
| * ice_xdp - implements XDP handler |
| * @dev: netdevice |
| * @xdp: XDP command |
| */ |
| static int ice_xdp(struct net_device *dev, struct netdev_bpf *xdp) |
| { |
| struct ice_netdev_priv *np = netdev_priv(dev); |
| struct ice_vsi *vsi = np->vsi; |
| |
| if (vsi->type != ICE_VSI_PF) { |
| NL_SET_ERR_MSG_MOD(xdp->extack, "XDP can be loaded only on PF VSI"); |
| return -EINVAL; |
| } |
| |
| switch (xdp->command) { |
| case XDP_SETUP_PROG: |
| return ice_xdp_setup_prog(vsi, xdp->prog, xdp->extack); |
| case XDP_SETUP_XSK_POOL: |
| return ice_xsk_pool_setup(vsi, xdp->xsk.pool, |
| xdp->xsk.queue_id); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /** |
| * ice_ena_misc_vector - enable the non-queue interrupts |
| * @pf: board private structure |
| */ |
| static void ice_ena_misc_vector(struct ice_pf *pf) |
| { |
| struct ice_hw *hw = &pf->hw; |
| u32 val; |
| |
| /* Disable anti-spoof detection interrupt to prevent spurious event |
| * interrupts during a function reset. Anti-spoof functionally is |
| * still supported. |
| */ |
| val = rd32(hw, GL_MDCK_TX_TDPU); |
| val |= GL_MDCK_TX_TDPU_RCU_ANTISPOOF_ITR_DIS_M; |
| wr32(hw, GL_MDCK_TX_TDPU, val); |
| |
| /* clear things first */ |
| wr32(hw, PFINT_OICR_ENA, 0); /* disable all */ |
| rd32(hw, PFINT_OICR); /* read to clear */ |
| |
| val = (PFINT_OICR_ECC_ERR_M | |
| PFINT_OICR_MAL_DETECT_M | |
| PFINT_OICR_GRST_M | |
| PFINT_OICR_PCI_EXCEPTION_M | |
| PFINT_OICR_VFLR_M | |
| PFINT_OICR_HMC_ERR_M | |
| PFINT_OICR_PE_PUSH_M | |
| PFINT_OICR_PE_CRITERR_M); |
| |
| wr32(hw, PFINT_OICR_ENA, val); |
| |
| /* SW_ITR_IDX = 0, but don't change INTENA */ |
| wr32(hw, GLINT_DYN_CTL(pf->oicr_idx), |
| GLINT_DYN_CTL_SW_ITR_INDX_M | GLINT_DYN_CTL_INTENA_MSK_M); |
| } |
| |
| /** |
| * ice_misc_intr - misc interrupt handler |
| * @irq: interrupt number |
| * @data: pointer to a q_vector |
| */ |
| static irqreturn_t ice_misc_intr(int __always_unused irq, void *data) |
| { |
| struct ice_pf *pf = (struct ice_pf *)data; |
| struct ice_hw *hw = &pf->hw; |
| irqreturn_t ret = IRQ_NONE; |
| struct device *dev; |
| u32 oicr, ena_mask; |
| |
| dev = ice_pf_to_dev(pf); |
| set_bit(ICE_ADMINQ_EVENT_PENDING, pf->state); |
| set_bit(ICE_MAILBOXQ_EVENT_PENDING, pf->state); |
| set_bit(ICE_SIDEBANDQ_EVENT_PENDING, pf->state); |
| |
| oicr = rd32(hw, PFINT_OICR); |
| ena_mask = rd32(hw, PFINT_OICR_ENA); |
| |
| if (oicr & PFINT_OICR_SWINT_M) { |
| ena_mask &= ~PFINT_OICR_SWINT_M; |
| pf->sw_int_count++; |
| } |
| |
| if (oicr & PFINT_OICR_MAL_DETECT_M) { |
| ena_mask &= ~PFINT_OICR_MAL_DETECT_M; |
| set_bit(ICE_MDD_EVENT_PENDING, pf->state); |
| } |
| if (oicr & PFINT_OICR_VFLR_M) { |
| /* disable any further VFLR event notifications */ |
| if (test_bit(ICE_VF_RESETS_DISABLED, pf->state)) { |
| u32 reg = rd32(hw, PFINT_OICR_ENA); |
| |
| reg &= ~PFINT_OICR_VFLR_M; |
| wr32(hw, PFINT_OICR_ENA, reg); |
| } else { |
| ena_mask &= ~PFINT_OICR_VFLR_M; |
| set_bit(ICE_VFLR_EVENT_PENDING, pf->state); |
| } |
| } |
| |
| if (oicr & PFINT_OICR_GRST_M) { |
| u32 reset; |
| |
| /* we have a reset warning */ |
| ena_mask &= ~PFINT_OICR_GRST_M; |
| reset = (rd32(hw, GLGEN_RSTAT) & GLGEN_RSTAT_RESET_TYPE_M) >> |
| GLGEN_RSTAT_RESET_TYPE_S; |
| |
| if (reset == ICE_RESET_CORER) |
| pf->corer_count++; |
| else if (reset == ICE_RESET_GLOBR) |
| pf->globr_count++; |
| else if (reset == ICE_RESET_EMPR) |
| pf->empr_count++; |
| else |
| dev_dbg(dev, "Invalid reset type %d\n", reset); |
| |
| /* If a reset cycle isn't already in progress, we set a bit in |
| * pf->state so that the service task can start a reset/rebuild. |
| */ |
| if (!test_and_set_bit(ICE_RESET_OICR_RECV, pf->state)) { |
| if (reset == ICE_RESET_CORER) |
| set_bit(ICE_CORER_RECV, pf->state); |
| else if (reset == ICE_RESET_GLOBR) |
| set_bit(ICE_GLOBR_RECV, pf->state); |
| else |
| set_bit(ICE_EMPR_RECV, pf->state); |
| |
| /* There are couple of different bits at play here. |
| * hw->reset_ongoing indicates whether the hardware is |
| * in reset. This is set to true when a reset interrupt |
| * is received and set back to false after the driver |
| * has determined that the hardware is out of reset. |
| * |
| * ICE_RESET_OICR_RECV in pf->state indicates |
| * that a post reset rebuild is required before the |
| * driver is operational again. This is set above. |
| * |
| * As this is the start of the reset/rebuild cycle, set |
| * both to indicate that. |
| */ |
| hw->reset_ongoing = true; |
| } |
| } |
| |
| if (oicr & PFINT_OICR_TSYN_TX_M) { |
| ena_mask &= ~PFINT_OICR_TSYN_TX_M; |
| if (!hw->reset_ongoing) |
| ret = IRQ_WAKE_THREAD; |
| } |
| |
| if (oicr & PFINT_OICR_TSYN_EVNT_M) { |
| u8 tmr_idx = hw->func_caps.ts_func_info.tmr_index_owned; |
| u32 gltsyn_stat = rd32(hw, GLTSYN_STAT(tmr_idx)); |
| |
| /* Save EVENTs from GTSYN register */ |
| pf->ptp.ext_ts_irq |= gltsyn_stat & (GLTSYN_STAT_EVENT0_M | |
| GLTSYN_STAT_EVENT1_M | |
| GLTSYN_STAT_EVENT2_M); |
| ena_mask &= ~PFINT_OICR_TSYN_EVNT_M; |
| kthread_queue_work(pf->ptp.kworker, &pf->ptp.extts_work); |
| } |
| |
| #define ICE_AUX_CRIT_ERR (PFINT_OICR_PE_CRITERR_M | PFINT_OICR_HMC_ERR_M | PFINT_OICR_PE_PUSH_M) |
| if (oicr & ICE_AUX_CRIT_ERR) { |
| pf->oicr_err_reg |= oicr; |
| set_bit(ICE_AUX_ERR_PENDING, pf->state); |
| ena_mask &= ~ICE_AUX_CRIT_ERR; |
| } |
| |
| /* Report any remaining unexpected interrupts */ |
| oicr &= ena_mask; |
| if (oicr) { |
| dev_dbg(dev, "unhandled interrupt oicr=0x%08x\n", oicr); |
| /* If a critical error is pending there is no choice but to |
| * reset the device. |
| */ |
| if (oicr & (PFINT_OICR_PCI_EXCEPTION_M | |
| PFINT_OICR_ECC_ERR_M)) { |
| set_bit(ICE_PFR_REQ, pf->state); |
| ice_service_task_schedule(pf); |
| } |
| } |
| if (!ret) |
| ret = IRQ_HANDLED; |
| |
| ice_service_task_schedule(pf); |
| ice_irq_dynamic_ena(hw, NULL, NULL); |
| |
| return ret; |
| } |
| |
| /** |
| * ice_misc_intr_thread_fn - misc interrupt thread function |
| * @irq: interrupt number |
| * @data: pointer to a q_vector |
| */ |
| static irqreturn_t ice_misc_intr_thread_fn(int __always_unused irq, void *data) |
| { |
| struct ice_pf *pf = data; |
| |
| if (ice_is_reset_in_progress(pf->state)) |
| return IRQ_HANDLED; |
| |
| while (!ice_ptp_process_ts(pf)) |
| usleep_range(50, 100); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * ice_dis_ctrlq_interrupts - disable control queue interrupts |
| * @hw: pointer to HW structure |
| */ |
| static void ice_dis_ctrlq_interrupts(struct ice_hw *hw) |
| { |
| /* disable Admin queue Interrupt causes */ |
| wr32(hw, PFINT_FW_CTL, |
| rd32(hw, PFINT_FW_CTL) & ~PFINT_FW_CTL_CAUSE_ENA_M); |
| |
| /* disable Mailbox queue Interrupt causes */ |
| wr32(hw, PFINT_MBX_CTL, |
| rd32(hw, PFINT_MBX_CTL) & ~PFINT_MBX_CTL_CAUSE_ENA_M); |
| |
| wr32(hw, PFINT_SB_CTL, |
| rd32(hw, PFINT_SB_CTL) & ~PFINT_SB_CTL_CAUSE_ENA_M); |
| |
| /* disable Control queue Interrupt causes */ |
| wr32(hw, PFINT_OICR_CTL, |
| rd32(hw, PFINT_OICR_CTL) & ~PFINT_OICR_CTL_CAUSE_ENA_M); |
| |
| ice_flush(hw); |
| } |
| |
| /** |
| * ice_free_irq_msix_misc - Unroll misc vector setup |
| * @pf: board private structure |
| */ |
| static void ice_free_irq_msix_misc(struct ice_pf *pf) |
| { |
| struct ice_hw *hw = &pf->hw; |
| |
| ice_dis_ctrlq_interrupts(hw); |
| |
| /* disable OICR interrupt */ |
| wr32(hw, PFINT_OICR_ENA, 0); |
| ice_flush(hw); |
| |
| if (pf->msix_entries) { |
| synchronize_irq(pf->msix_entries[pf->oicr_idx].vector); |
| devm_free_irq(ice_pf_to_dev(pf), |
| pf->msix_entries[pf->oicr_idx].vector, pf); |
| } |
| |
| pf->num_avail_sw_msix += 1; |
| ice_free_res(pf->irq_tracker, pf->oicr_idx, ICE_RES_MISC_VEC_ID); |
| } |
| |
| /** |
| * ice_ena_ctrlq_interrupts - enable control queue interrupts |
| * @hw: pointer to HW structure |
| * @reg_idx: HW vector index to associate the control queue interrupts with |
| */ |
| static void ice_ena_ctrlq_interrupts(struct ice_hw *hw, u16 reg_idx) |
| { |
| u32 val; |
| |
| val = ((reg_idx & PFINT_OICR_CTL_MSIX_INDX_M) | |
| PFINT_OICR_CTL_CAUSE_ENA_M); |
| wr32(hw, PFINT_OICR_CTL, val); |
| |
| /* enable Admin queue Interrupt causes */ |
| val = ((reg_idx & PFINT_FW_CTL_MSIX_INDX_M) | |
| PFINT_FW_CTL_CAUSE_ENA_M); |
| wr32(hw, PFINT_FW_CTL, val); |
| |
| /* enable Mailbox queue Interrupt causes */ |
| val = ((reg_idx & PFINT_MBX_CTL_MSIX_INDX_M) | |
| PFINT_MBX_CTL_CAUSE_ENA_M); |
| wr32(hw, PFINT_MBX_CTL, val); |
| |
| /* This enables Sideband queue Interrupt causes */ |
| val = ((reg_idx & PFINT_SB_CTL_MSIX_INDX_M) | |
| PFINT_SB_CTL_CAUSE_ENA_M); |
| wr32(hw, PFINT_SB_CTL, val); |
| |
| ice_flush(hw); |
| } |
| |
| /** |
| * ice_req_irq_msix_misc - Setup the misc vector to handle non queue events |
| * @pf: board private structure |
| * |
| * This sets up the handler for MSIX 0, which is used to manage the |
| * non-queue interrupts, e.g. AdminQ and errors. This is not used |
| * when in MSI or Legacy interrupt mode. |
| */ |
| static int ice_req_irq_msix_misc(struct ice_pf *pf) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| struct ice_hw *hw = &pf->hw; |
| int oicr_idx, err = 0; |
| |
| if (!pf->int_name[0]) |
| snprintf(pf->int_name, sizeof(pf->int_name) - 1, "%s-%s:misc", |
| dev_driver_string(dev), dev_name(dev)); |
| |
| /* Do not request IRQ but do enable OICR interrupt since settings are |
| * lost during reset. Note that this function is called only during |
| * rebuild path and not while reset is in progress. |
| */ |
| if (ice_is_reset_in_progress(pf->state)) |
| goto skip_req_irq; |
| |
| /* reserve one vector in irq_tracker for misc interrupts */ |
| oicr_idx = ice_get_res(pf, pf->irq_tracker, 1, ICE_RES_MISC_VEC_ID); |
| if (oicr_idx < 0) |
| return oicr_idx; |
| |
| pf->num_avail_sw_msix -= 1; |
| pf->oicr_idx = (u16)oicr_idx; |
| |
| err = devm_request_threaded_irq(dev, |
| pf->msix_entries[pf->oicr_idx].vector, |
| ice_misc_intr, ice_misc_intr_thread_fn, |
| 0, pf->int_name, pf); |
| if (err) { |
| dev_err(dev, "devm_request_threaded_irq for %s failed: %d\n", |
| pf->int_name, err); |
| ice_free_res(pf->irq_tracker, 1, ICE_RES_MISC_VEC_ID); |
| pf->num_avail_sw_msix += 1; |
| return err; |
| } |
| |
| skip_req_irq: |
| ice_ena_misc_vector(pf); |
| |
| ice_ena_ctrlq_interrupts(hw, pf->oicr_idx); |
| wr32(hw, GLINT_ITR(ICE_RX_ITR, pf->oicr_idx), |
| ITR_REG_ALIGN(ICE_ITR_8K) >> ICE_ITR_GRAN_S); |
| |
| ice_flush(hw); |
| ice_irq_dynamic_ena(hw, NULL, NULL); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_napi_add - register NAPI handler for the VSI |
| * @vsi: VSI for which NAPI handler is to be registered |
| * |
| * This function is only called in the driver's load path. Registering the NAPI |
| * handler is done in ice_vsi_alloc_q_vector() for all other cases (i.e. resume, |
| * reset/rebuild, etc.) |
| */ |
| static void ice_napi_add(struct ice_vsi *vsi) |
| { |
| int v_idx; |
| |
| if (!vsi->netdev) |
| return; |
| |
| ice_for_each_q_vector(vsi, v_idx) |
| netif_napi_add(vsi->netdev, &vsi->q_vectors[v_idx]->napi, |
| ice_napi_poll); |
| } |
| |
| /** |
| * ice_set_ops - set netdev and ethtools ops for the given netdev |
| * @netdev: netdev instance |
| */ |
| static void ice_set_ops(struct net_device *netdev) |
| { |
| struct ice_pf *pf = ice_netdev_to_pf(netdev); |
| |
| if (ice_is_safe_mode(pf)) { |
| netdev->netdev_ops = &ice_netdev_safe_mode_ops; |
| ice_set_ethtool_safe_mode_ops(netdev); |
| return; |
| } |
| |
| netdev->netdev_ops = &ice_netdev_ops; |
| netdev->udp_tunnel_nic_info = &pf->hw.udp_tunnel_nic; |
| ice_set_ethtool_ops(netdev); |
| } |
| |
| /** |
| * ice_set_netdev_features - set features for the given netdev |
| * @netdev: netdev instance |
| */ |
| static void ice_set_netdev_features(struct net_device *netdev) |
| { |
| struct ice_pf *pf = ice_netdev_to_pf(netdev); |
| bool is_dvm_ena = ice_is_dvm_ena(&pf->hw); |
| netdev_features_t csumo_features; |
| netdev_features_t vlano_features; |
| netdev_features_t dflt_features; |
| netdev_features_t tso_features; |
| |
| if (ice_is_safe_mode(pf)) { |
| /* safe mode */ |
| netdev->features = NETIF_F_SG | NETIF_F_HIGHDMA; |
| netdev->hw_features = netdev->features; |
| return; |
| } |
| |
| dflt_features = NETIF_F_SG | |
| NETIF_F_HIGHDMA | |
| NETIF_F_NTUPLE | |
| NETIF_F_RXHASH; |
| |
| csumo_features = NETIF_F_RXCSUM | |
| NETIF_F_IP_CSUM | |
| NETIF_F_SCTP_CRC | |
| NETIF_F_IPV6_CSUM; |
| |
| vlano_features = NETIF_F_HW_VLAN_CTAG_FILTER | |
| NETIF_F_HW_VLAN_CTAG_TX | |
| NETIF_F_HW_VLAN_CTAG_RX; |
| |
| /* Enable CTAG/STAG filtering by default in Double VLAN Mode (DVM) */ |
| if (is_dvm_ena) |
| vlano_features |= NETIF_F_HW_VLAN_STAG_FILTER; |
| |
| tso_features = NETIF_F_TSO | |
| NETIF_F_TSO_ECN | |
| NETIF_F_TSO6 | |
| NETIF_F_GSO_GRE | |
| NETIF_F_GSO_UDP_TUNNEL | |
| NETIF_F_GSO_GRE_CSUM | |
| NETIF_F_GSO_UDP_TUNNEL_CSUM | |
| NETIF_F_GSO_PARTIAL | |
| NETIF_F_GSO_IPXIP4 | |
| NETIF_F_GSO_IPXIP6 | |
| NETIF_F_GSO_UDP_L4; |
| |
| netdev->gso_partial_features |= NETIF_F_GSO_UDP_TUNNEL_CSUM | |
| NETIF_F_GSO_GRE_CSUM; |
| /* set features that user can change */ |
| netdev->hw_features = dflt_features | csumo_features | |
| vlano_features | tso_features; |
| |
| /* add support for HW_CSUM on packets with MPLS header */ |
| netdev->mpls_features = NETIF_F_HW_CSUM | |
| NETIF_F_TSO | |
| NETIF_F_TSO6; |
| |
| /* enable features */ |
| netdev->features |= netdev->hw_features; |
| |
| netdev->hw_features |= NETIF_F_HW_TC; |
| netdev->hw_features |= NETIF_F_LOOPBACK; |
| |
| /* encap and VLAN devices inherit default, csumo and tso features */ |
| netdev->hw_enc_features |= dflt_features | csumo_features | |
| tso_features; |
| netdev->vlan_features |= dflt_features | csumo_features | |
| tso_features; |
| |
| /* advertise support but don't enable by default since only one type of |
| * VLAN offload can be enabled at a time (i.e. CTAG or STAG). When one |
| * type turns on the other has to be turned off. This is enforced by the |
| * ice_fix_features() ndo callback. |
| */ |
| if (is_dvm_ena) |
| netdev->hw_features |= NETIF_F_HW_VLAN_STAG_RX | |
| NETIF_F_HW_VLAN_STAG_TX; |
| |
| /* Leave CRC / FCS stripping enabled by default, but allow the value to |
| * be changed at runtime |
| */ |
| netdev->hw_features |= NETIF_F_RXFCS; |
| } |
| |
| /** |
| * ice_cfg_netdev - Allocate, configure and register a netdev |
| * @vsi: the VSI associated with the new netdev |
| * |
| * Returns 0 on success, negative value on failure |
| */ |
| static int ice_cfg_netdev(struct ice_vsi *vsi) |
| { |
| struct ice_netdev_priv *np; |
| struct net_device *netdev; |
| u8 mac_addr[ETH_ALEN]; |
| |
| netdev = alloc_etherdev_mqs(sizeof(*np), vsi->alloc_txq, |
| vsi->alloc_rxq); |
| if (!netdev) |
| return -ENOMEM; |
| |
| set_bit(ICE_VSI_NETDEV_ALLOCD, vsi->state); |
| vsi->netdev = netdev; |
| np = netdev_priv(netdev); |
| np->vsi = vsi; |
| |
| ice_set_netdev_features(netdev); |
| |
| ice_set_ops(netdev); |
| |
| if (vsi->type == ICE_VSI_PF) { |
| SET_NETDEV_DEV(netdev, ice_pf_to_dev(vsi->back)); |
| ether_addr_copy(mac_addr, vsi->port_info->mac.perm_addr); |
| eth_hw_addr_set(netdev, mac_addr); |
| ether_addr_copy(netdev->perm_addr, mac_addr); |
| } |
| |
| netdev->priv_flags |= IFF_UNICAST_FLT; |
| |
| /* Setup netdev TC information */ |
| ice_vsi_cfg_netdev_tc(vsi, vsi->tc_cfg.ena_tc); |
| |
| /* setup watchdog timeout value to be 5 second */ |
| netdev->watchdog_timeo = 5 * HZ; |
| |
| netdev->min_mtu = ETH_MIN_MTU; |
| netdev->max_mtu = ICE_MAX_MTU; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_fill_rss_lut - Fill the RSS lookup table with default values |
| * @lut: Lookup table |
| * @rss_table_size: Lookup table size |
| * @rss_size: Range of queue number for hashing |
| */ |
| void ice_fill_rss_lut(u8 *lut, u16 rss_table_size, u16 rss_size) |
| { |
| u16 i; |
| |
| for (i = 0; i < rss_table_size; i++) |
| lut[i] = i % rss_size; |
| } |
| |
| /** |
| * ice_pf_vsi_setup - Set up a PF VSI |
| * @pf: board private structure |
| * @pi: pointer to the port_info instance |
| * |
| * Returns pointer to the successfully allocated VSI software struct |
| * on success, otherwise returns NULL on failure. |
| */ |
| static struct ice_vsi * |
| ice_pf_vsi_setup(struct ice_pf *pf, struct ice_port_info *pi) |
| { |
| return ice_vsi_setup(pf, pi, ICE_VSI_PF, NULL, NULL); |
| } |
| |
| static struct ice_vsi * |
| ice_chnl_vsi_setup(struct ice_pf *pf, struct ice_port_info *pi, |
| struct ice_channel *ch) |
| { |
| return ice_vsi_setup(pf, pi, ICE_VSI_CHNL, NULL, ch); |
| } |
| |
| /** |
| * ice_ctrl_vsi_setup - Set up a control VSI |
| * @pf: board private structure |
| * @pi: pointer to the port_info instance |
| * |
| * Returns pointer to the successfully allocated VSI software struct |
| * on success, otherwise returns NULL on failure. |
| */ |
| static struct ice_vsi * |
| ice_ctrl_vsi_setup(struct ice_pf *pf, struct ice_port_info *pi) |
| { |
| return ice_vsi_setup(pf, pi, ICE_VSI_CTRL, NULL, NULL); |
| } |
| |
| /** |
| * ice_lb_vsi_setup - Set up a loopback VSI |
| * @pf: board private structure |
| * @pi: pointer to the port_info instance |
| * |
| * Returns pointer to the successfully allocated VSI software struct |
| * on success, otherwise returns NULL on failure. |
| */ |
| struct ice_vsi * |
| ice_lb_vsi_setup(struct ice_pf *pf, struct ice_port_info *pi) |
| { |
| return ice_vsi_setup(pf, pi, ICE_VSI_LB, NULL, NULL); |
| } |
| |
| /** |
| * ice_vlan_rx_add_vid - Add a VLAN ID filter to HW offload |
| * @netdev: network interface to be adjusted |
| * @proto: VLAN TPID |
| * @vid: VLAN ID to be added |
| * |
| * net_device_ops implementation for adding VLAN IDs |
| */ |
| static int |
| ice_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi_vlan_ops *vlan_ops; |
| struct ice_vsi *vsi = np->vsi; |
| struct ice_vlan vlan; |
| int ret; |
| |
| /* VLAN 0 is added by default during load/reset */ |
| if (!vid) |
| return 0; |
| |
| while (test_and_set_bit(ICE_CFG_BUSY, vsi->state)) |
| usleep_range(1000, 2000); |
| |
| /* Add multicast promisc rule for the VLAN ID to be added if |
| * all-multicast is currently enabled. |
| */ |
| if (vsi->current_netdev_flags & IFF_ALLMULTI) { |
| ret = ice_fltr_set_vsi_promisc(&vsi->back->hw, vsi->idx, |
| ICE_MCAST_VLAN_PROMISC_BITS, |
| vid); |
| if (ret) |
| goto finish; |
| } |
| |
| vlan_ops = ice_get_compat_vsi_vlan_ops(vsi); |
| |
| /* Add a switch rule for this VLAN ID so its corresponding VLAN tagged |
| * packets aren't pruned by the device's internal switch on Rx |
| */ |
| vlan = ICE_VLAN(be16_to_cpu(proto), vid, 0); |
| ret = vlan_ops->add_vlan(vsi, &vlan); |
| if (ret) |
| goto finish; |
| |
| /* If all-multicast is currently enabled and this VLAN ID is only one |
| * besides VLAN-0 we have to update look-up type of multicast promisc |
| * rule for VLAN-0 from ICE_SW_LKUP_PROMISC to ICE_SW_LKUP_PROMISC_VLAN. |
| */ |
| if ((vsi->current_netdev_flags & IFF_ALLMULTI) && |
| ice_vsi_num_non_zero_vlans(vsi) == 1) { |
| ice_fltr_clear_vsi_promisc(&vsi->back->hw, vsi->idx, |
| ICE_MCAST_PROMISC_BITS, 0); |
| ice_fltr_set_vsi_promisc(&vsi->back->hw, vsi->idx, |
| ICE_MCAST_VLAN_PROMISC_BITS, 0); |
| } |
| |
| finish: |
| clear_bit(ICE_CFG_BUSY, vsi->state); |
| |
| return ret; |
| } |
| |
| /** |
| * ice_vlan_rx_kill_vid - Remove a VLAN ID filter from HW offload |
| * @netdev: network interface to be adjusted |
| * @proto: VLAN TPID |
| * @vid: VLAN ID to be removed |
| * |
| * net_device_ops implementation for removing VLAN IDs |
| */ |
| static int |
| ice_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi_vlan_ops *vlan_ops; |
| struct ice_vsi *vsi = np->vsi; |
| struct ice_vlan vlan; |
| int ret; |
| |
| /* don't allow removal of VLAN 0 */ |
| if (!vid) |
| return 0; |
| |
| while (test_and_set_bit(ICE_CFG_BUSY, vsi->state)) |
| usleep_range(1000, 2000); |
| |
| ret = ice_clear_vsi_promisc(&vsi->back->hw, vsi->idx, |
| ICE_MCAST_VLAN_PROMISC_BITS, vid); |
| if (ret) { |
| netdev_err(netdev, "Error clearing multicast promiscuous mode on VSI %i\n", |
| vsi->vsi_num); |
| vsi->current_netdev_flags |= IFF_ALLMULTI; |
| } |
| |
| vlan_ops = ice_get_compat_vsi_vlan_ops(vsi); |
| |
| /* Make sure VLAN delete is successful before updating VLAN |
| * information |
| */ |
| vlan = ICE_VLAN(be16_to_cpu(proto), vid, 0); |
| ret = vlan_ops->del_vlan(vsi, &vlan); |
| if (ret) |
| goto finish; |
| |
| /* Remove multicast promisc rule for the removed VLAN ID if |
| * all-multicast is enabled. |
| */ |
| if (vsi->current_netdev_flags & IFF_ALLMULTI) |
| ice_fltr_clear_vsi_promisc(&vsi->back->hw, vsi->idx, |
| ICE_MCAST_VLAN_PROMISC_BITS, vid); |
| |
| if (!ice_vsi_has_non_zero_vlans(vsi)) { |
| /* Update look-up type of multicast promisc rule for VLAN 0 |
| * from ICE_SW_LKUP_PROMISC_VLAN to ICE_SW_LKUP_PROMISC when |
| * all-multicast is enabled and VLAN 0 is the only VLAN rule. |
| */ |
| if (vsi->current_netdev_flags & IFF_ALLMULTI) { |
| ice_fltr_clear_vsi_promisc(&vsi->back->hw, vsi->idx, |
| ICE_MCAST_VLAN_PROMISC_BITS, |
| 0); |
| ice_fltr_set_vsi_promisc(&vsi->back->hw, vsi->idx, |
| ICE_MCAST_PROMISC_BITS, 0); |
| } |
| } |
| |
| finish: |
| clear_bit(ICE_CFG_BUSY, vsi->state); |
| |
| return ret; |
| } |
| |
| /** |
| * ice_rep_indr_tc_block_unbind |
| * @cb_priv: indirection block private data |
| */ |
| static void ice_rep_indr_tc_block_unbind(void *cb_priv) |
| { |
| struct ice_indr_block_priv *indr_priv = cb_priv; |
| |
| list_del(&indr_priv->list); |
| kfree(indr_priv); |
| } |
| |
| /** |
| * ice_tc_indir_block_unregister - Unregister TC indirect block notifications |
| * @vsi: VSI struct which has the netdev |
| */ |
| static void ice_tc_indir_block_unregister(struct ice_vsi *vsi) |
| { |
| struct ice_netdev_priv *np = netdev_priv(vsi->netdev); |
| |
| flow_indr_dev_unregister(ice_indr_setup_tc_cb, np, |
| ice_rep_indr_tc_block_unbind); |
| } |
| |
| /** |
| * ice_tc_indir_block_remove - clean indirect TC block notifications |
| * @pf: PF structure |
| */ |
| static void ice_tc_indir_block_remove(struct ice_pf *pf) |
| { |
| struct ice_vsi *pf_vsi = ice_get_main_vsi(pf); |
| |
| if (!pf_vsi) |
| return; |
| |
| ice_tc_indir_block_unregister(pf_vsi); |
| } |
| |
| /** |
| * ice_tc_indir_block_register - Register TC indirect block notifications |
| * @vsi: VSI struct which has the netdev |
| * |
| * Returns 0 on success, negative value on failure |
| */ |
| static int ice_tc_indir_block_register(struct ice_vsi *vsi) |
| { |
| struct ice_netdev_priv *np; |
| |
| if (!vsi || !vsi->netdev) |
| return -EINVAL; |
| |
| np = netdev_priv(vsi->netdev); |
| |
| INIT_LIST_HEAD(&np->tc_indr_block_priv_list); |
| return flow_indr_dev_register(ice_indr_setup_tc_cb, np); |
| } |
| |
| /** |
| * ice_setup_pf_sw - Setup the HW switch on startup or after reset |
| * @pf: board private structure |
