| /* |
| * Copyright © 2008 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| * |
| * Authors: |
| * Keith Packard <keithp@keithp.com> |
| * |
| */ |
| |
| #include <linux/export.h> |
| #include <linux/i2c.h> |
| #include <linux/notifier.h> |
| #include <linux/slab.h> |
| #include <linux/sort.h> |
| #include <linux/string_helpers.h> |
| #include <linux/timekeeping.h> |
| #include <linux/types.h> |
| |
| #include <asm/byteorder.h> |
| |
| #include <drm/display/drm_dp_helper.h> |
| #include <drm/display/drm_dp_tunnel.h> |
| #include <drm/display/drm_dsc_helper.h> |
| #include <drm/display/drm_hdmi_helper.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_fixed.h> |
| #include <drm/drm_probe_helper.h> |
| |
| #include "g4x_dp.h" |
| #include "i915_drv.h" |
| #include "i915_irq.h" |
| #include "i915_reg.h" |
| #include "intel_alpm.h" |
| #include "intel_atomic.h" |
| #include "intel_audio.h" |
| #include "intel_backlight.h" |
| #include "intel_combo_phy_regs.h" |
| #include "intel_connector.h" |
| #include "intel_crtc.h" |
| #include "intel_cx0_phy.h" |
| #include "intel_ddi.h" |
| #include "intel_de.h" |
| #include "intel_display_driver.h" |
| #include "intel_display_types.h" |
| #include "intel_dp.h" |
| #include "intel_dp_aux.h" |
| #include "intel_dp_hdcp.h" |
| #include "intel_dp_link_training.h" |
| #include "intel_dp_mst.h" |
| #include "intel_dp_tunnel.h" |
| #include "intel_dpio_phy.h" |
| #include "intel_dpll.h" |
| #include "intel_drrs.h" |
| #include "intel_encoder.h" |
| #include "intel_fifo_underrun.h" |
| #include "intel_hdcp.h" |
| #include "intel_hdmi.h" |
| #include "intel_hotplug.h" |
| #include "intel_hotplug_irq.h" |
| #include "intel_lspcon.h" |
| #include "intel_lvds.h" |
| #include "intel_modeset_lock.h" |
| #include "intel_panel.h" |
| #include "intel_pch_display.h" |
| #include "intel_pps.h" |
| #include "intel_psr.h" |
| #include "intel_quirks.h" |
| #include "intel_tc.h" |
| #include "intel_vdsc.h" |
| #include "intel_vrr.h" |
| #include "intel_crtc_state_dump.h" |
| |
| #define dp_to_i915(__intel_dp) to_i915(dp_to_dig_port(__intel_dp)->base.base.dev) |
| |
| /* DP DSC throughput values used for slice count calculations KPixels/s */ |
| #define DP_DSC_PEAK_PIXEL_RATE 2720000 |
| #define DP_DSC_MAX_ENC_THROUGHPUT_0 340000 |
| #define DP_DSC_MAX_ENC_THROUGHPUT_1 400000 |
| |
| /* Max DSC line buffer depth supported by HW. */ |
| #define INTEL_DP_DSC_MAX_LINE_BUF_DEPTH 13 |
| |
| /* DP DSC FEC Overhead factor in ppm = 1/(0.972261) = 1.028530 */ |
| #define DP_DSC_FEC_OVERHEAD_FACTOR 1028530 |
| |
| /* Compliance test status bits */ |
| #define INTEL_DP_RESOLUTION_SHIFT_MASK 0 |
| #define INTEL_DP_RESOLUTION_PREFERRED (1 << INTEL_DP_RESOLUTION_SHIFT_MASK) |
| #define INTEL_DP_RESOLUTION_STANDARD (2 << INTEL_DP_RESOLUTION_SHIFT_MASK) |
| #define INTEL_DP_RESOLUTION_FAILSAFE (3 << INTEL_DP_RESOLUTION_SHIFT_MASK) |
| |
| |
| /* Constants for DP DSC configurations */ |
| static const u8 valid_dsc_bpp[] = {6, 8, 10, 12, 15}; |
| |
| /* With Single pipe configuration, HW is capable of supporting maximum |
| * of 4 slices per line. |
| */ |
| static const u8 valid_dsc_slicecount[] = {1, 2, 4}; |
| |
| /** |
| * intel_dp_is_edp - is the given port attached to an eDP panel (either CPU or PCH) |
| * @intel_dp: DP struct |
| * |
| * If a CPU or PCH DP output is attached to an eDP panel, this function |
| * will return true, and false otherwise. |
| * |
| * This function is not safe to use prior to encoder type being set. |
| */ |
| bool intel_dp_is_edp(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| |
| return dig_port->base.type == INTEL_OUTPUT_EDP; |
| } |
| |
| static void intel_dp_unset_edid(struct intel_dp *intel_dp); |
| |
| /* Is link rate UHBR and thus 128b/132b? */ |
| bool intel_dp_is_uhbr(const struct intel_crtc_state *crtc_state) |
| { |
| return drm_dp_is_uhbr_rate(crtc_state->port_clock); |
| } |
| |
| /** |
| * intel_dp_link_symbol_size - get the link symbol size for a given link rate |
| * @rate: link rate in 10kbit/s units |
| * |
| * Returns the link symbol size in bits/symbol units depending on the link |
| * rate -> channel coding. |
| */ |
| int intel_dp_link_symbol_size(int rate) |
| { |
| return drm_dp_is_uhbr_rate(rate) ? 32 : 10; |
| } |
| |
| /** |
| * intel_dp_link_symbol_clock - convert link rate to link symbol clock |
| * @rate: link rate in 10kbit/s units |
| * |
| * Returns the link symbol clock frequency in kHz units depending on the |
| * link rate and channel coding. |
| */ |
| int intel_dp_link_symbol_clock(int rate) |
| { |
| return DIV_ROUND_CLOSEST(rate * 10, intel_dp_link_symbol_size(rate)); |
| } |
| |
| static int max_dprx_rate(struct intel_dp *intel_dp) |
| { |
| if (intel_dp_tunnel_bw_alloc_is_enabled(intel_dp)) |
| return drm_dp_tunnel_max_dprx_rate(intel_dp->tunnel); |
| |
| return drm_dp_bw_code_to_link_rate(intel_dp->dpcd[DP_MAX_LINK_RATE]); |
| } |
| |
| static int max_dprx_lane_count(struct intel_dp *intel_dp) |
| { |
| if (intel_dp_tunnel_bw_alloc_is_enabled(intel_dp)) |
| return drm_dp_tunnel_max_dprx_lane_count(intel_dp->tunnel); |
| |
| return drm_dp_max_lane_count(intel_dp->dpcd); |
| } |
| |
| static void intel_dp_set_default_sink_rates(struct intel_dp *intel_dp) |
| { |
| intel_dp->sink_rates[0] = 162000; |
| intel_dp->num_sink_rates = 1; |
| } |
| |
| /* update sink rates from dpcd */ |
| static void intel_dp_set_dpcd_sink_rates(struct intel_dp *intel_dp) |
| { |
| static const int dp_rates[] = { |
| 162000, 270000, 540000, 810000 |
| }; |
| int i, max_rate; |
| int max_lttpr_rate; |
| |
| if (drm_dp_has_quirk(&intel_dp->desc, DP_DPCD_QUIRK_CAN_DO_MAX_LINK_RATE_3_24_GBPS)) { |
| /* Needed, e.g., for Apple MBP 2017, 15 inch eDP Retina panel */ |
| static const int quirk_rates[] = { 162000, 270000, 324000 }; |
| |
| memcpy(intel_dp->sink_rates, quirk_rates, sizeof(quirk_rates)); |
| intel_dp->num_sink_rates = ARRAY_SIZE(quirk_rates); |
| |
| return; |
| } |
| |
| /* |
| * Sink rates for 8b/10b. |
| */ |
| max_rate = max_dprx_rate(intel_dp); |
| max_lttpr_rate = drm_dp_lttpr_max_link_rate(intel_dp->lttpr_common_caps); |
| if (max_lttpr_rate) |
| max_rate = min(max_rate, max_lttpr_rate); |
| |
| for (i = 0; i < ARRAY_SIZE(dp_rates); i++) { |
| if (dp_rates[i] > max_rate) |
| break; |
| intel_dp->sink_rates[i] = dp_rates[i]; |
| } |
| |
| /* |
| * Sink rates for 128b/132b. If set, sink should support all 8b/10b |
| * rates and 10 Gbps. |
| */ |
| if (drm_dp_128b132b_supported(intel_dp->dpcd)) { |
| u8 uhbr_rates = 0; |
| |
| BUILD_BUG_ON(ARRAY_SIZE(intel_dp->sink_rates) < ARRAY_SIZE(dp_rates) + 3); |
| |
| drm_dp_dpcd_readb(&intel_dp->aux, |
| DP_128B132B_SUPPORTED_LINK_RATES, &uhbr_rates); |
| |
| if (drm_dp_lttpr_count(intel_dp->lttpr_common_caps)) { |
| /* We have a repeater */ |
| if (intel_dp->lttpr_common_caps[0] >= 0x20 && |
| intel_dp->lttpr_common_caps[DP_MAIN_LINK_CHANNEL_CODING_PHY_REPEATER - |
| DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV] & |
| DP_PHY_REPEATER_128B132B_SUPPORTED) { |
| /* Repeater supports 128b/132b, valid UHBR rates */ |
| uhbr_rates &= intel_dp->lttpr_common_caps[DP_PHY_REPEATER_128B132B_RATES - |
| DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV]; |
| } else { |
| /* Does not support 128b/132b */ |
| uhbr_rates = 0; |
| } |
| } |
| |
| if (uhbr_rates & DP_UHBR10) |
| intel_dp->sink_rates[i++] = 1000000; |
| if (uhbr_rates & DP_UHBR13_5) |
| intel_dp->sink_rates[i++] = 1350000; |
| if (uhbr_rates & DP_UHBR20) |
| intel_dp->sink_rates[i++] = 2000000; |
| } |
| |
| intel_dp->num_sink_rates = i; |
| } |
| |
| static void intel_dp_set_sink_rates(struct intel_dp *intel_dp) |
| { |
| struct intel_connector *connector = intel_dp->attached_connector; |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct intel_encoder *encoder = &intel_dig_port->base; |
| |
| intel_dp_set_dpcd_sink_rates(intel_dp); |
| |
| if (intel_dp->num_sink_rates) |
| return; |
| |
| drm_err(&dp_to_i915(intel_dp)->drm, |
| "[CONNECTOR:%d:%s][ENCODER:%d:%s] Invalid DPCD with no link rates, using defaults\n", |
| connector->base.base.id, connector->base.name, |
| encoder->base.base.id, encoder->base.name); |
| |
| intel_dp_set_default_sink_rates(intel_dp); |
| } |
| |
| static void intel_dp_set_default_max_sink_lane_count(struct intel_dp *intel_dp) |
| { |
| intel_dp->max_sink_lane_count = 1; |
| } |
| |
| static void intel_dp_set_max_sink_lane_count(struct intel_dp *intel_dp) |
| { |
| struct intel_connector *connector = intel_dp->attached_connector; |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct intel_encoder *encoder = &intel_dig_port->base; |
| |
| intel_dp->max_sink_lane_count = max_dprx_lane_count(intel_dp); |
| |
| switch (intel_dp->max_sink_lane_count) { |
| case 1: |
| case 2: |
| case 4: |
| return; |
| } |
| |
| drm_err(&dp_to_i915(intel_dp)->drm, |
| "[CONNECTOR:%d:%s][ENCODER:%d:%s] Invalid DPCD max lane count (%d), using default\n", |
| connector->base.base.id, connector->base.name, |
| encoder->base.base.id, encoder->base.name, |
| intel_dp->max_sink_lane_count); |
| |
| intel_dp_set_default_max_sink_lane_count(intel_dp); |
| } |
| |
| /* Get length of rates array potentially limited by max_rate. */ |
| static int intel_dp_rate_limit_len(const int *rates, int len, int max_rate) |
| { |
| int i; |
| |
| /* Limit results by potentially reduced max rate */ |
| for (i = 0; i < len; i++) { |
| if (rates[len - i - 1] <= max_rate) |
| return len - i; |
| } |
| |
| return 0; |
| } |
| |
| /* Get length of common rates array potentially limited by max_rate. */ |
| static int intel_dp_common_len_rate_limit(const struct intel_dp *intel_dp, |
| int max_rate) |
| { |
| return intel_dp_rate_limit_len(intel_dp->common_rates, |
| intel_dp->num_common_rates, max_rate); |
| } |
| |
| int intel_dp_common_rate(struct intel_dp *intel_dp, int index) |
| { |
| if (drm_WARN_ON(&dp_to_i915(intel_dp)->drm, |
| index < 0 || index >= intel_dp->num_common_rates)) |
| return 162000; |
| |
| return intel_dp->common_rates[index]; |
| } |
| |
| /* Theoretical max between source and sink */ |
| int intel_dp_max_common_rate(struct intel_dp *intel_dp) |
| { |
| return intel_dp_common_rate(intel_dp, intel_dp->num_common_rates - 1); |
| } |
| |
| int intel_dp_max_source_lane_count(struct intel_digital_port *dig_port) |
| { |
| int vbt_max_lanes = intel_bios_dp_max_lane_count(dig_port->base.devdata); |
| int max_lanes = dig_port->max_lanes; |
| |
| if (vbt_max_lanes) |
| max_lanes = min(max_lanes, vbt_max_lanes); |
| |
| return max_lanes; |
| } |
| |
| /* Theoretical max between source and sink */ |
| int intel_dp_max_common_lane_count(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| int source_max = intel_dp_max_source_lane_count(dig_port); |
| int sink_max = intel_dp->max_sink_lane_count; |
| int lane_max = intel_tc_port_max_lane_count(dig_port); |
| int lttpr_max = drm_dp_lttpr_max_lane_count(intel_dp->lttpr_common_caps); |
| |
| if (lttpr_max) |
| sink_max = min(sink_max, lttpr_max); |
| |
| return min3(source_max, sink_max, lane_max); |
| } |
| |
| static int forced_lane_count(struct intel_dp *intel_dp) |
| { |
| return clamp(intel_dp->link.force_lane_count, 1, intel_dp_max_common_lane_count(intel_dp)); |
| } |
| |
| int intel_dp_max_lane_count(struct intel_dp *intel_dp) |
| { |
| int lane_count; |
| |
| if (intel_dp->link.force_lane_count) |
| lane_count = forced_lane_count(intel_dp); |
| else |
| lane_count = intel_dp->link.max_lane_count; |
| |
| switch (lane_count) { |
| case 1: |
| case 2: |
| case 4: |
| return lane_count; |
| default: |
| MISSING_CASE(lane_count); |
| return 1; |
| } |
| } |
| |
| static int intel_dp_min_lane_count(struct intel_dp *intel_dp) |
| { |
| if (intel_dp->link.force_lane_count) |
| return forced_lane_count(intel_dp); |
| |
| return 1; |
| } |
| |
| /* |
| * The required data bandwidth for a mode with given pixel clock and bpp. This |
| * is the required net bandwidth independent of the data bandwidth efficiency. |
| * |
| * TODO: check if callers of this functions should use |
| * intel_dp_effective_data_rate() instead. |
| */ |
| int |
| intel_dp_link_required(int pixel_clock, int bpp) |
| { |
| /* pixel_clock is in kHz, divide bpp by 8 for bit to Byte conversion */ |
| return DIV_ROUND_UP(pixel_clock * bpp, 8); |
| } |
| |
| /** |
| * intel_dp_effective_data_rate - Return the pixel data rate accounting for BW allocation overhead |
| * @pixel_clock: pixel clock in kHz |
| * @bpp_x16: bits per pixel .4 fixed point format |
| * @bw_overhead: BW allocation overhead in 1ppm units |
| * |
| * Return the effective pixel data rate in kB/sec units taking into account |
| * the provided SSC, FEC, DSC BW allocation overhead. |
| */ |
| int intel_dp_effective_data_rate(int pixel_clock, int bpp_x16, |
| int bw_overhead) |
| { |
| return DIV_ROUND_UP_ULL(mul_u32_u32(pixel_clock * bpp_x16, bw_overhead), |
| 1000000 * 16 * 8); |
| } |
| |
| /** |
| * intel_dp_max_link_data_rate: Calculate the maximum rate for the given link params |
| * @intel_dp: Intel DP object |
| * @max_dprx_rate: Maximum data rate of the DPRX |
| * @max_dprx_lanes: Maximum lane count of the DPRX |
| * |
| * Calculate the maximum data rate for the provided link parameters taking into |
| * account any BW limitations by a DP tunnel attached to @intel_dp. |
| * |
| * Returns the maximum data rate in kBps units. |
| */ |
| int intel_dp_max_link_data_rate(struct intel_dp *intel_dp, |
| int max_dprx_rate, int max_dprx_lanes) |
| { |
| int max_rate = drm_dp_max_dprx_data_rate(max_dprx_rate, max_dprx_lanes); |
| |
| if (intel_dp_tunnel_bw_alloc_is_enabled(intel_dp)) |
| max_rate = min(max_rate, |
| drm_dp_tunnel_available_bw(intel_dp->tunnel)); |
| |
| return max_rate; |
| } |
| |
| bool intel_dp_has_joiner(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); |
| struct intel_encoder *encoder = &intel_dig_port->base; |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| |
| /* eDP MSO is not compatible with joiner */ |
| if (intel_dp->mso_link_count) |
| return false; |
| |
| return DISPLAY_VER(dev_priv) >= 12 || |
| (DISPLAY_VER(dev_priv) == 11 && |
| encoder->port != PORT_A); |
| } |
| |
| static int dg2_max_source_rate(struct intel_dp *intel_dp) |
| { |
| return intel_dp_is_edp(intel_dp) ? 810000 : 1350000; |
| } |
| |
| static int icl_max_source_rate(struct intel_dp *intel_dp) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| |
| if (intel_encoder_is_combo(encoder) && !intel_dp_is_edp(intel_dp)) |
| return 540000; |
| |
| return 810000; |
| } |
| |
| static int ehl_max_source_rate(struct intel_dp *intel_dp) |
| { |
| if (intel_dp_is_edp(intel_dp)) |
| return 540000; |
| |
| return 810000; |
| } |
| |
| static int mtl_max_source_rate(struct intel_dp *intel_dp) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| |
| if (intel_encoder_is_c10phy(encoder)) |
| return 810000; |
| |
| if (DISPLAY_VER_FULL(to_i915(encoder->base.dev)) == IP_VER(14, 1)) |
| return 1350000; |
| |
| return 2000000; |
| } |
| |
| static int vbt_max_link_rate(struct intel_dp *intel_dp) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| int max_rate; |
| |
| max_rate = intel_bios_dp_max_link_rate(encoder->devdata); |
| |
| if (intel_dp_is_edp(intel_dp)) { |
| struct intel_connector *connector = intel_dp->attached_connector; |
| int edp_max_rate = connector->panel.vbt.edp.max_link_rate; |
| |
| if (max_rate && edp_max_rate) |
| max_rate = min(max_rate, edp_max_rate); |
| else if (edp_max_rate) |
| max_rate = edp_max_rate; |
| } |
| |
| return max_rate; |
| } |
| |
| static void |
| intel_dp_set_source_rates(struct intel_dp *intel_dp) |
| { |
| /* The values must be in increasing order */ |
| static const int bmg_rates[] = { |
| 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, |
| 810000, 1000000, 1350000, |
| }; |
| static const int mtl_rates[] = { |
| 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, |
| 810000, 1000000, 2000000, |
| }; |
| static const int icl_rates[] = { |
| 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000, |
| 1000000, 1350000, |
| }; |
| static const int bxt_rates[] = { |
| 162000, 216000, 243000, 270000, 324000, 432000, 540000 |
| }; |
| static const int skl_rates[] = { |
| 162000, 216000, 270000, 324000, 432000, 540000 |
| }; |
| static const int hsw_rates[] = { |
| 162000, 270000, 540000 |
| }; |
| static const int g4x_rates[] = { |
| 162000, 270000 |
| }; |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); |
| const int *source_rates; |
| int size, max_rate = 0, vbt_max_rate; |
| |
| /* This should only be done once */ |
| drm_WARN_ON(&dev_priv->drm, |
| intel_dp->source_rates || intel_dp->num_source_rates); |
| |
| if (DISPLAY_VER(dev_priv) >= 14) { |
| if (IS_BATTLEMAGE(dev_priv)) { |
| source_rates = bmg_rates; |
| size = ARRAY_SIZE(bmg_rates); |
| } else { |
| source_rates = mtl_rates; |
| size = ARRAY_SIZE(mtl_rates); |
| } |
| max_rate = mtl_max_source_rate(intel_dp); |
| } else if (DISPLAY_VER(dev_priv) >= 11) { |
| source_rates = icl_rates; |
| size = ARRAY_SIZE(icl_rates); |
| if (IS_DG2(dev_priv)) |
| max_rate = dg2_max_source_rate(intel_dp); |
| else if (IS_ALDERLAKE_P(dev_priv) || IS_ALDERLAKE_S(dev_priv) || |
| IS_DG1(dev_priv) || IS_ROCKETLAKE(dev_priv)) |
| max_rate = 810000; |
| else if (IS_JASPERLAKE(dev_priv) || IS_ELKHARTLAKE(dev_priv)) |
| max_rate = ehl_max_source_rate(intel_dp); |
| else |
| max_rate = icl_max_source_rate(intel_dp); |
| } else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) { |
| source_rates = bxt_rates; |
| size = ARRAY_SIZE(bxt_rates); |
| } else if (DISPLAY_VER(dev_priv) == 9) { |
| source_rates = skl_rates; |
| size = ARRAY_SIZE(skl_rates); |
| } else if ((IS_HASWELL(dev_priv) && !IS_HASWELL_ULX(dev_priv)) || |
| IS_BROADWELL(dev_priv)) { |
| source_rates = hsw_rates; |
| size = ARRAY_SIZE(hsw_rates); |
| } else { |
| source_rates = g4x_rates; |
| size = ARRAY_SIZE(g4x_rates); |
| } |
| |
| vbt_max_rate = vbt_max_link_rate(intel_dp); |
| if (max_rate && vbt_max_rate) |
| max_rate = min(max_rate, vbt_max_rate); |
| else if (vbt_max_rate) |
| max_rate = vbt_max_rate; |
| |
| if (max_rate) |
| size = intel_dp_rate_limit_len(source_rates, size, max_rate); |
| |
| intel_dp->source_rates = source_rates; |
| intel_dp->num_source_rates = size; |
| } |
| |
| static int intersect_rates(const int *source_rates, int source_len, |
| const int *sink_rates, int sink_len, |
| int *common_rates) |
| { |
| int i = 0, j = 0, k = 0; |
| |
| while (i < source_len && j < sink_len) { |
| if (source_rates[i] == sink_rates[j]) { |
| if (WARN_ON(k >= DP_MAX_SUPPORTED_RATES)) |
| return k; |
| common_rates[k] = source_rates[i]; |
| ++k; |
| ++i; |
| ++j; |
| } else if (source_rates[i] < sink_rates[j]) { |
| ++i; |
| } else { |
| ++j; |
| } |
| } |
| return k; |
| } |
| |
| /* return index of rate in rates array, or -1 if not found */ |
| int intel_dp_rate_index(const int *rates, int len, int rate) |
| { |
| int i; |
| |
| for (i = 0; i < len; i++) |
| if (rate == rates[i]) |
| return i; |
| |
| return -1; |
| } |
| |
| static int intel_dp_link_config_rate(struct intel_dp *intel_dp, |
| const struct intel_dp_link_config *lc) |
| { |
| return intel_dp_common_rate(intel_dp, lc->link_rate_idx); |
| } |
| |
| static int intel_dp_link_config_lane_count(const struct intel_dp_link_config *lc) |
| { |
| return 1 << lc->lane_count_exp; |
| } |
| |
| static int intel_dp_link_config_bw(struct intel_dp *intel_dp, |
| const struct intel_dp_link_config *lc) |
| { |
| return drm_dp_max_dprx_data_rate(intel_dp_link_config_rate(intel_dp, lc), |
| intel_dp_link_config_lane_count(lc)); |
| } |
| |
| static int link_config_cmp_by_bw(const void *a, const void *b, const void *p) |
| { |
| struct intel_dp *intel_dp = (struct intel_dp *)p; /* remove const */ |
| const struct intel_dp_link_config *lc_a = a; |
| const struct intel_dp_link_config *lc_b = b; |
| int bw_a = intel_dp_link_config_bw(intel_dp, lc_a); |
| int bw_b = intel_dp_link_config_bw(intel_dp, lc_b); |
| |
| if (bw_a != bw_b) |
| return bw_a - bw_b; |
| |
| return intel_dp_link_config_rate(intel_dp, lc_a) - |
| intel_dp_link_config_rate(intel_dp, lc_b); |
| } |
| |
| static void intel_dp_link_config_init(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct intel_dp_link_config *lc; |
| int num_common_lane_configs; |
| int i; |
| int j; |
| |
| if (drm_WARN_ON(&i915->drm, !is_power_of_2(intel_dp_max_common_lane_count(intel_dp)))) |
| return; |
| |
| num_common_lane_configs = ilog2(intel_dp_max_common_lane_count(intel_dp)) + 1; |
| |
| if (drm_WARN_ON(&i915->drm, intel_dp->num_common_rates * num_common_lane_configs > |
| ARRAY_SIZE(intel_dp->link.configs))) |
| return; |
| |
| intel_dp->link.num_configs = intel_dp->num_common_rates * num_common_lane_configs; |
| |
| lc = &intel_dp->link.configs[0]; |
| for (i = 0; i < intel_dp->num_common_rates; i++) { |
| for (j = 0; j < num_common_lane_configs; j++) { |
| lc->lane_count_exp = j; |
| lc->link_rate_idx = i; |
| |
| lc++; |
| } |
| } |
| |
| sort_r(intel_dp->link.configs, intel_dp->link.num_configs, |
| sizeof(intel_dp->link.configs[0]), |
| link_config_cmp_by_bw, NULL, |
| intel_dp); |
| } |
| |
| void intel_dp_link_config_get(struct intel_dp *intel_dp, int idx, int *link_rate, int *lane_count) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| const struct intel_dp_link_config *lc; |
| |
| if (drm_WARN_ON(&i915->drm, idx < 0 || idx >= intel_dp->link.num_configs)) |
| idx = 0; |
| |
| lc = &intel_dp->link.configs[idx]; |
| |
| *link_rate = intel_dp_link_config_rate(intel_dp, lc); |
| *lane_count = intel_dp_link_config_lane_count(lc); |
| } |
| |
| int intel_dp_link_config_index(struct intel_dp *intel_dp, int link_rate, int lane_count) |
| { |
| int link_rate_idx = intel_dp_rate_index(intel_dp->common_rates, intel_dp->num_common_rates, |
| link_rate); |
| int lane_count_exp = ilog2(lane_count); |
| int i; |
| |
| for (i = 0; i < intel_dp->link.num_configs; i++) { |
| const struct intel_dp_link_config *lc = &intel_dp->link.configs[i]; |
| |
| if (lc->lane_count_exp == lane_count_exp && |
| lc->link_rate_idx == link_rate_idx) |
| return i; |
| } |
| |
| return -1; |
| } |
| |
| static void intel_dp_set_common_rates(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| drm_WARN_ON(&i915->drm, |
| !intel_dp->num_source_rates || !intel_dp->num_sink_rates); |
| |
| intel_dp->num_common_rates = intersect_rates(intel_dp->source_rates, |
| intel_dp->num_source_rates, |
| intel_dp->sink_rates, |
| intel_dp->num_sink_rates, |
| intel_dp->common_rates); |
| |
| /* Paranoia, there should always be something in common. */ |
| if (drm_WARN_ON(&i915->drm, intel_dp->num_common_rates == 0)) { |
| intel_dp->common_rates[0] = 162000; |
| intel_dp->num_common_rates = 1; |
| } |
| |
| intel_dp_link_config_init(intel_dp); |
| } |
| |
| static bool intel_dp_link_params_valid(struct intel_dp *intel_dp, int link_rate, |
| u8 lane_count) |
| { |
| /* |
| * FIXME: we need to synchronize the current link parameters with |
| * hardware readout. Currently fast link training doesn't work on |
| * boot-up. |
| */ |
| if (link_rate == 0 || |
| link_rate > intel_dp->link.max_rate) |
| return false; |
| |
| if (lane_count == 0 || |
| lane_count > intel_dp_max_lane_count(intel_dp)) |
| return false; |
| |
| return true; |
| } |
| |
| u32 intel_dp_mode_to_fec_clock(u32 mode_clock) |
| { |
| return div_u64(mul_u32_u32(mode_clock, DP_DSC_FEC_OVERHEAD_FACTOR), |
| 1000000U); |
| } |
| |
| int intel_dp_bw_fec_overhead(bool fec_enabled) |
| { |
| /* |
| * TODO: Calculate the actual overhead for a given mode. |
| * The hard-coded 1/0.972261=2.853% overhead factor |
| * corresponds (for instance) to the 8b/10b DP FEC 2.4% + |
| * 0.453% DSC overhead. This is enough for a 3840 width mode, |
| * which has a DSC overhead of up to ~0.2%, but may not be |
| * enough for a 1024 width mode where this is ~0.8% (on a 4 |
| * lane DP link, with 2 DSC slices and 8 bpp color depth). |
| */ |
| return fec_enabled ? DP_DSC_FEC_OVERHEAD_FACTOR : 1000000; |
| } |
| |
| static int |
| small_joiner_ram_size_bits(struct drm_i915_private *i915) |
| { |
| if (DISPLAY_VER(i915) >= 13) |
| return 17280 * 8; |
| else if (DISPLAY_VER(i915) >= 11) |
| return 7680 * 8; |
| else |
| return 6144 * 8; |
| } |
| |
| u32 intel_dp_dsc_nearest_valid_bpp(struct drm_i915_private *i915, u32 bpp, u32 pipe_bpp) |
| { |
| u32 bits_per_pixel = bpp; |
| int i; |
| |
| /* Error out if the max bpp is less than smallest allowed valid bpp */ |
| if (bits_per_pixel < valid_dsc_bpp[0]) { |
| drm_dbg_kms(&i915->drm, "Unsupported BPP %u, min %u\n", |
| bits_per_pixel, valid_dsc_bpp[0]); |
| return 0; |
| } |
| |
| /* From XE_LPD onwards we support from bpc upto uncompressed bpp-1 BPPs */ |
| if (DISPLAY_VER(i915) >= 13) { |
| bits_per_pixel = min(bits_per_pixel, pipe_bpp - 1); |
| |
| /* |
| * According to BSpec, 27 is the max DSC output bpp, |
| * 8 is the min DSC output bpp. |
| * While we can still clamp higher bpp values to 27, saving bandwidth, |
| * if it is required to oompress up to bpp < 8, means we can't do |
| * that and probably means we can't fit the required mode, even with |
| * DSC enabled. |
| */ |
| if (bits_per_pixel < 8) { |
| drm_dbg_kms(&i915->drm, "Unsupported BPP %u, min 8\n", |
| bits_per_pixel); |
| return 0; |
| } |
| bits_per_pixel = min_t(u32, bits_per_pixel, 27); |
| } else { |
| /* Find the nearest match in the array of known BPPs from VESA */ |
| for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) { |
| if (bits_per_pixel < valid_dsc_bpp[i + 1]) |
| break; |
| } |
| drm_dbg_kms(&i915->drm, "Set dsc bpp from %d to VESA %d\n", |
| bits_per_pixel, valid_dsc_bpp[i]); |
| |
| bits_per_pixel = valid_dsc_bpp[i]; |
| } |
| |
| return bits_per_pixel; |
| } |
| |
| static |
| u32 get_max_compressed_bpp_with_joiner(struct drm_i915_private *i915, |
| u32 mode_clock, u32 mode_hdisplay, |
| bool bigjoiner) |
| { |
| u32 max_bpp_small_joiner_ram; |
| |
| /* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */ |
| max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) / mode_hdisplay; |
| |
| if (bigjoiner) { |
| int bigjoiner_interface_bits = DISPLAY_VER(i915) >= 14 ? 36 : 24; |
| /* With bigjoiner multiple dsc engines are used in parallel so PPC is 2 */ |
| int ppc = 2; |
| u32 max_bpp_bigjoiner = |
| i915->display.cdclk.max_cdclk_freq * ppc * bigjoiner_interface_bits / |
| intel_dp_mode_to_fec_clock(mode_clock); |
| |
| max_bpp_small_joiner_ram *= 2; |
| |
| return min(max_bpp_small_joiner_ram, max_bpp_bigjoiner); |
| } |
| |
| return max_bpp_small_joiner_ram; |
| } |
| |
| u16 intel_dp_dsc_get_max_compressed_bpp(struct drm_i915_private *i915, |
| u32 link_clock, u32 lane_count, |
