| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright IBM Corp. 2012 |
| * |
| * Author(s): |
| * Jan Glauber <jang@linux.vnet.ibm.com> |
| */ |
| |
| #define KMSG_COMPONENT "zpci" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/stat.h> |
| #include <linux/pci.h> |
| |
| #include "../../../drivers/pci/pci.h" |
| |
| #include <asm/sclp.h> |
| |
| #define zpci_attr(name, fmt, member) \ |
| static ssize_t name##_show(struct device *dev, \ |
| struct device_attribute *attr, char *buf) \ |
| { \ |
| struct zpci_dev *zdev = to_zpci(to_pci_dev(dev)); \ |
| \ |
| return sysfs_emit(buf, fmt, zdev->member); \ |
| } \ |
| static DEVICE_ATTR_RO(name) |
| |
| zpci_attr(function_id, "0x%08x\n", fid); |
| zpci_attr(function_handle, "0x%08x\n", fh); |
| zpci_attr(pchid, "0x%04x\n", pchid); |
| zpci_attr(pfgid, "0x%02x\n", pfgid); |
| zpci_attr(vfn, "0x%04x\n", vfn); |
| zpci_attr(pft, "0x%02x\n", pft); |
| zpci_attr(port, "%d\n", port); |
| zpci_attr(fidparm, "0x%02x\n", fidparm); |
| zpci_attr(uid, "0x%x\n", uid); |
| zpci_attr(segment0, "0x%02x\n", pfip[0]); |
| zpci_attr(segment1, "0x%02x\n", pfip[1]); |
| zpci_attr(segment2, "0x%02x\n", pfip[2]); |
| zpci_attr(segment3, "0x%02x\n", pfip[3]); |
| |
| static ssize_t mio_enabled_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct zpci_dev *zdev = to_zpci(to_pci_dev(dev)); |
| |
| return sysfs_emit(buf, zpci_use_mio(zdev) ? "1\n" : "0\n"); |
| } |
| static DEVICE_ATTR_RO(mio_enabled); |
| |
| static int _do_recover(struct pci_dev *pdev, struct zpci_dev *zdev) |
| { |
| u8 status; |
| int ret; |
| |
| pci_stop_and_remove_bus_device(pdev); |
| if (zdev_enabled(zdev)) { |
| ret = zpci_disable_device(zdev); |
| /* |
| * Due to a z/VM vs LPAR inconsistency in the error |
| * state the FH may indicate an enabled device but |
| * disable says the device is already disabled don't |
| * treat it as an error here. |
| */ |
| if (ret == -EINVAL) |
| ret = 0; |
| if (ret) |
| return ret; |
| } |
| |
| ret = zpci_enable_device(zdev); |
| if (ret) |
| return ret; |
| |
| if (zdev->dma_table) { |
| ret = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma, |
| virt_to_phys(zdev->dma_table), &status); |
| if (ret) |
| zpci_disable_device(zdev); |
| } |
| return ret; |
| } |
| |
| static ssize_t recover_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct kernfs_node *kn; |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct zpci_dev *zdev = to_zpci(pdev); |
| int ret = 0; |
| |
| /* Can't use device_remove_self() here as that would lead us to lock |
| * the pci_rescan_remove_lock while holding the device' kernfs lock. |
| * This would create a possible deadlock with disable_slot() which is |
| * not directly protected by the device' kernfs lock but takes it |
| * during the device removal which happens under |
| * pci_rescan_remove_lock. |
| * |
| * This is analogous to sdev_store_delete() in |
| * drivers/scsi/scsi_sysfs.c |
| */ |
| kn = sysfs_break_active_protection(&dev->kobj, &attr->attr); |
| WARN_ON_ONCE(!kn); |
| |
| /* Device needs to be configured and state must not change */ |
| mutex_lock(&zdev->state_lock); |
| if (zdev->state != ZPCI_FN_STATE_CONFIGURED) |
| goto out; |
| |
| /* device_remove_file() serializes concurrent calls ignoring all but |
| * the first |
| */ |
| device_remove_file(dev, attr); |
| |
| /* A concurrent call to recover_store() may slip between |
