| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * AD7887 SPI ADC driver |
| * |
| * Copyright 2010-2011 Analog Devices Inc. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/sysfs.h> |
| #include <linux/spi/spi.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/err.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/bitops.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/buffer.h> |
| |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| |
| #include <linux/platform_data/ad7887.h> |
| |
| #define AD7887_REF_DIS BIT(5) /* on-chip reference disable */ |
| #define AD7887_DUAL BIT(4) /* dual-channel mode */ |
| #define AD7887_CH_AIN1 BIT(3) /* convert on channel 1, DUAL=1 */ |
| #define AD7887_CH_AIN0 0 /* convert on channel 0, DUAL=0,1 */ |
| #define AD7887_PM_MODE1 0 /* CS based shutdown */ |
| #define AD7887_PM_MODE2 1 /* full on */ |
| #define AD7887_PM_MODE3 2 /* auto shutdown after conversion */ |
| #define AD7887_PM_MODE4 3 /* standby mode */ |
| |
| enum ad7887_channels { |
| AD7887_CH0, |
| AD7887_CH0_CH1, |
| AD7887_CH1, |
| }; |
| |
| /** |
| * struct ad7887_chip_info - chip specifc information |
| * @int_vref_mv: the internal reference voltage |
| * @channels: channels specification |
| * @num_channels: number of channels |
| * @dual_channels: channels specification in dual mode |
| * @num_dual_channels: number of channels in dual mode |
| */ |
| struct ad7887_chip_info { |
| u16 int_vref_mv; |
| const struct iio_chan_spec *channels; |
| unsigned int num_channels; |
| const struct iio_chan_spec *dual_channels; |
| unsigned int num_dual_channels; |
| }; |
| |
| struct ad7887_state { |
| struct spi_device *spi; |
| const struct ad7887_chip_info *chip_info; |
| struct regulator *reg; |
| struct spi_transfer xfer[4]; |
| struct spi_message msg[3]; |
| struct spi_message *ring_msg; |
| unsigned char tx_cmd_buf[4]; |
| |
| /* |
| * DMA (thus cache coherency maintenance) may require the |
| * transfer buffers to live in their own cache lines. |
| * Buffer needs to be large enough to hold two 16 bit samples and a |
| * 64 bit aligned 64 bit timestamp. |
| */ |
| unsigned char data[ALIGN(4, sizeof(s64)) + sizeof(s64)] __aligned(IIO_DMA_MINALIGN); |
| }; |
| |
| enum ad7887_supported_device_ids { |
| ID_AD7887 |
| }; |
| |
| static int ad7887_ring_preenable(struct iio_dev *indio_dev) |
| { |
| struct ad7887_state *st = iio_priv(indio_dev); |
| |
| /* We know this is a single long so can 'cheat' */ |
| switch (*indio_dev->active_scan_mask) { |
| case (1 << 0): |
| st->ring_msg = &st->msg[AD7887_CH0]; |
| break; |
| case (1 << 1): |
| st->ring_msg = &st->msg[AD7887_CH1]; |
| /* Dummy read: push CH1 setting down to hardware */ |
| spi_sync(st->spi, st->ring_msg); |
| break; |
| case ((1 << 1) | (1 << 0)): |
| st->ring_msg = &st->msg[AD7887_CH0_CH1]; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int ad7887_ring_postdisable(struct iio_dev *indio_dev) |
| { |
| struct ad7887_state *st = iio_priv(indio_dev); |
| |
| /* dummy read: restore default CH0 settin */ |
| return spi_sync(st->spi, &st->msg[AD7887_CH0]); |
| } |
| |
| static irqreturn_t ad7887_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct ad7887_state *st = iio_priv(indio_dev); |
| int b_sent; |
| |
| b_sent = spi_sync(st->spi, st->ring_msg); |
| if (b_sent) |
| goto done; |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, st->data, |
| iio_get_time_ns(indio_dev)); |
| done: |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct iio_buffer_setup_ops ad7887_ring_setup_ops = { |
| .preenable = &ad7887_ring_preenable, |
| .postdisable = &ad7887_ring_postdisable, |
| }; |
| |
| static int ad7887_scan_direct(struct ad7887_state *st, unsigned ch) |
| { |
| int ret = spi_sync(st->spi, &st->msg[ch]); |
| if (ret) |
| return ret; |
| |
| return (st->data[(ch * 2)] << 8) | st->data[(ch * 2) + 1]; |
| } |
| |
| static int ad7887_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, |
| int *val2, |
| long m) |
| { |
| int ret; |
| struct ad7887_state *st = iio_priv(indio_dev); |
| |
| switch (m) { |
| case IIO_CHAN_INFO_RAW: |
| ret = iio_device_claim_direct_mode(indio_dev); |
| if (ret) |
| return ret; |
| ret = ad7887_scan_direct(st, chan->address); |
| iio_device_release_direct_mode(indio_dev); |
| |
| if (ret < 0) |
| return ret; |
| *val = ret >> chan->scan_type.shift; |
| *val &= GENMASK(chan->scan_type.realbits - 1, 0); |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| if (st->reg) { |
| *val = regulator_get_voltage(st->reg); |
| if (*val < 0) |
| return *val; |