| * |
| * Returns 0 on success, negative value on failure |
| */ |
| static int ice_setup_pf_sw(struct ice_pf *pf) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| bool dvm = ice_is_dvm_ena(&pf->hw); |
| struct ice_vsi *vsi; |
| int status; |
| |
| if (ice_is_reset_in_progress(pf->state)) |
| return -EBUSY; |
| |
| status = ice_aq_set_port_params(pf->hw.port_info, dvm, NULL); |
| if (status) |
| return -EIO; |
| |
| vsi = ice_pf_vsi_setup(pf, pf->hw.port_info); |
| if (!vsi) |
| return -ENOMEM; |
| |
| /* init channel list */ |
| INIT_LIST_HEAD(&vsi->ch_list); |
| |
| status = ice_cfg_netdev(vsi); |
| if (status) |
| goto unroll_vsi_setup; |
| /* netdev has to be configured before setting frame size */ |
| ice_vsi_cfg_frame_size(vsi); |
| |
| /* init indirect block notifications */ |
| status = ice_tc_indir_block_register(vsi); |
| if (status) { |
| dev_err(dev, "Failed to register netdev notifier\n"); |
| goto unroll_cfg_netdev; |
| } |
| |
| /* Setup DCB netlink interface */ |
| ice_dcbnl_setup(vsi); |
| |
| /* registering the NAPI handler requires both the queues and |
| * netdev to be created, which are done in ice_pf_vsi_setup() |
| * and ice_cfg_netdev() respectively |
| */ |
| ice_napi_add(vsi); |
| |
| status = ice_init_mac_fltr(pf); |
| if (status) |
| goto unroll_napi_add; |
| |
| return 0; |
| |
| unroll_napi_add: |
| ice_tc_indir_block_unregister(vsi); |
| unroll_cfg_netdev: |
| if (vsi) { |
| ice_napi_del(vsi); |
| if (vsi->netdev) { |
| clear_bit(ICE_VSI_NETDEV_ALLOCD, vsi->state); |
| free_netdev(vsi->netdev); |
| vsi->netdev = NULL; |
| } |
| } |
| |
| unroll_vsi_setup: |
| ice_vsi_release(vsi); |
| return status; |
| } |
| |
| /** |
| * ice_get_avail_q_count - Get count of queues in use |
| * @pf_qmap: bitmap to get queue use count from |
| * @lock: pointer to a mutex that protects access to pf_qmap |
| * @size: size of the bitmap |
| */ |
| static u16 |
| ice_get_avail_q_count(unsigned long *pf_qmap, struct mutex *lock, u16 size) |
| { |
| unsigned long bit; |
| u16 count = 0; |
| |
| mutex_lock(lock); |
| for_each_clear_bit(bit, pf_qmap, size) |
| count++; |
| mutex_unlock(lock); |
| |
| return count; |
| } |
| |
| /** |
| * ice_get_avail_txq_count - Get count of Tx queues in use |
| * @pf: pointer to an ice_pf instance |
| */ |
| u16 ice_get_avail_txq_count(struct ice_pf *pf) |
| { |
| return ice_get_avail_q_count(pf->avail_txqs, &pf->avail_q_mutex, |
| pf->max_pf_txqs); |
| } |
| |
| /** |
| * ice_get_avail_rxq_count - Get count of Rx queues in use |
| * @pf: pointer to an ice_pf instance |
| */ |
| u16 ice_get_avail_rxq_count(struct ice_pf *pf) |
| { |
| return ice_get_avail_q_count(pf->avail_rxqs, &pf->avail_q_mutex, |
| pf->max_pf_rxqs); |
| } |
| |
| /** |
| * ice_deinit_pf - Unrolls initialziations done by ice_init_pf |
| * @pf: board private structure to initialize |
| */ |
| static void ice_deinit_pf(struct ice_pf *pf) |
| { |
| ice_service_task_stop(pf); |
| mutex_destroy(&pf->adev_mutex); |
| mutex_destroy(&pf->sw_mutex); |
| mutex_destroy(&pf->tc_mutex); |
| mutex_destroy(&pf->avail_q_mutex); |
| mutex_destroy(&pf->vfs.table_lock); |
| |
| if (pf->avail_txqs) { |
| bitmap_free(pf->avail_txqs); |
| pf->avail_txqs = NULL; |
| } |
| |
| if (pf->avail_rxqs) { |
| bitmap_free(pf->avail_rxqs); |
| pf->avail_rxqs = NULL; |
| } |
| |
| if (pf->ptp.clock) |
| ptp_clock_unregister(pf->ptp.clock); |
| } |
| |
| /** |
| * ice_set_pf_caps - set PFs capability flags |
| * @pf: pointer to the PF instance |
| */ |
| static void ice_set_pf_caps(struct ice_pf *pf) |
| { |
| struct ice_hw_func_caps *func_caps = &pf->hw.func_caps; |
| |
| clear_bit(ICE_FLAG_RDMA_ENA, pf->flags); |
| if (func_caps->common_cap.rdma) |
| set_bit(ICE_FLAG_RDMA_ENA, pf->flags); |
| clear_bit(ICE_FLAG_DCB_CAPABLE, pf->flags); |
| if (func_caps->common_cap.dcb) |
| set_bit(ICE_FLAG_DCB_CAPABLE, pf->flags); |
| clear_bit(ICE_FLAG_SRIOV_CAPABLE, pf->flags); |
| if (func_caps->common_cap.sr_iov_1_1) { |
| set_bit(ICE_FLAG_SRIOV_CAPABLE, pf->flags); |
| pf->vfs.num_supported = min_t(int, func_caps->num_allocd_vfs, |
| ICE_MAX_SRIOV_VFS); |
| } |
| clear_bit(ICE_FLAG_RSS_ENA, pf->flags); |
| if (func_caps->common_cap.rss_table_size) |
| set_bit(ICE_FLAG_RSS_ENA, pf->flags); |
| |
| clear_bit(ICE_FLAG_FD_ENA, pf->flags); |
| if (func_caps->fd_fltr_guar > 0 || func_caps->fd_fltr_best_effort > 0) { |
| u16 unused; |
| |
| /* ctrl_vsi_idx will be set to a valid value when flow director |
| * is setup by ice_init_fdir |
| */ |
| pf->ctrl_vsi_idx = ICE_NO_VSI; |
| set_bit(ICE_FLAG_FD_ENA, pf->flags); |
| /* force guaranteed filter pool for PF */ |
| ice_alloc_fd_guar_item(&pf->hw, &unused, |
| func_caps->fd_fltr_guar); |
| /* force shared filter pool for PF */ |
| ice_alloc_fd_shrd_item(&pf->hw, &unused, |
| func_caps->fd_fltr_best_effort); |
| } |
| |
| clear_bit(ICE_FLAG_PTP_SUPPORTED, pf->flags); |
| if (func_caps->common_cap.ieee_1588) |
| set_bit(ICE_FLAG_PTP_SUPPORTED, pf->flags); |
| |
| pf->max_pf_txqs = func_caps->common_cap.num_txq; |
| pf->max_pf_rxqs = func_caps->common_cap.num_rxq; |
| } |
| |
| /** |
| * ice_init_pf - Initialize general software structures (struct ice_pf) |
| * @pf: board private structure to initialize |
| */ |
| static int ice_init_pf(struct ice_pf *pf) |
| { |
| ice_set_pf_caps(pf); |
| |
| mutex_init(&pf->sw_mutex); |
| mutex_init(&pf->tc_mutex); |
| mutex_init(&pf->adev_mutex); |
| |
| INIT_HLIST_HEAD(&pf->aq_wait_list); |
| spin_lock_init(&pf->aq_wait_lock); |
| init_waitqueue_head(&pf->aq_wait_queue); |
| |
| init_waitqueue_head(&pf->reset_wait_queue); |
| |
| /* setup service timer and periodic service task */ |
| timer_setup(&pf->serv_tmr, ice_service_timer, 0); |
| pf->serv_tmr_period = HZ; |
| INIT_WORK(&pf->serv_task, ice_service_task); |
| clear_bit(ICE_SERVICE_SCHED, pf->state); |
| |
| mutex_init(&pf->avail_q_mutex); |
| pf->avail_txqs = bitmap_zalloc(pf->max_pf_txqs, GFP_KERNEL); |
| if (!pf->avail_txqs) |
| return -ENOMEM; |
| |
| pf->avail_rxqs = bitmap_zalloc(pf->max_pf_rxqs, GFP_KERNEL); |
| if (!pf->avail_rxqs) { |
| bitmap_free(pf->avail_txqs); |
| pf->avail_txqs = NULL; |
| return -ENOMEM; |
| } |
| |
| mutex_init(&pf->vfs.table_lock); |
| hash_init(pf->vfs.table); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_reduce_msix_usage - Reduce usage of MSI-X vectors |
| * @pf: board private structure |
| * @v_remain: number of remaining MSI-X vectors to be distributed |
| * |
| * Reduce the usage of MSI-X vectors when entire request cannot be fulfilled. |
| * pf->num_lan_msix and pf->num_rdma_msix values are set based on number of |
| * remaining vectors. |
| */ |
| static void ice_reduce_msix_usage(struct ice_pf *pf, int v_remain) |
| { |
| int v_rdma; |
| |
| if (!ice_is_rdma_ena(pf)) { |
| pf->num_lan_msix = v_remain; |
| return; |
| } |
| |
| /* RDMA needs at least 1 interrupt in addition to AEQ MSIX */ |
| v_rdma = ICE_RDMA_NUM_AEQ_MSIX + 1; |
| |
| if (v_remain < ICE_MIN_LAN_TXRX_MSIX + ICE_MIN_RDMA_MSIX) { |
| dev_warn(ice_pf_to_dev(pf), "Not enough MSI-X vectors to support RDMA.\n"); |
| clear_bit(ICE_FLAG_RDMA_ENA, pf->flags); |
| |
| pf->num_rdma_msix = 0; |
| pf->num_lan_msix = ICE_MIN_LAN_TXRX_MSIX; |
| } else if ((v_remain < ICE_MIN_LAN_TXRX_MSIX + v_rdma) || |
| (v_remain - v_rdma < v_rdma)) { |
| /* Support minimum RDMA and give remaining vectors to LAN MSIX */ |
| pf->num_rdma_msix = ICE_MIN_RDMA_MSIX; |
| pf->num_lan_msix = v_remain - ICE_MIN_RDMA_MSIX; |
| } else { |
| /* Split remaining MSIX with RDMA after accounting for AEQ MSIX |
| */ |
| pf->num_rdma_msix = (v_remain - ICE_RDMA_NUM_AEQ_MSIX) / 2 + |
| ICE_RDMA_NUM_AEQ_MSIX; |
| pf->num_lan_msix = v_remain - pf->num_rdma_msix; |
| } |
| } |
| |
| /** |
| * ice_ena_msix_range - Request a range of MSIX vectors from the OS |
| * @pf: board private structure |
| * |
| * Compute the number of MSIX vectors wanted and request from the OS. Adjust |
| * device usage if there are not enough vectors. Return the number of vectors |
| * reserved or negative on failure. |
| */ |
| static int ice_ena_msix_range(struct ice_pf *pf) |
| { |
| int num_cpus, hw_num_msix, v_other, v_wanted, v_actual; |
| struct device *dev = ice_pf_to_dev(pf); |
| int err, i; |
| |
| hw_num_msix = pf->hw.func_caps.common_cap.num_msix_vectors; |
| num_cpus = num_online_cpus(); |
| |
| /* LAN miscellaneous handler */ |
| v_other = ICE_MIN_LAN_OICR_MSIX; |
| |
| /* Flow Director */ |
| if (test_bit(ICE_FLAG_FD_ENA, pf->flags)) |
| v_other += ICE_FDIR_MSIX; |
| |
| /* switchdev */ |
| v_other += ICE_ESWITCH_MSIX; |
| |
| v_wanted = v_other; |
| |
| /* LAN traffic */ |
| pf->num_lan_msix = num_cpus; |
| v_wanted += pf->num_lan_msix; |
| |
| /* RDMA auxiliary driver */ |
| if (ice_is_rdma_ena(pf)) { |
| pf->num_rdma_msix = num_cpus + ICE_RDMA_NUM_AEQ_MSIX; |
| v_wanted += pf->num_rdma_msix; |
| } |
| |
| if (v_wanted > hw_num_msix) { |
| int v_remain; |
| |
| dev_warn(dev, "not enough device MSI-X vectors. wanted = %d, available = %d\n", |
| v_wanted, hw_num_msix); |
| |
| if (hw_num_msix < ICE_MIN_MSIX) { |
| err = -ERANGE; |
| goto exit_err; |
| } |
| |
| v_remain = hw_num_msix - v_other; |
| if (v_remain < ICE_MIN_LAN_TXRX_MSIX) { |
| v_other = ICE_MIN_MSIX - ICE_MIN_LAN_TXRX_MSIX; |
| v_remain = ICE_MIN_LAN_TXRX_MSIX; |
| } |
| |
| ice_reduce_msix_usage(pf, v_remain); |
| v_wanted = pf->num_lan_msix + pf->num_rdma_msix + v_other; |
| |
| dev_notice(dev, "Reducing request to %d MSI-X vectors for LAN traffic.\n", |
| pf->num_lan_msix); |
| if (ice_is_rdma_ena(pf)) |
| dev_notice(dev, "Reducing request to %d MSI-X vectors for RDMA.\n", |
| pf->num_rdma_msix); |
| } |
| |
| pf->msix_entries = devm_kcalloc(dev, v_wanted, |
| sizeof(*pf->msix_entries), GFP_KERNEL); |
| if (!pf->msix_entries) { |
| err = -ENOMEM; |
| goto exit_err; |
| } |
| |
| for (i = 0; i < v_wanted; i++) |
| pf->msix_entries[i].entry = i; |
| |
| /* actually reserve the vectors */ |
| v_actual = pci_enable_msix_range(pf->pdev, pf->msix_entries, |
| ICE_MIN_MSIX, v_wanted); |
| if (v_actual < 0) { |
| dev_err(dev, "unable to reserve MSI-X vectors\n"); |
| err = v_actual; |
| goto msix_err; |
| } |
| |
| if (v_actual < v_wanted) { |
| dev_warn(dev, "not enough OS MSI-X vectors. requested = %d, obtained = %d\n", |
| v_wanted, v_actual); |
| |
| if (v_actual < ICE_MIN_MSIX) { |
| /* error if we can't get minimum vectors */ |
| pci_disable_msix(pf->pdev); |
| err = -ERANGE; |
| goto msix_err; |
| } else { |
| int v_remain = v_actual - v_other; |
| |
| if (v_remain < ICE_MIN_LAN_TXRX_MSIX) |
| v_remain = ICE_MIN_LAN_TXRX_MSIX; |
| |
| ice_reduce_msix_usage(pf, v_remain); |
| |
| dev_notice(dev, "Enabled %d MSI-X vectors for LAN traffic.\n", |
| pf->num_lan_msix); |
| |
| if (ice_is_rdma_ena(pf)) |
| dev_notice(dev, "Enabled %d MSI-X vectors for RDMA.\n", |
| pf->num_rdma_msix); |
| } |
| } |
| |
| return v_actual; |
| |
| msix_err: |
| devm_kfree(dev, pf->msix_entries); |
| |
| exit_err: |
| pf->num_rdma_msix = 0; |
| pf->num_lan_msix = 0; |
| return err; |
| } |
| |
| /** |
| * ice_dis_msix - Disable MSI-X interrupt setup in OS |
| * @pf: board private structure |
| */ |
| static void ice_dis_msix(struct ice_pf *pf) |
| { |
| pci_disable_msix(pf->pdev); |
| devm_kfree(ice_pf_to_dev(pf), pf->msix_entries); |
| pf->msix_entries = NULL; |
| } |
| |
| /** |
| * ice_clear_interrupt_scheme - Undo things done by ice_init_interrupt_scheme |
| * @pf: board private structure |
| */ |
| static void ice_clear_interrupt_scheme(struct ice_pf *pf) |
| { |
| ice_dis_msix(pf); |
| |
| if (pf->irq_tracker) { |
| devm_kfree(ice_pf_to_dev(pf), pf->irq_tracker); |
| pf->irq_tracker = NULL; |
| } |
| } |
| |
| /** |
| * ice_init_interrupt_scheme - Determine proper interrupt scheme |
| * @pf: board private structure to initialize |
| */ |
| static int ice_init_interrupt_scheme(struct ice_pf *pf) |
| { |
| int vectors; |
| |
| vectors = ice_ena_msix_range(pf); |
| |
| if (vectors < 0) |
| return vectors; |
| |
| /* set up vector assignment tracking */ |
| pf->irq_tracker = devm_kzalloc(ice_pf_to_dev(pf), |
| struct_size(pf->irq_tracker, list, vectors), |
| GFP_KERNEL); |
| if (!pf->irq_tracker) { |
| ice_dis_msix(pf); |
| return -ENOMEM; |
| } |
| |
| /* populate SW interrupts pool with number of OS granted IRQs. */ |
| pf->num_avail_sw_msix = (u16)vectors; |
| pf->irq_tracker->num_entries = (u16)vectors; |
| pf->irq_tracker->end = pf->irq_tracker->num_entries; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_is_wol_supported - check if WoL is supported |
| * @hw: pointer to hardware info |
| * |
| * Check if WoL is supported based on the HW configuration. |
| * Returns true if NVM supports and enables WoL for this port, false otherwise |
| */ |
| bool ice_is_wol_supported(struct ice_hw *hw) |
| { |
| u16 wol_ctrl; |
| |
| /* A bit set to 1 in the NVM Software Reserved Word 2 (WoL control |
| * word) indicates WoL is not supported on the corresponding PF ID. |
| */ |
| if (ice_read_sr_word(hw, ICE_SR_NVM_WOL_CFG, &wol_ctrl)) |
| return false; |
| |
| return !(BIT(hw->port_info->lport) & wol_ctrl); |
| } |
| |
| /** |
| * ice_vsi_recfg_qs - Change the number of queues on a VSI |
| * @vsi: VSI being changed |
| * @new_rx: new number of Rx queues |
| * @new_tx: new number of Tx queues |
| * @locked: is adev device_lock held |
| * |
| * Only change the number of queues if new_tx, or new_rx is non-0. |
| * |
| * Returns 0 on success. |
| */ |
| int ice_vsi_recfg_qs(struct ice_vsi *vsi, int new_rx, int new_tx, bool locked) |
| { |
| struct ice_pf *pf = vsi->back; |
| int err = 0, timeout = 50; |
| |
| if (!new_rx && !new_tx) |
| return -EINVAL; |
| |
| while (test_and_set_bit(ICE_CFG_BUSY, pf->state)) { |
| timeout--; |
| if (!timeout) |
| return -EBUSY; |
| usleep_range(1000, 2000); |
| } |
| |
| if (new_tx) |
| vsi->req_txq = (u16)new_tx; |
| if (new_rx) |
| vsi->req_rxq = (u16)new_rx; |
| |
| /* set for the next time the netdev is started */ |
| if (!netif_running(vsi->netdev)) { |
| ice_vsi_rebuild(vsi, false); |
| dev_dbg(ice_pf_to_dev(pf), "Link is down, queue count change happens when link is brought up\n"); |
| goto done; |
| } |
| |
| ice_vsi_close(vsi); |
| ice_vsi_rebuild(vsi, false); |
| ice_pf_dcb_recfg(pf, locked); |
| ice_vsi_open(vsi); |
| done: |
| clear_bit(ICE_CFG_BUSY, pf->state); |
| return err; |
| } |
| |
| /** |
| * ice_set_safe_mode_vlan_cfg - configure PF VSI to allow all VLANs in safe mode |
| * @pf: PF to configure |
| * |
| * No VLAN offloads/filtering are advertised in safe mode so make sure the PF |
| * VSI can still Tx/Rx VLAN tagged packets. |
| */ |
| static void ice_set_safe_mode_vlan_cfg(struct ice_pf *pf) |
| { |
| struct ice_vsi *vsi = ice_get_main_vsi(pf); |
| struct ice_vsi_ctx *ctxt; |
| struct ice_hw *hw; |
| int status; |
| |
| if (!vsi) |
| return; |
| |
| ctxt = kzalloc(sizeof(*ctxt), GFP_KERNEL); |
| if (!ctxt) |
| return; |
| |
| hw = &pf->hw; |
| ctxt->info = vsi->info; |
| |
| ctxt->info.valid_sections = |
| cpu_to_le16(ICE_AQ_VSI_PROP_VLAN_VALID | |
| ICE_AQ_VSI_PROP_SECURITY_VALID | |
| ICE_AQ_VSI_PROP_SW_VALID); |
| |
| /* disable VLAN anti-spoof */ |
| ctxt->info.sec_flags &= ~(ICE_AQ_VSI_SEC_TX_VLAN_PRUNE_ENA << |
| ICE_AQ_VSI_SEC_TX_PRUNE_ENA_S); |
| |
| /* disable VLAN pruning and keep all other settings */ |
| ctxt->info.sw_flags2 &= ~ICE_AQ_VSI_SW_FLAG_RX_VLAN_PRUNE_ENA; |
| |
| /* allow all VLANs on Tx and don't strip on Rx */ |
| ctxt->info.inner_vlan_flags = ICE_AQ_VSI_INNER_VLAN_TX_MODE_ALL | |
| ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING; |
| |
| status = ice_update_vsi(hw, vsi->idx, ctxt, NULL); |
| if (status) { |
| dev_err(ice_pf_to_dev(vsi->back), "Failed to update VSI for safe mode VLANs, err %d aq_err %s\n", |
| status, ice_aq_str(hw->adminq.sq_last_status)); |
| } else { |
| vsi->info.sec_flags = ctxt->info.sec_flags; |
| vsi->info.sw_flags2 = ctxt->info.sw_flags2; |
| vsi->info.inner_vlan_flags = ctxt->info.inner_vlan_flags; |
| } |
| |
| kfree(ctxt); |
| } |
| |
| /** |
| * ice_log_pkg_init - log result of DDP package load |
| * @hw: pointer to hardware info |
| * @state: state of package load |
| */ |
| static void ice_log_pkg_init(struct ice_hw *hw, enum ice_ddp_state state) |
| { |
| struct ice_pf *pf = hw->back; |
| struct device *dev; |
| |
| dev = ice_pf_to_dev(pf); |
| |
| switch (state) { |
| case ICE_DDP_PKG_SUCCESS: |
| dev_info(dev, "The DDP package was successfully loaded: %s version %d.%d.%d.%d\n", |
| hw->active_pkg_name, |
| hw->active_pkg_ver.major, |
| hw->active_pkg_ver.minor, |
| hw->active_pkg_ver.update, |
| hw->active_pkg_ver.draft); |
| break; |
| case ICE_DDP_PKG_SAME_VERSION_ALREADY_LOADED: |
| dev_info(dev, "DDP package already present on device: %s version %d.%d.%d.%d\n", |
| hw->active_pkg_name, |
| hw->active_pkg_ver.major, |
| hw->active_pkg_ver.minor, |
| hw->active_pkg_ver.update, |
| hw->active_pkg_ver.draft); |
| break; |
| case ICE_DDP_PKG_ALREADY_LOADED_NOT_SUPPORTED: |
| dev_err(dev, "The device has a DDP package that is not supported by the driver. The device has package '%s' version %d.%d.x.x. The driver requires version %d.%d.x.x. Entering Safe Mode.\n", |
| hw->active_pkg_name, |
| hw->active_pkg_ver.major, |
| hw->active_pkg_ver.minor, |
| ICE_PKG_SUPP_VER_MAJ, ICE_PKG_SUPP_VER_MNR); |
| break; |
| case ICE_DDP_PKG_COMPATIBLE_ALREADY_LOADED: |
| dev_info(dev, "The driver could not load the DDP package file because a compatible DDP package is already present on the device. The device has package '%s' version %d.%d.%d.%d. The package file found by the driver: '%s' version %d.%d.%d.%d.\n", |
| hw->active_pkg_name, |
| hw->active_pkg_ver.major, |
| hw->active_pkg_ver.minor, |
| hw->active_pkg_ver.update, |
| hw->active_pkg_ver.draft, |
| hw->pkg_name, |
| hw->pkg_ver.major, |
| hw->pkg_ver.minor, |
| hw->pkg_ver.update, |
| hw->pkg_ver.draft); |
| break; |
| case ICE_DDP_PKG_FW_MISMATCH: |
| dev_err(dev, "The firmware loaded on the device is not compatible with the DDP package. Please update the device's NVM. Entering safe mode.\n"); |
| break; |
| case ICE_DDP_PKG_INVALID_FILE: |
| dev_err(dev, "The DDP package file is invalid. Entering Safe Mode.\n"); |
| break; |
| case ICE_DDP_PKG_FILE_VERSION_TOO_HIGH: |
| dev_err(dev, "The DDP package file version is higher than the driver supports. Please use an updated driver. Entering Safe Mode.\n"); |
| break; |
| case ICE_DDP_PKG_FILE_VERSION_TOO_LOW: |
| dev_err(dev, "The DDP package file version is lower than the driver supports. The driver requires version %d.%d.x.x. Please use an updated DDP Package file. Entering Safe Mode.\n", |
| ICE_PKG_SUPP_VER_MAJ, ICE_PKG_SUPP_VER_MNR); |
| break; |
| case ICE_DDP_PKG_FILE_SIGNATURE_INVALID: |
| dev_err(dev, "The DDP package could not be loaded because its signature is not valid. Please use a valid DDP Package. Entering Safe Mode.\n"); |
| break; |
| case ICE_DDP_PKG_FILE_REVISION_TOO_LOW: |
| dev_err(dev, "The DDP Package could not be loaded because its security revision is too low. Please use an updated DDP Package. Entering Safe Mode.\n"); |
| break; |
| case ICE_DDP_PKG_LOAD_ERROR: |
| dev_err(dev, "An error occurred on the device while loading the DDP package. The device will be reset.\n"); |
| /* poll for reset to complete */ |
| if (ice_check_reset(hw)) |
| dev_err(dev, "Error resetting device. Please reload the driver\n"); |
| break; |
| case ICE_DDP_PKG_ERR: |
| default: |
| dev_err(dev, "An unknown error occurred when loading the DDP package. Entering Safe Mode.\n"); |
| break; |
| } |
| } |
| |
| /** |
| * ice_load_pkg - load/reload the DDP Package file |
| * @firmware: firmware structure when firmware requested or NULL for reload |
| * @pf: pointer to the PF instance |
| * |
| * Called on probe and post CORER/GLOBR rebuild to load DDP Package and |
| * initialize HW tables. |
| */ |
| static void |
| ice_load_pkg(const struct firmware *firmware, struct ice_pf *pf) |
| { |
| enum ice_ddp_state state = ICE_DDP_PKG_ERR; |
| struct device *dev = ice_pf_to_dev(pf); |
| struct ice_hw *hw = &pf->hw; |
| |
| /* Load DDP Package */ |
| if (firmware && !hw->pkg_copy) { |
| state = ice_copy_and_init_pkg(hw, firmware->data, |
| firmware->size); |
| ice_log_pkg_init(hw, state); |
| } else if (!firmware && hw->pkg_copy) { |
| /* Reload package during rebuild after CORER/GLOBR reset */ |
| state = ice_init_pkg(hw, hw->pkg_copy, hw->pkg_size); |
| ice_log_pkg_init(hw, state); |
| } else { |
| dev_err(dev, "The DDP package file failed to load. Entering Safe Mode.\n"); |
| } |
| |
| if (!ice_is_init_pkg_successful(state)) { |
| /* Safe Mode */ |
| clear_bit(ICE_FLAG_ADV_FEATURES, pf->flags); |
| return; |
| } |
| |
| /* Successful download package is the precondition for advanced |
| * features, hence setting the ICE_FLAG_ADV_FEATURES flag |
| */ |
| set_bit(ICE_FLAG_ADV_FEATURES, pf->flags); |
| } |
| |
| /** |
| * ice_verify_cacheline_size - verify driver's assumption of 64 Byte cache lines |
| * @pf: pointer to the PF structure |
| * |
| * There is no error returned here because the driver should be able to handle |
| * 128 Byte cache lines, so we only print a warning in case issues are seen, |
| * specifically with Tx. |
| */ |
| static void ice_verify_cacheline_size(struct ice_pf *pf) |
| { |
| if (rd32(&pf->hw, GLPCI_CNF2) & GLPCI_CNF2_CACHELINE_SIZE_M) |
| dev_warn(ice_pf_to_dev(pf), "%d Byte cache line assumption is invalid, driver may have Tx timeouts!\n", |
| ICE_CACHE_LINE_BYTES); |
| } |
| |
| /** |
| * ice_send_version - update firmware with driver version |
| * @pf: PF struct |
| * |
| * Returns 0 on success, else error code |
| */ |
| static int ice_send_version(struct ice_pf *pf) |
| { |
| struct ice_driver_ver dv; |
| |
| dv.major_ver = 0xff; |
| dv.minor_ver = 0xff; |
| dv.build_ver = 0xff; |
| dv.subbuild_ver = 0; |
| strscpy((char *)dv.driver_string, UTS_RELEASE, |
| sizeof(dv.driver_string)); |
| return ice_aq_send_driver_ver(&pf->hw, &dv, NULL); |
| } |
| |
| /** |
| * ice_init_fdir - Initialize flow director VSI and configuration |
| * @pf: pointer to the PF instance |
| * |
| * returns 0 on success, negative on error |
| */ |
| static int ice_init_fdir(struct ice_pf *pf) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| struct ice_vsi *ctrl_vsi; |
| int err; |
| |
| /* Side Band Flow Director needs to have a control VSI. |
| * Allocate it and store it in the PF. |
| */ |
| ctrl_vsi = ice_ctrl_vsi_setup(pf, pf->hw.port_info); |
| if (!ctrl_vsi) { |
| dev_dbg(dev, "could not create control VSI\n"); |
| return -ENOMEM; |
| } |
| |
| err = ice_vsi_open_ctrl(ctrl_vsi); |
| if (err) { |
| dev_dbg(dev, "could not open control VSI\n"); |
| goto err_vsi_open; |
| } |
| |
| mutex_init(&pf->hw.fdir_fltr_lock); |
| |
| err = ice_fdir_create_dflt_rules(pf); |
| if (err) |
