| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Just-In-Time compiler for eBPF bytecode on MIPS. |
| * Implementation of JIT functions common to 32-bit and 64-bit CPUs. |
| * |
| * Copyright (c) 2021 Anyfi Networks AB. |
| * Author: Johan Almbladh <johan.almbladh@gmail.com> |
| * |
| * Based on code and ideas from |
| * Copyright (c) 2017 Cavium, Inc. |
| * Copyright (c) 2017 Shubham Bansal <illusionist.neo@gmail.com> |
| * Copyright (c) 2011 Mircea Gherzan <mgherzan@gmail.com> |
| */ |
| |
| /* |
| * Code overview |
| * ============= |
| * |
| * - bpf_jit_comp.h |
| * Common definitions and utilities. |
| * |
| * - bpf_jit_comp.c |
| * Implementation of JIT top-level logic and exported JIT API functions. |
| * Implementation of internal operations shared by 32-bit and 64-bit code. |
| * JMP and ALU JIT control code, register control code, shared ALU and |
| * JMP/JMP32 JIT operations. |
| * |
| * - bpf_jit_comp32.c |
| * Implementation of functions to JIT prologue, epilogue and a single eBPF |
| * instruction for 32-bit MIPS CPUs. The functions use shared operations |
| * where possible, and implement the rest for 32-bit MIPS such as ALU64 |
| * operations. |
| * |
| * - bpf_jit_comp64.c |
| * Ditto, for 64-bit MIPS CPUs. |
| * |
| * Zero and sign extension |
| * ======================== |
| * 32-bit MIPS instructions on 64-bit MIPS registers use sign extension, |
| * but the eBPF instruction set mandates zero extension. We let the verifier |
| * insert explicit zero-extensions after 32-bit ALU operations, both for |
| * 32-bit and 64-bit MIPS JITs. Conditional JMP32 operations on 64-bit MIPs |
| * are JITed with sign extensions inserted when so expected. |
| * |
| * ALU operations |
| * ============== |
| * ALU operations on 32/64-bit MIPS and ALU64 operations on 64-bit MIPS are |
| * JITed in the following steps. ALU64 operations on 32-bit MIPS are more |
| * complicated and therefore only processed by special implementations in |
| * step (3). |
| * |
| * 1) valid_alu_i: |
| * Determine if an immediate operation can be emitted as such, or if |
| * we must fall back to the register version. |
| * |
| * 2) rewrite_alu_i: |
| * Convert BPF operation and immediate value to a canonical form for |
| * JITing. In some degenerate cases this form may be a no-op. |
| * |
| * 3) emit_alu_{i,i64,r,64}: |
| * Emit instructions for an ALU or ALU64 immediate or register operation. |
| * |
| * JMP operations |
| * ============== |
| * JMP and JMP32 operations require an JIT instruction offset table for |
| * translating the jump offset. This table is computed by dry-running the |
| * JIT without actually emitting anything. However, the computed PC-relative |
| * offset may overflow the 18-bit offset field width of the native MIPS |
| * branch instruction. In such cases, the long jump is converted into the |
| * following sequence. |
| * |
| * <branch> !<cond> +2 Inverted PC-relative branch |
| * nop Delay slot |
| * j <offset> Unconditional absolute long jump |
| * nop Delay slot |
| * |
| * Since this converted sequence alters the offset table, all offsets must |
| * be re-calculated. This may in turn trigger new branch conversions, so |
| * the process is repeated until no further changes are made. Normally it |
| * completes in 1-2 iterations. If JIT_MAX_ITERATIONS should reached, we |
| * fall back to converting every remaining jump operation. The branch |
| * conversion is independent of how the JMP or JMP32 condition is JITed. |
| * |
| * JMP32 and JMP operations are JITed as follows. |
| * |
| * 1) setup_jmp_{i,r}: |
| * Convert jump conditional and offset into a form that can be JITed. |