| *val /= 1000; |
| } else { |
| *val = st->chip_info->int_vref_mv; |
| } |
| |
| *val2 = chan->scan_type.realbits; |
| |
| return IIO_VAL_FRACTIONAL_LOG2; |
| } |
| return -EINVAL; |
| } |
| |
| #define AD7887_CHANNEL(x) { \ |
| .type = IIO_VOLTAGE, \ |
| .indexed = 1, \ |
| .channel = (x), \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ |
| .address = (x), \ |
| .scan_index = (x), \ |
| .scan_type = { \ |
| .sign = 'u', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| .shift = 0, \ |
| .endianness = IIO_BE, \ |
| }, \ |
| } |
| |
| static const struct iio_chan_spec ad7887_channels[] = { |
| AD7887_CHANNEL(0), |
| IIO_CHAN_SOFT_TIMESTAMP(1), |
| }; |
| |
| static const struct iio_chan_spec ad7887_dual_channels[] = { |
| AD7887_CHANNEL(0), |
| AD7887_CHANNEL(1), |
| IIO_CHAN_SOFT_TIMESTAMP(2), |
| }; |
| |
| static const struct ad7887_chip_info ad7887_chip_info_tbl[] = { |
| /* |
| * More devices added in future |
| */ |
| [ID_AD7887] = { |
| .channels = ad7887_channels, |
| .num_channels = ARRAY_SIZE(ad7887_channels), |
| .dual_channels = ad7887_dual_channels, |
| .num_dual_channels = ARRAY_SIZE(ad7887_dual_channels), |
| .int_vref_mv = 2500, |
| }, |
| }; |
| |
| static const struct iio_info ad7887_info = { |
| .read_raw = &ad7887_read_raw, |
| }; |
| |
| static void ad7887_reg_disable(void *data) |
| { |
| struct regulator *reg = data; |
| |
| regulator_disable(reg); |
| } |
| |
| static int ad7887_probe(struct spi_device *spi) |
| { |
| struct ad7887_platform_data *pdata = spi->dev.platform_data; |
| struct ad7887_state *st; |
| struct iio_dev *indio_dev; |
| uint8_t mode; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); |
| if (indio_dev == NULL) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| |
| st->reg = devm_regulator_get_optional(&spi->dev, "vref"); |
| if (IS_ERR(st->reg)) { |
| if (PTR_ERR(st->reg) != -ENODEV) |
| return PTR_ERR(st->reg); |
| |
| st->reg = NULL; |
| } |
| |
| if (st->reg) { |
| ret = regulator_enable(st->reg); |
| if (ret) |
| return ret; |
| |
| ret = devm_add_action_or_reset(&spi->dev, ad7887_reg_disable, st->reg); |
| if (ret) |
| return ret; |
| } |
| |
| st->chip_info = |
| &ad7887_chip_info_tbl[spi_get_device_id(spi)->driver_data]; |
| |
| st->spi = spi; |
| |
| indio_dev->name = spi_get_device_id(spi)->name; |
| indio_dev->info = &ad7887_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| /* Setup default message */ |
| |
| mode = AD7887_PM_MODE4; |
| if (!st->reg) |
| mode |= AD7887_REF_DIS; |
| if (pdata && pdata->en_dual) |
| mode |= AD7887_DUAL; |
| |
| st->tx_cmd_buf[0] = AD7887_CH_AIN0 | mode; |
| |
| st->xfer[0].rx_buf = &st->data[0]; |
| st->xfer[0].tx_buf = &st->tx_cmd_buf[0]; |
| st->xfer[0].len = 2; |
| |
| spi_message_init(&st->msg[AD7887_CH0]); |
| spi_message_add_tail(&st->xfer[0], &st->msg[AD7887_CH0]); |
| |
| if (pdata && pdata->en_dual) { |
| st->tx_cmd_buf[2] = AD7887_CH_AIN1 | mode; |
| |
| st->xfer[1].rx_buf = &st->data[0]; |
| st->xfer[1].tx_buf = &st->tx_cmd_buf[2]; |
| st->xfer[1].len = 2; |
| |
| st->xfer[2].rx_buf = &st->data[2]; |
| st->xfer[2].tx_buf = &st->tx_cmd_buf[0]; |
| st->xfer[2].len = 2; |
| |
| spi_message_init(&st->msg[AD7887_CH0_CH1]); |
| spi_message_add_tail(&st->xfer[1], &st->msg[AD7887_CH0_CH1]); |
| spi_message_add_tail(&st->xfer[2], &st->msg[AD7887_CH0_CH1]); |
| |
| st->xfer[3].rx_buf = &st->data[2]; |
| st->xfer[3].tx_buf = &st->tx_cmd_buf[2]; |
| st->xfer[3].len = 2; |
| |
| spi_message_init(&st->msg[AD7887_CH1]); |
| spi_message_add_tail(&st->xfer[3], &st->msg[AD7887_CH1]); |
| |
| indio_dev->channels = st->chip_info->dual_channels; |
| indio_dev->num_channels = st->chip_info->num_dual_channels; |
| } else { |
| indio_dev->channels = st->chip_info->channels; |
| indio_dev->num_channels = st->chip_info->num_channels; |
| } |
| |
| ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, |
| &iio_pollfunc_store_time, |
| &ad7887_trigger_handler, &ad7887_ring_setup_ops); |
| if (ret) |
| return ret; |
| |
| return devm_iio_device_register(&spi->dev, indio_dev); |
| } |
| |
| static const struct spi_device_id ad7887_id[] = { |
| { "ad7887", ID_AD7887 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(spi, ad7887_id); |
| |
| static struct spi_driver ad7887_driver = { |
| .driver = { |
| .name = "ad7887", |
| }, |
| .probe = ad7887_probe, |
| .id_table = ad7887_id, |
| }; |
| module_spi_driver(ad7887_driver); |
| |
| MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); |
| MODULE_DESCRIPTION("Analog Devices AD7887 ADC"); |
| MODULE_LICENSE("GPL v2"); |