| goto err_fdir_rule; |
| |
| return 0; |
| |
| err_fdir_rule: |
| ice_fdir_release_flows(&pf->hw); |
| ice_vsi_close(ctrl_vsi); |
| err_vsi_open: |
| ice_vsi_release(ctrl_vsi); |
| if (pf->ctrl_vsi_idx != ICE_NO_VSI) { |
| pf->vsi[pf->ctrl_vsi_idx] = NULL; |
| pf->ctrl_vsi_idx = ICE_NO_VSI; |
| } |
| return err; |
| } |
| |
| /** |
| * ice_get_opt_fw_name - return optional firmware file name or NULL |
| * @pf: pointer to the PF instance |
| */ |
| static char *ice_get_opt_fw_name(struct ice_pf *pf) |
| { |
| /* Optional firmware name same as default with additional dash |
| * followed by a EUI-64 identifier (PCIe Device Serial Number) |
| */ |
| struct pci_dev *pdev = pf->pdev; |
| char *opt_fw_filename; |
| u64 dsn; |
| |
| /* Determine the name of the optional file using the DSN (two |
| * dwords following the start of the DSN Capability). |
| */ |
| dsn = pci_get_dsn(pdev); |
| if (!dsn) |
| return NULL; |
| |
| opt_fw_filename = kzalloc(NAME_MAX, GFP_KERNEL); |
| if (!opt_fw_filename) |
| return NULL; |
| |
| snprintf(opt_fw_filename, NAME_MAX, "%sice-%016llx.pkg", |
| ICE_DDP_PKG_PATH, dsn); |
| |
| return opt_fw_filename; |
| } |
| |
| /** |
| * ice_request_fw - Device initialization routine |
| * @pf: pointer to the PF instance |
| */ |
| static void ice_request_fw(struct ice_pf *pf) |
| { |
| char *opt_fw_filename = ice_get_opt_fw_name(pf); |
| const struct firmware *firmware = NULL; |
| struct device *dev = ice_pf_to_dev(pf); |
| int err = 0; |
| |
| /* optional device-specific DDP (if present) overrides the default DDP |
| * package file. kernel logs a debug message if the file doesn't exist, |
| * and warning messages for other errors. |
| */ |
| if (opt_fw_filename) { |
| err = firmware_request_nowarn(&firmware, opt_fw_filename, dev); |
| if (err) { |
| kfree(opt_fw_filename); |
| goto dflt_pkg_load; |
| } |
| |
| /* request for firmware was successful. Download to device */ |
| ice_load_pkg(firmware, pf); |
| kfree(opt_fw_filename); |
| release_firmware(firmware); |
| return; |
| } |
| |
| dflt_pkg_load: |
| err = request_firmware(&firmware, ICE_DDP_PKG_FILE, dev); |
| if (err) { |
| dev_err(dev, "The DDP package file was not found or could not be read. Entering Safe Mode\n"); |
| return; |
| } |
| |
| /* request for firmware was successful. Download to device */ |
| ice_load_pkg(firmware, pf); |
| release_firmware(firmware); |
| } |
| |
| /** |
| * ice_print_wake_reason - show the wake up cause in the log |
| * @pf: pointer to the PF struct |
| */ |
| static void ice_print_wake_reason(struct ice_pf *pf) |
| { |
| u32 wus = pf->wakeup_reason; |
| const char *wake_str; |
| |
| /* if no wake event, nothing to print */ |
| if (!wus) |
| return; |
| |
| if (wus & PFPM_WUS_LNKC_M) |
| wake_str = "Link\n"; |
| else if (wus & PFPM_WUS_MAG_M) |
| wake_str = "Magic Packet\n"; |
| else if (wus & PFPM_WUS_MNG_M) |
| wake_str = "Management\n"; |
| else if (wus & PFPM_WUS_FW_RST_WK_M) |
| wake_str = "Firmware Reset\n"; |
| else |
| wake_str = "Unknown\n"; |
| |
| dev_info(ice_pf_to_dev(pf), "Wake reason: %s", wake_str); |
| } |
| |
| /** |
| * ice_register_netdev - register netdev |
| * @pf: pointer to the PF struct |
| */ |
| static int ice_register_netdev(struct ice_pf *pf) |
| { |
| struct ice_vsi *vsi; |
| int err = 0; |
| |
| vsi = ice_get_main_vsi(pf); |
| if (!vsi || !vsi->netdev) |
| return -EIO; |
| |
| err = register_netdev(vsi->netdev); |
| if (err) |
| goto err_register_netdev; |
| |
| set_bit(ICE_VSI_NETDEV_REGISTERED, vsi->state); |
| netif_carrier_off(vsi->netdev); |
| netif_tx_stop_all_queues(vsi->netdev); |
| |
| return 0; |
| err_register_netdev: |
| free_netdev(vsi->netdev); |
| vsi->netdev = NULL; |
| clear_bit(ICE_VSI_NETDEV_ALLOCD, vsi->state); |
| return err; |
| } |
| |
| /** |
| * ice_probe - Device initialization routine |
| * @pdev: PCI device information struct |
| * @ent: entry in ice_pci_tbl |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int |
| ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent) |
| { |
| struct device *dev = &pdev->dev; |
| struct ice_vsi *vsi; |
| struct ice_pf *pf; |
| struct ice_hw *hw; |
| int i, err; |
| |
| if (pdev->is_virtfn) { |
| dev_err(dev, "can't probe a virtual function\n"); |
| return -EINVAL; |
| } |
| |
| /* this driver uses devres, see |
| * Documentation/driver-api/driver-model/devres.rst |
| */ |
| err = pcim_enable_device(pdev); |
| if (err) |
| return err; |
| |
| err = pcim_iomap_regions(pdev, BIT(ICE_BAR0), dev_driver_string(dev)); |
| if (err) { |
| dev_err(dev, "BAR0 I/O map error %d\n", err); |
| return err; |
| } |
| |
| pf = ice_allocate_pf(dev); |
| if (!pf) |
| return -ENOMEM; |
| |
| /* initialize Auxiliary index to invalid value */ |
| pf->aux_idx = -1; |
| |
| /* set up for high or low DMA */ |
| err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)); |
| if (err) { |
| dev_err(dev, "DMA configuration failed: 0x%x\n", err); |
| return err; |
| } |
| |
| pci_enable_pcie_error_reporting(pdev); |
| pci_set_master(pdev); |
| |
| pf->pdev = pdev; |
| pci_set_drvdata(pdev, pf); |
| set_bit(ICE_DOWN, pf->state); |
| /* Disable service task until DOWN bit is cleared */ |
| set_bit(ICE_SERVICE_DIS, pf->state); |
| |
| hw = &pf->hw; |
| hw->hw_addr = pcim_iomap_table(pdev)[ICE_BAR0]; |
| pci_save_state(pdev); |
| |
| hw->back = pf; |
| hw->vendor_id = pdev->vendor; |
| hw->device_id = pdev->device; |
| pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id); |
| hw->subsystem_vendor_id = pdev->subsystem_vendor; |
| hw->subsystem_device_id = pdev->subsystem_device; |
| hw->bus.device = PCI_SLOT(pdev->devfn); |
| hw->bus.func = PCI_FUNC(pdev->devfn); |
| ice_set_ctrlq_len(hw); |
| |
| pf->msg_enable = netif_msg_init(debug, ICE_DFLT_NETIF_M); |
| |
| #ifndef CONFIG_DYNAMIC_DEBUG |
| if (debug < -1) |
| hw->debug_mask = debug; |
| #endif |
| |
| err = ice_init_hw(hw); |
| if (err) { |
| dev_err(dev, "ice_init_hw failed: %d\n", err); |
| err = -EIO; |
| goto err_exit_unroll; |
| } |
| |
| ice_init_feature_support(pf); |
| |
| ice_request_fw(pf); |
| |
| /* if ice_request_fw fails, ICE_FLAG_ADV_FEATURES bit won't be |
| * set in pf->state, which will cause ice_is_safe_mode to return |
| * true |
| */ |
| if (ice_is_safe_mode(pf)) { |
| /* we already got function/device capabilities but these don't |
| * reflect what the driver needs to do in safe mode. Instead of |
| * adding conditional logic everywhere to ignore these |
| * device/function capabilities, override them. |
| */ |
| ice_set_safe_mode_caps(hw); |
| } |
| |
| err = ice_init_pf(pf); |
| if (err) { |
| dev_err(dev, "ice_init_pf failed: %d\n", err); |
| goto err_init_pf_unroll; |
| } |
| |
| ice_devlink_init_regions(pf); |
| |
| pf->hw.udp_tunnel_nic.set_port = ice_udp_tunnel_set_port; |
| pf->hw.udp_tunnel_nic.unset_port = ice_udp_tunnel_unset_port; |
| pf->hw.udp_tunnel_nic.flags = UDP_TUNNEL_NIC_INFO_MAY_SLEEP; |
| pf->hw.udp_tunnel_nic.shared = &pf->hw.udp_tunnel_shared; |
| i = 0; |
| if (pf->hw.tnl.valid_count[TNL_VXLAN]) { |
| pf->hw.udp_tunnel_nic.tables[i].n_entries = |
| pf->hw.tnl.valid_count[TNL_VXLAN]; |
| pf->hw.udp_tunnel_nic.tables[i].tunnel_types = |
| UDP_TUNNEL_TYPE_VXLAN; |
| i++; |
| } |
| if (pf->hw.tnl.valid_count[TNL_GENEVE]) { |
| pf->hw.udp_tunnel_nic.tables[i].n_entries = |
| pf->hw.tnl.valid_count[TNL_GENEVE]; |
| pf->hw.udp_tunnel_nic.tables[i].tunnel_types = |
| UDP_TUNNEL_TYPE_GENEVE; |
| i++; |
| } |
| |
| pf->num_alloc_vsi = hw->func_caps.guar_num_vsi; |
| if (!pf->num_alloc_vsi) { |
| err = -EIO; |
| goto err_init_pf_unroll; |
| } |
| if (pf->num_alloc_vsi > UDP_TUNNEL_NIC_MAX_SHARING_DEVICES) { |
| dev_warn(&pf->pdev->dev, |
| "limiting the VSI count due to UDP tunnel limitation %d > %d\n", |
| pf->num_alloc_vsi, UDP_TUNNEL_NIC_MAX_SHARING_DEVICES); |
| pf->num_alloc_vsi = UDP_TUNNEL_NIC_MAX_SHARING_DEVICES; |
| } |
| |
| pf->vsi = devm_kcalloc(dev, pf->num_alloc_vsi, sizeof(*pf->vsi), |
| GFP_KERNEL); |
| if (!pf->vsi) { |
| err = -ENOMEM; |
| goto err_init_pf_unroll; |
| } |
| |
| pf->vsi_stats = devm_kcalloc(dev, pf->num_alloc_vsi, |
| sizeof(*pf->vsi_stats), GFP_KERNEL); |
| if (!pf->vsi_stats) { |
| err = -ENOMEM; |
| goto err_init_vsi_unroll; |
| } |
| |
| err = ice_init_interrupt_scheme(pf); |
| if (err) { |
| dev_err(dev, "ice_init_interrupt_scheme failed: %d\n", err); |
| err = -EIO; |
| goto err_init_vsi_stats_unroll; |
| } |
| |
| /* In case of MSIX we are going to setup the misc vector right here |
| * to handle admin queue events etc. In case of legacy and MSI |
| * the misc functionality and queue processing is combined in |
| * the same vector and that gets setup at open. |
| */ |
| err = ice_req_irq_msix_misc(pf); |
| if (err) { |
| dev_err(dev, "setup of misc vector failed: %d\n", err); |
| goto err_init_interrupt_unroll; |
| } |
| |
| /* create switch struct for the switch element created by FW on boot */ |
| pf->first_sw = devm_kzalloc(dev, sizeof(*pf->first_sw), GFP_KERNEL); |
| if (!pf->first_sw) { |
| err = -ENOMEM; |
| goto err_msix_misc_unroll; |
| } |
| |
| if (hw->evb_veb) |
| pf->first_sw->bridge_mode = BRIDGE_MODE_VEB; |
| else |
| pf->first_sw->bridge_mode = BRIDGE_MODE_VEPA; |
| |
| pf->first_sw->pf = pf; |
| |
| /* record the sw_id available for later use */ |
| pf->first_sw->sw_id = hw->port_info->sw_id; |
| |
| err = ice_setup_pf_sw(pf); |
| if (err) { |
| dev_err(dev, "probe failed due to setup PF switch: %d\n", err); |
| goto err_alloc_sw_unroll; |
| } |
| |
| clear_bit(ICE_SERVICE_DIS, pf->state); |
| |
| /* tell the firmware we are up */ |
| err = ice_send_version(pf); |
| if (err) { |
| dev_err(dev, "probe failed sending driver version %s. error: %d\n", |
| UTS_RELEASE, err); |
| goto err_send_version_unroll; |
| } |
| |
| /* since everything is good, start the service timer */ |
| mod_timer(&pf->serv_tmr, round_jiffies(jiffies + pf->serv_tmr_period)); |
| |
| err = ice_init_link_events(pf->hw.port_info); |
| if (err) { |
| dev_err(dev, "ice_init_link_events failed: %d\n", err); |
| goto err_send_version_unroll; |
| } |
| |
| /* not a fatal error if this fails */ |
| err = ice_init_nvm_phy_type(pf->hw.port_info); |
| if (err) |
| dev_err(dev, "ice_init_nvm_phy_type failed: %d\n", err); |
| |
| /* not a fatal error if this fails */ |
| err = ice_update_link_info(pf->hw.port_info); |
| if (err) |
| dev_err(dev, "ice_update_link_info failed: %d\n", err); |
| |
| ice_init_link_dflt_override(pf->hw.port_info); |
| |
| ice_check_link_cfg_err(pf, |
| pf->hw.port_info->phy.link_info.link_cfg_err); |
| |
| /* if media available, initialize PHY settings */ |
| if (pf->hw.port_info->phy.link_info.link_info & |
| ICE_AQ_MEDIA_AVAILABLE) { |
| /* not a fatal error if this fails */ |
| err = ice_init_phy_user_cfg(pf->hw.port_info); |
| if (err) |
| dev_err(dev, "ice_init_phy_user_cfg failed: %d\n", err); |
| |
| if (!test_bit(ICE_FLAG_LINK_DOWN_ON_CLOSE_ENA, pf->flags)) { |
| struct ice_vsi *vsi = ice_get_main_vsi(pf); |
| |
| if (vsi) |
| ice_configure_phy(vsi); |
| } |
| } else { |
| set_bit(ICE_FLAG_NO_MEDIA, pf->flags); |
| } |
| |
| ice_verify_cacheline_size(pf); |
| |
| /* Save wakeup reason register for later use */ |
| pf->wakeup_reason = rd32(hw, PFPM_WUS); |
| |
| /* check for a power management event */ |
| ice_print_wake_reason(pf); |
| |
| /* clear wake status, all bits */ |
| wr32(hw, PFPM_WUS, U32_MAX); |
| |
| /* Disable WoL at init, wait for user to enable */ |
| device_set_wakeup_enable(dev, false); |
| |
| if (ice_is_safe_mode(pf)) { |
| ice_set_safe_mode_vlan_cfg(pf); |
| goto probe_done; |
| } |
| |
| /* initialize DDP driven features */ |
| if (test_bit(ICE_FLAG_PTP_SUPPORTED, pf->flags)) |
| ice_ptp_init(pf); |
| |
| if (ice_is_feature_supported(pf, ICE_F_GNSS)) |
| ice_gnss_init(pf); |
| |
| /* Note: Flow director init failure is non-fatal to load */ |
| if (ice_init_fdir(pf)) |
| dev_err(dev, "could not initialize flow director\n"); |
| |
| /* Note: DCB init failure is non-fatal to load */ |
| if (ice_init_pf_dcb(pf, false)) { |
| clear_bit(ICE_FLAG_DCB_CAPABLE, pf->flags); |
| clear_bit(ICE_FLAG_DCB_ENA, pf->flags); |
| } else { |
| ice_cfg_lldp_mib_change(&pf->hw, true); |
| } |
| |
| if (ice_init_lag(pf)) |
| dev_warn(dev, "Failed to init link aggregation support\n"); |
| |
| /* print PCI link speed and width */ |
| pcie_print_link_status(pf->pdev); |
| |
| probe_done: |
| err = ice_devlink_create_pf_port(pf); |
| if (err) |
| goto err_create_pf_port; |
| |
| vsi = ice_get_main_vsi(pf); |
| if (!vsi || !vsi->netdev) { |
| err = -EINVAL; |
| goto err_netdev_reg; |
| } |
| |
| SET_NETDEV_DEVLINK_PORT(vsi->netdev, &pf->devlink_port); |
| |
| err = ice_register_netdev(pf); |
| if (err) |
| goto err_netdev_reg; |
| |
| err = ice_devlink_register_params(pf); |
| if (err) |
| goto err_netdev_reg; |
| |
| /* ready to go, so clear down state bit */ |
| clear_bit(ICE_DOWN, pf->state); |
| if (ice_is_rdma_ena(pf)) { |
| pf->aux_idx = ida_alloc(&ice_aux_ida, GFP_KERNEL); |
| if (pf->aux_idx < 0) { |
| dev_err(dev, "Failed to allocate device ID for AUX driver\n"); |
| err = -ENOMEM; |
| goto err_devlink_reg_param; |
| } |
| |
| err = ice_init_rdma(pf); |
| if (err) { |
| dev_err(dev, "Failed to initialize RDMA: %d\n", err); |
| err = -EIO; |
| goto err_init_aux_unroll; |
| } |
| } else { |
| dev_warn(dev, "RDMA is not supported on this device\n"); |
| } |
| |
| ice_devlink_register(pf); |
| return 0; |
| |
| err_init_aux_unroll: |
| pf->adev = NULL; |
| ida_free(&ice_aux_ida, pf->aux_idx); |
| err_devlink_reg_param: |
| ice_devlink_unregister_params(pf); |
| err_netdev_reg: |
| ice_devlink_destroy_pf_port(pf); |
| err_create_pf_port: |
| err_send_version_unroll: |
| ice_vsi_release_all(pf); |
| err_alloc_sw_unroll: |
| set_bit(ICE_SERVICE_DIS, pf->state); |
| set_bit(ICE_DOWN, pf->state); |
| devm_kfree(dev, pf->first_sw); |
| err_msix_misc_unroll: |
| ice_free_irq_msix_misc(pf); |
| err_init_interrupt_unroll: |
| ice_clear_interrupt_scheme(pf); |
| err_init_vsi_stats_unroll: |
| devm_kfree(dev, pf->vsi_stats); |
| pf->vsi_stats = NULL; |
| err_init_vsi_unroll: |
| devm_kfree(dev, pf->vsi); |
| err_init_pf_unroll: |
| ice_deinit_pf(pf); |
| ice_devlink_destroy_regions(pf); |
| ice_deinit_hw(hw); |
| err_exit_unroll: |
| pci_disable_pcie_error_reporting(pdev); |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| /** |
| * ice_set_wake - enable or disable Wake on LAN |
| * @pf: pointer to the PF struct |
| * |
| * Simple helper for WoL control |
| */ |
| static void ice_set_wake(struct ice_pf *pf) |
| { |
| struct ice_hw *hw = &pf->hw; |
| bool wol = pf->wol_ena; |
| |
| /* clear wake state, otherwise new wake events won't fire */ |
| wr32(hw, PFPM_WUS, U32_MAX); |
| |
| /* enable / disable APM wake up, no RMW needed */ |
| wr32(hw, PFPM_APM, wol ? PFPM_APM_APME_M : 0); |
| |
| /* set magic packet filter enabled */ |
| wr32(hw, PFPM_WUFC, wol ? PFPM_WUFC_MAG_M : 0); |
| } |
| |
| /** |
| * ice_setup_mc_magic_wake - setup device to wake on multicast magic packet |
| * @pf: pointer to the PF struct |
| * |
| * Issue firmware command to enable multicast magic wake, making |
| * sure that any locally administered address (LAA) is used for |
| * wake, and that PF reset doesn't undo the LAA. |
| */ |
| static void ice_setup_mc_magic_wake(struct ice_pf *pf) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| struct ice_hw *hw = &pf->hw; |
| u8 mac_addr[ETH_ALEN]; |
| struct ice_vsi *vsi; |
| int status; |
| u8 flags; |
| |
| if (!pf->wol_ena) |
| return; |
| |
| vsi = ice_get_main_vsi(pf); |
| if (!vsi) |
| return; |
| |
| /* Get current MAC address in case it's an LAA */ |
| if (vsi->netdev) |
| ether_addr_copy(mac_addr, vsi->netdev->dev_addr); |
| else |
| ether_addr_copy(mac_addr, vsi->port_info->mac.perm_addr); |
| |
| flags = ICE_AQC_MAN_MAC_WR_MC_MAG_EN | |
| ICE_AQC_MAN_MAC_UPDATE_LAA_WOL | |
| ICE_AQC_MAN_MAC_WR_WOL_LAA_PFR_KEEP; |
| |
| status = ice_aq_manage_mac_write(hw, mac_addr, flags, NULL); |
| if (status) |
| dev_err(dev, "Failed to enable Multicast Magic Packet wake, err %d aq_err %s\n", |
| status, ice_aq_str(hw->adminq.sq_last_status)); |
| } |
| |
| /** |
| * ice_remove - Device removal routine |
| * @pdev: PCI device information struct |
| */ |
| static void ice_remove(struct pci_dev *pdev) |
| { |
| struct ice_pf *pf = pci_get_drvdata(pdev); |
| int i; |
| |
| ice_devlink_unregister(pf); |
| for (i = 0; i < ICE_MAX_RESET_WAIT; i++) { |
| if (!ice_is_reset_in_progress(pf->state)) |
| break; |
| msleep(100); |
| } |
| |
| ice_tc_indir_block_remove(pf); |
| |
| if (test_bit(ICE_FLAG_SRIOV_ENA, pf->flags)) { |
| set_bit(ICE_VF_RESETS_DISABLED, pf->state); |
| ice_free_vfs(pf); |
| } |
| |
| ice_service_task_stop(pf); |
| |
| ice_aq_cancel_waiting_tasks(pf); |
| ice_unplug_aux_dev(pf); |
| if (pf->aux_idx >= 0) |
| ida_free(&ice_aux_ida, pf->aux_idx); |
| ice_devlink_unregister_params(pf); |
| set_bit(ICE_DOWN, pf->state); |
| |
| ice_deinit_lag(pf); |
| if (test_bit(ICE_FLAG_PTP_SUPPORTED, pf->flags)) |
| ice_ptp_release(pf); |
| if (ice_is_feature_supported(pf, ICE_F_GNSS)) |
| ice_gnss_exit(pf); |
| if (!ice_is_safe_mode(pf)) |
| ice_remove_arfs(pf); |
| ice_setup_mc_magic_wake(pf); |
| ice_vsi_release_all(pf); |
| mutex_destroy(&(&pf->hw)->fdir_fltr_lock); |
| ice_devlink_destroy_pf_port(pf); |
| ice_set_wake(pf); |
| ice_free_irq_msix_misc(pf); |
| ice_for_each_vsi(pf, i) { |
| if (!pf->vsi[i]) |
| continue; |
| ice_vsi_free_q_vectors(pf->vsi[i]); |
| } |
| devm_kfree(&pdev->dev, pf->vsi_stats); |
| pf->vsi_stats = NULL; |
| ice_deinit_pf(pf); |
| ice_devlink_destroy_regions(pf); |
| ice_deinit_hw(&pf->hw); |
| |
| /* Issue a PFR as part of the prescribed driver unload flow. Do not |
| * do it via ice_schedule_reset() since there is no need to rebuild |
| * and the service task is already stopped. |
| */ |
| ice_reset(&pf->hw, ICE_RESET_PFR); |
| pci_wait_for_pending_transaction(pdev); |
| ice_clear_interrupt_scheme(pf); |
| pci_disable_pcie_error_reporting(pdev); |
| pci_disable_device(pdev); |
| } |
| |
| /** |
| * ice_shutdown - PCI callback for shutting down device |
| * @pdev: PCI device information struct |
| */ |
| static void ice_shutdown(struct pci_dev *pdev) |
| { |
| struct ice_pf *pf = pci_get_drvdata(pdev); |
| |
| ice_remove(pdev); |
| |
| if (system_state == SYSTEM_POWER_OFF) { |
| pci_wake_from_d3(pdev, pf->wol_ena); |
| pci_set_power_state(pdev, PCI_D3hot); |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| /** |
| * ice_prepare_for_shutdown - prep for PCI shutdown |
| * @pf: board private structure |
| * |
| * Inform or close all dependent features in prep for PCI device shutdown |
| */ |
| static void ice_prepare_for_shutdown(struct ice_pf *pf) |
| { |
| struct ice_hw *hw = &pf->hw; |
| u32 v; |
| |
| /* Notify VFs of impending reset */ |
| if (ice_check_sq_alive(hw, &hw->mailboxq)) |
| ice_vc_notify_reset(pf); |
| |
| dev_dbg(ice_pf_to_dev(pf), "Tearing down internal switch for shutdown\n"); |
| |
| /* disable the VSIs and their queues that are not already DOWN */ |
| ice_pf_dis_all_vsi(pf, false); |
| |
| ice_for_each_vsi(pf, v) |
| if (pf->vsi[v]) |
| pf->vsi[v]->vsi_num = 0; |
| |
| ice_shutdown_all_ctrlq(hw); |
| } |
| |
| /** |
| * ice_reinit_interrupt_scheme - Reinitialize interrupt scheme |
| * @pf: board private structure to reinitialize |
| * |
| * This routine reinitialize interrupt scheme that was cleared during |
| * power management suspend callback. |
| * |
| * This should be called during resume routine to re-allocate the q_vectors |
| * and reacquire interrupts. |
| */ |
| static int ice_reinit_interrupt_scheme(struct ice_pf *pf) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| int ret, v; |
| |
| /* Since we clear MSIX flag during suspend, we need to |
| * set it back during resume... |
| */ |
| |
| ret = ice_init_interrupt_scheme(pf); |
| if (ret) { |
| dev_err(dev, "Failed to re-initialize interrupt %d\n", ret); |
| return ret; |
| } |
| |
| /* Remap vectors and rings, after successful re-init interrupts */ |
| ice_for_each_vsi(pf, v) { |
| if (!pf->vsi[v]) |
| continue; |
| |
| ret = ice_vsi_alloc_q_vectors(pf->vsi[v]); |
| if (ret) |
| goto err_reinit; |
| ice_vsi_map_rings_to_vectors(pf->vsi[v]); |
| } |
| |
| ret = ice_req_irq_msix_misc(pf); |
| if (ret) { |
| dev_err(dev, "Setting up misc vector failed after device suspend %d\n", |
| ret); |
| goto err_reinit; |
| } |
| |
| return 0; |
| |
| err_reinit: |
| while (v--) |
| if (pf->vsi[v]) |
| ice_vsi_free_q_vectors(pf->vsi[v]); |
| |
| return ret; |
| } |
| |
| /** |
| * ice_suspend |
| * @dev: generic device information structure |
| * |
| * Power Management callback to quiesce the device and prepare |
| * for D3 transition. |
| */ |
| static int __maybe_unused ice_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct ice_pf *pf; |
| int disabled, v; |
| |
| pf = pci_get_drvdata(pdev); |
| |
| if (!ice_pf_state_is_nominal(pf)) { |
| dev_err(dev, "Device is not ready, no need to suspend it\n"); |
| return -EBUSY; |
| } |
| |
| /* Stop watchdog tasks until resume completion. |
| * Even though it is most likely that the service task is |
| * disabled if the device is suspended or down, the service task's |
| * state is controlled by a different state bit, and we should |
| * store and honor whatever state that bit is in at this point. |
| */ |
| disabled = ice_service_task_stop(pf); |
| |
| ice_unplug_aux_dev(pf); |
| |
| /* Already suspended?, then there is nothing to do */ |
| if (test_and_set_bit(ICE_SUSPENDED, pf->state)) { |
| if (!disabled) |
| ice_service_task_restart(pf); |
| return 0; |
| } |
| |
| if (test_bit(ICE_DOWN, pf->state) || |
| ice_is_reset_in_progress(pf->state)) { |
| dev_err(dev, "can't suspend device in reset or already down\n"); |
| if (!disabled) |
| ice_service_task_restart(pf); |
| return 0; |
| } |
| |
| ice_setup_mc_magic_wake(pf); |
| |
| ice_prepare_for_shutdown(pf); |
| |
| ice_set_wake(pf); |
| |
| /* Free vectors, clear the interrupt scheme and release IRQs |
| * for proper hibernation, especially with large number of CPUs. |
| * Otherwise hibernation might fail when mapping all the vectors back |
| * to CPU0. |
| */ |
| ice_free_irq_msix_misc(pf); |
| ice_for_each_vsi(pf, v) { |
| if (!pf->vsi[v]) |
| continue; |
| ice_vsi_free_q_vectors(pf->vsi[v]); |
| } |
| ice_clear_interrupt_scheme(pf); |
| |
| pci_save_state(pdev); |
| pci_wake_from_d3(pdev, pf->wol_ena); |
| pci_set_power_state(pdev, PCI_D3hot); |
| return 0; |
| } |
| |
| /** |
| * ice_resume - PM callback for waking up from D3 |
| * @dev: generic device information structure |
| */ |
| static int __maybe_unused ice_resume(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| enum ice_reset_req reset_type; |
| struct ice_pf *pf; |
| struct ice_hw *hw; |