| * This form may be a no-op, a canonical form, or an inverted PC-relative |
| * jump if branch conversion is necessary. |
| * |
| * 2) valid_jmp_i: |
| * Determine if an immediate operations can be emitted as such, or if |
| * we must fall back to the register version. Applies to JMP32 for 32-bit |
| * MIPS, and both JMP and JMP32 for 64-bit MIPS. |
| * |
| * 3) emit_jmp_{i,i64,r,r64}: |
| * Emit instructions for an JMP or JMP32 immediate or register operation. |
| * |
| * 4) finish_jmp_{i,r}: |
| * Emit any instructions needed to finish the jump. This includes a nop |
| * for the delay slot if a branch was emitted, and a long absolute jump |
| * if the branch was converted. |
| */ |
| |
| #include <linux/limits.h> |
| #include <linux/bitops.h> |
| #include <linux/errno.h> |
| #include <linux/filter.h> |
| #include <linux/bpf.h> |
| #include <linux/slab.h> |
| #include <asm/bitops.h> |
| #include <asm/cacheflush.h> |
| #include <asm/cpu-features.h> |
| #include <asm/isa-rev.h> |
| #include <asm/uasm.h> |
| |
| #include "bpf_jit_comp.h" |
| |
| /* Convenience macros for descriptor access */ |
| #define CONVERTED(desc) ((desc) & JIT_DESC_CONVERT) |
| #define INDEX(desc) ((desc) & ~JIT_DESC_CONVERT) |
| |
| /* |
| * Push registers on the stack, starting at a given depth from the stack |
| * pointer and increasing. The next depth to be written is returned. |
| */ |
| int push_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth) |
| { |
| int reg; |
| |
| for (reg = 0; reg < BITS_PER_BYTE * sizeof(mask); reg++) |
| if (mask & BIT(reg)) { |
| if ((excl & BIT(reg)) == 0) { |
| if (sizeof(long) == 4) |
| emit(ctx, sw, reg, depth, MIPS_R_SP); |
| else /* sizeof(long) == 8 */ |
| emit(ctx, sd, reg, depth, MIPS_R_SP); |
| } |
| depth += sizeof(long); |
| } |
| |
| ctx->stack_used = max((int)ctx->stack_used, depth); |
| return depth; |
| } |
| |
| /* |
| * Pop registers from the stack, starting at a given depth from the stack |
| * pointer and increasing. The next depth to be read is returned. |
| */ |
| int pop_regs(struct jit_context *ctx, u32 mask, u32 excl, int depth) |
| { |
| int reg; |
| |
| for (reg = 0; reg < BITS_PER_BYTE * sizeof(mask); reg++) |
| if (mask & BIT(reg)) { |
| if ((excl & BIT(reg)) == 0) { |
| if (sizeof(long) == 4) |
| emit(ctx, lw, reg, depth, MIPS_R_SP); |
| else /* sizeof(long) == 8 */ |
| emit(ctx, ld, reg, depth, MIPS_R_SP); |
| } |
| depth += sizeof(long); |
| } |
| |
| return depth; |
| } |
| |
| /* Compute the 28-bit jump target address from a BPF program location */ |
| int get_target(struct jit_context *ctx, u32 loc) |
| { |
| u32 index = INDEX(ctx->descriptors[loc]); |
| unsigned long pc = (unsigned long)&ctx->target[ctx->jit_index]; |
| unsigned long addr = (unsigned long)&ctx->target[index]; |
| |
| if (!ctx->target) |
| return 0; |
| |
| if ((addr ^ pc) & ~MIPS_JMP_MASK) |
| return -1; |
| |
| return addr & MIPS_JMP_MASK; |
| } |
| |
| /* Compute the PC-relative offset to relative BPF program offset */ |
| int get_offset(const struct jit_context *ctx, int off) |
| { |
| return (INDEX(ctx->descriptors[ctx->bpf_index + off]) - |
| ctx->jit_index - 1) * sizeof(u32); |
| } |
| |
| /* dst = imm (register width) */ |
| void emit_mov_i(struct jit_context *ctx, u8 dst, s32 imm) |
| { |
| if (imm >= -0x8000 && imm <= 0x7fff) { |
| emit(ctx, addiu, dst, MIPS_R_ZERO, imm); |
| } else { |
| emit(ctx, lui, dst, (s16)((u32)imm >> 16)); |
| emit(ctx, ori, dst, dst, (u16)(imm & 0xffff)); |
| } |
| clobber_reg(ctx, dst); |
| } |
| |
| /* dst = src (register width) */ |
| void emit_mov_r(struct jit_context *ctx, u8 dst, u8 src) |
| { |
| emit(ctx, ori, dst, src, 0); |
| clobber_reg(ctx, dst); |
