| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/st,stm32-dcmi.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI) |
| |
| maintainers: |
| - Hugues Fruchet <hugues.fruchet@foss.st.com> |
| |
| properties: |
| compatible: |
| const: st,stm32-dcmi |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| clocks: |
| maxItems: 1 |
| |
| clock-names: |
| items: |
| - const: mclk |
| |
| dmas: |
| maxItems: 1 |
| |
| dma-names: |
| items: |
| - const: tx |
| |
| resets: |
| maxItems: 1 |
| |
| access-controllers: |
| minItems: 1 |
| maxItems: 2 |
| |
| port: |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| unevaluatedProperties: false |
| description: |
| DCMI supports a single port node with parallel bus. |
| |
| properties: |
| endpoint: |
| $ref: video-interfaces.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| bus-type: |
| enum: [5, 6] |
| default: 5 |
| |
| bus-width: |
| enum: [8, 10, 12, 14] |
| default: 8 |
| |
| allOf: |
| - if: |
| properties: |
| bus-type: |
| const: 6 |
| |
| then: |
| properties: |
| hsync-active: false |
| vsync-active: false |
| bus-width: |
| enum: [8] |
| |
| required: |
| - bus-type |
| - pclk-sample |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| - clocks |
| - clock-names |
| - resets |
| - dmas |
| - dma-names |
| - port |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/stm32mp1-clks.h> |
| #include <dt-bindings/media/video-interfaces.h> |
| #include <dt-bindings/reset/stm32mp1-resets.h> |
| |
| dcmi: dcmi@4c006000 { |
| compatible = "st,stm32-dcmi"; |
| reg = <0x4c006000 0x400>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| resets = <&rcc CAMITF_R>; |
| clocks = <&rcc DCMI>; |
| clock-names = "mclk"; |
| dmas = <&dmamux1 75 0x400 0x0d>; |
| dma-names = "tx"; |
| |
| port { |
| dcmi_0: endpoint { |
| remote-endpoint = <&ov5640_0>; |
| bus-type = <MEDIA_BUS_TYPE_PARALLEL>; |
| bus-width = <8>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| pclk-sample = <1>; |
| }; |
| }; |
| }; |
| |
| ... |