| int ret; |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| pci_save_state(pdev); |
| |
| if (!pci_device_is_present(pdev)) |
| return -ENODEV; |
| |
| ret = pci_enable_device_mem(pdev); |
| if (ret) { |
| dev_err(dev, "Cannot enable device after suspend\n"); |
| return ret; |
| } |
| |
| pf = pci_get_drvdata(pdev); |
| hw = &pf->hw; |
| |
| pf->wakeup_reason = rd32(hw, PFPM_WUS); |
| ice_print_wake_reason(pf); |
| |
| /* We cleared the interrupt scheme when we suspended, so we need to |
| * restore it now to resume device functionality. |
| */ |
| ret = ice_reinit_interrupt_scheme(pf); |
| if (ret) |
| dev_err(dev, "Cannot restore interrupt scheme: %d\n", ret); |
| |
| clear_bit(ICE_DOWN, pf->state); |
| /* Now perform PF reset and rebuild */ |
| reset_type = ICE_RESET_PFR; |
| /* re-enable service task for reset, but allow reset to schedule it */ |
| clear_bit(ICE_SERVICE_DIS, pf->state); |
| |
| if (ice_schedule_reset(pf, reset_type)) |
| dev_err(dev, "Reset during resume failed.\n"); |
| |
| clear_bit(ICE_SUSPENDED, pf->state); |
| ice_service_task_restart(pf); |
| |
| /* Restart the service task */ |
| mod_timer(&pf->serv_tmr, round_jiffies(jiffies + pf->serv_tmr_period)); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| /** |
| * ice_pci_err_detected - warning that PCI error has been detected |
| * @pdev: PCI device information struct |
| * @err: the type of PCI error |
| * |
| * Called to warn that something happened on the PCI bus and the error handling |
| * is in progress. Allows the driver to gracefully prepare/handle PCI errors. |
| */ |
| static pci_ers_result_t |
| ice_pci_err_detected(struct pci_dev *pdev, pci_channel_state_t err) |
| { |
| struct ice_pf *pf = pci_get_drvdata(pdev); |
| |
| if (!pf) { |
| dev_err(&pdev->dev, "%s: unrecoverable device error %d\n", |
| __func__, err); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| |
| if (!test_bit(ICE_SUSPENDED, pf->state)) { |
| ice_service_task_stop(pf); |
| |
| if (!test_bit(ICE_PREPARED_FOR_RESET, pf->state)) { |
| set_bit(ICE_PFR_REQ, pf->state); |
| ice_prepare_for_reset(pf, ICE_RESET_PFR); |
| } |
| } |
| |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| /** |
| * ice_pci_err_slot_reset - a PCI slot reset has just happened |
| * @pdev: PCI device information struct |
| * |
| * Called to determine if the driver can recover from the PCI slot reset by |
| * using a register read to determine if the device is recoverable. |
| */ |
| static pci_ers_result_t ice_pci_err_slot_reset(struct pci_dev *pdev) |
| { |
| struct ice_pf *pf = pci_get_drvdata(pdev); |
| pci_ers_result_t result; |
| int err; |
| u32 reg; |
| |
| err = pci_enable_device_mem(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "Cannot re-enable PCI device after reset, error %d\n", |
| err); |
| result = PCI_ERS_RESULT_DISCONNECT; |
| } else { |
| pci_set_master(pdev); |
| pci_restore_state(pdev); |
| pci_save_state(pdev); |
| pci_wake_from_d3(pdev, false); |
| |
| /* Check for life */ |
| reg = rd32(&pf->hw, GLGEN_RTRIG); |
| if (!reg) |
| result = PCI_ERS_RESULT_RECOVERED; |
| else |
| result = PCI_ERS_RESULT_DISCONNECT; |
| } |
| |
| return result; |
| } |
| |
| /** |
| * ice_pci_err_resume - restart operations after PCI error recovery |
| * @pdev: PCI device information struct |
| * |
| * Called to allow the driver to bring things back up after PCI error and/or |
| * reset recovery have finished |
| */ |
| static void ice_pci_err_resume(struct pci_dev *pdev) |
| { |
| struct ice_pf *pf = pci_get_drvdata(pdev); |
| |
| if (!pf) { |
| dev_err(&pdev->dev, "%s failed, device is unrecoverable\n", |
| __func__); |
| return; |
| } |
| |
| if (test_bit(ICE_SUSPENDED, pf->state)) { |
| dev_dbg(&pdev->dev, "%s failed to resume normal operations!\n", |
| __func__); |
| return; |
| } |
| |
| ice_restore_all_vfs_msi_state(pdev); |
| |
| ice_do_reset(pf, ICE_RESET_PFR); |
| ice_service_task_restart(pf); |
| mod_timer(&pf->serv_tmr, round_jiffies(jiffies + pf->serv_tmr_period)); |
| } |
| |
| /** |
| * ice_pci_err_reset_prepare - prepare device driver for PCI reset |
| * @pdev: PCI device information struct |
| */ |
| static void ice_pci_err_reset_prepare(struct pci_dev *pdev) |
| { |
| struct ice_pf *pf = pci_get_drvdata(pdev); |
| |
| if (!test_bit(ICE_SUSPENDED, pf->state)) { |
| ice_service_task_stop(pf); |
| |
| if (!test_bit(ICE_PREPARED_FOR_RESET, pf->state)) { |
| set_bit(ICE_PFR_REQ, pf->state); |
| ice_prepare_for_reset(pf, ICE_RESET_PFR); |
| } |
| } |
| } |
| |
| /** |
| * ice_pci_err_reset_done - PCI reset done, device driver reset can begin |
| * @pdev: PCI device information struct |
| */ |
| static void ice_pci_err_reset_done(struct pci_dev *pdev) |
| { |
| ice_pci_err_resume(pdev); |
| } |
| |
| /* ice_pci_tbl - PCI Device ID Table |
| * |
| * Wildcard entries (PCI_ANY_ID) should come last |
| * Last entry must be all 0s |
| * |
| * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, |
| * Class, Class Mask, private data (not used) } |
| */ |
| static const struct pci_device_id ice_pci_tbl[] = { |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E810C_BACKPLANE), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E810C_QSFP), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E810C_SFP), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E810_XXV_BACKPLANE), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E810_XXV_QSFP), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E810_XXV_SFP), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E823C_BACKPLANE), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E823C_QSFP), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E823C_SFP), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E823C_10G_BASE_T), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E823C_SGMII), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E822C_BACKPLANE), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E822C_QSFP), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E822C_SFP), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E822C_10G_BASE_T), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E822C_SGMII), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E822L_BACKPLANE), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E822L_SFP), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E822L_10G_BASE_T), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E822L_SGMII), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E823L_BACKPLANE), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E823L_SFP), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E823L_10G_BASE_T), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E823L_1GBE), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E823L_QSFP), 0 }, |
| { PCI_VDEVICE(INTEL, ICE_DEV_ID_E822_SI_DFLT), 0 }, |
| /* required last entry */ |
| { 0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, ice_pci_tbl); |
| |
| static __maybe_unused SIMPLE_DEV_PM_OPS(ice_pm_ops, ice_suspend, ice_resume); |
| |
| static const struct pci_error_handlers ice_pci_err_handler = { |
| .error_detected = ice_pci_err_detected, |
| .slot_reset = ice_pci_err_slot_reset, |
| .reset_prepare = ice_pci_err_reset_prepare, |
| .reset_done = ice_pci_err_reset_done, |
| .resume = ice_pci_err_resume |
| }; |
| |
| static struct pci_driver ice_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = ice_pci_tbl, |
| .probe = ice_probe, |
| .remove = ice_remove, |
| #ifdef CONFIG_PM |
| .driver.pm = &ice_pm_ops, |
| #endif /* CONFIG_PM */ |
| .shutdown = ice_shutdown, |
| .sriov_configure = ice_sriov_configure, |
| .err_handler = &ice_pci_err_handler |
| }; |
| |
| /** |
| * ice_module_init - Driver registration routine |
| * |
| * ice_module_init is the first routine called when the driver is |
| * loaded. All it does is register with the PCI subsystem. |
| */ |
| static int __init ice_module_init(void) |
| { |
| int status; |
| |
| pr_info("%s\n", ice_driver_string); |
| pr_info("%s\n", ice_copyright); |
| |
| ice_wq = alloc_workqueue("%s", 0, 0, KBUILD_MODNAME); |
| if (!ice_wq) { |
| pr_err("Failed to create workqueue\n"); |
| return -ENOMEM; |
| } |
| |
| status = pci_register_driver(&ice_driver); |
| if (status) { |
| pr_err("failed to register PCI driver, err %d\n", status); |
| destroy_workqueue(ice_wq); |
| } |
| |
| return status; |
| } |
| module_init(ice_module_init); |
| |
| /** |
| * ice_module_exit - Driver exit cleanup routine |
| * |
| * ice_module_exit is called just before the driver is removed |
| * from memory. |
| */ |
| static void __exit ice_module_exit(void) |
| { |
| pci_unregister_driver(&ice_driver); |
| destroy_workqueue(ice_wq); |
| pr_info("module unloaded\n"); |
| } |
| module_exit(ice_module_exit); |
| |
| /** |
| * ice_set_mac_address - NDO callback to set MAC address |
| * @netdev: network interface device structure |
| * @pi: pointer to an address structure |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int ice_set_mac_address(struct net_device *netdev, void *pi) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| struct ice_pf *pf = vsi->back; |
| struct ice_hw *hw = &pf->hw; |
| struct sockaddr *addr = pi; |
| u8 old_mac[ETH_ALEN]; |
| u8 flags = 0; |
| u8 *mac; |
| int err; |
| |
| mac = (u8 *)addr->sa_data; |
| |
| if (!is_valid_ether_addr(mac)) |
| return -EADDRNOTAVAIL; |
| |
| if (ether_addr_equal(netdev->dev_addr, mac)) { |
| netdev_dbg(netdev, "already using mac %pM\n", mac); |
| return 0; |
| } |
| |
| if (test_bit(ICE_DOWN, pf->state) || |
| ice_is_reset_in_progress(pf->state)) { |
| netdev_err(netdev, "can't set mac %pM. device not ready\n", |
| mac); |
| return -EBUSY; |
| } |
| |
| if (ice_chnl_dmac_fltr_cnt(pf)) { |
| netdev_err(netdev, "can't set mac %pM. Device has tc-flower filters, delete all of them and try again\n", |
| mac); |
| return -EAGAIN; |
| } |
| |
| netif_addr_lock_bh(netdev); |
| ether_addr_copy(old_mac, netdev->dev_addr); |
| /* change the netdev's MAC address */ |
| eth_hw_addr_set(netdev, mac); |
| netif_addr_unlock_bh(netdev); |
| |
| /* Clean up old MAC filter. Not an error if old filter doesn't exist */ |
| err = ice_fltr_remove_mac(vsi, old_mac, ICE_FWD_TO_VSI); |
| if (err && err != -ENOENT) { |
| err = -EADDRNOTAVAIL; |
| goto err_update_filters; |
| } |
| |
| /* Add filter for new MAC. If filter exists, return success */ |
| err = ice_fltr_add_mac(vsi, mac, ICE_FWD_TO_VSI); |
| if (err == -EEXIST) { |
| /* Although this MAC filter is already present in hardware it's |
| * possible in some cases (e.g. bonding) that dev_addr was |
| * modified outside of the driver and needs to be restored back |
| * to this value. |
| */ |
| netdev_dbg(netdev, "filter for MAC %pM already exists\n", mac); |
| |
| return 0; |
| } else if (err) { |
| /* error if the new filter addition failed */ |
| err = -EADDRNOTAVAIL; |
| } |
| |
| err_update_filters: |
| if (err) { |
| netdev_err(netdev, "can't set MAC %pM. filter update failed\n", |
| mac); |
| netif_addr_lock_bh(netdev); |
| eth_hw_addr_set(netdev, old_mac); |
| netif_addr_unlock_bh(netdev); |
| return err; |
| } |
| |
| netdev_dbg(vsi->netdev, "updated MAC address to %pM\n", |
| netdev->dev_addr); |
| |
| /* write new MAC address to the firmware */ |
| flags = ICE_AQC_MAN_MAC_UPDATE_LAA_WOL; |
| err = ice_aq_manage_mac_write(hw, mac, flags, NULL); |
| if (err) { |
| netdev_err(netdev, "can't set MAC %pM. write to firmware failed error %d\n", |
| mac, err); |
| } |
| return 0; |
| } |
| |
| /** |
| * ice_set_rx_mode - NDO callback to set the netdev filters |
| * @netdev: network interface device structure |
| */ |
| static void ice_set_rx_mode(struct net_device *netdev) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| |
| if (!vsi) |
| return; |
| |
| /* Set the flags to synchronize filters |
| * ndo_set_rx_mode may be triggered even without a change in netdev |
| * flags |
| */ |
| set_bit(ICE_VSI_UMAC_FLTR_CHANGED, vsi->state); |
| set_bit(ICE_VSI_MMAC_FLTR_CHANGED, vsi->state); |
| set_bit(ICE_FLAG_FLTR_SYNC, vsi->back->flags); |
| |
| /* schedule our worker thread which will take care of |
| * applying the new filter changes |
| */ |
| ice_service_task_schedule(vsi->back); |
| } |
| |
| /** |
| * ice_set_tx_maxrate - NDO callback to set the maximum per-queue bitrate |
| * @netdev: network interface device structure |
| * @queue_index: Queue ID |
| * @maxrate: maximum bandwidth in Mbps |
| */ |
| static int |
| ice_set_tx_maxrate(struct net_device *netdev, int queue_index, u32 maxrate) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| u16 q_handle; |
| int status; |
| u8 tc; |
| |
| /* Validate maxrate requested is within permitted range */ |
| if (maxrate && (maxrate > (ICE_SCHED_MAX_BW / 1000))) { |
| netdev_err(netdev, "Invalid max rate %d specified for the queue %d\n", |
| maxrate, queue_index); |
| return -EINVAL; |
| } |
| |
| q_handle = vsi->tx_rings[queue_index]->q_handle; |
| tc = ice_dcb_get_tc(vsi, queue_index); |
| |
| /* Set BW back to default, when user set maxrate to 0 */ |
| if (!maxrate) |
| status = ice_cfg_q_bw_dflt_lmt(vsi->port_info, vsi->idx, tc, |
| q_handle, ICE_MAX_BW); |
| else |
| status = ice_cfg_q_bw_lmt(vsi->port_info, vsi->idx, tc, |
| q_handle, ICE_MAX_BW, maxrate * 1000); |
| if (status) |
| netdev_err(netdev, "Unable to set Tx max rate, error %d\n", |
| status); |
| |
| return status; |
| } |
| |
| /** |
| * ice_fdb_add - add an entry to the hardware database |
| * @ndm: the input from the stack |
| * @tb: pointer to array of nladdr (unused) |
| * @dev: the net device pointer |
| * @addr: the MAC address entry being added |
| * @vid: VLAN ID |
| * @flags: instructions from stack about fdb operation |
| * @extack: netlink extended ack |
| */ |
| static int |
| ice_fdb_add(struct ndmsg *ndm, struct nlattr __always_unused *tb[], |
| struct net_device *dev, const unsigned char *addr, u16 vid, |
| u16 flags, struct netlink_ext_ack __always_unused *extack) |
| { |
| int err; |
| |
| if (vid) { |
| netdev_err(dev, "VLANs aren't supported yet for dev_uc|mc_add()\n"); |
| return -EINVAL; |
| } |
| if (ndm->ndm_state && !(ndm->ndm_state & NUD_PERMANENT)) { |
| netdev_err(dev, "FDB only supports static addresses\n"); |
| return -EINVAL; |
| } |
| |
| if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr)) |
| err = dev_uc_add_excl(dev, addr); |
| else if (is_multicast_ether_addr(addr)) |
| err = dev_mc_add_excl(dev, addr); |
| else |
| err = -EINVAL; |
| |
| /* Only return duplicate errors if NLM_F_EXCL is set */ |
| if (err == -EEXIST && !(flags & NLM_F_EXCL)) |
| err = 0; |
| |
| return err; |
| } |
| |
| /** |
| * ice_fdb_del - delete an entry from the hardware database |
| * @ndm: the input from the stack |
| * @tb: pointer to array of nladdr (unused) |
| * @dev: the net device pointer |
| * @addr: the MAC address entry being added |
| * @vid: VLAN ID |
| * @extack: netlink extended ack |
| */ |
| static int |
| ice_fdb_del(struct ndmsg *ndm, __always_unused struct nlattr *tb[], |
| struct net_device *dev, const unsigned char *addr, |
| __always_unused u16 vid, struct netlink_ext_ack *extack) |
| { |
| int err; |
| |
| if (ndm->ndm_state & NUD_PERMANENT) { |
| netdev_err(dev, "FDB only supports static addresses\n"); |
| return -EINVAL; |
| } |
| |
| if (is_unicast_ether_addr(addr)) |
| err = dev_uc_del(dev, addr); |
| else if (is_multicast_ether_addr(addr)) |
| err = dev_mc_del(dev, addr); |
| else |
| err = -EINVAL; |
| |
| return err; |
| } |
| |
| #define NETIF_VLAN_OFFLOAD_FEATURES (NETIF_F_HW_VLAN_CTAG_RX | \ |
| NETIF_F_HW_VLAN_CTAG_TX | \ |
| NETIF_F_HW_VLAN_STAG_RX | \ |
| NETIF_F_HW_VLAN_STAG_TX) |
| |
| #define NETIF_VLAN_STRIPPING_FEATURES (NETIF_F_HW_VLAN_CTAG_RX | \ |
| NETIF_F_HW_VLAN_STAG_RX) |
| |
| #define NETIF_VLAN_FILTERING_FEATURES (NETIF_F_HW_VLAN_CTAG_FILTER | \ |
| NETIF_F_HW_VLAN_STAG_FILTER) |
| |
| /** |
| * ice_fix_features - fix the netdev features flags based on device limitations |
| * @netdev: ptr to the netdev that flags are being fixed on |
| * @features: features that need to be checked and possibly fixed |
| * |
| * Make sure any fixups are made to features in this callback. This enables the |
| * driver to not have to check unsupported configurations throughout the driver |
| * because that's the responsiblity of this callback. |
| * |
| * Single VLAN Mode (SVM) Supported Features: |
| * NETIF_F_HW_VLAN_CTAG_FILTER |
| * NETIF_F_HW_VLAN_CTAG_RX |
| * NETIF_F_HW_VLAN_CTAG_TX |
| * |
| * Double VLAN Mode (DVM) Supported Features: |
| * NETIF_F_HW_VLAN_CTAG_FILTER |
| * NETIF_F_HW_VLAN_CTAG_RX |
| * NETIF_F_HW_VLAN_CTAG_TX |
| * |
| * NETIF_F_HW_VLAN_STAG_FILTER |
| * NETIF_HW_VLAN_STAG_RX |
| * NETIF_HW_VLAN_STAG_TX |
| * |
| * Features that need fixing: |
| * Cannot simultaneously enable CTAG and STAG stripping and/or insertion. |
| * These are mutually exlusive as the VSI context cannot support multiple |
| * VLAN ethertypes simultaneously for stripping and/or insertion. If this |
| * is not done, then default to clearing the requested STAG offload |
| * settings. |
| * |
| * All supported filtering has to be enabled or disabled together. For |
| * example, in DVM, CTAG and STAG filtering have to be enabled and disabled |
| * together. If this is not done, then default to VLAN filtering disabled. |
| * These are mutually exclusive as there is currently no way to |
| * enable/disable VLAN filtering based on VLAN ethertype when using VLAN |
| * prune rules. |
| */ |
| static netdev_features_t |
| ice_fix_features(struct net_device *netdev, netdev_features_t features) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| netdev_features_t req_vlan_fltr, cur_vlan_fltr; |
| bool cur_ctag, cur_stag, req_ctag, req_stag; |
| |
| cur_vlan_fltr = netdev->features & NETIF_VLAN_FILTERING_FEATURES; |
| cur_ctag = cur_vlan_fltr & NETIF_F_HW_VLAN_CTAG_FILTER; |
| cur_stag = cur_vlan_fltr & NETIF_F_HW_VLAN_STAG_FILTER; |
| |
| req_vlan_fltr = features & NETIF_VLAN_FILTERING_FEATURES; |
| req_ctag = req_vlan_fltr & NETIF_F_HW_VLAN_CTAG_FILTER; |
| req_stag = req_vlan_fltr & NETIF_F_HW_VLAN_STAG_FILTER; |
| |
| if (req_vlan_fltr != cur_vlan_fltr) { |
| if (ice_is_dvm_ena(&np->vsi->back->hw)) { |
| if (req_ctag && req_stag) { |
| features |= NETIF_VLAN_FILTERING_FEATURES; |
| } else if (!req_ctag && !req_stag) { |
| features &= ~NETIF_VLAN_FILTERING_FEATURES; |
| } else if ((!cur_ctag && req_ctag && !cur_stag) || |
| (!cur_stag && req_stag && !cur_ctag)) { |
| features |= NETIF_VLAN_FILTERING_FEATURES; |
| netdev_warn(netdev, "802.1Q and 802.1ad VLAN filtering must be either both on or both off. VLAN filtering has been enabled for both types.\n"); |
| } else if ((cur_ctag && !req_ctag && cur_stag) || |
| (cur_stag && !req_stag && cur_ctag)) { |
| features &= ~NETIF_VLAN_FILTERING_FEATURES; |
| netdev_warn(netdev, "802.1Q and 802.1ad VLAN filtering must be either both on or both off. VLAN filtering has been disabled for both types.\n"); |
| } |
| } else { |
| if (req_vlan_fltr & NETIF_F_HW_VLAN_STAG_FILTER) |
| netdev_warn(netdev, "cannot support requested 802.1ad filtering setting in SVM mode\n"); |
| |
| if (req_vlan_fltr & NETIF_F_HW_VLAN_CTAG_FILTER) |
| features |= NETIF_F_HW_VLAN_CTAG_FILTER; |
| } |
| } |
| |
| if ((features & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX)) && |
| (features & (NETIF_F_HW_VLAN_STAG_RX | NETIF_F_HW_VLAN_STAG_TX))) { |
| netdev_warn(netdev, "cannot support CTAG and STAG VLAN stripping and/or insertion simultaneously since CTAG and STAG offloads are mutually exclusive, clearing STAG offload settings\n"); |
| features &= ~(NETIF_F_HW_VLAN_STAG_RX | |
| NETIF_F_HW_VLAN_STAG_TX); |
| } |
| |
| if (!(netdev->features & NETIF_F_RXFCS) && |
| (features & NETIF_F_RXFCS) && |
| (features & NETIF_VLAN_STRIPPING_FEATURES) && |
| !ice_vsi_has_non_zero_vlans(np->vsi)) { |
| netdev_warn(netdev, "Disabling VLAN stripping as FCS/CRC stripping is also disabled and there is no VLAN configured\n"); |
| features &= ~NETIF_VLAN_STRIPPING_FEATURES; |
| } |
| |
| return features; |
| } |
| |
| /** |
| * ice_set_vlan_offload_features - set VLAN offload features for the PF VSI |
| * @vsi: PF's VSI |
| * @features: features used to determine VLAN offload settings |
| * |
| * First, determine the vlan_ethertype based on the VLAN offload bits in |
| * features. Then determine if stripping and insertion should be enabled or |
| * disabled. Finally enable or disable VLAN stripping and insertion. |
| */ |
| static int |
| ice_set_vlan_offload_features(struct ice_vsi *vsi, netdev_features_t features) |
| { |
| bool enable_stripping = true, enable_insertion = true; |
| struct ice_vsi_vlan_ops *vlan_ops; |
| int strip_err = 0, insert_err = 0; |
| u16 vlan_ethertype = 0; |
| |
| vlan_ops = ice_get_compat_vsi_vlan_ops(vsi); |
| |
| if (features & (NETIF_F_HW_VLAN_STAG_RX | NETIF_F_HW_VLAN_STAG_TX)) |
| vlan_ethertype = ETH_P_8021AD; |
| else if (features & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX)) |
| vlan_ethertype = ETH_P_8021Q; |
| |
| if (!(features & (NETIF_F_HW_VLAN_STAG_RX | NETIF_F_HW_VLAN_CTAG_RX))) |
| enable_stripping = false; |
| if (!(features & (NETIF_F_HW_VLAN_STAG_TX | NETIF_F_HW_VLAN_CTAG_TX))) |
| enable_insertion = false; |
| |
| if (enable_stripping) |
| strip_err = vlan_ops->ena_stripping(vsi, vlan_ethertype); |
| else |
| strip_err = vlan_ops->dis_stripping(vsi); |
| |
| if (enable_insertion) |
| insert_err = vlan_ops->ena_insertion(vsi, vlan_ethertype); |
| else |
| insert_err = vlan_ops->dis_insertion(vsi); |
| |
| if (strip_err || insert_err) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_set_vlan_filtering_features - set VLAN filtering features for the PF VSI |
| * @vsi: PF's VSI |
| * @features: features used to determine VLAN filtering settings |
| * |
| * Enable or disable Rx VLAN filtering based on the VLAN filtering bits in the |
| * features. |
| */ |
| static int |
| ice_set_vlan_filtering_features(struct ice_vsi *vsi, netdev_features_t features) |
| { |
| struct ice_vsi_vlan_ops *vlan_ops = ice_get_compat_vsi_vlan_ops(vsi); |
| int err = 0; |
| |
| /* support Single VLAN Mode (SVM) and Double VLAN Mode (DVM) by checking |
| * if either bit is set |
| */ |
| if (features & |
| (NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_VLAN_STAG_FILTER)) |
| err = vlan_ops->ena_rx_filtering(vsi); |
| else |
| err = vlan_ops->dis_rx_filtering(vsi); |
| |
| return err; |
| } |
| |
| /** |
| * ice_set_vlan_features - set VLAN settings based on suggested feature set |
| * @netdev: ptr to the netdev being adjusted |
| * @features: the feature set that the stack is suggesting |
| * |
| * Only update VLAN settings if the requested_vlan_features are different than |
| * the current_vlan_features. |
| */ |
| static int |
| ice_set_vlan_features(struct net_device *netdev, netdev_features_t features) |
