drivers/dma/mv_xor.h - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2007, 2008, Marvell International Ltd.
  */

 #ifndef MV_XOR_H
 #define MV_XOR_H

 #include <linux/types.h>
 #include <linux/io.h>
 #include <linux/dmaengine.h>
 #include <linux/interrupt.h>

 #define MV_XOR_POOL_SIZE		(MV_XOR_SLOT_SIZE * 3072)
 #define MV_XOR_SLOT_SIZE		64
 #define MV_XOR_THRESHOLD		1
 #define MV_XOR_MAX_CHANNELS             2

 #define MV_XOR_MIN_BYTE_COUNT		SZ_128
 #define MV_XOR_MAX_BYTE_COUNT		(SZ_16M - 1)

 /* Values for the XOR_CONFIG register */
 #define XOR_OPERATION_MODE_XOR		0
 #define XOR_OPERATION_MODE_MEMCPY	2
 #define XOR_OPERATION_MODE_IN_DESC      7
 #define XOR_DESCRIPTOR_SWAP		BIT(14)
 #define XOR_DESC_SUCCESS		0x40000000

 #define XOR_DESC_OPERATION_XOR          (0 << 24)
 #define XOR_DESC_OPERATION_CRC32C       (1 << 24)
 #define XOR_DESC_OPERATION_MEMCPY       (2 << 24)

 #define XOR_DESC_DMA_OWNED		BIT(31)
 #define XOR_DESC_EOD_INT_EN		BIT(31)

 #define XOR_CURR_DESC(chan)	(chan->mmr_high_base + 0x10 + (chan->idx * 4))
 #define XOR_NEXT_DESC(chan)	(chan->mmr_high_base + 0x00 + (chan->idx * 4))
 #define XOR_BYTE_COUNT(chan)	(chan->mmr_high_base + 0x20 + (chan->idx * 4))
 #define XOR_DEST_POINTER(chan)	(chan->mmr_high_base + 0xB0 + (chan->idx * 4))
 #define XOR_BLOCK_SIZE(chan)	(chan->mmr_high_base + 0xC0 + (chan->idx * 4))
 #define XOR_INIT_VALUE_LOW(chan)	(chan->mmr_high_base + 0xE0)
 #define XOR_INIT_VALUE_HIGH(chan)	(chan->mmr_high_base + 0xE4)

 #define XOR_CONFIG(chan)	(chan->mmr_base + 0x10 + (chan->idx * 4))
 #define XOR_ACTIVATION(chan)	(chan->mmr_base + 0x20 + (chan->idx * 4))
 #define XOR_INTR_CAUSE(chan)	(chan->mmr_base + 0x30)
 #define XOR_INTR_MASK(chan)	(chan->mmr_base + 0x40)
 #define XOR_ERROR_CAUSE(chan)	(chan->mmr_base + 0x50)
 #define XOR_ERROR_ADDR(chan)	(chan->mmr_base + 0x60)

 #define XOR_INT_END_OF_DESC	BIT(0)
 #define XOR_INT_END_OF_CHAIN	BIT(1)
 #define XOR_INT_STOPPED		BIT(2)
 #define XOR_INT_PAUSED		BIT(3)
 #define XOR_INT_ERR_DECODE	BIT(4)
 #define XOR_INT_ERR_RDPROT	BIT(5)
 #define XOR_INT_ERR_WRPROT	BIT(6)
 #define XOR_INT_ERR_OWN		BIT(7)
 #define XOR_INT_ERR_PAR		BIT(8)
 #define XOR_INT_ERR_MBUS	BIT(9)

 #define XOR_INTR_ERRORS		(XOR_INT_ERR_DECODE | XOR_INT_ERR_RDPROT | \
 				 XOR_INT_ERR_WRPROT | XOR_INT_ERR_OWN    | \
 				 XOR_INT_ERR_PAR    | XOR_INT_ERR_MBUS)

 #define XOR_INTR_MASK_VALUE	(XOR_INT_END_OF_DESC | XOR_INT_END_OF_CHAIN | \
 				 XOR_INT_STOPPED     | XOR_INTR_ERRORS)

 #define WINDOW_BASE(w)		(0x50 + ((w) << 2))
 #define WINDOW_SIZE(w)		(0x70 + ((w) << 2))
 #define WINDOW_REMAP_HIGH(w)	(0x90 + ((w) << 2))
 #define WINDOW_BAR_ENABLE(chan)	(0x40 + ((chan) << 2))
 #define WINDOW_OVERRIDE_CTRL(chan)	(0xA0 + ((chan) << 2))