| } |
| |
| /* Validate ALU immediate range */ |
| bool valid_alu_i(u8 op, s32 imm) |
| { |
| switch (BPF_OP(op)) { |
| case BPF_NEG: |
| case BPF_LSH: |
| case BPF_RSH: |
| case BPF_ARSH: |
| /* All legal eBPF values are valid */ |
| return true; |
| case BPF_ADD: |
| if (IS_ENABLED(CONFIG_CPU_DADDI_WORKAROUNDS)) |
| return false; |
| /* imm must be 16 bits */ |
| return imm >= -0x8000 && imm <= 0x7fff; |
| case BPF_SUB: |
| if (IS_ENABLED(CONFIG_CPU_DADDI_WORKAROUNDS)) |
| return false; |
| /* -imm must be 16 bits */ |
| return imm >= -0x7fff && imm <= 0x8000; |
| case BPF_AND: |
| case BPF_OR: |
| case BPF_XOR: |
| /* imm must be 16 bits unsigned */ |
| return imm >= 0 && imm <= 0xffff; |
| case BPF_MUL: |
| /* imm must be zero or a positive power of two */ |
| return imm == 0 || (imm > 0 && is_power_of_2(imm)); |
| case BPF_DIV: |
| case BPF_MOD: |
| /* imm must be an 17-bit power of two */ |
| return (u32)imm <= 0x10000 && is_power_of_2((u32)imm); |
| } |
| return false; |
| } |
| |
| /* Rewrite ALU immediate operation */ |
| bool rewrite_alu_i(u8 op, s32 imm, u8 *alu, s32 *val) |
| { |
| bool act = true; |
| |
| switch (BPF_OP(op)) { |
| case BPF_LSH: |
| case BPF_RSH: |
| case BPF_ARSH: |
| case BPF_ADD: |
| case BPF_SUB: |
| case BPF_OR: |
| case BPF_XOR: |
| /* imm == 0 is a no-op */ |
| act = imm != 0; |
| break; |
| case BPF_MUL: |
| if (imm == 1) { |
| /* dst * 1 is a no-op */ |
| act = false; |
| } else if (imm == 0) { |
| /* dst * 0 is dst & 0 */ |
| op = BPF_AND; |
| } else { |
| /* dst * (1 << n) is dst << n */ |
| op = BPF_LSH; |
| imm = ilog2(abs(imm)); |
| } |
| break; |
| case BPF_DIV: |
| if (imm == 1) { |
| /* dst / 1 is a no-op */ |
| act = false; |
| } else { |
| /* dst / (1 << n) is dst >> n */ |
| op = BPF_RSH; |
| imm = ilog2(imm); |
| } |
| break; |
| case BPF_MOD: |
| /* dst % (1 << n) is dst & ((1 << n) - 1) */ |
| op = BPF_AND; |
| imm--; |
| break; |
| } |
| |
| *alu = op; |
| *val = imm; |
| return act; |
| } |
| |
| /* ALU immediate operation (32-bit) */ |
| void emit_alu_i(struct jit_context *ctx, u8 dst, s32 imm, u8 op) |
| { |
| switch (BPF_OP(op)) { |
| /* dst = -dst */ |
| case BPF_NEG: |
| emit(ctx, subu, dst, MIPS_R_ZERO, dst); |
| break; |
| /* dst = dst & imm */ |
| case BPF_AND: |
| emit(ctx, andi, dst, dst, (u16)imm); |
| break; |
| /* dst = dst | imm */ |
| case BPF_OR: |
| emit(ctx, ori, dst, dst, (u16)imm); |
| break; |
| /* dst = dst ^ imm */ |
| case BPF_XOR: |
| emit(ctx, xori, dst, dst, (u16)imm); |
| break; |
| /* dst = dst << imm */ |
| case BPF_LSH: |
| emit(ctx, sll, dst, dst, imm); |
| break; |
| /* dst = dst >> imm */ |
| case BPF_RSH: |
| emit(ctx, srl, dst, dst, imm); |
| break; |
| /* dst = dst >> imm (arithmetic) */ |
| case BPF_ARSH: |
| emit(ctx, sra, dst, dst, imm); |
| break; |
| /* dst = dst + imm */ |
| case BPF_ADD: |
| emit(ctx, addiu, dst, dst, imm); |
| break; |
| /* dst = dst - imm */ |
| case BPF_SUB: |
| emit(ctx, addiu, dst, dst, -imm); |
| break; |
| } |
| clobber_reg(ctx, dst); |
| } |
| |
| /* ALU register operation (32-bit) */ |
| void emit_alu_r(struct jit_context *ctx, u8 dst, u8 src, u8 op) |
| { |
| switch (BPF_OP(op)) { |
| /* dst = dst & src */ |
| case BPF_AND: |
| emit(ctx, and, dst, dst, src); |
| break; |
| /* dst = dst | src */ |
| case BPF_OR: |
| emit(ctx, or, dst, dst, src); |
| break; |
| /* dst = dst ^ src */ |
| case BPF_XOR: |
| emit(ctx, xor, dst, dst, src); |
| break; |
| /* dst = dst << src */ |
| case BPF_LSH: |
| emit(ctx, sllv, dst, dst, src); |
| break; |
| /* dst = dst >> src */ |
| case BPF_RSH: |
| emit(ctx, srlv, dst, dst, src); |
| break; |
| /* dst = dst >> src (arithmetic) */ |