| { |
| netdev_features_t current_vlan_features, requested_vlan_features; |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| int err; |
| |
| current_vlan_features = netdev->features & NETIF_VLAN_OFFLOAD_FEATURES; |
| requested_vlan_features = features & NETIF_VLAN_OFFLOAD_FEATURES; |
| if (current_vlan_features ^ requested_vlan_features) { |
| if ((features & NETIF_F_RXFCS) && |
| (features & NETIF_VLAN_STRIPPING_FEATURES)) { |
| dev_err(ice_pf_to_dev(vsi->back), |
| "To enable VLAN stripping, you must first enable FCS/CRC stripping\n"); |
| return -EIO; |
| } |
| |
| err = ice_set_vlan_offload_features(vsi, features); |
| if (err) |
| return err; |
| } |
| |
| current_vlan_features = netdev->features & |
| NETIF_VLAN_FILTERING_FEATURES; |
| requested_vlan_features = features & NETIF_VLAN_FILTERING_FEATURES; |
| if (current_vlan_features ^ requested_vlan_features) { |
| err = ice_set_vlan_filtering_features(vsi, features); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_set_loopback - turn on/off loopback mode on underlying PF |
| * @vsi: ptr to VSI |
| * @ena: flag to indicate the on/off setting |
| */ |
| static int ice_set_loopback(struct ice_vsi *vsi, bool ena) |
| { |
| bool if_running = netif_running(vsi->netdev); |
| int ret; |
| |
| if (if_running && !test_and_set_bit(ICE_VSI_DOWN, vsi->state)) { |
| ret = ice_down(vsi); |
| if (ret) { |
| netdev_err(vsi->netdev, "Preparing device to toggle loopback failed\n"); |
| return ret; |
| } |
| } |
| ret = ice_aq_set_mac_loopback(&vsi->back->hw, ena, NULL); |
| if (ret) |
| netdev_err(vsi->netdev, "Failed to toggle loopback state\n"); |
| if (if_running) |
| ret = ice_up(vsi); |
| |
| return ret; |
| } |
| |
| /** |
| * ice_set_features - set the netdev feature flags |
| * @netdev: ptr to the netdev being adjusted |
| * @features: the feature set that the stack is suggesting |
| */ |
| static int |
| ice_set_features(struct net_device *netdev, netdev_features_t features) |
| { |
| netdev_features_t changed = netdev->features ^ features; |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| struct ice_pf *pf = vsi->back; |
| int ret = 0; |
| |
| /* Don't set any netdev advanced features with device in Safe Mode */ |
| if (ice_is_safe_mode(pf)) { |
| dev_err(ice_pf_to_dev(pf), |
| "Device is in Safe Mode - not enabling advanced netdev features\n"); |
| return ret; |
| } |
| |
| /* Do not change setting during reset */ |
| if (ice_is_reset_in_progress(pf->state)) { |
| dev_err(ice_pf_to_dev(pf), |
| "Device is resetting, changing advanced netdev features temporarily unavailable.\n"); |
| return -EBUSY; |
| } |
| |
| /* Multiple features can be changed in one call so keep features in |
| * separate if/else statements to guarantee each feature is checked |
| */ |
| if (changed & NETIF_F_RXHASH) |
| ice_vsi_manage_rss_lut(vsi, !!(features & NETIF_F_RXHASH)); |
| |
| ret = ice_set_vlan_features(netdev, features); |
| if (ret) |
| return ret; |
| |
| /* Turn on receive of FCS aka CRC, and after setting this |
| * flag the packet data will have the 4 byte CRC appended |
| */ |
| if (changed & NETIF_F_RXFCS) { |
| if ((features & NETIF_F_RXFCS) && |
| (features & NETIF_VLAN_STRIPPING_FEATURES)) { |
| dev_err(ice_pf_to_dev(vsi->back), |
| "To disable FCS/CRC stripping, you must first disable VLAN stripping\n"); |
| return -EIO; |
| } |
| |
| ice_vsi_cfg_crc_strip(vsi, !!(features & NETIF_F_RXFCS)); |
| ret = ice_down_up(vsi); |
| if (ret) |
| return ret; |
| } |
| |
| if (changed & NETIF_F_NTUPLE) { |
| bool ena = !!(features & NETIF_F_NTUPLE); |
| |
| ice_vsi_manage_fdir(vsi, ena); |
| ena ? ice_init_arfs(vsi) : ice_clear_arfs(vsi); |
| } |
| |
| /* don't turn off hw_tc_offload when ADQ is already enabled */ |
| if (!(features & NETIF_F_HW_TC) && ice_is_adq_active(pf)) { |
| dev_err(ice_pf_to_dev(pf), "ADQ is active, can't turn hw_tc_offload off\n"); |
| return -EACCES; |
| } |
| |
| if (changed & NETIF_F_HW_TC) { |
| bool ena = !!(features & NETIF_F_HW_TC); |
| |
| ena ? set_bit(ICE_FLAG_CLS_FLOWER, pf->flags) : |
| clear_bit(ICE_FLAG_CLS_FLOWER, pf->flags); |
| } |
| |
| if (changed & NETIF_F_LOOPBACK) |
| ret = ice_set_loopback(vsi, !!(features & NETIF_F_LOOPBACK)); |
| |
| return ret; |
| } |
| |
| /** |
| * ice_vsi_vlan_setup - Setup VLAN offload properties on a PF VSI |
| * @vsi: VSI to setup VLAN properties for |
| */ |
| static int ice_vsi_vlan_setup(struct ice_vsi *vsi) |
| { |
| int err; |
| |
| err = ice_set_vlan_offload_features(vsi, vsi->netdev->features); |
| if (err) |
| return err; |
| |
| err = ice_set_vlan_filtering_features(vsi, vsi->netdev->features); |
| if (err) |
| return err; |
| |
| return ice_vsi_add_vlan_zero(vsi); |
| } |
| |
| /** |
| * ice_vsi_cfg - Setup the VSI |
| * @vsi: the VSI being configured |
| * |
| * Return 0 on success and negative value on error |
| */ |
| int ice_vsi_cfg(struct ice_vsi *vsi) |
| { |
| int err; |
| |
| if (vsi->netdev) { |
| ice_set_rx_mode(vsi->netdev); |
| |
| if (vsi->type != ICE_VSI_LB) { |
| err = ice_vsi_vlan_setup(vsi); |
| |
| if (err) |
| return err; |
| } |
| } |
| ice_vsi_cfg_dcb_rings(vsi); |
| |
| err = ice_vsi_cfg_lan_txqs(vsi); |
| if (!err && ice_is_xdp_ena_vsi(vsi)) |
| err = ice_vsi_cfg_xdp_txqs(vsi); |
| if (!err) |
| err = ice_vsi_cfg_rxqs(vsi); |
| |
| return err; |
| } |
| |
| /* THEORY OF MODERATION: |
| * The ice driver hardware works differently than the hardware that DIMLIB was |
| * originally made for. ice hardware doesn't have packet count limits that |
| * can trigger an interrupt, but it *does* have interrupt rate limit support, |
| * which is hard-coded to a limit of 250,000 ints/second. |
| * If not using dynamic moderation, the INTRL value can be modified |
| * by ethtool rx-usecs-high. |
| */ |
| struct ice_dim { |
| /* the throttle rate for interrupts, basically worst case delay before |
| * an initial interrupt fires, value is stored in microseconds. |
| */ |
| u16 itr; |
| }; |
| |
| /* Make a different profile for Rx that doesn't allow quite so aggressive |
| * moderation at the high end (it maxes out at 126us or about 8k interrupts a |
| * second. |
| */ |
| static const struct ice_dim rx_profile[] = { |
| {2}, /* 500,000 ints/s, capped at 250K by INTRL */ |
| {8}, /* 125,000 ints/s */ |
| {16}, /* 62,500 ints/s */ |
| {62}, /* 16,129 ints/s */ |
| {126} /* 7,936 ints/s */ |
| }; |
| |
| /* The transmit profile, which has the same sorts of values |
| * as the previous struct |
| */ |
| static const struct ice_dim tx_profile[] = { |
| {2}, /* 500,000 ints/s, capped at 250K by INTRL */ |
| {8}, /* 125,000 ints/s */ |
| {40}, /* 16,125 ints/s */ |
| {128}, /* 7,812 ints/s */ |
| {256} /* 3,906 ints/s */ |
| }; |
| |
| static void ice_tx_dim_work(struct work_struct *work) |
| { |
| struct ice_ring_container *rc; |
| struct dim *dim; |
| u16 itr; |
| |
| dim = container_of(work, struct dim, work); |
| rc = (struct ice_ring_container *)dim->priv; |
| |
| WARN_ON(dim->profile_ix >= ARRAY_SIZE(tx_profile)); |
| |
| /* look up the values in our local table */ |
| itr = tx_profile[dim->profile_ix].itr; |
| |
| ice_trace(tx_dim_work, container_of(rc, struct ice_q_vector, tx), dim); |
| ice_write_itr(rc, itr); |
| |
| dim->state = DIM_START_MEASURE; |
| } |
| |
| static void ice_rx_dim_work(struct work_struct *work) |
| { |
| struct ice_ring_container *rc; |
| struct dim *dim; |
| u16 itr; |
| |
| dim = container_of(work, struct dim, work); |
| rc = (struct ice_ring_container *)dim->priv; |
| |
| WARN_ON(dim->profile_ix >= ARRAY_SIZE(rx_profile)); |
| |
| /* look up the values in our local table */ |
| itr = rx_profile[dim->profile_ix].itr; |
| |
| ice_trace(rx_dim_work, container_of(rc, struct ice_q_vector, rx), dim); |
| ice_write_itr(rc, itr); |
| |
| dim->state = DIM_START_MEASURE; |
| } |
| |
| #define ICE_DIM_DEFAULT_PROFILE_IX 1 |
| |
| /** |
| * ice_init_moderation - set up interrupt moderation |
| * @q_vector: the vector containing rings to be configured |
| * |
| * Set up interrupt moderation registers, with the intent to do the right thing |
| * when called from reset or from probe, and whether or not dynamic moderation |
| * is enabled or not. Take special care to write all the registers in both |
| * dynamic moderation mode or not in order to make sure hardware is in a known |
| * state. |
| */ |
| static void ice_init_moderation(struct ice_q_vector *q_vector) |
| { |
| struct ice_ring_container *rc; |
| bool tx_dynamic, rx_dynamic; |
| |
| rc = &q_vector->tx; |
| INIT_WORK(&rc->dim.work, ice_tx_dim_work); |
| rc->dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE; |
| rc->dim.profile_ix = ICE_DIM_DEFAULT_PROFILE_IX; |
| rc->dim.priv = rc; |
| tx_dynamic = ITR_IS_DYNAMIC(rc); |
| |
| /* set the initial TX ITR to match the above */ |
| ice_write_itr(rc, tx_dynamic ? |
| tx_profile[rc->dim.profile_ix].itr : rc->itr_setting); |
| |
| rc = &q_vector->rx; |
| INIT_WORK(&rc->dim.work, ice_rx_dim_work); |
| rc->dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_EQE; |
| rc->dim.profile_ix = ICE_DIM_DEFAULT_PROFILE_IX; |
| rc->dim.priv = rc; |
| rx_dynamic = ITR_IS_DYNAMIC(rc); |
| |
| /* set the initial RX ITR to match the above */ |
| ice_write_itr(rc, rx_dynamic ? rx_profile[rc->dim.profile_ix].itr : |
| rc->itr_setting); |
| |
| ice_set_q_vector_intrl(q_vector); |
| } |
| |
| /** |
| * ice_napi_enable_all - Enable NAPI for all q_vectors in the VSI |
| * @vsi: the VSI being configured |
| */ |
| static void ice_napi_enable_all(struct ice_vsi *vsi) |
| { |
| int q_idx; |
| |
| if (!vsi->netdev) |
| return; |
| |
| ice_for_each_q_vector(vsi, q_idx) { |
| struct ice_q_vector *q_vector = vsi->q_vectors[q_idx]; |
| |
| ice_init_moderation(q_vector); |
| |
| if (q_vector->rx.rx_ring || q_vector->tx.tx_ring) |
| napi_enable(&q_vector->napi); |
| } |
| } |
| |
| /** |
| * ice_up_complete - Finish the last steps of bringing up a connection |
| * @vsi: The VSI being configured |
| * |
| * Return 0 on success and negative value on error |
| */ |
| static int ice_up_complete(struct ice_vsi *vsi) |
| { |
| struct ice_pf *pf = vsi->back; |
| int err; |
| |
| ice_vsi_cfg_msix(vsi); |
| |
| /* Enable only Rx rings, Tx rings were enabled by the FW when the |
| * Tx queue group list was configured and the context bits were |
| * programmed using ice_vsi_cfg_txqs |
| */ |
| err = ice_vsi_start_all_rx_rings(vsi); |
| if (err) |
| return err; |
| |
| clear_bit(ICE_VSI_DOWN, vsi->state); |
| ice_napi_enable_all(vsi); |
| ice_vsi_ena_irq(vsi); |
| |
| if (vsi->port_info && |
| (vsi->port_info->phy.link_info.link_info & ICE_AQ_LINK_UP) && |
| vsi->netdev) { |
| ice_print_link_msg(vsi, true); |
| netif_tx_start_all_queues(vsi->netdev); |
| netif_carrier_on(vsi->netdev); |
| ice_ptp_link_change(pf, pf->hw.pf_id, true); |
| } |
| |
| /* Perform an initial read of the statistics registers now to |
| * set the baseline so counters are ready when interface is up |
| */ |
| ice_update_eth_stats(vsi); |
| ice_service_task_schedule(pf); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_up - Bring the connection back up after being down |
| * @vsi: VSI being configured |
| */ |
| int ice_up(struct ice_vsi *vsi) |
| { |
| int err; |
| |
| err = ice_vsi_cfg(vsi); |
| if (!err) |
| err = ice_up_complete(vsi); |
| |
| return err; |
| } |
| |
| /** |
| * ice_fetch_u64_stats_per_ring - get packets and bytes stats per ring |
| * @syncp: pointer to u64_stats_sync |
| * @stats: stats that pkts and bytes count will be taken from |
| * @pkts: packets stats counter |
| * @bytes: bytes stats counter |
| * |
| * This function fetches stats from the ring considering the atomic operations |
| * that needs to be performed to read u64 values in 32 bit machine. |
| */ |
| void |
| ice_fetch_u64_stats_per_ring(struct u64_stats_sync *syncp, |
| struct ice_q_stats stats, u64 *pkts, u64 *bytes) |
| { |
| unsigned int start; |
| |
| do { |
| start = u64_stats_fetch_begin(syncp); |
| *pkts = stats.pkts; |
| *bytes = stats.bytes; |
| } while (u64_stats_fetch_retry(syncp, start)); |
| } |
| |
| /** |
| * ice_update_vsi_tx_ring_stats - Update VSI Tx ring stats counters |
| * @vsi: the VSI to be updated |
| * @vsi_stats: the stats struct to be updated |
| * @rings: rings to work on |
| * @count: number of rings |
| */ |
| static void |
| ice_update_vsi_tx_ring_stats(struct ice_vsi *vsi, |
| struct rtnl_link_stats64 *vsi_stats, |
| struct ice_tx_ring **rings, u16 count) |
| { |
| u16 i; |
| |
| for (i = 0; i < count; i++) { |
| struct ice_tx_ring *ring; |
| u64 pkts = 0, bytes = 0; |
| |
| ring = READ_ONCE(rings[i]); |
| if (!ring || !ring->ring_stats) |
| continue; |
| ice_fetch_u64_stats_per_ring(&ring->ring_stats->syncp, |
| ring->ring_stats->stats, &pkts, |
| &bytes); |
| vsi_stats->tx_packets += pkts; |
| vsi_stats->tx_bytes += bytes; |
| vsi->tx_restart += ring->ring_stats->tx_stats.restart_q; |
| vsi->tx_busy += ring->ring_stats->tx_stats.tx_busy; |
| vsi->tx_linearize += ring->ring_stats->tx_stats.tx_linearize; |
| } |
| } |
| |
| /** |
| * ice_update_vsi_ring_stats - Update VSI stats counters |
| * @vsi: the VSI to be updated |
| */ |
| static void ice_update_vsi_ring_stats(struct ice_vsi *vsi) |
| { |
| struct rtnl_link_stats64 *net_stats, *stats_prev; |
| struct rtnl_link_stats64 *vsi_stats; |
| u64 pkts, bytes; |
| int i; |
| |
| vsi_stats = kzalloc(sizeof(*vsi_stats), GFP_ATOMIC); |
| if (!vsi_stats) |
| return; |
| |
| /* reset non-netdev (extended) stats */ |
| vsi->tx_restart = 0; |
| vsi->tx_busy = 0; |
| vsi->tx_linearize = 0; |
| vsi->rx_buf_failed = 0; |
| vsi->rx_page_failed = 0; |
| |
| rcu_read_lock(); |
| |
| /* update Tx rings counters */ |
| ice_update_vsi_tx_ring_stats(vsi, vsi_stats, vsi->tx_rings, |
| vsi->num_txq); |
| |
| /* update Rx rings counters */ |
| ice_for_each_rxq(vsi, i) { |
| struct ice_rx_ring *ring = READ_ONCE(vsi->rx_rings[i]); |
| struct ice_ring_stats *ring_stats; |
| |
| ring_stats = ring->ring_stats; |
| ice_fetch_u64_stats_per_ring(&ring_stats->syncp, |
| ring_stats->stats, &pkts, |
| &bytes); |
| vsi_stats->rx_packets += pkts; |
| vsi_stats->rx_bytes += bytes; |
| vsi->rx_buf_failed += ring_stats->rx_stats.alloc_buf_failed; |
| vsi->rx_page_failed += ring_stats->rx_stats.alloc_page_failed; |
| } |
| |
| /* update XDP Tx rings counters */ |
| if (ice_is_xdp_ena_vsi(vsi)) |
| ice_update_vsi_tx_ring_stats(vsi, vsi_stats, vsi->xdp_rings, |
| vsi->num_xdp_txq); |
| |
| rcu_read_unlock(); |
| |
| net_stats = &vsi->net_stats; |
| stats_prev = &vsi->net_stats_prev; |
| |
| /* clear prev counters after reset */ |
| if (vsi_stats->tx_packets < stats_prev->tx_packets || |
| vsi_stats->rx_packets < stats_prev->rx_packets) { |
| stats_prev->tx_packets = 0; |
| stats_prev->tx_bytes = 0; |
| stats_prev->rx_packets = 0; |
| stats_prev->rx_bytes = 0; |
| } |
| |
| /* update netdev counters */ |
| net_stats->tx_packets += vsi_stats->tx_packets - stats_prev->tx_packets; |
| net_stats->tx_bytes += vsi_stats->tx_bytes - stats_prev->tx_bytes; |
| net_stats->rx_packets += vsi_stats->rx_packets - stats_prev->rx_packets; |
| net_stats->rx_bytes += vsi_stats->rx_bytes - stats_prev->rx_bytes; |
| |
| stats_prev->tx_packets = vsi_stats->tx_packets; |
| stats_prev->tx_bytes = vsi_stats->tx_bytes; |
| stats_prev->rx_packets = vsi_stats->rx_packets; |
| stats_prev->rx_bytes = vsi_stats->rx_bytes; |
| |
| kfree(vsi_stats); |
| } |
| |
| /** |
| * ice_update_vsi_stats - Update VSI stats counters |
| * @vsi: the VSI to be updated |
| */ |
| void ice_update_vsi_stats(struct ice_vsi *vsi) |
| { |
| struct rtnl_link_stats64 *cur_ns = &vsi->net_stats; |
| struct ice_eth_stats *cur_es = &vsi->eth_stats; |
| struct ice_pf *pf = vsi->back; |
| |
| if (test_bit(ICE_VSI_DOWN, vsi->state) || |
| test_bit(ICE_CFG_BUSY, pf->state)) |
| return; |
| |
| /* get stats as recorded by Tx/Rx rings */ |
| ice_update_vsi_ring_stats(vsi); |
| |
| /* get VSI stats as recorded by the hardware */ |
| ice_update_eth_stats(vsi); |
| |
| cur_ns->tx_errors = cur_es->tx_errors; |
| cur_ns->rx_dropped = cur_es->rx_discards; |
| cur_ns->tx_dropped = cur_es->tx_discards; |
| cur_ns->multicast = cur_es->rx_multicast; |
| |
| /* update some more netdev stats if this is main VSI */ |
| if (vsi->type == ICE_VSI_PF) { |
| cur_ns->rx_crc_errors = pf->stats.crc_errors; |
| cur_ns->rx_errors = pf->stats.crc_errors + |
| pf->stats.illegal_bytes + |
| pf->stats.rx_len_errors + |
| pf->stats.rx_undersize + |
| pf->hw_csum_rx_error + |
| pf->stats.rx_jabber + |
| pf->stats.rx_fragments + |
| pf->stats.rx_oversize; |
| cur_ns->rx_length_errors = pf->stats.rx_len_errors; |
| /* record drops from the port level */ |
| cur_ns->rx_missed_errors = pf->stats.eth.rx_discards; |
| } |
| } |
| |
| /** |
| * ice_update_pf_stats - Update PF port stats counters |
| * @pf: PF whose stats needs to be updated |
| */ |
| void ice_update_pf_stats(struct ice_pf *pf) |
| { |
| struct ice_hw_port_stats *prev_ps, *cur_ps; |
| struct ice_hw *hw = &pf->hw; |
| u16 fd_ctr_base; |
| u8 port; |
| |
| port = hw->port_info->lport; |
| prev_ps = &pf->stats_prev; |
| cur_ps = &pf->stats; |
| |
| if (ice_is_reset_in_progress(pf->state)) |
| pf->stat_prev_loaded = false; |
| |
| ice_stat_update40(hw, GLPRT_GORCL(port), pf->stat_prev_loaded, |
| &prev_ps->eth.rx_bytes, |
| &cur_ps->eth.rx_bytes); |
| |
| ice_stat_update40(hw, GLPRT_UPRCL(port), pf->stat_prev_loaded, |
| &prev_ps->eth.rx_unicast, |
| &cur_ps->eth.rx_unicast); |
| |
| ice_stat_update40(hw, GLPRT_MPRCL(port), pf->stat_prev_loaded, |
| &prev_ps->eth.rx_multicast, |
| &cur_ps->eth.rx_multicast); |
| |
| ice_stat_update40(hw, GLPRT_BPRCL(port), pf->stat_prev_loaded, |
| &prev_ps->eth.rx_broadcast, |
| &cur_ps->eth.rx_broadcast); |
| |
| ice_stat_update32(hw, PRTRPB_RDPC, pf->stat_prev_loaded, |
| &prev_ps->eth.rx_discards, |
| &cur_ps->eth.rx_discards); |
| |
| ice_stat_update40(hw, GLPRT_GOTCL(port), pf->stat_prev_loaded, |
| &prev_ps->eth.tx_bytes, |
| &cur_ps->eth.tx_bytes); |
| |
| ice_stat_update40(hw, GLPRT_UPTCL(port), pf->stat_prev_loaded, |
| &prev_ps->eth.tx_unicast, |
| &cur_ps->eth.tx_unicast); |
| |
| ice_stat_update40(hw, GLPRT_MPTCL(port), pf->stat_prev_loaded, |
| &prev_ps->eth.tx_multicast, |
| &cur_ps->eth.tx_multicast); |
| |
| ice_stat_update40(hw, GLPRT_BPTCL(port), pf->stat_prev_loaded, |
| &prev_ps->eth.tx_broadcast, |
| &cur_ps->eth.tx_broadcast); |
| |
| ice_stat_update32(hw, GLPRT_TDOLD(port), pf->stat_prev_loaded, |
| &prev_ps->tx_dropped_link_down, |
| &cur_ps->tx_dropped_link_down); |
| |
| ice_stat_update40(hw, GLPRT_PRC64L(port), pf->stat_prev_loaded, |
| &prev_ps->rx_size_64, &cur_ps->rx_size_64); |
| |
| ice_stat_update40(hw, GLPRT_PRC127L(port), pf->stat_prev_loaded, |
| &prev_ps->rx_size_127, &cur_ps->rx_size_127); |
| |
| ice_stat_update40(hw, GLPRT_PRC255L(port), pf->stat_prev_loaded, |
| &prev_ps->rx_size_255, &cur_ps->rx_size_255); |
| |
| ice_stat_update40(hw, GLPRT_PRC511L(port), pf->stat_prev_loaded, |
| &prev_ps->rx_size_511, &cur_ps->rx_size_511); |
| |
| ice_stat_update40(hw, GLPRT_PRC1023L(port), pf->stat_prev_loaded, |
| &prev_ps->rx_size_1023, &cur_ps->rx_size_1023); |
| |
| ice_stat_update40(hw, GLPRT_PRC1522L(port), pf->stat_prev_loaded, |
| &prev_ps->rx_size_1522, &cur_ps->rx_size_1522); |
| |
| ice_stat_update40(hw, GLPRT_PRC9522L(port), pf->stat_prev_loaded, |
| &prev_ps->rx_size_big, &cur_ps->rx_size_big); |
| |
| ice_stat_update40(hw, GLPRT_PTC64L(port), pf->stat_prev_loaded, |
| &prev_ps->tx_size_64, &cur_ps->tx_size_64); |
| |
| ice_stat_update40(hw, GLPRT_PTC127L(port), pf->stat_prev_loaded, |
| &prev_ps->tx_size_127, &cur_ps->tx_size_127); |
| |
| ice_stat_update40(hw, GLPRT_PTC255L(port), pf->stat_prev_loaded, |
| &prev_ps->tx_size_255, &cur_ps->tx_size_255); |
| |
| ice_stat_update40(hw, GLPRT_PTC511L(port), pf->stat_prev_loaded, |
| &prev_ps->tx_size_511, &cur_ps->tx_size_511); |
| |
| ice_stat_update40(hw, GLPRT_PTC1023L(port), pf->stat_prev_loaded, |
| &prev_ps->tx_size_1023, &cur_ps->tx_size_1023); |
| |
| ice_stat_update40(hw, GLPRT_PTC1522L(port), pf->stat_prev_loaded, |
| &prev_ps->tx_size_1522, &cur_ps->tx_size_1522); |
| |
| ice_stat_update40(hw, GLPRT_PTC9522L(port), pf->stat_prev_loaded, |
| &prev_ps->tx_size_big, &cur_ps->tx_size_big); |
| |
| fd_ctr_base = hw->fd_ctr_base; |
| |
| ice_stat_update40(hw, |
| GLSTAT_FD_CNT0L(ICE_FD_SB_STAT_IDX(fd_ctr_base)), |
| pf->stat_prev_loaded, &prev_ps->fd_sb_match, |
| &cur_ps->fd_sb_match); |
| ice_stat_update32(hw, GLPRT_LXONRXC(port), pf->stat_prev_loaded, |
| &prev_ps->link_xon_rx, &cur_ps->link_xon_rx); |
| |
| ice_stat_update32(hw, GLPRT_LXOFFRXC(port), pf->stat_prev_loaded, |
| &prev_ps->link_xoff_rx, &cur_ps->link_xoff_rx); |
| |
| ice_stat_update32(hw, GLPRT_LXONTXC(port), pf->stat_prev_loaded, |
| &prev_ps->link_xon_tx, &cur_ps->link_xon_tx); |
| |
| ice_stat_update32(hw, GLPRT_LXOFFTXC(port), pf->stat_prev_loaded, |
| &prev_ps->link_xoff_tx, &cur_ps->link_xoff_tx); |
| |
| ice_update_dcb_stats(pf); |
| |
| ice_stat_update32(hw, GLPRT_CRCERRS(port), pf->stat_prev_loaded, |
| &prev_ps->crc_errors, &cur_ps->crc_errors); |
| |
| ice_stat_update32(hw, GLPRT_ILLERRC(port), pf->stat_prev_loaded, |
| &prev_ps->illegal_bytes, &cur_ps->illegal_bytes); |
| |
| ice_stat_update32(hw, GLPRT_MLFC(port), pf->stat_prev_loaded, |
| &prev_ps->mac_local_faults, |
| &cur_ps->mac_local_faults); |
| |
| ice_stat_update32(hw, GLPRT_MRFC(port), pf->stat_prev_loaded, |
| &prev_ps->mac_remote_faults, |
| &cur_ps->mac_remote_faults); |
| |
| ice_stat_update32(hw, GLPRT_RLEC(port), pf->stat_prev_loaded, |
| &prev_ps->rx_len_errors, &cur_ps->rx_len_errors); |
| |
| ice_stat_update32(hw, GLPRT_RUC(port), pf->stat_prev_loaded, |
| &prev_ps->rx_undersize, &cur_ps->rx_undersize); |
| |
| ice_stat_update32(hw, GLPRT_RFC(port), pf->stat_prev_loaded, |
| &prev_ps->rx_fragments, &cur_ps->rx_fragments); |
| |
| ice_stat_update32(hw, GLPRT_ROC(port), pf->stat_prev_loaded, |
| &prev_ps->rx_oversize, &cur_ps->rx_oversize); |
| |
| ice_stat_update32(hw, GLPRT_RJC(port), pf->stat_prev_loaded, |
| &prev_ps->rx_jabber, &cur_ps->rx_jabber); |
| |
| cur_ps->fd_sb_status = test_bit(ICE_FLAG_FD_ENA, pf->flags) ? 1 : 0; |
| |
| pf->stat_prev_loaded = true; |
| } |
| |
| /** |
| * ice_get_stats64 - get statistics for network device structure |
| * @netdev: network interface device structure |
| * @stats: main device statistics structure |
| */ |
| static |
| void ice_get_stats64(struct net_device *netdev, struct rtnl_link_stats64 *stats) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct rtnl_link_stats64 *vsi_stats; |
| struct ice_vsi *vsi = np->vsi; |
| |
| vsi_stats = &vsi->net_stats; |
| |
| if (!vsi->num_txq || !vsi->num_rxq) |
| return; |
| |
| /* netdev packet/byte stats come from ring counter. These are obtained |
