| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Freescale QorIQ AHCI SATA platform driver |
| * |
| * Copyright 2015 Freescale, Inc. |
| * Tang Yuantian <Yuantian.Tang@freescale.com> |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pm.h> |
| #include <linux/ahci_platform.h> |
| #include <linux/device.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/libata.h> |
| #include "ahci.h" |
| |
| #define DRV_NAME "ahci-qoriq" |
| |
| /* port register definition */ |
| #define PORT_PHY1 0xA8 |
| #define PORT_PHY2 0xAC |
| #define PORT_PHY3 0xB0 |
| #define PORT_PHY4 0xB4 |
| #define PORT_PHY5 0xB8 |
| #define PORT_AXICC 0xBC |
| #define PORT_TRANS 0xC8 |
| |
| /* port register default value */ |
| #define AHCI_PORT_PHY_1_CFG 0xa003fffe |
| #define AHCI_PORT_PHY2_CFG 0x28184d1f |
| #define AHCI_PORT_PHY3_CFG 0x0e081509 |
| #define AHCI_PORT_TRANS_CFG 0x08000029 |
| #define AHCI_PORT_AXICC_CFG 0x3fffffff |
| |
| /* for ls1021a */ |
| #define LS1021A_PORT_PHY2 0x28183414 |
| #define LS1021A_PORT_PHY3 0x0e080e06 |
| #define LS1021A_PORT_PHY4 0x064a080b |
| #define LS1021A_PORT_PHY5 0x2aa86470 |
| #define LS1021A_AXICC_ADDR 0xC0 |
| |
| #define SATA_ECC_DISABLE 0x00020000 |
| #define ECC_DIS_ARMV8_CH2 0x80000000 |
| #define ECC_DIS_LS1088A 0x40000000 |
| |
| enum ahci_qoriq_type { |
| AHCI_LS1021A, |
| AHCI_LS1028A, |
| AHCI_LS1043A, |
| AHCI_LS2080A, |
| AHCI_LS1046A, |
| AHCI_LS1088A, |
| AHCI_LS2088A, |
| AHCI_LX2160A, |
| }; |
| |
| struct ahci_qoriq_priv { |
| struct ccsr_ahci *reg_base; |
| enum ahci_qoriq_type type; |
| void __iomem *ecc_addr; |
| bool is_dmacoherent; |
| }; |
| |
| static bool ecc_initialized; |
| |
| static const struct of_device_id ahci_qoriq_of_match[] = { |
| { .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A}, |
| { .compatible = "fsl,ls1028a-ahci", .data = (void *)AHCI_LS1028A}, |
| { .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A}, |
| { .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A}, |
| { .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A}, |
| { .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A}, |
| { .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A}, |
| { .compatible = "fsl,lx2160a-ahci", .data = (void *)AHCI_LX2160A}, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match); |
| |
| static const struct acpi_device_id ahci_qoriq_acpi_match[] = { |
| {"NXP0004", .driver_data = (kernel_ulong_t)AHCI_LX2160A}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, ahci_qoriq_acpi_match); |
| |
| static int ahci_qoriq_hardreset(struct ata_link *link, unsigned int *class, |
| unsigned long deadline) |
| { |
| const unsigned int *timing = sata_ehc_deb_timing(&link->eh_context); |
| void __iomem *port_mmio = ahci_port_base(link->ap); |
| u32 px_cmd, px_is, px_val; |
| struct ata_port *ap = link->ap; |
| struct ahci_port_priv *pp = ap->private_data; |
| struct ahci_host_priv *hpriv = ap->host->private_data; |
| struct ahci_qoriq_priv *qoriq_priv = hpriv->plat_data; |
| u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; |
| struct ata_taskfile tf; |
| bool online; |
| int rc; |
| bool ls1021a_workaround = (qoriq_priv->type == AHCI_LS1021A); |
| |
| hpriv->stop_engine(ap); |
| |
| /* |
| * There is a errata on ls1021a Rev1.0 and Rev2.0 which is: |
| * A-009042: The device detection initialization sequence |
| * mistakenly resets some registers. |
| * |
| * Workaround for this is: |
| * The software should read and store PxCMD and PxIS values |
| * before issuing the device detection initialization sequence. |
| * After the sequence is complete, software should restore the |
| * PxCMD and PxIS with the stored values. |
| */ |
| if (ls1021a_workaround) { |
| px_cmd = readl(port_mmio + PORT_CMD); |
| px_is = readl(port_mmio + PORT_IRQ_STAT); |
| } |
| |