| case BPF_ARSH: |
| emit(ctx, srav, dst, dst, src); |
| break; |
| /* dst = dst + src */ |
| case BPF_ADD: |
| emit(ctx, addu, dst, dst, src); |
| break; |
| /* dst = dst - src */ |
| case BPF_SUB: |
| emit(ctx, subu, dst, dst, src); |
| break; |
| /* dst = dst * src */ |
| case BPF_MUL: |
| if (cpu_has_mips32r1 || cpu_has_mips32r6) { |
| emit(ctx, mul, dst, dst, src); |
| } else { |
| emit(ctx, multu, dst, src); |
| emit(ctx, mflo, dst); |
| } |
| break; |
| /* dst = dst / src */ |
| case BPF_DIV: |
| if (cpu_has_mips32r6) { |
| emit(ctx, divu_r6, dst, dst, src); |
| } else { |
| emit(ctx, divu, dst, src); |
| emit(ctx, mflo, dst); |
| } |
| break; |
| /* dst = dst % src */ |
| case BPF_MOD: |
| if (cpu_has_mips32r6) { |
| emit(ctx, modu, dst, dst, src); |
| } else { |
| emit(ctx, divu, dst, src); |
| emit(ctx, mfhi, dst); |
| } |
| break; |
| } |
| clobber_reg(ctx, dst); |
| } |
| |
| /* Atomic read-modify-write (32-bit) */ |
| void emit_atomic_r(struct jit_context *ctx, u8 dst, u8 src, s16 off, u8 code) |
| { |
| LLSC_sync(ctx); |
| emit(ctx, ll, MIPS_R_T9, off, dst); |
| switch (code) { |
| case BPF_ADD: |
| case BPF_ADD | BPF_FETCH: |
| emit(ctx, addu, MIPS_R_T8, MIPS_R_T9, src); |
| break; |
| case BPF_AND: |
| case BPF_AND | BPF_FETCH: |
| emit(ctx, and, MIPS_R_T8, MIPS_R_T9, src); |
| break; |
| case BPF_OR: |
| case BPF_OR | BPF_FETCH: |
| emit(ctx, or, MIPS_R_T8, MIPS_R_T9, src); |
| break; |
| case BPF_XOR: |
| case BPF_XOR | BPF_FETCH: |
| emit(ctx, xor, MIPS_R_T8, MIPS_R_T9, src); |
| break; |
| case BPF_XCHG: |
| emit(ctx, move, MIPS_R_T8, src); |
| break; |
| } |
| emit(ctx, sc, MIPS_R_T8, off, dst); |
| emit(ctx, LLSC_beqz, MIPS_R_T8, -16 - LLSC_offset); |
| emit(ctx, nop); /* Delay slot */ |
| |
| if (code & BPF_FETCH) { |
| emit(ctx, move, src, MIPS_R_T9); |
| clobber_reg(ctx, src); |
| } |
| } |
| |
| /* Atomic compare-and-exchange (32-bit) */ |
| void emit_cmpxchg_r(struct jit_context *ctx, u8 dst, u8 src, u8 res, s16 off) |
| { |
| LLSC_sync(ctx); |
| emit(ctx, ll, MIPS_R_T9, off, dst); |
| emit(ctx, bne, MIPS_R_T9, res, 12); |
| emit(ctx, move, MIPS_R_T8, src); /* Delay slot */ |
| emit(ctx, sc, MIPS_R_T8, off, dst); |
| emit(ctx, LLSC_beqz, MIPS_R_T8, -20 - LLSC_offset); |
| emit(ctx, move, res, MIPS_R_T9); /* Delay slot */ |
| clobber_reg(ctx, res); |
| } |
| |
| /* Swap bytes and truncate a register word or half word */ |
| void emit_bswap_r(struct jit_context *ctx, u8 dst, u32 width) |
| { |
| u8 tmp = MIPS_R_T8; |
| u8 msk = MIPS_R_T9; |
| |
| switch (width) { |
| /* Swap bytes in a word */ |
| case 32: |
| if (cpu_has_mips32r2 || cpu_has_mips32r6) { |
| emit(ctx, wsbh, dst, dst); |
| emit(ctx, rotr, dst, dst, 16); |
| } else { |
| emit(ctx, sll, tmp, dst, 16); /* tmp = dst << 16 */ |
| emit(ctx, srl, dst, dst, 16); /* dst = dst >> 16 */ |
| emit(ctx, or, dst, dst, tmp); /* dst = dst | tmp */ |
| |
| emit(ctx, lui, msk, 0xff); /* msk = 0x00ff0000 */ |
| emit(ctx, ori, msk, msk, 0xff); /* msk = msk | 0xff */ |
| |
| emit(ctx, and, tmp, dst, msk); /* tmp = dst & msk */ |
| emit(ctx, sll, tmp, tmp, 8); /* tmp = tmp << 8 */ |
| emit(ctx, srl, dst, dst, 8); /* dst = dst >> 8 */ |
| emit(ctx, and, dst, dst, msk); /* dst = dst & msk */ |
| emit(ctx, or, dst, dst, tmp); /* reg = dst | tmp */ |
| } |
| break; |
| /* Swap bytes in a half word */ |
| case 16: |
| if (cpu_has_mips32r2 || cpu_has_mips32r6) { |
| emit(ctx, wsbh, dst, dst); |
| emit(ctx, andi, dst, dst, 0xffff); |
| } else { |
| emit(ctx, andi, tmp, dst, 0xff00); /* t = d & 0xff00 */ |
| emit(ctx, srl, tmp, tmp, 8); /* t = t >> 8 */ |
| emit(ctx, andi, dst, dst, 0x00ff); /* d = d & 0x00ff */ |