| * by summing up ring counters (done by ice_update_vsi_ring_stats). |
| * But, only call the update routine and read the registers if VSI is |
| * not down. |
| */ |
| if (!test_bit(ICE_VSI_DOWN, vsi->state)) |
| ice_update_vsi_ring_stats(vsi); |
| stats->tx_packets = vsi_stats->tx_packets; |
| stats->tx_bytes = vsi_stats->tx_bytes; |
| stats->rx_packets = vsi_stats->rx_packets; |
| stats->rx_bytes = vsi_stats->rx_bytes; |
| |
| /* The rest of the stats can be read from the hardware but instead we |
| * just return values that the watchdog task has already obtained from |
| * the hardware. |
| */ |
| stats->multicast = vsi_stats->multicast; |
| stats->tx_errors = vsi_stats->tx_errors; |
| stats->tx_dropped = vsi_stats->tx_dropped; |
| stats->rx_errors = vsi_stats->rx_errors; |
| stats->rx_dropped = vsi_stats->rx_dropped; |
| stats->rx_crc_errors = vsi_stats->rx_crc_errors; |
| stats->rx_length_errors = vsi_stats->rx_length_errors; |
| } |
| |
| /** |
| * ice_napi_disable_all - Disable NAPI for all q_vectors in the VSI |
| * @vsi: VSI having NAPI disabled |
| */ |
| static void ice_napi_disable_all(struct ice_vsi *vsi) |
| { |
| int q_idx; |
| |
| if (!vsi->netdev) |
| return; |
| |
| ice_for_each_q_vector(vsi, q_idx) { |
| struct ice_q_vector *q_vector = vsi->q_vectors[q_idx]; |
| |
| if (q_vector->rx.rx_ring || q_vector->tx.tx_ring) |
| napi_disable(&q_vector->napi); |
| |
| cancel_work_sync(&q_vector->tx.dim.work); |
| cancel_work_sync(&q_vector->rx.dim.work); |
| } |
| } |
| |
| /** |
| * ice_down - Shutdown the connection |
| * @vsi: The VSI being stopped |
| * |
| * Caller of this function is expected to set the vsi->state ICE_DOWN bit |
| */ |
| int ice_down(struct ice_vsi *vsi) |
| { |
| int i, tx_err, rx_err, vlan_err = 0; |
| |
| WARN_ON(!test_bit(ICE_VSI_DOWN, vsi->state)); |
| |
| if (vsi->netdev && vsi->type == ICE_VSI_PF) { |
| vlan_err = ice_vsi_del_vlan_zero(vsi); |
| ice_ptp_link_change(vsi->back, vsi->back->hw.pf_id, false); |
| netif_carrier_off(vsi->netdev); |
| netif_tx_disable(vsi->netdev); |
| } else if (vsi->type == ICE_VSI_SWITCHDEV_CTRL) { |
| ice_eswitch_stop_all_tx_queues(vsi->back); |
| } |
| |
| ice_vsi_dis_irq(vsi); |
| |
| tx_err = ice_vsi_stop_lan_tx_rings(vsi, ICE_NO_RESET, 0); |
| if (tx_err) |
| netdev_err(vsi->netdev, "Failed stop Tx rings, VSI %d error %d\n", |
| vsi->vsi_num, tx_err); |
| if (!tx_err && ice_is_xdp_ena_vsi(vsi)) { |
| tx_err = ice_vsi_stop_xdp_tx_rings(vsi); |
| if (tx_err) |
| netdev_err(vsi->netdev, "Failed stop XDP rings, VSI %d error %d\n", |
| vsi->vsi_num, tx_err); |
| } |
| |
| rx_err = ice_vsi_stop_all_rx_rings(vsi); |
| if (rx_err) |
| netdev_err(vsi->netdev, "Failed stop Rx rings, VSI %d error %d\n", |
| vsi->vsi_num, rx_err); |
| |
| ice_napi_disable_all(vsi); |
| |
| ice_for_each_txq(vsi, i) |
| ice_clean_tx_ring(vsi->tx_rings[i]); |
| |
| ice_for_each_rxq(vsi, i) |
| ice_clean_rx_ring(vsi->rx_rings[i]); |
| |
| if (tx_err || rx_err || vlan_err) { |
| netdev_err(vsi->netdev, "Failed to close VSI 0x%04X on switch 0x%04X\n", |
| vsi->vsi_num, vsi->vsw->sw_id); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_down_up - shutdown the VSI connection and bring it up |
| * @vsi: the VSI to be reconnected |
| */ |
| int ice_down_up(struct ice_vsi *vsi) |
| { |
| int ret; |
| |
| /* if DOWN already set, nothing to do */ |
| if (test_and_set_bit(ICE_VSI_DOWN, vsi->state)) |
| return 0; |
| |
| ret = ice_down(vsi); |
| if (ret) |
| return ret; |
| |
| ret = ice_up(vsi); |
| if (ret) { |
| netdev_err(vsi->netdev, "reallocating resources failed during netdev features change, may need to reload driver\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_vsi_setup_tx_rings - Allocate VSI Tx queue resources |
| * @vsi: VSI having resources allocated |
| * |
| * Return 0 on success, negative on failure |
| */ |
| int ice_vsi_setup_tx_rings(struct ice_vsi *vsi) |
| { |
| int i, err = 0; |
| |
| if (!vsi->num_txq) { |
| dev_err(ice_pf_to_dev(vsi->back), "VSI %d has 0 Tx queues\n", |
| vsi->vsi_num); |
| return -EINVAL; |
| } |
| |
| ice_for_each_txq(vsi, i) { |
| struct ice_tx_ring *ring = vsi->tx_rings[i]; |
| |
| if (!ring) |
| return -EINVAL; |
| |
| if (vsi->netdev) |
| ring->netdev = vsi->netdev; |
| err = ice_setup_tx_ring(ring); |
| if (err) |
| break; |
| } |
| |
| return err; |
| } |
| |
| /** |
| * ice_vsi_setup_rx_rings - Allocate VSI Rx queue resources |
| * @vsi: VSI having resources allocated |
| * |
| * Return 0 on success, negative on failure |
| */ |
| int ice_vsi_setup_rx_rings(struct ice_vsi *vsi) |
| { |
| int i, err = 0; |
| |
| if (!vsi->num_rxq) { |
| dev_err(ice_pf_to_dev(vsi->back), "VSI %d has 0 Rx queues\n", |
| vsi->vsi_num); |
| return -EINVAL; |
| } |
| |
| ice_for_each_rxq(vsi, i) { |
| struct ice_rx_ring *ring = vsi->rx_rings[i]; |
| |
| if (!ring) |
| return -EINVAL; |
| |
| if (vsi->netdev) |
| ring->netdev = vsi->netdev; |
| err = ice_setup_rx_ring(ring); |
| if (err) |
| break; |
| } |
| |
| return err; |
| } |
| |
| /** |
| * ice_vsi_open_ctrl - open control VSI for use |
| * @vsi: the VSI to open |
| * |
| * Initialization of the Control VSI |
| * |
| * Returns 0 on success, negative value on error |
| */ |
| int ice_vsi_open_ctrl(struct ice_vsi *vsi) |
| { |
| char int_name[ICE_INT_NAME_STR_LEN]; |
| struct ice_pf *pf = vsi->back; |
| struct device *dev; |
| int err; |
| |
| dev = ice_pf_to_dev(pf); |
| /* allocate descriptors */ |
| err = ice_vsi_setup_tx_rings(vsi); |
| if (err) |
| goto err_setup_tx; |
| |
| err = ice_vsi_setup_rx_rings(vsi); |
| if (err) |
| goto err_setup_rx; |
| |
| err = ice_vsi_cfg(vsi); |
| if (err) |
| goto err_setup_rx; |
| |
| snprintf(int_name, sizeof(int_name) - 1, "%s-%s:ctrl", |
| dev_driver_string(dev), dev_name(dev)); |
| err = ice_vsi_req_irq_msix(vsi, int_name); |
| if (err) |
| goto err_setup_rx; |
| |
| ice_vsi_cfg_msix(vsi); |
| |
| err = ice_vsi_start_all_rx_rings(vsi); |
| if (err) |
| goto err_up_complete; |
| |
| clear_bit(ICE_VSI_DOWN, vsi->state); |
| ice_vsi_ena_irq(vsi); |
| |
| return 0; |
| |
| err_up_complete: |
| ice_down(vsi); |
| err_setup_rx: |
| ice_vsi_free_rx_rings(vsi); |
| err_setup_tx: |
| ice_vsi_free_tx_rings(vsi); |
| |
| return err; |
| } |
| |
| /** |
| * ice_vsi_open - Called when a network interface is made active |
| * @vsi: the VSI to open |
| * |
| * Initialization of the VSI |
| * |
| * Returns 0 on success, negative value on error |
| */ |
| int ice_vsi_open(struct ice_vsi *vsi) |
| { |
| char int_name[ICE_INT_NAME_STR_LEN]; |
| struct ice_pf *pf = vsi->back; |
| int err; |
| |
| /* allocate descriptors */ |
| err = ice_vsi_setup_tx_rings(vsi); |
| if (err) |
| goto err_setup_tx; |
| |
| err = ice_vsi_setup_rx_rings(vsi); |
| if (err) |
| goto err_setup_rx; |
| |
| err = ice_vsi_cfg(vsi); |
| if (err) |
| goto err_setup_rx; |
| |
| snprintf(int_name, sizeof(int_name) - 1, "%s-%s", |
| dev_driver_string(ice_pf_to_dev(pf)), vsi->netdev->name); |
| err = ice_vsi_req_irq_msix(vsi, int_name); |
| if (err) |
| goto err_setup_rx; |
| |
| ice_vsi_cfg_netdev_tc(vsi, vsi->tc_cfg.ena_tc); |
| |
| if (vsi->type == ICE_VSI_PF) { |
| /* Notify the stack of the actual queue counts. */ |
| err = netif_set_real_num_tx_queues(vsi->netdev, vsi->num_txq); |
| if (err) |
| goto err_set_qs; |
| |
| err = netif_set_real_num_rx_queues(vsi->netdev, vsi->num_rxq); |
| if (err) |
| goto err_set_qs; |
| } |
| |
| err = ice_up_complete(vsi); |
| if (err) |
| goto err_up_complete; |
| |
| return 0; |
| |
| err_up_complete: |
| ice_down(vsi); |
| err_set_qs: |
| ice_vsi_free_irq(vsi); |
| err_setup_rx: |
| ice_vsi_free_rx_rings(vsi); |
| err_setup_tx: |
| ice_vsi_free_tx_rings(vsi); |
| |
| return err; |
| } |
| |
| /** |
| * ice_vsi_release_all - Delete all VSIs |
| * @pf: PF from which all VSIs are being removed |
| */ |
| static void ice_vsi_release_all(struct ice_pf *pf) |
| { |
| int err, i; |
| |
| if (!pf->vsi) |
| return; |
| |
| ice_for_each_vsi(pf, i) { |
| if (!pf->vsi[i]) |
| continue; |
| |
| if (pf->vsi[i]->type == ICE_VSI_CHNL) |
| continue; |
| |
| err = ice_vsi_release(pf->vsi[i]); |
| if (err) |
| dev_dbg(ice_pf_to_dev(pf), "Failed to release pf->vsi[%d], err %d, vsi_num = %d\n", |
| i, err, pf->vsi[i]->vsi_num); |
| } |
| } |
| |
| /** |
| * ice_vsi_rebuild_by_type - Rebuild VSI of a given type |
| * @pf: pointer to the PF instance |
| * @type: VSI type to rebuild |
| * |
| * Iterates through the pf->vsi array and rebuilds VSIs of the requested type |
| */ |
| static int ice_vsi_rebuild_by_type(struct ice_pf *pf, enum ice_vsi_type type) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| int i, err; |
| |
| ice_for_each_vsi(pf, i) { |
| struct ice_vsi *vsi = pf->vsi[i]; |
| |
| if (!vsi || vsi->type != type) |
| continue; |
| |
| /* rebuild the VSI */ |
| err = ice_vsi_rebuild(vsi, true); |
| if (err) { |
| dev_err(dev, "rebuild VSI failed, err %d, VSI index %d, type %s\n", |
| err, vsi->idx, ice_vsi_type_str(type)); |
| return err; |
| } |
| |
| /* replay filters for the VSI */ |
| err = ice_replay_vsi(&pf->hw, vsi->idx); |
| if (err) { |
| dev_err(dev, "replay VSI failed, error %d, VSI index %d, type %s\n", |
| err, vsi->idx, ice_vsi_type_str(type)); |
| return err; |
| } |
| |
| /* Re-map HW VSI number, using VSI handle that has been |
| * previously validated in ice_replay_vsi() call above |
| */ |
| vsi->vsi_num = ice_get_hw_vsi_num(&pf->hw, vsi->idx); |
| |
| /* enable the VSI */ |
| err = ice_ena_vsi(vsi, false); |
| if (err) { |
| dev_err(dev, "enable VSI failed, err %d, VSI index %d, type %s\n", |
| err, vsi->idx, ice_vsi_type_str(type)); |
| return err; |
| } |
| |
| dev_info(dev, "VSI rebuilt. VSI index %d, type %s\n", vsi->idx, |
| ice_vsi_type_str(type)); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_update_pf_netdev_link - Update PF netdev link status |
| * @pf: pointer to the PF instance |
| */ |
| static void ice_update_pf_netdev_link(struct ice_pf *pf) |
| { |
| bool link_up; |
| int i; |
| |
| ice_for_each_vsi(pf, i) { |
| struct ice_vsi *vsi = pf->vsi[i]; |
| |
| if (!vsi || vsi->type != ICE_VSI_PF) |
| return; |
| |
| ice_get_link_status(pf->vsi[i]->port_info, &link_up); |
| if (link_up) { |
| netif_carrier_on(pf->vsi[i]->netdev); |
| netif_tx_wake_all_queues(pf->vsi[i]->netdev); |
| } else { |
| netif_carrier_off(pf->vsi[i]->netdev); |
| netif_tx_stop_all_queues(pf->vsi[i]->netdev); |
| } |
| } |
| } |
| |
| /** |
| * ice_rebuild - rebuild after reset |
| * @pf: PF to rebuild |
| * @reset_type: type of reset |
| * |
| * Do not rebuild VF VSI in this flow because that is already handled via |
| * ice_reset_all_vfs(). This is because requirements for resetting a VF after a |
| * PFR/CORER/GLOBER/etc. are different than the normal flow. Also, we don't want |
| * to reset/rebuild all the VF VSI twice. |
| */ |
| static void ice_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| struct ice_hw *hw = &pf->hw; |
| bool dvm; |
| int err; |
| |
| if (test_bit(ICE_DOWN, pf->state)) |
| goto clear_recovery; |
| |
| dev_dbg(dev, "rebuilding PF after reset_type=%d\n", reset_type); |
| |
| #define ICE_EMP_RESET_SLEEP_MS 5000 |
| if (reset_type == ICE_RESET_EMPR) { |
| /* If an EMP reset has occurred, any previously pending flash |
| * update will have completed. We no longer know whether or |
| * not the NVM update EMP reset is restricted. |
| */ |
| pf->fw_emp_reset_disabled = false; |
| |
| msleep(ICE_EMP_RESET_SLEEP_MS); |
| } |
| |
| err = ice_init_all_ctrlq(hw); |
| if (err) { |
| dev_err(dev, "control queues init failed %d\n", err); |
| goto err_init_ctrlq; |
| } |
| |
| /* if DDP was previously loaded successfully */ |
| if (!ice_is_safe_mode(pf)) { |
| /* reload the SW DB of filter tables */ |
| if (reset_type == ICE_RESET_PFR) |
| ice_fill_blk_tbls(hw); |
| else |
| /* Reload DDP Package after CORER/GLOBR reset */ |
| ice_load_pkg(NULL, pf); |
| } |
| |
| err = ice_clear_pf_cfg(hw); |
| if (err) { |
| dev_err(dev, "clear PF configuration failed %d\n", err); |
| goto err_init_ctrlq; |
| } |
| |
| ice_clear_pxe_mode(hw); |
| |
| err = ice_init_nvm(hw); |
| if (err) { |
| dev_err(dev, "ice_init_nvm failed %d\n", err); |
| goto err_init_ctrlq; |
| } |
| |
| err = ice_get_caps(hw); |
| if (err) { |
| dev_err(dev, "ice_get_caps failed %d\n", err); |
| goto err_init_ctrlq; |
| } |
| |
| err = ice_aq_set_mac_cfg(hw, ICE_AQ_SET_MAC_FRAME_SIZE_MAX, NULL); |
| if (err) { |
| dev_err(dev, "set_mac_cfg failed %d\n", err); |
| goto err_init_ctrlq; |
| } |
| |
| dvm = ice_is_dvm_ena(hw); |
| |
| err = ice_aq_set_port_params(pf->hw.port_info, dvm, NULL); |
| if (err) |
| goto err_init_ctrlq; |
| |
| err = ice_sched_init_port(hw->port_info); |
| if (err) |
| goto err_sched_init_port; |
| |
| /* start misc vector */ |
| err = ice_req_irq_msix_misc(pf); |
| if (err) { |
| dev_err(dev, "misc vector setup failed: %d\n", err); |
| goto err_sched_init_port; |
| } |
| |
| if (test_bit(ICE_FLAG_FD_ENA, pf->flags)) { |
| wr32(hw, PFQF_FD_ENA, PFQF_FD_ENA_FD_ENA_M); |
| if (!rd32(hw, PFQF_FD_SIZE)) { |
| u16 unused, guar, b_effort; |
| |
| guar = hw->func_caps.fd_fltr_guar; |
| b_effort = hw->func_caps.fd_fltr_best_effort; |
| |
| /* force guaranteed filter pool for PF */ |
| ice_alloc_fd_guar_item(hw, &unused, guar); |
| /* force shared filter pool for PF */ |
| ice_alloc_fd_shrd_item(hw, &unused, b_effort); |
| } |
| } |
| |
| if (test_bit(ICE_FLAG_DCB_ENA, pf->flags)) |
| ice_dcb_rebuild(pf); |
| |
| /* If the PF previously had enabled PTP, PTP init needs to happen before |
| * the VSI rebuild. If not, this causes the PTP link status events to |
| * fail. |
| */ |
| if (test_bit(ICE_FLAG_PTP_SUPPORTED, pf->flags)) |
| ice_ptp_reset(pf); |
| |
| if (ice_is_feature_supported(pf, ICE_F_GNSS)) |
| ice_gnss_init(pf); |
| |
| /* rebuild PF VSI */ |
| err = ice_vsi_rebuild_by_type(pf, ICE_VSI_PF); |
| if (err) { |
| dev_err(dev, "PF VSI rebuild failed: %d\n", err); |
| goto err_vsi_rebuild; |
| } |
| |
| /* configure PTP timestamping after VSI rebuild */ |
| if (test_bit(ICE_FLAG_PTP_SUPPORTED, pf->flags)) |
| ice_ptp_cfg_timestamp(pf, false); |
| |
| err = ice_vsi_rebuild_by_type(pf, ICE_VSI_SWITCHDEV_CTRL); |
| if (err) { |
| dev_err(dev, "Switchdev CTRL VSI rebuild failed: %d\n", err); |
| goto err_vsi_rebuild; |
| } |
| |
| if (reset_type == ICE_RESET_PFR) { |
| err = ice_rebuild_channels(pf); |
| if (err) { |
| dev_err(dev, "failed to rebuild and replay ADQ VSIs, err %d\n", |
| err); |
| goto err_vsi_rebuild; |
| } |
| } |
| |
| /* If Flow Director is active */ |
| if (test_bit(ICE_FLAG_FD_ENA, pf->flags)) { |
| err = ice_vsi_rebuild_by_type(pf, ICE_VSI_CTRL); |
| if (err) { |
| dev_err(dev, "control VSI rebuild failed: %d\n", err); |
| goto err_vsi_rebuild; |
| } |
| |
| /* replay HW Flow Director recipes */ |
| if (hw->fdir_prof) |
| ice_fdir_replay_flows(hw); |
| |
| /* replay Flow Director filters */ |
| ice_fdir_replay_fltrs(pf); |
| |
| ice_rebuild_arfs(pf); |
| } |
| |
| ice_update_pf_netdev_link(pf); |
| |
| /* tell the firmware we are up */ |
| err = ice_send_version(pf); |
| if (err) { |
| dev_err(dev, "Rebuild failed due to error sending driver version: %d\n", |
| err); |
| goto err_vsi_rebuild; |
| } |
| |
| ice_replay_post(hw); |
| |
| /* if we get here, reset flow is successful */ |
| clear_bit(ICE_RESET_FAILED, pf->state); |
| |
| ice_plug_aux_dev(pf); |
| return; |
| |
| err_vsi_rebuild: |
| err_sched_init_port: |
| ice_sched_cleanup_all(hw); |
| err_init_ctrlq: |
| ice_shutdown_all_ctrlq(hw); |
| set_bit(ICE_RESET_FAILED, pf->state); |
| clear_recovery: |
| /* set this bit in PF state to control service task scheduling */ |
| set_bit(ICE_NEEDS_RESTART, pf->state); |
| dev_err(dev, "Rebuild failed, unload and reload driver\n"); |
| } |
| |
| /** |
| * ice_max_xdp_frame_size - returns the maximum allowed frame size for XDP |
| * @vsi: Pointer to VSI structure |
| */ |
| static int ice_max_xdp_frame_size(struct ice_vsi *vsi) |
| { |
| if (PAGE_SIZE >= 8192 || test_bit(ICE_FLAG_LEGACY_RX, vsi->back->flags)) |
| return ICE_RXBUF_2048 - XDP_PACKET_HEADROOM; |
| else |
| return ICE_RXBUF_3072; |
| } |
| |
| /** |
| * ice_change_mtu - NDO callback to change the MTU |
| * @netdev: network interface device structure |
| * @new_mtu: new value for maximum frame size |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int ice_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| struct ice_pf *pf = vsi->back; |
| u8 count = 0; |
| int err = 0; |
| |
| if (new_mtu == (int)netdev->mtu) { |
| netdev_warn(netdev, "MTU is already %u\n", netdev->mtu); |
| return 0; |
| } |
| |
| if (ice_is_xdp_ena_vsi(vsi)) { |
| int frame_size = ice_max_xdp_frame_size(vsi); |
| |
| if (new_mtu + ICE_ETH_PKT_HDR_PAD > frame_size) { |
| netdev_err(netdev, "max MTU for XDP usage is %d\n", |
| frame_size - ICE_ETH_PKT_HDR_PAD); |
| return -EINVAL; |
| } |
| } |
| |
| /* if a reset is in progress, wait for some time for it to complete */ |
| do { |
| if (ice_is_reset_in_progress(pf->state)) { |
| count++; |
| usleep_range(1000, 2000); |
| } else { |
| break; |
| } |
| |
| } while (count < 100); |
| |
| if (count == 100) { |
| netdev_err(netdev, "can't change MTU. Device is busy\n"); |
| return -EBUSY; |
| } |
| |
| netdev->mtu = (unsigned int)new_mtu; |
| |
| /* if VSI is up, bring it down and then back up */ |
| if (!test_and_set_bit(ICE_VSI_DOWN, vsi->state)) { |
| err = ice_down(vsi); |
| if (err) { |
| netdev_err(netdev, "change MTU if_down err %d\n", err); |
| return err; |
| } |
| |
| err = ice_up(vsi); |
| if (err) { |
| netdev_err(netdev, "change MTU if_up err %d\n", err); |
| return err; |
| } |
| } |
| |
| netdev_dbg(netdev, "changed MTU to %d\n", new_mtu); |
| set_bit(ICE_FLAG_MTU_CHANGED, pf->flags); |
| |
| return err; |
| } |
| |
| /** |
| * ice_eth_ioctl - Access the hwtstamp interface |
| * @netdev: network interface device structure |
| * @ifr: interface request data |
| * @cmd: ioctl command |
| */ |
| static int ice_eth_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_pf *pf = np->vsi->back; |
| |
| switch (cmd) { |
| case SIOCGHWTSTAMP: |
| return ice_ptp_get_ts_config(pf, ifr); |
| case SIOCSHWTSTAMP: |
| return ice_ptp_set_ts_config(pf, ifr); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| /** |
| * ice_aq_str - convert AQ err code to a string |
| * @aq_err: the AQ error code to convert |
| */ |
| const char *ice_aq_str(enum ice_aq_err aq_err) |
| { |
| switch (aq_err) { |
| case ICE_AQ_RC_OK: |
| return "OK"; |
| case ICE_AQ_RC_EPERM: |
| return "ICE_AQ_RC_EPERM"; |
| case ICE_AQ_RC_ENOENT: |
| return "ICE_AQ_RC_ENOENT"; |
| case ICE_AQ_RC_ENOMEM: |
| return "ICE_AQ_RC_ENOMEM"; |
| case ICE_AQ_RC_EBUSY: |
| return "ICE_AQ_RC_EBUSY"; |
| case ICE_AQ_RC_EEXIST: |
| return "ICE_AQ_RC_EEXIST"; |
| case ICE_AQ_RC_EINVAL: |
| return "ICE_AQ_RC_EINVAL"; |
| case ICE_AQ_RC_ENOSPC: |
| return "ICE_AQ_RC_ENOSPC"; |
| case ICE_AQ_RC_ENOSYS: |
| return "ICE_AQ_RC_ENOSYS"; |
| case ICE_AQ_RC_EMODE: |
| return "ICE_AQ_RC_EMODE"; |
| case ICE_AQ_RC_ENOSEC: |
| return "ICE_AQ_RC_ENOSEC"; |
| case ICE_AQ_RC_EBADSIG: |
| return "ICE_AQ_RC_EBADSIG"; |
| case ICE_AQ_RC_ESVN: |
| return "ICE_AQ_RC_ESVN"; |
| case ICE_AQ_RC_EBADMAN: |
| return "ICE_AQ_RC_EBADMAN"; |
| case ICE_AQ_RC_EBADBUF: |
| return "ICE_AQ_RC_EBADBUF"; |
| } |
| |
| return "ICE_AQ_RC_UNKNOWN"; |
| } |
| |
| /** |
| * ice_set_rss_lut - Set RSS LUT |
| * @vsi: Pointer to VSI structure |
| * @lut: Lookup table |
| * @lut_size: Lookup table size |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| int ice_set_rss_lut(struct ice_vsi *vsi, u8 *lut, u16 lut_size) |
| { |
| struct ice_aq_get_set_rss_lut_params params = {}; |
| struct ice_hw *hw = &vsi->back->hw; |
| int status; |
| |
| if (!lut) |
| return -EINVAL; |
| |
| params.vsi_handle = vsi->idx; |
| params.lut_size = lut_size; |
| params.lut_type = vsi->rss_lut_type; |
| params.lut = lut; |
| |
| status = ice_aq_set_rss_lut(hw, ¶ms); |
| if (status) |
| dev_err(ice_pf_to_dev(vsi->back), "Cannot set RSS lut, err %d aq_err %s\n", |
| status, ice_aq_str(hw->adminq.sq_last_status)); |
| |
| return status; |
| } |
| |
| /** |
| * ice_set_rss_key - Set RSS key |
| * @vsi: Pointer to the VSI structure |
| * @seed: RSS hash seed |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| int ice_set_rss_key(struct ice_vsi *vsi, u8 *seed) |
| { |
| struct ice_hw *hw = &vsi->back->hw; |
| int status; |
| |
| if (!seed) |
| return -EINVAL; |
| |
| status = ice_aq_set_rss_key(hw, vsi->idx, (struct ice_aqc_get_set_rss_keys *)seed); |
| if (status) |
| dev_err(ice_pf_to_dev(vsi->back), "Cannot set RSS key, err %d aq_err %s\n", |
| status, ice_aq_str(hw->adminq.sq_last_status)); |
| |
| return status; |
| } |
| |
| /** |
| * ice_get_rss_lut - Get RSS LUT |
| * @vsi: Pointer to VSI structure |
| * @lut: Buffer to store the lookup table entries |
| * @lut_size: Size of buffer to store the lookup table entries |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| int ice_get_rss_lut(struct ice_vsi *vsi, u8 *lut, u16 lut_size) |
| { |
| struct ice_aq_get_set_rss_lut_params params = {}; |
| struct ice_hw *hw = &vsi->back->hw; |
| int status; |
| |
| if (!lut) |
| return -EINVAL; |
| |
| params.vsi_handle = vsi->idx; |
| params.lut_size = lut_size; |
| params.lut_type = vsi->rss_lut_type; |
| params.lut = lut; |
| |
| status = ice_aq_get_rss_lut(hw, ¶ms); |
| if (status) |
| dev_err(ice_pf_to_dev(vsi->back), "Cannot get RSS lut, err %d aq_err %s\n", |
| status, ice_aq_str(hw->adminq.sq_last_status)); |
| |
| return status; |
| } |
| |
| /** |
| * ice_get_rss_key - Get RSS key |
| * @vsi: Pointer to VSI structure |
| * @seed: Buffer to store the key in |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| int ice_get_rss_key(struct ice_vsi *vsi, u8 *seed) |
| { |
| struct ice_hw *hw = &vsi->back->hw; |
| int status; |
| |
| if (!seed) |
| return -EINVAL; |
| |
| status = ice_aq_get_rss_key(hw, vsi->idx, (struct ice_aqc_get_set_rss_keys *)seed); |
| if (status) |
| dev_err(ice_pf_to_dev(vsi->back), "Cannot get RSS key, err %d aq_err %s\n", |
| status, ice_aq_str(hw->adminq.sq_last_status)); |
| |
| return status; |
| } |
| |
| /** |
| * ice_bridge_getlink - Get the hardware bridge mode |
| * @skb: skb buff |
| * @pid: process ID |
| * @seq: RTNL message seq |
| * @dev: the netdev being configured |
| * @filter_mask: filter mask passed in |
| * @nlflags: netlink flags passed in |
| * |
| * Return the bridge mode (VEB/VEPA) |
| */ |
| static int |
| ice_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, |
| struct net_device *dev, u32 filter_mask, int nlflags) |
| { |
| struct ice_netdev_priv *np = netdev_priv(dev); |
| struct ice_vsi *vsi = np->vsi; |
| struct ice_pf *pf = vsi->back; |
| u16 bmode; |
| |
| bmode = pf->first_sw->bridge_mode; |
| |