| /* clear D2H reception area to properly wait for D2H FIS */ |
| ata_tf_init(link->device, &tf); |
| tf.status = ATA_BUSY; |
| ata_tf_to_fis(&tf, 0, 0, d2h_fis); |
| |
| rc = sata_link_hardreset(link, timing, deadline, &online, |
| ahci_check_ready); |
| |
| /* restore the PxCMD and PxIS on ls1021 */ |
| if (ls1021a_workaround) { |
| px_val = readl(port_mmio + PORT_CMD); |
| if (px_val != px_cmd) |
| writel(px_cmd, port_mmio + PORT_CMD); |
| |
| px_val = readl(port_mmio + PORT_IRQ_STAT); |
| if (px_val != px_is) |
| writel(px_is, port_mmio + PORT_IRQ_STAT); |
| } |
| |
| hpriv->start_engine(ap); |
| |
| if (online) |
| *class = ahci_dev_classify(ap); |
| return rc; |
| } |
| |
| static struct ata_port_operations ahci_qoriq_ops = { |
| .inherits = &ahci_ops, |
| .hardreset = ahci_qoriq_hardreset, |
| }; |
| |
| static const struct ata_port_info ahci_qoriq_port_info = { |
| .flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ, |
| .pio_mask = ATA_PIO4, |
| .udma_mask = ATA_UDMA6, |
| .port_ops = &ahci_qoriq_ops, |
| }; |
| |
| static const struct scsi_host_template ahci_qoriq_sht = { |
| AHCI_SHT(DRV_NAME), |
| }; |
| |
| static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) |
| { |
| struct ahci_qoriq_priv *qpriv = hpriv->plat_data; |
| void __iomem *reg_base = hpriv->mmio; |
| |
| switch (qpriv->type) { |
| case AHCI_LS1021A: |
| if (!(qpriv->ecc_addr || ecc_initialized)) |
| return -EINVAL; |
| else if (qpriv->ecc_addr && !ecc_initialized) |
| writel(SATA_ECC_DISABLE, qpriv->ecc_addr); |
| writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); |
| writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2); |
| writel(LS1021A_PORT_PHY3, reg_base + PORT_PHY3); |
| writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4); |
| writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5); |
| writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); |
| if (qpriv->is_dmacoherent) |
| writel(AHCI_PORT_AXICC_CFG, |
| reg_base + LS1021A_AXICC_ADDR); |
| break; |
| |
| case AHCI_LS1043A: |
| if (!(qpriv->ecc_addr || ecc_initialized)) |
| return -EINVAL; |
| else if (qpriv->ecc_addr && !ecc_initialized) |
| writel(readl(qpriv->ecc_addr) | |
| ECC_DIS_ARMV8_CH2, |
| qpriv->ecc_addr); |
| writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); |
| writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2); |
| writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); |
| writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); |
| if (qpriv->is_dmacoherent) |
| writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); |
| break; |
| |
| case AHCI_LS2080A: |
| writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); |
| writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2); |
| writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); |
| writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); |
| if (qpriv->is_dmacoherent) |
| writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); |
| break; |
| |
| case AHCI_LS1046A: |
| if (!(qpriv->ecc_addr || ecc_initialized)) |
| return -EINVAL; |
| else if (qpriv->ecc_addr && !ecc_initialized) |
| writel(readl(qpriv->ecc_addr) | |
| ECC_DIS_ARMV8_CH2, |
| qpriv->ecc_addr); |
| writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); |
| writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2); |
| writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); |
| writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); |
| if (qpriv->is_dmacoherent) |
| writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); |
| break; |
| |
| case AHCI_LS1028A: |
| case AHCI_LS1088A: |
| case AHCI_LX2160A: |
| if (!(qpriv->ecc_addr || ecc_initialized)) |
| return -EINVAL; |
| else if (qpriv->ecc_addr && !ecc_initialized) |
| writel(readl(qpriv->ecc_addr) | |
| ECC_DIS_LS1088A, |
| qpriv->ecc_addr); |
| writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); |
| writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2); |
| writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); |
| writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); |
| if (qpriv->is_dmacoherent) |
| writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); |
| break; |
| |
| case AHCI_LS2088A: |
| writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); |
| writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2); |
| writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); |
| writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); |
| if (qpriv->is_dmacoherent) |
| writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); |
| break; |
| } |
| |
| ecc_initialized = true; |
| return 0; |
| } |
| |
| static int ahci_qoriq_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| const struct acpi_device_id *acpi_id; |
| struct device *dev = &pdev->dev; |
| struct ahci_host_priv *hpriv; |
| struct ahci_qoriq_priv *qoriq_priv; |
| const struct of_device_id *of_id; |
| struct resource *res; |
| int rc; |
| |
| hpriv = ahci_platform_get_resources(pdev, 0); |
| if (IS_ERR(hpriv)) |
| return PTR_ERR(hpriv); |
| |
| of_id = of_match_node(ahci_qoriq_of_match, np); |
| acpi_id = acpi_match_device(ahci_qoriq_acpi_match, &pdev->dev); |
| if (!(of_id || acpi_id)) |
| return -ENODEV; |
| |
| qoriq_priv = devm_kzalloc(dev, sizeof(*qoriq_priv), GFP_KERNEL); |
| if (!qoriq_priv) |
| return -ENOMEM; |
| |
| if (of_id) |
| qoriq_priv->type = (unsigned long)of_id->data; |
| else |
| qoriq_priv->type = (enum ahci_qoriq_type)acpi_id->driver_data; |
| |
| if (unlikely(!ecc_initialized)) { |
| res = platform_get_resource_byname(pdev, |
| IORESOURCE_MEM, |
| "sata-ecc"); |
| if (res) { |
| qoriq_priv->ecc_addr = |
| devm_ioremap_resource(dev, res); |
| if (IS_ERR(qoriq_priv->ecc_addr)) |
| return PTR_ERR(qoriq_priv->ecc_addr); |
| } |
| } |
| |
| if (device_get_dma_attr(&pdev->dev) == DEV_DMA_COHERENT) |
| qoriq_priv->is_dmacoherent = true; |
| |
| rc = ahci_platform_enable_resources(hpriv); |
| if (rc) |
| return rc; |
| |
| hpriv->plat_data = qoriq_priv; |
| rc = ahci_qoriq_phy_init(hpriv); |
| if (rc) |
| goto disable_resources; |
| |
| rc = ahci_platform_init_host(pdev, hpriv, &ahci_qoriq_port_info, |
| &ahci_qoriq_sht); |
| if (rc) |
| goto disable_resources; |
| |
| return 0; |
| |
| disable_resources: |
| ahci_platform_disable_resources(hpriv); |
| |
| return rc; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int ahci_qoriq_resume(struct device *dev) |
| { |
| struct ata_host *host = dev_get_drvdata(dev); |
| struct ahci_host_priv *hpriv = host->private_data; |
| int rc; |
| |
| rc = ahci_platform_enable_resources(hpriv); |
| if (rc) |
| return rc; |
| |
| rc = ahci_qoriq_phy_init(hpriv); |
| if (rc) |
| goto disable_resources; |
| |
| rc = ahci_platform_resume_host(dev); |
| if (rc) |
| goto disable_resources; |
| |
| /* We resumed so update PM runtime state */ |
| pm_runtime_disable(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| |
| return 0; |
| |
| disable_resources: |
| ahci_platform_disable_resources(hpriv); |
| |
| return rc; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(ahci_qoriq_pm_ops, ahci_platform_suspend, |
| ahci_qoriq_resume); |
| |
| static struct platform_driver ahci_qoriq_driver = { |
| .probe = ahci_qoriq_probe, |
| .remove = ata_platform_remove_one, |
| .driver = { |
| .name = DRV_NAME, |
| .of_match_table = ahci_qoriq_of_match, |
| .acpi_match_table = ahci_qoriq_acpi_match, |
| .pm = &ahci_qoriq_pm_ops, |
| }, |
| }; |
| module_platform_driver(ahci_qoriq_driver); |
| |
| MODULE_DESCRIPTION("Freescale QorIQ AHCI SATA platform driver"); |
| MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>"); |
| MODULE_LICENSE("GPL"); |