 #define WINDOW_COUNT		8

 struct mv_xor_device {
 	void __iomem	     *xor_base;
 	void __iomem	     *xor_high_base;
 	struct clk	     *clk;
 	struct mv_xor_chan   *channels[MV_XOR_MAX_CHANNELS];
 	int		     xor_type;

 	u32                  win_start[WINDOW_COUNT];
 	u32                  win_end[WINDOW_COUNT];
 };

 /**
  * struct mv_xor_chan - internal representation of a XOR channel
  * @pending: allows batching of hardware operations
  * @lock: serializes enqueue/dequeue operations to the descriptors pool
  * @mmr_base: memory mapped register base
  * @idx: the index of the xor channel
  * @chain: device chain view of the descriptors
  * @free_slots: free slots usable by the channel
  * @allocated_slots: slots allocated by the driver
  * @completed_slots: slots completed by HW but still need to be acked
  * @device: parent device
  * @common: common dmaengine channel object members
  * @slots_allocated: records the actual size of the descriptor slot pool
  * @irq_tasklet: bottom half where mv_xor_slot_cleanup runs
  * @op_in_desc: new mode of driver, each op is written to descriptor.
  */
 struct mv_xor_chan {
 	int			pending;
 	spinlock_t		lock; /* protects the descriptor slot pool */
 	void __iomem		*mmr_base;
 	void __iomem		*mmr_high_base;
 	unsigned int		idx;
 	int                     irq;
 	struct list_head	chain;
 	struct list_head	free_slots;
 	struct list_head	allocated_slots;
 	struct list_head	completed_slots;
 	dma_addr_t		dma_desc_pool;
 	void			*dma_desc_pool_virt;
 	size_t                  pool_size;
 	struct dma_device	dmadev;
 	struct dma_chan		dmachan;
 	int			slots_allocated;
 	struct tasklet_struct	irq_tasklet;
 	int                     op_in_desc;
 	char			dummy_src[MV_XOR_MIN_BYTE_COUNT];
 	char			dummy_dst[MV_XOR_MIN_BYTE_COUNT];
 	dma_addr_t		dummy_src_addr, dummy_dst_addr;
 	u32                     saved_config_reg, saved_int_mask_reg;

 	struct mv_xor_device	*xordev;
 };

 /**
  * struct mv_xor_desc_slot - software descriptor
  * @node: node on the mv_xor_chan lists
  * @hw_desc: virtual address of the hardware descriptor chain
  * @phys: hardware address of the hardware descriptor chain
  * @slot_used: slot in use or not
  * @idx: pool index
  * @tx_list: list of slots that make up a multi-descriptor transaction
  * @async_tx: support for the async_tx api
  */
 struct mv_xor_desc_slot {
 	struct list_head	node;
 	struct list_head	sg_tx_list;
 	enum dma_transaction_type	type;
 	void			*hw_desc;
 	u16			idx;
 	struct dma_async_tx_descriptor	async_tx;
 };

 /*
  * This structure describes XOR descriptor size 64bytes. The
  * mv_phy_src_idx() macro must be used when indexing the values of the
  * phy_src_addr[] array. This is due to the fact that the 'descriptor
  * swap' feature, used on big endian systems, swaps descriptors data
  * within blocks of 8 bytes. So two consecutive values of the
  * phy_src_addr[] array are actually swapped in big-endian, which
  * explains the different mv_phy_src_idx() implementation.
  */
 #if defined(__LITTLE_ENDIAN)
 struct mv_xor_desc {
 	u32 status;		/* descriptor execution status */
 	u32 crc32_result;	/* result of CRC-32 calculation */
 	u32 desc_command;	/* type of operation to be carried out */
 	u32 phy_next_desc;	/* next descriptor address pointer */
 	u32 byte_count;		/* size of src/dst blocks in bytes */
 	u32 phy_dest_addr;	/* destination block address */
 	u32 phy_src_addr[8];	/* source block addresses */
 	u32 reserved0;
 	u32 reserved1;
 };
 #define mv_phy_src_idx(src_idx) (src_idx)
 #else
 struct mv_xor_desc {
 	u32 crc32_result;	/* result of CRC-32 calculation */
 	u32 status;		/* descriptor execution status */
 	u32 phy_next_desc;	/* next descriptor address pointer */
 	u32 desc_command;	/* type of operation to be carried out */
 	u32 phy_dest_addr;	/* destination block address */
 	u32 byte_count;		/* size of src/dst blocks in bytes */
 	u32 phy_src_addr[8];	/* source block addresses */
 	u32 reserved1;
 	u32 reserved0;
 };
 #define mv_phy_src_idx(src_idx) (src_idx ^ 1)
 #endif

 #define to_mv_sw_desc(addr_hw_desc)		\
 	container_of(addr_hw_desc, struct mv_xor_desc_slot, hw_desc)