| return ndo_dflt_bridge_getlink(skb, pid, seq, dev, bmode, 0, 0, nlflags, |
| filter_mask, NULL); |
| } |
| |
| /** |
| * ice_vsi_update_bridge_mode - Update VSI for switching bridge mode (VEB/VEPA) |
| * @vsi: Pointer to VSI structure |
| * @bmode: Hardware bridge mode (VEB/VEPA) |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int ice_vsi_update_bridge_mode(struct ice_vsi *vsi, u16 bmode) |
| { |
| struct ice_aqc_vsi_props *vsi_props; |
| struct ice_hw *hw = &vsi->back->hw; |
| struct ice_vsi_ctx *ctxt; |
| int ret; |
| |
| vsi_props = &vsi->info; |
| |
| ctxt = kzalloc(sizeof(*ctxt), GFP_KERNEL); |
| if (!ctxt) |
| return -ENOMEM; |
| |
| ctxt->info = vsi->info; |
| |
| if (bmode == BRIDGE_MODE_VEB) |
| /* change from VEPA to VEB mode */ |
| ctxt->info.sw_flags |= ICE_AQ_VSI_SW_FLAG_ALLOW_LB; |
| else |
| /* change from VEB to VEPA mode */ |
| ctxt->info.sw_flags &= ~ICE_AQ_VSI_SW_FLAG_ALLOW_LB; |
| ctxt->info.valid_sections = cpu_to_le16(ICE_AQ_VSI_PROP_SW_VALID); |
| |
| ret = ice_update_vsi(hw, vsi->idx, ctxt, NULL); |
| if (ret) { |
| dev_err(ice_pf_to_dev(vsi->back), "update VSI for bridge mode failed, bmode = %d err %d aq_err %s\n", |
| bmode, ret, ice_aq_str(hw->adminq.sq_last_status)); |
| goto out; |
| } |
| /* Update sw flags for book keeping */ |
| vsi_props->sw_flags = ctxt->info.sw_flags; |
| |
| out: |
| kfree(ctxt); |
| return ret; |
| } |
| |
| /** |
| * ice_bridge_setlink - Set the hardware bridge mode |
| * @dev: the netdev being configured |
| * @nlh: RTNL message |
| * @flags: bridge setlink flags |
| * @extack: netlink extended ack |
| * |
| * Sets the bridge mode (VEB/VEPA) of the switch to which the netdev (VSI) is |
| * hooked up to. Iterates through the PF VSI list and sets the loopback mode (if |
| * not already set for all VSIs connected to this switch. And also update the |
| * unicast switch filter rules for the corresponding switch of the netdev. |
| */ |
| static int |
| ice_bridge_setlink(struct net_device *dev, struct nlmsghdr *nlh, |
| u16 __always_unused flags, |
| struct netlink_ext_ack __always_unused *extack) |
| { |
| struct ice_netdev_priv *np = netdev_priv(dev); |
| struct ice_pf *pf = np->vsi->back; |
| struct nlattr *attr, *br_spec; |
| struct ice_hw *hw = &pf->hw; |
| struct ice_sw *pf_sw; |
| int rem, v, err = 0; |
| |
| pf_sw = pf->first_sw; |
| /* find the attribute in the netlink message */ |
| br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); |
| |
| nla_for_each_nested(attr, br_spec, rem) { |
| __u16 mode; |
| |
| if (nla_type(attr) != IFLA_BRIDGE_MODE) |
| continue; |
| mode = nla_get_u16(attr); |
| if (mode != BRIDGE_MODE_VEPA && mode != BRIDGE_MODE_VEB) |
| return -EINVAL; |
| /* Continue if bridge mode is not being flipped */ |
| if (mode == pf_sw->bridge_mode) |
| continue; |
| /* Iterates through the PF VSI list and update the loopback |
| * mode of the VSI |
| */ |
| ice_for_each_vsi(pf, v) { |
| if (!pf->vsi[v]) |
| continue; |
| err = ice_vsi_update_bridge_mode(pf->vsi[v], mode); |
| if (err) |
| return err; |
| } |
| |
| hw->evb_veb = (mode == BRIDGE_MODE_VEB); |
| /* Update the unicast switch filter rules for the corresponding |
| * switch of the netdev |
| */ |
| err = ice_update_sw_rule_bridge_mode(hw); |
| if (err) { |
| netdev_err(dev, "switch rule update failed, mode = %d err %d aq_err %s\n", |
| mode, err, |
| ice_aq_str(hw->adminq.sq_last_status)); |
| /* revert hw->evb_veb */ |
| hw->evb_veb = (pf_sw->bridge_mode == BRIDGE_MODE_VEB); |
| return err; |
| } |
| |
| pf_sw->bridge_mode = mode; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ice_tx_timeout - Respond to a Tx Hang |
| * @netdev: network interface device structure |
| * @txqueue: Tx queue |
| */ |
| static void ice_tx_timeout(struct net_device *netdev, unsigned int txqueue) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_tx_ring *tx_ring = NULL; |
| struct ice_vsi *vsi = np->vsi; |
| struct ice_pf *pf = vsi->back; |
| u32 i; |
| |
| pf->tx_timeout_count++; |
| |
| /* Check if PFC is enabled for the TC to which the queue belongs |
| * to. If yes then Tx timeout is not caused by a hung queue, no |
| * need to reset and rebuild |
| */ |
| if (ice_is_pfc_causing_hung_q(pf, txqueue)) { |
| dev_info(ice_pf_to_dev(pf), "Fake Tx hang detected on queue %u, timeout caused by PFC storm\n", |
| txqueue); |
| return; |
| } |
| |
| /* now that we have an index, find the tx_ring struct */ |
| ice_for_each_txq(vsi, i) |
| if (vsi->tx_rings[i] && vsi->tx_rings[i]->desc) |
| if (txqueue == vsi->tx_rings[i]->q_index) { |
| tx_ring = vsi->tx_rings[i]; |
| break; |
| } |
| |
| /* Reset recovery level if enough time has elapsed after last timeout. |
| * Also ensure no new reset action happens before next timeout period. |
| */ |
| if (time_after(jiffies, (pf->tx_timeout_last_recovery + HZ * 20))) |
| pf->tx_timeout_recovery_level = 1; |
| else if (time_before(jiffies, (pf->tx_timeout_last_recovery + |
| netdev->watchdog_timeo))) |
| return; |
| |
| if (tx_ring) { |
| struct ice_hw *hw = &pf->hw; |
| u32 head, val = 0; |
| |
| head = (rd32(hw, QTX_COMM_HEAD(vsi->txq_map[txqueue])) & |
| QTX_COMM_HEAD_HEAD_M) >> QTX_COMM_HEAD_HEAD_S; |
| /* Read interrupt register */ |
| val = rd32(hw, GLINT_DYN_CTL(tx_ring->q_vector->reg_idx)); |
| |
| netdev_info(netdev, "tx_timeout: VSI_num: %d, Q %u, NTC: 0x%x, HW_HEAD: 0x%x, NTU: 0x%x, INT: 0x%x\n", |
| vsi->vsi_num, txqueue, tx_ring->next_to_clean, |
| head, tx_ring->next_to_use, val); |
| } |
| |
| pf->tx_timeout_last_recovery = jiffies; |
| netdev_info(netdev, "tx_timeout recovery level %d, txqueue %u\n", |
| pf->tx_timeout_recovery_level, txqueue); |
| |
| switch (pf->tx_timeout_recovery_level) { |
| case 1: |
| set_bit(ICE_PFR_REQ, pf->state); |
| break; |
| case 2: |
| set_bit(ICE_CORER_REQ, pf->state); |
| break; |
| case 3: |
| set_bit(ICE_GLOBR_REQ, pf->state); |
| break; |
| default: |
| netdev_err(netdev, "tx_timeout recovery unsuccessful, device is in unrecoverable state.\n"); |
| set_bit(ICE_DOWN, pf->state); |
| set_bit(ICE_VSI_NEEDS_RESTART, vsi->state); |
| set_bit(ICE_SERVICE_DIS, pf->state); |
| break; |
| } |
| |
| ice_service_task_schedule(pf); |
| pf->tx_timeout_recovery_level++; |
| } |
| |
| /** |
| * ice_setup_tc_cls_flower - flower classifier offloads |
| * @np: net device to configure |
| * @filter_dev: device on which filter is added |
| * @cls_flower: offload data |
| */ |
| static int |
| ice_setup_tc_cls_flower(struct ice_netdev_priv *np, |
| struct net_device *filter_dev, |
| struct flow_cls_offload *cls_flower) |
| { |
| struct ice_vsi *vsi = np->vsi; |
| |
| if (cls_flower->common.chain_index) |
| return -EOPNOTSUPP; |
| |
| switch (cls_flower->command) { |
| case FLOW_CLS_REPLACE: |
| return ice_add_cls_flower(filter_dev, vsi, cls_flower); |
| case FLOW_CLS_DESTROY: |
| return ice_del_cls_flower(vsi, cls_flower); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /** |
| * ice_setup_tc_block_cb - callback handler registered for TC block |
| * @type: TC SETUP type |
| * @type_data: TC flower offload data that contains user input |
| * @cb_priv: netdev private data |
| */ |
| static int |
| ice_setup_tc_block_cb(enum tc_setup_type type, void *type_data, void *cb_priv) |
| { |
| struct ice_netdev_priv *np = cb_priv; |
| |
| switch (type) { |
| case TC_SETUP_CLSFLOWER: |
| return ice_setup_tc_cls_flower(np, np->vsi->netdev, |
| type_data); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| /** |
| * ice_validate_mqprio_qopt - Validate TCF input parameters |
| * @vsi: Pointer to VSI |
| * @mqprio_qopt: input parameters for mqprio queue configuration |
| * |
| * This function validates MQPRIO params, such as qcount (power of 2 wherever |
| * needed), and make sure user doesn't specify qcount and BW rate limit |
| * for TCs, which are more than "num_tc" |
| */ |
| static int |
| ice_validate_mqprio_qopt(struct ice_vsi *vsi, |
| struct tc_mqprio_qopt_offload *mqprio_qopt) |
| { |
| u64 sum_max_rate = 0, sum_min_rate = 0; |
| int non_power_of_2_qcount = 0; |
| struct ice_pf *pf = vsi->back; |
| int max_rss_q_cnt = 0; |
| struct device *dev; |
| int i, speed; |
| u8 num_tc; |
| |
| if (vsi->type != ICE_VSI_PF) |
| return -EINVAL; |
| |
| if (mqprio_qopt->qopt.offset[0] != 0 || |
| mqprio_qopt->qopt.num_tc < 1 || |
| mqprio_qopt->qopt.num_tc > ICE_CHNL_MAX_TC) |
| return -EINVAL; |
| |
| dev = ice_pf_to_dev(pf); |
| vsi->ch_rss_size = 0; |
| num_tc = mqprio_qopt->qopt.num_tc; |
| |
| for (i = 0; num_tc; i++) { |
| int qcount = mqprio_qopt->qopt.count[i]; |
| u64 max_rate, min_rate, rem; |
| |
| if (!qcount) |
| return -EINVAL; |
| |
| if (is_power_of_2(qcount)) { |
| if (non_power_of_2_qcount && |
| qcount > non_power_of_2_qcount) { |
| dev_err(dev, "qcount[%d] cannot be greater than non power of 2 qcount[%d]\n", |
| qcount, non_power_of_2_qcount); |
| return -EINVAL; |
| } |
| if (qcount > max_rss_q_cnt) |
| max_rss_q_cnt = qcount; |
| } else { |
| if (non_power_of_2_qcount && |
| qcount != non_power_of_2_qcount) { |
| dev_err(dev, "Only one non power of 2 qcount allowed[%d,%d]\n", |
| qcount, non_power_of_2_qcount); |
| return -EINVAL; |
| } |
| if (qcount < max_rss_q_cnt) { |
| dev_err(dev, "non power of 2 qcount[%d] cannot be less than other qcount[%d]\n", |
| qcount, max_rss_q_cnt); |
| return -EINVAL; |
| } |
| max_rss_q_cnt = qcount; |
| non_power_of_2_qcount = qcount; |
| } |
| |
| /* TC command takes input in K/N/Gbps or K/M/Gbit etc but |
| * converts the bandwidth rate limit into Bytes/s when |
| * passing it down to the driver. So convert input bandwidth |
| * from Bytes/s to Kbps |
| */ |
| max_rate = mqprio_qopt->max_rate[i]; |
| max_rate = div_u64(max_rate, ICE_BW_KBPS_DIVISOR); |
| sum_max_rate += max_rate; |
| |
| /* min_rate is minimum guaranteed rate and it can't be zero */ |
| min_rate = mqprio_qopt->min_rate[i]; |
| min_rate = div_u64(min_rate, ICE_BW_KBPS_DIVISOR); |
| sum_min_rate += min_rate; |
| |
| if (min_rate && min_rate < ICE_MIN_BW_LIMIT) { |
| dev_err(dev, "TC%d: min_rate(%llu Kbps) < %u Kbps\n", i, |
| min_rate, ICE_MIN_BW_LIMIT); |
| return -EINVAL; |
| } |
| |
| iter_div_u64_rem(min_rate, ICE_MIN_BW_LIMIT, &rem); |
| if (rem) { |
| dev_err(dev, "TC%d: Min Rate not multiple of %u Kbps", |
| i, ICE_MIN_BW_LIMIT); |
| return -EINVAL; |
| } |
| |
| iter_div_u64_rem(max_rate, ICE_MIN_BW_LIMIT, &rem); |
| if (rem) { |
| dev_err(dev, "TC%d: Max Rate not multiple of %u Kbps", |
| i, ICE_MIN_BW_LIMIT); |
| return -EINVAL; |
| } |
| |
| /* min_rate can't be more than max_rate, except when max_rate |
| * is zero (implies max_rate sought is max line rate). In such |
| * a case min_rate can be more than max. |
| */ |
| if (max_rate && min_rate > max_rate) { |
| dev_err(dev, "min_rate %llu Kbps can't be more than max_rate %llu Kbps\n", |
| min_rate, max_rate); |
| return -EINVAL; |
| } |
| |
| if (i >= mqprio_qopt->qopt.num_tc - 1) |
| break; |
| if (mqprio_qopt->qopt.offset[i + 1] != |
| (mqprio_qopt->qopt.offset[i] + qcount)) |
| return -EINVAL; |
| } |
| if (vsi->num_rxq < |
| (mqprio_qopt->qopt.offset[i] + mqprio_qopt->qopt.count[i])) |
| return -EINVAL; |
| if (vsi->num_txq < |
| (mqprio_qopt->qopt.offset[i] + mqprio_qopt->qopt.count[i])) |
| return -EINVAL; |
| |
| speed = ice_get_link_speed_kbps(vsi); |
| if (sum_max_rate && sum_max_rate > (u64)speed) { |
| dev_err(dev, "Invalid max Tx rate(%llu) Kbps > speed(%u) Kbps specified\n", |
| sum_max_rate, speed); |
| return -EINVAL; |
| } |
| if (sum_min_rate && sum_min_rate > (u64)speed) { |
| dev_err(dev, "Invalid min Tx rate(%llu) Kbps > speed (%u) Kbps specified\n", |
| sum_min_rate, speed); |
| return -EINVAL; |
| } |
| |
| /* make sure vsi->ch_rss_size is set correctly based on TC's qcount */ |
| vsi->ch_rss_size = max_rss_q_cnt; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_add_vsi_to_fdir - add a VSI to the flow director group for PF |
| * @pf: ptr to PF device |
| * @vsi: ptr to VSI |
| */ |
| static int ice_add_vsi_to_fdir(struct ice_pf *pf, struct ice_vsi *vsi) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| bool added = false; |
| struct ice_hw *hw; |
| int flow; |
| |
| if (!(vsi->num_gfltr || vsi->num_bfltr)) |
| return -EINVAL; |
| |
| hw = &pf->hw; |
| for (flow = 0; flow < ICE_FLTR_PTYPE_MAX; flow++) { |
| struct ice_fd_hw_prof *prof; |
| int tun, status; |
| u64 entry_h; |
| |
| if (!(hw->fdir_prof && hw->fdir_prof[flow] && |
| hw->fdir_prof[flow]->cnt)) |
| continue; |
| |
| for (tun = 0; tun < ICE_FD_HW_SEG_MAX; tun++) { |
| enum ice_flow_priority prio; |
| u64 prof_id; |
| |
| /* add this VSI to FDir profile for this flow */ |
| prio = ICE_FLOW_PRIO_NORMAL; |
| prof = hw->fdir_prof[flow]; |
| prof_id = flow + tun * ICE_FLTR_PTYPE_MAX; |
| status = ice_flow_add_entry(hw, ICE_BLK_FD, prof_id, |
| prof->vsi_h[0], vsi->idx, |
| prio, prof->fdir_seg[tun], |
| &entry_h); |
| if (status) { |
| dev_err(dev, "channel VSI idx %d, not able to add to group %d\n", |
| vsi->idx, flow); |
| continue; |
| } |
| |
| prof->entry_h[prof->cnt][tun] = entry_h; |
| } |
| |
| /* store VSI for filter replay and delete */ |
| prof->vsi_h[prof->cnt] = vsi->idx; |
| prof->cnt++; |
| |
| added = true; |
| dev_dbg(dev, "VSI idx %d added to fdir group %d\n", vsi->idx, |
| flow); |
| } |
| |
| if (!added) |
| dev_dbg(dev, "VSI idx %d not added to fdir groups\n", vsi->idx); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_add_channel - add a channel by adding VSI |
| * @pf: ptr to PF device |
| * @sw_id: underlying HW switching element ID |
| * @ch: ptr to channel structure |
| * |
| * Add a channel (VSI) using add_vsi and queue_map |
| */ |
| static int ice_add_channel(struct ice_pf *pf, u16 sw_id, struct ice_channel *ch) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| struct ice_vsi *vsi; |
| |
| if (ch->type != ICE_VSI_CHNL) { |
| dev_err(dev, "add new VSI failed, ch->type %d\n", ch->type); |
| return -EINVAL; |
| } |
| |
| vsi = ice_chnl_vsi_setup(pf, pf->hw.port_info, ch); |
| if (!vsi || vsi->type != ICE_VSI_CHNL) { |
| dev_err(dev, "create chnl VSI failure\n"); |
| return -EINVAL; |
| } |
| |
| ice_add_vsi_to_fdir(pf, vsi); |
| |
| ch->sw_id = sw_id; |
| ch->vsi_num = vsi->vsi_num; |
| ch->info.mapping_flags = vsi->info.mapping_flags; |
| ch->ch_vsi = vsi; |
| /* set the back pointer of channel for newly created VSI */ |
| vsi->ch = ch; |
| |
| memcpy(&ch->info.q_mapping, &vsi->info.q_mapping, |
| sizeof(vsi->info.q_mapping)); |
| memcpy(&ch->info.tc_mapping, vsi->info.tc_mapping, |
| sizeof(vsi->info.tc_mapping)); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_chnl_cfg_res |
| * @vsi: the VSI being setup |
| * @ch: ptr to channel structure |
| * |
| * Configure channel specific resources such as rings, vector. |
| */ |
| static void ice_chnl_cfg_res(struct ice_vsi *vsi, struct ice_channel *ch) |
| { |
| int i; |
| |
| for (i = 0; i < ch->num_txq; i++) { |
| struct ice_q_vector *tx_q_vector, *rx_q_vector; |
| struct ice_ring_container *rc; |
| struct ice_tx_ring *tx_ring; |
| struct ice_rx_ring *rx_ring; |
| |
| tx_ring = vsi->tx_rings[ch->base_q + i]; |
| rx_ring = vsi->rx_rings[ch->base_q + i]; |
| if (!tx_ring || !rx_ring) |
| continue; |
| |
| /* setup ring being channel enabled */ |
| tx_ring->ch = ch; |
| rx_ring->ch = ch; |
| |
| /* following code block sets up vector specific attributes */ |
| tx_q_vector = tx_ring->q_vector; |
| rx_q_vector = rx_ring->q_vector; |
| if (!tx_q_vector && !rx_q_vector) |
| continue; |
| |
| if (tx_q_vector) { |
| tx_q_vector->ch = ch; |
| /* setup Tx and Rx ITR setting if DIM is off */ |
| rc = &tx_q_vector->tx; |
| if (!ITR_IS_DYNAMIC(rc)) |
| ice_write_itr(rc, rc->itr_setting); |
| } |
| if (rx_q_vector) { |
| rx_q_vector->ch = ch; |
| /* setup Tx and Rx ITR setting if DIM is off */ |
| rc = &rx_q_vector->rx; |
| if (!ITR_IS_DYNAMIC(rc)) |
| ice_write_itr(rc, rc->itr_setting); |
| } |
| } |
| |
| /* it is safe to assume that, if channel has non-zero num_t[r]xq, then |
| * GLINT_ITR register would have written to perform in-context |
| * update, hence perform flush |
| */ |
| if (ch->num_txq || ch->num_rxq) |
| ice_flush(&vsi->back->hw); |
| } |
| |
| /** |
| * ice_cfg_chnl_all_res - configure channel resources |
| * @vsi: pte to main_vsi |
| * @ch: ptr to channel structure |
| * |
| * This function configures channel specific resources such as flow-director |
| * counter index, and other resources such as queues, vectors, ITR settings |
| */ |
| static void |
| ice_cfg_chnl_all_res(struct ice_vsi *vsi, struct ice_channel *ch) |
| { |
| /* configure channel (aka ADQ) resources such as queues, vectors, |
| * ITR settings for channel specific vectors and anything else |
| */ |
| ice_chnl_cfg_res(vsi, ch); |
| } |
| |
| /** |
| * ice_setup_hw_channel - setup new channel |
| * @pf: ptr to PF device |
| * @vsi: the VSI being setup |
| * @ch: ptr to channel structure |
| * @sw_id: underlying HW switching element ID |
| * @type: type of channel to be created (VMDq2/VF) |
| * |
| * Setup new channel (VSI) based on specified type (VMDq2/VF) |
| * and configures Tx rings accordingly |
| */ |
| static int |
| ice_setup_hw_channel(struct ice_pf *pf, struct ice_vsi *vsi, |
| struct ice_channel *ch, u16 sw_id, u8 type) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| int ret; |
| |
| ch->base_q = vsi->next_base_q; |
| ch->type = type; |
| |
| ret = ice_add_channel(pf, sw_id, ch); |
| if (ret) { |
| dev_err(dev, "failed to add_channel using sw_id %u\n", sw_id); |
| return ret; |
| } |
| |
| /* configure/setup ADQ specific resources */ |
| ice_cfg_chnl_all_res(vsi, ch); |
| |
| /* make sure to update the next_base_q so that subsequent channel's |
| * (aka ADQ) VSI queue map is correct |
| */ |
| vsi->next_base_q = vsi->next_base_q + ch->num_rxq; |
| dev_dbg(dev, "added channel: vsi_num %u, num_rxq %u\n", ch->vsi_num, |
| ch->num_rxq); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_setup_channel - setup new channel using uplink element |
| * @pf: ptr to PF device |
| * @vsi: the VSI being setup |
| * @ch: ptr to channel structure |
| * |
| * Setup new channel (VSI) based on specified type (VMDq2/VF) |
| * and uplink switching element |
| */ |
| static bool |
| ice_setup_channel(struct ice_pf *pf, struct ice_vsi *vsi, |
| struct ice_channel *ch) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| u16 sw_id; |
| int ret; |
| |
| if (vsi->type != ICE_VSI_PF) { |
| dev_err(dev, "unsupported parent VSI type(%d)\n", vsi->type); |
| return false; |
| } |
| |
| sw_id = pf->first_sw->sw_id; |
| |
| /* create channel (VSI) */ |
| ret = ice_setup_hw_channel(pf, vsi, ch, sw_id, ICE_VSI_CHNL); |
| if (ret) { |
| dev_err(dev, "failed to setup hw_channel\n"); |
| return false; |
| } |
| dev_dbg(dev, "successfully created channel()\n"); |
| |
| return ch->ch_vsi ? true : false; |
| } |
| |
| /** |
| * ice_set_bw_limit - setup BW limit for Tx traffic based on max_tx_rate |
| * @vsi: VSI to be configured |
| * @max_tx_rate: max Tx rate in Kbps to be configured as maximum BW limit |
| * @min_tx_rate: min Tx rate in Kbps to be configured as minimum BW limit |
| */ |
| static int |
| ice_set_bw_limit(struct ice_vsi *vsi, u64 max_tx_rate, u64 min_tx_rate) |
| { |
| int err; |
| |
| err = ice_set_min_bw_limit(vsi, min_tx_rate); |
| if (err) |
| return err; |
| |
| return ice_set_max_bw_limit(vsi, max_tx_rate); |
| } |
| |
| /** |
| * ice_create_q_channel - function to create channel |
| * @vsi: VSI to be configured |
| * @ch: ptr to channel (it contains channel specific params) |
| * |
| * This function creates channel (VSI) using num_queues specified by user, |
| * reconfigs RSS if needed. |
| */ |
| static int ice_create_q_channel(struct ice_vsi *vsi, struct ice_channel *ch) |
| { |
| struct ice_pf *pf = vsi->back; |
| struct device *dev; |
| |
| if (!ch) |
| return -EINVAL; |
| |
| dev = ice_pf_to_dev(pf); |
| if (!ch->num_txq || !ch->num_rxq) { |
| dev_err(dev, "Invalid num_queues requested: %d\n", ch->num_rxq); |
| return -EINVAL; |
| } |
| |
| if (!vsi->cnt_q_avail || vsi->cnt_q_avail < ch->num_txq) { |
| dev_err(dev, "cnt_q_avail (%u) less than num_queues %d\n", |
| vsi->cnt_q_avail, ch->num_txq); |
| return -EINVAL; |
| } |
| |
| if (!ice_setup_channel(pf, vsi, ch)) { |
| dev_info(dev, "Failed to setup channel\n"); |
| return -EINVAL; |
| } |
| /* configure BW rate limit */ |
| if (ch->ch_vsi && (ch->max_tx_rate || ch->min_tx_rate)) { |
| int ret; |
| |
| ret = ice_set_bw_limit(ch->ch_vsi, ch->max_tx_rate, |
| ch->min_tx_rate); |
| if (ret) |
| dev_err(dev, "failed to set Tx rate of %llu Kbps for VSI(%u)\n", |
| ch->max_tx_rate, ch->ch_vsi->vsi_num); |
| else |
| dev_dbg(dev, "set Tx rate of %llu Kbps for VSI(%u)\n", |
| ch->max_tx_rate, ch->ch_vsi->vsi_num); |
| } |
| |
| vsi->cnt_q_avail -= ch->num_txq; |
| |
| return 0; |
| } |
| |
| /** |
| * ice_rem_all_chnl_fltrs - removes all channel filters |
| * @pf: ptr to PF, TC-flower based filter are tracked at PF level |
| * |
| * Remove all advanced switch filters only if they are channel specific |
| * tc-flower based filter |
| */ |
| static void ice_rem_all_chnl_fltrs(struct ice_pf *pf) |
| { |
| struct ice_tc_flower_fltr *fltr; |
| struct hlist_node *node; |
| |
| /* to remove all channel filters, iterate an ordered list of filters */ |
| hlist_for_each_entry_safe(fltr, node, |
| &pf->tc_flower_fltr_list, |
| tc_flower_node) { |
| struct ice_rule_query_data rule; |
| int status; |
| |
| /* for now process only channel specific filters */ |
| if (!ice_is_chnl_fltr(fltr)) |
| continue; |
| |
| rule.rid = fltr->rid; |
| rule.rule_id = fltr->rule_id; |
| rule.vsi_handle = fltr->dest_vsi_handle; |
| status = ice_rem_adv_rule_by_id(&pf->hw, &rule); |
| if (status) { |
| if (status == -ENOENT) |
| dev_dbg(ice_pf_to_dev(pf), "TC flower filter (rule_id %u) does not exist\n", |
| rule.rule_id); |
| else |
| dev_err(ice_pf_to_dev(pf), "failed to delete TC flower filter, status %d\n", |
| status); |
| } else if (fltr->dest_vsi) { |
| /* update advanced switch filter count */ |
| if (fltr->dest_vsi->type == ICE_VSI_CHNL) { |
| u32 flags = fltr->flags; |
| |
| fltr->dest_vsi->num_chnl_fltr--; |
| if (flags & (ICE_TC_FLWR_FIELD_DST_MAC | |
| ICE_TC_FLWR_FIELD_ENC_DST_MAC)) |
| pf->num_dmac_chnl_fltrs--; |
| } |
| } |
| |
| hlist_del(&fltr->tc_flower_node); |
| kfree(fltr); |
| } |
| } |
| |
| /** |
| * ice_remove_q_channels - Remove queue channels for the TCs |
| * @vsi: VSI to be configured |
| * @rem_fltr: delete advanced switch filter or not |
| * |
| * Remove queue channels for the TCs |
| */ |
| static void ice_remove_q_channels(struct ice_vsi *vsi, bool rem_fltr) |
| { |
| struct ice_channel *ch, *ch_tmp; |
| struct ice_pf *pf = vsi->back; |
| int i; |
| |
| /* remove all tc-flower based filter if they are channel filters only */ |
| if (rem_fltr) |
| ice_rem_all_chnl_fltrs(pf); |