| u32 mode_clock, u32 mode_hdisplay, |
| bool bigjoiner, |
| enum intel_output_format output_format, |
| u32 pipe_bpp, |
| u32 timeslots) |
| { |
| u32 bits_per_pixel, joiner_max_bpp; |
| |
| /* |
| * Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)* |
| * (LinkSymbolClock)* 8 * (TimeSlots / 64) |
| * for SST -> TimeSlots is 64(i.e all TimeSlots that are available) |
| * for MST -> TimeSlots has to be calculated, based on mode requirements |
| * |
| * Due to FEC overhead, the available bw is reduced to 97.2261%. |
| * To support the given mode: |
| * Bandwidth required should be <= Available link Bandwidth * FEC Overhead |
| * =>ModeClock * bits_per_pixel <= Available Link Bandwidth * FEC Overhead |
| * =>bits_per_pixel <= Available link Bandwidth * FEC Overhead / ModeClock |
| * =>bits_per_pixel <= (NumberOfLanes * LinkSymbolClock) * 8 (TimeSlots / 64) / |
| * (ModeClock / FEC Overhead) |
| * =>bits_per_pixel <= (NumberOfLanes * LinkSymbolClock * TimeSlots) / |
| * (ModeClock / FEC Overhead * 8) |
| */ |
| bits_per_pixel = ((link_clock * lane_count) * timeslots) / |
| (intel_dp_mode_to_fec_clock(mode_clock) * 8); |
| |
| /* Bandwidth required for 420 is half, that of 444 format */ |
| if (output_format == INTEL_OUTPUT_FORMAT_YCBCR420) |
| bits_per_pixel *= 2; |
| |
| /* |
| * According to DSC 1.2a Section 4.1.1 Table 4.1 the maximum |
| * supported PPS value can be 63.9375 and with the further |
| * mention that for 420, 422 formats, bpp should be programmed double |
| * the target bpp restricting our target bpp to be 31.9375 at max. |
| */ |
| if (output_format == INTEL_OUTPUT_FORMAT_YCBCR420) |
| bits_per_pixel = min_t(u32, bits_per_pixel, 31); |
| |
| drm_dbg_kms(&i915->drm, "Max link bpp is %u for %u timeslots " |
| "total bw %u pixel clock %u\n", |
| bits_per_pixel, timeslots, |
| (link_clock * lane_count * 8), |
| intel_dp_mode_to_fec_clock(mode_clock)); |
| |
| joiner_max_bpp = get_max_compressed_bpp_with_joiner(i915, mode_clock, |
| mode_hdisplay, bigjoiner); |
| bits_per_pixel = min(bits_per_pixel, joiner_max_bpp); |
| |
| bits_per_pixel = intel_dp_dsc_nearest_valid_bpp(i915, bits_per_pixel, pipe_bpp); |
| |
| return bits_per_pixel; |
| } |
| |
| u8 intel_dp_dsc_get_slice_count(const struct intel_connector *connector, |
| int mode_clock, int mode_hdisplay, |
| bool bigjoiner) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| u8 min_slice_count, i; |
| int max_slice_width; |
| |
| if (mode_clock <= DP_DSC_PEAK_PIXEL_RATE) |
| min_slice_count = DIV_ROUND_UP(mode_clock, |
| DP_DSC_MAX_ENC_THROUGHPUT_0); |
| else |
| min_slice_count = DIV_ROUND_UP(mode_clock, |
| DP_DSC_MAX_ENC_THROUGHPUT_1); |
| |
| /* |
| * Due to some DSC engine BW limitations, we need to enable second |
| * slice and VDSC engine, whenever we approach close enough to max CDCLK |
| */ |
| if (mode_clock >= ((i915->display.cdclk.max_cdclk_freq * 85) / 100)) |
| min_slice_count = max_t(u8, min_slice_count, 2); |
| |
| max_slice_width = drm_dp_dsc_sink_max_slice_width(connector->dp.dsc_dpcd); |
| if (max_slice_width < DP_DSC_MIN_SLICE_WIDTH_VALUE) { |
| drm_dbg_kms(&i915->drm, |
| "Unsupported slice width %d by DP DSC Sink device\n", |
| max_slice_width); |
| return 0; |
| } |
| /* Also take into account max slice width */ |
| min_slice_count = max_t(u8, min_slice_count, |
| DIV_ROUND_UP(mode_hdisplay, |
| max_slice_width)); |
| |
| /* Find the closest match to the valid slice count values */ |
| for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) { |
| u8 test_slice_count = valid_dsc_slicecount[i] << bigjoiner; |
| |
| if (test_slice_count > |
| drm_dp_dsc_sink_max_slice_count(connector->dp.dsc_dpcd, false)) |
| break; |
| |
| /* big joiner needs small joiner to be enabled */ |
| if (bigjoiner && test_slice_count < 4) |
| continue; |
| |
| if (min_slice_count <= test_slice_count) |
| return test_slice_count; |
| } |
| |
| drm_dbg_kms(&i915->drm, "Unsupported Slice Count %d\n", |
| min_slice_count); |
| return 0; |
| } |
| |
| static bool source_can_output(struct intel_dp *intel_dp, |
| enum intel_output_format format) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| switch (format) { |
| case INTEL_OUTPUT_FORMAT_RGB: |
| return true; |
| |
| case INTEL_OUTPUT_FORMAT_YCBCR444: |
| /* |
| * No YCbCr output support on gmch platforms. |
| * Also, ILK doesn't seem capable of DP YCbCr output. |
| * The displayed image is severly corrupted. SNB+ is fine. |
| */ |
| return !HAS_GMCH(i915) && !IS_IRONLAKE(i915); |
| |
| case INTEL_OUTPUT_FORMAT_YCBCR420: |
| /* Platform < Gen 11 cannot output YCbCr420 format */ |
| return DISPLAY_VER(i915) >= 11; |
| |
| default: |
| MISSING_CASE(format); |
| return false; |
| } |
| } |
| |
| static bool |
| dfp_can_convert_from_rgb(struct intel_dp *intel_dp, |
| enum intel_output_format sink_format) |
| { |
| if (!drm_dp_is_branch(intel_dp->dpcd)) |
| return false; |
| |
| if (sink_format == INTEL_OUTPUT_FORMAT_YCBCR444) |
| return intel_dp->dfp.rgb_to_ycbcr; |
| |
| if (sink_format == INTEL_OUTPUT_FORMAT_YCBCR420) |
| return intel_dp->dfp.rgb_to_ycbcr && |
| intel_dp->dfp.ycbcr_444_to_420; |
| |
| return false; |
| } |
| |
| static bool |
| dfp_can_convert_from_ycbcr444(struct intel_dp *intel_dp, |
| enum intel_output_format sink_format) |
| { |
| if (!drm_dp_is_branch(intel_dp->dpcd)) |
| return false; |
| |
| if (sink_format == INTEL_OUTPUT_FORMAT_YCBCR420) |
| return intel_dp->dfp.ycbcr_444_to_420; |
| |
| return false; |
| } |
| |
| static bool |
| dfp_can_convert(struct intel_dp *intel_dp, |
| enum intel_output_format output_format, |
| enum intel_output_format sink_format) |
| { |
| switch (output_format) { |
| case INTEL_OUTPUT_FORMAT_RGB: |
| return dfp_can_convert_from_rgb(intel_dp, sink_format); |
| case INTEL_OUTPUT_FORMAT_YCBCR444: |
| return dfp_can_convert_from_ycbcr444(intel_dp, sink_format); |
| default: |
| MISSING_CASE(output_format); |
| return false; |
| } |
| |
| return false; |
| } |
| |
| static enum intel_output_format |
| intel_dp_output_format(struct intel_connector *connector, |
| enum intel_output_format sink_format) |
| { |
| struct intel_dp *intel_dp = intel_attached_dp(connector); |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| enum intel_output_format force_dsc_output_format = |
| intel_dp->force_dsc_output_format; |
| enum intel_output_format output_format; |
| if (force_dsc_output_format) { |
| if (source_can_output(intel_dp, force_dsc_output_format) && |
| (!drm_dp_is_branch(intel_dp->dpcd) || |
| sink_format != force_dsc_output_format || |
| dfp_can_convert(intel_dp, force_dsc_output_format, sink_format))) |
| return force_dsc_output_format; |
| |
| drm_dbg_kms(&i915->drm, "Cannot force DSC output format\n"); |
| } |
| |
| if (sink_format == INTEL_OUTPUT_FORMAT_RGB || |
| dfp_can_convert_from_rgb(intel_dp, sink_format)) |
| output_format = INTEL_OUTPUT_FORMAT_RGB; |
| |
| else if (sink_format == INTEL_OUTPUT_FORMAT_YCBCR444 || |
| dfp_can_convert_from_ycbcr444(intel_dp, sink_format)) |
| output_format = INTEL_OUTPUT_FORMAT_YCBCR444; |
| |
| else |
| output_format = INTEL_OUTPUT_FORMAT_YCBCR420; |
| |
| drm_WARN_ON(&i915->drm, !source_can_output(intel_dp, output_format)); |
| |
| return output_format; |
| } |
| |
| int intel_dp_min_bpp(enum intel_output_format output_format) |
| { |
| if (output_format == INTEL_OUTPUT_FORMAT_RGB) |
| return 6 * 3; |
| else |
| return 8 * 3; |
| } |
| |
| int intel_dp_output_bpp(enum intel_output_format output_format, int bpp) |
| { |
| /* |
| * bpp value was assumed to RGB format. And YCbCr 4:2:0 output |
| * format of the number of bytes per pixel will be half the number |
| * of bytes of RGB pixel. |
| */ |
| if (output_format == INTEL_OUTPUT_FORMAT_YCBCR420) |
| bpp /= 2; |
| |
| return bpp; |
| } |
| |
| static enum intel_output_format |
| intel_dp_sink_format(struct intel_connector *connector, |
| const struct drm_display_mode *mode) |
| { |
| const struct drm_display_info *info = &connector->base.display_info; |
| |
| if (drm_mode_is_420_only(info, mode)) |
| return INTEL_OUTPUT_FORMAT_YCBCR420; |
| |
| return INTEL_OUTPUT_FORMAT_RGB; |
| } |
| |
| static int |
| intel_dp_mode_min_output_bpp(struct intel_connector *connector, |
| const struct drm_display_mode *mode) |
| { |
| enum intel_output_format output_format, sink_format; |
| |
| sink_format = intel_dp_sink_format(connector, mode); |
| |
| output_format = intel_dp_output_format(connector, sink_format); |
| |
| return intel_dp_output_bpp(output_format, intel_dp_min_bpp(output_format)); |
| } |
| |
| static bool intel_dp_hdisplay_bad(struct drm_i915_private *dev_priv, |
| int hdisplay) |
| { |
| /* |
| * Older platforms don't like hdisplay==4096 with DP. |
| * |
| * On ILK/SNB/IVB the pipe seems to be somewhat running (scanline |
| * and frame counter increment), but we don't get vblank interrupts, |
| * and the pipe underruns immediately. The link also doesn't seem |
| * to get trained properly. |
| * |
| * On CHV the vblank interrupts don't seem to disappear but |
| * otherwise the symptoms are similar. |
| * |
| * TODO: confirm the behaviour on HSW+ |
| */ |
| return hdisplay == 4096 && !HAS_DDI(dev_priv); |
| } |
| |
| static int intel_dp_max_tmds_clock(struct intel_dp *intel_dp) |
| { |
| struct intel_connector *connector = intel_dp->attached_connector; |
| const struct drm_display_info *info = &connector->base.display_info; |
| int max_tmds_clock = intel_dp->dfp.max_tmds_clock; |
| |
| /* Only consider the sink's max TMDS clock if we know this is a HDMI DFP */ |
| if (max_tmds_clock && info->max_tmds_clock) |
| max_tmds_clock = min(max_tmds_clock, info->max_tmds_clock); |
| |
| return max_tmds_clock; |
| } |
| |
| static enum drm_mode_status |
| intel_dp_tmds_clock_valid(struct intel_dp *intel_dp, |
| int clock, int bpc, |
| enum intel_output_format sink_format, |
| bool respect_downstream_limits) |
| { |
| int tmds_clock, min_tmds_clock, max_tmds_clock; |
| |
| if (!respect_downstream_limits) |
| return MODE_OK; |
| |
| tmds_clock = intel_hdmi_tmds_clock(clock, bpc, sink_format); |
| |
| min_tmds_clock = intel_dp->dfp.min_tmds_clock; |
| max_tmds_clock = intel_dp_max_tmds_clock(intel_dp); |
| |
| if (min_tmds_clock && tmds_clock < min_tmds_clock) |
| return MODE_CLOCK_LOW; |
| |
| if (max_tmds_clock && tmds_clock > max_tmds_clock) |
| return MODE_CLOCK_HIGH; |
| |
| return MODE_OK; |
| } |
| |
| static enum drm_mode_status |
| intel_dp_mode_valid_downstream(struct intel_connector *connector, |
| const struct drm_display_mode *mode, |
| int target_clock) |
| { |
| struct intel_dp *intel_dp = intel_attached_dp(connector); |
| const struct drm_display_info *info = &connector->base.display_info; |
| enum drm_mode_status status; |
| enum intel_output_format sink_format; |
| |
| /* If PCON supports FRL MODE, check FRL bandwidth constraints */ |
| if (intel_dp->dfp.pcon_max_frl_bw) { |
| int target_bw; |
| int max_frl_bw; |
| int bpp = intel_dp_mode_min_output_bpp(connector, mode); |
| |
| target_bw = bpp * target_clock; |
| |
| max_frl_bw = intel_dp->dfp.pcon_max_frl_bw; |
| |
| /* converting bw from Gbps to Kbps*/ |
| max_frl_bw = max_frl_bw * 1000000; |
| |
| if (target_bw > max_frl_bw) |
| return MODE_CLOCK_HIGH; |
| |
| return MODE_OK; |
| } |
| |
| if (intel_dp->dfp.max_dotclock && |
| target_clock > intel_dp->dfp.max_dotclock) |
| return MODE_CLOCK_HIGH; |
| |
| sink_format = intel_dp_sink_format(connector, mode); |
| |
| /* Assume 8bpc for the DP++/HDMI/DVI TMDS clock check */ |
| status = intel_dp_tmds_clock_valid(intel_dp, target_clock, |
| 8, sink_format, true); |
| |
| if (status != MODE_OK) { |
| if (sink_format == INTEL_OUTPUT_FORMAT_YCBCR420 || |
| !connector->base.ycbcr_420_allowed || |
| !drm_mode_is_420_also(info, mode)) |
| return status; |
| sink_format = INTEL_OUTPUT_FORMAT_YCBCR420; |
| status = intel_dp_tmds_clock_valid(intel_dp, target_clock, |
| 8, sink_format, true); |
| if (status != MODE_OK) |
| return status; |
| } |
| |
| return MODE_OK; |
| } |
| |
| bool intel_dp_need_joiner(struct intel_dp *intel_dp, |
| struct intel_connector *connector, |
| int hdisplay, int clock) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| if (!intel_dp_has_joiner(intel_dp)) |
| return false; |
| |
| return clock > i915->display.cdclk.max_dotclk_freq || hdisplay > 5120 || |
| connector->force_bigjoiner_enable; |
| } |
| |
| bool intel_dp_has_dsc(const struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| if (!HAS_DSC(i915)) |
| return false; |
| |
| if (connector->mst_port && !HAS_DSC_MST(i915)) |
| return false; |
| |
| if (connector->base.connector_type == DRM_MODE_CONNECTOR_eDP && |
| connector->panel.vbt.edp.dsc_disable) |
| return false; |
| |
| if (!drm_dp_sink_supports_dsc(connector->dp.dsc_dpcd)) |
| return false; |
| |
| return true; |
| } |
| |
| static enum drm_mode_status |
| intel_dp_mode_valid(struct drm_connector *_connector, |
| struct drm_display_mode *mode) |
| { |
| struct intel_connector *connector = to_intel_connector(_connector); |
| struct intel_dp *intel_dp = intel_attached_dp(connector); |
| struct drm_i915_private *dev_priv = to_i915(connector->base.dev); |
| const struct drm_display_mode *fixed_mode; |
| int target_clock = mode->clock; |
| int max_rate, mode_rate, max_lanes, max_link_clock; |
| int max_dotclk = dev_priv->display.cdclk.max_dotclk_freq; |
| u16 dsc_max_compressed_bpp = 0; |
| u8 dsc_slice_count = 0; |
| enum drm_mode_status status; |
| bool dsc = false, joiner = false; |
| |
| status = intel_cpu_transcoder_mode_valid(dev_priv, mode); |
| if (status != MODE_OK) |
| return status; |
| |
| if (mode->flags & DRM_MODE_FLAG_DBLCLK) |
| return MODE_H_ILLEGAL; |
| |
| if (mode->clock < 10000) |
| return MODE_CLOCK_LOW; |
| |
| fixed_mode = intel_panel_fixed_mode(connector, mode); |
| if (intel_dp_is_edp(intel_dp) && fixed_mode) { |
| status = intel_panel_mode_valid(connector, mode); |
| if (status != MODE_OK) |
| return status; |
| |
| target_clock = fixed_mode->clock; |
| } |
| |
| if (intel_dp_need_joiner(intel_dp, connector, |
| mode->hdisplay, target_clock)) { |
| joiner = true; |
| max_dotclk *= 2; |
| } |
| if (target_clock > max_dotclk) |
| return MODE_CLOCK_HIGH; |
| |
| if (intel_dp_hdisplay_bad(dev_priv, mode->hdisplay)) |
| return MODE_H_ILLEGAL; |
| |
| max_link_clock = intel_dp_max_link_rate(intel_dp); |
| max_lanes = intel_dp_max_lane_count(intel_dp); |
| |
| max_rate = intel_dp_max_link_data_rate(intel_dp, max_link_clock, max_lanes); |
| |
| mode_rate = intel_dp_link_required(target_clock, |
| intel_dp_mode_min_output_bpp(connector, mode)); |
| |
| if (intel_dp_has_dsc(connector)) { |
| enum intel_output_format sink_format, output_format; |
| int pipe_bpp; |
| |
| sink_format = intel_dp_sink_format(connector, mode); |
| output_format = intel_dp_output_format(connector, sink_format); |
| /* |
| * TBD pass the connector BPC, |
| * for now U8_MAX so that max BPC on that platform would be picked |
| */ |
| pipe_bpp = intel_dp_dsc_compute_max_bpp(connector, U8_MAX); |
| |
| /* |
| * Output bpp is stored in 6.4 format so right shift by 4 to get the |
| * integer value since we support only integer values of bpp. |
| */ |
| if (intel_dp_is_edp(intel_dp)) { |
| dsc_max_compressed_bpp = |
| drm_edp_dsc_sink_output_bpp(connector->dp.dsc_dpcd) >> 4; |
| dsc_slice_count = |
| drm_dp_dsc_sink_max_slice_count(connector->dp.dsc_dpcd, |
| true); |
| } else if (drm_dp_sink_supports_fec(connector->dp.fec_capability)) { |
| dsc_max_compressed_bpp = |
| intel_dp_dsc_get_max_compressed_bpp(dev_priv, |
| max_link_clock, |
| max_lanes, |
| target_clock, |
| mode->hdisplay, |
| joiner, |
| output_format, |
| pipe_bpp, 64); |
| dsc_slice_count = |
| intel_dp_dsc_get_slice_count(connector, |
| target_clock, |
| mode->hdisplay, |
| joiner); |
| } |
| |
| dsc = dsc_max_compressed_bpp && dsc_slice_count; |
| } |
| |
| if (intel_dp_joiner_needs_dsc(dev_priv, joiner) && !dsc) |
| return MODE_CLOCK_HIGH; |
| |
| if (mode_rate > max_rate && !dsc) |
| return MODE_CLOCK_HIGH; |
| |
| status = intel_dp_mode_valid_downstream(connector, mode, target_clock); |
| if (status != MODE_OK) |
| return status; |
| |
| return intel_mode_valid_max_plane_size(dev_priv, mode, joiner); |
| } |
| |
| bool intel_dp_source_supports_tps3(struct drm_i915_private *i915) |
| { |
| return DISPLAY_VER(i915) >= 9 || IS_BROADWELL(i915) || IS_HASWELL(i915); |
| } |
| |
| bool intel_dp_source_supports_tps4(struct drm_i915_private *i915) |
| { |
| return DISPLAY_VER(i915) >= 10; |
| } |
| |
| static void snprintf_int_array(char *str, size_t len, |
| const int *array, int nelem) |
| { |
| int i; |
| |
| str[0] = '\0'; |
| |
| for (i = 0; i < nelem; i++) { |
| int r = snprintf(str, len, "%s%d", i ? ", " : "", array[i]); |
| if (r >= len) |
| return; |
| str += r; |
| len -= r; |
| } |
| } |
| |
| static void intel_dp_print_rates(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| char str[128]; /* FIXME: too big for stack? */ |
| |
| if (!drm_debug_enabled(DRM_UT_KMS)) |
| return; |
| |
| snprintf_int_array(str, sizeof(str), |
| intel_dp->source_rates, intel_dp->num_source_rates); |
| drm_dbg_kms(&i915->drm, "source rates: %s\n", str); |
| |
| snprintf_int_array(str, sizeof(str), |
| intel_dp->sink_rates, intel_dp->num_sink_rates); |
| drm_dbg_kms(&i915->drm, "sink rates: %s\n", str); |
| |
| snprintf_int_array(str, sizeof(str), |
| intel_dp->common_rates, intel_dp->num_common_rates); |
| drm_dbg_kms(&i915->drm, "common rates: %s\n", str); |
| } |
| |
| static int forced_link_rate(struct intel_dp *intel_dp) |
| { |
| int len = intel_dp_common_len_rate_limit(intel_dp, intel_dp->link.force_rate); |
| |
| if (len == 0) |
| return intel_dp_common_rate(intel_dp, 0); |
| |
| return intel_dp_common_rate(intel_dp, len - 1); |
| } |
| |
| int |
| intel_dp_max_link_rate(struct intel_dp *intel_dp) |
| { |
| int len; |
| |
| if (intel_dp->link.force_rate) |
| return forced_link_rate(intel_dp); |
| |
| len = intel_dp_common_len_rate_limit(intel_dp, intel_dp->link.max_rate); |
| |
| return intel_dp_common_rate(intel_dp, len - 1); |
| } |
| |
| static int |
| intel_dp_min_link_rate(struct intel_dp *intel_dp) |
| { |
| if (intel_dp->link.force_rate) |
| return forced_link_rate(intel_dp); |
| |
| return intel_dp_common_rate(intel_dp, 0); |
| } |
| |
| int intel_dp_rate_select(struct intel_dp *intel_dp, int rate) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| int i = intel_dp_rate_index(intel_dp->sink_rates, |
| intel_dp->num_sink_rates, rate); |
| |
| if (drm_WARN_ON(&i915->drm, i < 0)) |
| i = 0; |
| |
| return i; |
| } |
| |
| void intel_dp_compute_rate(struct intel_dp *intel_dp, int port_clock, |
| u8 *link_bw, u8 *rate_select) |
| { |
| /* eDP 1.4 rate select method. */ |
| if (intel_dp->use_rate_select) { |
| *link_bw = 0; |
| *rate_select = |
| intel_dp_rate_select(intel_dp, port_clock); |
| } else { |
| *link_bw = drm_dp_link_rate_to_bw_code(port_clock); |
| *rate_select = 0; |
| } |
| } |
| |
| bool intel_dp_has_hdmi_sink(struct intel_dp *intel_dp) |
| { |
| struct intel_connector *connector = intel_dp->attached_connector; |
| |
| return connector->base.display_info.is_hdmi; |
| } |
| |
| static bool intel_dp_source_supports_fec(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *pipe_config) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| |
| if (DISPLAY_VER(dev_priv) >= 12) |
| return true; |
| |
| if (DISPLAY_VER(dev_priv) == 11 && encoder->port != PORT_A && |
| !intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DP_MST)) |
| return true; |
| |
| return false; |
| } |
| |
| bool intel_dp_supports_fec(struct intel_dp *intel_dp, |
| const struct intel_connector *connector, |
| const struct intel_crtc_state *pipe_config) |
| { |
| return intel_dp_source_supports_fec(intel_dp, pipe_config) && |
| drm_dp_sink_supports_fec(connector->dp.fec_capability); |
| } |
| |
| bool intel_dp_supports_dsc(const struct intel_connector *connector, |
| const struct intel_crtc_state *crtc_state) |
| { |
| if (!intel_dp_has_dsc(connector)) |
| return false; |
| |
| if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP) && !crtc_state->fec_enable) |
| return false; |
| |
| return intel_dsc_source_support(crtc_state); |
| } |
| |
| static int intel_dp_hdmi_compute_bpc(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| int bpc, bool respect_downstream_limits) |
| { |
| int clock = crtc_state->hw.adjusted_mode.crtc_clock; |
| |
| /* |
| * Current bpc could already be below 8bpc due to |
| * FDI bandwidth constraints or other limits. |
| * HDMI minimum is 8bpc however. |
| */ |
| bpc = max(bpc, 8); |
| |
| /* |
| * We will never exceed downstream TMDS clock limits while |
| * attempting deep color. If the user insists on forcing an |
| * out of spec mode they will have to be satisfied with 8bpc. |
| */ |
| if (!respect_downstream_limits) |
| bpc = 8; |
| |
| for (; bpc >= 8; bpc -= 2) { |
| if (intel_hdmi_bpc_possible(crtc_state, bpc, |
| intel_dp_has_hdmi_sink(intel_dp)) && |
| intel_dp_tmds_clock_valid(intel_dp, clock, bpc, crtc_state->sink_format, |
| respect_downstream_limits) == MODE_OK) |
| return bpc; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int intel_dp_max_bpp(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| bool respect_downstream_limits) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| struct intel_connector *intel_connector = intel_dp->attached_connector; |
| int bpp, bpc; |
| |
| bpc = crtc_state->pipe_bpp / 3; |
| |
| if (intel_dp->dfp.max_bpc) |
| bpc = min_t(int, bpc, intel_dp->dfp.max_bpc); |
| |
| if (intel_dp->dfp.min_tmds_clock) { |
| int max_hdmi_bpc; |
| |
| max_hdmi_bpc = intel_dp_hdmi_compute_bpc(intel_dp, crtc_state, bpc, |
| respect_downstream_limits); |
| if (max_hdmi_bpc < 0) |
| return 0; |
| |
| bpc = min(bpc, max_hdmi_bpc); |
| } |
| |
| bpp = bpc * 3; |
| if (intel_dp_is_edp(intel_dp)) { |
| /* Get bpp from vbt only for panels that dont have bpp in edid */ |
| if (intel_connector->base.display_info.bpc == 0 && |
| intel_connector->panel.vbt.edp.bpp && |
| intel_connector->panel.vbt.edp.bpp < bpp) { |
| drm_dbg_kms(&dev_priv->drm, |
| "clamping bpp for eDP panel to BIOS-provided %i\n", |
| intel_connector->panel.vbt.edp.bpp); |
| bpp = intel_connector->panel.vbt.edp.bpp; |
| } |
| } |
| |
| return bpp; |
| } |
| |
| /* Adjust link config limits based on compliance test requests. */ |
| void |
| intel_dp_adjust_compliance_config(struct intel_dp *intel_dp, |
| struct intel_crtc_state *pipe_config, |
| struct link_config_limits *limits) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| /* For DP Compliance we override the computed bpp for the pipe */ |
| if (intel_dp->compliance.test_data.bpc != 0) { |
| int bpp = 3 * intel_dp->compliance.test_data.bpc; |
| |
| limits->pipe.min_bpp = limits->pipe.max_bpp = bpp; |
| pipe_config->dither_force_disable = bpp == 6 * 3; |
| |
| drm_dbg_kms(&i915->drm, "Setting pipe_bpp to %d\n", bpp); |
| } |
| |
| /* Use values requested by Compliance Test Request */ |
| if (intel_dp->compliance.test_type == DP_TEST_LINK_TRAINING) { |
| int index; |
| |
| /* Validate the compliance test data since max values |
| * might have changed due to link train fallback. |
| */ |
| if (intel_dp_link_params_valid(intel_dp, intel_dp->compliance.test_link_rate, |
| intel_dp->compliance.test_lane_count)) { |
| index = intel_dp_rate_index(intel_dp->common_rates, |
| intel_dp->num_common_rates, |
| intel_dp->compliance.test_link_rate); |
| if (index >= 0) |
| limits->min_rate = limits->max_rate = |
| intel_dp->compliance.test_link_rate; |
| limits->min_lane_count = limits->max_lane_count = |
| intel_dp->compliance.test_lane_count; |
| } |
| } |
| } |
| |
| static bool has_seamless_m_n(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| /* |
| * Seamless M/N reprogramming only implemented |
| * for BDW+ double buffered M/N registers so far. |
| */ |
| return HAS_DOUBLE_BUFFERED_M_N(i915) && |
| intel_panel_drrs_type(connector) == DRRS_TYPE_SEAMLESS; |
| } |
| |
| static int intel_dp_mode_clock(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_connector *connector = to_intel_connector(conn_state->connector); |
| const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; |
| |
| /* FIXME a bit of a mess wrt clock vs. crtc_clock */ |
| if (has_seamless_m_n(connector)) |
| return intel_panel_highest_mode(connector, adjusted_mode)->clock; |
| else |
| return adjusted_mode->crtc_clock; |
| } |
| |
| /* Optimize link config in order: max bpp, min clock, min lanes */ |
| static int |
| intel_dp_compute_link_config_wide(struct intel_dp *intel_dp, |
| struct intel_crtc_state *pipe_config, |
| const struct drm_connector_state *conn_state, |
| const struct link_config_limits *limits) |
| { |
| int bpp, i, lane_count, clock = intel_dp_mode_clock(pipe_config, conn_state); |
| int mode_rate, link_rate, link_avail; |
| |
| for (bpp = fxp_q4_to_int(limits->link.max_bpp_x16); |
| bpp >= fxp_q4_to_int(limits->link.min_bpp_x16); |
| bpp -= 2 * 3) { |
| int link_bpp = intel_dp_output_bpp(pipe_config->output_format, bpp); |
| |
| mode_rate = intel_dp_link_required(clock, link_bpp); |
| |
| for (i = 0; i < intel_dp->num_common_rates; i++) { |
| link_rate = intel_dp_common_rate(intel_dp, i); |
| if (link_rate < limits->min_rate || |
| link_rate > limits->max_rate) |
| continue; |
| |
| for (lane_count = limits->min_lane_count; |
| lane_count <= limits->max_lane_count; |
| lane_count <<= 1) { |
| link_avail = intel_dp_max_link_data_rate(intel_dp, |
| link_rate, |
| lane_count); |
| |
| |
| if (mode_rate <= link_avail) { |
| pipe_config->lane_count = lane_count; |
| pipe_config->pipe_bpp = bpp; |
| pipe_config->port_clock = link_rate; |
| |
| return 0; |
| } |
| } |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static |
| u8 intel_dp_dsc_max_src_input_bpc(struct drm_i915_private *i915) |
| { |
| /* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */ |
| if (DISPLAY_VER(i915) >= 12) |
| return 12; |
| if (DISPLAY_VER(i915) == 11) |
| return 10; |
| |
| return 0; |
| } |
| |
| int intel_dp_dsc_compute_max_bpp(const struct intel_connector *connector, |
| u8 max_req_bpc) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| int i, num_bpc; |
| u8 dsc_bpc[3] = {}; |
| u8 dsc_max_bpc; |
| |
| dsc_max_bpc = intel_dp_dsc_max_src_input_bpc(i915); |
| |
| if (!dsc_max_bpc) |
| return dsc_max_bpc; |
| |
| dsc_max_bpc = min_t(u8, dsc_max_bpc, max_req_bpc); |
| |
| num_bpc = drm_dp_dsc_sink_supported_input_bpcs(connector->dp.dsc_dpcd, |
| dsc_bpc); |
| for (i = 0; i < num_bpc; i++) { |
| if (dsc_max_bpc >= dsc_bpc[i]) |
| return dsc_bpc[i] * 3; |
| } |
| |
| return 0; |
| } |
| |
| static int intel_dp_source_dsc_version_minor(struct drm_i915_private *i915) |