| emit(ctx, sll, dst, dst, 8); /* d = d << 8 */ |
| emit(ctx, or, dst, dst, tmp); /* d = d | t */ |
| } |
| break; |
| } |
| clobber_reg(ctx, dst); |
| } |
| |
| /* Validate jump immediate range */ |
| bool valid_jmp_i(u8 op, s32 imm) |
| { |
| switch (op) { |
| case JIT_JNOP: |
| /* Immediate value not used */ |
| return true; |
| case BPF_JEQ: |
| case BPF_JNE: |
| /* No immediate operation */ |
| return false; |
| case BPF_JSET: |
| case JIT_JNSET: |
| /* imm must be 16 bits unsigned */ |
| return imm >= 0 && imm <= 0xffff; |
| case BPF_JGE: |
| case BPF_JLT: |
| case BPF_JSGE: |
| case BPF_JSLT: |
| /* imm must be 16 bits */ |
| return imm >= -0x8000 && imm <= 0x7fff; |
| case BPF_JGT: |
| case BPF_JLE: |
| case BPF_JSGT: |
| case BPF_JSLE: |
| /* imm + 1 must be 16 bits */ |
| return imm >= -0x8001 && imm <= 0x7ffe; |
| } |
| return false; |
| } |
| |
| /* Invert a conditional jump operation */ |
| static u8 invert_jmp(u8 op) |
| { |
| switch (op) { |
| case BPF_JA: return JIT_JNOP; |
| case BPF_JEQ: return BPF_JNE; |
| case BPF_JNE: return BPF_JEQ; |
| case BPF_JSET: return JIT_JNSET; |
| case BPF_JGT: return BPF_JLE; |
| case BPF_JGE: return BPF_JLT; |
| case BPF_JLT: return BPF_JGE; |
| case BPF_JLE: return BPF_JGT; |
| case BPF_JSGT: return BPF_JSLE; |
| case BPF_JSGE: return BPF_JSLT; |
| case BPF_JSLT: return BPF_JSGE; |
| case BPF_JSLE: return BPF_JSGT; |
| } |
| return 0; |
| } |
| |
| /* Prepare a PC-relative jump operation */ |
| static void setup_jmp(struct jit_context *ctx, u8 bpf_op, |
| s16 bpf_off, u8 *jit_op, s32 *jit_off) |
| { |
| u32 *descp = &ctx->descriptors[ctx->bpf_index]; |
| int op = bpf_op; |
| int offset = 0; |
| |
| /* Do not compute offsets on the first pass */ |
| if (INDEX(*descp) == 0) |
| goto done; |
| |
| /* Skip jumps never taken */ |
| if (bpf_op == JIT_JNOP) |
| goto done; |
| |
| /* Convert jumps always taken */ |
| if (bpf_op == BPF_JA) |
| *descp |= JIT_DESC_CONVERT; |
| |
| /* |
| * Current ctx->jit_index points to the start of the branch preamble. |
| * Since the preamble differs among different branch conditionals, |
| * the current index cannot be used to compute the branch offset. |
| * Instead, we use the offset table value for the next instruction, |
| * which gives the index immediately after the branch delay slot. |
| */ |
| if (!CONVERTED(*descp)) { |
| int target = ctx->bpf_index + bpf_off + 1; |
| int origin = ctx->bpf_index + 1; |
| |
| offset = (INDEX(ctx->descriptors[target]) - |
| INDEX(ctx->descriptors[origin]) + 1) * sizeof(u32); |
| } |
| |
| /* |
| * The PC-relative branch offset field on MIPS is 18 bits signed, |
| * so if the computed offset is larger than this we generate a an |
| * absolute jump that we skip with an inverted conditional branch. |
| */ |
| if (CONVERTED(*descp) || offset < -0x20000 || offset > 0x1ffff) { |
| offset = 3 * sizeof(u32); |
| op = invert_jmp(bpf_op); |
| ctx->changes += !CONVERTED(*descp); |
| *descp |= JIT_DESC_CONVERT; |
| } |
| |
| done: |
| *jit_off = offset; |
| *jit_op = op; |
| } |
| |
| /* Prepare a PC-relative jump operation with immediate conditional */ |
| void setup_jmp_i(struct jit_context *ctx, s32 imm, u8 width, |
| u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off) |
| { |
| bool always = false; |
| bool never = false; |
| |
| switch (bpf_op) { |
| case BPF_JEQ: |
| case BPF_JNE: |
| break; |
| case BPF_JSET: |
| case BPF_JLT: |
| never = imm == 0; |
| break; |
| case BPF_JGE: |
| always = imm == 0; |
| break; |
| case BPF_JGT: |
| never = (u32)imm == U32_MAX; |
| break; |
| case BPF_JLE: |
| always = (u32)imm == U32_MAX; |
| break; |
| case BPF_JSGT: |
| never = imm == S32_MAX && width == 32; |