| |
| /* remove ntuple filters since queue configuration is being changed */ |
| if (vsi->netdev->features & NETIF_F_NTUPLE) { |
| struct ice_hw *hw = &pf->hw; |
| |
| mutex_lock(&hw->fdir_fltr_lock); |
| ice_fdir_del_all_fltrs(vsi); |
| mutex_unlock(&hw->fdir_fltr_lock); |
| } |
| |
| /* perform cleanup for channels if they exist */ |
| list_for_each_entry_safe(ch, ch_tmp, &vsi->ch_list, list) { |
| struct ice_vsi *ch_vsi; |
| |
| list_del(&ch->list); |
| ch_vsi = ch->ch_vsi; |
| if (!ch_vsi) { |
| kfree(ch); |
| continue; |
| } |
| |
| /* Reset queue contexts */ |
| for (i = 0; i < ch->num_rxq; i++) { |
| struct ice_tx_ring *tx_ring; |
| struct ice_rx_ring *rx_ring; |
| |
| tx_ring = vsi->tx_rings[ch->base_q + i]; |
| rx_ring = vsi->rx_rings[ch->base_q + i]; |
| if (tx_ring) { |
| tx_ring->ch = NULL; |
| if (tx_ring->q_vector) |
| tx_ring->q_vector->ch = NULL; |
| } |
| if (rx_ring) { |
| rx_ring->ch = NULL; |
| if (rx_ring->q_vector) |
| rx_ring->q_vector->ch = NULL; |
| } |
| } |
| |
| /* Release FD resources for the channel VSI */ |
| ice_fdir_rem_adq_chnl(&pf->hw, ch->ch_vsi->idx); |
| |
| /* clear the VSI from scheduler tree */ |
| ice_rm_vsi_lan_cfg(ch->ch_vsi->port_info, ch->ch_vsi->idx); |
| |
| /* Delete VSI from FW */ |
| ice_vsi_delete(ch->ch_vsi); |
| |
| /* Delete VSI from PF and HW VSI arrays */ |
| ice_vsi_clear(ch->ch_vsi); |
| |
| /* free the channel */ |
| kfree(ch); |
| } |
| |
| /* clear the channel VSI map which is stored in main VSI */ |
| ice_for_each_chnl_tc(i) |
| vsi->tc_map_vsi[i] = NULL; |
| |
| /* reset main VSI's all TC information */ |
| vsi->all_enatc = 0; |
| vsi->all_numtc = 0; |
| } |
| |
| /** |
| * ice_rebuild_channels - rebuild channel |
| * @pf: ptr to PF |
| * |
| * Recreate channel VSIs and replay filters |
| */ |
| static int ice_rebuild_channels(struct ice_pf *pf) |
| { |
| struct device *dev = ice_pf_to_dev(pf); |
| struct ice_vsi *main_vsi; |
| bool rem_adv_fltr = true; |
| struct ice_channel *ch; |
| struct ice_vsi *vsi; |
| int tc_idx = 1; |
| int i, err; |
| |
| main_vsi = ice_get_main_vsi(pf); |
| if (!main_vsi) |
| return 0; |
| |
| if (!test_bit(ICE_FLAG_TC_MQPRIO, pf->flags) || |
| main_vsi->old_numtc == 1) |
| return 0; /* nothing to be done */ |
| |
| /* reconfigure main VSI based on old value of TC and cached values |
| * for MQPRIO opts |
| */ |
| err = ice_vsi_cfg_tc(main_vsi, main_vsi->old_ena_tc); |
| if (err) { |
| dev_err(dev, "failed configuring TC(ena_tc:0x%02x) for HW VSI=%u\n", |
| main_vsi->old_ena_tc, main_vsi->vsi_num); |
| return err; |
| } |
| |
| /* rebuild ADQ VSIs */ |
| ice_for_each_vsi(pf, i) { |
| enum ice_vsi_type type; |
| |
| vsi = pf->vsi[i]; |
| if (!vsi || vsi->type != ICE_VSI_CHNL) |
| continue; |
| |
| type = vsi->type; |
| |
| /* rebuild ADQ VSI */ |
| err = ice_vsi_rebuild(vsi, true); |
| if (err) { |
| dev_err(dev, "VSI (type:%s) at index %d rebuild failed, err %d\n", |
| ice_vsi_type_str(type), vsi->idx, err); |
| goto cleanup; |
| } |
| |
| /* Re-map HW VSI number, using VSI handle that has been |
| * previously validated in ice_replay_vsi() call above |
| */ |
| vsi->vsi_num = ice_get_hw_vsi_num(&pf->hw, vsi->idx); |
| |
| /* replay filters for the VSI */ |
| err = ice_replay_vsi(&pf->hw, vsi->idx); |
| if (err) { |
| dev_err(dev, "VSI (type:%s) replay failed, err %d, VSI index %d\n", |
| ice_vsi_type_str(type), err, vsi->idx); |
| rem_adv_fltr = false; |
| goto cleanup; |
| } |
| dev_info(dev, "VSI (type:%s) at index %d rebuilt successfully\n", |
| ice_vsi_type_str(type), vsi->idx); |
| |
| /* store ADQ VSI at correct TC index in main VSI's |
| * map of TC to VSI |
| */ |
| main_vsi->tc_map_vsi[tc_idx++] = vsi; |
| } |
| |
| /* ADQ VSI(s) has been rebuilt successfully, so setup |
| * channel for main VSI's Tx and Rx rings |
| */ |
| list_for_each_entry(ch, &main_vsi->ch_list, list) { |
| struct ice_vsi *ch_vsi; |
| |
| ch_vsi = ch->ch_vsi; |
| if (!ch_vsi) |
| continue; |
| |
| /* reconfig channel resources */ |
| ice_cfg_chnl_all_res(main_vsi, ch); |
| |
| /* replay BW rate limit if it is non-zero */ |
| if (!ch->max_tx_rate && !ch->min_tx_rate) |
| continue; |
| |
| err = ice_set_bw_limit(ch_vsi, ch->max_tx_rate, |
| ch->min_tx_rate); |
| if (err) |
| dev_err(dev, "failed (err:%d) to rebuild BW rate limit, max_tx_rate: %llu Kbps, min_tx_rate: %llu Kbps for VSI(%u)\n", |
| err, ch->max_tx_rate, ch->min_tx_rate, |
| ch_vsi->vsi_num); |
| else |
| dev_dbg(dev, "successfully rebuild BW rate limit, max_tx_rate: %llu Kbps, min_tx_rate: %llu Kbps for VSI(%u)\n", |
| ch->max_tx_rate, ch->min_tx_rate, |
| ch_vsi->vsi_num); |
| } |
| |
| /* reconfig RSS for main VSI */ |
| if (main_vsi->ch_rss_size) |
| ice_vsi_cfg_rss_lut_key(main_vsi); |
| |
| return 0; |
| |
| cleanup: |
| ice_remove_q_channels(main_vsi, rem_adv_fltr); |
| return err; |
| } |
| |
| /** |
| * ice_create_q_channels - Add queue channel for the given TCs |
| * @vsi: VSI to be configured |
| * |
| * Configures queue channel mapping to the given TCs |
| */ |
| static int ice_create_q_channels(struct ice_vsi *vsi) |
| { |
| struct ice_pf *pf = vsi->back; |
| struct ice_channel *ch; |
| int ret = 0, i; |
| |
| ice_for_each_chnl_tc(i) { |
| if (!(vsi->all_enatc & BIT(i))) |
| continue; |
| |
| ch = kzalloc(sizeof(*ch), GFP_KERNEL); |
| if (!ch) { |
| ret = -ENOMEM; |
| goto err_free; |
| } |
| INIT_LIST_HEAD(&ch->list); |
| ch->num_rxq = vsi->mqprio_qopt.qopt.count[i]; |
| ch->num_txq = vsi->mqprio_qopt.qopt.count[i]; |
| ch->base_q = vsi->mqprio_qopt.qopt.offset[i]; |
| ch->max_tx_rate = vsi->mqprio_qopt.max_rate[i]; |
| ch->min_tx_rate = vsi->mqprio_qopt.min_rate[i]; |
| |
| /* convert to Kbits/s */ |
| if (ch->max_tx_rate) |
| ch->max_tx_rate = div_u64(ch->max_tx_rate, |
| ICE_BW_KBPS_DIVISOR); |
| if (ch->min_tx_rate) |
| ch->min_tx_rate = div_u64(ch->min_tx_rate, |
| ICE_BW_KBPS_DIVISOR); |
| |
| ret = ice_create_q_channel(vsi, ch); |
| if (ret) { |
| dev_err(ice_pf_to_dev(pf), |
| "failed creating channel TC:%d\n", i); |
| kfree(ch); |
| goto err_free; |
| } |
| list_add_tail(&ch->list, &vsi->ch_list); |
| vsi->tc_map_vsi[i] = ch->ch_vsi; |
| dev_dbg(ice_pf_to_dev(pf), |
| "successfully created channel: VSI %pK\n", ch->ch_vsi); |
| } |
| return 0; |
| |
| err_free: |
| ice_remove_q_channels(vsi, false); |
| |
| return ret; |
| } |
| |
| /** |
| * ice_setup_tc_mqprio_qdisc - configure multiple traffic classes |
| * @netdev: net device to configure |
| * @type_data: TC offload data |
| */ |
| static int ice_setup_tc_mqprio_qdisc(struct net_device *netdev, void *type_data) |
| { |
| struct tc_mqprio_qopt_offload *mqprio_qopt = type_data; |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| struct ice_pf *pf = vsi->back; |
| u16 mode, ena_tc_qdisc = 0; |
| int cur_txq, cur_rxq; |
| u8 hw = 0, num_tcf; |
| struct device *dev; |
| int ret, i; |
| |
| dev = ice_pf_to_dev(pf); |
| num_tcf = mqprio_qopt->qopt.num_tc; |
| hw = mqprio_qopt->qopt.hw; |
| mode = mqprio_qopt->mode; |
| if (!hw) { |
| clear_bit(ICE_FLAG_TC_MQPRIO, pf->flags); |
| vsi->ch_rss_size = 0; |
| memcpy(&vsi->mqprio_qopt, mqprio_qopt, sizeof(*mqprio_qopt)); |
| goto config_tcf; |
| } |
| |
| /* Generate queue region map for number of TCF requested */ |
| for (i = 0; i < num_tcf; i++) |
| ena_tc_qdisc |= BIT(i); |
| |
| switch (mode) { |
| case TC_MQPRIO_MODE_CHANNEL: |
| |
| if (pf->hw.port_info->is_custom_tx_enabled) { |
| dev_err(dev, "Custom Tx scheduler feature enabled, can't configure ADQ\n"); |
| return -EBUSY; |
| } |
| ice_tear_down_devlink_rate_tree(pf); |
| |
| ret = ice_validate_mqprio_qopt(vsi, mqprio_qopt); |
| if (ret) { |
| netdev_err(netdev, "failed to validate_mqprio_qopt(), ret %d\n", |
| ret); |
| return ret; |
| } |
| memcpy(&vsi->mqprio_qopt, mqprio_qopt, sizeof(*mqprio_qopt)); |
| set_bit(ICE_FLAG_TC_MQPRIO, pf->flags); |
| /* don't assume state of hw_tc_offload during driver load |
| * and set the flag for TC flower filter if hw_tc_offload |
| * already ON |
| */ |
| if (vsi->netdev->features & NETIF_F_HW_TC) |
| set_bit(ICE_FLAG_CLS_FLOWER, pf->flags); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| config_tcf: |
| |
| /* Requesting same TCF configuration as already enabled */ |
| if (ena_tc_qdisc == vsi->tc_cfg.ena_tc && |
| mode != TC_MQPRIO_MODE_CHANNEL) |
| return 0; |
| |
| /* Pause VSI queues */ |
| ice_dis_vsi(vsi, true); |
| |
| if (!hw && !test_bit(ICE_FLAG_TC_MQPRIO, pf->flags)) |
| ice_remove_q_channels(vsi, true); |
| |
| if (!hw && !test_bit(ICE_FLAG_TC_MQPRIO, pf->flags)) { |
| vsi->req_txq = min_t(int, ice_get_avail_txq_count(pf), |
| num_online_cpus()); |
| vsi->req_rxq = min_t(int, ice_get_avail_rxq_count(pf), |
| num_online_cpus()); |
| } else { |
| /* logic to rebuild VSI, same like ethtool -L */ |
| u16 offset = 0, qcount_tx = 0, qcount_rx = 0; |
| |
| for (i = 0; i < num_tcf; i++) { |
| if (!(ena_tc_qdisc & BIT(i))) |
| continue; |
| |
| offset = vsi->mqprio_qopt.qopt.offset[i]; |
| qcount_rx = vsi->mqprio_qopt.qopt.count[i]; |
| qcount_tx = vsi->mqprio_qopt.qopt.count[i]; |
| } |
| vsi->req_txq = offset + qcount_tx; |
| vsi->req_rxq = offset + qcount_rx; |
| |
| /* store away original rss_size info, so that it gets reused |
| * form ice_vsi_rebuild during tc-qdisc delete stage - to |
| * determine, what should be the rss_sizefor main VSI |
| */ |
| vsi->orig_rss_size = vsi->rss_size; |
| } |
| |
| /* save current values of Tx and Rx queues before calling VSI rebuild |
| * for fallback option |
| */ |
| cur_txq = vsi->num_txq; |
| cur_rxq = vsi->num_rxq; |
| |
| /* proceed with rebuild main VSI using correct number of queues */ |
| ret = ice_vsi_rebuild(vsi, false); |
| if (ret) { |
| /* fallback to current number of queues */ |
| dev_info(dev, "Rebuild failed with new queues, try with current number of queues\n"); |
| vsi->req_txq = cur_txq; |
| vsi->req_rxq = cur_rxq; |
| clear_bit(ICE_RESET_FAILED, pf->state); |
| if (ice_vsi_rebuild(vsi, false)) { |
| dev_err(dev, "Rebuild of main VSI failed again\n"); |
| return ret; |
| } |
| } |
| |
| vsi->all_numtc = num_tcf; |
| vsi->all_enatc = ena_tc_qdisc; |
| ret = ice_vsi_cfg_tc(vsi, ena_tc_qdisc); |
| if (ret) { |
| netdev_err(netdev, "failed configuring TC for VSI id=%d\n", |
| vsi->vsi_num); |
| goto exit; |
| } |
| |
| if (test_bit(ICE_FLAG_TC_MQPRIO, pf->flags)) { |
| u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0]; |
| u64 min_tx_rate = vsi->mqprio_qopt.min_rate[0]; |
| |
| /* set TC0 rate limit if specified */ |
| if (max_tx_rate || min_tx_rate) { |
| /* convert to Kbits/s */ |
| if (max_tx_rate) |
| max_tx_rate = div_u64(max_tx_rate, ICE_BW_KBPS_DIVISOR); |
| if (min_tx_rate) |
| min_tx_rate = div_u64(min_tx_rate, ICE_BW_KBPS_DIVISOR); |
| |
| ret = ice_set_bw_limit(vsi, max_tx_rate, min_tx_rate); |
| if (!ret) { |
| dev_dbg(dev, "set Tx rate max %llu min %llu for VSI(%u)\n", |
| max_tx_rate, min_tx_rate, vsi->vsi_num); |
| } else { |
| dev_err(dev, "failed to set Tx rate max %llu min %llu for VSI(%u)\n", |
| max_tx_rate, min_tx_rate, vsi->vsi_num); |
| goto exit; |
| } |
| } |
| ret = ice_create_q_channels(vsi); |
| if (ret) { |
| netdev_err(netdev, "failed configuring queue channels\n"); |
| goto exit; |
| } else { |
| netdev_dbg(netdev, "successfully configured channels\n"); |
| } |
| } |
| |
| if (vsi->ch_rss_size) |
| ice_vsi_cfg_rss_lut_key(vsi); |
| |
| exit: |
| /* if error, reset the all_numtc and all_enatc */ |
| if (ret) { |
| vsi->all_numtc = 0; |
| vsi->all_enatc = 0; |
| } |
| /* resume VSI */ |
| ice_ena_vsi(vsi, true); |
| |
| return ret; |
| } |
| |
| static LIST_HEAD(ice_block_cb_list); |
| |
| static int |
| ice_setup_tc(struct net_device *netdev, enum tc_setup_type type, |
| void *type_data) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_pf *pf = np->vsi->back; |
| int err; |
| |
| switch (type) { |
| case TC_SETUP_BLOCK: |
| return flow_block_cb_setup_simple(type_data, |
| &ice_block_cb_list, |
| ice_setup_tc_block_cb, |
| np, np, true); |
| case TC_SETUP_QDISC_MQPRIO: |
| /* setup traffic classifier for receive side */ |
| mutex_lock(&pf->tc_mutex); |
| err = ice_setup_tc_mqprio_qdisc(netdev, type_data); |
| mutex_unlock(&pf->tc_mutex); |
| return err; |
| default: |
| return -EOPNOTSUPP; |
| } |
| return -EOPNOTSUPP; |
| } |
| |
| static struct ice_indr_block_priv * |
| ice_indr_block_priv_lookup(struct ice_netdev_priv *np, |
| struct net_device *netdev) |
| { |
| struct ice_indr_block_priv *cb_priv; |
| |
| list_for_each_entry(cb_priv, &np->tc_indr_block_priv_list, list) { |
| if (!cb_priv->netdev) |
| return NULL; |
| if (cb_priv->netdev == netdev) |
| return cb_priv; |
| } |
| return NULL; |
| } |
| |
| static int |
| ice_indr_setup_block_cb(enum tc_setup_type type, void *type_data, |
| void *indr_priv) |
| { |
| struct ice_indr_block_priv *priv = indr_priv; |
| struct ice_netdev_priv *np = priv->np; |
| |
| switch (type) { |
| case TC_SETUP_CLSFLOWER: |
| return ice_setup_tc_cls_flower(np, priv->netdev, |
| (struct flow_cls_offload *) |
| type_data); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static int |
| ice_indr_setup_tc_block(struct net_device *netdev, struct Qdisc *sch, |
| struct ice_netdev_priv *np, |
| struct flow_block_offload *f, void *data, |
| void (*cleanup)(struct flow_block_cb *block_cb)) |
| { |
| struct ice_indr_block_priv *indr_priv; |
| struct flow_block_cb *block_cb; |
| |
| if (!ice_is_tunnel_supported(netdev) && |
| !(is_vlan_dev(netdev) && |
| vlan_dev_real_dev(netdev) == np->vsi->netdev)) |
| return -EOPNOTSUPP; |
| |
| if (f->binder_type != FLOW_BLOCK_BINDER_TYPE_CLSACT_INGRESS) |
| return -EOPNOTSUPP; |
| |
| switch (f->command) { |
| case FLOW_BLOCK_BIND: |
| indr_priv = ice_indr_block_priv_lookup(np, netdev); |
| if (indr_priv) |
| return -EEXIST; |
| |
| indr_priv = kzalloc(sizeof(*indr_priv), GFP_KERNEL); |
| if (!indr_priv) |
| return -ENOMEM; |
| |
| indr_priv->netdev = netdev; |
| indr_priv->np = np; |
| list_add(&indr_priv->list, &np->tc_indr_block_priv_list); |
| |
| block_cb = |
| flow_indr_block_cb_alloc(ice_indr_setup_block_cb, |
| indr_priv, indr_priv, |
| ice_rep_indr_tc_block_unbind, |
| f, netdev, sch, data, np, |
| cleanup); |
| |
| if (IS_ERR(block_cb)) { |
| list_del(&indr_priv->list); |
| kfree(indr_priv); |
| return PTR_ERR(block_cb); |
| } |
| flow_block_cb_add(block_cb, f); |
| list_add_tail(&block_cb->driver_list, &ice_block_cb_list); |
| break; |
| case FLOW_BLOCK_UNBIND: |
| indr_priv = ice_indr_block_priv_lookup(np, netdev); |
| if (!indr_priv) |
| return -ENOENT; |
| |
| block_cb = flow_block_cb_lookup(f->block, |
| ice_indr_setup_block_cb, |
| indr_priv); |
| if (!block_cb) |
| return -ENOENT; |
| |
| flow_indr_block_cb_remove(block_cb, f); |
| |
| list_del(&block_cb->driver_list); |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| return 0; |
| } |
| |
| static int |
| ice_indr_setup_tc_cb(struct net_device *netdev, struct Qdisc *sch, |
| void *cb_priv, enum tc_setup_type type, void *type_data, |
| void *data, |
| void (*cleanup)(struct flow_block_cb *block_cb)) |
| { |
| switch (type) { |
| case TC_SETUP_BLOCK: |
| return ice_indr_setup_tc_block(netdev, sch, cb_priv, type_data, |
| data, cleanup); |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| /** |
| * ice_open - Called when a network interface becomes active |
| * @netdev: network interface device structure |
| * |
| * The open entry point is called when a network interface is made |
| * active by the system (IFF_UP). At this point all resources needed |
| * for transmit and receive operations are allocated, the interrupt |
| * handler is registered with the OS, the netdev watchdog is enabled, |
| * and the stack is notified that the interface is ready. |
| * |
| * Returns 0 on success, negative value on failure |
| */ |
| int ice_open(struct net_device *netdev) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_pf *pf = np->vsi->back; |
| |
| if (ice_is_reset_in_progress(pf->state)) { |
| netdev_err(netdev, "can't open net device while reset is in progress"); |
| return -EBUSY; |
| } |
| |
| return ice_open_internal(netdev); |
| } |
| |
| /** |
| * ice_open_internal - Called when a network interface becomes active |
| * @netdev: network interface device structure |
| * |
| * Internal ice_open implementation. Should not be used directly except for ice_open and reset |
| * handling routine |
| * |
| * Returns 0 on success, negative value on failure |
| */ |
| int ice_open_internal(struct net_device *netdev) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| struct ice_pf *pf = vsi->back; |
| struct ice_port_info *pi; |
| int err; |
| |
| if (test_bit(ICE_NEEDS_RESTART, pf->state)) { |
| netdev_err(netdev, "driver needs to be unloaded and reloaded\n"); |
| return -EIO; |
| } |
| |
| netif_carrier_off(netdev); |
| |
| pi = vsi->port_info; |
| err = ice_update_link_info(pi); |
| if (err) { |
| netdev_err(netdev, "Failed to get link info, error %d\n", err); |
| return err; |
| } |
| |
| ice_check_link_cfg_err(pf, pi->phy.link_info.link_cfg_err); |
| |
| /* Set PHY if there is media, otherwise, turn off PHY */ |
| if (pi->phy.link_info.link_info & ICE_AQ_MEDIA_AVAILABLE) { |
| clear_bit(ICE_FLAG_NO_MEDIA, pf->flags); |
| if (!test_bit(ICE_PHY_INIT_COMPLETE, pf->state)) { |
| err = ice_init_phy_user_cfg(pi); |
| if (err) { |
| netdev_err(netdev, "Failed to initialize PHY settings, error %d\n", |
| err); |
| return err; |
| } |
| } |
| |
| err = ice_configure_phy(vsi); |
| if (err) { |
| netdev_err(netdev, "Failed to set physical link up, error %d\n", |
| err); |
| return err; |
| } |
| } else { |
| set_bit(ICE_FLAG_NO_MEDIA, pf->flags); |
| ice_set_link(vsi, false); |
| } |
| |
| err = ice_vsi_open(vsi); |
| if (err) |
| netdev_err(netdev, "Failed to open VSI 0x%04X on switch 0x%04X\n", |
| vsi->vsi_num, vsi->vsw->sw_id); |
| |
| /* Update existing tunnels information */ |
| udp_tunnel_get_rx_info(netdev); |
| |
| return err; |
| } |
| |
| /** |
| * ice_stop - Disables a network interface |
| * @netdev: network interface device structure |
| * |
| * The stop entry point is called when an interface is de-activated by the OS, |
| * and the netdevice enters the DOWN state. The hardware is still under the |
| * driver's control, but the netdev interface is disabled. |
| * |
| * Returns success only - not allowed to fail |
| */ |
| int ice_stop(struct net_device *netdev) |
| { |
| struct ice_netdev_priv *np = netdev_priv(netdev); |
| struct ice_vsi *vsi = np->vsi; |
| struct ice_pf *pf = vsi->back; |
| |
| if (ice_is_reset_in_progress(pf->state)) { |
| netdev_err(netdev, "can't stop net device while reset is in progress"); |
| return -EBUSY; |
| } |
| |
| if (test_bit(ICE_FLAG_LINK_DOWN_ON_CLOSE_ENA, vsi->back->flags)) { |
| int link_err = ice_force_phys_link_state(vsi, false); |
| |
| if (link_err) { |
| netdev_err(vsi->netdev, "Failed to set physical link down, VSI %d error %d\n", |
| vsi->vsi_num, link_err); |
| return -EIO; |
| } |
| } |
| |
| ice_vsi_close(vsi); |
| |
| return 0; |
| } |
| |
| /** |
| * ice_features_check - Validate encapsulated packet conforms to limits |
| * @skb: skb buffer |
| * @netdev: This port's netdev |
| * @features: Offload features that the stack believes apply |
| */ |
| static netdev_features_t |
| ice_features_check(struct sk_buff *skb, |
| struct net_device __always_unused *netdev, |
| netdev_features_t features) |
| { |
| bool gso = skb_is_gso(skb); |
| size_t len; |
| |
| /* No point in doing any of this if neither checksum nor GSO are |
| * being requested for this frame. We can rule out both by just |
| * checking for CHECKSUM_PARTIAL |
| */ |
| if (skb->ip_summed != CHECKSUM_PARTIAL) |
| return features; |
| |
| /* We cannot support GSO if the MSS is going to be less than |
| * 64 bytes. If it is then we need to drop support for GSO. |
| */ |
| if (gso && (skb_shinfo(skb)->gso_size < ICE_TXD_CTX_MIN_MSS)) |
| features &= ~NETIF_F_GSO_MASK; |
| |
| len = skb_network_offset(skb); |
| if (len > ICE_TXD_MACLEN_MAX || len & 0x1) |
| goto out_rm_features; |
| |
| len = skb_network_header_len(skb); |
| if (len > ICE_TXD_IPLEN_MAX || len & 0x1) |
| goto out_rm_features; |
| |
| if (skb->encapsulation) { |
| /* this must work for VXLAN frames AND IPIP/SIT frames, and in |
| * the case of IPIP frames, the transport header pointer is |
| * after the inner header! So check to make sure that this |
| * is a GRE or UDP_TUNNEL frame before doing that math. |
| */ |
| if (gso && (skb_shinfo(skb)->gso_type & |
| (SKB_GSO_GRE | SKB_GSO_UDP_TUNNEL))) { |
| len = skb_inner_network_header(skb) - |
| skb_transport_header(skb); |
| if (len > ICE_TXD_L4LEN_MAX || len & 0x1) |
| goto out_rm_features; |
| } |
| |
| len = skb_inner_network_header_len(skb); |
| if (len > ICE_TXD_IPLEN_MAX || len & 0x1) |
| goto out_rm_features; |
| } |
| |
| return features; |
| out_rm_features: |
| return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); |
| } |
| |
| static const struct net_device_ops ice_netdev_safe_mode_ops = { |
| .ndo_open = ice_open, |
| .ndo_stop = ice_stop, |
| .ndo_start_xmit = ice_start_xmit, |
| .ndo_set_mac_address = ice_set_mac_address, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_change_mtu = ice_change_mtu, |
| .ndo_get_stats64 = ice_get_stats64, |
| .ndo_tx_timeout = ice_tx_timeout, |
| .ndo_bpf = ice_xdp_safe_mode, |
| }; |
| |
| static const struct net_device_ops ice_netdev_ops = { |
| .ndo_open = ice_open, |
| .ndo_stop = ice_stop, |
| .ndo_start_xmit = ice_start_xmit, |
| .ndo_select_queue = ice_select_queue, |
| .ndo_features_check = ice_features_check, |
| .ndo_fix_features = ice_fix_features, |
| .ndo_set_rx_mode = ice_set_rx_mode, |
| .ndo_set_mac_address = ice_set_mac_address, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_change_mtu = ice_change_mtu, |
| .ndo_get_stats64 = ice_get_stats64, |
| .ndo_set_tx_maxrate = ice_set_tx_maxrate, |
| .ndo_eth_ioctl = ice_eth_ioctl, |
| .ndo_set_vf_spoofchk = ice_set_vf_spoofchk, |
| .ndo_set_vf_mac = ice_set_vf_mac, |
| .ndo_get_vf_config = ice_get_vf_cfg, |
| .ndo_set_vf_trust = ice_set_vf_trust, |
| .ndo_set_vf_vlan = ice_set_vf_port_vlan, |
| .ndo_set_vf_link_state = ice_set_vf_link_state, |
| .ndo_get_vf_stats = ice_get_vf_stats, |
| .ndo_set_vf_rate = ice_set_vf_bw, |
| .ndo_vlan_rx_add_vid = ice_vlan_rx_add_vid, |
| .ndo_vlan_rx_kill_vid = ice_vlan_rx_kill_vid, |
| .ndo_setup_tc = ice_setup_tc, |
| .ndo_set_features = ice_set_features, |
| .ndo_bridge_getlink = ice_bridge_getlink, |
| .ndo_bridge_setlink = ice_bridge_setlink, |
| .ndo_fdb_add = ice_fdb_add, |
| .ndo_fdb_del = ice_fdb_del, |
| #ifdef CONFIG_RFS_ACCEL |
| .ndo_rx_flow_steer = ice_rx_flow_steer, |
| #endif |
| .ndo_tx_timeout = ice_tx_timeout, |
| .ndo_bpf = ice_xdp, |
| .ndo_xdp_xmit = ice_xdp_xmit, |
| .ndo_xsk_wakeup = ice_xsk_wakeup, |
| }; |