| { |
| return DISPLAY_VER(i915) >= 14 ? 2 : 1; |
| } |
| |
| static int intel_dp_sink_dsc_version_minor(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) |
| { |
| return (dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] & DP_DSC_MINOR_MASK) >> |
| DP_DSC_MINOR_SHIFT; |
| } |
| |
| static int intel_dp_get_slice_height(int vactive) |
| { |
| int slice_height; |
| |
| /* |
| * VDSC 1.2a spec in Section 3.8 Options for Slices implies that 108 |
| * lines is an optimal slice height, but any size can be used as long as |
| * vertical active integer multiple and maximum vertical slice count |
| * requirements are met. |
| */ |
| for (slice_height = 108; slice_height <= vactive; slice_height += 2) |
| if (vactive % slice_height == 0) |
| return slice_height; |
| |
| /* |
| * Highly unlikely we reach here as most of the resolutions will end up |
| * finding appropriate slice_height in above loop but returning |
| * slice_height as 2 here as it should work with all resolutions. |
| */ |
| return 2; |
| } |
| |
| static int intel_dp_dsc_compute_params(const struct intel_connector *connector, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config; |
| int ret; |
| |
| /* |
| * RC_MODEL_SIZE is currently a constant across all configurations. |
| * |
| * FIXME: Look into using sink defined DPCD DP_DSC_RC_BUF_BLK_SIZE and |
| * DP_DSC_RC_BUF_SIZE for this. |
| */ |
| vdsc_cfg->rc_model_size = DSC_RC_MODEL_SIZE_CONST; |
| vdsc_cfg->pic_height = crtc_state->hw.adjusted_mode.crtc_vdisplay; |
| |
| vdsc_cfg->slice_height = intel_dp_get_slice_height(vdsc_cfg->pic_height); |
| |
| ret = intel_dsc_compute_params(crtc_state); |
| if (ret) |
| return ret; |
| |
| vdsc_cfg->dsc_version_major = |
| (connector->dp.dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] & |
| DP_DSC_MAJOR_MASK) >> DP_DSC_MAJOR_SHIFT; |
| vdsc_cfg->dsc_version_minor = |
| min(intel_dp_source_dsc_version_minor(i915), |
| intel_dp_sink_dsc_version_minor(connector->dp.dsc_dpcd)); |
| if (vdsc_cfg->convert_rgb) |
| vdsc_cfg->convert_rgb = |
| connector->dp.dsc_dpcd[DP_DSC_DEC_COLOR_FORMAT_CAP - DP_DSC_SUPPORT] & |
| DP_DSC_RGB; |
| |
| vdsc_cfg->line_buf_depth = min(INTEL_DP_DSC_MAX_LINE_BUF_DEPTH, |
| drm_dp_dsc_sink_line_buf_depth(connector->dp.dsc_dpcd)); |
| if (!vdsc_cfg->line_buf_depth) { |
| drm_dbg_kms(&i915->drm, |
| "DSC Sink Line Buffer Depth invalid\n"); |
| return -EINVAL; |
| } |
| |
| vdsc_cfg->block_pred_enable = |
| connector->dp.dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] & |
| DP_DSC_BLK_PREDICTION_IS_SUPPORTED; |
| |
| return drm_dsc_compute_rc_parameters(vdsc_cfg); |
| } |
| |
| static bool intel_dp_dsc_supports_format(const struct intel_connector *connector, |
| enum intel_output_format output_format) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| u8 sink_dsc_format; |
| |
| switch (output_format) { |
| case INTEL_OUTPUT_FORMAT_RGB: |
| sink_dsc_format = DP_DSC_RGB; |
| break; |
| case INTEL_OUTPUT_FORMAT_YCBCR444: |
| sink_dsc_format = DP_DSC_YCbCr444; |
| break; |
| case INTEL_OUTPUT_FORMAT_YCBCR420: |
| if (min(intel_dp_source_dsc_version_minor(i915), |
| intel_dp_sink_dsc_version_minor(connector->dp.dsc_dpcd)) < 2) |
| return false; |
| sink_dsc_format = DP_DSC_YCbCr420_Native; |
| break; |
| default: |
| return false; |
| } |
| |
| return drm_dp_dsc_sink_supports_format(connector->dp.dsc_dpcd, sink_dsc_format); |
| } |
| |
| static bool is_bw_sufficient_for_dsc_config(u16 compressed_bppx16, u32 link_clock, |
| u32 lane_count, u32 mode_clock, |
| enum intel_output_format output_format, |
| int timeslots) |
| { |
| u32 available_bw, required_bw; |
| |
| available_bw = (link_clock * lane_count * timeslots * 16) / 8; |
| required_bw = compressed_bppx16 * (intel_dp_mode_to_fec_clock(mode_clock)); |
| |
| return available_bw > required_bw; |
| } |
| |
| static int dsc_compute_link_config(struct intel_dp *intel_dp, |
| struct intel_crtc_state *pipe_config, |
| struct link_config_limits *limits, |
| u16 compressed_bppx16, |
| int timeslots) |
| { |
| const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode; |
| int link_rate, lane_count; |
| int i; |
| |
| for (i = 0; i < intel_dp->num_common_rates; i++) { |
| link_rate = intel_dp_common_rate(intel_dp, i); |
| if (link_rate < limits->min_rate || link_rate > limits->max_rate) |
| continue; |
| |
| for (lane_count = limits->min_lane_count; |
| lane_count <= limits->max_lane_count; |
| lane_count <<= 1) { |
| if (!is_bw_sufficient_for_dsc_config(compressed_bppx16, link_rate, |
| lane_count, adjusted_mode->clock, |
| pipe_config->output_format, |
| timeslots)) |
| continue; |
| |
| pipe_config->lane_count = lane_count; |
| pipe_config->port_clock = link_rate; |
| |
| return 0; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static |
| u16 intel_dp_dsc_max_sink_compressed_bppx16(const struct intel_connector *connector, |
| struct intel_crtc_state *pipe_config, |
| int bpc) |
| { |
| u16 max_bppx16 = drm_edp_dsc_sink_output_bpp(connector->dp.dsc_dpcd); |
| |
| if (max_bppx16) |
| return max_bppx16; |
| /* |
| * If support not given in DPCD 67h, 68h use the Maximum Allowed bit rate |
| * values as given in spec Table 2-157 DP v2.0 |
| */ |
| switch (pipe_config->output_format) { |
| case INTEL_OUTPUT_FORMAT_RGB: |
| case INTEL_OUTPUT_FORMAT_YCBCR444: |
| return (3 * bpc) << 4; |
| case INTEL_OUTPUT_FORMAT_YCBCR420: |
| return (3 * (bpc / 2)) << 4; |
| default: |
| MISSING_CASE(pipe_config->output_format); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int intel_dp_dsc_sink_min_compressed_bpp(struct intel_crtc_state *pipe_config) |
| { |
| /* From Mandatory bit rate range Support Table 2-157 (DP v2.0) */ |
| switch (pipe_config->output_format) { |
| case INTEL_OUTPUT_FORMAT_RGB: |
| case INTEL_OUTPUT_FORMAT_YCBCR444: |
| return 8; |
| case INTEL_OUTPUT_FORMAT_YCBCR420: |
| return 6; |
| default: |
| MISSING_CASE(pipe_config->output_format); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| int intel_dp_dsc_sink_max_compressed_bpp(const struct intel_connector *connector, |
| struct intel_crtc_state *pipe_config, |
| int bpc) |
| { |
| return intel_dp_dsc_max_sink_compressed_bppx16(connector, |
| pipe_config, bpc) >> 4; |
| } |
| |
| static int dsc_src_min_compressed_bpp(void) |
| { |
| /* Min Compressed bpp supported by source is 8 */ |
| return 8; |
| } |
| |
| static int dsc_src_max_compressed_bpp(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| /* |
| * Max Compressed bpp for Gen 13+ is 27bpp. |
| * For earlier platform is 23bpp. (Bspec:49259). |
| */ |
| if (DISPLAY_VER(i915) < 13) |
| return 23; |
| else |
| return 27; |
| } |
| |
| /* |
| * From a list of valid compressed bpps try different compressed bpp and find a |
| * suitable link configuration that can support it. |
| */ |
| static int |
| icl_dsc_compute_link_config(struct intel_dp *intel_dp, |
| struct intel_crtc_state *pipe_config, |
| struct link_config_limits *limits, |
| int dsc_max_bpp, |
| int dsc_min_bpp, |
| int pipe_bpp, |
| int timeslots) |
| { |
| int i, ret; |
| |
| /* Compressed BPP should be less than the Input DSC bpp */ |
| dsc_max_bpp = min(dsc_max_bpp, pipe_bpp - 1); |
| |
| for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp); i++) { |
| if (valid_dsc_bpp[i] < dsc_min_bpp) |
| continue; |
| if (valid_dsc_bpp[i] > dsc_max_bpp) |
| break; |
| |
| ret = dsc_compute_link_config(intel_dp, |
| pipe_config, |
| limits, |
| valid_dsc_bpp[i] << 4, |
| timeslots); |
| if (ret == 0) { |
| pipe_config->dsc.compressed_bpp_x16 = |
| fxp_q4_from_int(valid_dsc_bpp[i]); |
| return 0; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| /* |
| * From XE_LPD onwards we supports compression bpps in steps of 1 up to |
| * uncompressed bpp-1. So we start from max compressed bpp and see if any |
| * link configuration is able to support that compressed bpp, if not we |
| * step down and check for lower compressed bpp. |
| */ |
| static int |
| xelpd_dsc_compute_link_config(struct intel_dp *intel_dp, |
| const struct intel_connector *connector, |
| struct intel_crtc_state *pipe_config, |
| struct link_config_limits *limits, |
| int dsc_max_bpp, |
| int dsc_min_bpp, |
| int pipe_bpp, |
| int timeslots) |
| { |
| u8 bppx16_incr = drm_dp_dsc_sink_bpp_incr(connector->dp.dsc_dpcd); |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| u16 compressed_bppx16; |
| u8 bppx16_step; |
| int ret; |
| |
| if (DISPLAY_VER(i915) < 14 || bppx16_incr <= 1) |
| bppx16_step = 16; |
| else |
| bppx16_step = 16 / bppx16_incr; |
| |
| /* Compressed BPP should be less than the Input DSC bpp */ |
| dsc_max_bpp = min(dsc_max_bpp << 4, (pipe_bpp << 4) - bppx16_step); |
| dsc_min_bpp = dsc_min_bpp << 4; |
| |
| for (compressed_bppx16 = dsc_max_bpp; |
| compressed_bppx16 >= dsc_min_bpp; |
| compressed_bppx16 -= bppx16_step) { |
| if (intel_dp->force_dsc_fractional_bpp_en && |
| !fxp_q4_to_frac(compressed_bppx16)) |
| continue; |
| ret = dsc_compute_link_config(intel_dp, |
| pipe_config, |
| limits, |
| compressed_bppx16, |
| timeslots); |
| if (ret == 0) { |
| pipe_config->dsc.compressed_bpp_x16 = compressed_bppx16; |
| if (intel_dp->force_dsc_fractional_bpp_en && |
| fxp_q4_to_frac(compressed_bppx16)) |
| drm_dbg_kms(&i915->drm, "Forcing DSC fractional bpp\n"); |
| |
| return 0; |
| } |
| } |
| return -EINVAL; |
| } |
| |
| static int dsc_compute_compressed_bpp(struct intel_dp *intel_dp, |
| const struct intel_connector *connector, |
| struct intel_crtc_state *pipe_config, |
| struct link_config_limits *limits, |
| int pipe_bpp, |
| int timeslots) |
| { |
| const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode; |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| int dsc_src_min_bpp, dsc_sink_min_bpp, dsc_min_bpp; |
| int dsc_src_max_bpp, dsc_sink_max_bpp, dsc_max_bpp; |
| int dsc_joiner_max_bpp; |
| |
| dsc_src_min_bpp = dsc_src_min_compressed_bpp(); |
| dsc_sink_min_bpp = intel_dp_dsc_sink_min_compressed_bpp(pipe_config); |
| dsc_min_bpp = max(dsc_src_min_bpp, dsc_sink_min_bpp); |
| dsc_min_bpp = max(dsc_min_bpp, fxp_q4_to_int_roundup(limits->link.min_bpp_x16)); |
| |
| dsc_src_max_bpp = dsc_src_max_compressed_bpp(intel_dp); |
| dsc_sink_max_bpp = intel_dp_dsc_sink_max_compressed_bpp(connector, |
| pipe_config, |
| pipe_bpp / 3); |
| dsc_max_bpp = dsc_sink_max_bpp ? min(dsc_sink_max_bpp, dsc_src_max_bpp) : dsc_src_max_bpp; |
| |
| dsc_joiner_max_bpp = get_max_compressed_bpp_with_joiner(i915, adjusted_mode->clock, |
| adjusted_mode->hdisplay, |
| pipe_config->joiner_pipes); |
| dsc_max_bpp = min(dsc_max_bpp, dsc_joiner_max_bpp); |
| dsc_max_bpp = min(dsc_max_bpp, fxp_q4_to_int(limits->link.max_bpp_x16)); |
| |
| if (DISPLAY_VER(i915) >= 13) |
| return xelpd_dsc_compute_link_config(intel_dp, connector, pipe_config, limits, |
| dsc_max_bpp, dsc_min_bpp, pipe_bpp, timeslots); |
| return icl_dsc_compute_link_config(intel_dp, pipe_config, limits, |
| dsc_max_bpp, dsc_min_bpp, pipe_bpp, timeslots); |
| } |
| |
| static |
| u8 intel_dp_dsc_min_src_input_bpc(struct drm_i915_private *i915) |
| { |
| /* Min DSC Input BPC for ICL+ is 8 */ |
| return HAS_DSC(i915) ? 8 : 0; |
| } |
| |
| static |
| bool is_dsc_pipe_bpp_sufficient(struct drm_i915_private *i915, |
| struct drm_connector_state *conn_state, |
| struct link_config_limits *limits, |
| int pipe_bpp) |
| { |
| u8 dsc_max_bpc, dsc_min_bpc, dsc_max_pipe_bpp, dsc_min_pipe_bpp; |
| |
| dsc_max_bpc = min(intel_dp_dsc_max_src_input_bpc(i915), conn_state->max_requested_bpc); |
| dsc_min_bpc = intel_dp_dsc_min_src_input_bpc(i915); |
| |
| dsc_max_pipe_bpp = min(dsc_max_bpc * 3, limits->pipe.max_bpp); |
| dsc_min_pipe_bpp = max(dsc_min_bpc * 3, limits->pipe.min_bpp); |
| |
| return pipe_bpp >= dsc_min_pipe_bpp && |
| pipe_bpp <= dsc_max_pipe_bpp; |
| } |
| |
| static |
| int intel_dp_force_dsc_pipe_bpp(struct intel_dp *intel_dp, |
| struct drm_connector_state *conn_state, |
| struct link_config_limits *limits) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| int forced_bpp; |
| |
| if (!intel_dp->force_dsc_bpc) |
| return 0; |
| |
| forced_bpp = intel_dp->force_dsc_bpc * 3; |
| |
| if (is_dsc_pipe_bpp_sufficient(i915, conn_state, limits, forced_bpp)) { |
| drm_dbg_kms(&i915->drm, "Input DSC BPC forced to %d\n", intel_dp->force_dsc_bpc); |
| return forced_bpp; |
| } |
| |
| drm_dbg_kms(&i915->drm, "Cannot force DSC BPC:%d, due to DSC BPC limits\n", |
| intel_dp->force_dsc_bpc); |
| |
| return 0; |
| } |
| |
| static int intel_dp_dsc_compute_pipe_bpp(struct intel_dp *intel_dp, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state, |
| struct link_config_limits *limits, |
| int timeslots) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| const struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| u8 max_req_bpc = conn_state->max_requested_bpc; |
| u8 dsc_max_bpc, dsc_max_bpp; |
| u8 dsc_min_bpc, dsc_min_bpp; |
| u8 dsc_bpc[3] = {}; |
| int forced_bpp, pipe_bpp; |
| int num_bpc, i, ret; |
| |
| forced_bpp = intel_dp_force_dsc_pipe_bpp(intel_dp, conn_state, limits); |
| |
| if (forced_bpp) { |
| ret = dsc_compute_compressed_bpp(intel_dp, connector, pipe_config, |
| limits, forced_bpp, timeslots); |
| if (ret == 0) { |
| pipe_config->pipe_bpp = forced_bpp; |
| return 0; |
| } |
| } |
| |
| dsc_max_bpc = intel_dp_dsc_max_src_input_bpc(i915); |
| if (!dsc_max_bpc) |
| return -EINVAL; |
| |
| dsc_max_bpc = min_t(u8, dsc_max_bpc, max_req_bpc); |
| dsc_max_bpp = min(dsc_max_bpc * 3, limits->pipe.max_bpp); |
| |
| dsc_min_bpc = intel_dp_dsc_min_src_input_bpc(i915); |
| dsc_min_bpp = max(dsc_min_bpc * 3, limits->pipe.min_bpp); |
| |
| /* |
| * Get the maximum DSC bpc that will be supported by any valid |
| * link configuration and compressed bpp. |
| */ |
| num_bpc = drm_dp_dsc_sink_supported_input_bpcs(connector->dp.dsc_dpcd, dsc_bpc); |
| for (i = 0; i < num_bpc; i++) { |
| pipe_bpp = dsc_bpc[i] * 3; |
| if (pipe_bpp < dsc_min_bpp) |
| break; |
| if (pipe_bpp > dsc_max_bpp) |
| continue; |
| ret = dsc_compute_compressed_bpp(intel_dp, connector, pipe_config, |
| limits, pipe_bpp, timeslots); |
| if (ret == 0) { |
| pipe_config->pipe_bpp = pipe_bpp; |
| return 0; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int intel_edp_dsc_compute_pipe_bpp(struct intel_dp *intel_dp, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state, |
| struct link_config_limits *limits) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| int pipe_bpp, forced_bpp; |
| int dsc_src_min_bpp, dsc_sink_min_bpp, dsc_min_bpp; |
| int dsc_src_max_bpp, dsc_sink_max_bpp, dsc_max_bpp; |
| |
| forced_bpp = intel_dp_force_dsc_pipe_bpp(intel_dp, conn_state, limits); |
| |
| if (forced_bpp) { |
| pipe_bpp = forced_bpp; |
| } else { |
| int max_bpc = min(limits->pipe.max_bpp / 3, (int)conn_state->max_requested_bpc); |
| |
| /* For eDP use max bpp that can be supported with DSC. */ |
| pipe_bpp = intel_dp_dsc_compute_max_bpp(connector, max_bpc); |
| if (!is_dsc_pipe_bpp_sufficient(i915, conn_state, limits, pipe_bpp)) { |
| drm_dbg_kms(&i915->drm, |
| "Computed BPC is not in DSC BPC limits\n"); |
| return -EINVAL; |
| } |
| } |
| pipe_config->port_clock = limits->max_rate; |
| pipe_config->lane_count = limits->max_lane_count; |
| |
| dsc_src_min_bpp = dsc_src_min_compressed_bpp(); |
| dsc_sink_min_bpp = intel_dp_dsc_sink_min_compressed_bpp(pipe_config); |
| dsc_min_bpp = max(dsc_src_min_bpp, dsc_sink_min_bpp); |
| dsc_min_bpp = max(dsc_min_bpp, fxp_q4_to_int_roundup(limits->link.min_bpp_x16)); |
| |
| dsc_src_max_bpp = dsc_src_max_compressed_bpp(intel_dp); |
| dsc_sink_max_bpp = intel_dp_dsc_sink_max_compressed_bpp(connector, |
| pipe_config, |
| pipe_bpp / 3); |
| dsc_max_bpp = dsc_sink_max_bpp ? min(dsc_sink_max_bpp, dsc_src_max_bpp) : dsc_src_max_bpp; |
| dsc_max_bpp = min(dsc_max_bpp, fxp_q4_to_int(limits->link.max_bpp_x16)); |
| |
| /* Compressed BPP should be less than the Input DSC bpp */ |
| dsc_max_bpp = min(dsc_max_bpp, pipe_bpp - 1); |
| |
| pipe_config->dsc.compressed_bpp_x16 = |
| fxp_q4_from_int(max(dsc_min_bpp, dsc_max_bpp)); |
| |
| pipe_config->pipe_bpp = pipe_bpp; |
| |
| return 0; |
| } |
| |
| int intel_dp_dsc_compute_config(struct intel_dp *intel_dp, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state, |
| struct link_config_limits *limits, |
| int timeslots, |
| bool compute_pipe_bpp) |
| { |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev); |
| const struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| const struct drm_display_mode *adjusted_mode = |
| &pipe_config->hw.adjusted_mode; |
| int ret; |
| |
| pipe_config->fec_enable = pipe_config->fec_enable || |
| (!intel_dp_is_edp(intel_dp) && |
| intel_dp_supports_fec(intel_dp, connector, pipe_config)); |
| |
| if (!intel_dp_supports_dsc(connector, pipe_config)) |
| return -EINVAL; |
| |
| if (!intel_dp_dsc_supports_format(connector, pipe_config->output_format)) |
| return -EINVAL; |
| |
| /* |
| * compute pipe bpp is set to false for DP MST DSC case |
| * and compressed_bpp is calculated same time once |
| * vpci timeslots are allocated, because overall bpp |
| * calculation procedure is bit different for MST case. |
| */ |
| if (compute_pipe_bpp) { |
| if (intel_dp_is_edp(intel_dp)) |
| ret = intel_edp_dsc_compute_pipe_bpp(intel_dp, pipe_config, |
| conn_state, limits); |
| else |
| ret = intel_dp_dsc_compute_pipe_bpp(intel_dp, pipe_config, |
| conn_state, limits, timeslots); |
| if (ret) { |
| drm_dbg_kms(&dev_priv->drm, |
| "No Valid pipe bpp for given mode ret = %d\n", ret); |
| return ret; |
| } |
| } |
| |
| /* Calculate Slice count */ |
| if (intel_dp_is_edp(intel_dp)) { |
| pipe_config->dsc.slice_count = |
| drm_dp_dsc_sink_max_slice_count(connector->dp.dsc_dpcd, |
| true); |
| if (!pipe_config->dsc.slice_count) { |
| drm_dbg_kms(&dev_priv->drm, "Unsupported Slice Count %d\n", |
| pipe_config->dsc.slice_count); |
| return -EINVAL; |
| } |
| } else { |
| u8 dsc_dp_slice_count; |
| |
| dsc_dp_slice_count = |
| intel_dp_dsc_get_slice_count(connector, |
| adjusted_mode->crtc_clock, |
| adjusted_mode->crtc_hdisplay, |
| pipe_config->joiner_pipes); |
| if (!dsc_dp_slice_count) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Compressed Slice Count not supported\n"); |
| return -EINVAL; |
| } |
| |
| pipe_config->dsc.slice_count = dsc_dp_slice_count; |
| } |
| /* |
| * VDSC engine operates at 1 Pixel per clock, so if peak pixel rate |
| * is greater than the maximum Cdclock and if slice count is even |
| * then we need to use 2 VDSC instances. |
| */ |
| if (pipe_config->joiner_pipes || pipe_config->dsc.slice_count > 1) |
| pipe_config->dsc.dsc_split = true; |
| |
| ret = intel_dp_dsc_compute_params(connector, pipe_config); |
| if (ret < 0) { |
| drm_dbg_kms(&dev_priv->drm, |
| "Cannot compute valid DSC parameters for Input Bpp = %d" |
| "Compressed BPP = " FXP_Q4_FMT "\n", |
| pipe_config->pipe_bpp, |
| FXP_Q4_ARGS(pipe_config->dsc.compressed_bpp_x16)); |
| return ret; |
| } |
| |
| pipe_config->dsc.compression_enable = true; |
| drm_dbg_kms(&dev_priv->drm, "DP DSC computed with Input Bpp = %d " |
| "Compressed Bpp = " FXP_Q4_FMT " Slice Count = %d\n", |
| pipe_config->pipe_bpp, |
| FXP_Q4_ARGS(pipe_config->dsc.compressed_bpp_x16), |
| pipe_config->dsc.slice_count); |
| |
| return 0; |
| } |
| |
| /** |
| * intel_dp_compute_config_link_bpp_limits - compute output link bpp limits |
| * @intel_dp: intel DP |
| * @crtc_state: crtc state |
| * @dsc: DSC compression mode |
| * @limits: link configuration limits |
| * |
| * Calculates the output link min, max bpp values in @limits based on the |
| * pipe bpp range, @crtc_state and @dsc mode. |
| * |
| * Returns %true in case of success. |
| */ |
| bool |
| intel_dp_compute_config_link_bpp_limits(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| bool dsc, |
| struct link_config_limits *limits) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->hw.adjusted_mode; |
| const struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| const struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| int max_link_bpp_x16; |
| |
| max_link_bpp_x16 = min(crtc_state->max_link_bpp_x16, |
| fxp_q4_from_int(limits->pipe.max_bpp)); |
| |
| if (!dsc) { |
| max_link_bpp_x16 = rounddown(max_link_bpp_x16, fxp_q4_from_int(2 * 3)); |
| |
| if (max_link_bpp_x16 < fxp_q4_from_int(limits->pipe.min_bpp)) |
| return false; |
| |
| limits->link.min_bpp_x16 = fxp_q4_from_int(limits->pipe.min_bpp); |
| } else { |
| /* |
| * TODO: set the DSC link limits already here, atm these are |
| * initialized only later in intel_edp_dsc_compute_pipe_bpp() / |
| * intel_dp_dsc_compute_pipe_bpp() |
| */ |
| limits->link.min_bpp_x16 = 0; |
| } |
| |
| limits->link.max_bpp_x16 = max_link_bpp_x16; |
| |
| drm_dbg_kms(&i915->drm, |
| "[ENCODER:%d:%s][CRTC:%d:%s] DP link limits: pixel clock %d kHz DSC %s max lanes %d max rate %d max pipe_bpp %d max link_bpp " FXP_Q4_FMT "\n", |
| encoder->base.base.id, encoder->base.name, |
| crtc->base.base.id, crtc->base.name, |
| adjusted_mode->crtc_clock, |
| dsc ? "on" : "off", |
| limits->max_lane_count, |
| limits->max_rate, |
| limits->pipe.max_bpp, |
| FXP_Q4_ARGS(limits->link.max_bpp_x16)); |
| |
| return true; |
| } |
| |
| static bool |
| intel_dp_compute_config_limits(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state, |
| bool respect_downstream_limits, |
| bool dsc, |
| struct link_config_limits *limits) |
| { |
| limits->min_rate = intel_dp_min_link_rate(intel_dp); |
| limits->max_rate = intel_dp_max_link_rate(intel_dp); |
| |
| /* FIXME 128b/132b SST support missing */ |
| limits->max_rate = min(limits->max_rate, 810000); |
| limits->min_rate = min(limits->min_rate, limits->max_rate); |
| |
| limits->min_lane_count = intel_dp_min_lane_count(intel_dp); |
| limits->max_lane_count = intel_dp_max_lane_count(intel_dp); |
| |
| limits->pipe.min_bpp = intel_dp_min_bpp(crtc_state->output_format); |
| limits->pipe.max_bpp = intel_dp_max_bpp(intel_dp, crtc_state, |
| respect_downstream_limits); |
| |
| if (intel_dp->use_max_params) { |
| /* |
| * Use the maximum clock and number of lanes the eDP panel |
| * advertizes being capable of in case the initial fast |
| * optimal params failed us. The panels are generally |
| * designed to support only a single clock and lane |
| * configuration, and typically on older panels these |
| * values correspond to the native resolution of the panel. |
| */ |
| limits->min_lane_count = limits->max_lane_count; |
| limits->min_rate = limits->max_rate; |
| } |
| |
| intel_dp_adjust_compliance_config(intel_dp, crtc_state, limits); |
| |
| return intel_dp_compute_config_link_bpp_limits(intel_dp, |
| crtc_state, |
| dsc, |
| limits); |
| } |
| |
| int intel_dp_config_required_rate(const struct intel_crtc_state *crtc_state) |
| { |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->hw.adjusted_mode; |
| int bpp = crtc_state->dsc.compression_enable ? |
| fxp_q4_to_int_roundup(crtc_state->dsc.compressed_bpp_x16) : |
| crtc_state->pipe_bpp; |
| |
| return intel_dp_link_required(adjusted_mode->crtc_clock, bpp); |
| } |
| |
| bool intel_dp_joiner_needs_dsc(struct drm_i915_private *i915, bool use_joiner) |
| { |
| /* |
| * Pipe joiner needs compression up to display 12 due to bandwidth |
| * limitation. DG2 onwards pipe joiner can be enabled without |
| * compression. |
| */ |
| return DISPLAY_VER(i915) < 13 && use_joiner; |
| } |
| |
| static int |
| intel_dp_compute_link_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state, |
| bool respect_downstream_limits) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc); |
| struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| const struct drm_display_mode *adjusted_mode = |
| &pipe_config->hw.adjusted_mode; |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct link_config_limits limits; |
| bool dsc_needed, joiner_needs_dsc; |
| int ret = 0; |
| |
| if (pipe_config->fec_enable && |
| !intel_dp_supports_fec(intel_dp, connector, pipe_config)) |
| return -EINVAL; |
| |
| if (intel_dp_need_joiner(intel_dp, connector, |
| adjusted_mode->crtc_hdisplay, |
| adjusted_mode->crtc_clock)) |
| pipe_config->joiner_pipes = GENMASK(crtc->pipe + 1, crtc->pipe); |
| |
| joiner_needs_dsc = intel_dp_joiner_needs_dsc(i915, pipe_config->joiner_pipes); |
| |
| dsc_needed = joiner_needs_dsc || intel_dp->force_dsc_en || |
| !intel_dp_compute_config_limits(intel_dp, pipe_config, |
| respect_downstream_limits, |
| false, |
| &limits); |
| |
| if (!dsc_needed) { |
| /* |
| * Optimize for slow and wide for everything, because there are some |
| * eDP 1.3 and 1.4 panels don't work well with fast and narrow. |
| */ |
| ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config, |
| conn_state, &limits); |
| if (ret) |
| dsc_needed = true; |
| } |
| |
| if (dsc_needed) { |
| drm_dbg_kms(&i915->drm, "Try DSC (fallback=%s, joiner=%s, force=%s)\n", |
| str_yes_no(ret), str_yes_no(joiner_needs_dsc), |
| str_yes_no(intel_dp->force_dsc_en)); |
| |
| if (!intel_dp_compute_config_limits(intel_dp, pipe_config, |
| respect_downstream_limits, |
| true, |
| &limits)) |
| return -EINVAL; |
| |
| ret = intel_dp_dsc_compute_config(intel_dp, pipe_config, |
| conn_state, &limits, 64, true); |
| if (ret < 0) |
| return ret; |
| } |
| |
| drm_dbg_kms(&i915->drm, |
| "DP lane count %d clock %d bpp input %d compressed " FXP_Q4_FMT " link rate required %d available %d\n", |
| pipe_config->lane_count, pipe_config->port_clock, |
| pipe_config->pipe_bpp, |
| FXP_Q4_ARGS(pipe_config->dsc.compressed_bpp_x16), |
| intel_dp_config_required_rate(pipe_config), |
| intel_dp_max_link_data_rate(intel_dp, |
| pipe_config->port_clock, |
| pipe_config->lane_count)); |
| |
| return 0; |
| } |
| |
| bool intel_dp_limited_color_range(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| const struct intel_digital_connector_state *intel_conn_state = |
| to_intel_digital_connector_state(conn_state); |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->hw.adjusted_mode; |
| |
| /* |
| * Our YCbCr output is always limited range. |
| * crtc_state->limited_color_range only applies to RGB, |
| * and it must never be set for YCbCr or we risk setting |
| * some conflicting bits in TRANSCONF which will mess up |
| * the colors on the monitor. |
| */ |
| if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB) |
| return false; |
| |
| if (intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_AUTO) { |
| /* |
| * See: |
| * CEA-861-E - 5.1 Default Encoding Parameters |
| * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry |
| */ |
| return crtc_state->pipe_bpp != 18 && |
| drm_default_rgb_quant_range(adjusted_mode) == |
| HDMI_QUANTIZATION_RANGE_LIMITED; |
| } else { |