| break; |
| case BPF_JSGE: |
| always = imm == S32_MIN && width == 32; |
| break; |
| case BPF_JSLT: |
| never = imm == S32_MIN && width == 32; |
| break; |
| case BPF_JSLE: |
| always = imm == S32_MAX && width == 32; |
| break; |
| } |
| |
| if (never) |
| bpf_op = JIT_JNOP; |
| if (always) |
| bpf_op = BPF_JA; |
| setup_jmp(ctx, bpf_op, bpf_off, jit_op, jit_off); |
| } |
| |
| /* Prepare a PC-relative jump operation with register conditional */ |
| void setup_jmp_r(struct jit_context *ctx, bool same_reg, |
| u8 bpf_op, s16 bpf_off, u8 *jit_op, s32 *jit_off) |
| { |
| switch (bpf_op) { |
| case BPF_JSET: |
| break; |
| case BPF_JEQ: |
| case BPF_JGE: |
| case BPF_JLE: |
| case BPF_JSGE: |
| case BPF_JSLE: |
| if (same_reg) |
| bpf_op = BPF_JA; |
| break; |
| case BPF_JNE: |
| case BPF_JLT: |
| case BPF_JGT: |
| case BPF_JSGT: |
| case BPF_JSLT: |
| if (same_reg) |
| bpf_op = JIT_JNOP; |
| break; |
| } |
| setup_jmp(ctx, bpf_op, bpf_off, jit_op, jit_off); |
| } |
| |
| /* Finish a PC-relative jump operation */ |
| int finish_jmp(struct jit_context *ctx, u8 jit_op, s16 bpf_off) |
| { |
| /* Emit conditional branch delay slot */ |
| if (jit_op != JIT_JNOP) |
| emit(ctx, nop); |
| /* |
| * Emit an absolute long jump with delay slot, |
| * if the PC-relative branch was converted. |
| */ |
| if (CONVERTED(ctx->descriptors[ctx->bpf_index])) { |
| int target = get_target(ctx, ctx->bpf_index + bpf_off + 1); |
| |
| if (target < 0) |
| return -1; |
| emit(ctx, j, target); |
| emit(ctx, nop); |
| } |
| return 0; |
| } |
| |
| /* Jump immediate (32-bit) */ |
| void emit_jmp_i(struct jit_context *ctx, u8 dst, s32 imm, s32 off, u8 op) |
| { |
| switch (op) { |
| /* No-op, used internally for branch optimization */ |
| case JIT_JNOP: |
| break; |
| /* PC += off if dst & imm */ |
| case BPF_JSET: |
| emit(ctx, andi, MIPS_R_T9, dst, (u16)imm); |
| emit(ctx, bnez, MIPS_R_T9, off); |
| break; |
| /* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */ |
| case JIT_JNSET: |
| emit(ctx, andi, MIPS_R_T9, dst, (u16)imm); |
| emit(ctx, beqz, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst > imm */ |
| case BPF_JGT: |
| emit(ctx, sltiu, MIPS_R_T9, dst, imm + 1); |
| emit(ctx, beqz, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst >= imm */ |
| case BPF_JGE: |
| emit(ctx, sltiu, MIPS_R_T9, dst, imm); |
| emit(ctx, beqz, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst < imm */ |
| case BPF_JLT: |
| emit(ctx, sltiu, MIPS_R_T9, dst, imm); |
| emit(ctx, bnez, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst <= imm */ |
| case BPF_JLE: |
| emit(ctx, sltiu, MIPS_R_T9, dst, imm + 1); |
| emit(ctx, bnez, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst > imm (signed) */ |
| case BPF_JSGT: |
| emit(ctx, slti, MIPS_R_T9, dst, imm + 1); |
| emit(ctx, beqz, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst >= imm (signed) */ |
| case BPF_JSGE: |
| emit(ctx, slti, MIPS_R_T9, dst, imm); |
| emit(ctx, beqz, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst < imm (signed) */ |
| case BPF_JSLT: |
| emit(ctx, slti, MIPS_R_T9, dst, imm); |
| emit(ctx, bnez, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst <= imm (signed) */ |
| case BPF_JSLE: |
| emit(ctx, slti, MIPS_R_T9, dst, imm + 1); |
| emit(ctx, bnez, MIPS_R_T9, off); |
| break; |
| } |
| } |
| |
| /* Jump register (32-bit) */ |
| void emit_jmp_r(struct jit_context *ctx, u8 dst, u8 src, s32 off, u8 op) |
| { |
| switch (op) { |
| /* No-op, used internally for branch optimization */ |
| case JIT_JNOP: |
| break; |
| /* PC += off if dst == src */ |
| case BPF_JEQ: |
| emit(ctx, beq, dst, src, off); |
| break; |
| /* PC += off if dst != src */ |