 #define mv_hw_desc_slot_idx(hw_desc, idx)	\
 	((void *)(((unsigned long)hw_desc) + ((idx) << 5)))

 #endif
	/* SPDX-License-Identifier: GPL-2.0-only */
	/*
	* Copyright (C) 2007, 2008, Marvell International Ltd.
	*/

	#ifndef MV_XOR_H
	#define MV_XOR_H

	#include <linux/types.h>
	#include <linux/io.h>
	#include <linux/dmaengine.h>
	#include <linux/interrupt.h>

	#define MV_XOR_POOL_SIZE (MV_XOR_SLOT_SIZE * 3072)
	#define MV_XOR_SLOT_SIZE 64
	#define MV_XOR_THRESHOLD 1
	#define MV_XOR_MAX_CHANNELS 2

	#define MV_XOR_MIN_BYTE_COUNT SZ_128
	#define MV_XOR_MAX_BYTE_COUNT (SZ_16M - 1)

	/* Values for the XOR_CONFIG register */
	#define XOR_OPERATION_MODE_XOR 0
	#define XOR_OPERATION_MODE_MEMCPY 2
	#define XOR_OPERATION_MODE_IN_DESC 7
	#define XOR_DESCRIPTOR_SWAP BIT(14)
	#define XOR_DESC_SUCCESS 0x40000000

	#define XOR_DESC_OPERATION_XOR (0 << 24)
	#define XOR_DESC_OPERATION_CRC32C (1 << 24)
	#define XOR_DESC_OPERATION_MEMCPY (2 << 24)

	#define XOR_DESC_DMA_OWNED BIT(31)
	#define XOR_DESC_EOD_INT_EN BIT(31)

	#define XOR_CURR_DESC(chan) (chan->mmr_high_base + 0x10 + (chan->idx * 4))
	#define XOR_NEXT_DESC(chan) (chan->mmr_high_base + 0x00 + (chan->idx * 4))
	#define XOR_BYTE_COUNT(chan) (chan->mmr_high_base + 0x20 + (chan->idx * 4))
	#define XOR_DEST_POINTER(chan) (chan->mmr_high_base + 0xB0 + (chan->idx * 4))
	#define XOR_BLOCK_SIZE(chan) (chan->mmr_high_base + 0xC0 + (chan->idx * 4))
	#define XOR_INIT_VALUE_LOW(chan) (chan->mmr_high_base + 0xE0)
	#define XOR_INIT_VALUE_HIGH(chan) (chan->mmr_high_base + 0xE4)

	#define XOR_CONFIG(chan) (chan->mmr_base + 0x10 + (chan->idx * 4))
	#define XOR_ACTIVATION(chan) (chan->mmr_base + 0x20 + (chan->idx * 4))
	#define XOR_INTR_CAUSE(chan) (chan->mmr_base + 0x30)
	#define XOR_INTR_MASK(chan) (chan->mmr_base + 0x40)
	#define XOR_ERROR_CAUSE(chan) (chan->mmr_base + 0x50)
	#define XOR_ERROR_ADDR(chan) (chan->mmr_base + 0x60)

	#define XOR_INT_END_OF_DESC BIT(0)
	#define XOR_INT_END_OF_CHAIN BIT(1)
	#define XOR_INT_STOPPED BIT(2)
	#define XOR_INT_PAUSED BIT(3)
	#define XOR_INT_ERR_DECODE BIT(4)
	#define XOR_INT_ERR_RDPROT BIT(5)
	#define XOR_INT_ERR_WRPROT BIT(6)
	#define XOR_INT_ERR_OWN BIT(7)
	#define XOR_INT_ERR_PAR BIT(8)
	#define XOR_INT_ERR_MBUS BIT(9)

	#define XOR_INTR_ERRORS (XOR_INT_ERR_DECODE \| XOR_INT_ERR_RDPROT \| \
	XOR_INT_ERR_WRPROT \| XOR_INT_ERR_OWN \| \
	XOR_INT_ERR_PAR \| XOR_INT_ERR_MBUS)

	#define XOR_INTR_MASK_VALUE (XOR_INT_END_OF_DESC \| XOR_INT_END_OF_CHAIN \| \
	XOR_INT_STOPPED \| XOR_INTR_ERRORS)

	#define WINDOW_BASE(w) (0x50 + ((w) << 2))
	#define WINDOW_SIZE(w) (0x70 + ((w) << 2))
	#define WINDOW_REMAP_HIGH(w) (0x90 + ((w) << 2))
	#define WINDOW_BAR_ENABLE(chan) (0x40 + ((chan) << 2))
	#define WINDOW_OVERRIDE_CTRL(chan) (0xA0 + ((chan) << 2))