| return intel_conn_state->broadcast_rgb == |
| INTEL_BROADCAST_RGB_LIMITED; |
| } |
| } |
| |
| static bool intel_dp_port_has_audio(struct drm_i915_private *dev_priv, |
| enum port port) |
| { |
| if (IS_G4X(dev_priv)) |
| return false; |
| if (DISPLAY_VER(dev_priv) < 12 && port == PORT_A) |
| return false; |
| |
| return true; |
| } |
| |
| static void intel_dp_compute_vsc_colorimetry(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state, |
| struct drm_dp_vsc_sdp *vsc) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| |
| if (crtc_state->has_panel_replay) { |
| /* |
| * Prepare VSC Header for SU as per DP 2.0 spec, Table 2-223 |
| * VSC SDP supporting 3D stereo, Panel Replay, and Pixel |
| * Encoding/Colorimetry Format indication. |
| */ |
| vsc->revision = 0x7; |
| } else { |
| /* |
| * Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118 |
| * VSC SDP supporting 3D stereo, PSR2, and Pixel Encoding/ |
| * Colorimetry Format indication. |
| */ |
| vsc->revision = 0x5; |
| } |
| |
| vsc->length = 0x13; |
| |
| /* DP 1.4a spec, Table 2-120 */ |
| switch (crtc_state->output_format) { |
| case INTEL_OUTPUT_FORMAT_YCBCR444: |
| vsc->pixelformat = DP_PIXELFORMAT_YUV444; |
| break; |
| case INTEL_OUTPUT_FORMAT_YCBCR420: |
| vsc->pixelformat = DP_PIXELFORMAT_YUV420; |
| break; |
| case INTEL_OUTPUT_FORMAT_RGB: |
| default: |
| vsc->pixelformat = DP_PIXELFORMAT_RGB; |
| } |
| |
| switch (conn_state->colorspace) { |
| case DRM_MODE_COLORIMETRY_BT709_YCC: |
| vsc->colorimetry = DP_COLORIMETRY_BT709_YCC; |
| break; |
| case DRM_MODE_COLORIMETRY_XVYCC_601: |
| vsc->colorimetry = DP_COLORIMETRY_XVYCC_601; |
| break; |
| case DRM_MODE_COLORIMETRY_XVYCC_709: |
| vsc->colorimetry = DP_COLORIMETRY_XVYCC_709; |
| break; |
| case DRM_MODE_COLORIMETRY_SYCC_601: |
| vsc->colorimetry = DP_COLORIMETRY_SYCC_601; |
| break; |
| case DRM_MODE_COLORIMETRY_OPYCC_601: |
| vsc->colorimetry = DP_COLORIMETRY_OPYCC_601; |
| break; |
| case DRM_MODE_COLORIMETRY_BT2020_CYCC: |
| vsc->colorimetry = DP_COLORIMETRY_BT2020_CYCC; |
| break; |
| case DRM_MODE_COLORIMETRY_BT2020_RGB: |
| vsc->colorimetry = DP_COLORIMETRY_BT2020_RGB; |
| break; |
| case DRM_MODE_COLORIMETRY_BT2020_YCC: |
| vsc->colorimetry = DP_COLORIMETRY_BT2020_YCC; |
| break; |
| case DRM_MODE_COLORIMETRY_DCI_P3_RGB_D65: |
| case DRM_MODE_COLORIMETRY_DCI_P3_RGB_THEATER: |
| vsc->colorimetry = DP_COLORIMETRY_DCI_P3_RGB; |
| break; |
| default: |
| /* |
| * RGB->YCBCR color conversion uses the BT.709 |
| * color space. |
| */ |
| if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) |
| vsc->colorimetry = DP_COLORIMETRY_BT709_YCC; |
| else |
| vsc->colorimetry = DP_COLORIMETRY_DEFAULT; |
| break; |
| } |
| |
| vsc->bpc = crtc_state->pipe_bpp / 3; |
| |
| /* only RGB pixelformat supports 6 bpc */ |
| drm_WARN_ON(&dev_priv->drm, |
| vsc->bpc == 6 && vsc->pixelformat != DP_PIXELFORMAT_RGB); |
| |
| /* all YCbCr are always limited range */ |
| vsc->dynamic_range = DP_DYNAMIC_RANGE_CTA; |
| vsc->content_type = DP_CONTENT_TYPE_NOT_DEFINED; |
| } |
| |
| static void intel_dp_compute_as_sdp(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct drm_dp_as_sdp *as_sdp = &crtc_state->infoframes.as_sdp; |
| const struct drm_display_mode *adjusted_mode = |
| &crtc_state->hw.adjusted_mode; |
| |
| if (!crtc_state->vrr.enable || !intel_dp->as_sdp_supported) |
| return; |
| |
| crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_ADAPTIVE_SYNC); |
| |
| /* Currently only DP_AS_SDP_AVT_FIXED_VTOTAL mode supported */ |
| as_sdp->sdp_type = DP_SDP_ADAPTIVE_SYNC; |
| as_sdp->length = 0x9; |
| as_sdp->duration_incr_ms = 0; |
| as_sdp->duration_incr_ms = 0; |
| |
| if (crtc_state->cmrr.enable) { |
| as_sdp->mode = DP_AS_SDP_FAVT_TRR_REACHED; |
| as_sdp->vtotal = adjusted_mode->vtotal; |
| as_sdp->target_rr = drm_mode_vrefresh(adjusted_mode); |
| as_sdp->target_rr_divider = true; |
| } else { |
| as_sdp->mode = DP_AS_SDP_AVT_FIXED_VTOTAL; |
| as_sdp->vtotal = adjusted_mode->vtotal; |
| as_sdp->target_rr = 0; |
| } |
| } |
| |
| static void intel_dp_compute_vsc_sdp(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct drm_dp_vsc_sdp *vsc; |
| |
| if ((!intel_dp->colorimetry_support || |
| !intel_dp_needs_vsc_sdp(crtc_state, conn_state)) && |
| !crtc_state->has_psr) |
| return; |
| |
| vsc = &crtc_state->infoframes.vsc; |
| |
| crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_VSC); |
| vsc->sdp_type = DP_SDP_VSC; |
| |
| /* Needs colorimetry */ |
| if (intel_dp_needs_vsc_sdp(crtc_state, conn_state)) { |
| intel_dp_compute_vsc_colorimetry(crtc_state, conn_state, |
| vsc); |
| } else if (crtc_state->has_panel_replay) { |
| /* |
| * [Panel Replay without colorimetry info] |
| * Prepare VSC Header for SU as per DP 2.0 spec, Table 2-223 |
| * VSC SDP supporting 3D stereo + Panel Replay. |
| */ |
| vsc->revision = 0x6; |
| vsc->length = 0x10; |
| } else if (crtc_state->has_sel_update) { |
| /* |
| * [PSR2 without colorimetry] |
| * Prepare VSC Header for SU as per eDP 1.4 spec, Table 6-11 |
| * 3D stereo + PSR/PSR2 + Y-coordinate. |
| */ |
| vsc->revision = 0x4; |
| vsc->length = 0xe; |
| } else { |
| /* |
| * [PSR1] |
| * Prepare VSC Header for SU as per DP 1.4 spec, Table 2-118 |
| * VSC SDP supporting 3D stereo + PSR (applies to eDP v1.3 or |
| * higher). |
| */ |
| vsc->revision = 0x2; |
| vsc->length = 0x8; |
| } |
| } |
| |
| static void |
| intel_dp_compute_hdr_metadata_infoframe_sdp(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| int ret; |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| struct hdmi_drm_infoframe *drm_infoframe = &crtc_state->infoframes.drm.drm; |
| |
| if (!conn_state->hdr_output_metadata) |
| return; |
| |
| ret = drm_hdmi_infoframe_set_hdr_metadata(drm_infoframe, conn_state); |
| |
| if (ret) { |
| drm_dbg_kms(&dev_priv->drm, "couldn't set HDR metadata in infoframe\n"); |
| return; |
| } |
| |
| crtc_state->infoframes.enable |= |
| intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GAMUT_METADATA); |
| } |
| |
| static bool can_enable_drrs(struct intel_connector *connector, |
| const struct intel_crtc_state *pipe_config, |
| const struct drm_display_mode *downclock_mode) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| if (pipe_config->vrr.enable) |
| return false; |
| |
| /* |
| * DRRS and PSR can't be enable together, so giving preference to PSR |
| * as it allows more power-savings by complete shutting down display, |
| * so to guarantee this, intel_drrs_compute_config() must be called |
| * after intel_psr_compute_config(). |
| */ |
| if (pipe_config->has_psr) |
| return false; |
| |
| /* FIXME missing FDI M2/N2 etc. */ |
| if (pipe_config->has_pch_encoder) |
| return false; |
| |
| if (!intel_cpu_transcoder_has_drrs(i915, pipe_config->cpu_transcoder)) |
| return false; |
| |
| return downclock_mode && |
| intel_panel_drrs_type(connector) == DRRS_TYPE_SEAMLESS; |
| } |
| |
| static void |
| intel_dp_drrs_compute_config(struct intel_connector *connector, |
| struct intel_crtc_state *pipe_config, |
| int link_bpp_x16) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| const struct drm_display_mode *downclock_mode = |
| intel_panel_downclock_mode(connector, &pipe_config->hw.adjusted_mode); |
| int pixel_clock; |
| |
| /* |
| * FIXME all joined pipes share the same transcoder. |
| * Need to account for that when updating M/N live. |
| */ |
| if (has_seamless_m_n(connector) && !pipe_config->joiner_pipes) |
| pipe_config->update_m_n = true; |
| |
| if (!can_enable_drrs(connector, pipe_config, downclock_mode)) { |
| if (intel_cpu_transcoder_has_m2_n2(i915, pipe_config->cpu_transcoder)) |
| intel_zero_m_n(&pipe_config->dp_m2_n2); |
| return; |
| } |
| |
| if (IS_IRONLAKE(i915) || IS_SANDYBRIDGE(i915) || IS_IVYBRIDGE(i915)) |
| pipe_config->msa_timing_delay = connector->panel.vbt.edp.drrs_msa_timing_delay; |
| |
| pipe_config->has_drrs = true; |
| |
| pixel_clock = downclock_mode->clock; |
| if (pipe_config->splitter.enable) |
| pixel_clock /= pipe_config->splitter.link_count; |
| |
| intel_link_compute_m_n(link_bpp_x16, pipe_config->lane_count, pixel_clock, |
| pipe_config->port_clock, |
| intel_dp_bw_fec_overhead(pipe_config->fec_enable), |
| &pipe_config->dp_m2_n2); |
| |
| /* FIXME: abstract this better */ |
| if (pipe_config->splitter.enable) |
| pipe_config->dp_m2_n2.data_m *= pipe_config->splitter.link_count; |
| } |
| |
| static bool intel_dp_has_audio(struct intel_encoder *encoder, |
| const struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| const struct intel_digital_connector_state *intel_conn_state = |
| to_intel_digital_connector_state(conn_state); |
| struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| |
| if (!intel_dp_port_has_audio(i915, encoder->port)) |
| return false; |
| |
| if (intel_conn_state->force_audio == HDMI_AUDIO_AUTO) |
| return connector->base.display_info.has_audio; |
| else |
| return intel_conn_state->force_audio == HDMI_AUDIO_ON; |
| } |
| |
| static int |
| intel_dp_compute_output_format(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state, |
| bool respect_downstream_limits) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct intel_connector *connector = intel_dp->attached_connector; |
| const struct drm_display_info *info = &connector->base.display_info; |
| const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; |
| bool ycbcr_420_only; |
| int ret; |
| |
| ycbcr_420_only = drm_mode_is_420_only(info, adjusted_mode); |
| |
| if (ycbcr_420_only && !connector->base.ycbcr_420_allowed) { |
| drm_dbg_kms(&i915->drm, |
| "YCbCr 4:2:0 mode but YCbCr 4:2:0 output not possible. Falling back to RGB.\n"); |
| crtc_state->sink_format = INTEL_OUTPUT_FORMAT_RGB; |
| } else { |
| crtc_state->sink_format = intel_dp_sink_format(connector, adjusted_mode); |
| } |
| |
| crtc_state->output_format = intel_dp_output_format(connector, crtc_state->sink_format); |
| |
| ret = intel_dp_compute_link_config(encoder, crtc_state, conn_state, |
| respect_downstream_limits); |
| if (ret) { |
| if (crtc_state->sink_format == INTEL_OUTPUT_FORMAT_YCBCR420 || |
| !connector->base.ycbcr_420_allowed || |
| !drm_mode_is_420_also(info, adjusted_mode)) |
| return ret; |
| |
| crtc_state->sink_format = INTEL_OUTPUT_FORMAT_YCBCR420; |
| crtc_state->output_format = intel_dp_output_format(connector, |
| crtc_state->sink_format); |
| ret = intel_dp_compute_link_config(encoder, crtc_state, conn_state, |
| respect_downstream_limits); |
| } |
| |
| return ret; |
| } |
| |
| void |
| intel_dp_audio_compute_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state) |
| { |
| pipe_config->has_audio = |
| intel_dp_has_audio(encoder, conn_state) && |
| intel_audio_compute_config(encoder, pipe_config, conn_state); |
| |
| pipe_config->sdp_split_enable = pipe_config->has_audio && |
| intel_dp_is_uhbr(pipe_config); |
| } |
| |
| static void intel_dp_queue_modeset_retry_work(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| drm_connector_get(&connector->base); |
| if (!queue_work(i915->unordered_wq, &connector->modeset_retry_work)) |
| drm_connector_put(&connector->base); |
| } |
| |
| void |
| intel_dp_queue_modeset_retry_for_link(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_connector *connector; |
| struct intel_digital_connector_state *conn_state; |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| int i; |
| |
| if (intel_dp->needs_modeset_retry) |
| return; |
| |
| intel_dp->needs_modeset_retry = true; |
| |
| if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) { |
| intel_dp_queue_modeset_retry_work(intel_dp->attached_connector); |
| |
| return; |
| } |
| |
| for_each_new_intel_connector_in_state(state, connector, conn_state, i) { |
| if (!conn_state->base.crtc) |
| continue; |
| |
| if (connector->mst_port == intel_dp) |
| intel_dp_queue_modeset_retry_work(connector); |
| } |
| } |
| |
| int |
| intel_dp_compute_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config, |
| struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_atomic_state *state = to_intel_atomic_state(conn_state->state); |
| struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode; |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| const struct drm_display_mode *fixed_mode; |
| struct intel_connector *connector = intel_dp->attached_connector; |
| int ret = 0, link_bpp_x16; |
| |
| if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv) && encoder->port != PORT_A) |
| pipe_config->has_pch_encoder = true; |
| |
| fixed_mode = intel_panel_fixed_mode(connector, adjusted_mode); |
| if (intel_dp_is_edp(intel_dp) && fixed_mode) { |
| ret = intel_panel_compute_config(connector, adjusted_mode); |
| if (ret) |
| return ret; |
| } |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) |
| return -EINVAL; |
| |
| if (!connector->base.interlace_allowed && |
| adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) |
| return -EINVAL; |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) |
| return -EINVAL; |
| |
| if (intel_dp_hdisplay_bad(dev_priv, adjusted_mode->crtc_hdisplay)) |
| return -EINVAL; |
| |
| /* |
| * Try to respect downstream TMDS clock limits first, if |
| * that fails assume the user might know something we don't. |
| */ |
| ret = intel_dp_compute_output_format(encoder, pipe_config, conn_state, true); |
| if (ret) |
| ret = intel_dp_compute_output_format(encoder, pipe_config, conn_state, false); |
| if (ret) |
| return ret; |
| |
| if ((intel_dp_is_edp(intel_dp) && fixed_mode) || |
| pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) { |
| ret = intel_panel_fitting(pipe_config, conn_state); |
| if (ret) |
| return ret; |
| } |
| |
| pipe_config->limited_color_range = |
| intel_dp_limited_color_range(pipe_config, conn_state); |
| |
| pipe_config->enhanced_framing = |
| drm_dp_enhanced_frame_cap(intel_dp->dpcd); |
| |
| if (pipe_config->dsc.compression_enable) |
| link_bpp_x16 = pipe_config->dsc.compressed_bpp_x16; |
| else |
| link_bpp_x16 = fxp_q4_from_int(intel_dp_output_bpp(pipe_config->output_format, |
| pipe_config->pipe_bpp)); |
| |
| if (intel_dp->mso_link_count) { |
| int n = intel_dp->mso_link_count; |
| int overlap = intel_dp->mso_pixel_overlap; |
| |
| pipe_config->splitter.enable = true; |
| pipe_config->splitter.link_count = n; |
| pipe_config->splitter.pixel_overlap = overlap; |
| |
| drm_dbg_kms(&dev_priv->drm, "MSO link count %d, pixel overlap %d\n", |
| n, overlap); |
| |
| adjusted_mode->crtc_hdisplay = adjusted_mode->crtc_hdisplay / n + overlap; |
| adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hblank_start / n + overlap; |
| adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_hblank_end / n + overlap; |
| adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hsync_start / n + overlap; |
| adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_end / n + overlap; |
| adjusted_mode->crtc_htotal = adjusted_mode->crtc_htotal / n + overlap; |
| adjusted_mode->crtc_clock /= n; |
| } |
| |
| intel_dp_audio_compute_config(encoder, pipe_config, conn_state); |
| |
| intel_link_compute_m_n(link_bpp_x16, |
| pipe_config->lane_count, |
| adjusted_mode->crtc_clock, |
| pipe_config->port_clock, |
| intel_dp_bw_fec_overhead(pipe_config->fec_enable), |
| &pipe_config->dp_m_n); |
| |
| /* FIXME: abstract this better */ |
| if (pipe_config->splitter.enable) |
| pipe_config->dp_m_n.data_m *= pipe_config->splitter.link_count; |
| |
| if (!HAS_DDI(dev_priv)) |
| g4x_dp_set_clock(encoder, pipe_config); |
| |
| intel_vrr_compute_config(pipe_config, conn_state); |
| intel_dp_compute_as_sdp(intel_dp, pipe_config); |
| intel_psr_compute_config(intel_dp, pipe_config, conn_state); |
| intel_alpm_lobf_compute_config(intel_dp, pipe_config, conn_state); |
| intel_dp_drrs_compute_config(connector, pipe_config, link_bpp_x16); |
| intel_dp_compute_vsc_sdp(intel_dp, pipe_config, conn_state); |
| intel_dp_compute_hdr_metadata_infoframe_sdp(intel_dp, pipe_config, conn_state); |
| |
| return intel_dp_tunnel_atomic_compute_stream_bw(state, intel_dp, connector, |
| pipe_config); |
| } |
| |
| void intel_dp_set_link_params(struct intel_dp *intel_dp, |
| int link_rate, int lane_count) |
| { |
| memset(intel_dp->train_set, 0, sizeof(intel_dp->train_set)); |
| intel_dp->link_trained = false; |
| intel_dp->needs_modeset_retry = false; |
| intel_dp->link_rate = link_rate; |
| intel_dp->lane_count = lane_count; |
| } |
| |
| void intel_dp_reset_link_params(struct intel_dp *intel_dp) |
| { |
| intel_dp->link.max_lane_count = intel_dp_max_common_lane_count(intel_dp); |
| intel_dp->link.max_rate = intel_dp_max_common_rate(intel_dp); |
| intel_dp->link.mst_probed_lane_count = 0; |
| intel_dp->link.mst_probed_rate = 0; |
| intel_dp->link.retrain_disabled = false; |
| intel_dp->link.seq_train_failures = 0; |
| } |
| |
| /* Enable backlight PWM and backlight PP control. */ |
| void intel_edp_backlight_on(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(conn_state->best_encoder)); |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| if (!intel_dp_is_edp(intel_dp)) |
| return; |
| |
| drm_dbg_kms(&i915->drm, "\n"); |
| |
| intel_backlight_enable(crtc_state, conn_state); |
| intel_pps_backlight_on(intel_dp); |
| } |
| |
| /* Disable backlight PP control and backlight PWM. */ |
| void intel_edp_backlight_off(const struct drm_connector_state *old_conn_state) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(to_intel_encoder(old_conn_state->best_encoder)); |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| if (!intel_dp_is_edp(intel_dp)) |
| return; |
| |
| drm_dbg_kms(&i915->drm, "\n"); |
| |
| intel_pps_backlight_off(intel_dp); |
| intel_backlight_disable(old_conn_state); |
| } |
| |
| static bool downstream_hpd_needs_d0(struct intel_dp *intel_dp) |
| { |
| /* |
| * DPCD 1.2+ should support BRANCH_DEVICE_CTRL, and thus |
| * be capable of signalling downstream hpd with a long pulse. |
| * Whether or not that means D3 is safe to use is not clear, |
| * but let's assume so until proven otherwise. |
| * |
| * FIXME should really check all downstream ports... |
| */ |
| return intel_dp->dpcd[DP_DPCD_REV] == 0x11 && |
| drm_dp_is_branch(intel_dp->dpcd) && |
| intel_dp->downstream_ports[0] & DP_DS_PORT_HPD; |
| } |
| |
| static int |
| write_dsc_decompression_flag(struct drm_dp_aux *aux, u8 flag, bool set) |
| { |
| int err; |
| u8 val; |
| |
| err = drm_dp_dpcd_readb(aux, DP_DSC_ENABLE, &val); |
| if (err < 0) |
| return err; |
| |
| if (set) |
| val |= flag; |
| else |
| val &= ~flag; |
| |
| return drm_dp_dpcd_writeb(aux, DP_DSC_ENABLE, val); |
| } |
| |
| static void |
| intel_dp_sink_set_dsc_decompression(struct intel_connector *connector, |
| bool enable) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| if (write_dsc_decompression_flag(connector->dp.dsc_decompression_aux, |
| DP_DECOMPRESSION_EN, enable) < 0) |
| drm_dbg_kms(&i915->drm, |
| "Failed to %s sink decompression state\n", |
| str_enable_disable(enable)); |
| } |
| |
| static void |
| intel_dp_sink_set_dsc_passthrough(const struct intel_connector *connector, |
| bool enable) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct drm_dp_aux *aux = connector->port ? |
| connector->port->passthrough_aux : NULL; |
| |
| if (!aux) |
| return; |
| |
| if (write_dsc_decompression_flag(aux, |
| DP_DSC_PASSTHROUGH_EN, enable) < 0) |
| drm_dbg_kms(&i915->drm, |
| "Failed to %s sink compression passthrough state\n", |
| str_enable_disable(enable)); |
| } |
| |
| static int intel_dp_dsc_aux_ref_count(struct intel_atomic_state *state, |
| const struct intel_connector *connector, |
| bool for_get_ref) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| struct drm_connector *_connector_iter; |
| struct drm_connector_state *old_conn_state; |
| struct drm_connector_state *new_conn_state; |
| int ref_count = 0; |
| int i; |
| |
| /* |
| * On SST the decompression AUX device won't be shared, each connector |
| * uses for this its own AUX targeting the sink device. |
| */ |
| if (!connector->mst_port) |
| return connector->dp.dsc_decompression_enabled ? 1 : 0; |
| |
| for_each_oldnew_connector_in_state(&state->base, _connector_iter, |
| old_conn_state, new_conn_state, i) { |
| const struct intel_connector * |
| connector_iter = to_intel_connector(_connector_iter); |
| |
| if (connector_iter->mst_port != connector->mst_port) |
| continue; |
| |
| if (!connector_iter->dp.dsc_decompression_enabled) |
| continue; |
| |
| drm_WARN_ON(&i915->drm, |
| (for_get_ref && !new_conn_state->crtc) || |
| (!for_get_ref && !old_conn_state->crtc)); |
| |
| if (connector_iter->dp.dsc_decompression_aux == |
| connector->dp.dsc_decompression_aux) |
| ref_count++; |
| } |
| |
| return ref_count; |
| } |
| |
| static bool intel_dp_dsc_aux_get_ref(struct intel_atomic_state *state, |
| struct intel_connector *connector) |
| { |
| bool ret = intel_dp_dsc_aux_ref_count(state, connector, true) == 0; |
| |
| connector->dp.dsc_decompression_enabled = true; |
| |
| return ret; |
| } |
| |
| static bool intel_dp_dsc_aux_put_ref(struct intel_atomic_state *state, |
| struct intel_connector *connector) |
| { |
| connector->dp.dsc_decompression_enabled = false; |
| |
| return intel_dp_dsc_aux_ref_count(state, connector, false) == 0; |
| } |
| |
| /** |
| * intel_dp_sink_enable_decompression - Enable DSC decompression in sink/last branch device |
| * @state: atomic state |
| * @connector: connector to enable the decompression for |
| * @new_crtc_state: new state for the CRTC driving @connector |
| * |
| * Enable the DSC decompression if required in the %DP_DSC_ENABLE DPCD |
| * register of the appropriate sink/branch device. On SST this is always the |
| * sink device, whereas on MST based on each device's DSC capabilities it's |
| * either the last branch device (enabling decompression in it) or both the |
| * last branch device (enabling passthrough in it) and the sink device |
| * (enabling decompression in it). |
| */ |
| void intel_dp_sink_enable_decompression(struct intel_atomic_state *state, |
| struct intel_connector *connector, |
| const struct intel_crtc_state *new_crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| |
| if (!new_crtc_state->dsc.compression_enable) |
| return; |
| |
| if (drm_WARN_ON(&i915->drm, |
| !connector->dp.dsc_decompression_aux || |
| connector->dp.dsc_decompression_enabled)) |
| return; |
| |
| if (!intel_dp_dsc_aux_get_ref(state, connector)) |
| return; |
| |
| intel_dp_sink_set_dsc_passthrough(connector, true); |
| intel_dp_sink_set_dsc_decompression(connector, true); |
| } |
| |
| /** |
| * intel_dp_sink_disable_decompression - Disable DSC decompression in sink/last branch device |
| * @state: atomic state |
| * @connector: connector to disable the decompression for |
| * @old_crtc_state: old state for the CRTC driving @connector |
| * |
| * Disable the DSC decompression if required in the %DP_DSC_ENABLE DPCD |
| * register of the appropriate sink/branch device, corresponding to the |
| * sequence in intel_dp_sink_enable_decompression(). |
| */ |
| void intel_dp_sink_disable_decompression(struct intel_atomic_state *state, |
| struct intel_connector *connector, |
| const struct intel_crtc_state *old_crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| |
| if (!old_crtc_state->dsc.compression_enable) |
| return; |
| |
| if (drm_WARN_ON(&i915->drm, |
| !connector->dp.dsc_decompression_aux || |
| !connector->dp.dsc_decompression_enabled)) |
| return; |
| |
| if (!intel_dp_dsc_aux_put_ref(state, connector)) |
| return; |
| |
| intel_dp_sink_set_dsc_decompression(connector, false); |
| intel_dp_sink_set_dsc_passthrough(connector, false); |
| } |
| |
| static void |
| intel_edp_init_source_oui(struct intel_dp *intel_dp, bool careful) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| u8 oui[] = { 0x00, 0xaa, 0x01 }; |
| u8 buf[3] = {}; |
| |
| /* |
| * During driver init, we want to be careful and avoid changing the source OUI if it's |
| * already set to what we want, so as to avoid clearing any state by accident |
| */ |
| if (careful) { |
| if (drm_dp_dpcd_read(&intel_dp->aux, DP_SOURCE_OUI, buf, sizeof(buf)) < 0) |
| drm_err(&i915->drm, "Failed to read source OUI\n"); |
| |
| if (memcmp(oui, buf, sizeof(oui)) == 0) |
| return; |
| } |
| |
| if (drm_dp_dpcd_write(&intel_dp->aux, DP_SOURCE_OUI, oui, sizeof(oui)) < 0) |
| drm_err(&i915->drm, "Failed to write source OUI\n"); |
| |
| intel_dp->last_oui_write = jiffies; |
| } |
| |
| void intel_dp_wait_source_oui(struct intel_dp *intel_dp) |
| { |
| struct intel_connector *connector = intel_dp->attached_connector; |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] Performing OUI wait (%u ms)\n", |
| connector->base.base.id, connector->base.name, |
| connector->panel.vbt.backlight.hdr_dpcd_refresh_timeout); |
| |
| wait_remaining_ms_from_jiffies(intel_dp->last_oui_write, |
| connector->panel.vbt.backlight.hdr_dpcd_refresh_timeout); |
| } |
| |
| /* If the device supports it, try to set the power state appropriately */ |
| void intel_dp_set_power(struct intel_dp *intel_dp, u8 mode) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| int ret, i; |
| |
| /* Should have a valid DPCD by this point */ |
| if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) |
| return; |
| |
| if (mode != DP_SET_POWER_D0) { |
| if (downstream_hpd_needs_d0(intel_dp)) |
| return; |
| |
| ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode); |
| } else { |
| struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp); |
| |
| lspcon_resume(dp_to_dig_port(intel_dp)); |
| |
| /* Write the source OUI as early as possible */ |
| if (intel_dp_is_edp(intel_dp)) |
| intel_edp_init_source_oui(intel_dp, false); |
| |
| /* |
| * When turning on, we need to retry for 1ms to give the sink |
| * time to wake up. |
| */ |
| for (i = 0; i < 3; i++) { |
| ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode); |
| if (ret == 1) |
| break; |
| msleep(1); |
| } |
| |
| if (ret == 1 && lspcon->active) |
| lspcon_wait_pcon_mode(lspcon); |
| } |
| |
| if (ret != 1) |
| drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Set power to %s failed\n", |
| encoder->base.base.id, encoder->base.name, |
| mode == DP_SET_POWER_D0 ? "D0" : "D3"); |
| } |
| |
| static bool |
| intel_dp_get_dpcd(struct intel_dp *intel_dp); |
| |
| /** |
| * intel_dp_sync_state - sync the encoder state during init/resume |
| * @encoder: intel encoder to sync |
| * @crtc_state: state for the CRTC connected to the encoder |
| * |
| * Sync any state stored in the encoder wrt. HW state during driver init |
| * and system resume. |
| */ |
| void intel_dp_sync_state(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| bool dpcd_updated = false; |
| |
| /* |
| * Don't clobber DPCD if it's been already read out during output |