| case BPF_JNE: |
| emit(ctx, bne, dst, src, off); |
| break; |
| /* PC += off if dst & src */ |
| case BPF_JSET: |
| emit(ctx, and, MIPS_R_T9, dst, src); |
| emit(ctx, bnez, MIPS_R_T9, off); |
| break; |
| /* PC += off if (dst & imm) == 0 (not in BPF, used for long jumps) */ |
| case JIT_JNSET: |
| emit(ctx, and, MIPS_R_T9, dst, src); |
| emit(ctx, beqz, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst > src */ |
| case BPF_JGT: |
| emit(ctx, sltu, MIPS_R_T9, src, dst); |
| emit(ctx, bnez, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst >= src */ |
| case BPF_JGE: |
| emit(ctx, sltu, MIPS_R_T9, dst, src); |
| emit(ctx, beqz, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst < src */ |
| case BPF_JLT: |
| emit(ctx, sltu, MIPS_R_T9, dst, src); |
| emit(ctx, bnez, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst <= src */ |
| case BPF_JLE: |
| emit(ctx, sltu, MIPS_R_T9, src, dst); |
| emit(ctx, beqz, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst > src (signed) */ |
| case BPF_JSGT: |
| emit(ctx, slt, MIPS_R_T9, src, dst); |
| emit(ctx, bnez, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst >= src (signed) */ |
| case BPF_JSGE: |
| emit(ctx, slt, MIPS_R_T9, dst, src); |
| emit(ctx, beqz, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst < src (signed) */ |
| case BPF_JSLT: |
| emit(ctx, slt, MIPS_R_T9, dst, src); |
| emit(ctx, bnez, MIPS_R_T9, off); |
| break; |
| /* PC += off if dst <= src (signed) */ |
| case BPF_JSLE: |
| emit(ctx, slt, MIPS_R_T9, src, dst); |
| emit(ctx, beqz, MIPS_R_T9, off); |
| break; |
| } |
| } |
| |
| /* Jump always */ |
| int emit_ja(struct jit_context *ctx, s16 off) |
| { |
| int target = get_target(ctx, ctx->bpf_index + off + 1); |
| |
| if (target < 0) |
| return -1; |
| emit(ctx, j, target); |
| emit(ctx, nop); |
| return 0; |
| } |
| |
| /* Jump to epilogue */ |
| int emit_exit(struct jit_context *ctx) |
| { |
| int target = get_target(ctx, ctx->program->len); |
| |
| if (target < 0) |
| return -1; |
| emit(ctx, j, target); |
| emit(ctx, nop); |
| return 0; |
| } |
| |
| /* Build the program body from eBPF bytecode */ |
| static int build_body(struct jit_context *ctx) |
| { |
| const struct bpf_prog *prog = ctx->program; |
| unsigned int i; |
| |
| ctx->stack_used = 0; |
| for (i = 0; i < prog->len; i++) { |
| const struct bpf_insn *insn = &prog->insnsi[i]; |
| u32 *descp = &ctx->descriptors[i]; |
| int ret; |
| |
| access_reg(ctx, insn->src_reg); |
| access_reg(ctx, insn->dst_reg); |
| |
| ctx->bpf_index = i; |
| if (ctx->target == NULL) { |
| ctx->changes += INDEX(*descp) != ctx->jit_index; |
| *descp &= JIT_DESC_CONVERT; |
| *descp |= ctx->jit_index; |
| } |
| |
| ret = build_insn(insn, ctx); |
| if (ret < 0) |
| return ret; |
| |
| if (ret > 0) { |
| i++; |
| if (ctx->target == NULL) |
| descp[1] = ctx->jit_index; |
| } |
| } |
| |
| /* Store the end offset, where the epilogue begins */ |
| ctx->descriptors[prog->len] = ctx->jit_index; |
| return 0; |
| } |
| |
| /* Set the branch conversion flag on all instructions */ |
| static void set_convert_flag(struct jit_context *ctx, bool enable) |
| { |
| const struct bpf_prog *prog = ctx->program; |
| u32 flag = enable ? JIT_DESC_CONVERT : 0; |
| unsigned int i; |
| |
| for (i = 0; i <= prog->len; i++) |
| ctx->descriptors[i] = INDEX(ctx->descriptors[i]) | flag; |
| } |
| |
| static void jit_fill_hole(void *area, unsigned int size) |
| { |
| u32 *p; |
| |
| /* We are guaranteed to have aligned memory. */ |
| for (p = area; size >= sizeof(u32); size -= sizeof(u32)) |
| uasm_i_break(&p, BRK_BUG); /* Increments p */ |
| } |
| |
| bool bpf_jit_needs_zext(void) |
| { |