	#define WINDOW_COUNT 8

	struct mv_xor_device {
	void __iomem *xor_base;
	void __iomem *xor_high_base;
	struct clk *clk;
	struct mv_xor_chan *channels[MV_XOR_MAX_CHANNELS];
	int xor_type;

	u32 win_start[WINDOW_COUNT];
	u32 win_end[WINDOW_COUNT];
	};

	/**
	* struct mv_xor_chan - internal representation of a XOR channel
	* @pending: allows batching of hardware operations
	* @lock: serializes enqueue/dequeue operations to the descriptors pool
	* @mmr_base: memory mapped register base
	* @idx: the index of the xor channel
	* @chain: device chain view of the descriptors
	* @free_slots: free slots usable by the channel
	* @allocated_slots: slots allocated by the driver
	* @completed_slots: slots completed by HW but still need to be acked
	* @device: parent device
	* @common: common dmaengine channel object members
	* @slots_allocated: records the actual size of the descriptor slot pool
	* @irq_tasklet: bottom half where mv_xor_slot_cleanup runs
	* @op_in_desc: new mode of driver, each op is written to descriptor.
	*/
	struct mv_xor_chan {
	int pending;
	spinlock_t lock; /* protects the descriptor slot pool */
	void __iomem *mmr_base;
	void __iomem *mmr_high_base;
	unsigned int idx;
	int irq;
	struct list_head chain;
	struct list_head free_slots;
	struct list_head allocated_slots;
	struct list_head completed_slots;
	dma_addr_t dma_desc_pool;
	void *dma_desc_pool_virt;
	size_t pool_size;
	struct dma_device dmadev;
	struct dma_chan dmachan;
	int slots_allocated;
	struct tasklet_struct irq_tasklet;
	int op_in_desc;
	char dummy_src[MV_XOR_MIN_BYTE_COUNT];
	char dummy_dst[MV_XOR_MIN_BYTE_COUNT];
	dma_addr_t dummy_src_addr, dummy_dst_addr;
	u32 saved_config_reg, saved_int_mask_reg;

	struct mv_xor_device *xordev;
	};

	/**
	* struct mv_xor_desc_slot - software descriptor
	* @node: node on the mv_xor_chan lists
	* @hw_desc: virtual address of the hardware descriptor chain
	* @phys: hardware address of the hardware descriptor chain
	* @slot_used: slot in use or not
	* @idx: pool index
	* @tx_list: list of slots that make up a multi-descriptor transaction
	* @async_tx: support for the async_tx api
	*/
	struct mv_xor_desc_slot {
	struct list_head node;
	struct list_head sg_tx_list;
	enum dma_transaction_type type;
	void *hw_desc;
	u16 idx;
	struct dma_async_tx_descriptor async_tx;
	};

	/*
	* This structure describes XOR descriptor size 64bytes. The
	* mv_phy_src_idx() macro must be used when indexing the values of the
	* phy_src_addr[] array. This is due to the fact that the 'descriptor
	* swap' feature, used on big endian systems, swaps descriptors data
	* within blocks of 8 bytes. So two consecutive values of the
	* phy_src_addr[] array are actually swapped in big-endian, which
	* explains the different mv_phy_src_idx() implementation.
	*/
	#if defined(__LITTLE_ENDIAN)
	struct mv_xor_desc {
	u32 status; /* descriptor execution status */
	u32 crc32_result; /* result of CRC-32 calculation */
	u32 desc_command; /* type of operation to be carried out */
	u32 phy_next_desc; /* next descriptor address pointer */
	u32 byte_count; /* size of src/dst blocks in bytes */
	u32 phy_dest_addr; /* destination block address */
	u32 phy_src_addr[8]; /* source block addresses */
	u32 reserved0;
	u32 reserved1;
	};
	#define mv_phy_src_idx(src_idx) (src_idx)
	#else
	struct mv_xor_desc {
	u32 crc32_result; /* result of CRC-32 calculation */
	u32 status; /* descriptor execution status */
	u32 phy_next_desc; /* next descriptor address pointer */
	u32 desc_command; /* type of operation to be carried out */
	u32 phy_dest_addr; /* destination block address */
	u32 byte_count; /* size of src/dst blocks in bytes */
	u32 phy_src_addr[8]; /* source block addresses */
	u32 reserved1;
	u32 reserved0;
	};
	#define mv_phy_src_idx(src_idx) (src_idx ^ 1)
	#endif

	#define to_mv_sw_desc(addr_hw_desc) \
	container_of(addr_hw_desc, struct mv_xor_desc_slot, hw_desc)

	#define mv_hw_desc_slot_idx(hw_desc, idx) \
	((void *)(((unsigned long)hw_desc) + ((idx) << 5)))

	#endif