| * setup (eDP) or detect. |
| */ |
| if (crtc_state && intel_dp->dpcd[DP_DPCD_REV] == 0) { |
| intel_dp_get_dpcd(intel_dp); |
| dpcd_updated = true; |
| } |
| |
| intel_dp_tunnel_resume(intel_dp, crtc_state, dpcd_updated); |
| |
| if (crtc_state) { |
| intel_dp_reset_link_params(intel_dp); |
| intel_dp_set_link_params(intel_dp, crtc_state->port_clock, crtc_state->lane_count); |
| intel_dp->link_trained = true; |
| } |
| } |
| |
| bool intel_dp_initial_fastset_check(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| bool fastset = true; |
| |
| /* |
| * If BIOS has set an unsupported or non-standard link rate for some |
| * reason force an encoder recompute and full modeset. |
| */ |
| if (intel_dp_rate_index(intel_dp->source_rates, intel_dp->num_source_rates, |
| crtc_state->port_clock) < 0) { |
| drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Forcing full modeset due to unsupported link rate\n", |
| encoder->base.base.id, encoder->base.name); |
| crtc_state->uapi.connectors_changed = true; |
| fastset = false; |
| } |
| |
| /* |
| * FIXME hack to force full modeset when DSC is being used. |
| * |
| * As long as we do not have full state readout and config comparison |
| * of crtc_state->dsc, we have no way to ensure reliable fastset. |
| * Remove once we have readout for DSC. |
| */ |
| if (crtc_state->dsc.compression_enable) { |
| drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Forcing full modeset due to DSC being enabled\n", |
| encoder->base.base.id, encoder->base.name); |
| crtc_state->uapi.mode_changed = true; |
| fastset = false; |
| } |
| |
| if (CAN_PANEL_REPLAY(intel_dp)) { |
| drm_dbg_kms(&i915->drm, |
| "[ENCODER:%d:%s] Forcing full modeset to compute panel replay state\n", |
| encoder->base.base.id, encoder->base.name); |
| crtc_state->uapi.mode_changed = true; |
| fastset = false; |
| } |
| |
| return fastset; |
| } |
| |
| static void intel_dp_get_pcon_dsc_cap(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| /* Clear the cached register set to avoid using stale values */ |
| |
| memset(intel_dp->pcon_dsc_dpcd, 0, sizeof(intel_dp->pcon_dsc_dpcd)); |
| |
| if (drm_dp_dpcd_read(&intel_dp->aux, DP_PCON_DSC_ENCODER, |
| intel_dp->pcon_dsc_dpcd, |
| sizeof(intel_dp->pcon_dsc_dpcd)) < 0) |
| drm_err(&i915->drm, "Failed to read DPCD register 0x%x\n", |
| DP_PCON_DSC_ENCODER); |
| |
| drm_dbg_kms(&i915->drm, "PCON ENCODER DSC DPCD: %*ph\n", |
| (int)sizeof(intel_dp->pcon_dsc_dpcd), intel_dp->pcon_dsc_dpcd); |
| } |
| |
| static int intel_dp_pcon_get_frl_mask(u8 frl_bw_mask) |
| { |
| static const int bw_gbps[] = {9, 18, 24, 32, 40, 48}; |
| int i; |
| |
| for (i = ARRAY_SIZE(bw_gbps) - 1; i >= 0; i--) { |
| if (frl_bw_mask & (1 << i)) |
| return bw_gbps[i]; |
| } |
| return 0; |
| } |
| |
| static int intel_dp_pcon_set_frl_mask(int max_frl) |
| { |
| switch (max_frl) { |
| case 48: |
| return DP_PCON_FRL_BW_MASK_48GBPS; |
| case 40: |
| return DP_PCON_FRL_BW_MASK_40GBPS; |
| case 32: |
| return DP_PCON_FRL_BW_MASK_32GBPS; |
| case 24: |
| return DP_PCON_FRL_BW_MASK_24GBPS; |
| case 18: |
| return DP_PCON_FRL_BW_MASK_18GBPS; |
| case 9: |
| return DP_PCON_FRL_BW_MASK_9GBPS; |
| } |
| |
| return 0; |
| } |
| |
| static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp) |
| { |
| struct intel_connector *intel_connector = intel_dp->attached_connector; |
| struct drm_connector *connector = &intel_connector->base; |
| int max_frl_rate; |
| int max_lanes, rate_per_lane; |
| int max_dsc_lanes, dsc_rate_per_lane; |
| |
| max_lanes = connector->display_info.hdmi.max_lanes; |
| rate_per_lane = connector->display_info.hdmi.max_frl_rate_per_lane; |
| max_frl_rate = max_lanes * rate_per_lane; |
| |
| if (connector->display_info.hdmi.dsc_cap.v_1p2) { |
| max_dsc_lanes = connector->display_info.hdmi.dsc_cap.max_lanes; |
| dsc_rate_per_lane = connector->display_info.hdmi.dsc_cap.max_frl_rate_per_lane; |
| if (max_dsc_lanes && dsc_rate_per_lane) |
| max_frl_rate = min(max_frl_rate, max_dsc_lanes * dsc_rate_per_lane); |
| } |
| |
| return max_frl_rate; |
| } |
| |
| static bool |
| intel_dp_pcon_is_frl_trained(struct intel_dp *intel_dp, |
| u8 max_frl_bw_mask, u8 *frl_trained_mask) |
| { |
| if (drm_dp_pcon_hdmi_link_active(&intel_dp->aux) && |
| drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, frl_trained_mask) == DP_PCON_HDMI_MODE_FRL && |
| *frl_trained_mask >= max_frl_bw_mask) |
| return true; |
| |
| return false; |
| } |
| |
| static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp) |
| { |
| #define TIMEOUT_FRL_READY_MS 500 |
| #define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000 |
| |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| int max_frl_bw, max_pcon_frl_bw, max_edid_frl_bw, ret; |
| u8 max_frl_bw_mask = 0, frl_trained_mask; |
| bool is_active; |
| |
| max_pcon_frl_bw = intel_dp->dfp.pcon_max_frl_bw; |
| drm_dbg(&i915->drm, "PCON max rate = %d Gbps\n", max_pcon_frl_bw); |
| |
| max_edid_frl_bw = intel_dp_hdmi_sink_max_frl(intel_dp); |
| drm_dbg(&i915->drm, "Sink max rate from EDID = %d Gbps\n", max_edid_frl_bw); |
| |
| max_frl_bw = min(max_edid_frl_bw, max_pcon_frl_bw); |
| |
| if (max_frl_bw <= 0) |
| return -EINVAL; |
| |
| max_frl_bw_mask = intel_dp_pcon_set_frl_mask(max_frl_bw); |
| drm_dbg(&i915->drm, "MAX_FRL_BW_MASK = %u\n", max_frl_bw_mask); |
| |
| if (intel_dp_pcon_is_frl_trained(intel_dp, max_frl_bw_mask, &frl_trained_mask)) |
| goto frl_trained; |
| |
| ret = drm_dp_pcon_frl_prepare(&intel_dp->aux, false); |
| if (ret < 0) |
| return ret; |
| /* Wait for PCON to be FRL Ready */ |
| wait_for(is_active = drm_dp_pcon_is_frl_ready(&intel_dp->aux) == true, TIMEOUT_FRL_READY_MS); |
| |
| if (!is_active) |
| return -ETIMEDOUT; |
| |
| ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw, |
| DP_PCON_ENABLE_SEQUENTIAL_LINK); |
| if (ret < 0) |
| return ret; |
| ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask, |
| DP_PCON_FRL_LINK_TRAIN_NORMAL); |
| if (ret < 0) |
| return ret; |
| ret = drm_dp_pcon_frl_enable(&intel_dp->aux); |
| if (ret < 0) |
| return ret; |
| /* |
| * Wait for FRL to be completed |
| * Check if the HDMI Link is up and active. |
| */ |
| wait_for(is_active = |
| intel_dp_pcon_is_frl_trained(intel_dp, max_frl_bw_mask, &frl_trained_mask), |
| TIMEOUT_HDMI_LINK_ACTIVE_MS); |
| |
| if (!is_active) |
| return -ETIMEDOUT; |
| |
| frl_trained: |
| drm_dbg(&i915->drm, "FRL_TRAINED_MASK = %u\n", frl_trained_mask); |
| intel_dp->frl.trained_rate_gbps = intel_dp_pcon_get_frl_mask(frl_trained_mask); |
| intel_dp->frl.is_trained = true; |
| drm_dbg(&i915->drm, "FRL trained with : %d Gbps\n", intel_dp->frl.trained_rate_gbps); |
| |
| return 0; |
| } |
| |
| static bool intel_dp_is_hdmi_2_1_sink(struct intel_dp *intel_dp) |
| { |
| if (drm_dp_is_branch(intel_dp->dpcd) && |
| intel_dp_has_hdmi_sink(intel_dp) && |
| intel_dp_hdmi_sink_max_frl(intel_dp) > 0) |
| return true; |
| |
| return false; |
| } |
| |
| static |
| int intel_dp_pcon_set_tmds_mode(struct intel_dp *intel_dp) |
| { |
| int ret; |
| u8 buf = 0; |
| |
| /* Set PCON source control mode */ |
| buf |= DP_PCON_ENABLE_SOURCE_CTL_MODE; |
| |
| ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); |
| if (ret < 0) |
| return ret; |
| |
| /* Set HDMI LINK ENABLE */ |
| buf |= DP_PCON_ENABLE_HDMI_LINK; |
| ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| void intel_dp_check_frl_training(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| |
| /* |
| * Always go for FRL training if: |
| * -PCON supports SRC_CTL_MODE (VESA DP2.0-HDMI2.1 PCON Spec Draft-1 Sec-7) |
| * -sink is HDMI2.1 |
| */ |
| if (!(intel_dp->downstream_ports[2] & DP_PCON_SOURCE_CTL_MODE) || |
| !intel_dp_is_hdmi_2_1_sink(intel_dp) || |
| intel_dp->frl.is_trained) |
| return; |
| |
| if (intel_dp_pcon_start_frl_training(intel_dp) < 0) { |
| int ret, mode; |
| |
| drm_dbg(&dev_priv->drm, "Couldn't set FRL mode, continuing with TMDS mode\n"); |
| ret = intel_dp_pcon_set_tmds_mode(intel_dp); |
| mode = drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, NULL); |
| |
| if (ret < 0 || mode != DP_PCON_HDMI_MODE_TMDS) |
| drm_dbg(&dev_priv->drm, "Issue with PCON, cannot set TMDS mode\n"); |
| } else { |
| drm_dbg(&dev_priv->drm, "FRL training Completed\n"); |
| } |
| } |
| |
| static int |
| intel_dp_pcon_dsc_enc_slice_height(const struct intel_crtc_state *crtc_state) |
| { |
| int vactive = crtc_state->hw.adjusted_mode.vdisplay; |
| |
| return intel_hdmi_dsc_get_slice_height(vactive); |
| } |
| |
| static int |
| intel_dp_pcon_dsc_enc_slices(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_connector *intel_connector = intel_dp->attached_connector; |
| struct drm_connector *connector = &intel_connector->base; |
| int hdmi_throughput = connector->display_info.hdmi.dsc_cap.clk_per_slice; |
| int hdmi_max_slices = connector->display_info.hdmi.dsc_cap.max_slices; |
| int pcon_max_slices = drm_dp_pcon_dsc_max_slices(intel_dp->pcon_dsc_dpcd); |
| int pcon_max_slice_width = drm_dp_pcon_dsc_max_slice_width(intel_dp->pcon_dsc_dpcd); |
| |
| return intel_hdmi_dsc_get_num_slices(crtc_state, pcon_max_slices, |
| pcon_max_slice_width, |
| hdmi_max_slices, hdmi_throughput); |
| } |
| |
| static int |
| intel_dp_pcon_dsc_enc_bpp(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| int num_slices, int slice_width) |
| { |
| struct intel_connector *intel_connector = intel_dp->attached_connector; |
| struct drm_connector *connector = &intel_connector->base; |
| int output_format = crtc_state->output_format; |
| bool hdmi_all_bpp = connector->display_info.hdmi.dsc_cap.all_bpp; |
| int pcon_fractional_bpp = drm_dp_pcon_dsc_bpp_incr(intel_dp->pcon_dsc_dpcd); |
| int hdmi_max_chunk_bytes = |
| connector->display_info.hdmi.dsc_cap.total_chunk_kbytes * 1024; |
| |
| return intel_hdmi_dsc_get_bpp(pcon_fractional_bpp, slice_width, |
| num_slices, output_format, hdmi_all_bpp, |
| hdmi_max_chunk_bytes); |
| } |
| |
| void |
| intel_dp_pcon_dsc_configure(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| u8 pps_param[6]; |
| int slice_height; |
| int slice_width; |
| int num_slices; |
| int bits_per_pixel; |
| int ret; |
| struct intel_connector *intel_connector = intel_dp->attached_connector; |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct drm_connector *connector; |
| bool hdmi_is_dsc_1_2; |
| |
| if (!intel_dp_is_hdmi_2_1_sink(intel_dp)) |
| return; |
| |
| if (!intel_connector) |
| return; |
| connector = &intel_connector->base; |
| hdmi_is_dsc_1_2 = connector->display_info.hdmi.dsc_cap.v_1p2; |
| |
| if (!drm_dp_pcon_enc_is_dsc_1_2(intel_dp->pcon_dsc_dpcd) || |
| !hdmi_is_dsc_1_2) |
| return; |
| |
| slice_height = intel_dp_pcon_dsc_enc_slice_height(crtc_state); |
| if (!slice_height) |
| return; |
| |
| num_slices = intel_dp_pcon_dsc_enc_slices(intel_dp, crtc_state); |
| if (!num_slices) |
| return; |
| |
| slice_width = DIV_ROUND_UP(crtc_state->hw.adjusted_mode.hdisplay, |
| num_slices); |
| |
| bits_per_pixel = intel_dp_pcon_dsc_enc_bpp(intel_dp, crtc_state, |
| num_slices, slice_width); |
| if (!bits_per_pixel) |
| return; |
| |
| pps_param[0] = slice_height & 0xFF; |
| pps_param[1] = slice_height >> 8; |
| pps_param[2] = slice_width & 0xFF; |
| pps_param[3] = slice_width >> 8; |
| pps_param[4] = bits_per_pixel & 0xFF; |
| pps_param[5] = (bits_per_pixel >> 8) & 0x3; |
| |
| ret = drm_dp_pcon_pps_override_param(&intel_dp->aux, pps_param); |
| if (ret < 0) |
| drm_dbg_kms(&i915->drm, "Failed to set pcon DSC\n"); |
| } |
| |
| void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| bool ycbcr444_to_420 = false; |
| bool rgb_to_ycbcr = false; |
| u8 tmp; |
| |
| if (intel_dp->dpcd[DP_DPCD_REV] < 0x13) |
| return; |
| |
| if (!drm_dp_is_branch(intel_dp->dpcd)) |
| return; |
| |
| tmp = intel_dp_has_hdmi_sink(intel_dp) ? DP_HDMI_DVI_OUTPUT_CONFIG : 0; |
| |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, |
| DP_PROTOCOL_CONVERTER_CONTROL_0, tmp) != 1) |
| drm_dbg_kms(&i915->drm, "Failed to %s protocol converter HDMI mode\n", |
| str_enable_disable(intel_dp_has_hdmi_sink(intel_dp))); |
| |
| if (crtc_state->sink_format == INTEL_OUTPUT_FORMAT_YCBCR420) { |
| switch (crtc_state->output_format) { |
| case INTEL_OUTPUT_FORMAT_YCBCR420: |
| break; |
| case INTEL_OUTPUT_FORMAT_YCBCR444: |
| ycbcr444_to_420 = true; |
| break; |
| case INTEL_OUTPUT_FORMAT_RGB: |
| rgb_to_ycbcr = true; |
| ycbcr444_to_420 = true; |
| break; |
| default: |
| MISSING_CASE(crtc_state->output_format); |
| break; |
| } |
| } else if (crtc_state->sink_format == INTEL_OUTPUT_FORMAT_YCBCR444) { |
| switch (crtc_state->output_format) { |
| case INTEL_OUTPUT_FORMAT_YCBCR444: |
| break; |
| case INTEL_OUTPUT_FORMAT_RGB: |
| rgb_to_ycbcr = true; |
| break; |
| default: |
| MISSING_CASE(crtc_state->output_format); |
| break; |
| } |
| } |
| |
| tmp = ycbcr444_to_420 ? DP_CONVERSION_TO_YCBCR420_ENABLE : 0; |
| |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, |
| DP_PROTOCOL_CONVERTER_CONTROL_1, tmp) != 1) |
| drm_dbg_kms(&i915->drm, |
| "Failed to %s protocol converter YCbCr 4:2:0 conversion mode\n", |
| str_enable_disable(intel_dp->dfp.ycbcr_444_to_420)); |
| |
| tmp = rgb_to_ycbcr ? DP_CONVERSION_BT709_RGB_YCBCR_ENABLE : 0; |
| |
| if (drm_dp_pcon_convert_rgb_to_ycbcr(&intel_dp->aux, tmp) < 0) |
| drm_dbg_kms(&i915->drm, |
| "Failed to %s protocol converter RGB->YCbCr conversion mode\n", |
| str_enable_disable(tmp)); |
| } |
| |
| bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp) |
| { |
| u8 dprx = 0; |
| |
| if (drm_dp_dpcd_readb(&intel_dp->aux, DP_DPRX_FEATURE_ENUMERATION_LIST, |
| &dprx) != 1) |
| return false; |
| return dprx & DP_VSC_SDP_EXT_FOR_COLORIMETRY_SUPPORTED; |
| } |
| |
| static void intel_dp_read_dsc_dpcd(struct drm_dp_aux *aux, |
| u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) |
| { |
| if (drm_dp_dpcd_read(aux, DP_DSC_SUPPORT, dsc_dpcd, |
| DP_DSC_RECEIVER_CAP_SIZE) < 0) { |
| drm_err(aux->drm_dev, |
| "Failed to read DPCD register 0x%x\n", |
| DP_DSC_SUPPORT); |
| return; |
| } |
| |
| drm_dbg_kms(aux->drm_dev, "DSC DPCD: %*ph\n", |
| DP_DSC_RECEIVER_CAP_SIZE, |
| dsc_dpcd); |
| } |
| |
| void intel_dp_get_dsc_sink_cap(u8 dpcd_rev, struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| /* |
| * Clear the cached register set to avoid using stale values |
| * for the sinks that do not support DSC. |
| */ |
| memset(connector->dp.dsc_dpcd, 0, sizeof(connector->dp.dsc_dpcd)); |
| |
| /* Clear fec_capable to avoid using stale values */ |
| connector->dp.fec_capability = 0; |
| |
| if (dpcd_rev < DP_DPCD_REV_14) |
| return; |
| |
| intel_dp_read_dsc_dpcd(connector->dp.dsc_decompression_aux, |
| connector->dp.dsc_dpcd); |
| |
| if (drm_dp_dpcd_readb(connector->dp.dsc_decompression_aux, DP_FEC_CAPABILITY, |
| &connector->dp.fec_capability) < 0) { |
| drm_err(&i915->drm, "Failed to read FEC DPCD register\n"); |
| return; |
| } |
| |
| drm_dbg_kms(&i915->drm, "FEC CAPABILITY: %x\n", |
| connector->dp.fec_capability); |
| } |
| |
| static void intel_edp_get_dsc_sink_cap(u8 edp_dpcd_rev, struct intel_connector *connector) |
| { |
| if (edp_dpcd_rev < DP_EDP_14) |
| return; |
| |
| intel_dp_read_dsc_dpcd(connector->dp.dsc_decompression_aux, connector->dp.dsc_dpcd); |
| } |
| |
| static void intel_edp_mso_mode_fixup(struct intel_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| struct intel_dp *intel_dp = intel_attached_dp(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| int n = intel_dp->mso_link_count; |
| int overlap = intel_dp->mso_pixel_overlap; |
| |
| if (!mode || !n) |
| return; |
| |
| mode->hdisplay = (mode->hdisplay - overlap) * n; |
| mode->hsync_start = (mode->hsync_start - overlap) * n; |
| mode->hsync_end = (mode->hsync_end - overlap) * n; |
| mode->htotal = (mode->htotal - overlap) * n; |
| mode->clock *= n; |
| |
| drm_mode_set_name(mode); |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] using generated MSO mode: " DRM_MODE_FMT "\n", |
| connector->base.base.id, connector->base.name, |
| DRM_MODE_ARG(mode)); |
| } |
| |
| void intel_edp_fixup_vbt_bpp(struct intel_encoder *encoder, int pipe_bpp) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct intel_connector *connector = intel_dp->attached_connector; |
| |
| if (connector->panel.vbt.edp.bpp && pipe_bpp > connector->panel.vbt.edp.bpp) { |
| /* |
| * This is a big fat ugly hack. |
| * |
| * Some machines in UEFI boot mode provide us a VBT that has 18 |
| * bpp and 1.62 GHz link bandwidth for eDP, which for reasons |
| * unknown we fail to light up. Yet the same BIOS boots up with |
| * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as |
| * max, not what it tells us to use. |
| * |
| * Note: This will still be broken if the eDP panel is not lit |
| * up by the BIOS, and thus we can't get the mode at module |
| * load. |
| */ |
| drm_dbg_kms(&dev_priv->drm, |
| "pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", |
| pipe_bpp, connector->panel.vbt.edp.bpp); |
| connector->panel.vbt.edp.bpp = pipe_bpp; |
| } |
| } |
| |
| static void intel_edp_mso_init(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct intel_connector *connector = intel_dp->attached_connector; |
| struct drm_display_info *info = &connector->base.display_info; |
| u8 mso; |
| |
| if (intel_dp->edp_dpcd[0] < DP_EDP_14) |
| return; |
| |
| if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_MSO_LINK_CAPABILITIES, &mso) != 1) { |
| drm_err(&i915->drm, "Failed to read MSO cap\n"); |
| return; |
| } |
| |
| /* Valid configurations are SST or MSO 2x1, 2x2, 4x1 */ |
| mso &= DP_EDP_MSO_NUMBER_OF_LINKS_MASK; |
| if (mso % 2 || mso > drm_dp_max_lane_count(intel_dp->dpcd)) { |
| drm_err(&i915->drm, "Invalid MSO link count cap %u\n", mso); |
| mso = 0; |
| } |
| |
| if (mso) { |
| drm_dbg_kms(&i915->drm, "Sink MSO %ux%u configuration, pixel overlap %u\n", |
| mso, drm_dp_max_lane_count(intel_dp->dpcd) / mso, |
| info->mso_pixel_overlap); |
| if (!HAS_MSO(i915)) { |
| drm_err(&i915->drm, "No source MSO support, disabling\n"); |
| mso = 0; |
| } |
| } |
| |
| intel_dp->mso_link_count = mso; |
| intel_dp->mso_pixel_overlap = mso ? info->mso_pixel_overlap : 0; |
| } |
| |
| static bool |
| intel_edp_init_dpcd(struct intel_dp *intel_dp, struct intel_connector *connector) |
| { |
| struct drm_i915_private *dev_priv = |
| to_i915(dp_to_dig_port(intel_dp)->base.base.dev); |
| |
| /* this function is meant to be called only once */ |
| drm_WARN_ON(&dev_priv->drm, intel_dp->dpcd[DP_DPCD_REV] != 0); |
| |
| if (drm_dp_read_dpcd_caps(&intel_dp->aux, intel_dp->dpcd) != 0) |
| return false; |
| |
| drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc, |
| drm_dp_is_branch(intel_dp->dpcd)); |
| intel_init_dpcd_quirks(intel_dp, &intel_dp->desc.ident); |
| |
| intel_dp->colorimetry_support = |
| intel_dp_get_colorimetry_status(intel_dp); |
| |
| /* |
| * Read the eDP display control registers. |
| * |
| * Do this independent of DP_DPCD_DISPLAY_CONTROL_CAPABLE bit in |
| * DP_EDP_CONFIGURATION_CAP, because some buggy displays do not have it |
| * set, but require eDP 1.4+ detection (e.g. for supported link rates |
| * method). The display control registers should read zero if they're |
| * not supported anyway. |
| */ |
| if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV, |
| intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd)) == |
| sizeof(intel_dp->edp_dpcd)) { |
| drm_dbg_kms(&dev_priv->drm, "eDP DPCD: %*ph\n", |
| (int)sizeof(intel_dp->edp_dpcd), |
| intel_dp->edp_dpcd); |
| |
| intel_dp->use_max_params = intel_dp->edp_dpcd[0] < DP_EDP_14; |
| } |
| |
| /* |
| * This has to be called after intel_dp->edp_dpcd is filled, PSR checks |
| * for SET_POWER_CAPABLE bit in intel_dp->edp_dpcd[1] |
| */ |
| intel_psr_init_dpcd(intel_dp); |
| |
| /* Clear the default sink rates */ |
| intel_dp->num_sink_rates = 0; |
| |
| /* Read the eDP 1.4+ supported link rates. */ |
| if (intel_dp->edp_dpcd[0] >= DP_EDP_14) { |
| __le16 sink_rates[DP_MAX_SUPPORTED_RATES]; |
| int i; |
| |
| drm_dp_dpcd_read(&intel_dp->aux, DP_SUPPORTED_LINK_RATES, |
| sink_rates, sizeof(sink_rates)); |
| |
| for (i = 0; i < ARRAY_SIZE(sink_rates); i++) { |
| int val = le16_to_cpu(sink_rates[i]); |
| |
| if (val == 0) |
| break; |
| |
| /* Value read multiplied by 200kHz gives the per-lane |
| * link rate in kHz. The source rates are, however, |
| * stored in terms of LS_Clk kHz. The full conversion |
| * back to symbols is |
| * (val * 200kHz)*(8/10 ch. encoding)*(1/8 bit to Byte) |
| */ |
| intel_dp->sink_rates[i] = (val * 200) / 10; |
| } |
| intel_dp->num_sink_rates = i; |
| } |
| |
| /* |
| * Use DP_LINK_RATE_SET if DP_SUPPORTED_LINK_RATES are available, |
| * default to DP_MAX_LINK_RATE and DP_LINK_BW_SET otherwise. |
| */ |
| if (intel_dp->num_sink_rates) |
| intel_dp->use_rate_select = true; |
| else |
| intel_dp_set_sink_rates(intel_dp); |
| intel_dp_set_max_sink_lane_count(intel_dp); |
| |
| /* Read the eDP DSC DPCD registers */ |
| if (HAS_DSC(dev_priv)) |
| intel_edp_get_dsc_sink_cap(intel_dp->edp_dpcd[0], |
| connector); |
| |
| /* |
| * If needed, program our source OUI so we can make various Intel-specific AUX services |
| * available (such as HDR backlight controls) |
| */ |
| intel_edp_init_source_oui(intel_dp, true); |
| |
| return true; |
| } |
| |
| static bool |
| intel_dp_has_sink_count(struct intel_dp *intel_dp) |
| { |
| if (!intel_dp->attached_connector) |
| return false; |
| |
| return drm_dp_read_sink_count_cap(&intel_dp->attached_connector->base, |
| intel_dp->dpcd, |
| &intel_dp->desc); |
| } |
| |
| void intel_dp_update_sink_caps(struct intel_dp *intel_dp) |
| { |
| intel_dp_set_sink_rates(intel_dp); |
| intel_dp_set_max_sink_lane_count(intel_dp); |
| intel_dp_set_common_rates(intel_dp); |
| } |
| |
| static bool |
| intel_dp_get_dpcd(struct intel_dp *intel_dp) |
| { |
| int ret; |
| |
| if (intel_dp_init_lttpr_and_dprx_caps(intel_dp) < 0) |
| return false; |
| |
| /* |
| * Don't clobber cached eDP rates. Also skip re-reading |
| * the OUI/ID since we know it won't change. |
| */ |
| if (!intel_dp_is_edp(intel_dp)) { |
| drm_dp_read_desc(&intel_dp->aux, &intel_dp->desc, |
| drm_dp_is_branch(intel_dp->dpcd)); |
| |
| intel_init_dpcd_quirks(intel_dp, &intel_dp->desc.ident); |
| |
| intel_dp->colorimetry_support = |
| intel_dp_get_colorimetry_status(intel_dp); |
| |
| intel_dp_update_sink_caps(intel_dp); |
| } |
| |
| if (intel_dp_has_sink_count(intel_dp)) { |
| ret = drm_dp_read_sink_count(&intel_dp->aux); |
| if (ret < 0) |
| return false; |
| |
| /* |
| * Sink count can change between short pulse hpd hence |
| * a member variable in intel_dp will track any changes |
| * between short pulse interrupts. |
| */ |
| intel_dp->sink_count = ret; |
| |
| /* |
| * SINK_COUNT == 0 and DOWNSTREAM_PORT_PRESENT == 1 implies that |
| * a dongle is present but no display. Unless we require to know |
| * if a dongle is present or not, we don't need to update |
| * downstream port information. So, an early return here saves |
| * time from performing other operations which are not required. |
| */ |
| if (!intel_dp->sink_count) |
| return false; |
| } |
| |
| return drm_dp_read_downstream_info(&intel_dp->aux, intel_dp->dpcd, |
| intel_dp->downstream_ports) == 0; |
| } |
| |
| static const char *intel_dp_mst_mode_str(enum drm_dp_mst_mode mst_mode) |
| { |
| if (mst_mode == DRM_DP_MST) |
| return "MST"; |
| else if (mst_mode == DRM_DP_SST_SIDEBAND_MSG) |
| return "SST w/ sideband messaging"; |
| else |
| return "SST"; |
| } |
| |
| static enum drm_dp_mst_mode |
| intel_dp_mst_mode_choose(struct intel_dp *intel_dp, |
| enum drm_dp_mst_mode sink_mst_mode) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| if (!i915->display.params.enable_dp_mst) |
| return DRM_DP_SST; |
| |
| if (!intel_dp_mst_source_support(intel_dp)) |
| return DRM_DP_SST; |
| |
| if (sink_mst_mode == DRM_DP_SST_SIDEBAND_MSG && |
| !(intel_dp->dpcd[DP_MAIN_LINK_CHANNEL_CODING] & DP_CAP_ANSI_128B132B)) |
| return DRM_DP_SST; |
| |
| return sink_mst_mode; |
| } |
| |
| static enum drm_dp_mst_mode |
| intel_dp_mst_detect(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| enum drm_dp_mst_mode sink_mst_mode; |
| enum drm_dp_mst_mode mst_detect; |
| |
| sink_mst_mode = drm_dp_read_mst_cap(&intel_dp->aux, intel_dp->dpcd); |
| |
| mst_detect = intel_dp_mst_mode_choose(intel_dp, sink_mst_mode); |
| |
| drm_dbg_kms(&i915->drm, |
| "[ENCODER:%d:%s] MST support: port: %s, sink: %s, modparam: %s -> enable: %s\n", |
| encoder->base.base.id, encoder->base.name, |
| str_yes_no(intel_dp_mst_source_support(intel_dp)), |
| intel_dp_mst_mode_str(sink_mst_mode), |
| str_yes_no(i915->display.params.enable_dp_mst), |
| intel_dp_mst_mode_str(mst_detect)); |
| |
| return mst_detect; |
| } |
| |
| static void |
| intel_dp_mst_configure(struct intel_dp *intel_dp) |
| { |
| if (!intel_dp_mst_source_support(intel_dp)) |
| return; |
| |
| intel_dp->is_mst = intel_dp->mst_detect != DRM_DP_SST; |
| |
| if (intel_dp->is_mst) |
| intel_dp_mst_prepare_probe(intel_dp); |
| |
| drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst); |
| |
| /* Avoid stale info on the next detect cycle. */ |
| intel_dp->mst_detect = DRM_DP_SST; |
| } |
| |
| static void |
| intel_dp_mst_disconnect(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| if (!intel_dp->is_mst) |
| return; |
| |
| drm_dbg_kms(&i915->drm, "MST device may have disappeared %d vs %d\n", |
| intel_dp->is_mst, intel_dp->mst_mgr.mst_state); |
| intel_dp->is_mst = false; |
| drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, intel_dp->is_mst); |
| } |
| |
| static bool |
| intel_dp_get_sink_irq_esi(struct intel_dp *intel_dp, u8 *esi) |
| { |
| return drm_dp_dpcd_read(&intel_dp->aux, DP_SINK_COUNT_ESI, esi, 4) == 4; |
| } |
| |
| static bool intel_dp_ack_sink_irq_esi(struct intel_dp *intel_dp, u8 esi[4]) |
| { |
| int retry; |
| |
| for (retry = 0; retry < 3; retry++) { |
| if (drm_dp_dpcd_write(&intel_dp->aux, DP_SINK_COUNT_ESI + 1, |
| &esi[1], 3) == 3) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| bool |
| intel_dp_needs_vsc_sdp(const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| /* |
| * As per DP 1.4a spec section 2.2.4.3 [MSA Field for Indication |
| * of Color Encoding Format and Content Color Gamut], in order to |
| * sending YCBCR 420 or HDR BT.2020 signals we should use DP VSC SDP. |
| */ |
| if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) |
| return true; |
| |
| switch (conn_state->colorspace) { |
| case DRM_MODE_COLORIMETRY_SYCC_601: |
| case DRM_MODE_COLORIMETRY_OPYCC_601: |
| case DRM_MODE_COLORIMETRY_BT2020_YCC: |
| case DRM_MODE_COLORIMETRY_BT2020_RGB: |
| case DRM_MODE_COLORIMETRY_BT2020_CYCC: |
| return true; |
| default: |