| * sysfs_break_active_protection() and the sysfs file removal. |
| * Once it unblocks from pci_lock_rescan_remove() the original pdev |
| * will already be removed. |
| */ |
| pci_lock_rescan_remove(); |
| if (pci_dev_is_added(pdev)) { |
| ret = _do_recover(pdev, zdev); |
| } |
| pci_rescan_bus(zdev->zbus->bus); |
| pci_unlock_rescan_remove(); |
| |
| out: |
| mutex_unlock(&zdev->state_lock); |
| if (kn) |
| sysfs_unbreak_active_protection(kn); |
| return ret ? ret : count; |
| } |
| static DEVICE_ATTR_WO(recover); |
| |
| static ssize_t util_string_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *attr, char *buf, |
| loff_t off, size_t count) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct zpci_dev *zdev = to_zpci(pdev); |
| |
| return memory_read_from_buffer(buf, count, &off, zdev->util_str, |
| sizeof(zdev->util_str)); |
| } |
| static BIN_ATTR_RO(util_string, CLP_UTIL_STR_LEN); |
| |
| static ssize_t report_error_write(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *attr, char *buf, |
| loff_t off, size_t count) |
| { |
| struct zpci_report_error_header *report = (void *) buf; |
| struct device *dev = kobj_to_dev(kobj); |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct zpci_dev *zdev = to_zpci(pdev); |
| int ret; |
| |
| if (off || (count < sizeof(*report))) |
| return -EINVAL; |
| |
| ret = sclp_pci_report(report, zdev->fh, zdev->fid); |
| |
| return ret ? ret : count; |
| } |
| static BIN_ATTR(report_error, S_IWUSR, NULL, report_error_write, PAGE_SIZE); |
| |
| static ssize_t uid_is_unique_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sysfs_emit(buf, "%d\n", zpci_unique_uid ? 1 : 0); |
| } |
| static DEVICE_ATTR_RO(uid_is_unique); |
| |
| /* analogous to smbios index */ |
| static ssize_t index_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct zpci_dev *zdev = to_zpci(to_pci_dev(dev)); |
| u32 index = ~0; |
| |
| if (zpci_unique_uid) |
| index = zdev->uid; |
| |
| return sysfs_emit(buf, "%u\n", index); |
| } |
| static DEVICE_ATTR_RO(index); |
| |
| static umode_t zpci_index_is_visible(struct kobject *kobj, |
| struct attribute *attr, int n) |
| { |
| return zpci_unique_uid ? attr->mode : 0; |
| } |
| |
| static struct attribute *zpci_ident_attrs[] = { |
| &dev_attr_index.attr, |
| NULL, |
| }; |
| |
| const struct attribute_group zpci_ident_attr_group = { |
| .attrs = zpci_ident_attrs, |
| .is_visible = zpci_index_is_visible, |
| }; |
| |
| static struct bin_attribute *zpci_bin_attrs[] = { |
| &bin_attr_util_string, |
| &bin_attr_report_error, |
| NULL, |
| }; |
| |
| static struct attribute *zpci_dev_attrs[] = { |
| &dev_attr_function_id.attr, |
| &dev_attr_function_handle.attr, |
| &dev_attr_pchid.attr, |
| &dev_attr_pfgid.attr, |
| &dev_attr_pft.attr, |
| &dev_attr_port.attr, |
| &dev_attr_fidparm.attr, |
| &dev_attr_vfn.attr, |
| &dev_attr_uid.attr, |
| &dev_attr_recover.attr, |
| &dev_attr_mio_enabled.attr, |
| &dev_attr_uid_is_unique.attr, |
| NULL, |
| }; |
| |
| const struct attribute_group zpci_attr_group = { |
| .attrs = zpci_dev_attrs, |
| .bin_attrs = zpci_bin_attrs, |
| }; |
| |
| static struct attribute *pfip_attrs[] = { |
| &dev_attr_segment0.attr, |
| &dev_attr_segment1.attr, |
| &dev_attr_segment2.attr, |
| &dev_attr_segment3.attr, |
| NULL, |
| }; |
| |
| const struct attribute_group pfip_attr_group = { |
| .name = "pfip", |
| .attrs = pfip_attrs, |
| }; |