| return true; |
| } |
| |
| struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog) |
| { |
| struct bpf_prog *tmp, *orig_prog = prog; |
| struct bpf_binary_header *header = NULL; |
| struct jit_context ctx; |
| bool tmp_blinded = false; |
| unsigned int tmp_idx; |
| unsigned int image_size; |
| u8 *image_ptr; |
| int tries; |
| |
| /* |
| * If BPF JIT was not enabled then we must fall back to |
| * the interpreter. |
| */ |
| if (!prog->jit_requested) |
| return orig_prog; |
| /* |
| * If constant blinding was enabled and we failed during blinding |
| * then we must fall back to the interpreter. Otherwise, we save |
| * the new JITed code. |
| */ |
| tmp = bpf_jit_blind_constants(prog); |
| if (IS_ERR(tmp)) |
| return orig_prog; |
| if (tmp != prog) { |
| tmp_blinded = true; |
| prog = tmp; |
| } |
| |
| memset(&ctx, 0, sizeof(ctx)); |
| ctx.program = prog; |
| |
| /* |
| * Not able to allocate memory for descriptors[], then |
| * we must fall back to the interpreter |
| */ |
| ctx.descriptors = kcalloc(prog->len + 1, sizeof(*ctx.descriptors), |
| GFP_KERNEL); |
| if (ctx.descriptors == NULL) |
| goto out_err; |
| |
| /* First pass discovers used resources */ |
| if (build_body(&ctx) < 0) |
| goto out_err; |
| /* |
| * Second pass computes instruction offsets. |
| * If any PC-relative branches are out of range, a sequence of |
| * a PC-relative branch + a jump is generated, and we have to |
| * try again from the beginning to generate the new offsets. |
| * This is done until no additional conversions are necessary. |
| * The last two iterations are done with all branches being |
| * converted, to guarantee offset table convergence within a |
| * fixed number of iterations. |
| */ |
| ctx.jit_index = 0; |
| build_prologue(&ctx); |
| tmp_idx = ctx.jit_index; |
| |
| tries = JIT_MAX_ITERATIONS; |
| do { |
| ctx.jit_index = tmp_idx; |
| ctx.changes = 0; |
| if (tries == 2) |
| set_convert_flag(&ctx, true); |
| if (build_body(&ctx) < 0) |
| goto out_err; |
| } while (ctx.changes > 0 && --tries > 0); |
| |
| if (WARN_ONCE(ctx.changes > 0, "JIT offsets failed to converge")) |
| goto out_err; |
| |
| build_epilogue(&ctx, MIPS_R_RA); |
| |
| /* Now we know the size of the structure to make */ |
| image_size = sizeof(u32) * ctx.jit_index; |
| header = bpf_jit_binary_alloc(image_size, &image_ptr, |
| sizeof(u32), jit_fill_hole); |
| /* |
| * Not able to allocate memory for the structure then |
| * we must fall back to the interpretation |
| */ |
| if (header == NULL) |
| goto out_err; |
| |
| /* Actual pass to generate final JIT code */ |
| ctx.target = (u32 *)image_ptr; |
| ctx.jit_index = 0; |
| |
| /* |
| * If building the JITed code fails somehow, |
| * we fall back to the interpretation. |
| */ |
| build_prologue(&ctx); |
| if (build_body(&ctx) < 0) |
| goto out_err; |
| build_epilogue(&ctx, MIPS_R_RA); |
| |
| /* Populate line info meta data */ |
| set_convert_flag(&ctx, false); |
| bpf_prog_fill_jited_linfo(prog, &ctx.descriptors[1]); |
| |
| /* Set as read-only exec and flush instruction cache */ |
| if (bpf_jit_binary_lock_ro(header)) |
| goto out_err; |
| flush_icache_range((unsigned long)header, |
| (unsigned long)&ctx.target[ctx.jit_index]); |
| |
| if (bpf_jit_enable > 1) |
| bpf_jit_dump(prog->len, image_size, 2, ctx.target); |
| |
| prog->bpf_func = (void *)ctx.target; |
| prog->jited = 1; |
| prog->jited_len = image_size; |
| |
| out: |
| if (tmp_blinded) |
| bpf_jit_prog_release_other(prog, prog == orig_prog ? |
| tmp : orig_prog); |
| kfree(ctx.descriptors); |
| return prog; |
| |
| out_err: |
| prog = orig_prog; |
| if (header) |
| bpf_jit_binary_free(header); |
| goto out; |
| } |