| break; |
| } |
| |
| return false; |
| } |
| |
| static ssize_t intel_dp_as_sdp_pack(const struct drm_dp_as_sdp *as_sdp, |
| struct dp_sdp *sdp, size_t size) |
| { |
| size_t length = sizeof(struct dp_sdp); |
| |
| if (size < length) |
| return -ENOSPC; |
| |
| memset(sdp, 0, size); |
| |
| /* Prepare AS (Adaptive Sync) SDP Header */ |
| sdp->sdp_header.HB0 = 0; |
| sdp->sdp_header.HB1 = as_sdp->sdp_type; |
| sdp->sdp_header.HB2 = 0x02; |
| sdp->sdp_header.HB3 = as_sdp->length; |
| |
| /* Fill AS (Adaptive Sync) SDP Payload */ |
| sdp->db[0] = as_sdp->mode; |
| sdp->db[1] = as_sdp->vtotal & 0xFF; |
| sdp->db[2] = (as_sdp->vtotal >> 8) & 0xFF; |
| sdp->db[3] = as_sdp->target_rr & 0xFF; |
| sdp->db[4] = (as_sdp->target_rr >> 8) & 0x3; |
| |
| if (as_sdp->target_rr_divider) |
| sdp->db[4] |= 0x20; |
| |
| return length; |
| } |
| |
| static ssize_t |
| intel_dp_hdr_metadata_infoframe_sdp_pack(struct drm_i915_private *i915, |
| const struct hdmi_drm_infoframe *drm_infoframe, |
| struct dp_sdp *sdp, |
| size_t size) |
| { |
| size_t length = sizeof(struct dp_sdp); |
| const int infoframe_size = HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE; |
| unsigned char buf[HDMI_INFOFRAME_HEADER_SIZE + HDMI_DRM_INFOFRAME_SIZE]; |
| ssize_t len; |
| |
| if (size < length) |
| return -ENOSPC; |
| |
| memset(sdp, 0, size); |
| |
| len = hdmi_drm_infoframe_pack_only(drm_infoframe, buf, sizeof(buf)); |
| if (len < 0) { |
| drm_dbg_kms(&i915->drm, "buffer size is smaller than hdr metadata infoframe\n"); |
| return -ENOSPC; |
| } |
| |
| if (len != infoframe_size) { |
| drm_dbg_kms(&i915->drm, "wrong static hdr metadata size\n"); |
| return -ENOSPC; |
| } |
| |
| /* |
| * Set up the infoframe sdp packet for HDR static metadata. |
| * Prepare VSC Header for SU as per DP 1.4a spec, |
| * Table 2-100 and Table 2-101 |
| */ |
| |
| /* Secondary-Data Packet ID, 00h for non-Audio INFOFRAME */ |
| sdp->sdp_header.HB0 = 0; |
| /* |
| * Packet Type 80h + Non-audio INFOFRAME Type value |
| * HDMI_INFOFRAME_TYPE_DRM: 0x87 |
| * - 80h + Non-audio INFOFRAME Type value |
| * - InfoFrame Type: 0x07 |
| * [CTA-861-G Table-42 Dynamic Range and Mastering InfoFrame] |
| */ |
| sdp->sdp_header.HB1 = drm_infoframe->type; |
| /* |
| * Least Significant Eight Bits of (Data Byte Count – 1) |
| * infoframe_size - 1 |
| */ |
| sdp->sdp_header.HB2 = 0x1D; |
| /* INFOFRAME SDP Version Number */ |
| sdp->sdp_header.HB3 = (0x13 << 2); |
| /* CTA Header Byte 2 (INFOFRAME Version Number) */ |
| sdp->db[0] = drm_infoframe->version; |
| /* CTA Header Byte 3 (Length of INFOFRAME): HDMI_DRM_INFOFRAME_SIZE */ |
| sdp->db[1] = drm_infoframe->length; |
| /* |
| * Copy HDMI_DRM_INFOFRAME_SIZE size from a buffer after |
| * HDMI_INFOFRAME_HEADER_SIZE |
| */ |
| BUILD_BUG_ON(sizeof(sdp->db) < HDMI_DRM_INFOFRAME_SIZE + 2); |
| memcpy(&sdp->db[2], &buf[HDMI_INFOFRAME_HEADER_SIZE], |
| HDMI_DRM_INFOFRAME_SIZE); |
| |
| /* |
| * Size of DP infoframe sdp packet for HDR static metadata consists of |
| * - DP SDP Header(struct dp_sdp_header): 4 bytes |
| * - Two Data Blocks: 2 bytes |
| * CTA Header Byte2 (INFOFRAME Version Number) |
| * CTA Header Byte3 (Length of INFOFRAME) |
| * - HDMI_DRM_INFOFRAME_SIZE: 26 bytes |
| * |
| * Prior to GEN11's GMP register size is identical to DP HDR static metadata |
| * infoframe size. But GEN11+ has larger than that size, write_infoframe |
| * will pad rest of the size. |
| */ |
| return sizeof(struct dp_sdp_header) + 2 + HDMI_DRM_INFOFRAME_SIZE; |
| } |
| |
| static void intel_write_dp_sdp(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| unsigned int type) |
| { |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct dp_sdp sdp = {}; |
| ssize_t len; |
| |
| if ((crtc_state->infoframes.enable & |
| intel_hdmi_infoframe_enable(type)) == 0) |
| return; |
| |
| switch (type) { |
| case DP_SDP_VSC: |
| len = drm_dp_vsc_sdp_pack(&crtc_state->infoframes.vsc, &sdp); |
| break; |
| case HDMI_PACKET_TYPE_GAMUT_METADATA: |
| len = intel_dp_hdr_metadata_infoframe_sdp_pack(dev_priv, |
| &crtc_state->infoframes.drm.drm, |
| &sdp, sizeof(sdp)); |
| break; |
| case DP_SDP_ADAPTIVE_SYNC: |
| len = intel_dp_as_sdp_pack(&crtc_state->infoframes.as_sdp, &sdp, |
| sizeof(sdp)); |
| break; |
| default: |
| MISSING_CASE(type); |
| return; |
| } |
| |
| if (drm_WARN_ON(&dev_priv->drm, len < 0)) |
| return; |
| |
| dig_port->write_infoframe(encoder, crtc_state, type, &sdp, len); |
| } |
| |
| void intel_dp_set_infoframes(struct intel_encoder *encoder, |
| bool enable, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| i915_reg_t reg = HSW_TVIDEO_DIP_CTL(dev_priv, |
| crtc_state->cpu_transcoder); |
| u32 dip_enable = VIDEO_DIP_ENABLE_AVI_HSW | VIDEO_DIP_ENABLE_GCP_HSW | |
| VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW | |
| VIDEO_DIP_ENABLE_SPD_HSW | VIDEO_DIP_ENABLE_DRM_GLK; |
| |
| if (HAS_AS_SDP(dev_priv)) |
| dip_enable |= VIDEO_DIP_ENABLE_AS_ADL; |
| |
| u32 val = intel_de_read(dev_priv, reg) & ~dip_enable; |
| |
| /* TODO: Sanitize DSC enabling wrt. intel_dsc_dp_pps_write(). */ |
| if (!enable && HAS_DSC(dev_priv)) |
| val &= ~VDIP_ENABLE_PPS; |
| |
| /* |
| * This routine disables VSC DIP if the function is called |
| * to disable SDP or if it does not have PSR |
| */ |
| if (!enable || !crtc_state->has_psr) |
| val &= ~VIDEO_DIP_ENABLE_VSC_HSW; |
| |
| intel_de_write(dev_priv, reg, val); |
| intel_de_posting_read(dev_priv, reg); |
| |
| if (!enable) |
| return; |
| |
| intel_write_dp_sdp(encoder, crtc_state, DP_SDP_VSC); |
| intel_write_dp_sdp(encoder, crtc_state, DP_SDP_ADAPTIVE_SYNC); |
| |
| intel_write_dp_sdp(encoder, crtc_state, HDMI_PACKET_TYPE_GAMUT_METADATA); |
| } |
| |
| static |
| int intel_dp_as_sdp_unpack(struct drm_dp_as_sdp *as_sdp, |
| const void *buffer, size_t size) |
| { |
| const struct dp_sdp *sdp = buffer; |
| |
| if (size < sizeof(struct dp_sdp)) |
| return -EINVAL; |
| |
| memset(as_sdp, 0, sizeof(*as_sdp)); |
| |
| if (sdp->sdp_header.HB0 != 0) |
| return -EINVAL; |
| |
| if (sdp->sdp_header.HB1 != DP_SDP_ADAPTIVE_SYNC) |
| return -EINVAL; |
| |
| if (sdp->sdp_header.HB2 != 0x02) |
| return -EINVAL; |
| |
| if ((sdp->sdp_header.HB3 & 0x3F) != 9) |
| return -EINVAL; |
| |
| as_sdp->length = sdp->sdp_header.HB3 & DP_ADAPTIVE_SYNC_SDP_LENGTH; |
| as_sdp->mode = sdp->db[0] & DP_ADAPTIVE_SYNC_SDP_OPERATION_MODE; |
| as_sdp->vtotal = (sdp->db[2] << 8) | sdp->db[1]; |
| as_sdp->target_rr = (u64)sdp->db[3] | ((u64)sdp->db[4] & 0x3); |
| as_sdp->target_rr_divider = sdp->db[4] & 0x20 ? true : false; |
| |
| return 0; |
| } |
| |
| static int intel_dp_vsc_sdp_unpack(struct drm_dp_vsc_sdp *vsc, |
| const void *buffer, size_t size) |
| { |
| const struct dp_sdp *sdp = buffer; |
| |
| if (size < sizeof(struct dp_sdp)) |
| return -EINVAL; |
| |
| memset(vsc, 0, sizeof(*vsc)); |
| |
| if (sdp->sdp_header.HB0 != 0) |
| return -EINVAL; |
| |
| if (sdp->sdp_header.HB1 != DP_SDP_VSC) |
| return -EINVAL; |
| |
| vsc->sdp_type = sdp->sdp_header.HB1; |
| vsc->revision = sdp->sdp_header.HB2; |
| vsc->length = sdp->sdp_header.HB3; |
| |
| if ((sdp->sdp_header.HB2 == 0x2 && sdp->sdp_header.HB3 == 0x8) || |
| (sdp->sdp_header.HB2 == 0x4 && sdp->sdp_header.HB3 == 0xe) || |
| (sdp->sdp_header.HB2 == 0x6 && sdp->sdp_header.HB3 == 0x10)) { |
| /* |
| * - HB2 = 0x2, HB3 = 0x8 |
| * VSC SDP supporting 3D stereo + PSR |
| * - HB2 = 0x4, HB3 = 0xe |
| * VSC SDP supporting 3D stereo + PSR2 with Y-coordinate of |
| * first scan line of the SU region (applies to eDP v1.4b |
| * and higher). |
| * - HB2 = 0x6, HB3 = 0x10 |
| * VSC SDP supporting 3D stereo + Panel Replay. |
| */ |
| return 0; |
| } else if (sdp->sdp_header.HB2 == 0x5 && sdp->sdp_header.HB3 == 0x13) { |
| /* |
| * - HB2 = 0x5, HB3 = 0x13 |
| * VSC SDP supporting 3D stereo + PSR2 + Pixel Encoding/Colorimetry |
| * Format. |
| */ |
| vsc->pixelformat = (sdp->db[16] >> 4) & 0xf; |
| vsc->colorimetry = sdp->db[16] & 0xf; |
| vsc->dynamic_range = (sdp->db[17] >> 7) & 0x1; |
| |
| switch (sdp->db[17] & 0x7) { |
| case 0x0: |
| vsc->bpc = 6; |
| break; |
| case 0x1: |
| vsc->bpc = 8; |
| break; |
| case 0x2: |
| vsc->bpc = 10; |
| break; |
| case 0x3: |
| vsc->bpc = 12; |
| break; |
| case 0x4: |
| vsc->bpc = 16; |
| break; |
| default: |
| MISSING_CASE(sdp->db[17] & 0x7); |
| return -EINVAL; |
| } |
| |
| vsc->content_type = sdp->db[18] & 0x7; |
| } else { |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void |
| intel_read_dp_as_sdp(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| struct drm_dp_as_sdp *as_sdp) |
| { |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| unsigned int type = DP_SDP_ADAPTIVE_SYNC; |
| struct dp_sdp sdp = {}; |
| int ret; |
| |
| if ((crtc_state->infoframes.enable & |
| intel_hdmi_infoframe_enable(type)) == 0) |
| return; |
| |
| dig_port->read_infoframe(encoder, crtc_state, type, &sdp, |
| sizeof(sdp)); |
| |
| ret = intel_dp_as_sdp_unpack(as_sdp, &sdp, sizeof(sdp)); |
| if (ret) |
| drm_dbg_kms(&dev_priv->drm, "Failed to unpack DP AS SDP\n"); |
| } |
| |
| static int |
| intel_dp_hdr_metadata_infoframe_sdp_unpack(struct hdmi_drm_infoframe *drm_infoframe, |
| const void *buffer, size_t size) |
| { |
| int ret; |
| |
| const struct dp_sdp *sdp = buffer; |
| |
| if (size < sizeof(struct dp_sdp)) |
| return -EINVAL; |
| |
| if (sdp->sdp_header.HB0 != 0) |
| return -EINVAL; |
| |
| if (sdp->sdp_header.HB1 != HDMI_INFOFRAME_TYPE_DRM) |
| return -EINVAL; |
| |
| /* |
| * Least Significant Eight Bits of (Data Byte Count – 1) |
| * 1Dh (i.e., Data Byte Count = 30 bytes). |
| */ |
| if (sdp->sdp_header.HB2 != 0x1D) |
| return -EINVAL; |
| |
| /* Most Significant Two Bits of (Data Byte Count – 1), Clear to 00b. */ |
| if ((sdp->sdp_header.HB3 & 0x3) != 0) |
| return -EINVAL; |
| |
| /* INFOFRAME SDP Version Number */ |
| if (((sdp->sdp_header.HB3 >> 2) & 0x3f) != 0x13) |
| return -EINVAL; |
| |
| /* CTA Header Byte 2 (INFOFRAME Version Number) */ |
| if (sdp->db[0] != 1) |
| return -EINVAL; |
| |
| /* CTA Header Byte 3 (Length of INFOFRAME): HDMI_DRM_INFOFRAME_SIZE */ |
| if (sdp->db[1] != HDMI_DRM_INFOFRAME_SIZE) |
| return -EINVAL; |
| |
| ret = hdmi_drm_infoframe_unpack_only(drm_infoframe, &sdp->db[2], |
| HDMI_DRM_INFOFRAME_SIZE); |
| |
| return ret; |
| } |
| |
| static void intel_read_dp_vsc_sdp(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| struct drm_dp_vsc_sdp *vsc) |
| { |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| unsigned int type = DP_SDP_VSC; |
| struct dp_sdp sdp = {}; |
| int ret; |
| |
| if ((crtc_state->infoframes.enable & |
| intel_hdmi_infoframe_enable(type)) == 0) |
| return; |
| |
| dig_port->read_infoframe(encoder, crtc_state, type, &sdp, sizeof(sdp)); |
| |
| ret = intel_dp_vsc_sdp_unpack(vsc, &sdp, sizeof(sdp)); |
| |
| if (ret) |
| drm_dbg_kms(&dev_priv->drm, "Failed to unpack DP VSC SDP\n"); |
| } |
| |
| static void intel_read_dp_hdr_metadata_infoframe_sdp(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| struct hdmi_drm_infoframe *drm_infoframe) |
| { |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| unsigned int type = HDMI_PACKET_TYPE_GAMUT_METADATA; |
| struct dp_sdp sdp = {}; |
| int ret; |
| |
| if ((crtc_state->infoframes.enable & |
| intel_hdmi_infoframe_enable(type)) == 0) |
| return; |
| |
| dig_port->read_infoframe(encoder, crtc_state, type, &sdp, |
| sizeof(sdp)); |
| |
| ret = intel_dp_hdr_metadata_infoframe_sdp_unpack(drm_infoframe, &sdp, |
| sizeof(sdp)); |
| |
| if (ret) |
| drm_dbg_kms(&dev_priv->drm, |
| "Failed to unpack DP HDR Metadata Infoframe SDP\n"); |
| } |
| |
| void intel_read_dp_sdp(struct intel_encoder *encoder, |
| struct intel_crtc_state *crtc_state, |
| unsigned int type) |
| { |
| switch (type) { |
| case DP_SDP_VSC: |
| intel_read_dp_vsc_sdp(encoder, crtc_state, |
| &crtc_state->infoframes.vsc); |
| break; |
| case HDMI_PACKET_TYPE_GAMUT_METADATA: |
| intel_read_dp_hdr_metadata_infoframe_sdp(encoder, crtc_state, |
| &crtc_state->infoframes.drm.drm); |
| break; |
| case DP_SDP_ADAPTIVE_SYNC: |
| intel_read_dp_as_sdp(encoder, crtc_state, |
| &crtc_state->infoframes.as_sdp); |
| break; |
| default: |
| MISSING_CASE(type); |
| break; |
| } |
| } |
| |
| static u8 intel_dp_autotest_link_training(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| int status = 0; |
| int test_link_rate; |
| u8 test_lane_count, test_link_bw; |
| /* (DP CTS 1.2) |
| * 4.3.1.11 |
| */ |
| /* Read the TEST_LANE_COUNT and TEST_LINK_RTAE fields (DP CTS 3.1.4) */ |
| status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LANE_COUNT, |
| &test_lane_count); |
| |
| if (status <= 0) { |
| drm_dbg_kms(&i915->drm, "Lane count read failed\n"); |
| return DP_TEST_NAK; |
| } |
| test_lane_count &= DP_MAX_LANE_COUNT_MASK; |
| |
| status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_LINK_RATE, |
| &test_link_bw); |
| if (status <= 0) { |
| drm_dbg_kms(&i915->drm, "Link Rate read failed\n"); |
| return DP_TEST_NAK; |
| } |
| test_link_rate = drm_dp_bw_code_to_link_rate(test_link_bw); |
| |
| /* Validate the requested link rate and lane count */ |
| if (!intel_dp_link_params_valid(intel_dp, test_link_rate, |
| test_lane_count)) |
| return DP_TEST_NAK; |
| |
| intel_dp->compliance.test_lane_count = test_lane_count; |
| intel_dp->compliance.test_link_rate = test_link_rate; |
| |
| return DP_TEST_ACK; |
| } |
| |
| static u8 intel_dp_autotest_video_pattern(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| u8 test_pattern; |
| u8 test_misc; |
| __be16 h_width, v_height; |
| int status = 0; |
| |
| /* Read the TEST_PATTERN (DP CTS 3.1.5) */ |
| status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_PATTERN, |
| &test_pattern); |
| if (status <= 0) { |
| drm_dbg_kms(&i915->drm, "Test pattern read failed\n"); |
| return DP_TEST_NAK; |
| } |
| if (test_pattern != DP_COLOR_RAMP) |
| return DP_TEST_NAK; |
| |
| status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_H_WIDTH_HI, |
| &h_width, 2); |
| if (status <= 0) { |
| drm_dbg_kms(&i915->drm, "H Width read failed\n"); |
| return DP_TEST_NAK; |
| } |
| |
| status = drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_V_HEIGHT_HI, |
| &v_height, 2); |
| if (status <= 0) { |
| drm_dbg_kms(&i915->drm, "V Height read failed\n"); |
| return DP_TEST_NAK; |
| } |
| |
| status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_MISC0, |
| &test_misc); |
| if (status <= 0) { |
| drm_dbg_kms(&i915->drm, "TEST MISC read failed\n"); |
| return DP_TEST_NAK; |
| } |
| if ((test_misc & DP_TEST_COLOR_FORMAT_MASK) != DP_COLOR_FORMAT_RGB) |
| return DP_TEST_NAK; |
| if (test_misc & DP_TEST_DYNAMIC_RANGE_CEA) |
| return DP_TEST_NAK; |
| switch (test_misc & DP_TEST_BIT_DEPTH_MASK) { |
| case DP_TEST_BIT_DEPTH_6: |
| intel_dp->compliance.test_data.bpc = 6; |
| break; |
| case DP_TEST_BIT_DEPTH_8: |
| intel_dp->compliance.test_data.bpc = 8; |
| break; |
| default: |
| return DP_TEST_NAK; |
| } |
| |
| intel_dp->compliance.test_data.video_pattern = test_pattern; |
| intel_dp->compliance.test_data.hdisplay = be16_to_cpu(h_width); |
| intel_dp->compliance.test_data.vdisplay = be16_to_cpu(v_height); |
| /* Set test active flag here so userspace doesn't interrupt things */ |
| intel_dp->compliance.test_active = true; |
| |
| return DP_TEST_ACK; |
| } |
| |
| static u8 intel_dp_autotest_edid(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| u8 test_result = DP_TEST_ACK; |
| struct intel_connector *intel_connector = intel_dp->attached_connector; |
| struct drm_connector *connector = &intel_connector->base; |
| |
| if (intel_connector->detect_edid == NULL || |
| connector->edid_corrupt || |
| intel_dp->aux.i2c_defer_count > 6) { |
| /* Check EDID read for NACKs, DEFERs and corruption |
| * (DP CTS 1.2 Core r1.1) |
| * 4.2.2.4 : Failed EDID read, I2C_NAK |
| * 4.2.2.5 : Failed EDID read, I2C_DEFER |
| * 4.2.2.6 : EDID corruption detected |
| * Use failsafe mode for all cases |
| */ |
| if (intel_dp->aux.i2c_nack_count > 0 || |
| intel_dp->aux.i2c_defer_count > 0) |
| drm_dbg_kms(&i915->drm, |
| "EDID read had %d NACKs, %d DEFERs\n", |
| intel_dp->aux.i2c_nack_count, |
| intel_dp->aux.i2c_defer_count); |
| intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_FAILSAFE; |
| } else { |
| /* FIXME: Get rid of drm_edid_raw() */ |
| const struct edid *block = drm_edid_raw(intel_connector->detect_edid); |
| |
| /* We have to write the checksum of the last block read */ |
| block += block->extensions; |
| |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_EDID_CHECKSUM, |
| block->checksum) <= 0) |
| drm_dbg_kms(&i915->drm, |
| "Failed to write EDID checksum\n"); |
| |
| test_result = DP_TEST_ACK | DP_TEST_EDID_CHECKSUM_WRITE; |
| intel_dp->compliance.test_data.edid = INTEL_DP_RESOLUTION_PREFERRED; |
| } |
| |
| /* Set test active flag here so userspace doesn't interrupt things */ |
| intel_dp->compliance.test_active = true; |
| |
| return test_result; |
| } |
| |
| static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *dev_priv = |
| to_i915(dp_to_dig_port(intel_dp)->base.base.dev); |
| struct drm_dp_phy_test_params *data = |
| &intel_dp->compliance.test_data.phytest; |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| enum pipe pipe = crtc->pipe; |
| u32 pattern_val; |
| |
| switch (data->phy_pattern) { |
| case DP_LINK_QUAL_PATTERN_DISABLE: |
| drm_dbg_kms(&dev_priv->drm, "Disable Phy Test Pattern\n"); |
| intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0); |
| if (DISPLAY_VER(dev_priv) >= 10) |
| intel_de_rmw(dev_priv, dp_tp_ctl_reg(encoder, crtc_state), |
| DP_TP_CTL_TRAIN_PAT4_SEL_MASK | DP_TP_CTL_LINK_TRAIN_MASK, |
| DP_TP_CTL_LINK_TRAIN_NORMAL); |
| break; |
| case DP_LINK_QUAL_PATTERN_D10_2: |
| drm_dbg_kms(&dev_priv->drm, "Set D10.2 Phy Test Pattern\n"); |
| intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), |
| DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_D10_2); |
| break; |
| case DP_LINK_QUAL_PATTERN_ERROR_RATE: |
| drm_dbg_kms(&dev_priv->drm, "Set Error Count Phy Test Pattern\n"); |
| intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), |
| DDI_DP_COMP_CTL_ENABLE | |
| DDI_DP_COMP_CTL_SCRAMBLED_0); |
| break; |
| case DP_LINK_QUAL_PATTERN_PRBS7: |
| drm_dbg_kms(&dev_priv->drm, "Set PRBS7 Phy Test Pattern\n"); |
| intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), |
| DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_PRBS7); |
| break; |
| case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM: |
| /* |
| * FIXME: Ideally pattern should come from DPCD 0x250. As |
| * current firmware of DPR-100 could not set it, so hardcoding |
| * now for complaince test. |
| */ |
| drm_dbg_kms(&dev_priv->drm, |
| "Set 80Bit Custom Phy Test Pattern 0x3e0f83e0 0x0f83e0f8 0x0000f83e\n"); |
| pattern_val = 0x3e0f83e0; |
| intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 0), pattern_val); |
| pattern_val = 0x0f83e0f8; |
| intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 1), pattern_val); |
| pattern_val = 0x0000f83e; |
| intel_de_write(dev_priv, DDI_DP_COMP_PAT(pipe, 2), pattern_val); |
| intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), |
| DDI_DP_COMP_CTL_ENABLE | |
| DDI_DP_COMP_CTL_CUSTOM80); |
| break; |
| case DP_LINK_QUAL_PATTERN_CP2520_PAT_1: |
| /* |
| * FIXME: Ideally pattern should come from DPCD 0x24A. As |
| * current firmware of DPR-100 could not set it, so hardcoding |
| * now for complaince test. |
| */ |
| drm_dbg_kms(&dev_priv->drm, "Set HBR2 compliance Phy Test Pattern\n"); |
| pattern_val = 0xFB; |
| intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), |
| DDI_DP_COMP_CTL_ENABLE | DDI_DP_COMP_CTL_HBR2 | |
| pattern_val); |
| break; |
| case DP_LINK_QUAL_PATTERN_CP2520_PAT_3: |
| if (DISPLAY_VER(dev_priv) < 10) { |
| drm_warn(&dev_priv->drm, "Platform does not support TPS4\n"); |
| break; |
| } |
| drm_dbg_kms(&dev_priv->drm, "Set TPS4 compliance Phy Test Pattern\n"); |
| intel_de_write(dev_priv, DDI_DP_COMP_CTL(pipe), 0x0); |
| intel_de_rmw(dev_priv, dp_tp_ctl_reg(encoder, crtc_state), |
| DP_TP_CTL_TRAIN_PAT4_SEL_MASK | DP_TP_CTL_LINK_TRAIN_MASK, |
| DP_TP_CTL_TRAIN_PAT4_SEL_TP4A | DP_TP_CTL_LINK_TRAIN_PAT4); |
| break; |
| default: |
| drm_warn(&dev_priv->drm, "Invalid Phy Test Pattern\n"); |
| } |
| } |
| |
| static void intel_dp_process_phy_request(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct drm_dp_phy_test_params *data = |
| &intel_dp->compliance.test_data.phytest; |
| u8 link_status[DP_LINK_STATUS_SIZE]; |
| |
| if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, DP_PHY_DPRX, |
| link_status) < 0) { |
| drm_dbg_kms(&i915->drm, "failed to get link status\n"); |
| return; |
| } |
| |
| /* retrieve vswing & pre-emphasis setting */ |
| intel_dp_get_adjust_train(intel_dp, crtc_state, DP_PHY_DPRX, |
| link_status); |
| |
| intel_dp_set_signal_levels(intel_dp, crtc_state, DP_PHY_DPRX); |
| |
| intel_dp_phy_pattern_update(intel_dp, crtc_state); |
| |
| drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET, |
| intel_dp->train_set, crtc_state->lane_count); |
| |
| drm_dp_set_phy_test_pattern(&intel_dp->aux, data, |
| intel_dp->dpcd[DP_DPCD_REV]); |
| } |
| |
| static u8 intel_dp_autotest_phy_pattern(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct drm_dp_phy_test_params *data = |
| &intel_dp->compliance.test_data.phytest; |
| |
| if (drm_dp_get_phy_test_pattern(&intel_dp->aux, data)) { |
| drm_dbg_kms(&i915->drm, "DP Phy Test pattern AUX read failure\n"); |
| return DP_TEST_NAK; |
| } |
| |
| /* Set test active flag here so userspace doesn't interrupt things */ |
| intel_dp->compliance.test_active = true; |
| |
| return DP_TEST_ACK; |
| } |
| |
| static void intel_dp_handle_test_request(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| u8 response = DP_TEST_NAK; |
| u8 request = 0; |
| int status; |
| |
| status = drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_REQUEST, &request); |
| if (status <= 0) { |
| drm_dbg_kms(&i915->drm, |
| "Could not read test request from sink\n"); |
| goto update_status; |
| } |
| |
| switch (request) { |
| case DP_TEST_LINK_TRAINING: |
| drm_dbg_kms(&i915->drm, "LINK_TRAINING test requested\n"); |
| response = intel_dp_autotest_link_training(intel_dp); |
| break; |
| case DP_TEST_LINK_VIDEO_PATTERN: |
| drm_dbg_kms(&i915->drm, "TEST_PATTERN test requested\n"); |
| response = intel_dp_autotest_video_pattern(intel_dp); |
| break; |
| case DP_TEST_LINK_EDID_READ: |
| drm_dbg_kms(&i915->drm, "EDID test requested\n"); |
| response = intel_dp_autotest_edid(intel_dp); |
| break; |
| case DP_TEST_LINK_PHY_TEST_PATTERN: |
| drm_dbg_kms(&i915->drm, "PHY_PATTERN test requested\n"); |
| response = intel_dp_autotest_phy_pattern(intel_dp); |
| break; |
| default: |
| drm_dbg_kms(&i915->drm, "Invalid test request '%02x'\n", |
| request); |
| break; |
| } |
| |
| if (response & DP_TEST_ACK) |
| intel_dp->compliance.test_type = request; |
| |
| update_status: |
| status = drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_RESPONSE, response); |
| if (status <= 0) |
| drm_dbg_kms(&i915->drm, |
| "Could not write test response to sink\n"); |
| } |
| |
| static bool intel_dp_link_ok(struct intel_dp *intel_dp, |
| u8 link_status[DP_LINK_STATUS_SIZE]) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| bool uhbr = intel_dp->link_rate >= 1000000; |
| bool ok; |
| |
| if (uhbr) |
| ok = drm_dp_128b132b_lane_channel_eq_done(link_status, |
| intel_dp->lane_count); |
| else |
| ok = drm_dp_channel_eq_ok(link_status, intel_dp->lane_count); |
| |
| if (ok) |
| return true; |
| |
| intel_dp_dump_link_status(intel_dp, DP_PHY_DPRX, link_status); |
| drm_dbg_kms(&i915->drm, |
| "[ENCODER:%d:%s] %s link not ok, retraining\n", |
| encoder->base.base.id, encoder->base.name, |
| uhbr ? "128b/132b" : "8b/10b"); |
| |
| return false; |
| } |
| |
| static void |
| intel_dp_mst_hpd_irq(struct intel_dp *intel_dp, u8 *esi, u8 *ack) |
| { |
| bool handled = false; |
| |
| drm_dp_mst_hpd_irq_handle_event(&intel_dp->mst_mgr, esi, ack, &handled); |
| |
| if (esi[1] & DP_CP_IRQ) { |
| intel_hdcp_handle_cp_irq(intel_dp->attached_connector); |
| ack[1] |= DP_CP_IRQ; |
| } |
| } |
| |
| static bool intel_dp_mst_link_status(struct intel_dp *intel_dp) |
| { |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| u8 link_status[DP_LINK_STATUS_SIZE] = {}; |
| const size_t esi_link_status_size = DP_LINK_STATUS_SIZE - 2; |
| |
| if (drm_dp_dpcd_read(&intel_dp->aux, DP_LANE0_1_STATUS_ESI, link_status, |
| esi_link_status_size) != esi_link_status_size) { |
| drm_err(&i915->drm, |
| "[ENCODER:%d:%s] Failed to read link status\n", |
| encoder->base.base.id, encoder->base.name); |
| return false; |
| } |
| |
| return intel_dp_link_ok(intel_dp, link_status); |
| } |
| |
| /** |
| * intel_dp_check_mst_status - service any pending MST interrupts, check link status |
| * @intel_dp: Intel DP struct |
| * |
| * Read any pending MST interrupts, call MST core to handle these and ack the |
| * interrupts. Check if the main and AUX link state is ok. |
| * |
| * Returns: |
| * - %true if pending interrupts were serviced (or no interrupts were |
| * pending) w/o detecting an error condition. |
| * - %false if an error condition - like AUX failure or a loss of link - is |
| * detected, or another condition - like a DP tunnel BW state change - needs |
| * servicing from the hotplug work. |
| */ |
| static bool |
| intel_dp_check_mst_status(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct intel_encoder *encoder = &dig_port->base; |
| bool link_ok = true; |
| bool reprobe_needed = false; |
| |
| drm_WARN_ON_ONCE(&i915->drm, intel_dp->active_mst_links < 0); |
| |
| for (;;) { |
| u8 esi[4] = {}; |
| u8 ack[4] = {}; |
| |
| if (!intel_dp_get_sink_irq_esi(intel_dp, esi)) { |
| drm_dbg_kms(&i915->drm, |
| "failed to get ESI - device may have failed\n"); |
| link_ok = false; |
| |
| break; |
| } |
| |
| drm_dbg_kms(&i915->drm, "DPRX ESI: %4ph\n", esi); |
| |
| if (intel_dp->active_mst_links > 0 && link_ok && |
| esi[3] & LINK_STATUS_CHANGED) { |
| if (!intel_dp_mst_link_status(intel_dp)) |
| link_ok = false; |
| ack[3] |= LINK_STATUS_CHANGED; |
| } |
| |
| intel_dp_mst_hpd_irq(intel_dp, esi, ack); |
| |
| if (esi[3] & DP_TUNNELING_IRQ) { |
| if (drm_dp_tunnel_handle_irq(i915->display.dp_tunnel_mgr, |
| &intel_dp->aux)) |
| reprobe_needed = true; |
| ack[3] |= DP_TUNNELING_IRQ; |
| } |
| |
| if (mem_is_zero(ack, sizeof(ack))) |
| break; |
| |
| if (!intel_dp_ack_sink_irq_esi(intel_dp, ack)) |
| drm_dbg_kms(&i915->drm, "Failed to ack ESI\n"); |
| |
| if (ack[1] & (DP_DOWN_REP_MSG_RDY | DP_UP_REQ_MSG_RDY)) |
| drm_dp_mst_hpd_irq_send_new_request(&intel_dp->mst_mgr); |
| } |
| |
| if (!link_ok || intel_dp->link.force_retrain) |
| intel_encoder_link_check_queue_work(encoder, 0); |
| |
| return !reprobe_needed; |
| } |
| |
| static void |
| intel_dp_handle_hdmi_link_status_change(struct intel_dp *intel_dp) |
| { |
| bool is_active; |
| u8 buf = 0; |
| |
| is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux); |
| if (intel_dp->frl.is_trained && !is_active) { |
| if (drm_dp_dpcd_readb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf) < 0) |
| return; |
| |
| buf &= ~DP_PCON_ENABLE_HDMI_LINK; |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf) < 0) |
| return; |
| |
| drm_dp_pcon_hdmi_frl_link_error_count(&intel_dp->aux, &intel_dp->attached_connector->base); |
| |
| intel_dp->frl.is_trained = false; |
| |
| /* Restart FRL training or fall back to TMDS mode */ |
| intel_dp_check_frl_training(intel_dp); |
| } |
| } |
| |
| static bool |
| intel_dp_needs_link_retrain(struct intel_dp *intel_dp) |
| { |
| u8 link_status[DP_LINK_STATUS_SIZE]; |
| |
| if (!intel_dp->link_trained) |
| return false; |
| |
| /* |
| * While PSR source HW is enabled, it will control main-link sending |
| * frames, enabling and disabling it so trying to do a retrain will fail |
| * as the link would or not be on or it could mix training patterns |
| * and frame data at the same time causing retrain to fail. |
| * Also when exiting PSR, HW will retrain the link anyways fixing |
| * any link status error. |
| */ |
| if (intel_psr_enabled(intel_dp)) |
| return false; |
| |
| if (intel_dp->link.force_retrain) |
| return true; |
| |
| if (drm_dp_dpcd_read_phy_link_status(&intel_dp->aux, DP_PHY_DPRX, |
| link_status) < 0) |
| return false; |
| |
| /* |
| * Validate the cached values of intel_dp->link_rate and |
| * intel_dp->lane_count before attempting to retrain. |
| * |
| * FIXME would be nice to user the crtc state here, but since |
| * we need to call this from the short HPD handler that seems |
| * a bit hard. |
| */ |
| if (!intel_dp_link_params_valid(intel_dp, intel_dp->link_rate, |
| intel_dp->lane_count)) |
| return false; |
| |
| if (intel_dp->link.retrain_disabled) |
| return false; |
| |
| if (intel_dp->link.seq_train_failures) |
| return true; |
| |
| /* Retrain if link not ok */ |
| return !intel_dp_link_ok(intel_dp, link_status); |
| } |
| |
| static bool intel_dp_has_connector(struct intel_dp *intel_dp, |
| const struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct intel_encoder *encoder; |
| enum pipe pipe; |
| |
| if (!conn_state->best_encoder) |
| return false; |
| |
| /* SST */ |
| encoder = &dp_to_dig_port(intel_dp)->base; |
| if (conn_state->best_encoder == &encoder->base) |
| return true; |
| |
| /* MST */ |
| for_each_pipe(i915, pipe) { |
| encoder = &intel_dp->mst_encoders[pipe]->base; |
| if (conn_state->best_encoder == &encoder->base) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| int intel_dp_get_active_pipes(struct intel_dp *intel_dp, |
| struct drm_modeset_acquire_ctx *ctx, |
| u8 *pipe_mask) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct drm_connector_list_iter conn_iter; |
| struct intel_connector *connector; |
| int ret = 0; |
| |
| *pipe_mask = 0; |
| |
| drm_connector_list_iter_begin(&i915->drm, &conn_iter); |
| for_each_intel_connector_iter(connector, &conn_iter) { |
| struct drm_connector_state *conn_state = |
| connector->base.state; |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| |
| if (!intel_dp_has_connector(intel_dp, conn_state)) |
| continue; |
| |
| crtc = to_intel_crtc(conn_state->crtc); |
| if (!crtc) |
| continue; |
| |
| ret = drm_modeset_lock(&crtc->base.mutex, ctx); |
| if (ret) |
| break; |
| |
| crtc_state = to_intel_crtc_state(crtc->base.state); |
| |
| drm_WARN_ON(&i915->drm, !intel_crtc_has_dp_encoder(crtc_state)); |
| |
| if (!crtc_state->hw.active) |
| continue; |
| |
| if (conn_state->commit) |
| drm_WARN_ON(&i915->drm, |
| !wait_for_completion_timeout(&conn_state->commit->hw_done, |
| msecs_to_jiffies(5000))); |
| |
| *pipe_mask |= BIT(crtc->pipe); |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| return ret; |
| } |
| |
| static bool intel_dp_is_connected(struct intel_dp *intel_dp) |
| { |
| struct intel_connector *connector = intel_dp->attached_connector; |
| |
| return connector->base.status == connector_status_connected || |
| intel_dp->is_mst; |
| } |
| |
| static int intel_dp_retrain_link(struct intel_encoder *encoder, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| u8 pipe_mask; |
| int ret; |
| |
| if (!intel_dp_is_connected(intel_dp)) |
| return 0; |
| |
| ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex, |
| ctx); |
| if (ret) |
| return ret; |
| |
| if (!intel_dp_needs_link_retrain(intel_dp)) |
| return 0; |
| |
| ret = intel_dp_get_active_pipes(intel_dp, ctx, &pipe_mask); |
| if (ret) |
| return ret; |
| |
| if (pipe_mask == 0) |
| return 0; |
| |
| if (!intel_dp_needs_link_retrain(intel_dp)) |
| return 0; |
| |
| drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] retraining link (forced %s)\n", |
| encoder->base.base.id, encoder->base.name, |
| str_yes_no(intel_dp->link.force_retrain)); |
| |
| ret = intel_modeset_commit_pipes(dev_priv, pipe_mask, ctx); |
| if (ret == -EDEADLK) |
| return ret; |
| |
| intel_dp->link.force_retrain = false; |
| |
| if (ret) |
| drm_dbg_kms(&dev_priv->drm, |
| "[ENCODER:%d:%s] link retraining failed: %pe\n", |
| encoder->base.base.id, encoder->base.name, |
| ERR_PTR(ret)); |
| |
| return ret; |
| } |
| |
| void intel_dp_link_check(struct intel_encoder *encoder) |
| { |
| struct drm_modeset_acquire_ctx ctx; |
| int ret; |
| |
| intel_modeset_lock_ctx_retry(&ctx, NULL, 0, ret) |
| ret = intel_dp_retrain_link(encoder, &ctx); |
| } |
| |
| void intel_dp_check_link_state(struct intel_dp *intel_dp) |
| { |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct intel_encoder *encoder = &dig_port->base; |
| |
| if (!intel_dp_is_connected(intel_dp)) |
| return; |
| |
| if (!intel_dp_needs_link_retrain(intel_dp)) |
| return; |
| |
| intel_encoder_link_check_queue_work(encoder, 0); |
| } |
| |
| static int intel_dp_prep_phy_test(struct intel_dp *intel_dp, |
| struct drm_modeset_acquire_ctx *ctx, |
| u8 *pipe_mask) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct drm_connector_list_iter conn_iter; |
| struct intel_connector *connector; |
| int ret = 0; |
| |
| *pipe_mask = 0; |
| |
| drm_connector_list_iter_begin(&i915->drm, &conn_iter); |
| for_each_intel_connector_iter(connector, &conn_iter) { |
| struct drm_connector_state *conn_state = |
| connector->base.state; |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| |
| if (!intel_dp_has_connector(intel_dp, conn_state)) |
| continue; |
| |
| crtc = to_intel_crtc(conn_state->crtc); |
| if (!crtc) |
| continue; |
| |
| ret = drm_modeset_lock(&crtc->base.mutex, ctx); |
| if (ret) |
| break; |
| |
| crtc_state = to_intel_crtc_state(crtc->base.state); |
| |
| drm_WARN_ON(&i915->drm, !intel_crtc_has_dp_encoder(crtc_state)); |
| |
| if (!crtc_state->hw.active) |
| continue; |
| |
| if (conn_state->commit && |
| !try_wait_for_completion(&conn_state->commit->hw_done)) |
| continue; |
| |
| *pipe_mask |= BIT(crtc->pipe); |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| return ret; |
| } |
| |
| static int intel_dp_do_phy_test(struct intel_encoder *encoder, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct intel_crtc *crtc; |
| u8 pipe_mask; |
| int ret; |
| |
| ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex, |
| ctx); |
| if (ret) |
| return ret; |
| |
| ret = intel_dp_prep_phy_test(intel_dp, ctx, &pipe_mask); |
| if (ret) |
| return ret; |
| |
| if (pipe_mask == 0) |
| return 0; |
| |
| drm_dbg_kms(&dev_priv->drm, "[ENCODER:%d:%s] PHY test\n", |
| encoder->base.base.id, encoder->base.name); |
| |
| for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc, pipe_mask) { |
| const struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| /* test on the MST master transcoder */ |
| if (DISPLAY_VER(dev_priv) >= 12 && |
| intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST) && |
| !intel_dp_mst_is_master_trans(crtc_state)) |
| continue; |
| |
| intel_dp_process_phy_request(intel_dp, crtc_state); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| void intel_dp_phy_test(struct intel_encoder *encoder) |
| { |
| struct drm_modeset_acquire_ctx ctx; |
| int ret; |
| |
| drm_modeset_acquire_init(&ctx, 0); |
| |
| for (;;) { |
| ret = intel_dp_do_phy_test(encoder, &ctx); |
| |
| if (ret == -EDEADLK) { |
| drm_modeset_backoff(&ctx); |
| continue; |
| } |
| |
| break; |
| } |
| |
| drm_modeset_drop_locks(&ctx); |
| drm_modeset_acquire_fini(&ctx); |
| drm_WARN(encoder->base.dev, ret, |
| "Acquiring modeset locks failed with %i\n", ret); |
| } |
| |
| static void intel_dp_check_device_service_irq(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| u8 val; |
| |
| if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) |
| return; |
| |
| if (drm_dp_dpcd_readb(&intel_dp->aux, |
| DP_DEVICE_SERVICE_IRQ_VECTOR, &val) != 1 || !val) |
| return; |
| |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_DEVICE_SERVICE_IRQ_VECTOR, val); |
| |
| if (val & DP_AUTOMATED_TEST_REQUEST) |
| intel_dp_handle_test_request(intel_dp); |
| |
| if (val & DP_CP_IRQ) |
| intel_hdcp_handle_cp_irq(intel_dp->attached_connector); |
| |
| if (val & DP_SINK_SPECIFIC_IRQ) |
| drm_dbg_kms(&i915->drm, "Sink specific irq unhandled\n"); |
| } |
| |
| static bool intel_dp_check_link_service_irq(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| bool reprobe_needed = false; |
| u8 val; |
| |
| if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) |
| return false; |
| |
| if (drm_dp_dpcd_readb(&intel_dp->aux, |
| DP_LINK_SERVICE_IRQ_VECTOR_ESI0, &val) != 1 || !val) |
| return false; |
| |
| if ((val & DP_TUNNELING_IRQ) && |
| drm_dp_tunnel_handle_irq(i915->display.dp_tunnel_mgr, |
| &intel_dp->aux)) |
| reprobe_needed = true; |
| |
| if (drm_dp_dpcd_writeb(&intel_dp->aux, |
| DP_LINK_SERVICE_IRQ_VECTOR_ESI0, val) != 1) |
| return reprobe_needed; |
| |
| if (val & HDMI_LINK_STATUS_CHANGED) |
| intel_dp_handle_hdmi_link_status_change(intel_dp); |
| |
| return reprobe_needed; |
| } |
| |
| /* |
| * According to DP spec |
| * 5.1.2: |
| * 1. Read DPCD |
| * 2. Configure link according to Receiver Capabilities |
| * 3. Use Link Training from 2.5.3.3 and 3.5.1.3 |
| * 4. Check link status on receipt of hot-plug interrupt |
| * |
| * intel_dp_short_pulse - handles short pulse interrupts |
| * when full detection is not required. |
| * Returns %true if short pulse is handled and full detection |
| * is NOT required and %false otherwise. |
| */ |
| static bool |
| intel_dp_short_pulse(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| u8 old_sink_count = intel_dp->sink_count; |
| bool reprobe_needed = false; |
| bool ret; |
| |
| /* |
| * Clearing compliance test variables to allow capturing |
| * of values for next automated test request. |
| */ |
| memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance)); |
| |
| /* |
| * Now read the DPCD to see if it's actually running |
| * If the current value of sink count doesn't match with |
| * the value that was stored earlier or dpcd read failed |
| * we need to do full detection |
| */ |
| ret = intel_dp_get_dpcd(intel_dp); |
| |
| if ((old_sink_count != intel_dp->sink_count) || !ret) { |
| /* No need to proceed if we are going to do full detect */ |
| return false; |
| } |
| |
| intel_dp_check_device_service_irq(intel_dp); |
| reprobe_needed = intel_dp_check_link_service_irq(intel_dp); |
| |
| /* Handle CEC interrupts, if any */ |
| drm_dp_cec_irq(&intel_dp->aux); |
| |
| intel_dp_check_link_state(intel_dp); |
| |
| intel_psr_short_pulse(intel_dp); |
| |
| switch (intel_dp->compliance.test_type) { |
| case DP_TEST_LINK_TRAINING: |
| drm_dbg_kms(&dev_priv->drm, |
| "Link Training Compliance Test requested\n"); |
| /* Send a Hotplug Uevent to userspace to start modeset */ |
| drm_kms_helper_hotplug_event(&dev_priv->drm); |
| break; |
| case DP_TEST_LINK_PHY_TEST_PATTERN: |
| drm_dbg_kms(&dev_priv->drm, |
| "PHY test pattern Compliance Test requested\n"); |
| /* |
| * Schedule long hpd to do the test |
| * |
| * FIXME get rid of the ad-hoc phy test modeset code |
| * and properly incorporate it into the normal modeset. |
| */ |
| reprobe_needed = true; |
| } |
| |
| return !reprobe_needed; |
| } |
| |
| /* XXX this is probably wrong for multiple downstream ports */ |
| static enum drm_connector_status |
| intel_dp_detect_dpcd(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| u8 *dpcd = intel_dp->dpcd; |
| u8 type; |
| |
| if (drm_WARN_ON(&i915->drm, intel_dp_is_edp(intel_dp))) |
| return connector_status_connected; |
| |
| lspcon_resume(dig_port); |
| |
| if (!intel_dp_get_dpcd(intel_dp)) |
| return connector_status_disconnected; |
| |
| intel_dp->mst_detect = intel_dp_mst_detect(intel_dp); |
| |
| /* if there's no downstream port, we're done */ |
| if (!drm_dp_is_branch(dpcd)) |
| return connector_status_connected; |
| |
| /* If we're HPD-aware, SINK_COUNT changes dynamically */ |
| if (intel_dp_has_sink_count(intel_dp) && |
| intel_dp->downstream_ports[0] & DP_DS_PORT_HPD) { |
| return intel_dp->sink_count ? |
| connector_status_connected : connector_status_disconnected; |
| } |
| |
| if (intel_dp->mst_detect == DRM_DP_MST) |
| return connector_status_connected; |
| |
| /* If no HPD, poke DDC gently */ |
| if (drm_probe_ddc(&intel_dp->aux.ddc)) |
| return connector_status_connected; |
| |
| /* Well we tried, say unknown for unreliable port types */ |
| if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { |
| type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK; |
| if (type == DP_DS_PORT_TYPE_VGA || |
| type == DP_DS_PORT_TYPE_NON_EDID) |
| return connector_status_unknown; |
| } else { |
| type = intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & |
| DP_DWN_STRM_PORT_TYPE_MASK; |
| if (type == DP_DWN_STRM_PORT_TYPE_ANALOG || |
| type == DP_DWN_STRM_PORT_TYPE_OTHER) |
| return connector_status_unknown; |
| } |
| |
| /* Anything else is out of spec, warn and ignore */ |
| drm_dbg_kms(&i915->drm, "Broken DP branch device, ignoring\n"); |
| return connector_status_disconnected; |
| } |
| |
| static enum drm_connector_status |
| edp_detect(struct intel_dp *intel_dp) |
| { |
| return connector_status_connected; |
| } |
| |
| void intel_digital_port_lock(struct intel_encoder *encoder) |
| { |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| |
| if (dig_port->lock) |
| dig_port->lock(dig_port); |
| } |
| |
| void intel_digital_port_unlock(struct intel_encoder *encoder) |
| { |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| |
| if (dig_port->unlock) |
| dig_port->unlock(dig_port); |
| } |
| |
| /* |
| * intel_digital_port_connected_locked - is the specified port connected? |
| * @encoder: intel_encoder |
| * |
| * In cases where there's a connector physically connected but it can't be used |
| * by our hardware we also return false, since the rest of the driver should |
| * pretty much treat the port as disconnected. This is relevant for type-C |
| * (starting on ICL) where there's ownership involved. |
| * |
| * The caller must hold the lock acquired by calling intel_digital_port_lock() |
| * when calling this function. |
| * |
| * Return %true if port is connected, %false otherwise. |
| */ |
| bool intel_digital_port_connected_locked(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| bool is_glitch_free = intel_tc_port_handles_hpd_glitches(dig_port); |
| bool is_connected = false; |
| intel_wakeref_t wakeref; |
| |
| with_intel_display_power(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref) { |
| unsigned long wait_expires = jiffies + msecs_to_jiffies_timeout(4); |
| |
| do { |
| is_connected = dig_port->connected(encoder); |
| if (is_connected || is_glitch_free) |
| break; |
| usleep_range(10, 30); |
| } while (time_before(jiffies, wait_expires)); |
| } |
| |
| return is_connected; |
| } |
| |
| bool intel_digital_port_connected(struct intel_encoder *encoder) |
| { |
| bool ret; |
| |
| intel_digital_port_lock(encoder); |
| ret = intel_digital_port_connected_locked(encoder); |
| intel_digital_port_unlock(encoder); |
| |
| return ret; |
| } |
| |
| static const struct drm_edid * |
| intel_dp_get_edid(struct intel_dp *intel_dp) |
| { |
| struct intel_connector *connector = intel_dp->attached_connector; |
| const struct drm_edid *fixed_edid = connector->panel.fixed_edid; |
| |
| /* Use panel fixed edid if we have one */ |
| if (fixed_edid) { |
| /* invalid edid */ |
| if (IS_ERR(fixed_edid)) |
| return NULL; |
| |
| return drm_edid_dup(fixed_edid); |
| } |
| |
| return drm_edid_read_ddc(&connector->base, &intel_dp->aux.ddc); |
| } |
| |
| static void |
| intel_dp_update_dfp(struct intel_dp *intel_dp, |
| const struct drm_edid *drm_edid) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct intel_connector *connector = intel_dp->attached_connector; |
| |
| intel_dp->dfp.max_bpc = |
| drm_dp_downstream_max_bpc(intel_dp->dpcd, |
| intel_dp->downstream_ports, drm_edid); |
| |
| intel_dp->dfp.max_dotclock = |
| drm_dp_downstream_max_dotclock(intel_dp->dpcd, |
| intel_dp->downstream_ports); |
| |
| intel_dp->dfp.min_tmds_clock = |
| drm_dp_downstream_min_tmds_clock(intel_dp->dpcd, |
| intel_dp->downstream_ports, |
| drm_edid); |
| intel_dp->dfp.max_tmds_clock = |
| drm_dp_downstream_max_tmds_clock(intel_dp->dpcd, |
| intel_dp->downstream_ports, |
| drm_edid); |
| |
| intel_dp->dfp.pcon_max_frl_bw = |
| drm_dp_get_pcon_max_frl_bw(intel_dp->dpcd, |
| intel_dp->downstream_ports); |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] DFP max bpc %d, max dotclock %d, TMDS clock %d-%d, PCON Max FRL BW %dGbps\n", |
| connector->base.base.id, connector->base.name, |
| intel_dp->dfp.max_bpc, |
| intel_dp->dfp.max_dotclock, |
| intel_dp->dfp.min_tmds_clock, |
| intel_dp->dfp.max_tmds_clock, |
| intel_dp->dfp.pcon_max_frl_bw); |
| |
| intel_dp_get_pcon_dsc_cap(intel_dp); |
| } |
| |
| static bool |
| intel_dp_can_ycbcr420(struct intel_dp *intel_dp) |
| { |
| if (source_can_output(intel_dp, INTEL_OUTPUT_FORMAT_YCBCR420) && |
| (!drm_dp_is_branch(intel_dp->dpcd) || intel_dp->dfp.ycbcr420_passthrough)) |
| return true; |
| |
| if (source_can_output(intel_dp, INTEL_OUTPUT_FORMAT_RGB) && |
| dfp_can_convert_from_rgb(intel_dp, INTEL_OUTPUT_FORMAT_YCBCR420)) |
| return true; |
| |
| if (source_can_output(intel_dp, INTEL_OUTPUT_FORMAT_YCBCR444) && |
| dfp_can_convert_from_ycbcr444(intel_dp, INTEL_OUTPUT_FORMAT_YCBCR420)) |
| return true; |
| |
| return false; |
| } |
| |
| static void |
| intel_dp_update_420(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct intel_connector *connector = intel_dp->attached_connector; |
| |
| intel_dp->dfp.ycbcr420_passthrough = |
| drm_dp_downstream_420_passthrough(intel_dp->dpcd, |
| intel_dp->downstream_ports); |
| /* on-board LSPCON always assumed to support 4:4:4->4:2:0 conversion */ |
| intel_dp->dfp.ycbcr_444_to_420 = |
| dp_to_dig_port(intel_dp)->lspcon.active || |
| drm_dp_downstream_444_to_420_conversion(intel_dp->dpcd, |
| intel_dp->downstream_ports); |
| intel_dp->dfp.rgb_to_ycbcr = |
| drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp->dpcd, |
| intel_dp->downstream_ports, |
| DP_DS_HDMI_BT709_RGB_YCBCR_CONV); |
| |
| connector->base.ycbcr_420_allowed = intel_dp_can_ycbcr420(intel_dp); |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] RGB->YcbCr conversion? %s, YCbCr 4:2:0 allowed? %s, YCbCr 4:4:4->4:2:0 conversion? %s\n", |
| connector->base.base.id, connector->base.name, |
| str_yes_no(intel_dp->dfp.rgb_to_ycbcr), |
| str_yes_no(connector->base.ycbcr_420_allowed), |
| str_yes_no(intel_dp->dfp.ycbcr_444_to_420)); |
| } |
| |
| static void |
| intel_dp_set_edid(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| struct intel_connector *connector = intel_dp->attached_connector; |
| const struct drm_edid *drm_edid; |
| bool vrr_capable; |
| |
| intel_dp_unset_edid(intel_dp); |
| drm_edid = intel_dp_get_edid(intel_dp); |
| connector->detect_edid = drm_edid; |
| |
| /* Below we depend on display info having been updated */ |
| drm_edid_connector_update(&connector->base, drm_edid); |
| |
| vrr_capable = intel_vrr_is_capable(connector); |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] VRR capable: %s\n", |
| connector->base.base.id, connector->base.name, str_yes_no(vrr_capable)); |
| drm_connector_set_vrr_capable_property(&connector->base, vrr_capable); |
| |
| intel_dp_update_dfp(intel_dp, drm_edid); |
| intel_dp_update_420(intel_dp); |
| |
| drm_dp_cec_attach(&intel_dp->aux, |
| connector->base.display_info.source_physical_address); |
| } |
| |
| static void |
| intel_dp_unset_edid(struct intel_dp *intel_dp) |
| { |
| struct intel_connector *connector = intel_dp->attached_connector; |
| |
| drm_dp_cec_unset_edid(&intel_dp->aux); |
| drm_edid_free(connector->detect_edid); |
| connector->detect_edid = NULL; |
| |
| intel_dp->dfp.max_bpc = 0; |
| intel_dp->dfp.max_dotclock = 0; |
| intel_dp->dfp.min_tmds_clock = 0; |
| intel_dp->dfp.max_tmds_clock = 0; |
| |
| intel_dp->dfp.pcon_max_frl_bw = 0; |
| |
| intel_dp->dfp.ycbcr_444_to_420 = false; |
| connector->base.ycbcr_420_allowed = false; |
| |
| drm_connector_set_vrr_capable_property(&connector->base, |
| false); |
| } |
| |
| static void |
| intel_dp_detect_dsc_caps(struct intel_dp *intel_dp, struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| /* Read DP Sink DSC Cap DPCD regs for DP v1.4 */ |
| if (!HAS_DSC(i915)) |
| return; |
| |
| if (intel_dp_is_edp(intel_dp)) |
| intel_edp_get_dsc_sink_cap(intel_dp->edp_dpcd[0], |
| connector); |
| else |
| intel_dp_get_dsc_sink_cap(intel_dp->dpcd[DP_DPCD_REV], |
| connector); |
| } |
| |
| static void |
| intel_dp_detect_sdp_caps(struct intel_dp *intel_dp) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| |
| intel_dp->as_sdp_supported = HAS_AS_SDP(i915) && |
| drm_dp_as_sdp_supported(&intel_dp->aux, intel_dp->dpcd); |
| } |
| |
| static int |
| intel_dp_detect(struct drm_connector *connector, |
| struct drm_modeset_acquire_ctx *ctx, |
| bool force) |
| { |
| struct drm_i915_private *dev_priv = to_i915(connector->dev); |
| struct intel_connector *intel_connector = |
| to_intel_connector(connector); |
| struct intel_dp *intel_dp = intel_attached_dp(intel_connector); |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct intel_encoder *encoder = &dig_port->base; |
| enum drm_connector_status status; |
| int ret; |
| |
| drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n", |
| connector->base.id, connector->name); |
| drm_WARN_ON(&dev_priv->drm, |
| !drm_modeset_is_locked(&dev_priv->drm.mode_config.connection_mutex)); |
| |
| if (!intel_display_device_enabled(dev_priv)) |
| return connector_status_disconnected; |
| |
| if (!intel_display_driver_check_access(dev_priv)) |
| return connector->status; |
| |
| /* Can't disconnect eDP */ |
| if (intel_dp_is_edp(intel_dp)) |
| status = edp_detect(intel_dp); |
| else if (intel_digital_port_connected(encoder)) |
| status = intel_dp_detect_dpcd(intel_dp); |
| else |
| status = connector_status_disconnected; |
| |
| if (status != connector_status_disconnected && |
| !intel_dp_mst_verify_dpcd_state(intel_dp)) |
| /* |
| * This requires retrying detection for instance to re-enable |
| * the MST mode that got reset via a long HPD pulse. The retry |
| * will happen either via the hotplug handler's retry logic, |
| * ensured by setting the connector here to SST/disconnected, |
| * or via a userspace connector probing in response to the |
| * hotplug uevent sent when removing the MST connectors. |
| */ |
| status = connector_status_disconnected; |
| |
| if (status == connector_status_disconnected) { |
| memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance)); |
| memset(intel_connector->dp.dsc_dpcd, 0, sizeof(intel_connector->dp.dsc_dpcd)); |
| intel_dp->psr.sink_panel_replay_support = false; |
| intel_dp->psr.sink_panel_replay_su_support = false; |
| |
| intel_dp_mst_disconnect(intel_dp); |
| |
| intel_dp_tunnel_disconnect(intel_dp); |
| |
| goto out; |
| } |
| |
| ret = intel_dp_tunnel_detect(intel_dp, ctx); |
| if (ret == -EDEADLK) |
| return ret; |
| |
| if (ret == 1) |
| intel_connector->base.epoch_counter++; |
| |
| if (!intel_dp_is_edp(intel_dp)) |
| intel_psr_init_dpcd(intel_dp); |
| |
| intel_dp_detect_dsc_caps(intel_dp, intel_connector); |
| |
| intel_dp_detect_sdp_caps(intel_dp); |
| |
| if (intel_dp->reset_link_params) { |
| intel_dp_reset_link_params(intel_dp); |
| intel_dp->reset_link_params = false; |
| } |
| |
| intel_dp_mst_configure(intel_dp); |
| |
| intel_dp_print_rates(intel_dp); |
| |
| if (intel_dp->is_mst) { |
| /* |
| * If we are in MST mode then this connector |
| * won't appear connected or have anything |
| * with EDID on it |
| */ |
| status = connector_status_disconnected; |
| goto out; |
| } |
| |
| /* |
| * Some external monitors do not signal loss of link synchronization |
| * with an IRQ_HPD, so force a link status check. |
| * |
| * TODO: this probably became redundant, so remove it: the link state |
| * is rechecked/recovered now after modesets, where the loss of |
| * synchronization tends to occur. |
| */ |
| if (!intel_dp_is_edp(intel_dp)) |
| intel_dp_check_link_state(intel_dp); |
| |
| /* |
| * Clearing NACK and defer counts to get their exact values |
| * while reading EDID which are required by Compliance tests |
| * 4.2.2.4 and 4.2.2.5 |
| */ |
| intel_dp->aux.i2c_nack_count = 0; |
| intel_dp->aux.i2c_defer_count = 0; |
| |
| intel_dp_set_edid(intel_dp); |
| if (intel_dp_is_edp(intel_dp) || |
| to_intel_connector(connector)->detect_edid) |
| status = connector_status_connected; |
| |
| intel_dp_check_device_service_irq(intel_dp); |
| |
| out: |
| if (status != connector_status_connected && !intel_dp->is_mst) |
| intel_dp_unset_edid(intel_dp); |
| |
| if (!intel_dp_is_edp(intel_dp)) |
| drm_dp_set_subconnector_property(connector, |
| status, |
| intel_dp->dpcd, |
| intel_dp->downstream_ports); |
| return status; |
| } |
| |
| static void |
| intel_dp_force(struct drm_connector *connector) |
| { |
| struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct intel_encoder *intel_encoder = &dig_port->base; |
| struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev); |
| |
| drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s]\n", |
| connector->base.id, connector->name); |
| |
| if (!intel_display_driver_check_access(dev_priv)) |
| return; |
| |
| intel_dp_unset_edid(intel_dp); |
| |
| if (connector->status != connector_status_connected) |
| return; |
| |
| intel_dp_set_edid(intel_dp); |
| } |
| |
| static int intel_dp_get_modes(struct drm_connector *connector) |
| { |
| struct intel_connector *intel_connector = to_intel_connector(connector); |
| int num_modes; |
| |
| /* drm_edid_connector_update() done in ->detect() or ->force() */ |
| num_modes = drm_edid_connector_add_modes(connector); |
| |
| /* Also add fixed mode, which may or may not be present in EDID */ |
| if (intel_dp_is_edp(intel_attached_dp(intel_connector))) |
| num_modes += intel_panel_get_modes(intel_connector); |
| |
| if (num_modes) |
| return num_modes; |
| |
| if (!intel_connector->detect_edid) { |
| struct intel_dp *intel_dp = intel_attached_dp(intel_connector); |
| struct drm_display_mode *mode; |
| |
| mode = drm_dp_downstream_mode(connector->dev, |
| intel_dp->dpcd, |
| intel_dp->downstream_ports); |
| if (mode) { |
| drm_mode_probed_add(connector, mode); |
| num_modes++; |
| } |
| } |
| |
| return num_modes; |
| } |
| |
| static int |
| intel_dp_connector_register(struct drm_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->dev); |
| struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| struct intel_lspcon *lspcon = &dig_port->lspcon; |
| int ret; |
| |
| ret = intel_connector_register(connector); |
| if (ret) |
| return ret; |
| |
| drm_dbg_kms(&i915->drm, "registering %s bus for %s\n", |
| intel_dp->aux.name, connector->kdev->kobj.name); |
| |
| intel_dp->aux.dev = connector->kdev; |
| ret = drm_dp_aux_register(&intel_dp->aux); |
| if (!ret) |
| drm_dp_cec_register_connector(&intel_dp->aux, connector); |
| |
| if (!intel_bios_encoder_is_lspcon(dig_port->base.devdata)) |
| return ret; |
| |
| /* |
| * ToDo: Clean this up to handle lspcon init and resume more |
| * efficiently and streamlined. |
| */ |
| if (lspcon_init(dig_port)) { |
| lspcon_detect_hdr_capability(lspcon); |
| if (lspcon->hdr_supported) |
| drm_connector_attach_hdr_output_metadata_property(connector); |
| } |
| |
| return ret; |
| } |
| |
| static void |
| intel_dp_connector_unregister(struct drm_connector *connector) |
| { |
| struct intel_dp *intel_dp = intel_attached_dp(to_intel_connector(connector)); |
| |
| drm_dp_cec_unregister_connector(&intel_dp->aux); |
| drm_dp_aux_unregister(&intel_dp->aux); |
| intel_connector_unregister(connector); |
| } |
| |
| void intel_dp_connector_sync_state(struct intel_connector *connector, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| if (crtc_state && crtc_state->dsc.compression_enable) { |
| drm_WARN_ON(&i915->drm, !connector->dp.dsc_decompression_aux); |
| connector->dp.dsc_decompression_enabled = true; |
| } else { |
| connector->dp.dsc_decompression_enabled = false; |
| } |
| } |
| |
| void intel_dp_encoder_flush_work(struct drm_encoder *_encoder) |
| { |
| struct intel_encoder *encoder = to_intel_encoder(_encoder); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| struct intel_dp *intel_dp = &dig_port->dp; |
| |
| intel_encoder_link_check_flush_work(encoder); |
| |
| intel_dp_mst_encoder_cleanup(dig_port); |
| |
| intel_dp_tunnel_destroy(intel_dp); |
| |
| intel_pps_vdd_off_sync(intel_dp); |
| |
| /* |
| * Ensure power off delay is respected on module remove, so that we can |
| * reduce delays at driver probe. See pps_init_timestamps(). |
| */ |
| intel_pps_wait_power_cycle(intel_dp); |
| |
| intel_dp_aux_fini(intel_dp); |
| } |
| |
| void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(intel_encoder); |
| |
| intel_pps_vdd_off_sync(intel_dp); |
| |
| intel_dp_tunnel_suspend(intel_dp); |
| } |
| |
| void intel_dp_encoder_shutdown(struct intel_encoder *intel_encoder) |
| { |
| struct intel_dp *intel_dp = enc_to_intel_dp(intel_encoder); |
| |
| intel_pps_wait_power_cycle(intel_dp); |
| } |
| |
| static int intel_modeset_tile_group(struct intel_atomic_state *state, |
| int tile_group_id) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct drm_connector_list_iter conn_iter; |
| struct drm_connector *connector; |
| int ret = 0; |
| |
| drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter); |
| drm_for_each_connector_iter(connector, &conn_iter) { |
| struct drm_connector_state *conn_state; |
| struct intel_crtc_state *crtc_state; |
| struct intel_crtc *crtc; |
| |
| if (!connector->has_tile || |
| connector->tile_group->id != tile_group_id) |
| continue; |
| |
| conn_state = drm_atomic_get_connector_state(&state->base, |
| connector); |
| if (IS_ERR(conn_state)) { |
| ret = PTR_ERR(conn_state); |
| break; |
| } |
| |
| crtc = to_intel_crtc(conn_state->crtc); |
| |
| if (!crtc) |
| continue; |
| |
| crtc_state = intel_atomic_get_new_crtc_state(state, crtc); |
| crtc_state->uapi.mode_changed = true; |
| |
| ret = drm_atomic_add_affected_planes(&state->base, &crtc->base); |
| if (ret) |
| break; |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| return ret; |
| } |
| |
| static int intel_modeset_affected_transcoders(struct intel_atomic_state *state, u8 transcoders) |
| { |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_crtc *crtc; |
| |
| if (transcoders == 0) |
| return 0; |
| |
| for_each_intel_crtc(&dev_priv->drm, crtc) { |
| struct intel_crtc_state *crtc_state; |
| int ret; |
| |
| crtc_state = intel_atomic_get_crtc_state(&state->base, crtc); |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| |
| if (!crtc_state->hw.enable) |
| continue; |
| |
| if (!(transcoders & BIT(crtc_state->cpu_transcoder))) |
| continue; |
| |
| crtc_state->uapi.mode_changed = true; |
| |
| ret = drm_atomic_add_affected_connectors(&state->base, &crtc->base); |
| if (ret) |
| return ret; |
| |
| ret = drm_atomic_add_affected_planes(&state->base, &crtc->base); |
| if (ret) |
| return ret; |
| |
| transcoders &= ~BIT(crtc_state->cpu_transcoder); |
| } |
| |
| drm_WARN_ON(&dev_priv->drm, transcoders != 0); |
| |
| return 0; |
| } |
| |
| static int intel_modeset_synced_crtcs(struct intel_atomic_state *state, |
| struct drm_connector *connector) |
| { |
| const struct drm_connector_state *old_conn_state = |
| drm_atomic_get_old_connector_state(&state->base, connector); |
| const struct intel_crtc_state *old_crtc_state; |
| struct intel_crtc *crtc; |
| u8 transcoders; |
| |
| crtc = to_intel_crtc(old_conn_state->crtc); |
| if (!crtc) |
| return 0; |
| |
| old_crtc_state = intel_atomic_get_old_crtc_state(state, crtc); |
| |
| if (!old_crtc_state->hw.active) |
| return 0; |
| |
| transcoders = old_crtc_state->sync_mode_slaves_mask; |
| if (old_crtc_state->master_transcoder != INVALID_TRANSCODER) |
| transcoders |= BIT(old_crtc_state->master_transcoder); |
| |
| return intel_modeset_affected_transcoders(state, |
| transcoders); |
| } |
| |
| static int intel_dp_connector_atomic_check(struct drm_connector *conn, |
| struct drm_atomic_state *_state) |
| { |
| struct drm_i915_private *dev_priv = to_i915(conn->dev); |
| struct intel_atomic_state *state = to_intel_atomic_state(_state); |
| struct drm_connector_state *conn_state = drm_atomic_get_new_connector_state(_state, conn); |
| struct intel_connector *intel_conn = to_intel_connector(conn); |
| struct intel_dp *intel_dp = enc_to_intel_dp(intel_conn->encoder); |
| int ret; |
| |
| ret = intel_digital_connector_atomic_check(conn, &state->base); |
| if (ret) |
| return ret; |
| |
| if (intel_dp_mst_source_support(intel_dp)) { |
| ret = drm_dp_mst_root_conn_atomic_check(conn_state, &intel_dp->mst_mgr); |
| if (ret) |
| return ret; |
| } |
| |
| if (!intel_connector_needs_modeset(state, conn)) |
| return 0; |
| |
| ret = intel_dp_tunnel_atomic_check_state(state, |
| intel_dp, |
| intel_conn); |
| if (ret) |
| return ret; |
| |
| /* |
| * We don't enable port sync on BDW due to missing w/as and |
| * due to not having adjusted the modeset sequence appropriately. |
| */ |
| if (DISPLAY_VER(dev_priv) < 9) |
| return 0; |
| |
| if (conn->has_tile) { |
| ret = intel_modeset_tile_group(state, conn->tile_group->id); |
| if (ret) |
| return ret; |
| } |
| |
| return intel_modeset_synced_crtcs(state, conn); |
| } |
| |
| static void intel_dp_oob_hotplug_event(struct drm_connector *connector, |
| enum drm_connector_status hpd_state) |
| { |
| struct intel_encoder *encoder = intel_attached_encoder(to_intel_connector(connector)); |
| struct drm_i915_private *i915 = to_i915(connector->dev); |
| bool hpd_high = hpd_state == connector_status_connected; |
| unsigned int hpd_pin = encoder->hpd_pin; |
| bool need_work = false; |
| |
| spin_lock_irq(&i915->irq_lock); |
| if (hpd_high != test_bit(hpd_pin, &i915->display.hotplug.oob_hotplug_last_state)) { |
| i915->display.hotplug.event_bits |= BIT(hpd_pin); |
| |
| __assign_bit(hpd_pin, &i915->display.hotplug.oob_hotplug_last_state, hpd_high); |
| need_work = true; |
| } |
| spin_unlock_irq(&i915->irq_lock); |
| |
| if (need_work) |
| intel_hpd_schedule_detection(i915); |
| } |
| |
| static const struct drm_connector_funcs intel_dp_connector_funcs = { |
| .force = intel_dp_force, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .atomic_get_property = intel_digital_connector_atomic_get_property, |
| .atomic_set_property = intel_digital_connector_atomic_set_property, |
| .late_register = intel_dp_connector_register, |
| .early_unregister = intel_dp_connector_unregister, |
| .destroy = intel_connector_destroy, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| .atomic_duplicate_state = intel_digital_connector_duplicate_state, |
| .oob_hotplug_event = intel_dp_oob_hotplug_event, |
| }; |
| |
| static const struct drm_connector_helper_funcs intel_dp_connector_helper_funcs = { |
| .detect_ctx = intel_dp_detect, |
| .get_modes = intel_dp_get_modes, |
| .mode_valid = intel_dp_mode_valid, |
| .atomic_check = intel_dp_connector_atomic_check, |
| }; |
| |
| enum irqreturn |
| intel_dp_hpd_pulse(struct intel_digital_port *dig_port, bool long_hpd) |
| { |
| struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); |
| struct intel_dp *intel_dp = &dig_port->dp; |
| u8 dpcd[DP_RECEIVER_CAP_SIZE]; |
| |
| if (dig_port->base.type == INTEL_OUTPUT_EDP && |
| (long_hpd || !intel_pps_have_panel_power_or_vdd(intel_dp))) { |
| /* |
| * vdd off can generate a long/short pulse on eDP which |
| * would require vdd on to handle it, and thus we |
| * would end up in an endless cycle of |
| * "vdd off -> long/short hpd -> vdd on -> detect -> vdd off -> ..." |
| */ |
| drm_dbg_kms(&i915->drm, |
| "ignoring %s hpd on eDP [ENCODER:%d:%s]\n", |
| long_hpd ? "long" : "short", |
| dig_port->base.base.base.id, |
| dig_port->base.base.name); |
| return IRQ_HANDLED; |
| } |
| |
| drm_dbg_kms(&i915->drm, "got hpd irq on [ENCODER:%d:%s] - %s\n", |
| dig_port->base.base.base.id, |
| dig_port->base.base.name, |
| long_hpd ? "long" : "short"); |
| |
| /* |
| * TBT DP tunnels require the GFX driver to read out the DPRX caps in |
| * response to long HPD pulses. The DP hotplug handler does that, |
| * however the hotplug handler may be blocked by another |
| * connector's/encoder's hotplug handler. Since the TBT CM may not |
| * complete the DP tunnel BW request for the latter connector/encoder |
| * waiting for this encoder's DPRX read, perform a dummy read here. |
| */ |
| if (long_hpd) |
| intel_dp_read_dprx_caps(intel_dp, dpcd); |
| |
| if (long_hpd) { |
| intel_dp->reset_link_params = true; |
| return IRQ_NONE; |
| } |
| |
| if (intel_dp->is_mst) { |
| if (!intel_dp_check_mst_status(intel_dp)) |
| return IRQ_NONE; |
| } else if (!intel_dp_short_pulse(intel_dp)) { |
| return IRQ_NONE; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static bool _intel_dp_is_port_edp(struct drm_i915_private *dev_priv, |
| const struct intel_bios_encoder_data *devdata, |
| enum port port) |
| { |
| /* |
| * eDP not supported on g4x. so bail out early just |
| * for a bit extra safety in case the VBT is bonkers. |
| */ |
| if (DISPLAY_VER(dev_priv) < 5) |
| return false; |
| |
| if (DISPLAY_VER(dev_priv) < 9 && port == PORT_A) |
| return true; |
| |
| return devdata && intel_bios_encoder_supports_edp(devdata); |
| } |
| |
| bool intel_dp_is_port_edp(struct drm_i915_private *i915, enum port port) |
| { |
| struct intel_display *display = &i915->display; |
| const struct intel_bios_encoder_data *devdata = |
| intel_bios_encoder_data_lookup(display, port); |
| |
| return _intel_dp_is_port_edp(i915, devdata, port); |
| } |
| |
| bool |
| intel_dp_has_gamut_metadata_dip(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| enum port port = encoder->port; |
| |
| if (intel_bios_encoder_is_lspcon(encoder->devdata)) |
| return false; |
| |
| if (DISPLAY_VER(i915) >= 11) |
| return true; |
| |
| if (port == PORT_A) |
| return false; |
| |
| if (IS_HASWELL(i915) || IS_BROADWELL(i915) || |
| DISPLAY_VER(i915) >= 9) |
| return true; |
| |
| return false; |
| } |
| |
| static void |
| intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connector) |
| { |
| struct drm_i915_private *dev_priv = to_i915(connector->dev); |
| enum port port = dp_to_dig_port(intel_dp)->base.port; |
| |
| if (!intel_dp_is_edp(intel_dp)) |
| drm_connector_attach_dp_subconnector_property(connector); |
| |
| if (!IS_G4X(dev_priv) && port != PORT_A) |
| intel_attach_force_audio_property(connector); |
| |
| intel_attach_broadcast_rgb_property(connector); |
| if (HAS_GMCH(dev_priv)) |
| drm_connector_attach_max_bpc_property(connector, 6, 10); |
| else if (DISPLAY_VER(dev_priv) >= 5) |
| drm_connector_attach_max_bpc_property(connector, 6, 12); |
| |
| /* Register HDMI colorspace for case of lspcon */ |
| if (intel_bios_encoder_is_lspcon(dp_to_dig_port(intel_dp)->base.devdata)) { |
| drm_connector_attach_content_type_property(connector); |
| intel_attach_hdmi_colorspace_property(connector); |
| } else { |
| intel_attach_dp_colorspace_property(connector); |
| } |
| |
| if (intel_dp_has_gamut_metadata_dip(&dp_to_dig_port(intel_dp)->base)) |
| drm_connector_attach_hdr_output_metadata_property(connector); |
| |
| if (HAS_VRR(dev_priv)) |
| drm_connector_attach_vrr_capable_property(connector); |
| } |
| |
| static void |
| intel_edp_add_properties(struct intel_dp *intel_dp) |
| { |
| struct intel_connector *connector = intel_dp->attached_connector; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| const struct drm_display_mode *fixed_mode = |
| intel_panel_preferred_fixed_mode(connector); |
| |
| intel_attach_scaling_mode_property(&connector->base); |
| |
| drm_connector_set_panel_orientation_with_quirk(&connector->base, |
| i915->display.vbt.orientation, |
| fixed_mode->hdisplay, |
| fixed_mode->vdisplay); |
| } |
| |
| static void intel_edp_backlight_setup(struct intel_dp *intel_dp, |
| struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = dp_to_i915(intel_dp); |
| enum pipe pipe = INVALID_PIPE; |
| |
| if (IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915)) { |
| /* |
| * Figure out the current pipe for the initial backlight setup. |
| * If the current pipe isn't valid, try the PPS pipe, and if that |
| * fails just assume pipe A. |
| */ |
| pipe = vlv_active_pipe(intel_dp); |
| |
| if (pipe != PIPE_A && pipe != PIPE_B) |
| pipe = intel_dp->pps.pps_pipe; |
| |
| if (pipe != PIPE_A && pipe != PIPE_B) |
| pipe = PIPE_A; |
| } |
| |
| intel_backlight_setup(connector, pipe); |
| } |
| |
| static bool intel_edp_init_connector(struct intel_dp *intel_dp, |
| struct intel_connector *intel_connector) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); |
| struct drm_connector *connector = &intel_connector->base; |
| struct drm_display_mode *fixed_mode; |
| struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base; |
| bool has_dpcd; |
| const struct drm_edid *drm_edid; |
| |
| if (!intel_dp_is_edp(intel_dp)) |
| return true; |
| |
| /* |
| * On IBX/CPT we may get here with LVDS already registered. Since the |
| * driver uses the only internal power sequencer available for both |
| * eDP and LVDS bail out early in this case to prevent interfering |
| * with an already powered-on LVDS power sequencer. |
| */ |
| if (intel_get_lvds_encoder(dev_priv)) { |
| drm_WARN_ON(&dev_priv->drm, |
| !(HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv))); |
| drm_info(&dev_priv->drm, |
| "LVDS was detected, not registering eDP\n"); |
| |
| return false; |
| } |
| |
| intel_bios_init_panel_early(display, &intel_connector->panel, |
| encoder->devdata); |
| |
| if (!intel_pps_init(intel_dp)) { |
| drm_info(&dev_priv->drm, |
| "[ENCODER:%d:%s] unusable PPS, disabling eDP\n", |
| encoder->base.base.id, encoder->base.name); |
| /* |
| * The BIOS may have still enabled VDD on the PPS even |
| * though it's unusable. Make sure we turn it back off |
| * and to release the power domain references/etc. |
| */ |
| goto out_vdd_off; |
| } |
| |
| /* |
| * Enable HPD sense for live status check. |
| * intel_hpd_irq_setup() will turn it off again |
| * if it's no longer needed later. |
| * |
| * The DPCD probe below will make sure VDD is on. |
| */ |
| intel_hpd_enable_detection(encoder); |
| |
| intel_alpm_init_dpcd(intel_dp); |
| |
| /* Cache DPCD and EDID for edp. */ |
| has_dpcd = intel_edp_init_dpcd(intel_dp, intel_connector); |
| |
| if (!has_dpcd) { |
| /* if this fails, presume the device is a ghost */ |
| drm_info(&dev_priv->drm, |
| "[ENCODER:%d:%s] failed to retrieve link info, disabling eDP\n", |
| encoder->base.base.id, encoder->base.name); |
| goto out_vdd_off; |
| } |
| |
| /* |
| * VBT and straps are liars. Also check HPD as that seems |
| * to be the most reliable piece of information available. |
| * |
| * ... expect on devices that forgot to hook HPD up for eDP |
| * (eg. Acer Chromebook C710), so we'll check it only if multiple |
| * ports are attempting to use the same AUX CH, according to VBT. |
| */ |
| if (intel_bios_dp_has_shared_aux_ch(encoder->devdata)) { |
| /* |
| * If this fails, presume the DPCD answer came |
| * from some other port using the same AUX CH. |
| * |
| * FIXME maybe cleaner to check this before the |
| * DPCD read? Would need sort out the VDD handling... |
| */ |
| if (!intel_digital_port_connected(encoder)) { |
| drm_info(&dev_priv->drm, |
| "[ENCODER:%d:%s] HPD is down, disabling eDP\n", |
| encoder->base.base.id, encoder->base.name); |
| goto out_vdd_off; |
| } |
| |
| /* |
| * Unfortunately even the HPD based detection fails on |
| * eg. Asus B360M-A (CFL+CNP), so as a last resort fall |
| * back to checking for a VGA branch device. Only do this |
| * on known affected platforms to minimize false positives. |
| */ |
| if (DISPLAY_VER(dev_priv) == 9 && drm_dp_is_branch(intel_dp->dpcd) && |
| (intel_dp->dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_TYPE_MASK) == |
| DP_DWN_STRM_PORT_TYPE_ANALOG) { |
| drm_info(&dev_priv->drm, |
| "[ENCODER:%d:%s] VGA converter detected, disabling eDP\n", |
| encoder->base.base.id, encoder->base.name); |
| goto out_vdd_off; |
| } |
| } |
| |
| mutex_lock(&dev_priv->drm.mode_config.mutex); |
| drm_edid = drm_edid_read_ddc(connector, connector->ddc); |
| if (!drm_edid) { |
| /* Fallback to EDID from ACPI OpRegion, if any */ |
| drm_edid = intel_opregion_get_edid(intel_connector); |
| if (drm_edid) |
| drm_dbg_kms(&dev_priv->drm, |
| "[CONNECTOR:%d:%s] Using OpRegion EDID\n", |
| connector->base.id, connector->name); |
| } |
| if (drm_edid) { |
| if (drm_edid_connector_update(connector, drm_edid) || |
| !drm_edid_connector_add_modes(connector)) { |
| drm_edid_connector_update(connector, NULL); |
| drm_edid_free(drm_edid); |
| drm_edid = ERR_PTR(-EINVAL); |
| } |
| } else { |
| drm_edid = ERR_PTR(-ENOENT); |
| } |
| |
| intel_bios_init_panel_late(display, &intel_connector->panel, encoder->devdata, |
| IS_ERR(drm_edid) ? NULL : drm_edid); |
| |
| intel_panel_add_edid_fixed_modes(intel_connector, true); |
| |
| /* MSO requires information from the EDID */ |
| intel_edp_mso_init(intel_dp); |
| |
| /* multiply the mode clock and horizontal timings for MSO */ |
| list_for_each_entry(fixed_mode, &intel_connector->panel.fixed_modes, head) |
| intel_edp_mso_mode_fixup(intel_connector, fixed_mode); |
| |
| /* fallback to VBT if available for eDP */ |
| if (!intel_panel_preferred_fixed_mode(intel_connector)) |
| intel_panel_add_vbt_lfp_fixed_mode(intel_connector); |
| |
| mutex_unlock(&dev_priv->drm.mode_config.mutex); |
| |
| if (!intel_panel_preferred_fixed_mode(intel_connector)) { |
| drm_info(&dev_priv->drm, |
| "[ENCODER:%d:%s] failed to find fixed mode for the panel, disabling eDP\n", |
| encoder->base.base.id, encoder->base.name); |
| goto out_vdd_off; |
| } |
| |
| intel_panel_init(intel_connector, drm_edid); |
| |
| intel_edp_backlight_setup(intel_dp, intel_connector); |
| |
| intel_edp_add_properties(intel_dp); |
| |
| intel_pps_init_late(intel_dp); |
| |
| return true; |
| |
| out_vdd_off: |
| intel_pps_vdd_off_sync(intel_dp); |
| |
| return false; |
| } |
| |
| static void intel_dp_modeset_retry_work_fn(struct work_struct *work) |
| { |
| struct intel_connector *intel_connector; |
| struct drm_connector *connector; |
| |
| intel_connector = container_of(work, typeof(*intel_connector), |
| modeset_retry_work); |
| connector = &intel_connector->base; |
| drm_dbg_kms(connector->dev, "[CONNECTOR:%d:%s]\n", connector->base.id, |
| connector->name); |
| |
| /* Grab the locks before changing connector property*/ |
| mutex_lock(&connector->dev->mode_config.mutex); |
| /* Set connector link status to BAD and send a Uevent to notify |
| * userspace to do a modeset. |
| */ |
| drm_connector_set_link_status_property(connector, |
| DRM_MODE_LINK_STATUS_BAD); |
| mutex_unlock(&connector->dev->mode_config.mutex); |
| /* Send Hotplug uevent so userspace can reprobe */ |
| drm_kms_helper_connector_hotplug_event(connector); |
| |
| drm_connector_put(connector); |
| } |
| |
| void intel_dp_init_modeset_retry_work(struct intel_connector *connector) |
| { |
| INIT_WORK(&connector->modeset_retry_work, |
| intel_dp_modeset_retry_work_fn); |
| } |
| |
| bool |
| intel_dp_init_connector(struct intel_digital_port *dig_port, |
| struct intel_connector *intel_connector) |
| { |
| struct drm_connector *connector = &intel_connector->base; |
| struct intel_dp *intel_dp = &dig_port->dp; |
| struct intel_encoder *intel_encoder = &dig_port->base; |
| struct drm_device *dev = intel_encoder->base.dev; |
| struct drm_i915_private *dev_priv = to_i915(dev); |
| enum port port = intel_encoder->port; |
| int type; |
| |
| /* Initialize the work for modeset in case of link train failure */ |
| intel_dp_init_modeset_retry_work(intel_connector); |
| |
| if (drm_WARN(dev, dig_port->max_lanes < 1, |
| "Not enough lanes (%d) for DP on [ENCODER:%d:%s]\n", |
| dig_port->max_lanes, intel_encoder->base.base.id, |
| intel_encoder->base.name)) |
| return false; |
| |
| intel_dp->reset_link_params = true; |
| intel_dp->pps.pps_pipe = INVALID_PIPE; |
| intel_dp->pps.active_pipe = INVALID_PIPE; |
| |
| /* Preserve the current hw state. */ |
| intel_dp->DP = intel_de_read(dev_priv, intel_dp->output_reg); |
| intel_dp->attached_connector = intel_connector; |
| |
| if (_intel_dp_is_port_edp(dev_priv, intel_encoder->devdata, port)) { |
| /* |
| * Currently we don't support eDP on TypeC ports, although in |
| * theory it could work on TypeC legacy ports. |
| */ |
| drm_WARN_ON(dev, intel_encoder_is_tc(intel_encoder)); |
| type = DRM_MODE_CONNECTOR_eDP; |
| intel_encoder->type = INTEL_OUTPUT_EDP; |
| |
| /* eDP only on port B and/or C on vlv/chv */ |
| if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) || |
| IS_CHERRYVIEW(dev_priv)) && |
| port != PORT_B && port != PORT_C)) |
| return false; |
| } else { |
| type = DRM_MODE_CONNECTOR_DisplayPort; |
| } |
| |
| intel_dp_set_default_sink_rates(intel_dp); |
| intel_dp_set_default_max_sink_lane_count(intel_dp); |
| |
| if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) |
| intel_dp->pps.active_pipe = vlv_active_pipe(intel_dp); |
| |
| intel_dp_aux_init(intel_dp); |
| intel_connector->dp.dsc_decompression_aux = &intel_dp->aux; |
| |
| drm_dbg_kms(&dev_priv->drm, |
| "Adding %s connector on [ENCODER:%d:%s]\n", |
| type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP", |
| intel_encoder->base.base.id, intel_encoder->base.name); |
| |
| drm_connector_init_with_ddc(dev, connector, &intel_dp_connector_funcs, |
| type, &intel_dp->aux.ddc); |
| drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs); |
| |
| if (!HAS_GMCH(dev_priv) && DISPLAY_VER(dev_priv) < 12) |
| connector->interlace_allowed = true; |
| |
| intel_connector->polled = DRM_CONNECTOR_POLL_HPD; |
| intel_connector->base.polled = intel_connector->polled; |
| |
| intel_connector_attach_encoder(intel_connector, intel_encoder); |
| |
| if (HAS_DDI(dev_priv)) |
| intel_connector->get_hw_state = intel_ddi_connector_get_hw_state; |
| else |
| intel_connector->get_hw_state = intel_connector_get_hw_state; |
| intel_connector->sync_state = intel_dp_connector_sync_state; |
| |
| if (!intel_edp_init_connector(intel_dp, intel_connector)) { |
| intel_dp_aux_fini(intel_dp); |
| goto fail; |
| } |
| |
| intel_dp_set_source_rates(intel_dp); |
| intel_dp_set_common_rates(intel_dp); |
| intel_dp_reset_link_params(intel_dp); |
| |
| /* init MST on ports that can support it */ |
| intel_dp_mst_encoder_init(dig_port, |
| intel_connector->base.base.id); |
| |
| intel_dp_add_properties(intel_dp, connector); |
| |
| if (is_hdcp_supported(dev_priv, port) && !intel_dp_is_edp(intel_dp)) { |
| int ret = intel_dp_hdcp_init(dig_port, intel_connector); |
| if (ret) |
| drm_dbg_kms(&dev_priv->drm, |
| "HDCP init failed, skipping.\n"); |
| } |
| |
| intel_dp->frl.is_trained = false; |
| intel_dp->frl.trained_rate_gbps = 0; |
| |
| intel_psr_init(intel_dp); |
| |
| return true; |
| |
| fail: |
| intel_display_power_flush_work(dev_priv); |
| drm_connector_cleanup(connector); |
| |
| return false; |
| } |
| |
| void intel_dp_mst_suspend(struct drm_i915_private *dev_priv) |
| { |
| struct intel_encoder *encoder; |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| for_each_intel_encoder(&dev_priv->drm, encoder) { |
| struct intel_dp *intel_dp; |
| |
| if (encoder->type != INTEL_OUTPUT_DDI) |
| continue; |
| |
| intel_dp = enc_to_intel_dp(encoder); |
| |
| if (!intel_dp_mst_source_support(intel_dp)) |
| continue; |
| |
| if (intel_dp->is_mst) |
| drm_dp_mst_topology_mgr_suspend(&intel_dp->mst_mgr); |
| } |
| } |
| |
| void intel_dp_mst_resume(struct drm_i915_private *dev_priv) |
| { |
| struct intel_encoder *encoder; |
| |
| if (!HAS_DISPLAY(dev_priv)) |
| return; |
| |
| for_each_intel_encoder(&dev_priv->drm, encoder) { |
| struct intel_dp *intel_dp; |
| int ret; |
| |
| if (encoder->type != INTEL_OUTPUT_DDI) |
| continue; |
| |
| intel_dp = enc_to_intel_dp(encoder); |
| |
| if (!intel_dp_mst_source_support(intel_dp)) |
| continue; |
| |
| ret = drm_dp_mst_topology_mgr_resume(&intel_dp->mst_mgr, |
| true); |
| if (ret) { |
| intel_dp->is_mst = false; |
| drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr, |
| false); |
| } |
| } |
| } |